Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB 27790-2020 |
City gas pressure regulator
城镇燃气调压器 |
China National Standards pressure |
 English PDF |
| GB 27791-2020 |
City gas pressure regulating installation 城镇燃气调压箱 |
China National Standards pressure |
English PDF |
| GB/T 39194-2020 |
Technical requirement of heat treatment for vacuum low pressure carburizing high pressure gas quenching 真空低压渗碳高压气淬热处理技术要求 |
China National Standards pressure |
English PDF |
| GB 39177-2020 |
Minimum allowable values of energy efficiency and energy efficiency grades for electric pressure cookers 电压力锅能效限定值及能效等级 |
China National Standards pressure |
English PDF |
| GB/T 38942-2020 |
pressure piping code—Utility piping 压力管道规范 公用管道 |
China National Standards pressure |
English PDF |
| GB/T 2423.27-2020 |
Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests 环境试验 第2部分：试验方法 试验方法和导则：温度/低气压或温度/湿度/低气压综合试验 |
China National Standards pressure |
English PDF |
| GB/T 38594-2020 |
Water supply devices with superimposing pipe pressure 管网叠压供水设备 |
China National Standards pressure |
English PDF |
| GB/T 38657-2020 |
Specifications for low pressure feed water heater for conventional island in nuclear power station 核电厂常规岛低压加热器技术条件 |
China National Standards pressure |
English PDF |
| GB/T 38653-2020 |
Specifications for high pressure feed water heater for conventional island in nuclear power station 核电厂常规岛高压加热器技术条件 |
China National Standards pressure |
English PDF |
| GB/T 38523-2020 |
Preparation of mixed gas pressure method 混合气体的制备 压力法 |
China National Standards pressure |
English PDF |
| GB/T 38512-2020 |
Aluminum and aluminum alloy tubes for the pressure vessel 压力容器用铝及铝合金管材 |
China National Standards pressure |
English PDF |
| GB/T 20801.1-2020 |
pressure piping code--Industrial piping--Part 1: General 压力管道规范 工业管道 第1部分:总则 |
China National Standards pressure |
English PDF |
| GB/T 39709-2020 |
Test methods of multiple units glass, windiows static pressure and windiows sealing performance 动车组玻璃、车窗耐静压及车窗密封性能试验方法 |
China National Standards pressure |
English PDF |
| GB/T 25178-2020 |
Reduced-pressure type backflow preventer 减压型倒流防止器 |
China National Standards pressure |
English PDF |
| GB/T 39383-2020 |
Thermoplastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type joints 埋地用无压热塑性塑料管道系统 弹性密封圈接头的密封性能试验方法 |
China National Standards pressure |
English PDF |
| GB/T 39379-2020 |
Thermoplastics piping systems for non-pressure applications—Test method for watertightness 无压热塑性塑料管道系统 水密性试验方法 |
China National Standards pressure |
English PDF |
| GB/T 26135-2020 |
High pressure cleaning unit 高压清洗机 |
China National Standards pressure |
English PDF |
| GB/T 20801.6-2020 |
pressure piping code—Industrial piping—Part 6:Safeguarding 压力管道规范 工业管道 第6部分：安全防护 |
China National Standards pressure |
English PDF |
| GB/T 20801.5-2020 |
pressure piping code—Industrial piping—Part 5:Inspection and testing 压力管道规范 工业管道 第5部分:检验与试验 |
China National Standards pressure |
English PDF |
| GB/T 20801.4-2020 |
pressure piping code—Industrial piping—Part 4:Fabrication and assembly 压力管道规范 工业管道 第4部分:制作与安装 |
China National Standards pressure |
English PDF |
| GB/T 20801.3-2020 |
pressure pipng code—Industrial piping—Part 3:Design and calculation 压力管道规范 工业管道 第3部分：设计和计算 |
China National Standards pressure |
English PDF |
| GB/T 20801.2-2020 |
pressure piping code—Industrial piping—Part 2:Materials 压力管道规范 工业管道 第2部分:材料 |
China National Standards pressure |
English PDF |
| GB/T 18997.2-2020 |
Plastic/aluminum/ plastic composite pressure pipes—Part 2: Composite pipes butt-welded by aluminum pipe 铝塑复合压力管 第2部分：铝管对接焊式铝塑管 |
China National Standards pressure |
English PDF |
| GB/T 18997.1-2020 |
Plastic/aluminum/plastic composite pressure pipes—Part 1: Composite pipes overlap-welded by aluminum pipe 铝塑复合压力管 第1部分：铝管搭接焊式铝塑管 |
China National Standards pressure |
English PDF |
| GB/T 39493-2020 |
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—pressure regulators 燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 压力调节装置 |
China National Standards pressure |
English PDF |
| GB/T 39311-2020 |
Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification 热塑性软管和软管组合件 液压用钢丝或合成纱线增强单一压力型 规范 |
China National Standards pressure |
English PDF |
| GB/T 39309-2020 |
Rubber hoses and hose assemblies—Wire- or textile-reinforced single-pressure types for hydraulic applications—Specification 橡胶软管和软管组合件 液压用钢丝或织物增强单一压力型 规范 |
China National Standards pressure |
English PDF |
| GB/T 15331-2020 |
Test method for water vapor transmission rate of pressure-sensitive tapes 压敏胶粘带水蒸气透过率试验方法 |
China National Standards pressure |
English PDF |
| GB/T 15330-2020 |
Test method for water penetration rate of pressure-sensitive tapes 压敏胶粘带水渗透率试验方法 |
China National Standards pressure |
English PDF |
| GB/T 23711.8-2019 |
Test method for pressure vessels lined with plastics—Part 8:High-resistance testing 塑料衬里压力容器试验方法 第8部分：耐高电阻试验 |
China National Standards pressure |
English PDF |
| GB/T 23711.7-2019 |
Test method for pressure vessels lined with plastics—Part 7:Leakage testing 塑料衬里压力容器试验方法 第7部分：泄漏试验 |
China National Standards pressure |
English PDF |
| GB/T 23711.6-2019 |
Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing 塑料衬里压力容器试验方法 第6部分：耐压试验 |
China National Standards pressure |
English PDF |
| GB/T 23711.5-2019 |
Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection 塑料衬里压力容器试验方法 第5部分：冷热循环检验 |
China National Standards pressure |
English PDF |
| GB/T 23711.4-2019 |
Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection 塑料衬里压力容器试验方法 第4部分：耐负压检验 |
China National Standards pressure |
English PDF |
| GB/T 23711.3-2019 |
Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 |
China National Standards pressure |
English PDF |
| GB/T 23711.2-2019 |
Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 |
China National Standards pressure |
English PDF |
| GB/T 23711.1-2019 |
Test method for pressure vessels lined with plastics—Part 1:Spark testing 塑料衬里压力容器试验方法 第1部分：电火花试验 |
China National Standards pressure |
English PDF |
| GB/T 18442.4-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 4：Fabrication 固定式真空绝热深冷压力容器 第4部分：制造 |
China National Standards pressure |
English PDF |
| GB/T 18442.3-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 3：Design 固定式真空绝热深冷压力容器 第3部分：设计 |
China National Standards pressure |
English PDF |
| GB/T 18442.2-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 2:Materials 固定式真空绝热深冷压力容器 第2部分:材料 |
China National Standards pressure |
English PDF |
| GB/T 18442.1-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 1:General requirements 固定式真空绝热深冷压力容器 第1部分:总则 |
China National Standards pressure |
English PDF |
| GB/T 7755.2-2019 |
Rubber, vulcanized or thermoplastic—Determination of permeability to gases—Part 2: Equal-pressure methods 硫化橡胶或热塑性橡胶 透气性的测定 第2部分：等压法 |
China National Standards pressure |
English PDF |
| GB/T 18442.6-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 6：Safety protection 固定式真空绝热深冷压力容器 第6部分：安全防护 |
China National Standards pressure |
English PDF |
| GB/T 18442.5-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 5：Inspection and testing 固定式真空绝热深冷压力容器 第5部分：检验与试验 |
China National Standards pressure |
English PDF |
| GB/T 23711.7-2019 |
Test method for pressure vessels lined with plastics—Part 7:Leakage testing 塑料衬里压力容器试验方法 第7部分：泄漏试验 |
China National Standards pressure |
English PDF |
| GB/T 23711.6-2019 |
Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing 塑料衬里压力容器试验方法 第6部分：耐压试验 |
China National Standards pressure |
English PDF |
| GB/T 23711.5-2019 |
Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection 塑料衬里压力容器试验方法 第5部分：冷热循环检验 |
China National Standards pressure |
English PDF |
| GB/T 23711.4-2019 |
Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection 塑料衬里压力容器试验方法 第4部分：耐负压检验 |
China National Standards pressure |
English PDF |
| GB/T 23711.3-2019 |
Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 |
China National Standards pressure |
English PDF |
| GB/T 23711.2-2019 |
Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 |
China National Standards pressure |
English PDF |
| GB/T 18442.4-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 4：Fabrication 固定式真空绝热深冷压力容器 第4部分：制造 |
China National Standards pressure |
English PDF |
| GB/T 18442.3-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 3：Design 固定式真空绝热深冷压力容器 第3部分：设计 |
China National Standards pressure |
English PDF |
| GB/T 18442.2-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 2:Materials 固定式真空绝热深冷压力容器 第2部分:材料 |
China National Standards pressure |
English PDF |
| GB/T 18442.1-2019 |
Static vacuum insulated cryogenic pressure vessels—Part 1:General requirements 固定式真空绝热深冷压力容器 第1部分:总则 |
China National Standards pressure |
English PDF |
| GB/T 7755.2-2019 |
Rubber, vulcanized or thermoplastic—Determination of permeability to gases—Part 2: Equal-pressure methods 硫化橡胶或热塑性橡胶 透气性的测定 第2部分：等压法 |
China National Standards pressure |
English PDF |
| GB 18564.1-2019 |
Road tanker for dangerous liquid goods transportation—Part1:Technical requirements of atmospheric pressure metal tank 道路运输液体危险货物罐式车辆 第1部分：金属常压罐体技术要求 |
China National Standards pressure |
English PDF |
| GB/T 5922-2008 |
Motor vehicles and towed vehicles - pressure test connection for compressed-air pneumatic braking equipment 汽车和挂车 气压制动装置压力测试连接器技术要求《第1号修改单》 |
China National Standards pressure |
English PDF |
| GB/T 5310-2017 |
Seamless steel tubes and pipes for high pressure boiler 高压锅炉用无缝钢管《第01号修改单》 |
China National Standards pressure |
English PDF |
| GB/T 37916-2019 |
Safety specification for small electric high pressure cleaning/washer 小型电动高压清洗机安全规范 |
China National Standards pressure |
English PDF |
| GB/T 37892-2019 |
Digital integrated full frequency conversion controlled constant pressure water supply equipment 数字集成全变频控制恒压供水设备 |
China National Standards pressure |
English PDF |
| GB/T 37888-2019 |
Sealant material in terrestrial photovoltaic(PV) modules—pressure sensitive adhesive tape 地面光伏组件用密封材料 压敏胶粘带 |
China National Standards pressure |
English PDF |
| GB/T 37825-2019 |
Test method for simulating wind pressure resistance of building glass under the uniform static loads 建筑玻璃均布静载模拟风压试验方法 |
China National Standards pressure |
English PDF |
| GB/T 37816-2019 |
Selection and installation of pressure relief devices on pressure equipment 承压设备安全泄放装置选用与安装 |
China National Standards pressure |
English PDF |
| GB/T 16253-2019 |
Steel castings for pressure purposes 承压钢铸件 |
China National Standards pressure |
English PDF |
| GB/T 19624-2019 |
Safety assessment of in-service pressure vessels containing defects 在用含缺陷压力容器安全评定 |
China National Standards pressure |
English PDF |
| GB/T 19314.5-2019 |
Small craft—Hull construction and scantlings—Part 5:Design pressures for monohulls,design stresses,scantlings determination 小艇 艇体结构和构件尺寸 第5部分：单体船设计压力、设计应力、构件尺寸的确定 |
China National Standards pressure |
English PDF |
| GB/T 19314.4-2019 |
Small craft—Hull construction and scantlings—Part 5:Design pressures for monohulls,design stresses,scantlings determination 小艇 艇体结构和构件尺寸 第4部分：车间和制造 |
China National Standards pressure |
English PDF |
| GB/T 2423.63-2019 |
Environmental testing—Part 2:Test methods—Test:combined temperature(cold and heat)/low air pressure/vibration(mixed mode) 环境试验 第2部分:试验方法 试验:温度(低温、高温)/低气压/振动(混合模式)综合 |
China National Standards pressure |
English PDF |
| GB/T 1048-2019 |
Pipework components—Definition and selection of nominal pressure 管道元件 公称压力的定义和选用 |
China National Standards pressure |
English PDF |
| GB/T 32065.14-2019 |
Environmental test methods for oceanographic instruments—Part 15：Hydrostatic pressure test 海洋仪器环境试验方法 第14部分:振动试验 |
China National Standards pressure |
English PDF |
| GB/T 26136-2018 |
Ultra-high pressure waterjet cutting machine 超高压水切割机 |
China National Standards pressure |
English PDF |
| GB/T 2980-2018 |
Size designation，dimensions,inflation pressure and load capacity for earth-mover tyres 工程机械轮胎规格、尺寸、气压与负荷 |
China National Standards pressure |
English PDF |
| GB/T 22038-2018 |
Method of automobile tyre static contact pressure distribution 汽车轮胎静态接地压力分布试验方法 |
China National Standards pressure |
English PDF |
| GB/T 17248.2-2018 |
Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections 声学-机器和设备发射的噪声-在一个反射面上方可忽略环境修正的近似自由场测定工作位置和其他指定位置的发射声压级 |
China National Standards pressure |
English PDF |
| GB/T 17248.3-2018 |
Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections 声学-机器和设备发射的噪声-采用近似环境修正测定工作位置和其他指定位置的发射声压级 |
China National Standards pressure |
English PDF |
| GB/T 17248.5-2018 |
Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections 声学-机器和设备发射的噪声-采用准确环境修正测定工作位置和其他指定位置的发射声压级 |
China National Standards pressure |
English PDF |
| GB/T 4974-2018 |
Air compressors,rock drilling machines and pneumatic tools—Preferred pressures 空压机、凿岩机械与气动工具 优先压力 |
China National Standards pressure |
English PDF |
| GB/T 20409-2018 |
Seamless multi-rifled steel tubes for high-pressure boiler 高压锅炉用内螺纹无缝钢管 |
China National Standards pressure |
English PDF |
| GB/T 35013-2018 |
Fitness-for-service assessment of pressure equipments 承压设备合于使用评价 |
China National Standards pressure |
English PDF |
| GB/T 35014-2018 |
Building construction machinery and equipment—Automatic pressure grouting machine for prestressing 建筑施工机械与设备 预应力用自动压浆机 |
China National Standards pressure |
English PDF |
| GB/T 36411-2018 |
Intelligent pressure instrument－General technical requirements 智能压力仪表 通用技术条件 |
China National Standards pressure |
English PDF |
| GB/T 12756-2018 |
Zinc-coated steel wire ropes for high-pressure rubber hose 高压胶管用镀锌钢丝绳 |
China National Standards pressure |
English PDF |
| GB/T 20441.2-2018 |
Electroacoustics—Measurement microphones—Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique 电声学 测量传声器 第2部分：采用互易技术对实验室标准传声器声压校准的原级方法 |
China National Standards pressure |
English PDF |
| GB/T 7755.1-2018 |
Rubber,vulcanized or thermoplastic—Determination of permeability to gases—Part 1:Differential-pressure methods 硫化橡胶或热塑性橡胶 透气性的测定 第1部分：压差法 |
China National Standards pressure |
English PDF |
| GB/T 36703-2018 |
Hydraulic fluid power—pressure switches—Mounting surfaces 液压传动 压力开关 安装面 |
China National Standards pressure |
English PDF |
| GB/T 16749-2018 |
Bellows expansion joints for pressure vessel 压力容器波形膨胀节 |
China National Standards pressure |
English PDF |
| GB/T 36580-2018 |
Test method of model propeller for cavitation observation and pressure fluctuation measurement 船舶螺旋桨空泡脉动压力模型试验方法 |
China National Standards pressure |
English PDF |
| GB/T 36588-2018 |
Safety devices for protection against excessive pressure—Common data 过压保护安全装置 通用数据 |
China National Standards pressure |
English PDF |
| GB/T 36669.1-2018 |
In-service pressure vessel inspection—Part 1: Hydrogenation reactor 在用压力容器检验 第1部分：加氢反应器 |
China National Standards pressure |
English PDF |
| GB 36660-2018 |
Low-pressure carbon dioxide inerting protection equipment 低压二氧化碳气体惰化保护装置 |
China National Standards pressure |
English PDF |
| GB/T 36500-2018 |
Commercial pressure cooker 商用压力锅 |
China National Standards pressure |
English PDF |
| GB/T 35930-2018 |
Determination of vapor pressure of chemical products—Thermogravimetry method 化工产品饱和蒸气压的测定 热重法 |
China National Standards pressure |
English PDF |
| GB/T 35974.2-2018 |
Plastics and plastic lining pressure vessels—Part 2: Material 塑料及其衬里制压力容器 第2部分：材料 |
China National Standards pressure |
English PDF |
| GB/T 35974.3-2018 |
Plastics and plastic lining pressure vessels—Part 3:Design 塑料及其衬里制压力容器 第3部分：设计 |
China National Standards pressure |
English PDF |
| GB 35844-2018 |
pressure regulators for liquefied petroleum gas cylinders 瓶装液化石油气调压器 |
China National Standards pressure |
English PDF |
| GB/T 35974.1-2018 |
Plastics and plastic lining pressure vessels—Part 1: General requirements 塑料及其衬里制压力容器 第1部分：通用要求 |
China National Standards pressure |
English PDF |
| GB/T 35974.5-2018 |
Plastics and plastic lining pressure vessels—Part 5: Fabrication, inspection and testing for pressure vessels with plastic lining 塑料及其衬里制压力容器 第5部分：塑料衬里制压力容器的制造、检查与检验 |
China National Standards pressure |
English PDF |
| GB/T 35974.4-2018 |
Plastics and plastic lining pressure vessels—Part 4: Fabrication, inspection and testing for plastic pressure vessels 塑料及其衬里制压力容器 第4部分：塑料制压力容器的制造、检查与检验 |
China National Standards pressure |
English PDF |
| GB/T 35990-2018 |
Metal bellows expansion joints for pressure piping 压力管道用金属波纹管膨胀节 |
China National Standards pressure |
English PDF |
| GB/T 6111-2018 |
Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure 流体输送用热塑性塑料管道系统 耐内压性能的测定 |
China National Standards pressure |
English PDF |
| GB/T 36079-2018 |
Acoustics—Procedures for determination of transmission loss, flow noise and total pressure loss coefficient for arrayed element dissipative silencers—Equivalent measurement 声学 单元并排式阻性消声器传声损失、气流再生噪声和全压损失系数的测定 等效法 |
China National Standards pressure |
English PDF |
| GB/T 36086-2018 |
Nanotechnology—Determination of contact angles of nanopowders—Washburn dynamic pressure method 纳米技术 纳米粉体接触角测量 Washburn动态压力法 |
China National Standards pressure |
English PDF |
| GB/T 6881.2-2017 |
Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Engineering methods for small movable sources in reverberant fields—Comparison method for a hard-walled test room 声学 声压法测定噪声源声功率级和声能量级 混响场内小型可移动声源工程法 硬壁测试室比较法 |
China National Standards pressure |
English PDF |
| GB/T 15022.7-2017 |
Resin based reactive compounds used for electrical insulation—Part 7: Epoxy-anhydride vacuum pressure impregnation(VPI) resin 电气绝缘用树脂基活性复合物 第7部分：环氧酸酐真空压力浸渍(VPI)树脂 |
China National Standards pressure |
English PDF |
| GB/T 18442.7-2017 |
Static vacuum insulated cryogenic pressure vessels— Part 7：Rules of pressure strengthening for inner vessels 固定式真空绝热深冷压力容器 第7部分：内容器应变强化技术规定 |
China National Standards pressure |
English PDF |
| GB/T 19812.2-2017 |
Plastic equipment for water saving irrigation—Part 2: pressure compensating emitter and emitting pipe 塑料节水灌溉器材 第2部分：压力补偿式滴头及滴灌管 |
China National Standards pressure |
English PDF |
| GB/T 16805-2017 |
The pressure testing of steel pipelines for the transportation of petroleum, gas and highly volatile liquids 输送石油天然气及高挥发性液体钢质管道压力试验 |
China National Standards pressure |
English PDF |
| GB/T 34716-2017 |
Determination of the solubility of pressure-sensitive adhesives 压敏胶粘剂溶解度的测定 |
China National Standards pressure |
English PDF |
| GB/T 34651-2017 |
Full face tunnel boring machine—Earth pressure balance shield machine 全断面隧道掘进机 土压平衡盾构机 |
China National Standards pressure |
English PDF |
| GB/T 34329-2017 |
General requirements of fiber reinforced plastics pressure vessel 纤维增强塑料压力容器通用要求 |
China National Standards pressure |
English PDF |
| GB/T 9252-2017 |
Method for pressure cycling test of gas cylinders 气瓶压力循环试验方法 |
China National Standards pressure |
English PDF |
| GB/T 34540-2017 |
Specification of hydrogen production by methanol reforming and pressure swing adsorption 甲醇转化变压吸附制氢系统技术要求 |
China National Standards pressure |
English PDF |
| GB/T 34544-2017 |
Safety test methods for onboard low pressure hydrogen storage devices for small fuel cell vehicles 小型燃料电池车用低压储氢装置安全试验方法 |
China National Standards pressure |
English PDF |
| GB/T 34426.1-2017 |
Marine boilers and pressure vessels—Part 1：Performance requirements 船用锅炉及压力容器 第1部分：性能要求 |
China National Standards pressure |
English PDF |
| GB 26149-2017 |
Performance requirements and test methods of tire pressure monitoring system for passenger cars 乘用车轮胎气压监测系统的性能要求和试验方法 |
China National Standards pressure |
English PDF |
| GB/T 2979-2017 |
Size designation, dimensions, inflation pressure and load capacity for agricultural tyres 农业轮胎规格、尺寸、气压与负荷 |
China National Standards pressure |
English PDF |
| GB/T 15022.8-2017 |
Resin based reactive compounds used for electrical insulation— Part 8：Epoxy modified unsaturated polyester vacuum pressure impregnation (VPI) resin 电气绝缘用树脂基活性复合物 第8部分：环氧改性不饱和聚酯真空压力浸渍(VPI)树脂 |
China National Standards pressure |
English PDF |
| GB/T 34189-2017 |
Portland cement used for pipe pile without high pressure steam 免压蒸管桩硅酸盐水泥 |
China National Standards pressure |
English PDF |
| GB/T 20441.5-2017 |
Electroacoustics—Measurement microphones—Part 5: Methods for pressure calibration of working standard microphones by comparison 电声学 测量传声器 第5部分：工作标准传声器声压校准的比较法 |
China National Standards pressure |
English PDF |
| GB/T 34275-2017 |
pressure piping code—Long-distance pipeline 压力管道规范 长输管道 |
China National Standards pressure |
English PDF |
| GB/T 9574-2017 |
Rubber and plastics hoses and hose assemblies—Ratios of proof and burst pressure to maximum working pressure 橡胶和塑料软管及软管组合件 验证压力、爆破压力与最大工作压力的比率 |
China National Standards pressure |
English PDF |
| GB/T 34073-2017 |
Specification of pressure transmitter for internet of things 物联网压力变送器规范 |
China National Standards pressure |
English PDF |
| GB/T 34037-2017 |
Specification of differential pressure transmitter for internet of things 物联网差压变送器规范 |
China National Standards pressure |
English PDF |
| GB/T 33960-2017 |
Aluminum and aluminum alloy welding wires for pressure vessel 压力容器焊接用铝及铝合金线材 |
China National Standards pressure |
English PDF |
| GB/T 33896-2017 |
Test method for cyclic pressure of membrane housing 分离膜外壳循环压力试验方法 |
China National Standards pressure |
English PDF |
| GB/T 33928-2017 |
Reciprocating internal combustion engines—Measurement method for exhaust silencers—Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio 往复式内燃机 排气消声器测量方法 声压法排气噪声声功率级和插入损失及功率损失比 |
China National Standards pressure |
English PDF |
| GB/T 33930-2017 |
High-pressure rolling mill for mine—Restore specifications of extrusion roll 矿用高压辊磨机 挤压辊修复规范 |
China National Standards pressure |
English PDF |
| GB/Z 33902-2017 |
Measurement of fluid flow by means of pressure differential devices—Guidelines on the effect of departure from the specifications and operating conditions given in GB/T 2624 and the correction methods 使用差压装置测量流体流量 偏离GB/T2624给出的要求和工作条件的影响及其修正方法 |
China National Standards pressure |
English PDF |
| GB/T 34019-2017 |
Ultra-high pressure vessels 超高压容器 |
China National Standards pressure |
English PDF |
| GB/T 33981-2017 |
Standard practice for the measurement of sound pressure levels on high-voltage alternating current circuit-breakers 高压交流断路器声压级测量的标准规程 |
China National Standards pressure |
English PDF |
| GB/T 33922-2017 |
Wafer level test methods for MEMS piezoresistive pressure-sensitive die performances MEMS压阻式压力敏感芯片性能的圆片级试验方法 |
China National Standards pressure |
English PDF |
| GB/T 17454.2-2017 |
Safety of machinery—pressure-sensitive protective devices—Part 2: General principles for design and testing of pressure-sensitive edges pressure-sensitive bars 机械安全 压敏保护装置 第2部分∶压敏边和压敏棒的设计和试验通则 |
China National Standards pressure |
English PDF |
| GB/T 24218.16-2017 |
Textiles—Test methods for nonwovens—Part 16: Determination of resistance to penetration by water(hydrostatic pressure) 纺织品 非织造布试验方法 第16部分：抗渗水性的测定(静水压法) |
China National Standards pressure |
English PDF |
| GB/T 8243.6-2017 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 6: Static burst pressure test 内燃机全流式机油滤清器试验方法 第6部分：静压耐破度试验 |
China National Standards pressure |
English PDF |
| GB/T 17454.3-2017 |
Safety of machinery—pressure-sensitive protective devices—Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices 机械安全 压敏保护装置 第3部分：压敏缓冲器、压敏板、压敏线及类似装置的设计和试验通则 |
China National Standards pressure |
English PDF |
| GB/T 17454.1-2017 |
Safety of machinery—pressure-sensitive protective devices—Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors 机械安全 压敏保护装置 第1部分∶压敏垫和压敏地板的设计和试验通则 |
China National Standards pressure |
English PDF |
| GB/T 1859.4-2017 |
Reciprocating internal combustion engines—Measurement of sound power levels using sound pressure—Part 4:Survey method using a reference sound source 往复式内燃机 声压法声功率级的测定 第4部分：使用标准声源简易法 |
China National Standards pressure |
English PDF |
| GB/T 33488.4-2017 |
Test method of pressure equipments of thermoplastics welded for chemicals—Part 4:Ultrasonic examination 化工用塑料焊接制承压设备检验方法 第4部分：超声检测 |
China National Standards pressure |
English PDF |
| GB/T 33488.1-2017 |
Test method of pressure equipments of thermoplastics welded for chemicals—Part 1: General requirements 化工用塑料焊接制承压设备检验方法 第1部分：总则 |
China National Standards pressure |
English PDF |
| GB/T 33488.3-2017 |
Test method of pressure equipments of thermoplastics welded for chemicals—Part 3: Radiographic examination 化工用塑料焊接制承压设备检验方法 第3部分：射线检测 |
China National Standards pressure |
English PDF |
| GB/T 33488.2-2017 |
Test method of pressure equipments of thermoplastics welded for chemicals—Part 2: Visual examination 化工用塑料焊接制承压设备检验方法 第2部分：外观检测 |
China National Standards pressure |
English PDF |
| GB/T 24511-2017 |
Stainless steel and heat resisting steel plate, sheet and strip for pressure equipments 承压设备用不锈钢和耐热钢钢板和钢带 |
China National Standards pressure |
English PDF |
| GB/T 5169.21-2017 |
Fire hazard testing for electric and electronic products—Part 21: Abnormal heat—Ball pressure test method 电工电子产品着火危险试验 第21部分：非正常热 球压试验方法 |
China National Standards pressure |
English PDF |
| GB/T 24510-2017 |
Nickel alloy steel plates for low temperature pressure vessels 低温压力容器用镍合金钢板 |
China National Standards pressure |
English PDF |
| GB/T 35428-2017 |
Requirements of environmental control for hospital negative pressure isolation ward 医院负压隔离病房环境控制要求 |
China National Standards pressure |
English PDF |
| GB/T 35229-2017 |
Specifications for surface meteorological observation—Snow depth and snow pressure 地面气象观测规范 雪深与雪压 |
China National Standards pressure |
English PDF |
| GB/Z 35140-2017 |
Measurement of fluid flow by means of pressure-differential devices—Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of GB/T 2624 用差压装置测量流体流量 GB/T 2624范围之外的孔板、喷嘴和文丘里管的使用指南 |
China National Standards pressure |
English PDF |
| GB/T 29992-2017 |
Rubber sealing rings for pressure cooker 日用压力锅橡胶密封圈 |
China National Standards pressure |
English PDF |
| GB/T 3768-2017 |
Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Survey method using an enveloping measurement surface over a reflecting plane 声学 声压法测定噪声源声功率级和声能量级 采用反射面上方包络测量面的简易法 |
China National Standards pressure |
English PDF |
| GB/T 1226-2017 |
General pressure gauge 一般压力表 |
China National Standards pressure |
English PDF |
| GB/Z 35588-2017 |
Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits 用安装在圆形截面管道中的差压装置测量湿气体流量 |
China National Standards pressure |
English PDF |
| GB/T 5310-2017 |
Seamless steel tubes and pipes for high pressure boiler 高压锅炉用无缝钢管 |
China National Standards pressure |
English PDF |
| GB/T 35529-2017 |
Rubber diaphragm for city gas pressure regulators 城镇燃气调压器用橡胶膜片 |
China National Standards pressure |
English PDF |
| GB/T 5170.10-2017 |
Inspection methods for environmental testing equipments—Part 10：Combined high and low temperature/low air pressure testing equipments 环境试验设备检验方法 第10部分：高低温低气压试验设备 |
China National Standards pressure |
English PDF |
| GB/T 14365-2017 |
Acoustics—Measurements of sound pressure level emitted by stationary road vehicles 声学 机动车辆定置噪声声压级测量方法 |
China National Standards pressure |
English PDF |
| GB/T 34530.1-2017 |
Valve for cryogenic insulated cylinder—Part 1：pressure regulating valve 低温绝热气瓶用阀门 第1部分：调压阀 |
China National Standards pressure |
English PDF |
| GB/T 4797.2-2017 |
Classification of environmental conditions—Environmental conditions appearing in nature—Air pressure 环境条件分类 自然环境条件 气压 |
China National Standards pressure |
English PDF |
| GB/T 35225-2017 |
Specifications for surface meteorological observation—Atmospheric pressure 地面气象观测规范 气压 |
China National Standards pressure |
English PDF |
| GB/T 1227-2017 |
Accurate pressure gauge 精密压力表 |
China National Standards pressure |
English PDF |
| GB/T 33215-2016 |
pressure relief devices for gas cylinders 气瓶安全泄压装置 |
China National Standards pressure |
English PDF |
| GB/T 33293-2016 |
Determination of shrinkage and expansion of well cement formulations at atmospheric pressure 常压下油井水泥收缩与膨胀的测定 |
China National Standards pressure |
English PDF |
| GB/T 33291-2016 |
Measurement method of pressure-composition-temperature for reversable hydrogen asborption & desorption of hydrides 氢化物可逆吸放氢压力-组成-等温线（P-C-T）测试方法 |
China National Standards pressure |
English PDF |
| GB/T 24603-2016 |
Boosting pressure water supply equipment for rectangular tank 箱式叠压给水设备 |
China National Standards pressure |
English PDF |
| GB/T 32970-2016 |
Longitudinal submerged-arc welded steel pipe for high pressure service at high temperatures 高温高压管道用直缝埋弧焊接钢管 |
China National Standards pressure |
English PDF |
| GB/T 2977-2016 |
Size designation,dimensions,inflation pressure and load capacity for truck tyres 载重汽车轮胎规格、尺寸、气压与负荷 |
China National Standards pressure |
English PDF |
| GB/T 32491-2016 |
Test method for long-Term hydrostatic pressure of glass fiber reinforced thermosetting resin pipe and fittings 玻璃纤维增强热固性树脂管及管件长期静水压试验方法 |
China National Standards pressure |
English PDF |
| GB/T 3767-2016 |
Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Engineering methods for an essentially free field over a reflecting plane 声学 声压法测定噪声源声功率级和声能量级 反射面上方近似自由场的工程法 |
China National Standards pressure |
English PDF |
| GB/T 32524.2-2016 |
Acoustics—Determination of sound power level and directivity character of power capacitor using sound pressure—Part 2: Engineering methods for an essentially free field over a reflecting plane 声学 声压法测定电力电容器单元的声功率级和指向特性 第2部分：反射面上方近似自由场的工程法 |
China National Standards pressure |
English PDF |
| GB/T 32524.1-2016 |
Acoustics—Determination of sound power level and directivity character of power capacitor unit using sound pressure—Part 1: Precision method for hemi-anechoic rooms 声学 声压法测定电力电容器单元的声功率级和指向特性 第1部分：半消声室精密法 |
China National Standards pressure |
English PDF |
| GB/T 32523-2016 |
Acoustics—Measurement of sound pressure reflection coefficient, sound pressure transmission coefficient and absorption coefficient for underwater acoustical material sample—Travelling wave tube method 声学 水声材料样品声压反射系数、声压透射系数和吸声系数的测量 行波管法 |
China National Standards pressure |
English PDF |
| GB/T 6882-2016 |
Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Precision methods for anechoic rooms and hemi-anechoic rooms 声学 声压法测定噪声源声功率级和声能量级 消声室和半消声室精密法 |
China National Standards pressure |
English PDF |
| GB/T 8650-2015 |
Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking 管线钢和压力容器钢抗氢致开裂评定方法 |
China National Standards pressure |
English PDF |
| GB/T 9019-2015 |
Nominal diameter for pressure vessels 压力容器公称直径 |
China National Standards pressure |
English PDF |
| GB/T 8243.13-2015 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings 内燃机全流式机油滤清器试验方法 第13部分：复合材料滤清器的静压耐破度试验 |
China National Standards pressure |
English PDF |
| GB/T 4830-2015 |
pressure range and quality of air supply for the industrial process measurement and control instruments 工业自动化仪表 气源压力范围和质量 |
China National Standards pressure |
English PDF |
| GB/T 32291-2015 |
Offline inspection and evaluation of high and super-high pressure safety valves 高压超高压安全阀离线校验与评定 |
China National Standards pressure |
English PDF |
| GB/T 32270-2015 |
pressure piping code—Power piping 压力管道规范 动力管道 |
China National Standards pressure |
English PDF |
| GB/T 32255-2015 |
General martensitic stainless steel and alloy steel castings suitable for high temperature and high pressure service 高温承压马氏体不锈钢和合金钢通用铸件 |
China National Standards pressure |
English PDF |
| GB/T 32238-2015 |
General steel castings suitable for low temperature and high pressure service 低温承压通用铸钢件 |
China National Standards pressure |
English PDF |
| GB/T 1859.3-2015 |
Reciprocating internal combustion engines—Measurement of sound power level using sound pressure—Part 3: Precision methods for hemi-anechoic rooms 往复式内燃机 声压法声功率级的测定 第3部分：半消声室精密法 |
China National Standards pressure |
English PDF |
| GB/T 1859.2-2015 |
Reciprocating internal combustion engines—Measurement of sound power level using sound pressure—Part 2: Survey method 往复式内燃机 声压法声功率级的测定 第2部分：简易法 |
China National Standards pressure |
English PDF |
| GB/T 1859.1-2015 |
Reciprocating internal combustion engines—Measurement of sound power level using sound pressure—Part 1: Engineering method 往复式内燃机 声压法声功率级的测定 第1部分：工程法 |
China National Standards pressure |
English PDF |
| GB/T 15478-2015 |
Test methods of the performances for pressure transducer/sensor 压力传感器性能试验方法 |
China National Standards pressure |
English PDF |
| GB/T 31894-2015 |
Water supply equipment of low voice additive pipe pressure 静音管网叠压给水设备 |
China National Standards pressure |
English PDF |
| GB/T 3091-2015 |
Welded steel pipes for low pressure liquid delivery 低压流体输送用焊接钢管 |
China National Standards pressure |
English PDF |
| GB/T 24912-2015 |
Additive pipe pressure water supply devices for columned tank 罐式叠压给水设备 |
China National Standards pressure |
English PDF |
| GB/T 31761-2015 |
Alkaline copper quat (ACQ) preservative pressure-treated wood 铜氨（胺）季铵盐（ACQ）防腐剂加压处理木材 |
China National Standards pressure |
English PDF |
| GB/T 31760-2015 |
Chromated copper arsenate (CCA) preservative pressure-treated wood 铜铬砷（CCA）防腐剂加压处理木材 |
China National Standards pressure |
English PDF |
| GB/T 1952-2015 |
Marine low pressure bronze male threaded check valves 船用低压外螺纹青铜止回阀 |
China National Standards pressure |
English PDF |
| GB/T 25151.6-2014 |
Fabrication and inspection method for high pressure urea equipment―Part 6: Helium leakage test method for urea high pressure equipment 尿素高压设备制造检验方法 第6部分：尿素高压设备氦渗漏试验方法 |
China National Standards pressure |
English PDF |
| GB/T 2982-2014 |
Designation,dimensions,inflation pressure and load capacity of pneumatic tyres for industrial vehicles 工业车辆充气轮胎规格、尺寸、气压与负荷 |
China National Standards pressure |
English PDF |
| GB/T 2978-2014 |
Size designation,dimensions,inflation pressure and load capacity for passenger car tyres 轿车轮胎规格、尺寸、气压与负荷 |
China National Standards pressure |
English PDF |
| GB/T 7994.1-2014 |
Test method of glass-lined equipments—Part 1: Hydraulic pressure test 搪玻璃设备试验方法 第1部分：水压试验 |
China National Standards pressure |
English PDF |
| GB/T 31183-2014 |
Technical requirements of manufacturing consulting service for high pressure hydrogen equipment of oil-refinery 炼油临氢高压设备制造监理技术要求 |
China National Standards pressure |
English PDF |
| GB/T 30965-2014 |
Earth-moving machinery―Determination of average ground contact pressure for crawler machines 土方机械 履带式机器平均接地比压的确定 |
China National Standards pressure |
English PDF |
| GB/T 30775-2014 |
pressure sensitive adhesive tapes of PE protective film 聚乙烯（PE）保护膜压敏胶粘带 |
China National Standards pressure |
English PDF |
| GB 713-2014 |
Steel plates for boilers and pressure vessels 锅炉和压力容器用钢板 |
China National Standards pressure |
English PDF |
| GB 3531-2014 |
Steel plates for low temperature pressure vessels 低温压力容器用钢板 |
China National Standards pressure |
English PDF |
| GB/T 8892-2014 |
Copper alloy tube for pressure gauge 压力表用铜合金管 |
China National Standards pressure |
English PDF |
| GB/T 30583-2014 |
Specification for post weld heat treatment of pressure equipment 承压设备焊后热处理规程 |
China National Standards pressure |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
