Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 20914.5-2023 |
Dies Nitrogen gas springs Part 5: Safety regulations for nitrogen springs {译} 冲模 氮气弹簧 第5部分：氮气弹簧安全规范 |
China National Standards Dies |
 English PDF |
| GB 22757.1-2023 |
Light vehicle energy consumption labeling Part 1: Gasoline and Diesel vehicles {译} 轻型汽车能源消耗量标识 第1部分：汽油和柴油汽车 |
China National Standards Dies |
English PDF |
| GB/T 28538-2023 |
Ophthalmic optics Contact lenses and contact lens care products Rabbit eye compatibility stuDies {译} 眼科光学 接触镜和接触镜护理产品 兔眼相容性研究试验 |
China National Standards Dies |
English PDF |
| GB/T 25368-2023 |
Diesel engine electronically controlled common rail system high-pressure fuel supply pump assembly {译} 柴油机电控共轨系统 高压供油泵总成 |
China National Standards Dies |
English PDF |
| GB/T 25334.2-2023 |
Railway locomotive boDies Part 2: Electric locomotives {译} 铁路机车车体 第2部分:电力机车 |
China National Standards Dies |
English PDF |
| GB/T 25334.1-2023 |
Railway locomotive boDies Part 1: Diesel locomotives {译} 铁路机车车体 第1部分:内燃机车 |
China National Standards Dies |
English PDF |
| GB/T 2497-2023 |
Marine Diesel Engine Charge Air Cooler {译} 船用柴油机增压空气冷却器 |
China National Standards Dies |
English PDF |
| GB/T 42328-2023 |
Technical requirements for marine Diesel engine desulfurization device {译} 船用柴油机脱硫装置技术要求 |
China National Standards Dies |
English PDF |
| GB/T 42311-2023 |
Nanotechnology Characterization of nanoparticles in respiratory exposure chambers for inhalation toxicity stuDies {译} 纳米技术 吸入毒性研究中呼吸暴露舱内纳米颗粒的表征 |
China National Standards Dies |
English PDF |
| GB/T 25366-2022 |
Diesel engine electric control common rail system Common rail pipe assembly {译} 柴油机电控共轨系统 共轨管总成 |
China National Standards Dies |
English PDF |
| GB/Z 27021.11-2022 |
Requirements for audit and certification boDies of conformity assessment management system Part 11: requirements for audit and certification ability of facility management system {译} 合格评定 管理体系审核认证机构要求 第11部分：设施管理管理体系审核及认证能力要求 |
China National Standards Dies |
English PDF |
| GB/T 27021.8-2022 |
Requirements for audit and certification boDies of conformity assessment management system Part 8: requirements for audit and certification ability of urban and community sustainable development management system {译} 合格评定 管理体系审核认证机构要求 第8部分：城市和社区可持续发展管理体系审核与认证能力要求 |
China National Standards Dies |
English PDF |
| GB/T 42168.1-2022 |
Condoms—Guidelines for clinical research—Part 1: Self-reported clinical functional stuDies of male condoms {译} 避孕套 临床研究指南 第1部分：男用避孕套基于自我报告的临床功能研究 |
China National Standards Dies |
English PDF |
| GB/T 5264-2022 |
Diesel engine fuel injection pump plunger couple technical specification {译} 柴油机喷油泵柱塞偶件 技术条件 |
China National Standards Dies |
English PDF |
| GB/T 26089-2021 |
Guidelines for instruction of marine Diesel engines 船用柴油发动机手册编写要求 |
China National Standards Dies |
English PDF |
| GB/T 6110-2021 |
Drawing Dies—Carbide alloy drawing dies—Structural types and dimensions 拉制模 硬质合金拉制模 结构型式和尺寸 |
China National Standards Dies |
English PDF |
| GB/T 4678.15-2021 |
Die casting Dies—Components—Part 15: Spacer blocks 压铸模 零件 第15部分：垫块 |
China National Standards Dies |
English PDF |
| GB/T 40265-2021 |
General rules for determination of enzyme immunoassay antiboDies 酶免疫检测抗体检测通则 |
China National Standards Dies |
English PDF |
| GB/T 27021.3-2021 |
Conformity assessment - Requirements for boDies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems 合格评定 管理体系审核认证机构要求 第3部分：质量管理体系审核与认证能力要求 |
China National Standards Dies |
English PDF |
| GB/T 27021.2-2021 |
Conformity assessment - Requirements for boDies providing audit and certification of management systems - Part 2: Competence requirements for auditing and certification of environmental management systems 合格评定 管理体系审核认证机构要求 第2部分：环境管理体系审核与认证能力要求 |
China National Standards Dies |
English PDF |
| GB/T 27021.9-2021 |
Conformity assessment-Requirements for boDies providing audit and certification of management systems-Part 9:Competence requirements for auditing and certification of anti-bribery management systems 合格评定 管理体系审核认证机构要求 第9部分：反贿赂管理体系审核与认证能力要求 |
China National Standards Dies |
English PDF |
| GB/T 27021.10-2021 |
Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 10：Competence requirements for auditing and certification of occupational health and safety management systems 合格评定 管理体系审核认证机构要求 第10部分：职业健康安全管理体系审核与认证能力要求 |
China National Standards Dies |
English PDF |
| GB/T 3093-2021 |
High-pressure seamless steel tubes for Diesel engine 柴油机用高压无缝钢管 |
China National Standards Dies |
English PDF |
| GB/T 34273-2021 |
Standard test method for calculated cetane index of coal liquefaction Diesel—Four variable equetion 煤液化柴油十六烷指数计算法 四变量公式法 |
China National Standards Dies |
English PDF |
| GB/T 386-2021 |
Standard test method for cetane number of Diesel fuel oil 柴油十六烷值测定法 |
China National Standards Dies |
English PDF |
| GB/T 38750.1-2020 |
Reciprocating internal combustion engine energy efficiency evaluating specifications—Part 1:Diesel engines 往复式内燃机能效评定规范 第1部分：柴油机 |
China National Standards Dies |
English PDF |
| GB/T 28239-2020 |
Limits and measurement methods for non-road Diesel engine specific fuel consumption 非道路用柴油机燃料消耗率限值及试验方法 |
China National Standards Dies |
English PDF |
| GB/T 25067-2020 |
Information technology—Security techniques—Requirements for boDies providing audit and certification of information security management systems 信息技术 安全技术 信息安全管理体系审核和认证机构要求 |
China National Standards Dies |
English PDF |
| GB/T 5770-2020 |
Jerk fuel injection pump for Diesel engine—Specifications 柴油机柱塞式喷油泵总成 技术条件 |
China National Standards Dies |
English PDF |
| GB/T 27021.6-2020 |
Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 6：Competence requirements for auditing and certification of business continuity management systems 合格评定 管理体系审核认证机构要求 第6部分：业务连续性管理体系审核认证能力要求 |
China National Standards Dies |
English PDF |
| GB/T 38701-2020 |
Security management systems for the supply chain—Requirements for boDies providing audit and certification of supply chain security management systems 供应链安全管理体系 对供应链安全管理体系审核认证机构的要求 |
China National Standards Dies |
English PDF |
| GB/T 39661-2020 |
Swap boDies for road transport—Technical requirements and test methods 道路运输用交换箱 技术要求与试验方法 |
China National Standards Dies |
English PDF |
| GB/T 27422-2019 |
Conformity assessment—Requirements for boDies providing audit and certification of business continuity management systems 合格评定 业务连续性管理体系审核和认证机构要求 |
China National Standards Dies |
English PDF |
| GB/T 27021.7-2019 |
Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 7: Competence requirements for auditing and certification of road traffic safety management systems 合格评定 管理体系审核认证机构要求 第7部分：道路交通安全管理体系审核认证能力要求 |
China National Standards Dies |
English PDF |
| GB/T 27011-2019 |
Conformity assessment—Requirements for accreditation boDies accrediting conformity assessment bodies 合格评定 认可机构要求 |
China National Standards Dies |
English PDF |
| GB/T 27422-2019 |
Conformity assessment—Requirements for boDies providing audit and certification of business continuity management systems 合格评定 业务连续性管理体系审核和认证机构要求 |
China National Standards Dies |
English PDF |
| GB/T 27021.7-2019 |
Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 7: Competence requirements for auditing and certification of road traffic safety management systems 合格评定 管理体系审核认证机构要求 第7部分：道路交通安全管理体系审核认证能力要求 |
China National Standards Dies |
English PDF |
| GB/T 3316-2019 |
Method of defining the power for Diesel locomotives 内燃机车功率确定方法 |
China National Standards Dies |
English PDF |
| GB/T 27021.5-2018 |
Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 5: Competence requirements for auditing and certification of asset management systems 合格评定-管理体系审核认证机构要求-第5部分：资产管理体系审核和认证能力要求 |
China National Standards Dies |
English PDF |
| GB/T 27021.4-2018 |
Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 4: Competence requirements for auditing and certification of event sustainability management systems 合格评定-管理体系审核认证机构要求-第4部分：大型活动可持续性管理体系审核和认证能力要求 |
China National Standards Dies |
English PDF |
| GB 3847-2018 |
Limits and measurement methods for emissions form Diesel vehicles under free acceleration and lugdown cycle 柴油车污染物排放限值及测量方法（自由加速法及加载减速法） |
China National Standards Dies |
English PDF |
| GB 19147-2016/XG1-2018 |
Automobile Diesel fuels 《车用柴油》国家标准第1号修改单 |
China National Standards Dies |
English PDF |
| GB 36886-2018 |
Limit and measurement methods for exhaust smoke form non-road mobile machinery equipped with Diesel engine 非道路柴油移动机械排气烟度限值及测量方法 |
China National Standards Dies |
English PDF |
| GB/T 3367.1-2018 |
Glossary of terms for Diesel locomotive—Part 1:General terms 内燃机车词汇 第1部分：基本词汇 |
China National Standards Dies |
English PDF |
| GB/T 3367.5-2018 |
Glossary of terms for Diesel locomotive—Part 5: Auxiliary devices 内燃机车词汇 第5部分：辅助装置 |
China National Standards Dies |
English PDF |
| GB/T 3367.4-2018 |
Glossary of terms for Diesel locomotive—Part 4:Hydraulic transmission system 内燃机车词汇 第4部分：液力传动系统 |
China National Standards Dies |
English PDF |
| GB/T 3367.3-2018 |
Glossary of terms for Diesel locomotive—Part 3:Locomotive body,bogie and brake equipment 内燃机车词汇 第3部分：车体、转向架及制动装置 |
China National Standards Dies |
English PDF |
| GB/T 3367.2-2018 |
Glossary of terms for Diesel locomotive—Part 2: Diesel engine 内燃机车词汇 第2部分： 柴油机 |
China National Standards Dies |
English PDF |
| GB/T 4678.13-2018 |
Die casting Dies—Components—Part 13: Ejector plate washers 压铸模 零件 第13部分：推板垫圈 |
China National Standards Dies |
English PDF |
| GB/T 4678.12-2018 |
Die casting Dies—Components—Part 12: Return pins 压铸模 零件 第12部分：复位杆 |
China National Standards Dies |
English PDF |
| GB/T 36885-2018 |
Measure method for SOx emission of marine Diesel engine 船用柴油机硫氧化物排放测量方法 |
China National Standards Dies |
English PDF |
| GB/T 36658-2018 |
Technical specification of marine Diesel-natural gas dual fuel engine 船用柴油天然气双燃料发动机技术条件 |
China National Standards Dies |
English PDF |
| GB/T 36662-2018 |
Selective catalytic reduction exhaust treatment system of marine Diesel engine 船用柴油机SCR排气后处理系统 |
China National Standards Dies |
English PDF |
| GB 17691-2018 |
Limits and measurement methods for emissions from Diesel fuelled heavy-duty vehicles（China VI） 重型柴油车污染物排放限值及测量方法（中国第六阶段） |
China National Standards Dies |
English PDF |
| GB/T 9911-2018 |
Measurement of airborne noise emitted by marine Diesel engine 船用柴油机辐射的空气噪声测量方法 |
China National Standards Dies |
English PDF |
| GB/T 36032-2018 |
Press tools for tablets—Punches and Dies 压片冲模 冲杆与中模 |
China National Standards Dies |
English PDF |
| GB/T 27021.1-2017 |
Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 1: Requirements 合格评定 管理体系审核认证机构要求 第1部分：要求 |
China National Standards Dies |
English PDF |
| GB/T 34389-2017 |
Stamping Dies—Sliding plates 冲模 导滑板 |
China National Standards Dies |
English PDF |
| GB/T 4678.4-2017 |
Diecasting Dies—Components—Part 4: Square guide pillars 压铸模 零件 第4部分：方导柱 |
China National Standards Dies |
English PDF |
| GB/T 34580-2017 |
Standard test method for measurement of lubricant generated insoluble color boDies in in-service turbine oils—Membrane patch colorimetry 运行涡轮机油中不溶有色物质的测定方法 膜片比色法 |
China National Standards Dies |
English PDF |
| GB/T 6883-2017 |
Cemented carbide sintering body for wire, bar or tube drawing Dies—Dimensions 线、棒、管拉模用硬质合金烧结品 尺寸 |
China National Standards Dies |
English PDF |
| GB/T 34374-2017 |
Stamping Dies—L-shaped guide plates 冲模 L形导板 |
China National Standards Dies |
English PDF |
| GB/T 4678.2-2017 |
Diecasting Dies—Components—Part 2: Round inserts 压铸模 零件 第2部分：圆形镶块 |
China National Standards Dies |
English PDF |
| GB/T 4679-2017 |
Diecasting Dies—Components—Specifications 压铸模 零件 技术条件 |
China National Standards Dies |
English PDF |
| GB/T 4678.8-2017 |
Diecasting Dies—Components—Part 8: Ejector plate 压铸模 零件 第8部分：推板 |
China National Standards Dies |
English PDF |
| GB/T 4678.9-2017 |
Diecasting Dies—Components—Part 9: Ejector guide pillar 压铸模 零件 第9部分：推板导柱 |
China National Standards Dies |
English PDF |
| GB/T 4678.5-2017 |
Diecasting Dies—components—Part 5: Round guide pillar 压铸模 零件 第5部分：圆导柱 |
China National Standards Dies |
English PDF |
| GB/T 8844-2017 |
Diecasting Dies—Specifications 压铸模 技术条件 |
China National Standards Dies |
English PDF |
| GB/T 4678.6-2017 |
Diecasting Dies—Components—Part 6: Headed guide bush 压铸模 零件 第6部分：带头导套 |
China National Standards Dies |
English PDF |
| GB/T 4678.1-2017 |
Diecasting Dies—Components—Part 1: Die plates 压铸模 零件 第1部分：模板 |
China National Standards Dies |
English PDF |
| GB/T 4678.7-2017 |
Diecasting Dies—Components—Part 7: Straight guide bush 压铸模 零件 第7部分：直导套 |
China National Standards Dies |
English PDF |
| GB/T 4678.10-2017 |
Diecasting Dies—Components—Part 10: Ejector guide bush 压铸模 零件 第10部分：推板导套 |
China National Standards Dies |
English PDF |
| GB/T 4678.3-2017 |
Diecasting Dies—Components—Part 3: Rectangular inserts 压铸模 零件 第3部分：矩形镶块 |
China National Standards Dies |
English PDF |
| GB/T 4678.19-2017 |
Diecasting Dies—Components—Part 19: Locating element 压铸模 零件 第19部分：定位元件 |
China National Standards Dies |
English PDF |
| GB/T 4678.11-2017 |
Diecasting Dies—Components—Part 11: Ejector pin 压铸模 零件 第11部分：推杆 |
China National Standards Dies |
English PDF |
| GB/T 34151-2017 |
Stamping Dies—Guide plates—U-and V-blocks 冲模 导板 U形和V形块 |
China National Standards Dies |
English PDF |
| GB 25199-2017 |
B5 Diesel fuels B5柴油 |
China National Standards Dies |
English PDF |
| GB/T 34100-2017 |
Test method for determination of total sulfur in light hydrocarbons，spark ignition engine fuel ,Diesel engine fuel, and engine oil—Ultraviolet fluorescence method 轻质烃及发动机燃料和其他油品中总硫含量的测定 紫外荧光法 |
China National Standards Dies |
English PDF |
| GB/T 8845-2017 |
Dies and moulds—Terminology 模具 术语 |
China National Standards Dies |
English PDF |
| GB 22757.1-2017 |
Energy consumption label for light-duty vehicles—Part 1: For gasoline and Diesel vehicles 轻型汽车能源消耗量标识 第1部分：汽油和柴油汽车 |
China National Standards Dies |
English PDF |
| GB/T 33801-2017 |
Ships and marine technology—Ship recycling management systems—Requirements for boDies providing audit and certification of ship recycling management 船舶与海上技术 拆船管理体系 对拆船管理审核和认证机构的要求 |
China National Standards Dies |
English PDF |
| GB/T 33551-2017 |
Portable small-type Diesel engine-pumps direct-linking unit—Specification for performance evaluation 轻小型柴油机-泵直联机组 性能评价规范 |
China National Standards Dies |
English PDF |
| GB/T 23507.3-2017 |
Criterion for electrical equipment for oil drilling rig—Part 3: The Diesel generating set for electric drilling rig 石油钻机用电气设备规范 第3部分：电动钻机用柴油发电机组 |
China National Standards Dies |
English PDF |
| GB/T 33485-2017 |
Large yachts—Diesel engines for main propulsion and essential auxiliaries—Safety requirements 大型游艇 主辅柴油机 安全要求 |
China National Standards Dies |
English PDF |
| GB/T 35137-2017 |
The high-frequency reciprocating rig for Diesel fuel assessment of lubricity 柴油润滑性评定用高频往复试验机 |
China National Standards Dies |
English PDF |
| GB/T 35696-2017 |
Requirements for marine medium voltage AC Diesel generator set and control system 船舶交流中压柴油发电机组及控制系统要求 |
China National Standards Dies |
English PDF |
| GB/T 35280-2017 |
Information security technology—Requirement and code of conduct for security testing boDies of information technology products 信息安全技术 信息技术产品安全检测机构条件和行为准则 |
China National Standards Dies |
English PDF |
| GB/T 27021.2-2017 |
Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 2: Competence requirements for auditing and certification of environmental management systems 合格评定 管理体系审核认证机构要求 第2部分：环境管理体系审核认证能力要求 |
China National Standards Dies |
English PDF |
| GB/T 35348-2017 |
Diesel engines—Fuel filters—Method for evaluating fuel/water separation efficiency 柴油机 燃油滤清器 油/水分离效率的评定方法 |
China National Standards Dies |
English PDF |
| GB/T 35320-2017 |
Hazard and operability stuDies (HAZOP studies)—Application guide 危险与可操作性分析（HAZOP分析） 应用指南 |
China National Standards Dies |
English PDF |
| GB/T 22003-2017 |
Conformity assessment—Food safety management systems—Requirements for boDies providing audit and certification of food safety management systems 合格评定 食品安全管理体系 审核与认证机构要求 |
China National Standards Dies |
English PDF |
| GB/T 35363-2017 |
Diesel fuel and petrol filters for vehicle engines—The test method for filtration efficiency and contaminant retention capacity—Method of particle counting 汽车发动机柴油滤清器和汽油滤清器 滤清效率和纳污容量的测定方法 颗粒计数法 |
China National Standards Dies |
English PDF |
| GB/T 26494-2016 |
Aluminum alloys extruded profiles used for structural material of railway vehicle carboDies 轨道交通车辆结构用铝合金挤压型材 |
China National Standards Dies |
English PDF |
| GB 19147-2016 |
Automobile Diesel fuels 车用柴油 |
China National Standards Dies |
English PDF |
| GB/T 33400-2016 |
Determination of total contamination in middle distillates, Diesel fuels andDetermination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters 中间馏分油、柴油及脂肪酸甲酯中总污染物含量测定法 |
China National Standards Dies |
English PDF |
| GB/T 33194-2016 |
Railway applications—Structural requirements of railway vehicle boDies 铁路应用 机车车辆车体结构要求 |
China National Standards Dies |
English PDF |
| GB/T 33192-2016 |
General technical specification for Diesel engine of locomotive 内燃机车用柴油机通用技术条件 |
China National Standards Dies |
English PDF |
| GB/T 33298-2016 |
Standard test method for determining cetane number of Diesel fuels—Airflow regulation 柴油十六烷值的测定 风量调节法 |
China National Standards Dies |
English PDF |
| GB/T 27021.3-2016 |
Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 3: Competence requirements for auditing and certification of quality management systems 合格评定 管理体系审核认证机构的要求 第3部分：质量管理体系审核认证的能力要求 |
China National Standards Dies |
English PDF |
| GB/T 25067-2016 |
Information technology—Security techniques—Requirements for boDies providing audit and certification of information security management systems 信息技术 安全技术 信息安全管理体系审核和认证机构要求 |
China National Standards Dies |
English PDF |
| GB/T 32859-2016 |
Detergent additive for Diesel oil 柴油清净剂 |
China National Standards Dies |
English PDF |
| GB/T 32663-2016 |
Tools for moulding—Tool specification sheet for diecasting Dies 成型模 压铸模订货技术规范 |
China National Standards Dies |
English PDF |
| GB/T 27020-2016 |
Conformity assessment—Requirements for the operation of various types of boDies performing inspection 合格评定 各类检验机构的运作要求 |
China National Standards Dies |
English PDF |
| GB/T 32084-2015 |
Diesel-powered air start unit 飞机地面柴油机气源机组 |
China National Standards Dies |
English PDF |
| GB/Z 31813-2015 |
Technical guidelines for efficacy stuDies of feed material and feed additive in livestock and poultry target animal 饲料原料和饲料添加剂畜禽靶动物有效性评价试验技术指南 |
China National Standards Dies |
English PDF |
| GB/Z 31812-2015 |
Technical guidelines for efficacy stuDies of feed material and feed additive in aquaculture target animals 饲料原料和饲料添加剂水产靶动物有效性评价试验技术指南 |
China National Standards Dies |
English PDF |
| GB/T 27065-2015 |
Conformity assessment—Requirements for boDies certifying products,processes and services 合格评定 产品、过程和服务认证机构要求 |
China National Standards Dies |
English PDF |
| GB/T 20828-2015 |
BioDiesel blend stock (BD100) for diesel engine fuels 柴油机燃料调合用生物柴油（BD100） |
China National Standards Dies |
English PDF |
| GB 252-2015 |
General Diesel fuels 普通柴油 |
China National Standards Dies |
English PDF |
| GB 25199-2015 |
BioDiesel fuel blends (B5) 生物柴油调合燃料（B5) |
China National Standards Dies |
English PDF |
| GB/T 31090-2014 |
Diesel component from direct coal liquefaction 煤炭直接液化柴油组分油 |
China National Standards Dies |
English PDF |
| GB/T 31038-2014 |
General technical condition for high voltage Diesel-generating sets 高电压柴油发电机组通用技术条件 |
China National Standards Dies |
English PDF |
| GB/T 27024-2014 |
Conformity assessment—General requirements for boDies operating certification of persons 合格评定 人员认证机构通用要求 |
China National Standards Dies |
English PDF |
| GB/T 27309-2014 |
Conformity assessment—Requirements for boDies providing certification of energy management system 合格评定 能源管理体系认证机构要求 |
China National Standards Dies |
English PDF |
| GB 20891-2014 |
Limits and measurement methods for exhaust pollutants from Diesel engines of non-road mobile machinery(CHINA Ⅲ、Ⅳ) 非道路移动机械用柴油机排气污染物排放限值及测量方法（中国第三、四阶段） |
China National Standards Dies |
English PDF |
| GB/T 30498-2014 |
Small craft—Permanently installed petrol and Diesel fuel tanks 小艇 永久性安装的汽油和柴油燃油柜 |
China National Standards Dies |
English PDF |
| GB/T 30218-2013 |
Fine blanking Dies―Specifications 精冲模 技术条件 |
China National Standards Dies |
English PDF |
| GB/T 29914-2013 |
Oxidation catalyst for Diesel vehicle exhaust purification 柴油车排气净化氧化催化剂 |
China National Standards Dies |
English PDF |
| GB/T 29720-2013 |
Coal based fischer - Tropsch synthetic Diesel component oil 煤基费托合成 柴油组分油 |
China National Standards Dies |
English PDF |
| GB/T 27201-2013 |
Credit evaluation criteria for certification boDies 认证机构信用评价准则 |
China National Standards Dies |
English PDF |
| GB/T 7404.2-2013 |
Lead-acid battery for locomotives and rolling stock - Part 2：Valve regulated lead-acid for Diesel locomotives 轨道交通车辆用铅酸蓄电池 第2部分：内燃机车用阀控式铅酸蓄电池 |
China National Standards Dies |
English PDF |
| GB 29518-2013 |
Diesel engines NOx reduction agent - Aqueous urea solution (AUS 32) 柴油发动机氮氧化物还原剂 尿素水溶液（AUS 32） |
China National Standards Dies |
English PDF |
| GB 19147-2013 |
Automobile Diesel fuels 车用柴油(V) |
China National Standards Dies |
English PDF |
| GB/T 28961-2012 |
Automotive Diesel - Two-stage fuel filters for Compression-ignition engines - Mounting and connecting dimensions 汽车柴油机 双级燃油滤清器 安装和连接尺寸 |
China National Standards Dies |
English PDF |
| GB/T 28960-2012 |
Automotive Diesel - Heads for fuel filters with horizontal flange - Mounting and connecting dimensions 汽车柴油机 具有水平安装面的旋装式燃油滤清器滤座 安装和连接尺寸 |
China National Standards Dies |
English PDF |
| GB/T 28959-2012 |
Automotive Diesel - Heads for fuel filters with vertical flange- Mounting and connecting dimensions 汽车柴油机 具有垂直安装面的燃油滤清器滤座 安装和连接尺寸 |
China National Standards Dies |
English PDF |
| GB/T 28953-2012 |
Automotive Diesel - Spin-on fuel filters for diesel engines - Mounting and connecting dimensions 汽车柴油机 旋装式燃油滤清器 安装和连接尺寸 |
China National Standards Dies |
English PDF |
| GB/T 9414.2-2012 |
Maintainability of equipment - Part 2: Maintainability requirements and stuDies during the design and development phase 维修性 第2部分：设计和开发阶段维修性要求与研究 |
China National Standards Dies |
English PDF |
| GB/T 28793-2012 |
Technical requirements of fuel saving for fishing vessel Diesel engines 渔业船舶柴油机节油技术要求 |
China National Standards Dies |
English PDF |
| GB/T 28790-2012 |
Technical requirements and measuring methods of fuel saving devices for Diesel engines of fishing vessel 渔业船舶柴油机节油装置技术条件及检测方法 |
China National Standards Dies |
English PDF |
| GB 28239-2012 |
Limits and measurement methods for non-road Diesel engine specific fuel consumption and specific oil consumption 非道路用柴油机燃料消耗率和机油消耗率限值及试验方法 |
China National Standards Dies |
English PDF |
| GB/T 27926.2-2011 |
Financial services - Universal financial industry message scheme - Part 2: Roles and responsibilities of registration boDies 金融服务 金融业通用报文方案 第2部分：注册机构的角色及职责 |
China National Standards Dies |
English PDF |
| GB/T 27308-2011 |
Conformity assessment - Requirements for boDies providing audit and certification of IT service management systems 合格评定 信息技术服务管理体系认证机构要求 |
China National Standards Dies |
English PDF |
| GB/T 10327-2011 |
Reference fuel specification for Diesel engine performance test 发动机检测用标准轻柴油技术条件 |
China National Standards Dies |
English PDF |
| GB/T 26728-2011 |
Efficient single cylinder Diesel engines - Requirements 高效单缸柴油机 技术条件 |
China National Standards Dies |
English PDF |
| GB 26509-2011 |
Garden machinery - Pedestrian-controlled lawnmower with a petrol（Diesel）engine - Safety requirements and testing methods 园林机械 以汽（柴）油机为动力的步进式草坪割草机 安全技术要求和试验方法 |
China National Standards Dies |
English PDF |
| GB/T 26494-2011 |
Aluminium alloys extruded profiles used for structural material of railway vehcle carboDies 轨道列车车辆结构用铝合金挤压型材 |
China National Standards Dies |
English PDF |
| GB/T 3221-2010 |
Code for dock and sea trials of Diesel-driven inland ships 柴油机动力内河船舶系泊和航行试验大纲 |
China National Standards Dies |
English PDF |
| GB/T 26089-2010 |
Guidelines for instruction of marine Diesel engines 船用柴油发动机使用手册编写要求 |
China National Standards Dies |
English PDF |
| GB/T 26088-2010 |
Shipbuilding - Water-cooled four cycle Diesel engines for propelling 造船 推进用水冷四冲程柴油机 |
China National Standards Dies |
English PDF |
| GB/T 7607-2010 |
Criteria for changing of Diesel engine oil 柴油机油换油指标 |
China National Standards Dies |
English PDF |
| GB/T 386-2010 |
Standard test method for cetane number of Diesel fuel oil 柴油十六烷值测定法 |
China National Standards Dies |
English PDF |
| GB/T 25689-2010 |
Earth-moving machinery - Dumper boDies - Volumetric rating 土方机械 自卸车车厢 容量标定 |
China National Standards Dies |
English PDF |
| GB/T 23718.3-2010 |
Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 3: Requirements for training boDies and the training process 机器状态监测与诊断 人员资格与人员评估的要求 第3部分：对培训机构和培训过程的要求 |
China National Standards Dies |
English PDF |
| GB/T 5772-2010 |
Injector nozzle for Diesel - Specifications 柴油机喷油嘴偶件 技术条件 |
China National Standards Dies |
English PDF |
| GB/T 5771-2010 |
Delivery valve of Diesel fuel injection pump - Specifications 柴油机喷油泵出油阀偶件 技术条件 |
China National Standards Dies |
English PDF |
| GB/T 5264-2010 |
plunger of Diesel fuel injection pump - Specifications 柴油机喷油泵柱塞偶件 技术条件 |
China National Standards Dies |
English PDF |
| GB/T 25368-2010 |
Electronic control common rail fuel injection system for Diesel engines - The high-pressure supply pump - Specifications 柴油机电控共轨喷油系统高压供油泵总成 技术条件 |
China National Standards Dies |
English PDF |
| GB/T 25367-2010 |
Electronic control common rail fuel injection system for Diesel engines - The injector - Specifications 柴油机电控共轨喷油系统喷油器总成 技术条件 |
China National Standards Dies |
English PDF |
| GB/T 25366-2010 |
Electronic control common rail fuel injection system for Diesel engines - The rail - Specifications 柴油机电控共轨喷油系统共轨管总成 技术条件 |
China National Standards Dies |
English PDF |
| GB/T 25365.1-2010 |
Electronic control common rail fuel injection system for Diesel engines - Specifications - Part 1: Machinery 柴油机电控共轨喷油系统总成 技术条件 第1部分：机械 |
China National Standards Dies |
English PDF |
| GB/T 25334.1-2010 |
Technical specification for railway locomotive car body - Part 1： Diesel locomotiver car body 铁道机车车体技术条件 第1部分：内燃机车车体 |
China National Standards Dies |
English PDF |
| GB/T 25333-2010 |
Labels of Diesel locomotive & electric locomotive 内燃、电力机车标记 |
China National Standards Dies |
English PDF |
| GB/T 25134-2010 |
Optical measurement specification of 3D geometry for forgings/stampings and the Dies 锻压制件及其模具三维几何量光学检测规范 |
China National Standards Dies |
English PDF |
| GB/T 25173-2010 |
Code of practice for computation on allowable permitted assimilative capacity of water boDies 水域纳污能力计算规程 |
China National Standards Dies |
English PDF |
| GB/T 25067-2010 |
Information technology - Security techniques - Requirements for boDies providing audit and certification of information security management systems 信息技术 安全技术 信息安全管理体系审核认证机构的要求 |
China National Standards Dies |
English PDF |
| GB/T 8029-2010 |
Calibration fluid for Diesel injection pump 柴油机喷油泵校泵油 |
China National Standards Dies |
English PDF |
| GB/T 13032-2010 |
Marine Diesel generator set 船用柴油发电机组 |
China National Standards Dies |
English PDF |
| GB/T 27040-2010 |
Conformity assessment - General requirements for peer assessment of conformity assessment boDies and accreditation bodies 合格评定 合格评定机构和认可机构同行评审的通用要求 |
China National Standards Dies |
English PDF |
| GB/T 24656-2009 |
Diesel filter of tractors - Specifications 拖拉机用柴油滤清器 技术条件 |
China National Standards Dies |
English PDF |
| GB/T 24141.2-2009 |
Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 2: Diesel fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第2部分：汽油燃料 |
China National Standards Dies |
English PDF |
| GB/T 24141.1-2009 |
Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第1部分：柴油燃料 |
China National Standards Dies |
English PDF |
| GB/T 23718.1-2009 |
Condition monitoring and diagnostics of machines - Requirements for training and certification of personnel - Part 1: Requirements for certifying boDies and the certification process 机器状态监测与诊断 人员培训与认证的要求 第1部分：对认证机构和认证过程的要求 |
China National Standards Dies |
English PDF |
| GB/T 23566.4-2009 |
Sliding guide steel-plate punch holders of stamping Dies - Part 4: Four-pillar punch holders 冲模滑动导向钢板上模座 第4部分：四导柱上模座 |
China National Standards Dies |
English PDF |
| GB/T 23566.3-2009 |
Sliding guide steel-plate punch holders of stamping Dies - Part 3: Center-pillar punch holders 冲模滑动导向钢板上模座 第3部分：中间导柱上模座 |
China National Standards Dies |
English PDF |
| GB/T 23566.2-2009 |
Sliding guide steel-plate punch holders of stamping Dies - Part 2: Diagonal-pillar punch holders 冲模滑动导向钢板上模座 第2部分：对角导柱上模座 |
China National Standards Dies |
English PDF |
| GB/T 23566.1-2009 |
Sliding guide steel-plate punch holders of stamping Dies - Part 1: Rear-pillar punch holders 冲模滑动导向钢板上模座 第1部分：后侧导柱上模座 |
China National Standards Dies |
English PDF |
| GB/T 23565.4-2009 |
Sliding guide steel-plate die sets of stamping Dies - Part 4: Four-pillar die sets 冲模滑动导向钢板模架 第4部分：四导柱模架 |
China National Standards Dies |
English PDF |
| GB/T 23565.3-2009 |
Sliding guide steel-plate die sets of stamping Dies - Part 3: Center-pillar die sets 冲模滑动导向钢板模架 第3部分：中间导柱模架 |
China National Standards Dies |
English PDF |
| GB/T 23565.2-2009 |
Sliding guide steel-plate die sets of stamping Dies - Part 2: Diagonal-pillar die sets 冲模滑动导向钢板模架 第2部分：对角导柱模架 |
China National Standards Dies |
English PDF |
| GB/T 23565.1-2009 |
Sliding guide steel-plate die sets of stamping Dies - Part 1: Rear-pillar die sets 冲模滑动导向钢板模架 第1部分：后侧导柱模架 |
China National Standards Dies |
English PDF |
| GB/T 23564.4-2009 |
Ball-bearing guide steel-plate punch holders of stamping Dies - Part 4: Four-pillar punch holders 冲模滚动导向钢板上模座 第4部分：四导柱上模座 |
China National Standards Dies |
English PDF |
| GB/T 23564.3-2009 |
Ball-bearing guide steel-plate punch holders of stamping Dies - Part 3: Center-pillar punch holders 冲模滚动导向钢板上模座 第3部分：中间导柱上模座 |
China National Standards Dies |
English PDF |
| GB/T 23564.2-2009 |
Ball-bearing guide steel-plate punch holders of stamping Dies - Part 2: Diagonal-pillar punch holders 冲模滚动导向钢板上模座 第2部分：对角导柱上模座 |
China National Standards Dies |
English PDF |
| GB/T 23564.1-2009 |
Ball-bearing guide steel-plate punch holders of stamping Dies - Part 1: Rear-pillar punch holders 冲模滚动导向钢板上模座 第1部分：后侧导柱上模座 |
China National Standards Dies |
English PDF |
| GB/T 23563.4-2009 |
Ball-bearing guide steel-plate die sets of stamping Dies - Part 4: Four-pillar die sets 冲模滚动导向钢板模架 第4部分：四导柱模架 |
China National Standards Dies |
English PDF |
| GB/T 23563.3-2009 |
Ball-bearing guide steel-plate die sets of stamping Dies - Part 3: Center-pillar die sets 冲模滚动导向钢板模架 第3部分：中间导柱模架 |
China National Standards Dies |
English PDF |
| GB/T 23563.2-2009 |
Ball-bearing guide steel-plate die sets of stamping Dies - Part 2: Diagonal-pillar die sets 冲模滚动导向钢板模架 第2部分：对角导柱模架 |
China National Standards Dies |
English PDF |
| GB/T 23563.1-2009 |
Ball-bearing guide steel-plate die sets of stamping Dies - Part 1: Rear-pillar die sets 冲模滚动导向钢板模架 第1部分：后侧导柱模架 |
China National Standards Dies |
English PDF |
| GB/T 23562.4-2009 |
Steel-plate die holders of stamping Dies - Part 4: Four-pillar die holders 冲模钢板下模座 第4部分：四导柱下模座 |
China National Standards Dies |
English PDF |
| GB/T 23562.3-2009 |
Steel-plate die holders of stamping Dies - Part 3: Center-pillar die holders 冲模钢板下模座 第3部分：中间导柱下模座 |
China National Standards Dies |
English PDF |
| GB/T 23562.2-2009 |
Steel-plate die holders of stamping Dies - Part 2: Diagonal-pillar die holders 冲模钢板下模座 第2部分：对角导柱下模座 |
China National Standards Dies |
English PDF |
| GB/T 23562.1-2009 |
Steel-plate die holders of stamping Dies - Part 1: Rear-pillar die holders 冲模钢板下模座 第1部分：后侧导柱下模座 |
China National Standards Dies |
English PDF |
| GB/T 23507.3-2009 |
Criterion for electriacl equipment for oil drilling rig - Part 3: The Diesel generating set for electric drilling rig 石油钻机用电气设备规范 第3部分：电动钻机用柴油发电机组 |
China National Standards Dies |
English PDF |
| GB/T 23430-2009 |
General technical specification for shunting Diesel locomotive for urban rail transit 城市轨道交通内燃调车机车通用技术条件 |
China National Standards Dies |
English PDF |
| GB/T 9911-2009 |
Measure method of airborne noise emitted by marine Diesel engine 船用柴油机辐射的空气噪声测量方法 |
China National Standards Dies |
English PDF |
| GB/T 14363-2009 |
Measure method of lubricating oil consumption for Diesel engines 柴油机机油消耗测定方法 |
China National Standards Dies |
English PDF |
| GB 11871-2009 |
Limits of airborne noise emitted by marine Diesel engines 船用柴油机辐射的空气噪声限值 |
China National Standards Dies |
English PDF |
| GB 8840-2009 |
Limit for exhaust smoke of marine Diesel engine 船用柴油机排气烟度限值 |
China National Standards Dies |
English PDF |
| GB/T 22003-2008 |
Food safety management systems - Requirements for boDies providing audit and certification of food safety management systems 食品安全管理体系 审核与认证机构要求 |
China National Standards Dies |
English PDF |
| GB/T 22631-2008 |
Vertical building elements - Impact resistance test - Impact boDies and general test procedures 建筑物垂直部件 抗冲击试验 冲击物及通用试验程序 |
China National Standards Dies |
English PDF |
| GB/T 7184-2008 |
Small and medium power Diesel engines - Measurement and evaluation of vibration 中小功率柴油机 振动测量及评级 |
China National Standards Dies |
English PDF |
| GB/T 22275.7-2008 |
Requirements of conduct for good laboratory practice - Part 7: The application of the GLP principles to the organisation and management of multi-site stuDies 良好实验室规范实施要求 第7部分：良好实验室规范原则在多场所研究的组织和管理中的应用 |
China National Standards Dies |
English PDF |
| GB/T 22275.5-2008 |
Requirements of conduct for good laboratory practice - Part 5: The application of the GLP principles to short term stuDies 良好实验室规范实施要求 第5部分：良好实验室规范原则在短期研究中的应用 |
China National Standards Dies |
English PDF |
| GB/T 22275.4-2008 |
Requirements of conduct for good laboratory practice - Part 4: The application of the GLP principles to field stuDies 良好实验室规范实施要求 第4部分：良好实验室规范原则在现场研究中的应用 |
China National Standards Dies |
English PDF |
| GB/T 22275.2-2008 |
Requirements of conduct for good laboratory practice - Part 2: The role and responsibilities of the study director in GLP stuDies 良好实验室规范实施要求 第2部分：良好实验室规范研究中项目负责人的任务和职责 |
China National Standards Dies |
English PDF |
| GB/T 22273-2008 |
Advisory document for good laboratory practice:The application of the principles of GLP to in vitro stuDies 良好实验室规范建议性文件 良好实验室规范原则在体外研究中的应用 |
China National Standards Dies |
English PDF |
| GB/T 5741-2008 |
Measure method for exhaust smoke of marine Diesel engine 船用柴油机排气烟度测量方法 |
China National Standards Dies |
English PDF |
| GB/T 15097-2008 |
Measure method for emission pollutant of exhaust gas of marine Diesel engine 船用柴油机排气排放污染物测量方法 |
China National Standards Dies |
English PDF |
| GB/T 2497-2008 |
Charge air coolers for marine Diesel engines 船用柴油机增压空气冷却器 |
China National Standards Dies |
English PDF |
| Find out:273Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
