Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43484-2023 |
Additive Manufacturing High TEMPerature Alloy Powders for Laser Powder Bed Melting {译} 增材制造 激光粉末床熔融用高温合金粉末 |
China National Standards EMP |
 English PDF |
| GB/Z 43521-2023 |
General guidelines for the design and analysis of ocean tEMPerature difference energy conversion power plants {译} 海洋温差能转换电站设计和分析的一般指南 |
China National Standards EMP |
English PDF |
| GB/T 7000.224-2023 |
Luminaires Part 2-24: Special requirements Limited surface tEMPerature luminaires {译} 灯具 第2-24部分：特殊要求 限制表面温度灯具 |
China National Standards EMP |
English PDF |
| GB/T 6803-2023 |
Drop weight test method for non-plastic transition tEMPerature of ferritic steels {译} 铁素体钢的无塑性转变温度落锤试验方法 |
China National Standards EMP |
English PDF |
| GB/T 5072-2023 |
Refractory materials - Normal tEMPerature compressive strength test method {译} 耐火材料 常温耐压强度试验方法 |
China National Standards EMP |
English PDF |
| GB/T 43307-2023 |
Determination of room tEMPerature tensile properties of fine ceramic fiber single filaments {译} 精细陶瓷纤维 单丝室温拉伸性能的测定 |
China National Standards EMP |
English PDF |
| GB/T 43296-2023 |
Test method for room tEMPerature bending fatigue properties of fine ceramics {译} 精细陶瓷室温弯曲疲劳性能试验方法 |
China National Standards EMP |
English PDF |
| GB/T 1965-2023 |
Porous ceramics - test method for room tEMPerature flexural strength {译} 多孔陶瓷 室温弯曲强度试验方法 |
China National Standards EMP |
English PDF |
| GB/T 1964-2023 |
Porous ceramics - Test method for compressive strength at room tEMPerature {译} 多孔陶瓷 室温压缩强度试验方法 |
China National Standards EMP |
English PDF |
| GB/T 30163-2023 |
Technical Specifications for Energy Saving of High Air TEMPerature Top-Fired Hot Air Stoves for Blast Furnaces {译} 高炉用高风温顶燃式热风炉节能技术规范 |
China National Standards EMP |
English PDF |
| GB/T 43255-2023 |
Test method for low tEMPerature cold starting performance of fuel cell electric vehicles {译} 燃料电池电动汽车低温冷起动性能试验方法 |
China National Standards EMP |
English PDF |
| GB/T 43118-2023 |
Corrosion of metals and alloys Test method for high-tEMPerature corrosion of metallic materials under the action of deposits of salt, ash or other substances {译} 金属和合金的腐蚀 金属材料在盐、灰烬或其他物质的沉积物作用下进行高温腐蚀的试验方法 |
China National Standards EMP |
English PDF |
| GB/T 43115-2023 |
Metallic materials - Sheet and strip - Room tEMPerature shear test methods {译} 金属材料 薄板和薄带 室温剪切试验方法 |
China National Standards EMP |
English PDF |
| GB/T 43092-2023 |
Electrochemical performance testing of lithium-ion battery cathode materials High tEMPerature performance testing method {译} 锂离子电池正极材料电化学性能测试 高温性能测试方法 |
China National Standards EMP |
English PDF |
| GB/T 3780.30-2023 |
Carbon black Part 30: Determination of high tEMPerature volatiles Thermogravimetric method {译} 炭黑 第30部分：高温挥发物的测定 热重法 |
China National Standards EMP |
English PDF |
| GB/T 31596.3-2023 |
Social Security Terminology Part 3: UnEMPloyment Insurance {译} 社会保险术语 第3部分: 失业保险 |
China National Standards EMP |
English PDF |
| GB/T 26945-2023 |
Container EMPty container stacker {译} 集装箱空箱堆高机 |
China National Standards EMP |
English PDF |
| GB/T 16984-2023 |
hEMP raw hemp {译} 大麻原麻 |
China National Standards EMP |
English PDF |
| GB/T 42657-2023 |
Test method for infrared refractive index tEMPerature coefficient of infrared optical glass - vertical incidence method {译} 红外光学玻璃红外折射率温度系数测试方法 垂直入射法 |
China National Standards EMP |
English PDF |
| GB/T 42653-2023 |
Glass high tEMPerature viscosity test method {译} 玻璃高温黏度试验方法 |
China National Standards EMP |
English PDF |
| GB/T 35306-2023 |
Determination of carbon and oxygen content in silicon single crystal Low-tEMPerature Fourier transform infrared spectroscopy {译} 硅单晶中碳、氧含量的测定 低温傅立叶变换红外光谱法 |
China National Standards EMP |
English PDF |
| GB/T 42667-2023 |
Test method for room tEMPerature isobiaxial bending strength of fine ceramics - double loop method {译} 精细陶瓷室温等双轴弯曲强度试验方法 双环法 |
China National Standards EMP |
English PDF |
| GB/T 42655-2023 |
Test method for high tEMPerature compression properties of continuous fiber reinforced ceramic matrix composites {译} 连续纤维增强陶瓷基复合材料高温压缩性能试验方法 |
China National Standards EMP |
English PDF |
| GB/T 42910-2023 |
Test method for high tEMPerature compression shear strength of inorganic adhesives {译} 无机胶粘剂高温压缩剪切强度试验方法 |
China National Standards EMP |
English PDF |
| GB/T 42913-2023 |
Corrosion of metals and alloys Test methods for high-tEMPerature corrosion of metallic materials embedded in salt, ash or other solids {译} 金属和合金的腐蚀 金属材料嵌入在盐、灰烬或其他固体中的高温腐蚀试验方法 |
China National Standards EMP |
English PDF |
| GB/T 42912-2023 |
Corrosion of metals and alloys Test methods for high-tEMPerature corrosion of metallic materials under static immersion in molten salts or other liquids {译} 金属和合金的腐蚀 金属材料在静态浸入熔盐或其他液体条件下的高温腐蚀试验方法 |
China National Standards EMP |
English PDF |
| GB/T 42900-2023 |
High strain rate and high tEMPerature compression test method for metallic materials {译} 金属材料 高应变速率高温压缩试验方法 |
China National Standards EMP |
English PDF |
| GB/T 713.6-2023 |
Steel plates and strips for pressure-bearing equipment Part 6: Quenched and tEMPered high-strength steels {译} 承压设备用钢板和钢带 第6部分：调质高强度钢 |
China National Standards EMP |
English PDF |
| GB/T 713.5-2023 |
Steel plates and strips for pressure equipment Part 5: High manganese steels with specified low tEMPerature properties {译} 承压设备用钢板和钢带 第5部分：规定低温性能的高锰钢 |
China National Standards EMP |
English PDF |
| GB/T 713.4-2023 |
Steel plates and strips for pressure equipment Part 4: Nickel alloy steels with specified low tEMPerature properties {译} 承压设备用钢板和钢带 第4部分：规定低温性能的镍合金钢 |
China National Standards EMP |
English PDF |
| GB/T 713.3-2023 |
Steel plates and strips for pressure equipment Part 3: Low alloy steels with specified low tEMPerature properties {译} 承压设备用钢板和钢带 第3部分：规定低温性能的低合金钢 |
China National Standards EMP |
English PDF |
| GB/T 713.2-2023 |
Steel plates and strips for pressure equipment Part 2: Non-alloy and alloy steels with specified tEMPerature properties {译} 承压设备用钢板和钢带 第2部分：规定温度性能的非合金钢和合金钢 |
China National Standards EMP |
English PDF |
| GB/T 20818.14-2023 |
Industrial process measurement and control - Data structures and elements in process equipment catalogs - Part 14: List of properties (LOP) for electronic data exchange of tEMPerature measuring equipment {译} 工业过程测量和控制 过程设备目录中的数据结构和元素 第14部分：温度测量设备电子数据交换用属性列表(LOP) |
China National Standards EMP |
English PDF |
| GB/T 17879-2023 |
Gears - chemical etching test for surface tEMPering after grinding {译} 齿轮 磨削后表面回火的化学浸蚀检验 |
China National Standards EMP |
English PDF |
| GB/T 42919.6-2023 |
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method based on tEMPerature modulation technology {译} 塑料 导热系数和热扩散系数的测定 第6部分：基于温度调制技术的比较法 |
China National Standards EMP |
English PDF |
| GB/T 42919.3-2023 |
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: TEMPerature wave analysis method {译} 塑料 导热系数和热扩散系数的测定 第3部分：温度波分析法 |
China National Standards EMP |
English PDF |
| GB/T 40261.1-2023 |
Ergonomics of the thermal environment Assessment of the thermal environment in vehicles Part 1: Principles and methods of heat stress assessment and equivalent tEMPerature determination {译} 热环境的人类工效学 交通工具内热环境评价 第1部分:热应激评估原理与方法和等效温度测定 |
China National Standards EMP |
English PDF |
| GB/T 15759-2023 |
Human body tEMPlate design and usage requirements {译} 人体模板设计和使用要求 |
China National Standards EMP |
English PDF |
| GB/T 5989-2023 |
Refractories - Test method for softening tEMPerature under load (differential heating method) {译} 耐火材料 荷重软化温度试验方法(示差升温法) |
China National Standards EMP |
English PDF |
| GB/T 18034-2023 |
Specification for platinum-rhodium fine wire for rapid tEMPerature measurement thermocouple {译} 快速测温热电偶用铂铑细偶丝规范 |
China National Standards EMP |
English PDF |
| GB/T 42567.3-2023 |
Reference conditions and procedures for testing transmitters for industrial process measurement Part 3: Specific procedures for tEMPerature transmitters {译} 工业过程测量变送器试验的参比条件和程序 第3部分：温度变送器的特定程序 |
China National Standards EMP |
English PDF |
| GB/T 42516-2023 |
Chemical analysis method of high tEMPerature shape memory alloy - determination of platinum content - thiourea complex precipitation method {译} 高温形状记忆合金化学分析方法 铂含量的测定 硫脲络合沉淀法 |
China National Standards EMP |
English PDF |
| GB/T 42603.2-2023 |
Moderate tEMPerature molding materials for investment casting - Part 2: Test methods for serviceability {译} 熔模铸造中温模料 第2部分:使用性能试验方法 |
China National Standards EMP |
English PDF |
| GB/T 42603.1-2023 |
Moderate tEMPerature molding materials for investment casting - Part 1: Test methods for physical properties {译} 熔模铸造中温模料 第1部分：物理性能试验方法 |
China National Standards EMP |
English PDF |
| GB/T 4937.23-2023 |
Semiconductor devices - Mechanical and climatic test methods - Part 23: High tEMPerature operating life {译} 半导体器件 机械和气候试验方法 第23部分：高温工作寿命 |
China National Standards EMP |
English PDF |
| GB/T 42528-2023 |
SpatiotEMPoral Big Data Technical Specifications {译} 时空大数据技术规范 |
China National Standards EMP |
English PDF |
| GB/T 4937.42-2023 |
Semiconductor devices - Mechanical and climatic test methods - Part 42: TEMPerature and humidity storage {译} 半导体器件 机械和气候试验方法 第42部分：温湿度贮存 |
China National Standards EMP |
English PDF |
| GB/T 42507-2023 |
Requirements for the construction and management of EMPloyees' credit files {译} 从业人员信用档案建设与管理要求 |
China National Standards EMP |
English PDF |
| GB/T 42368-2023 |
Method for Determination of Explosive Limits of Combustible Gas (Steam) under High TEMPerature and High Pressure Conditions {译} 高温高压条件下可燃气体（蒸气）爆炸极限测定方法 |
China National Standards EMP |
English PDF |
| GB/T 25861-2023 |
Vapor compression cycle water source high tEMPerature heat pump unit {译} 蒸气压缩循环水源高温热泵机组 |
China National Standards EMP |
English PDF |
| GB/T 10592-2023 |
High and low tEMPerature test chamber technical conditions {译} 高低温试验箱技术条件 |
China National Standards EMP |
English PDF |
| GB/T 42472-2023 |
Critical current measurement Retained critical current of silver-coated Bi-2223 superconducting wire after double bending at room tEMPerature {译} 临界电流测量 银包套Bi-2223超导线室温双弯曲后的保留临界电流 |
China National Standards EMP |
English PDF |
| GB/Z 28820.4-2022 |
Long-term radiation aging of polymers - Part 4: Effect of different tEMPeratures and dose rates under radiation conditions {译} 聚合物长期辐射老化 第4部分：辐射条件下不同温度和剂量率的影响 |
China National Standards EMP |
English PDF |
| GB/T 41539-2022 |
Product specifications for satellite remote sensing images of land surface tEMPerature {译} 卫星遥感影像地表温度产品规范 |
China National Standards EMP |
English PDF |
| GB/T 5170.18-2022 |
Test methods for environmental test equipment - Part 18: TEMPerature/humidity combined cycle test equipment {译} 环境试验设备检验方法 第18部分：温度/湿度组合循环试验设备 |
China National Standards EMP |
English PDF |
| GB/T 41654-2022 |
Corrosion of metals and alloys - Method for metallographic examination of specimens after exposure to high tEMPerature corrosive environments {译} 金属和合金的腐蚀 在高温腐蚀环境下暴露后试样的金相检验方法 |
China National Standards EMP |
English PDF |
| GB/T 41605-2022 |
Silicon nitride materials for rolling bearing balls - Test method for indentation fracture resistance at room tEMPerature - Indentation method {译} 滚动轴承球用氮化硅材料 室温压痕断裂阻力试验方法 压痕法 |
China National Standards EMP |
English PDF |
| GB/T 41534-2022 |
Authenticity test of surface tEMPerature remote sensing products {译} 地表温度遥感产品真实性检验 |
China National Standards EMP |
English PDF |
| GB/T 41521-2022 |
General technical requirements for multi-index nucleic acid constant tEMPerature amplification detection microfluidic chip {译} 多指标核酸恒温扩增检测微流控芯片通用技术要求 |
China National Standards EMP |
English PDF |
| GB/T 41544-2022 |
Spatio-tEMPoral data specification for wireless network planning {译} 无线网络规划时空数据规范 |
China National Standards EMP |
English PDF |
| GB/T 34413-2022 |
Standard for payment service of basic old-age insurance benefits for EMPloyees {译} 职工基本养老保险待遇支付服务规范 |
China National Standards EMP |
English PDF |
| GB/T 41407-2022 |
Technical requirements of nucleic acid constant tEMPerature amplification instrument based on microfluidic chip {译} 微流控芯片核酸恒温扩增仪技术要求 |
China National Standards EMP |
English PDF |
| GB/T 41490-2022 |
Test method for rolling contact fatigue of silicon nitride ceramics at room tEMPerature ball plate method {译} 氮化硅陶瓷 室温下滚动接触疲劳试验方法 球板法 |
China National Standards EMP |
English PDF |
| GB/T 33553-2022 |
Facility requirements for public EMPloyment and talent service agency 公共就业和人才服务机构设施设备要求 |
China National Standards EMP |
English PDF |
| GB/T 22688-2022 |
Pressure-type tEMPerature controls for household and similar use 家用和类似用途压力式温度控制器 |
China National Standards EMP |
English PDF |
| GB/T 22687-2022 |
Bimetal tEMPerature controls for household and similar use 家用和类似用途双金属温度控制器 |
China National Standards EMP |
English PDF |
| GB/T 24581-2022 |
Test method for Ⅲ and Ⅴ impurities content in single crystal silicon—Low tEMPerature FT-IR analysis method 硅单晶中III、V族杂质含量的测定 低温傅立叶变换红外光谱法 |
China National Standards EMP |
English PDF |
| GB/T 1094.14-2022 |
Power transformers—Part 14: Liquid-immersed power transformer using high-tEMPerature insulation materials 电力变压器 第14部分：采用高温绝缘材料的液浸式电力变压器 |
China National Standards EMP |
English PDF |
| GB/T 25857-2022 |
Low ambient tEMPerature air source multi-connected heat pump (air conditioner) unit {译} 低环境温度空气源多联式热泵（空调）机组 |
China National Standards EMP |
English PDF |
| GB/T 14536.10-2022 |
Electric automatic controllers - Part 10: Particular requirements for tEMPerature sensitive controllers {译} 电自动控制器 第10部分：温度敏感控制器的特殊要求 |
China National Standards EMP |
English PDF |
| GB/T 42261-2022 |
Metal and other inorganic coatings - thermal cycle test method for thermal barrier coatings under tEMPerature gradient {译} 金属及其他无机覆盖层 温度梯度下热障涂层热循环试验方法 |
China National Standards EMP |
English PDF |
| GB/T 19721.5-2022 |
Marine Forecast and Warning Issues Part 5: Sea TEMPerature Forecast Issues {译} 海洋预报和警报发布 第5部分：海温预报发布 |
China National Standards EMP |
English PDF |
| GB/T 41927-2022 |
Plastics - Thermoset molding compounds - Short-term performance evaluation at elevated tEMPeratures {译} 塑料 热固性模塑料 高温下的短期性能评估 |
China National Standards EMP |
English PDF |
| GB/T 2406.3-2022 |
Plastics - Determination of combustion behavior by the oxygen index method - Part 3: High tEMPerature test {译} 塑料 用氧指数法测定燃烧行为 第3部分：高温试验 |
China National Standards EMP |
English PDF |
| GB/T 19466.5-2022 |
Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction curve tEMPerature, time, enthalpy of reaction and conversion {译} 塑料 差示扫描量热法(DSC) 第5部分: 特征反应曲线温度、时间，反应焓和转化率的测定 |
China National Standards EMP |
English PDF |
| GB/T 33061.11-2022 |
Plastics - Determination of dynamic mechanical properties - Part 11: Glass transition tEMPerature {译} 塑料 动态力学性能的测定 第11部分: 玻璃化转变温度 |
China National Standards EMP |
English PDF |
| GB/T 12085.23-2022 |
Optics and photonics - Environmental test methods - Part 23: Combined test for low pressure and low tEMPerature, atmospheric temperature, high temperature or damp heat {译} 光学和光子学 环境试验方法 第23部分：低压与低温、大气温度、高温或湿热综合试验 |
China National Standards EMP |
English PDF |
| GB/T 12085.22-2022 |
Optics and photonics - Environmental test methods - Part 22: Combined test of low tEMPerature, high temperature or temperature change with impact or random vibration {译} 光学和光子学 环境试验方法 第22部分: 低温、高温或温度变化与碰撞或随机振动综合试验 |
China National Standards EMP |
English PDF |
| GB/T 12085.2-2022 |
Optics and photonics - Environmental test methods - Part 2: Low tEMPerature, high temperature, damp heat {译} 光学和光子学 环境试验方法 第2部分：低温、高温、湿热 |
China National Standards EMP |
English PDF |
| GB/T 41822-2022 |
Hot helium leak detection method for high tEMPerature pressure-bearing parts of nuclear fusion reactor {译} 核聚变堆高温承压部件的热氦检漏方法 |
China National Standards EMP |
English PDF |
| GB/T 41641-2022 |
Measurement of mechanical properties - Tensile test method for REBCO strip at room tEMPerature {译} 力学性能测量 REBCO带材室温拉伸试验方法 |
China National Standards EMP |
English PDF |
| GB/T 41742-2022 |
Low tEMPerature sealing glass for optoelectronic devices {译} 光电器件用低温封接玻璃 |
China National Standards EMP |
English PDF |
| GB/T 41792-2022 |
Plastics - Films and sheets - Determination of cold cracking tEMPerature {译} 塑料制品 薄膜和薄片 冷裂温度的测定 |
China National Standards EMP |
English PDF |
| GB/T 41707-2022 |
Copper-based arsenic removal agent at room tEMPerature {译} 常温铜系脱砷剂 |
China National Standards EMP |
English PDF |
| GB/T 41640-2022 |
Critical current measurement Second-generation high-tEMPerature superconducting long tape critical current and its uniformity along the length direction {译} 临界电流测量 第二代高温超导长带临界电流及其沿长度方向均匀性测量 |
China National Standards EMP |
English PDF |
| GB/T 41872-2022 |
Heat exchangers used in refrigeration systems and heat pumps—TEMPerature, pressure and velocity three-field synergy performance test and evaluation method {译} 制冷系统及热泵用换热器 温度、压力和速度三场协同的性能测试和评价方法 |
China National Standards EMP |
English PDF |
| GB/T 36731-2018 |
TEMPorary construction of the stage and stands of the performance venue safety "No. 1 Amendment" {译} 临时搭建演出场所舞台、看台安全《第1号修改单》 |
China National Standards EMP |
English PDF |
| GB/T 40517-2021 |
Solar thermal storage system for low and medium tEMPerature application 太阳能中低温蓄热装置 |
China National Standards EMP |
English PDF |
| GB/T 40515-2021 |
Ships and marine technology—Globe valves for use in low tEMPerature applications—Design and testing requirements 船舶和海上技术 船用超低温截止阀 设计与试验要求 |
China National Standards EMP |
English PDF |
| GB/T 40380.2-2021 |
Metallic powders—Determination of apparent density and flow rate at elevated tEMPeratures—Part 2: Determination of flow rate at elevated temperatures 金属粉末 高温时松装密度和流速的测定 第2部分：高温时流速的测定 |
China National Standards EMP |
English PDF |
| GB/T 40408-2021 |
Nuclear grade isostatic graphite for high tEMPerature gas-cooled reactor internals 高温气冷堆堆内构件用核级等静压石墨 |
China National Standards EMP |
English PDF |
| GB/T 40404-2021 |
Slag material—Measurement of melting tEMPerature—High temperature metallographic method 渣类材料 熔化温度的测定 高温金相法 |
China National Standards EMP |
English PDF |
| GB/T 40396-2021 |
Test method for glass transition tEMPerature of polymer matrix composites—Dynamic mechanical analysis（DMA） 聚合物基复合材料玻璃化转变温度试验方法 动态力学分析法（DMA） |
China National Standards EMP |
English PDF |
| GB/T 40320-2021 |
Measuring method for mechanical melting tEMPerature of aluminum alloy 铝合金力学熔点测试方法 |
China National Standards EMP |
English PDF |
| GB/T 1425-2021 |
Determination of melting tEMPerature range for precious metals and their alloys—Testing method of thermal analysis 贵金属及其合金熔化温度范围的测定 热分析试验方法 |
China National Standards EMP |
English PDF |
| GB/T 40380.1-2021 |
Metallic powders—Determination of apparent density and flow rate at elevated tEMPeratures—Part 1: Determination of apparent density at elevated temperatures 金属粉末 高温时松装密度和流速的测定 第1部分：高温时松装密度的测定 |
China National Standards EMP |
English PDF |
| GB/T 40286-2021 |
The performance testing method of bi-circulation unit for low-tEMPerature waste heat recovery and utilization 低温双循环余热回收利用装置性能测试方法 |
China National Standards EMP |
English PDF |
| GB/T 40149-2021 |
Construction specifications of credit files for EMPloyees of inspection body and laboratory 检验检测机构从业人员信用档案建设规范 |
China National Standards EMP |
English PDF |
| GB/T 31838.7-2021 |
Solid insulating materials - Dielecteric and resistive properties - Part 7: Resistive properties(DC method) - Measurement of volume resistance and volume resistivity at elevated tEMPeratures 固体绝缘材料 介电和电阻特性 第7部分：电阻特性(DC方法) 高温下测量体积电阻和体积电阻率 |
China National Standards EMP |
English PDF |
| GB/T 22888-2021 |
Leather - Physical and mechanical tests - Determination of cold crack tEMPerature of surface coatings 皮革 物理和机械试验 表面涂层低温脆裂温度的测定 |
China National Standards EMP |
English PDF |
| GB/Z 17624.3-2021 |
Electromagnetic compatibility - General - Part 3: The effects of high-altitude EMP(HEMP) on civil equipment and systems 电磁兼容 综述 第3部分：高空电磁脉冲(HEMP)对民用设备和系统的效应 |
China National Standards EMP |
English PDF |
| GB/T 2424.6-2021 |
Environmental testing-Part 3:Supporting documentation and guidance- Confirmation of the performance of tEMPerature/humidity chambers 环境试验 第3部分：支持文件及导则 温度/湿度试验箱性能确认 |
China National Standards EMP |
English PDF |
| GB/T 2424.5-2021 |
Environmental testing—Part 3:Supporting documentation and guidance—Confirmation of the performance of tEMPerature chambers 环境试验 第3部分：支持文件及导则 温度试验箱性能确认 |
China National Standards EMP |
English PDF |
| GB/T 19216.3-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a tEMPerature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure 在火焰条件下电缆或光缆的线路完整性试验 第3部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法 |
China National Standards EMP |
English PDF |
| GB/T 19216.2-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a tEMPerature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not 在火焰条件下电缆或光缆的线路完整性试验 第2部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法 |
China National Standards EMP |
English PDF |
| GB/T 19216.1-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atEMPerature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed 在火焰条件下电缆或光缆的线路完整性试验 第1部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法 |
China National Standards EMP |
English PDF |
| GB/T 39933-2021 |
Rotational moulding—Test method for low tEMPerature impact 滚塑成型 低温冲击试验 |
China National Standards EMP |
English PDF |
| GB/T 39828-2021 |
Test method for determining elastic modulus of thick ceramic coating at elevated tEMPerature 陶瓷厚涂层的高温弹性模量试验方法 |
China National Standards EMP |
English PDF |
| GB/T 19136-2021 |
Testing method of the accelerated storage stability at elevated tEMPerature for pesticides 农药热储稳定性测定方法 |
China National Standards EMP |
English PDF |
| GB/T 41036-2021 |
General specification for super high-low tEMPerature circular electrical connector for space applications 宇航用超高低温圆形电连接器通用规范 |
China National Standards EMP |
English PDF |
| GB/T 228.1-2021 |
Metallic materials—Tensile testing—Part 1: Method of test at room tEMPerature 金属材料 拉伸试验 第1部分:室温试验方法 |
China National Standards EMP |
English PDF |
| GB/T 40939-2021 |
General requirements for low tEMPerature medical cold store 低温医用冷库通用技术要求 |
China National Standards EMP |
English PDF |
| GB/T 18426-2021 |
Rubber-or plastics-coated fabrics—Low-tEMPerature bend test 橡胶或塑料涂覆织物 低温弯曲试验 |
China National Standards EMP |
English PDF |
| GB/T 40794-2021 |
Measurement method of irreversible magnetic flux loss due to high tEMPerature of rare earth permanent magnet 稀土永磁材料高温磁通不可逆损失检测方法 |
China National Standards EMP |
English PDF |
| GB/T 18113-2021 |
High tEMPerature lanthanum chromite electric heating module 铬酸镧高温电热元件 |
China National Standards EMP |
English PDF |
| GB/T 1687.4-2021 |
Rubber,vulcanized—Determination of tEMPerature rise and resistance to fatigue in flexometer testing—Part 4: Constant-stress flexometer 硫化橡胶 在屈挠试验中温升和耐疲劳性能的测定 第4部分：恒应力屈挠试验 |
China National Standards EMP |
English PDF |
| GB/T 40703-2021 |
Design specifications of medium tEMPerature solar heating system for industrial applications 太阳能中温工业热利用系统设计规范 |
China National Standards EMP |
English PDF |
| GB/T 40768-2021 |
Specifications for video stream and spatial-tEMPoral information fusion encoding 视频流与时空信息融合编码规范 |
China National Standards EMP |
English PDF |
| GB/T 39151-2020 |
Nickel beryllium titanium alloy strip for high tEMPerature elastic component 高温弹性元件用镍铍钛合金带材 |
China National Standards EMP |
English PDF |
| GB/T 38924.2-2020 |
Environmental test methods for civil small and light unmanned aircraft system—Part 2: Low-tEMPerature test 民用轻小型无人机系统环境试验方法 第2部分: 低温试验 |
China National Standards EMP |
English PDF |
| GB/T 38924.3-2020 |
Environmental test methods for civil small and light unmanned aircraft system—Part 3: High-tEMPerature test 民用轻小型无人机系统环境试验方法 第3部分：高温试验 |
China National Standards EMP |
English PDF |
| GB/T 38924.4-2020 |
Environmental test methods for civil small and light unmanned aircraft system—Part 4: TEMPerature and altitude test 民用轻小型无人机系统环境试验方法 第4部分：温度和高度试验 |
China National Standards EMP |
English PDF |
| GB/T 38948-2020 |
Evaluation method for the cracking resistance of asphalt mixture at low tEMPerature 沥青混合料低温抗裂性能评价方法 |
China National Standards EMP |
English PDF |
| GB/T 38917-2020 |
High tEMPerature titanium alloy bars for aerospace 航空航天用高温钛合金棒材 |
China National Standards EMP |
English PDF |
| GB/T 38916-2020 |
High tEMPerature titanium alloy plate and sheet for aerospace 航空航天用高温钛合金板材 |
China National Standards EMP |
English PDF |
| GB/T 38915-2020 |
High tEMPerature titanium alloy forgings for aerospace 航空航天用高温钛合金锻件 |
China National Standards EMP |
English PDF |
| GB/T 38912-2020 |
Test method for closed-end burst of zirconium tubes at room tEMPerature 锆管室温闭端爆破试验方法 |
China National Standards EMP |
English PDF |
| GB/T 25127.1-2020 |
Low ambient tEMPerature air source heat pump （water chilling）packages—Part 1：Heat pump （water chilling）packages for industrial & commercial and similar application 低环境温度空气源热泵（冷水）机组 第1部分：工业或商业用及类似用途的热泵（冷水）机组 |
China National Standards EMP |
English PDF |
| GB/T 25127.2-2020 |
Low ambient tEMPerature air source heat pump （water chilling）packages—Part 2：Heat pump （water chilling）packages for household and similar application 低环境温度空气源热泵（冷水）机组 第2部分：户用及类似用途的热泵（冷水）机组 |
China National Standards EMP |
English PDF |
| GB/T 38936-2020 |
High tEMPerature carburizing steel for bearing 高温渗碳轴承钢 |
China National Standards EMP |
English PDF |
| GB/T 38886-2020 |
High tEMPerature bearing steel 高温轴承钢 |
China National Standards EMP |
English PDF |
| GB/T 38884-2020 |
High tEMPerature stainless steels for bearing 高温不锈轴承钢 |
China National Standards EMP |
English PDF |
| GB/T 38841-2020 |
Mechanical properties measurement—Room tEMPerature tensile test of reacted Nb3Sn composite superconductors 力学性能测量 反应后的Nb3Sn复合超导线室温拉伸试验方法 |
China National Standards EMP |
English PDF |
| GB/T 38804-2020 |
Test method for oxidation of metallic materials exposed in high-tEMPerature steam 金属材料高温蒸汽氧化试验方法 |
China National Standards EMP |
English PDF |
| GB/T 2423.27-2020 |
Environmental testing—Part 2: Test methods—Test method and guidance: Combined tEMPerature or temperature and humidity with low air pressure tests 环境试验 第2部分：试验方法 试验方法和导则：温度/低气压或温度/湿度/低气压综合试验 |
China National Standards EMP |
English PDF |
| GB 27955-2020 |
Hygienic requirements for low-tEMPerature hydrogen peroxide gas plasma sterilizer 过氧化氢气体等离子体低温灭菌器卫生要求 |
China National Standards EMP |
English PDF |
| GB/T 5137.3-2020 |
Test methods of safety glazing materials used on road vehicles—Part 3:Radiation,high tEMPerature,humidity,fire and simulated weathering resistance tests 汽车安全玻璃试验方法 第3部分：耐辐照、高温、潮湿、燃烧和耐模拟气候试验 |
China National Standards EMP |
English PDF |
| GB/T 23605-2020 |
Determination of β transus tEMPerature of titanium alloys 钛合金β转变温度测定方法 |
China National Standards EMP |
English PDF |
| GB/T 7964-2020 |
Sintered metal materials(excluding hardmetal)--Tension testing at room tEMPerature 烧结金属材料(不包括硬质合金) 室温拉伸试验 |
China National Standards EMP |
English PDF |
| GB/T 38534-2020 |
Test method for tensile properties of oriented fibre reinforced polymer matrix composite materials at ultra-low tEMPerature 定向纤维增强聚合物基复合材料超低温拉伸性能试验方法 |
China National Standards EMP |
English PDF |
| GB/T 38515-2020 |
The method for high tEMPerature mechanical properties of quartz fabric-reinforced resin matrix composite materials 石英纤维织物增强树脂基复合材料高温力学性能试验方法 |
China National Standards EMP |
English PDF |
| GB/T 24595-2020 |
Hot-rolled steel bars for quenched and tEMPered automobile crankshafts 汽车调质曲轴用热轧钢棒 |
China National Standards EMP |
English PDF |
| GB/T 38459-2020 |
EMPty glass bottle inspector 玻璃空瓶验瓶机 |
China JB-Machinery Industry Standards EMP |
English PDF |
| GB/T 39682-2020 |
Fine ceramics—Determination of elastic modulus at high tEMPerature or ultra-high temperature—Split ring relative method 精细陶瓷 高温和超高温弹性模量的测定 缺口环相对法 |
China National Standards EMP |
English PDF |
| GB/T 7758-2020 |
Rubber, vulcanized—Determination of low-tEMPerature characteristics—Temperature-retraction procedure (TR test) 硫化橡胶 低温性能的测定 温度回缩程序（TR 试验） |
China National Standards EMP |
English PDF |
| GB/T 6036-2020 |
Rubber,vulcanized or thermoplastic—Determination of low-tEMPerature stiffening(Gehman test) 硫化橡胶或热塑性橡胶 低温刚性的测定（吉门试验） |
China National Standards EMP |
English PDF |
| GB/T 39692-2020 |
Rubber,vulcanized or thermoplastic—Low tEMPerature testing—General introduction and guide 硫化橡胶或热塑性橡胶 低温试验 概述与指南 |
China National Standards EMP |
English PDF |
| GB/T 39260.2-2020 |
Use case methodology—Part 2：Definition of the tEMPlates for use cases,actor list and requirements list 用例方法 第2部分：用例模板、参与方清单和需求清单的定义 |
China National Standards EMP |
English PDF |
| GB/T 32065.8-2020 |
Environmental test methods for oceanographic instruments—Part 8：Change of tEMPerature test 海洋仪器环境试验方法 第8部分：温度变化试验 |
China National Standards EMP |
English PDF |
| GB/T 28799.5-2020 |
Polyethylene of raised tEMPerature resistance (PE-RT) piping systems for hot and cold water installations—Part 5： Fitness for purpose of the system 冷热水用耐热聚乙烯(PE-RT)管道系统 第5部分：系统适用性 |
China National Standards EMP |
English PDF |
| GB/T 28799.3-2020 |
Polyethylene of raised tEMPerature resistance (PE-RT) piping systems for hot and cold water installations—Part 3: Fittings 冷热水用耐热聚乙烯(PE-RT)管道系统 第3部分：管件 |
China National Standards EMP |
English PDF |
| GB/T 28799.2-2020 |
Polyethylene of raised tEMPerature resistance (PE-RT) piping systems for hot and cold water installations—Part 2: Pipes 冷热水用耐热聚乙烯(PE-RT)管道系统 第2部分：管材 |
China National Standards EMP |
English PDF |
| GB/T 28799.1-2020 |
Polyethylene of raised tEMPerature resistance（PE-RT）piping systems for hot and cold water installations—Part 1: General 冷热水用耐热聚乙烯(PE-RT)管道系统 第1部分：总则 |
China National Standards EMP |
English PDF |
| GB/T 3098.24-2020 |
Mechanical properties of fasteners—Stainless steel and nickel alloys bolts, screws, studs and nuts for high tEMPerature applications 紧固件机械性能 高温用不锈钢和镍合金螺栓、螺钉、螺柱和螺母 |
China National Standards EMP |
English PDF |
| GB/T 39249-2020 |
Rubber and plastics hoses and tubing—Textile-reinforced types—Sub-ambient tEMPerature crush test 橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验 |
China National Standards EMP |
English PDF |
| GB/T 38298-2019 |
Test method of auto-ignition tEMPerature for solid chemicals 固体化学品自动点火温度的试验方法 |
China National Standards EMP |
English PDF |
| GB/T 23711.3-2019 |
Test method for pressure vessels lined with plastics—Part 3:High-tEMPerature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 |
China National Standards EMP |
English PDF |
| GB/T 23711.2-2019 |
Test method for pressure vessels lined with plastics—Part 2:Low-tEMPerature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 |
China National Standards EMP |
English PDF |
| GB/T 4797.4-2019 |
Classification of environmental conditions—Environmental conditions appearing in nature—Solar radiation and tEMPerature 环境条件分类 自然环境条件 太阳辐射与温度 |
China National Standards EMP |
English PDF |
| GB/T 1685.2-2019 |
Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with tEMPerature cycling 硫化橡胶或热塑性橡胶 压缩应力松弛的测定 第2部分：循环温度下试验 |
China National Standards EMP |
English PDF |
| GB/T 38430-2019 |
Corrosion of metals and alloys—Test method for isothermal-exposure oxidation testing under high-tEMPerature corrosion conditions for metallic materials 金属和合金的腐蚀 金属材料在高温腐蚀条件下的等温暴露氧化试验方法 |
China National Standards EMP |
English PDF |
| GB/T 38426-2019 |
Test method for thermal resistance and use tEMPerature of sleeping bags 睡袋的热阻和使用温度的测定方法 |
China National Standards EMP |
English PDF |
| GB/T 38375-2019 |
Guide for planning and design of food low tEMPerature distribution center 食品低温配送中心规划设计指南 |
China National Standards EMP |
English PDF |
| GB/T 38298-2019 |
Test method of auto-ignition tEMPerature for solid chemicals 固体化学品自动点火温度的试验方法 |
China National Standards EMP |
English PDF |
| GB/T 23711.3-2019 |
Test method for pressure vessels lined with plastics—Part 3:High-tEMPerature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 |
China National Standards EMP |
English PDF |
| GB/T 23711.2-2019 |
Test method for pressure vessels lined with plastics—Part 2:Low-tEMPerature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 |
China National Standards EMP |
English PDF |
| GB/T 4797.4-2019 |
Classification of environmental conditions—Environmental conditions appearing in nature—Solar radiation and tEMPerature 环境条件分类 自然环境条件 太阳辐射与温度 |
China National Standards EMP |
English PDF |
| GB/T 1685.2-2019 |
Rubber, vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2: Testing with tEMPerature cycling 硫化橡胶或热塑性橡胶 压缩应力松弛的测定 第2部分：循环温度下试验 |
China National Standards EMP |
English PDF |
| GB/T 2423.35-2019 |
Environmental testing—Part 2:Tests and guidance—Combined climatic(tEMPerature/humidity)and dynamic(vibration/shock) tests 环境试验 第2部分：试验和导则 气候(温度、湿度)和动力学(振动、冲击)综合试验 |
China National Standards EMP |
English PDF |
| GB/T 37945-2019 |
Materials for organic light emitting diode display(OLED)—Test method of glass transfer tEMPerature—Differential scanning calorimetry (DSC) 有机发光二极管显示器用材料 玻璃化转变温度测试方法 差热法 |
China National Standards EMP |
English PDF |
| GB/T 37901-2019 |
Technical requirements for laser welding of high tEMPerature titanium alloy 高温钛合金激光焊接技术要求 |
China National Standards EMP |
English PDF |
| GB/T 37819-2019 |
Bi-circulation power generation unit for low-tEMPerature waste heat recovery 低温余热双循环发电装置 |
China National Standards EMP |
English PDF |
| GB/T 37783-2019 |
Metallic materials—High strain rate tensile test method at elevated tEMPerature 金属材料 高应变速率高温拉伸试验方法 |
China National Standards EMP |
English PDF |
| GB/T 26150-2019 |
ExEMPts washes Chinese jujube 免洗红枣 |
China National Standards EMP |
English PDF |
| GB/T 228.3-2019 |
Metallic materials—Tensile testing—Part 3: Method of test at low tEMPerature 金属材料 拉伸试验 第3部分：低温试验方法 |
China National Standards EMP |
English PDF |
| GB/T 37603-2019 |
Medium tEMPerature brazing filler metals of aluminum alloys 铝合金中温钎料 |
China National Standards EMP |
English PDF |
| GB/T 37602-2019 |
Ship and offshore engineering steel for low tEMPerature service 船舶及海洋工程用低温韧性钢 |
China National Standards EMP |
English PDF |
| GB/T 37577-2019 |
Welded large diameter steel pipes for low-tEMPerature-service piping
低温管道用大直径焊接钢管 |
China National Standards EMP |
English PDF |
| GB/T 13477.13-2019 |
Test method for building sealants－Part 13：Determination of adhesion/cohesion properties at variable tEMPeratures 建筑密封材料试验方法 第13部分：冷拉-热压后粘结性的测定 |
China National Standards EMP |
English PDF |
| GB 37480-2019 |
Minimum allowable values of energy efficiency and energy efficiency grades for low ambient tEMPerature air source heat pumps（water chiller） packages 低环境温度空气源热泵（冷水）机组能效限定值及能效等级 |
China National Standards EMP |
English PDF |
| GB/T 1634.2-2019 |
Plastics-Determination of tEMPerature of deflection under load-Part 2:Plastics and ebonite 塑料 负荷变形温度的测定 第2部分：塑料和硬橡胶 |
China National Standards EMP |
English PDF |
| GB/T 1634.1-2019 |
Plastics—Determination of tEMPerature of deflection under load—Part 1:General test method 塑料 负荷变形温度的测定 第1部分:通用试验方法 |
China National Standards EMP |
English PDF |
| GB/T 37382-2019 |
Optical functional films—Films for backlight unit of liquid crystal display—High tEMPerature and high humidity aging measurement 光学功能薄膜 液晶显示背光模组用薄膜 高温高湿老化性能测定方法 |
China National Standards EMP |
English PDF |
| GB/T 37663.3-2019 |
Outdoor EMPirical test requirements for distributed photovoltaic in warm damp climate—Part 3: Grid-connection photovoltaic system 湿热带分布式光伏户外实证试验要求 第3部分：并网光伏系统 |
China National Standards EMP |
English PDF |
| GB/T 37663.2-2019 |
Outdoor EMPirical test requirements for distributed photovoltaic in warm damp dlimate—Part 2: Photovoltaic backsheet 湿热带分布式光伏户外实证试验要求 第2部分：光伏背板 |
China National Standards EMP |
English PDF |
| GB/T 37663.1-2019 |
Outdoor EMPirical test requirements for distributed photovoltaic in warm damp climate—Part 1: Photovoltaic module 湿热带分布式光伏户外实证试验要求 第1部分：光伏组件 |
China National Standards EMP |
English PDF |
| GB/T 37631-2019 |
Man-made fiber—Test method for thermal decomposition tEMPerature 化学纤维 热分解温度试验方法 |
China National Standards EMP |
English PDF |
| GB/T 24959-2019 |
Refrigerated light hydrocarbon fluids—General requirements for tEMPerature measurement system in cargo tanks of LNG carrier 冷冻轻烃流体 液化天然气运输船货舱内温度测量系统一般要求 |
China National Standards EMP |
English PDF |
| GB/T 6525-2019 |
Determination of compression strength for sintered metal materials at room tEMPerature 烧结金属材料室温压缩强度的测定 |
China National Standards EMP |
English PDF |
| GB/T 2423.35-2019 |
Environmental testing—Part 2:Tests and guidance—Combined climatic(tEMPerature/humidity)and dynamic(vibration/shock) tests 环境试验 第2部分：试验和导则 气候(温度、湿度)和动力学(振动、冲击)综合试验 |
China National Standards EMP |
English PDF |
| GB/T 37464-2019 |
Hardening and tEMPering of heavy steel forgings 大型锻钢件的淬火与回火 |
China National Standards EMP |
English PDF |
| GB/T 2423.63-2019 |
Environmental testing—Part 2:Test methods—Test:combined tEMPerature(cold and heat)/low air pressure/vibration(mixed mode) 环境试验 第2部分:试验方法 试验:温度(低温、高温)/低气压/振动(混合模式)综合 |
China National Standards EMP |
English PDF |
| GB/T 21451.5-2019 |
Petroleum and liquid petroleum products—Measurement of level and tEMPerature in storage tanks by automatic methods—Part 5: Measurement of temperature in marine vessels 石油和液体石油产品 储罐中液位和温度自动测量法 第5部分：油船舱中的温度测量 |
China National Standards EMP |
English PDF |
| GB/T 21451.2-2019 |
Petroleum and liquid petroleum products—Measurement of level and tEMPerature in storage tanks by automatic methods—Part 2:Measurement of level in marine vessels 石油和液体石油产品 储罐中液位和温度自动测量法 第2部分: 油船舱中的液位测量 |
China National Standards EMP |
English PDF |
| GB/T 37086-2018 |
Industrial process tEMPerature calibrator 工业过程温度校准器 |
China National Standards EMP |
English PDF |
| GB/T 5170.19-2018 |
Inspection methods for environmental testing equipments—Part 19:Combined tEMPerature vibration(sinusoidal) testing equipment 环境试验设备检验方法-第19部分：温度、振动(正弦)综合试验设备 |
China National Standards EMP |
English PDF |
| GB/T 16430-2018 |
Determination of the minimum ignition tEMPerature of dust layer 粉尘层最低着火温度测定方法 |
China National Standards EMP |
English PDF |
| GB/T 14235.1-2018 |
Low tEMPerature pattern wax material for investment casting—Part 1: Testing methods for physical properties 熔模铸造低温模料-第1部分：物理性能试验方法 |
China National Standards EMP |
English PDF |
| GB/T 14235.2-2018 |
Low tEMPerature pattern wax materials for investment casting—Part 2: Testing methods for usability properties 熔模铸造低温模料-第2部分：使用性能试验方法 |
China National Standards EMP |
English PDF |
| GB/T 37052-2018 |
Test methods for nominal module operating tEMPerature of building integrated photovoltaic(BIPV) modules 光伏建筑一体化（BIPV）组件电池额定工作温度测试方法 |
China National Standards EMP |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
