China National Standards

China Die GB Standards List

  •  China "Die" GB Standards List:
    • Standard  Code Standard Title Standard Class Order
    GB/T 20914.5-2023 Dies Nitrogen gas springs Part 5: Safety regulations for nitrogen springs {译}
    冲模 氮气弹簧 第5部分：氮气弹簧安全规范    		 China National Standards
    Die
    English PDF
    GB 5009.88-2023 National food safety standards Determination of Dietary fiber in food {译}
    食品安全国家标准 食品中膳食纤维的测定    		 China National Standards
    Die
    English PDF
    GB 1886.359-2022 National Food Safety Standards Food Additives Gum Base and Its IngreDients {译}
    食品安全国家标准 食品添加剂 胶基及其配料    		 China National Standards
    Die
    English PDF
    GB 31660.2-2019 National Food Safety Standard Determination of octylphenol, nonylphenol, bisphenol A, Diethylstilbestrol, estrone, 17α-ethinyl estradiol, 17β-estradiol and estriol residues in aquatic products by gas chromatography - mass spectrometry {译}
    食品安全国家标准 水产品中辛基酚、壬基酚、双酚A、已烯雌酚、雌酮、17α-乙炔雌二醇、17β-雌二醇、雌三醇残留量的测定 气相色谱-质谱法    		 China National Standards
    Die
    English PDF
    GB 22757.1-2023 Light vehicle energy consumption labeling Part 1: Gasoline and Diesel vehicles {译}
    轻型汽车能源消耗量标识 第1部分：汽油和柴油汽车    		 China National Standards
    Die
    English PDF
    GB/T 43024.2-2023 Measurement techniques for piezoelectric, Dielectric and electrostatic oscillators Part 2: Phase jitter measurement methods {译}
    压电、介电和静电振荡器的测量技术 第2部分:相位抖动测量方法    		 China National Standards
    Die
    English PDF
    GB/T 28538-2023 Ophthalmic optics Contact lenses and contact lens care products Rabbit eye compatibility stuDies {译}
    眼科光学 接触镜和接触镜护理产品 兔眼相容性研究试验    		 China National Standards
    Die
    English PDF
    GB/T 25368-2023 Diesel engine electronically controlled common rail system high-pressure fuel supply pump assembly {译}
    柴油机电控共轨系统 高压供油泵总成    		 China National Standards
    Die
    English PDF
    GB/T 25334.2-2023 Railway locomotive boDies Part 2: Electric locomotives {译}
    铁路机车车体 第2部分:电力机车    		 China National Standards
    Die
    English PDF
    GB/T 25334.1-2023 Railway locomotive boDies Part 1: Diesel locomotives {译}
    铁路机车车体 第1部分:内燃机车    		 China National Standards
    Die
    English PDF
    GB/T 23963-2023 Industrial Diethylamine {译}
    工业用二乙胺    		 China National Standards
    Die
    English PDF
    GB/T 21269-2023 Cold chamber Die casting machine {译}
    冷室压铸机    		 China National Standards
    Die
    English PDF
    GB/T 20328-2023 R series tapered pipe thread round Die {译}
    R系列圆锥管螺纹圆板牙    		 China National Standards
    Die
    English PDF
    GB/T 4678.14-2023 Die-casting mold parts - Part 14: Stop pins {译}
    压铸模 零件 第14部分：限位钉    		 China National Standards
    Die
    English PDF
    GB/T 4678.16-2023 Die-casting mold parts - Part 16: Flat push rods {译}
    压铸模 零件 第16部分：扁推杆    		 China National Standards
    Die
    English PDF
    GB/T 13821-2023 Zinc alloy Die casting {译}
    锌合金压铸件    		 China National Standards
    Die
    English PDF
    GB/T 42620-2023 Additive Manufacturing Acrylonitrile ButaDiene Styrene (ABS) Filament for Material Extrusion {译}
    增材制造 材料挤出成形用丙烯腈-丁二烯-苯乙烯（ABS）丝材    		 China National Standards
    Die
    English PDF
    GB/T 15114-2023 Aluminum Alloy Die Casting {译}
    铝合金压铸件    		 China National Standards
    Die
    English PDF
    GB/T 25680-2023 Printing Machinery Horizontal Flat Press Die Cutting Machine {译}
    印刷机械 卧式平压模切机    		 China National Standards
    Die
    English PDF
    GB/T 2497-2023 Marine Diesel Engine Charge Air Cooler {译}
    船用柴油机增压空气冷却器    		 China National Standards
    Die
    English PDF
    GB/T 15116-2023 Die-casting copper alloy and copper alloy die-casting parts {译}
    压铸铜合金及铜合金压铸件    		 China National Standards
    Die
    English PDF
    GB/T 18899-2023 All-Dielectric Self-Supporting Optical Cable {译}
    全介质自承式光缆    		 China National Standards
    Die
    English PDF
    GB/T 42328-2023 Technical requirements for marine Diesel engine desulfurization device {译}
    船用柴油机脱硫装置技术要求    		 China National Standards
    Die
    English PDF
    GB/T 42311-2023 Nanotechnology Characterization of nanoparticles in respiratory exposure chambers for inhalation toxicity stuDies {译}
    纳米技术 吸入毒性研究中呼吸暴露舱内纳米颗粒的表征    		 China National Standards
    Die
    English PDF
    GB/T 25366-2022 Diesel engine electric control common rail system Common rail pipe assembly {译}
    柴油机电控共轨系统 共轨管总成    		 China National Standards
    Die
    English PDF
    GB/Z 27021.11-2022 Requirements for audit and certification boDies of conformity assessment management system Part 11: requirements for audit and certification ability of facility management system {译}
    合格评定 管理体系审核认证机构要求 第11部分：设施管理管理体系审核及认证能力要求    		 China National Standards
    Die
    English PDF
    GB/T 41483-2022 General technical requirements of liquid hazardous chemical safety inspection instrument based on Dielectric constant technology {译}
    基于介电常数技术的液态危险化学品安全检查仪通用技术要求    		 China National Standards
    Die
    English PDF
    GB/T 27021.8-2022 Requirements for audit and certification boDies of conformity assessment management system Part 8: requirements for audit and certification ability of urban and community sustainable development management system {译}
    合格评定 管理体系审核认证机构要求 第8部分：城市和社区可持续发展管理体系审核与认证能力要求    		 China National Standards
    Die
    English PDF
    GB/T 25747-2022 Magnesium alloy Die castings
    镁合金压铸件    		 China National Standards
    Die
    English PDF
    GB/T 25716-2022 Cold chamber Die casting machines for magnesium alloys
    镁合金冷室压铸机    		 China National Standards
    Die
    English PDF
    GB/T 17737.8-2022 Coaxial communication cables—Part 8: Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) Dielectric
    同轴通信电缆 第8部分：聚四氟乙烯绝缘半柔电缆分规范    		 China National Standards
    Die
    English PDF
    GB/T 17737.801-2022 Coaxial communication cables—Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroethylene (PTFE) Dielectric
    同轴通信电缆 第8-1部分：聚四氟乙烯绝缘半柔电缆空白详细规范    		 China National Standards
    Die
    English PDF
    GB/T 41326-2022 HexafluorobutaDiene {译}
    六氟丁二烯    		 China National Standards
    Die
    English PDF
    GB/T 42168.1-2022 Condoms—Guidelines for clinical research—Part 1: Self-reported clinical functional stuDies of male condoms {译}
    避孕套 临床研究指南 第1部分：男用避孕套基于自我报告的临床功能研究    		 China National Standards
    Die
    English PDF
    GB/T 25260.1-2022 Synthetic Latex Part 1: Carboxylated styrene-butaDiene latex (XSBRL) {译}
    合成胶乳 第1部分：羧基丁苯胶乳(XSBRL)    		 China National Standards
    Die
    English PDF
    GB/T 41938-2022 Rubber compounding agent - Precipitated hydrated silica - Evaluation method in mixtures of solution-polymerized styrene-butaDiene rubber (S-SBR) and butadiene rubber (BR) {译}
    橡胶配合剂 沉淀水合二氧化硅 在溶聚丁苯橡胶(S-SBR)和丁二烯橡胶(BR)混合物中的评价方法    		 China National Standards
    Die
    English PDF
    GB/T 42083-2022 Heat Treatment of 4Cr5MoSiV1 Hot Work Die Steel {译}
    4Cr5MoSiV1热作模具钢件的热处理    		 China National Standards
    Die
    English PDF
    GB/T 42261-2022 Metal and other inorganic coatings - thermal cycle test method for thermal barrier coatings under temperature graDient {译}
    金属及其他无机覆盖层 温度梯度下热障涂层热循环试验方法    		 China National Standards
    Die
    English PDF
    GB/T 42268-2022 Ethylene-propylene-Diene rubber (EPDM) evaluation method {译}
    乙烯-丙烯-二烯烃橡胶(EPDM) 评价方法    		 China National Standards
    Die
    English PDF
    GB/T 42125.10-2022 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 10: Particular requirements for insulation resistance measurement and Dielectric strength test equipment {译}
    测量、控制和实验室用电气设备的安全要求 第10部分：绝缘电阻测量和介电强度试验设备的特殊要求    		 China National Standards
    Die
    English PDF
    GB/T 41716-2022 Determination of main active ingreDients in lacquer tree by high performance liquid chromatography {译}
    漆树中主要有效成分含量的测定 高效液相色谱法    		 China National Standards
    Die
    English PDF
    GB/T 5264-2022 Diesel engine fuel injection pump plunger couple technical specification {译}
    柴油机喷油泵柱塞偶件 技术条件    		 China National Standards
    Die
    English PDF
    GB/T 40417-2021 Electronic specialty gas—1,3-HexafluorobutaDiene
    电子特气 六氟丁二烯    		 China National Standards
    Die
    English PDF
    GB/T 26495-2021 Magneium alloy Die casting for steering wheel armature
    镁合金压铸转向盘骨架坯料    		 China National Standards
    Die
    English PDF
    GB/T 26089-2021 Guidelines for instruction of marine Diesel engines
    船用柴油发动机手册编写要求    		 China National Standards
    Die
    English PDF
    GB/T 13291-2021 ButaDiene for industrial use
    工业用丁二烯    		 China National Standards
    Die
    English PDF
    GB/T 6110-2021 Drawing Dies—Carbide alloy drawing dies—Structural types and dimensions
    拉制模　硬质合金拉制模　结构型式和尺寸    		 China National Standards
    Die
    English PDF
    GB/T 6017-2021 Determination of purity and hydrocarbon impurities of butaDiene for industrial use—Gas chromatographic method
    工业用丁二烯纯度及烃类杂质的测定 气相色谱法    		 China National Standards
    Die
    English PDF
    GB/T 6015-2021 Determination of trace dimer and residual extraction agent of butaDiene for industrial use—Gas chromatographic method
    工业用丁二烯中微量二聚物和残留抽提剂的测定 气相色谱法    		 China National Standards
    Die
    English PDF
    GB/T 4678.15-2021 Die casting dies—Components—Part 15: Spacer blocks
    压铸模 零件 第15部分：垫块    		 China National Standards
    Die
    English PDF
    GB/T 40265-2021 General rules for determination of enzyme immunoassay antiboDies
    酶免疫检测抗体检测通则    		 China National Standards
    Die
    English PDF
    GB/T 31838.7-2021 Solid insulating materials - Dielecteric and resistive properties - Part 7: Resistive properties(DC method) - Measurement of volume resistance and volume resistivity at elevated temperatures
    固体绝缘材料 介电和电阻特性 第7部分：电阻特性(DC方法) 高温下测量体积电阻和体积电阻率    		 China National Standards
    Die
    English PDF
    GB/T 31838.6-2021 Solid insulating materials—Dielectric and resistive properties—Part 6:Dielectric properties(AC method)—Relative permittivity and dielectric dissipation factor(frequencies 0.1Hz～10 MHz)
    固体绝缘材料 介电和电阻特性 第6部分：介电特性（AC方法） 相对介电常数和介质损耗因数（频率0.1Hz~10MHz）    		 China National Standards
    Die
    English PDF
    GB/T 31838.5-2021 Solid insulating materials - Dielectric and resistive properties - Part 5: Resistive properties(DC method) - Volume resistance and volume resistivity of impregnation and coating materials
    固体绝缘材料 介电和电阻特性 第5部分：电阻特性(DC方法) 浸渍和涂层材料的体积电阻和体积电阻率    		 China National Standards
    Die
    English PDF
    GB/T 27021.3-2021 Conformity assessment - Requirements for boDies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems
    合格评定 管理体系审核认证机构要求 第3部分：质量管理体系审核与认证能力要求    		 China National Standards
    Die
    English PDF
    GB/T 27021.2-2021 Conformity assessment - Requirements for boDies providing audit and certification of management systems - Part 2: Competence requirements for auditing and certification of environmental management systems
    合格评定 管理体系审核认证机构要求 第2部分：环境管理体系审核与认证能力要求    		 China National Standards
    Die
    English PDF
    GB/T 27021.9-2021 Conformity assessment-Requirements for boDies providing audit and certification of management systems-Part 9:Competence requirements for auditing and certification of anti-bribery management systems
    合格评定 管理体系审核认证机构要求 第9部分：反贿赂管理体系审核与认证能力要求    		 China National Standards
    Die
    English PDF
    GB/T 27021.10-2021 Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 10：Competence requirements for auditing and certification of occupational health and safety management systems
    合格评定 管理体系审核认证机构要求 第10部分：职业健康安全管理体系审核与认证能力要求    		 China National Standards
    Die
    English PDF
    GB/T 3093-2021 High-pressure seamless steel tubes for Diesel engine
    柴油机用高压无缝钢管    		 China National Standards
    Die
    English PDF
    GB/T 39962-2021 Die casting machine -- Energy efficiency limits and energy efficiency rating
    压铸机 能效限定值及能效等级    		 China National Standards
    Die
    English PDF
    GB/T 39957-2021 High pressure metal Die casting units—Technical requirements
    压铸单元 技术条件    		 China National Standards
    Die
    English PDF
    GB/T 34273-2021 Standard test method for calculated cetane index of coal liquefaction Diesel—Four variable equetion
    煤液化柴油十六烷指数计算法 四变量公式法    		 China National Standards
    Die
    English PDF
    GB/T 25717-2021 Hot chamber Die casting machines for magnesium alloys
    镁合金热室压铸机    		 China National Standards
    Die
    English PDF
    GB/T 41213-2021 Integrated circuit full automatic Die bonder
    集成电路用全自动装片机    		 China National Standards
    Die
    English PDF
    GB/T 40896-2021 Determination of Diethylene glycol monoethyl ether in cosmetics—Gas chromatography mass spectrometry
    化妆品中二乙二醇单乙醚的测定 气相色谱-质谱法    		 China National Standards
    Die
    English PDF
    GB/T 40006.5-2021 Plastics—Recycled plastics—Part 5：Acrylonitrile-butaDiene-styrene (ABS) materials
    塑料 再生塑料 第5部分：丙烯腈-丁二烯-苯乙烯（ABS）材料    		 China National Standards
    Die
    English PDF
    GB/T 26548.12-2021 Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 12：Die grinders
    手持便携式动力工具 振动试验方法 第12部分：模具砂轮机    		 China National Standards
    Die
    English PDF
    GB/T 40809-2021 Casting aluminum alloys—Process specification for semisolid rheo-Diecasting forming
    铸造铝合金 半固态流变压铸成形工艺规范    		 China National Standards
    Die
    English PDF
    GB/T 40722.2-2021 Styrene-butaDiene rubber(SBR) -- Determination of the microstructure of solution-polymerized SBR -- Part 2: FTIR with ATR method
    苯乙烯-丁二烯橡胶（SBR）? 溶液聚合SBR微观结构的测定? 第2部分：红外光谱ATR 法    		 China National Standards
    Die
    English PDF
    GB/T 386-2021 Standard test method for cetane number of Diesel fuel oil
    柴油十六烷值测定法    		 China National Standards
    Die
    English PDF
    GB/T 40848-2021 (Feed ingreDients: Corn flakes)
    饲料原料 压片玉米    		 China National Standards
    Die
    English PDF
    GB/T 26036-2020 Aluminum alloy Die forgings for automobile wheels
    汽车轮毂用铝合金模锻件    		 China National Standards
    Die
    English PDF
    GB/T 38750.1-2020 Reciprocating internal combustion engine energy efficiency evaluating specifications—Part 1:Diesel engines
    往复式内燃机能效评定规范 第1部分：柴油机    		 China National Standards
    Die
    English PDF
    GB/T 28239-2020 Limits and measurement methods for non-road Diesel engine specific fuel consumption
    非道路用柴油机燃料消耗率限值及试验方法    		 China National Standards
    Die
    English PDF
    GB/T 25067-2020 Information technology—Security techniques—Requirements for boDies providing audit and certification of information security management systems
    信息技术 安全技术 信息安全管理体系审核和认证机构要求    		 China National Standards
    Die
    English PDF
    GB/T 5770-2020 Jerk fuel injection pump for Diesel engine—Specifications
    柴油机柱塞式喷油泵总成 技术条件    		 China National Standards
    Die
    English PDF
    GB/T 27021.6-2020 Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 6：Competence requirements for auditing and certification of business continuity management systems
    合格评定 管理体系审核认证机构要求 第6部分：业务连续性管理体系审核认证能力要求    		 China National Standards
    Die
    English PDF
    GB/T 38701-2020 Security management systems for the supply chain—Requirements for boDies providing audit and certification of supply chain security management systems
    供应链安全管理体系 对供应链安全管理体系审核认证机构的要求    		 China National Standards
    Die
    English PDF
    GB/T 38570-2020 Determination for ingreDients of genetically modified plants—Target sequencing methods
    植物转基因成分测定 目标序列测序法    		 China National Standards
    Die
    English PDF
    GB/T 39661-2020 Swap boDies for road transport—Technical requirements and test methods
    道路运输用交换箱 技术要求与试验方法    		 China National Standards
    Die
    English PDF
    GB/T 39710-2020 Polycarbonate / acrylonitrile-butaDiene-styrene (PC / ABS) material for charging spot housing of electric vehicle
    电动汽车充电桩壳体用聚碳酸酯/丙烯腈-丁二烯-苯乙烯（PC/ABS）专用料    		 China National Standards
    Die
    English PDF
    GB/T 39694-2020 Hydrogenated acrylonitrile-butaDiene rubber(HNBR)—General specification and evaluation procedure
    氢化丙烯腈-丁二烯橡胶（HNBR） 通用规范和评价方法    		 China National Standards
    Die
    English PDF
    GB/T 27422-2019 Conformity assessment—Requirements for boDies providing audit and certification of business continuity management systems
    合格评定 业务连续性管理体系审核和认证机构要求    		 China National Standards
    Die
    English PDF
    GB/T 27021.7-2019 Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 7: Competence requirements for auditing and certification of road traffic safety management systems
    合格评定 管理体系审核认证机构要求 第7部分：道路交通安全管理体系审核认证能力要求    		 China National Standards
    Die
    English PDF
    GB/T 27011-2019 Conformity assessment—Requirements for accreditation boDies accrediting conformity assessment bodies
    合格评定 认可机构要求    		 China National Standards
    Die
    English PDF
    GB/T 27422-2019 Conformity assessment—Requirements for boDies providing audit and certification of business continuity management systems
    合格评定 业务连续性管理体系审核和认证机构要求    		 China National Standards
    Die
    English PDF
    GB/T 27021.7-2019 Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 7: Competence requirements for auditing and certification of road traffic safety management systems
    合格评定 管理体系审核认证机构要求 第7部分：道路交通安全管理体系审核认证能力要求    		 China National Standards
    Die
    English PDF
    GB/T 37775-2019 Heavy steel open Die forgings—General technical specification
    大型钢质自由锻件 通用技术规范    		 China National Standards
    Die
    English PDF
    GB/T 37569-2019 Copper alloy rod for Die forgings (hot-pressed)
    热模锻用铜合金棒    		 China National Standards
    Die
    English PDF
    GB/T 37557-2019 Diethylenetriamine
    二乙烯三胺    		 China National Standards
    Die
    English PDF
    GB/T 37427-2019 Plastics—Acrylonitrile-butaDiene-styrene(ABS) compound for automobile
    塑料 汽车用丙烯腈-丁二烯-苯乙烯(ABS)专用料    		 China National Standards
    Die
    English PDF
    GB/T 37388-2019 Solution-polymerized styrene butaDiene rubber（SSBR）
    溶液聚合型苯乙烯-丁二烯橡胶（SSBR）    		 China National Standards
    Die
    English PDF
    GB/T 8655-2019 Styrene-butaDiene rubber (SBR)1500，1502
    苯乙烯-丁二烯橡胶（SBR）1500、1502    		 China National Standards
    Die
    English PDF
    GB/T 31838.4-2019 Solid insulating materials—Dielectric and resistive properties—Part 4: Resistive properties (DC methods)—Insulation resistance
    固体绝缘材料 介电和电阻特性 第4部分：电阻特性(DC方法) 绝缘电阻    		 China National Standards
    Die
    English PDF
    GB/T 31838.3-2019 Solid insulating materials—Dielectric and resistive properties—Part 3: Resistive properties (DC methods)—Surface resistance and surface resistivity
    固体绝缘材料 介电和电阻特性 第3部分：电阻特性(DC方法) 表面电阻和表面电阻率    		 China National Standards
    Die
    English PDF
    GB/T 31838.2-2019 Solid insulating materials—Dielectric and resistive properties—Part 2: Resistive properties (DC methods)—Volume resistance and volume resistivity
    固体绝缘材料 介电和电阻特性 第2部分：电阻特性(DC方法) 体积电阻和体积电阻率    		 China National Standards
    Die
    English PDF
    GB/T 3316-2019 Method of defining the power for Diesel locomotives
    内燃机车功率确定方法    		 China National Standards
    Die
    English PDF
    GB/T 37492-2019 Inspection of grain and oils—Determination of soluble Dietary fibre in cereals and cereals products—Enzyme gravimetric method
    粮油检验 谷物及其制品水溶性膳食纤维的测定 酶重量法    		 China National Standards
    Die
    English PDF
    GB/T 37371-2019 Die casting units—Terminology
    压铸单元 术语    		 China National Standards
    Die
    English PDF
    GB/T 37365-2019 Die casting unit—Performance testing method
    压铸单元 性能检测方法    		 China National Standards
    Die
    English PDF
    GB/T 37057-2019 Multi-way precision Die forgings—Quality control criterion
    多向精密模锻件 质量控制规范    		 China National Standards
    Die
    English PDF
    GB/T 27021.5-2018 Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 5: Competence requirements for auditing and certification of asset management systems
    合格评定-管理体系审核认证机构要求-第5部分：资产管理体系审核和认证能力要求    		 China National Standards
    Die
    English PDF
    GB/T 27021.4-2018 Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 4: Competence requirements for auditing and certification of event sustainability management systems
    合格评定-管理体系审核认证机构要求-第4部分：大型活动可持续性管理体系审核和认证能力要求    		 China National Standards
    Die
    English PDF
    GB/T 36896.4-2018 Light duty remotely operated vehicles—Part 4：VDieo, lighting and pan&tilt unit
    轻型有缆遥控水下机器人-第4部分：摄像、照明与云台    		 China National Standards
    Die
    English PDF
    GB/T 8659-2018 ButaDiene rubber(BR)9000
    丁二烯橡胶（BR）9000    		 China National Standards
    Die
    English PDF
    GB 3847-2018 Limits and measurement methods for emissions form Diesel vehicles under free acceleration and lugdown cycle
    柴油车污染物排放限值及测量方法（自由加速法及加载减速法）    		 China National Standards
    Die
    English PDF
    GB/T 8656-2018 Emulsion-and solution-polymerized styrene-butaDiene rubber(SBR)—Evaluation procedures
    乳液和溶液聚合型苯乙烯-丁二烯橡胶（SBR）-评价方法    		 China National Standards
    Die
    English PDF
    GB/T 37251-2018 CorDierite-based ceramic high temperature gas filter elements
    堇青石基高温陶瓷膜过滤元件    		 China National Standards
    Die
    English PDF
    GB/T 25260.2-2018 Synthetic rubber latex—Part 2: Carboxyl acrylonitrile-butaDiene rubber latex（XNBRL）
    合成胶乳-第2部分：羧基丁腈胶乳（XNBRL）    		 China National Standards
    Die
    English PDF
    GB/T 8660-2018 Solution polymerized butaDiene rubber（BR)—Evaluation procedures
    溶液聚合型丁二烯橡胶（BR）-评价方法    		 China National Standards
    Die
    English PDF
    GB 19147-2016/XG1-2018 Automobile Diesel fuels
    《车用柴油》国家标准第1号修改单    		 China National Standards
    Die
    English PDF
    GB 36886-2018 Limit and measurement methods for exhaust smoke form non-road mobile machinery equipped with Diesel engine
    非道路柴油移动机械排气烟度限值及测量方法    		 China National Standards
    Die
    English PDF
    GB/T 35079-2018 Multi-way precision Die forgings—Technological design principle
    多向精密模锻件 工艺编制原则    		 China National Standards
    Die
    English PDF
    GB/T 35024-2018 Detection method of mammals and poultry ingreDients—Suspended bead array
    常见畜禽动物成分检测方法 液相芯片法    		 China National Standards
    Die
    English PDF
    GB/T 21269-2018 Cold chamber Die casting machines
    冷室压铸机    		 China National Standards
    Die
    English PDF
    GB/T 3367.1-2018 Glossary of terms for Diesel locomotive—Part 1:General terms
    内燃机车词汇 第1部分：基本词汇    		 China National Standards
    Die
    English PDF
    GB/T 3367.5-2018 Glossary of terms for Diesel locomotive—Part 5: Auxiliary devices
    内燃机车词汇 第5部分：辅助装置    		 China National Standards
    Die
    English PDF
    GB/T 3367.4-2018 Glossary of terms for Diesel locomotive—Part 4:Hydraulic transmission system
    内燃机车词汇 第4部分：液力传动系统    		 China National Standards
    Die
    English PDF
    GB/T 20833.3-2018 Rotating electrical machines—Stator winding insulation of rotating electrical machines—Part 3: Dielectric dissipation factor measurement
    旋转电机 旋转电机定子绕组绝缘 第3部分：介质损耗因数测量    		 China National Standards
    Die
    English PDF
    GB/T 3367.3-2018 Glossary of terms for Diesel locomotive—Part 3:Locomotive body,bogie and brake equipment
    内燃机车词汇 第3部分：车体、转向架及制动装置    		 China National Standards
    Die
    English PDF
    GB/T 3367.2-2018 Glossary of terms for Diesel locomotive—Part 2: Diesel engine
    内燃机车词汇 第2部分： 柴油机    		 China National Standards
    Die
    English PDF
    GB/T 36721-2018 Specification for museum auDience service
    博物馆开放服务规范    		 China National Standards
    Die
    English PDF
    GB/T 5195.19-2018 Fluorspar—Determination of arsenic content—Silver Diethyldithiocarbamate spectrometric method
    萤石 砷含量的测定 二乙基二硫代氨基甲酸银光度法    		 China National Standards
    Die
    English PDF
    GB/T 4678.13-2018 Die casting dies—Components—Part 13: Ejector plate washers
    压铸模 零件 第13部分：推板垫圈    		 China National Standards
    Die
    English PDF
    GB/T 4678.12-2018 Die casting dies—Components—Part 12: Return pins
    压铸模 零件 第12部分：复位杆    		 China National Standards
    Die
    English PDF
    GB/T 4937.19-2018 Semiconductor devices—Mechanical and climatic test methods—Part 19: Die shear strength
    半导体器件 机械和气候试验方法 第19部分：芯片剪切强度    		 China National Standards
    Die
    English PDF
    GB/T 36764-2018 Rubber compounding ingreDients—Silica, precipitated, hydrated—Determination of heavy metal content by inductively coupled plasma atomic emission spectrometric method
    橡胶配合剂 沉淀水合二氧化硅 电感耦合等离子体原子发射光谱仪测定重金属含量    		 China National Standards
    Die
    English PDF
    GB/T 36885-2018 Measure method for SOx emission of marine Diesel engine
    船用柴油机硫氧化物排放测量方法    		 China National Standards
    Die
    English PDF
    GB/T 36658-2018 Technical specification of marine Diesel-natural gas dual fuel engine
    船用柴油天然气双燃料发动机技术条件    		 China National Standards
    Die
    English PDF
    GB/T 36662-2018 Selective catalytic reduction exhaust treatment system of marine Diesel engine
    船用柴油机SCR排气后处理系统    		 China National Standards
    Die
    English PDF
    GB 17691-2018 Limits and measurement methods for emissions from Diesel fuelled heavy-duty vehicles（China VI）
    重型柴油车污染物排放限值及测量方法（中国第六阶段）    		 China National Standards
    Die
    English PDF
    GB/T 9911-2018 Measurement of airborne noise emitted by marine Diesel engine
    船用柴油机辐射的空气噪声测量方法    		 China National Standards
    Die
    English PDF
    GB/T 35893-2018 Determination of aluminium zirconium chloride hydroxide complexes, aluminium zirconium chloride hydroxide glycine complexes and aluminum chlorohydrate as antiperspirant active ingreDients in cosmetics
    化妆品中抑汗活性成分氯化羟锆铝配合物、氯化羟锆铝甘氨酸配合物和氯化羟铝的测定    		 China National Standards
    Die
    English PDF
    GB/T 35915-2018 Cosmetic ingreDients—Extract of pearl
    化妆品用原料 珍珠提取物    		 China National Standards
    Die
    English PDF
    GB/T 35956-2018 Detection and determination of N-nitrosoDiethanolamine (NDELA) in cosmetics—HPLC-MS-MS
    化妆品中N-亚硝基二乙醇胺（NDELA）的测定 高效液相色谱-串联质谱法    		 China National Standards
    Die
    English PDF
    GB/T 36032-2018 Press tools for tablets—Punches and Dies
    压片冲模 冲杆与中模    		 China National Standards
    Die
    English PDF
    GB/T 36089-2018 Acrylonitrile-butaDiene rubber(NBR)
    丙烯腈-丁二烯橡胶(NBR)    		 China National Standards
    Die
    English PDF
    GB/T 35010.2-2018 Semiconductor Die products—Part 2: Exchange data formats
    半导体芯片产品 第2部分：数据交换格式    		 China National Standards
    Die
    English PDF
    GB/T 35010.6-2018 Semiconductor Die products—Part 6: Requirements for concerning thermal simulation
    半导体芯片产品 第6部分：热仿真要求    		 China National Standards
    Die
    English PDF
    GB/T 35010.8-2018 Semiconductor Die products—Part8: EXPRESS model schema for data exchange
    半导体芯片产品 第8部分：数据交换的EXPRESS格式    		 China National Standards
    Die
    English PDF
    GB/T 35010.5-2018 Semiconductor Die products—Part 5：Requirements for concerning electrical simulation
    半导体芯片产品 第5部分：电学仿真要求    		 China National Standards
    Die
    English PDF
    GB/T 35010.7-2018 Semiconductor Die products—Part 7: XML schema for data exchange
    半导体芯片产品 第7部分：数据交换的XML格式    		 China National Standards
    Die
    English PDF
    GB/T 35010.1-2018 Semiconductor Die products—Part 1：Requirements for procurement and use
    半导体芯片产品 第1部分：采购和使用要求    		 China National Standards
    Die
    English PDF
    GB/T 35010.3-2018 Semiconductor Die products—Part 3: Guide for handling, packing and storage
    半导体芯片产品 第3部分：操作、包装和贮存指南    		 China National Standards
    Die
    English PDF
    GB/T 35010.4-2018 Semiconductor Die products—Part 4: Requirements for die users and suppliers
    半导体芯片产品 第4部分：芯片使用者和供应商要求    		 China National Standards
    Die
    English PDF
    GB/T 17737.102-2018 Coaxial communication cables—Part 1-102: Electrical test methods—Test for insulation resistance of cable Dielectric
    同轴通信电缆 第1-102部分：电气试验方法 电缆介质绝缘电阻试验    		 China National Standards
    Die
    English PDF
    GB/T 17737.105-2018 Coaxial communication cables—Part 1-105: Electrical test methods—Test for withstand voltage of cable Dielectric
    同轴通信电缆 第1-105部分：电气试验方法 电缆介质的耐电压试验    		 China National Standards
    Die
    English PDF
    GB/T 34894-2017 Micro-electromechanical system technology—Measuring method for strain graDient measurements of MEMS microstructures using an optical interferometer
    微机电系统（MEMS）技术 基于光学干涉的MEMS微结构应变梯度测量方法    		 China National Standards
    Die
    English PDF
    GB/T 34819-2017 Cosmetic ingreDients—Methylisothiazolinone
    化妆品用原料 甲基异噻唑啉酮    		 China National Standards
    Die
    English PDF
    GB/T 34820-2017 Cosmetic ingreDients—Glycol distearate
    化妆品用原料 乙二醇二硬脂酸酯    		 China National Standards
    Die
    English PDF
    GB/T 34685-2017 Acrylonitrile-butaDiene rubber(NBR)—Evaluation procedure
    丙烯腈-丁二烯橡胶（NBR） 评价方法    		 China National Standards
    Die
    English PDF
    GB/T 34665-2017 Measurement method of Dielectric dissipation factor of electric machinery coil/winding insulation
    电机线圈/绕组绝缘介质损耗因数测量方法    		 China National Standards
    Die
    English PDF
    GB/T 27021.1-2017 Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 1: Requirements
    合格评定 管理体系审核认证机构要求 第1部分：要求    		 China National Standards
    Die
    English PDF
    GB/T 34698-2017 Rubber compounding ingreDients—Determination of water soluble substance of silica，precipitated，hydrated—Electrolytic conductivity method
    橡胶配合剂 沉淀水合二氧化硅水可溶物含量的测定 电导率法    		 China National Standards
    Die
    English PDF
    GB/T 34480-2017 Aluminum alloys Die forgings, hand forgings, and rolled ring forgings from spray-formed billet
    喷射成形锭坯锻制的铝合金锻件    		 China National Standards
    Die
    English PDF
    GB/T 34519-2017 Specifications of amusement device kidDie rocking category
    摇摆类游艺机技术条件    		 China National Standards
    Die
    English PDF
    GB/T 34389-2017 Stamping Dies—Sliding plates
    冲模 导滑板    		 China National Standards
    Die
    English PDF
    GB/T 4678.4-2017 Diecasting dies—Components—Part 4: Square guide pillars
    压铸模 零件 第4部分：方导柱    		 China National Standards
    Die
    English PDF
    GB/T 34580-2017 Standard test method for measurement of lubricant generated insoluble color boDies in in-service turbine oils—Membrane patch colorimetry
    运行涡轮机油中不溶有色物质的测定方法 膜片比色法    		 China National Standards
    Die
    English PDF
    GB/T 6883-2017 Cemented carbide sintering body for wire, bar or tube drawing Dies—Dimensions
    线、棒、管拉模用硬质合金烧结品 尺寸    		 China National Standards
    Die
    English PDF
    GB/T 34374-2017 Stamping Dies—L-shaped guide plates
    冲模 L形导板    		 China National Standards
    Die
    English PDF
    GB/T 4678.2-2017 Diecasting dies—Components—Part 2: Round inserts
    压铸模 零件 第2部分：圆形镶块    		 China National Standards
    Die
    English PDF
    GB/T 4679-2017 Diecasting dies—Components—Specifications
    压铸模 零件 技术条件    		 China National Standards
    Die
    English PDF
    GB/T 4678.8-2017 Diecasting dies—Components—Part 8: Ejector plate
    压铸模 零件 第8部分：推板    		 China National Standards
    Die
    English PDF
    GB/T 13747.25-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 25：Determination of niobium content—2-(5-bromo-2-pyridylazo)-5-Diethylam inophenol spectrophotometry and inductively coupled plasma atomic emission spectrometry
    锆及锆合金化学分析方法 第25部分：铌量的测定 5-Br-PADAP分光光度法和电感耦合等离子体原子发射光谱法    		 China National Standards
    Die
    English PDF
    GB/T 4678.9-2017 Diecasting dies—Components—Part 9: Ejector guide pillar
    压铸模 零件 第9部分：推板导柱    		 China National Standards
    Die
    English PDF
    GB/T 4678.5-2017 Diecasting dies—components—Part 5: Round guide pillar
    压铸模 零件 第5部分：圆导柱    		 China National Standards
    Die
    English PDF
    GB/T 8844-2017 Diecasting dies—Specifications
    压铸模 技术条件    		 China National Standards
    Die
    English PDF
    GB/T 4678.6-2017 Diecasting dies—Components—Part 6: Headed guide bush
    压铸模 零件 第6部分：带头导套    		 China National Standards
    Die
    English PDF
    GB/T 4678.1-2017 Diecasting dies—Components—Part 1: Die plates
    压铸模 零件 第1部分：模板    		 China National Standards
    Die
    English PDF
    GB/T 4678.7-2017 Diecasting dies—Components—Part 7: Straight guide bush
    压铸模 零件 第7部分：直导套    		 China National Standards
    Die
    English PDF
    GB/T 4678.10-2017 Diecasting dies—Components—Part 10: Ejector guide bush
    压铸模 零件 第10部分：推板导套    		 China National Standards
    Die
    English PDF
    GB/T 4678.3-2017 Diecasting dies—Components—Part 3: Rectangular inserts
    压铸模 零件 第3部分：矩形镶块    		 China National Standards
    Die
    English PDF
    GB/T 4678.19-2017 Diecasting dies—Components—Part 19: Locating element
    压铸模 零件 第19部分：定位元件    		 China National Standards
    Die
    English PDF
    GB/T 4678.11-2017 Diecasting dies—Components—Part 11: Ejector pin
    压铸模 零件 第11部分：推杆    		 China National Standards
    Die
    English PDF
    GB/T 34151-2017 Stamping Dies—Guide plates—U-and V-blocks
    冲模 导板 U形和V形块    		 China National Standards
    Die
    English PDF
    GB 25199-2017 B5 Diesel fuels
    B5柴油    		 China National Standards
    Die
    English PDF
    GB/T 34100-2017 Test method for determination of total sulfur in light hydrocarbons，spark ignition engine fuel ,Diesel engine fuel, and engine oil—Ultraviolet fluorescence method
    轻质烃及发动机燃料和其他油品中总硫含量的测定 紫外荧光法    		 China National Standards
    Die
    English PDF
    GB/T 8845-2017 Dies and moulds—Terminology
    模具 术语    		 China National Standards
    Die
    English PDF
    GB/T 33879-2017 Multi-way precision Die forgings—General specification
    多向精密模锻件 通用技术条件    		 China National Standards
    Die
    English PDF
    GB/T 33922-2017 Wafer level test methods for MEMS piezoresistive pressure-sensitive Die performances
    MEMS压阻式压力敏感芯片性能的圆片级试验方法    		 China National Standards
    Die
    English PDF
    GB/T 33823-2017 Aluminum alloy Die forgings for control arms of passenger vehicles
    乘用车控制臂用铝合金模锻件    		 China National Standards
    Die
    English PDF
    GB 22757.1-2017 Energy consumption label for light-duty vehicles—Part 1: For gasoline and Diesel vehicles
    轻型汽车能源消耗量标识 第1部分：汽油和柴油汽车    		 China National Standards
    Die
    English PDF
    GB/T 33801-2017 Ships and marine technology—Ship recycling management systems—Requirements for boDies providing audit and certification of ship recycling management
    船舶与海上技术 拆船管理体系 对拆船管理审核和认证机构的要求    		 China National Standards
    Die
    English PDF
    GB/T 33551-2017 Portable small-type Diesel engine-pumps direct-linking unit—Specification for performance evaluation
    轻小型柴油机-泵直联机组 性能评价规范    		 China National Standards
    Die
    English PDF
    GB/T 23507.3-2017 Criterion for electrical equipment for oil drilling rig—Part 3: The Diesel generating set for electric drilling rig
    石油钻机用电气设备规范 第3部分：电动钻机用柴油发电机组    		 China National Standards
    Die
    English PDF
    GB/T 33485-2017 Large yachts—Diesel engines for main propulsion and essential auxiliaries—Safety requirements
    大型游艇 主辅柴油机 安全要求    		 China National Standards
    Die
    English PDF
    GB/T 35771-2017 Determination of dimethyl sulfate and Diethyl sulfate in cosmetics—Gas chromatography-mass spectrometry method
    化妆品中硫酸二甲酯和硫酸二乙酯的测定 气相色谱-质谱法    		 China National Standards
    Die
    English PDF
    GB/T 35137-2017 The high-frequency reciprocating rig for Diesel fuel assessment of lubricity
    柴油润滑性评定用高频往复试验机    		 China National Standards
    Die
    English PDF
    GB/T 13822-2017 Test specimens for nonferrous Diecasting alloys
    压铸有色合金试样    		 China National Standards
    Die
    English PDF
    GB/T 21871-2017 Rubber compounding ingreDients—Symbols and abbreviated terms
    橡胶配合剂 符号及缩略语    		 China National Standards
    Die
    English PDF
    GB/T 35696-2017 Requirements for marine medium voltage AC Diesel generator set and control system
    船舶交流中压柴油发电机组及控制系统要求    		 China National Standards
    Die
    English PDF
    GB/T 35280-2017 Information security technology—Requirement and code of conduct for security testing boDies of information technology products
    信息安全技术 信息技术产品安全检测机构条件和行为准则    		 China National Standards
    Die
    English PDF
    GB/T 18952-2017 Rubber compounding ingreDients—Sulfur and methods of test
    橡胶配合剂 硫磺及试验方法    		 China National Standards
    Die
    English PDF
    GB/T 27021.2-2017 Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 2: Competence requirements for auditing and certification of environmental management systems
    合格评定 管理体系审核认证机构要求 第2部分：环境管理体系审核认证能力要求    		 China National Standards
    Die
    English PDF
    GB/T 1094.3-2017 Power transformers—Part 3:Insulation levels,Dielectric tests and external clearances in air
    电力变压器 第3部分:绝缘水平、绝缘试验和外绝缘空气间隙    		 China National Standards
    Die
    English PDF
    GB/T 35348-2017 Diesel engines—Fuel filters—Method for evaluating fuel/water separation efficiency
    柴油机 燃油滤清器 油/水分离效率的评定方法    		 China National Standards
    Die
    English PDF
    GB/T 35320-2017 Hazard and operability stuDies (HAZOP studies)—Application guide
    危险与可操作性分析（HAZOP分析） 应用指南    		 China National Standards
    Die
    English PDF
    GB/T 22003-2017 Conformity assessment—Food safety management systems—Requirements for boDies providing audit and certification of food safety management systems
    合格评定 食品安全管理体系 审核与认证机构要求    		 China National Standards
    Die
    English PDF
    GB/T 35363-2017 Diesel fuel and petrol filters for vehicle engines—The test method for filtration efficiency and contaminant retention capacity—Method of particle counting
    汽车发动机柴油滤清器和汽油滤清器 滤清效率和纳污容量的测定方法 颗粒计数法    		 China National Standards
    Die
    English PDF

    Find out:500Items   |  To Page of: First -Previous-Next -Last  | 1 2 3

    　

    +86-755-25831330        info@transcustoms.com 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2025 All Rights Reserved

    		- Since 2001 -
     Focus on China Standards & Compliance Services

    www.rjs.cn
    China Licenses
    www.transcustoms.com
    China HS code & Tariff
    www.gbstandards.org
    China National Standards