Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 30581-2014 |
The risk management method of power plant boiler pressure systems 电站锅炉承压系统风险管理方法 |
China National Standards pressure |
 English PDF |
| GB/T 30580-2014 |
The technical guide for the life assessment of main pressure parts of power plant boiler 电站锅炉主要承压部件寿命评估技术导则 |
China National Standards pressure |
English PDF |
| GB/T 30579-2014 |
Damage modes identification for pressure equipments 承压设备损伤模式识别 |
China National Standards pressure |
English PDF |
| GB/T 30578-2014 |
Risk-Based inspection and evaluation for atmospheric pressure storage tanks 常压储罐基于风险的检验及评价 |
China National Standards pressure |
English PDF |
| GB/T 26610.5-2014 |
Guideline for implementation of risk-based inspection of pressure equipment system―Part 5: Quantitative analysis approach of failure consequence 承压设备系统基于风险的检验实施导则 第5部分：失效后果定量分析方法 |
China National Standards pressure |
English PDF |
| GB/T 26610.4-2014 |
Guideline for implementation of risk-based inspection of pressure equipment system―Part 4：Quantitative analysis approach of failure likelihood 承压设备系统基于风险的检验实施导则 第4部分：失效可能性定量分析方法 |
China National Standards pressure |
English PDF |
| GB/T 26610.3-2014 |
Guideline for implementation of risk-based inspection of pressure equipment system―Part 3: Qualitative approach to risk 承压设备系统基于风险的检验实施导则 第3部分：风险的定性分析方法 |
China National Standards pressure |
English PDF |
| GB/T 26610.2-2014 |
Guideline for implementation of risk-based inspection of pressure equipment system―Part 2：Risk-based inspection plan 承压设备系统基于风险的检验实施导则 第2部分：基于风险的检验策略 |
China National Standards pressure |
English PDF |
| GB 30439.2-2013 |
Safety requirements for industrial automation products—Part 2: Safety requirements for pressure （differential）transmitter 工业自动化产品安全要求 第2部分: 压力/差压变送器的安全要求 |
China National Standards pressure |
English PDF |
| GB/T 30212-2013 |
Aircraft―pressure refuelling connections 飞机 压力加油接头 |
China National Standards pressure |
English PDF |
| GB/T 30211-2013 |
Aircraft—pressure re-oiling connection 飞机 压力加滑油接头 |
China National Standards pressure |
English PDF |
| GB/T 30210-2013 |
Aircraft―High pressure air charging valves 飞机 高压空气充气阀 |
China National Standards pressure |
English PDF |
| GB/T 30206.1-2013 |
Aerospace fluid systems vocabulary—Part 1: General terms and definitions relating to pressure 航空航天流体系统词汇 第1部分：压力相关的通用术语和定义 |
China National Standards pressure |
English PDF |
| GB/T 5568-2013 |
Rubber or plastics hoses and hose assemblies—Hydraulic-pressure impulse test without flexing 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验 |
China National Standards pressure |
English PDF |
| GB/T 30432-2013 |
Liquid-medium piston pressure gauge 液体活塞式压力计 |
China National Standards pressure |
English PDF |
| GB/T 30243-2013 |
Measurement of fluid flow in closed conduits—Specifications for V-cone pressure differential flow measuring device 封闭管道中流体流量的测量 V形内锥流量测量节流装置 |
China National Standards pressure |
English PDF |
| GB/T 16507.4-2013 |
Water-tube boilers―Part 4：Strength calculation of pressure parts 水管锅炉 第4部分：受压元件强度计算 |
China National Standards pressure |
English PDF |
| GB/T 7911-2013 |
High-pressure decorative laminates—Sheets made from thermosetting resins 热固性树脂浸渍纸高压装饰层积板(HPL) |
China National Standards pressure |
English PDF |
| GB/T 30040.2-2013 |
Leak detection systems―Part 2：pressure and vacuum systems 双层罐渗漏检测系统 第2部分：压力和真空系统 |
China National Standards pressure |
English PDF |
| GB/T 30048-2013 |
Test method for characteristic of pressure filtration of slime 煤泥压滤性试验方法 |
China National Standards pressure |
English PDF |
| GB 29992-2013 |
Rubber sealing rings for pressure cooker 日用压力锅橡胶密封圈 |
China National Standards pressure |
English PDF |
| GB/T 29918-2013 |
Method for measuring pressure-composition isotherms of RE-base AB5 hydrogen storage alloys 稀土系AB5型贮氢合金压力-组成等温线（PCI）的测试方法 |
China National Standards pressure |
English PDF |
| GB/T 29907-2013 |
Test method for watertightness of curtain walls under dynamic wind pressure 建筑幕墙动态风压作用下水密性能检测方法 |
China National Standards pressure |
English PDF |
| GB/T 29817-2013 |
General technology requirement for pressure/differential pressure transmitter based on HART communication 基于HART协议的压力/差压变送器通用技术条件 |
China National Standards pressure |
English PDF |
| GB/T 2423.41-2013 |
Environmental testing - Part 2: Test methods - Wind pressure 环境试验 第2部分：试验方法 风压 |
China National Standards pressure |
English PDF |
| GB 30000.6-2013 |
Rules for classification and labelling of chemicals - Part 6: Gases under pressure 化学品分类和标签规范 第6部分：加压气体 |
China National Standards pressure |
English PDF |
| GB/T 4744-2013 |
Textiles - Testing and evaluation for water resistance - Hydrostatic pressure method 纺织品 防水性能的检测和评价 静水压法 |
China National Standards pressure |
English PDF |
| GB 19572-2013 |
Low pressure carbon dioxide extinguishing system and components 低压二氧化碳灭火系统及部件 |
China National Standards pressure |
English PDF |
| GB 6479-2013 |
Seamless steel tubes for high-pressure chemical fertilizer equipments 高压化肥设备用无缝钢管 |
China National Standards pressure |
English PDF |
| GB/T 8923.4-2013 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions 、preparation grades and flash rust grades in connection with high-pressure water jetting 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第4部分：与高压水喷射处理有关的初始表面状态、处理等级和闪锈等级 |
China National Standards pressure |
English PDF |
| GB/T 29596-2013 |
Classification of pressure sensitive adhesive products 压敏胶粘制品分类 |
China National Standards pressure |
English PDF |
| GB/T 29537-2013 |
Pipe threads with 80 degree thread angle where pressure-tight joints are not made on the threads 80°非密封管螺纹 |
China National Standards pressure |
English PDF |
| GB/T 8107-2012 |
Hydraulic fluid power-Valves - Determination of pressure differential/flow characteristics 液压阀 压差-流量特性的测定 |
China National Standards pressure |
English PDF |
| GB/T 29412-2012 |
Adsorber of pressure swing adsorption for hydrogen purification 变压吸附提纯氢用吸附器 |
China National Standards pressure |
English PDF |
| GB/T 29459.2-2012 |
Small punch test methods of metallic materials for in-service pressure equipments - Part 2：Method of test for tensile properties at room temperature 在役承压设备金属材料小冲杆试验方法 第2部分：室温下拉伸性能的试验方法 |
China National Standards pressure |
English PDF |
| GB/T 29459.1-2012 |
Small punch test methods of metallic materials for in-service pressure equipments - Part 1：General requirements 在役承压设备金属材料小冲杆试验方法 第1部分：总则 |
China National Standards pressure |
English PDF |
| GB/T 29171-2012 |
Rock capillary pressure measurement 岩石毛管压力曲线的测定 |
China National Standards pressure |
English PDF |
| GB/T 19699-2012 |
Ships and marine technology - pressure/vacuum valves for cargo tanks 船舶与海上技术 液货舱压力/真空阀 |
China National Standards pressure |
English PDF |
| GB/T 18688-2012 |
Agricultural irrigation equipment - pressure losses in irrigation valves - Test method 农业灌溉设备 灌溉阀的压力损失 试验方法 |
China National Standards pressure |
English PDF |
| GB/T 18182-2012 |
Acoustic emission examination and evaluation of metallic pressure vessels 金属压力容器声发射检测及结果评价方法 |
China National Standards pressure |
English PDF |
| GB 28883-2012 |
Composite seamless steel tubes for pressure 承压用复合无缝钢管 |
China National Standards pressure |
English PDF |
| GB/T 8017-2012 |
Standard test method for vapor pressure of petroleum products (Reid Method) 石油产品蒸气压的测定 雷德法 |
China National Standards pressure |
English PDF |
| GB/T 28782.2-2012 |
Hydraulic fluid power - Measurement techniques - Part 2: Measurement of average steady-state pressure in a closed conduit 液压传动测量技术 第2部分：密闭回路中平均稳态压力的测量 |
China National Standards pressure |
English PDF |
| GB/T 15623.3-2012 |
Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves 液压传动 电调制液压控制阀 第3部分：压力控制阀试验方法 |
China National Standards pressure |
English PDF |
| GB/T 28856-2012 |
Silicon piezoresistive pressure-sensitive chip 硅压阻式压力敏感芯片 |
China National Standards pressure |
English PDF |
| GB/T 28855-2012 |
Silicon-based pressure sensors 硅基压力传感器 |
China National Standards pressure |
English PDF |
| GB/T 28854-2012 |
Silicon capacitive pressure sensor 硅电容式压力传感器 |
China National Standards pressure |
English PDF |
| GB/T 28688-2012 |
Low pressure die casting machine - Technical requirements 低压铸造机 技术条件 |
China National Standards pressure |
English PDF |
| GB/T 28474.2-2012 |
pressure/Differential-pressure transmitters for use in industrial-process measure and control systems - Part 2: Methods of evaluating the performance 工业过程测量和控制系统用压力/差压变送器 第2部分：性能评定方法 |
China National Standards pressure |
English PDF |
| GB/T 28474.1-2012 |
pressure/Differential-pressure transmitters for use in industrial-process measure and control systems - Part 1: General specification 工业过程测量和控制系统用压力/差压变送器 第1部分:通用技术条件 |
China National Standards pressure |
English PDF |
| GB/T 28266-2012 |
Non-destructive testing of pressure equipment - Qualification of radiographic film digitization systems 承压设备无损检测 射线胶片数字化系统的鉴定方法 |
China National Standards pressure |
English PDF |
| GB/T 28246-2012 |
Top gas pressure recovery turbine expander 高炉煤气能量回收透平膨胀机 |
China National Standards pressure |
English PDF |
| GB 27791-2011 |
City gas pressure regulating installation 城镇燃气调压箱 |
China National Standards pressure |
English PDF |
| GB 27790-2011 |
City gas pressure regulators 城镇燃气调压器 |
China National Standards pressure |
English PDF |
| GB/T 12716-2011 |
Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads 60°密封管螺纹 |
China National Standards pressure |
English PDF |
| GB/T 27734-2011 |
Polypropylene（PP）valves for pipes under pressure - Basic dimensions - Metric series 压力管道用聚丙烯（PP）阀门 基本尺寸 公制系列 |
China National Standards pressure |
English PDF |
| GB/T 27726-2011 |
Thermoplastics valves - pressure test methods and requirements 热塑性塑料阀门压力试验方法及要求 |
China National Standards pressure |
English PDF |
| GB 27898.3-2011 |
Fixed water supply equipment used for fire-protection - Part 3: pressure boosting and stabilizing type water supply equipment used for fire-protection 固定消防给水设备 第3部分：消防增压稳压给水设备 |
China National Standards pressure |
English PDF |
| GB 27898.2-2011 |
Fixed water supply equipment used for fire-protection - Part 2: Constant pressure automatic water supply equipment used for fire-protection 固定消防给水设备 第2部分：消防自动恒压给水设备 |
China National Standards pressure |
English PDF |
| GB 27898.1-2011 |
Fixed water supply equipment used for fire-protection - Part 1: Gas pressure fixed water supply equipment used for fire-protection 固定消防给水设备 第1部分：消防气压给水设备 |
China National Standards pressure |
English PDF |
| GB/T 25753.3-2011 |
Vacuum technology - Roots vacuum pump - Measurement of performance characteristics - Part 3: Measurement of overflow valve differential pressure 真空技术 罗茨真空泵性能测量方法 第3部分：溢流阀压差的测量 |
China National Standards pressure |
English PDF |
| GB/T 18442.6-2011 |
Static vacuum insulated cryogenic pressure vessel - Part 6：Safety device requirements 固定式真空绝热深冷压力容器 第6部分：安全防护 |
China National Standards pressure |
English PDF |
| GB/T 18442.5-2011 |
Static vacuum insulated cryogenic pressure vessel - Part 5: Inspection and test 固定式真空绝热深冷压力容器 第5部分：检验与试验 |
China National Standards pressure |
English PDF |
| GB/T 18442.4-2011 |
Static vacuum insulated cryogenic pressure vessel - Part 4: Fabrication 固定式真空绝热深冷压力容器 第4部分：制造 |
China National Standards pressure |
English PDF |
| GB/T 18442.3-2011 |
Static vacuum insulated cryogenic pressure vessel - Part 3：Design 固定式真空绝热深冷压力容器 第3部分：设计 |
China National Standards pressure |
English PDF |
| GB/T 18442.2-2011 |
Static vacuum insulated cryogenic pressure vessel - Part 2：Material 固定式真空绝热深冷压力容器 第2部分：材料 |
China National Standards pressure |
English PDF |
| GB/T 18442.1-2011 |
Static vacuum insulated cryogenic pressure vessel - Part 1: General requirements 固定式真空绝热深冷压力容器 第1部分：总则 |
China National Standards pressure |
English PDF |
| GB 150.4-2011 |
pressure vessels - Part 4: Fabrication,inspection and testing,and acceptance 压力容器 第4部分：制造、检验和验收 |
China National Standards pressure |
English PDF |
| GB 150.3-2011 |
pressure vessels - Part 3: Design 压力容器 第3部分：设计 |
China National Standards pressure |
English PDF |
| GB 150.2-2011 |
pressure vessels - Part 2: Materials 压力容器 第2部分：材料 |
China National Standards pressure |
English PDF |
| GB 150.1-2011 |
pressure vessels - Part 1: General requirements 压力容器 第1部分：通用要求 |
China National Standards pressure |
English PDF |
| GB/T 28017-2011 |
pressure mode weighing coal feeder 耐压式计量给煤机 |
China National Standards pressure |
English PDF |
| GB/T 27505-2011 |
pressure controller 压力控制器 |
China National Standards pressure |
English PDF |
| GB/T 27504-2011 |
pressure gauge error table 压力表误差表 |
China National Standards pressure |
English PDF |
| GB/T 26929-2011 |
Terminology for pressure vessels 压力容器术语 |
China National Standards pressure |
English PDF |
| GB/T 26961-2011 |
Hydraulic pressure test method of graphite lined equipment 不透性石墨设备水压试验方法 |
China National Standards pressure |
English PDF |
| GB/T 11059-2011 |
Standard test method for determination of vapor pressure of crude oil:VPCRx (expansion method) 原油蒸气压的测定 膨胀法 |
China National Standards pressure |
English PDF |
| GB/T 26886-2011 |
Grain and oil machinery - pressure screen 粮油机械 压力曲筛 |
China National Standards pressure |
English PDF |
| GB/T 26807-2011 |
Silicon piezoresistive dynamic pressure sensors 硅压阻式动态压力传感器 |
China National Standards pressure |
English PDF |
| GB/T 26801-2011 |
Fluid flow in closed conduits - Connections for pressure signal transmissions between primary and secondary elements 封闭管道中流体流量的测量 一次装置和二次装置之间压力信号传送的连接法 |
China National Standards pressure |
English PDF |
| GB 26788-2011 |
The general safety regulations of elasticity pressure gauge 弹性式压力仪表通用安全规范 |
China National Standards pressure |
English PDF |
| GB/T 26750-2011 |
Sanitary ware - pressure assistant water flushing devices 卫生洁具 便器用压力冲水装置 |
China National Standards pressure |
English PDF |
| GB/T 26729-2011 |
Agricultural irrigation equipment - PVC above-ground low-pressure pipe for surface irrigation - Specifications and test methods 农业灌溉设备 地表灌溉用聚氯乙烯（PVC）低压管 技术规范和试验方法 |
China National Standards pressure |
English PDF |
| GB 5135.17-2011 |
Automatic sprinkler system - Part 17：pressure reducing valves 自动喷水灭火系统 第17部分：减压阀 |
China National Standards pressure |
English PDF |
| GB/T 26663-2011 |
Large type hydraulic pressure safety coupling 大型液压安全联轴器 |
China National Standards pressure |
English PDF |
| GB 19189-2011 |
Quenched and tempered high strength steel plates for pressure vessels 压力容器用调质高强度钢板 |
China National Standards pressure |
English PDF |
| GB/T 26610.1-2011 |
Guideline for implementation of risk-based inspection of pressure equipment system - Part 1: Basic requirements and implementation procedure 承压设备系统基于风险的检验实施导则 第1部分：基本要求和实施程序 |
China National Standards pressure |
English PDF |
| GB/T 26556-2011 |
Generic specification for online leak sealing sealant of pressure equipment 承压设备带压密封剂技术条件 |
China National Standards pressure |
English PDF |
| GB/T 12085.21-2011 |
Optics and optical instruments - Environmental test methods - Part 21: Combined low pressure and ambient temperature or dry heat 光学和光学仪器 环境试验方法 第21部分：低压与大气温度、高温综合试验 |
China National Standards pressure |
English PDF |
| GB/T 12085.19-2011 |
Optics and optical instruments - Environmental test methods - Part 19: Combined damp heat and low internal pressure 光学和光学仪器 环境试验方法 第19部分：温度周期与正弦振动、随机振动综合试验 |
China National Standards pressure |
English PDF |
| GB/T 12085.18-2011 |
Optics and optical instruments - Environmental test methods - Part 18: Combined damp heat and low internal pressure 光学和光学仪器 环境试验方法 第18部分：湿热、低内压综合试验 |
China National Standards pressure |
English PDF |
| GB/T 26468-2011 |
Generic specification for online leaksealing clamps of pressure equipment 承压设备带压密封夹具设计规范 |
China National Standards pressure |
English PDF |
| GB/T 26467-2011 |
Generic specification for online leak sealing technology of pressure equipments 承压设备带压密封技术规范 |
China National Standards pressure |
English PDF |
| GB/T 26466-2011 |
Stationary flat steel ribbon wound vessels for storage of high pressure hydrogen 固定式高压储氢用钢带错绕式容器 |
China National Standards pressure |
English PDF |
| GB/T 26501-2011 |
General technical specification for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 通用技术条件 |
China National Standards pressure |
English PDF |
| GB/T 14041.3-2010 |
Hydraulic fluid power - Filter elements - Part 3：Verification of collapse/burst pressure rating 液压滤芯 第3部分：抗压溃（破裂）特性检验方法 |
China National Standards pressure |
English PDF |
| GB/T 26149-2010 |
TPM Sensor Module based tire pressure monitoring systems for motor vehicles 基于胎压监测模块的汽车轮胎气压监测系统 |
China National Standards pressure |
English PDF |
| GB/T 26135-2010 |
High pressure cleaning unit 高压清洗机 |
China National Standards pressure |
English PDF |
| GB 26148-2010 |
Safety specification for the use of manually operated high pressure waterjet equipment 高压水射流清洗作业安全规范 |
China National Standards pressure |
English PDF |
| GB/T 25925-2010 |
Industrial-process measurement and control instruments - Values of nominal working pressure 工业自动化仪表 公称工作压力值系列 |
China National Standards pressure |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
