Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43536.2-2023 |
Three-dimensional integrated circuits Part 2: Calibration requirements for Fine-pitch stacked chips {译} 三维集成电路 第2部分：微间距叠层芯片的校准要求 |
China National Standards Fine |
 English PDF |
| GB/T 43307-2023 |
Determination of room temperature tensile properties of Fine ceramic fiber single filaments {译} 精细陶瓷纤维 单丝室温拉伸性能的测定 |
China National Standards Fine |
English PDF |
| GB/T 43296-2023 |
Test method for room temperature bending fatigue properties of Fine ceramics {译} 精细陶瓷室温弯曲疲劳性能试验方法 |
China National Standards Fine |
English PDF |
| GB 1103.1-2023 |
Cotton Part 1: Sawtoothed Fine Staple Cotton {译} 棉花 第1部分：锯齿加工细绒棉 |
China National Standards Fine |
English PDF |
| GB/T 446-2023 |
Fully reFined paraffin wax {译} 全精炼石蜡 |
China National Standards Fine |
English PDF |
| GB/T 26524-2023 |
ReFined nickel sulfate {译} 精制硫酸镍 |
China National Standards Fine |
English PDF |
| GB/T 42844-2023 |
Micro-bubble technology Storage and transportation of ultra-Fine bubble water dispersion system {译} 微细气泡技术 超细气泡水分散体系的存储和运输 |
China National Standards Fine |
English PDF |
| GB/T 42843.1-2023 |
Microbubble Technology Measurement Sampling and Sample Preparation Part 1: UltraFine Bubble Water Dispersion System {译} 微细气泡技术 测量取样及样品制备 第1部分：超细气泡水分散体系 |
China National Standards Fine |
English PDF |
| GB/T 26725-2023 |
UltraFine tungsten carbide powder {译} 超细碳化钨粉 |
China National Standards Fine |
English PDF |
| GB/T 42667-2023 |
Test method for room temperature isobiaxial bending strength of Fine ceramics - double loop method {译} 精细陶瓷室温等双轴弯曲强度试验方法 双环法 |
China National Standards Fine |
English PDF |
| GB/T 42945-2023 |
Pulp - Determination of Fine fiber mass fraction {译} 纸浆 细小纤维质量分数的测定 |
China National Standards Fine |
English PDF |
| GB/T 18034-2023 |
Specification for platinum-rhodium Fine wire for rapid temperature measurement thermocouple {译} 快速测温热电偶用铂铑细偶丝规范 |
China National Standards Fine |
English PDF |
| GB/T 42523-2023 |
Iron ore Fines - Determination of wet capacity {译} 铁矿粉 湿容量的测定方法 |
China National Standards Fine |
English PDF |
| GB/T 9107-2023 |
reFined cotton {译} 精制棉 |
China National Standards Fine |
English PDF |
| GB/T 10815-2023 |
Fine pottery for daily use {译} 日用精陶器 |
China National Standards Fine |
English PDF |
| GB/T 42524-2023 |
Bulk iron ore Fines - Determination of transportable moisture limit - Compaction curve method {译} 散装铁矿粉 适运水分限量的测定 压实曲线法 |
China National Standards Fine |
English PDF |
| GB/T 26525-2022 |
ReFined cobalt chloride {译} 精制氯化钴 |
China National Standards Fine |
English PDF |
| GB/T 26523-2022 |
ReFined cobalt sulfate {译} 精制硫酸钴 |
China National Standards Fine |
English PDF |
| GB/T 13217.3-2022 |
Testing method of ink Fineness {译} 油墨细度检验方法 |
China National Standards Fine |
English PDF |
| GB/T 254-2022 |
semi-reFined paraffin {译} 半精炼石蜡 |
China National Standards Fine |
English PDF |
| GB/T 42300-2022 |
Safety risk assessment specification for Fine chemical reaction {译} 精细化工反应安全风险评估规范 |
China National Standards Fine |
English PDF |
| GB/T 31280-2022 |
Brand Value Evaluation Wine, Beverage and ReFined Tea Manufacturing {译} 品牌价值评价 酒、饮料和精制茶制造业 |
China National Standards Fine |
English PDF |
| GB/T 41914.1-2022 |
Fine bubble technology - General rules for the use and measurement of fine bubbles - Part 1: Terminology {译} 微细气泡技术 微细气泡使用和测量通则 第1部分：术语 |
China National Standards Fine |
English PDF |
| GB/T 41857-2022 |
Sheet metal Fine-blanking extrusion composite formed parts General technical requirements {译} 金属板料精冲挤压复合成形件 通用技术条件 |
China National Standards Fine |
English PDF |
| GB/T 40123-2021 |
Aluminium and aluminium alloy billet with high purity and Fine grain 高纯净细晶铝及铝合金圆铸锭 |
China National Standards Fine |
English PDF |
| GB/T 40005-2021 |
Weibull statistics for strength data of Fine ceramics 精细陶瓷强度数据的韦布尔统计分析方法 |
China National Standards Fine |
English PDF |
| GB/T 17651.2-2021 |
Measurement of smoke density of cables or optical fiber cables burning under deFined conditions - Part 2: Test procedure and requirements 电缆或光缆在特定条件下燃烧的烟密度测定 第2部分：试验程序和要求 |
China National Standards Fine |
English PDF |
| GB/T 17651.1-2021 |
Measurement of smoke density of cables or optical fiber cables burning under deFined conditions-Part 1:Test apparatus 电缆或光缆在特定条件下燃烧的烟密度测定 第1部分：试验装置 |
China National Standards Fine |
English PDF |
| GB/T 39826-2021 |
Fine ceramics—Determining flexural bond strength—Four-point bending method 精细陶瓷 界面弯曲强度测定 四点弯曲法 |
China National Standards Fine |
English PDF |
| GB/T 30027-2021 |
Round steel short link chains for lifting purposes—Fine tolerance hoist chains for hand operated chain hoists—Grade VH 起重用钢制短环链 手动链式葫芦用高精度链 VH级 |
China National Standards Fine |
English PDF |
| GB/T 30026-2021 |
Round steel short link chains for lifting purposes—Fine tolerance hoist chains for hand operated chain hoists—Grade TH 起重用钢制短环链 手动链式葫芦用高精度链 TH级 |
China National Standards Fine |
English PDF |
| GB/T 10573-2020 |
Tensile testing method for Fine wire of nonferrous metals 有色金属细丝拉伸试验方法 |
China National Standards Fine |
English PDF |
| GB 7300.203-2020 |
Feed additive—Part 2：Vitamins, provitamins and chemically well-deFined substances having similar effect—Betaine 饲料添加剂 第2部分：维生素及类维生素 甜菜碱 |
China National Standards Fine |
English PDF |
| GB/T 12729.4-2020 |
Spices and condiments—Determination of degree of Fineness of grinding（hand sieving method） 香辛料和调味品 磨碎细度的测定（手筛法） |
China National Standards Fine |
English PDF |
| GB/T 70.6-2020 |
Hexagon socket head cap screws－Fine pitch thread 内六角圆柱头螺钉 细牙螺纹 |
China National Standards Fine |
English PDF |
| GB 51283-2020 |
Fire protection standard for engineering design of Fine chemical enterprise 精细化工企业工程设计防火标准 |
China National Standards Fine |
English PDF |
| GB/T 39687-2020 |
Testing method for drying loss of Fine ceramic powders 精细陶瓷粉体干燥损失测试方法 |
China National Standards Fine |
English PDF |
| GB/T 39682-2020 |
Fine ceramics—Determination of elastic modulus at high temperature or ultra-high temperature—Split ring relative method 精细陶瓷 高温和超高温弹性模量的测定 缺口环相对法 |
China National Standards Fine |
English PDF |
| GB/T 39696-2020 |
Determination of flowability of Fine ceramic powders—Calibrated funnel 精细陶瓷粉末流动性测定 标准漏斗法 |
China National Standards Fine |
English PDF |
| GB/T 39280-2020 |
Rods, wires and deposits for tungsten inert gas welding of non alloy and Fine grain steels 钨极惰性气体保护电弧焊用非合金钢及细晶粒钢实心焊丝 |
China National Standards Fine |
English PDF |
| GB/T 39226-2020 |
Requirements on the integrated test for high power converter system of magnetic conFinement fusion 磁约束聚变大电流变流系统集成测试要求 |
China National Standards Fine |
English PDF |
| GB/T 8110-2020 |
Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and Fine grain steels 熔化极气体保护电弧焊用非合金钢及细晶粒钢实心焊丝 |
China National Standards Fine |
English PDF |
| GB/T 32.3-2020 |
Hexagon bolts with wire holes on head—Fine pitch thread 六角头头部带孔螺栓 细牙 |
China National Standards Fine |
English PDF |
| GB 7300.202-2019 |
Feed additives－Part 2：Vitamins, provitamins and chemically well-deFined substances having similar effect－Vitamin D3 oily form 饲料添加剂 第2部分：维生素及类维生素 维生素D3油 |
China National Standards Fine |
English PDF |
| GB 7300.201-2019 |
Feed additives—Part 2：Vitamins,provitamins and chemically well-deFined substances having similar effect—L-Ascorbyl-2-phosphate 饲料添加剂 第2部分：维生素及类维生素 L-抗坏血酸-2-磷酸酯盐 |
China National Standards Fine |
English PDF |
| GB/T 2085.2-2019 |
Aluminium powder—Part 2：Inflammable Fine aluminium powder 铝粉 第2部分：球磨铝粉 |
China National Standards Fine |
English PDF |
| GB/T 37829-2019 |
Iron ore Fines in bulk—Determination of transportable moisture limits—Flow-table method 散装铁矿粉 适运水分限量的测定 流盘试验法 |
China National Standards Fine |
English PDF |
| GB/T 26726-2019 |
UltraFine tungsten powder 超细钨粉 |
China National Standards Fine |
English PDF |
| GB/T 2085.2-2019 |
Aluminium powder—Part 2：Inflammable Fine aluminium powder 铝粉 第2部分：球磨铝粉 |
China National Standards Fine |
English PDF |
| GB/T 1724-2019 |
Paints,varnishes and printing inks—Determination of Fineness of grind 色漆、清漆和印刷油墨 研磨细度的测定 |
China National Standards Fine |
English PDF |
| GB/T 37679-2019 |
Sheet metal parts fabricated by Fine blanking combined with extrusion process—Technological specification 金属板料精冲挤压复合成形件 工艺规范 |
China National Standards Fine |
English PDF |
| GB/T 37246-2018 |
Test method for thermal-shock resistance of Fine ceramics 精细陶瓷抗热震性能试验方法 |
China National Standards Fine |
English PDF |
| GB/T 36991-2018 |
Coking reFined anthracene 焦化精蒽 |
China National Standards Fine |
English PDF |
| GBZ/T 192.6-2018 |
Determination of dust in workplace air - Part 6: Total concentration of ultraFine and fine granules 工作场所空气中粉尘测定-第6部分：超细颗粒和细颗粒总数量浓度 |
China National Standards Fine |
English PDF |
| GB/T 11071-2018 |
Zone-reFined germanium ingot 区熔锗锭 |
China National Standards Fine |
English PDF |
| GB/T 37041-2018 |
Fine barite powder 精细重晶石粉 |
China National Standards Fine |
English PDF |
| GB/T 10045-2018 |
Tubular cored electrodes for non-alloy and Fine grain steels 非合金钢及细晶粒钢药芯焊丝 |
China National Standards Fine |
English PDF |
| GB/T 35099-2018 |
Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single Fine particles in ambient air 微束分析 扫描电镜-能谱法 大气细粒子单颗粒形貌与元素分析 |
China National Standards Fine |
English PDF |
| GB/T 35055-2018 |
Horizontal scraper discharge Fine coal centrifuge 卧式刮刀卸料煤泥离心机 |
China National Standards Fine |
English PDF |
| GB/T 34560.3-2018 |
Structural steels—Part 3: Technical delivery conditions for Fine grain structural steels 结构钢 第3部分：细晶粒结构钢交货技术条件 |
China National Standards Fine |
English PDF |
| GB/T 36677-2018 |
Determination of Fine particle emission rates from copying (including multi-function) devices 复印（包括多功能）设备细颗粒物排放量的测定方法 |
China National Standards Fine |
English PDF |
| GB/T 5293-2018 |
Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and Fine grain steels 埋弧焊用非合金钢及细晶粒钢实心焊丝、药芯焊丝和焊丝-焊剂组合分类要求 |
China National Standards Fine |
English PDF |
| GB/T 33842.5-2018 |
Information technology—Conformance testing methodology for biometric data interchange formats deFined in GB/T 26237—Part 5: Face image data 信息技术 GB/T 26237中定义的生物特征数据交换格式的符合性测试方法 第5部分：人脸图像数据 |
China National Standards Fine |
English PDF |
| GB/T 34783-2017 |
Determination of Fineness of ramie fiber—Pneumatic method 苎麻纤维细度的测定 气流法 |
China National Standards Fine |
English PDF |
| GB/T 34784-2017 |
ReFined flax 精细亚麻 |
China National Standards Fine |
English PDF |
| GB/T 14048.13-2017 |
Low-voltage switchgear and controlgear—Part 5-3: Control circuit devices and switching elements—Requirements for proximity devices with deFined behaviour under fault conditions (PDDB) 低压开关设备和控制设备 第5-3部分：控制电路电器和开关元件 在故障条件下具有确定功能的接近开关（PDDB）的要求 |
China National Standards Fine |
English PDF |
| GB/T 33842.2-2017 |
Information technology—Conformance testing methodology for biometric data interchange formats deFined in GB/T 26237—Part 2: Finger minutiae data 信息技术 GB/T 26237中定义的生物特征数据交换格式的符合性测试方法 第2部分：指纹细节点数据 |
China National Standards Fine |
English PDF |
| GB/T 33842.4-2017 |
Information technology—Conformance testing methodology for biometric data interchange formats deFined in GB/T 26237—Part 4: Finger image data 信息技术 GB/T 26237中定义的生物特征数据交换格式的符合性测试方法 第4部分：指纹图像数据 |
China National Standards Fine |
English PDF |
| GB/T 35161-2017 |
Ultra-Fine portland cement 超细硅酸盐水泥 |
China National Standards Fine |
English PDF |
| GB/T 35358.1-2017 |
Inlet air cleaning equipment for vehicle engines and compressors—Part 1: Fractional efficiency testing with Fine particles(0.3 μm to 5 μm optical diameter) 汽车发动机和压缩机进气空气滤清装置 第1部分：细颗粒分级效率测试(0.3μm到5μm) |
China National Standards Fine |
English PDF |
| GB/T 17850.5-2017 |
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 5:Nickel reFinery slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第5部分：镍精炼渣 |
China National Standards Fine |
English PDF |
| GB/T 14853.2-2016 |
Pelletized carbon black for rubber—Part 2: Determination of Fines content and pellet attrition 橡胶用造粒炭黑 第2部分: 细粉含量和颗粒磨损量的测定 |
China National Standards Fine |
English PDF |
| GB/T 889.2-2016 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1—Fine pitch thread 1型非金属嵌件六角锁紧螺母 细牙 |
China National Standards Fine |
English PDF |
| GB/T 6187.2-2016 |
Prevailing torque type all-metal hexagon nuts with flange, style 2—Fine pitch thread 2型全金属六角法兰面锁紧螺母 细牙 |
China National Standards Fine |
English PDF |
| GB/T 6185.2-2016 |
Prevailing torque type all-metal hexagon nuts,style 2—Fine pitch thread 2型全金属六角锁紧螺母 细牙 |
China National Standards Fine |
English PDF |
| GB/T 6183.2-2016 |
Prevailing torque type hexagon nuts with flange(with non-metallic insert), style 2—Fine pitch thread 2型非金属嵌件六角法兰面锁紧螺母 细牙 |
China National Standards Fine |
English PDF |
| GB/T 6177.2-2016 |
Hexagon nuts with flange,style 2—Fine pitch thread 2型六角法兰面螺母 细牙 |
China National Standards Fine |
English PDF |
| GB/T 6176-2016 |
Hexagon nuts,style2—Fine pitch thread 2型六角螺母 细牙 |
China National Standards Fine |
English PDF |
| GB/T 6171-2016 |
Hexagon regular nuts（style1）with metric Fine pitch thread 六角标准螺母（1型） 细牙 |
China National Standards Fine |
English PDF |
| GB/T 5786-2016 |
Hexagon head bolts—Fine pitch thread—Full thread 六角头螺栓 细牙 全螺纹 |
China National Standards Fine |
English PDF |
| GB/T 5785-2016 |
Hexagon head bolts—Fine pitch thread 六角头螺栓 细牙 |
China National Standards Fine |
English PDF |
| GB/T 16674.2-2016 |
Hexagon bolts with flange—Fine pitch thread—Small series 六角法兰面螺栓 细牙 小系列 |
China National Standards Fine |
English PDF |
| GB/T 6173-2015 |
Hexagon thin nuts—Fine pitch thread 六角薄螺母 细牙 |
China National Standards Fine |
English PDF |
| GB/T 20830-2015 |
PROFIsafe-Profile for Safety Technology on PROFIBUS DP and PROFineT IO 基于PROFIBUS DP和PROFINET IO的功能安全通信行规-PROFIsafe |
China National Standards Fine |
English PDF |
| GB/T 18147.4-2015 |
Test method for hemp fiber—Part 4: Test method for Fineness of hemp fiber 大麻纤维试验方法 第4部分：细度试验方法 |
China National Standards Fine |
English PDF |
| GB/T 31541-2015 |
Test method for interfacial bond strength of Fine ceramic materials—Cross-bonded 精细陶瓷界面拉伸和剪切粘结强度试验方法 十字交叉法 |
China National Standards Fine |
English PDF |
| GB/T 25105.3-2014 |
Industrial communication networks―Fieldbus specifications―Type 10 PROFineT IO specifications―Part 3: PROFINET IO communication profile 工业通信网络 现场总线规范 类型10：PROFINET IO规范 第3部分：PROFINET IO通信行规 |
China National Standards Fine |
English PDF |
| GB/T 25105.2-2014 |
Industrial communication networks―Fieldbus specifications―Type 10: PROFineT IO Specifications―Part 2: Application layer protocol specification 工业通信网络 现场总线规范 类型10：PROFINET IO规范 第2部分：应用层协议规范 |
China National Standards Fine |
English PDF |
| GB/T 25105.1-2014 |
Industrial communication networks―Fieldbus specifications―Type 10 PROFineT IO Specifications―Part 1: Application layer service definition 工业通信网络 现场总线规范 类型10：PROFINET IO规范 第1部分：应用层服务定义 |
China National Standards Fine |
English PDF |
| GB/T 31280-2014 |
Brand valuation—Wine, drink and reFined tea manufacturing industry 品牌价值评价 酒、饮料和精制茶制造业 |
China National Standards Fine |
English PDF |
| GB/T 31183-2014 |
Technical requirements of manufacturing consulting service for high pressure hydrogen equipment of oil-reFinery 炼油临氢高压设备制造监理技术要求 |
China National Standards Fine |
English PDF |
| GB/T 2383-2014 |
Powder dyes―Determination of Fineness by sieve analysis 粉状染料 筛分细度的测定 |
China National Standards Fine |
English PDF |
| GB/T 30707-2014 |
Testing method on adhesion of Fine ceramic coatings―Scratching 精细陶瓷涂层结合力试验方法 划痕法 |
China National Standards Fine |
English PDF |
| GB/T 30573-2014 |
Fine blanked parts―General technical requirements 精密冲裁件 通用技术条件 |
China National Standards Fine |
English PDF |
| GB/T 30572-2014 |
Fine blanked parts―Compiling rules of processes 精密冲裁件 工艺编制原则 |
China National Standards Fine |
English PDF |
| GB/T 30218-2013 |
Fine blanking dies―Specifications 精冲模 技术条件 |
China National Standards Fine |
English PDF |
| GB/T 25740.2-2013 |
PROFIBUS & PROFineT technical profile PROFIdrive—Part 2: Mapping of profile to network technologies PROFIBUS & PROFINET 技术行规 PROFIdrive 第2部分：行规到网络技术的映射 |
China National Standards Fine |
English PDF |
| GB/T 25740.1-2013 |
PROFIBUS & PROFineT technical profile PROFIdrive―Part 1: Profile specifications PROFIBUS & PROFINET 技术行规 PROFIdrive 第1部分：行规规范 |
China National Standards Fine |
English PDF |
| GB/T 30071-2013 |
High-density and Fine-particle special graphite product 细颗粒高密度特种石墨产品 |
China National Standards Fine |
English PDF |
| GB/T 4757-2013 |
Methods for the batch flotation testing of Fine coal 煤粉（泥）实验室单元浮选试验方法 |
China National Standards Fine |
English PDF |
| GB/T 30047-2013 |
Method for evaluating the flotability of Fine coal 煤粉（泥）可浮性评定方法 |
China National Standards Fine |
English PDF |
| GB/T 30027-2013 |
Short link chains for lifting purposes - Grade VH,Fine tolerance for manually operated chain hoists 起重用短环链 VH级手动链式葫芦用高精度链 |
China National Standards Fine |
English PDF |
| GB/T 30026-2013 |
Short link chains for lifting purposes - Grade TH,Fine tolerance for manually operated chain hoists 起重用短环链 TH级手动链式葫芦用高精度链 |
China National Standards Fine |
English PDF |
| GB/T 50837-2013 |
Standard for non-ferrous metal reFinery drawings 有色金属冶炼工程制图标准 |
China National Standards Fine |
English PDF |
| GB/T 4960.9-2013 |
Glossary of nuclear science and technology terms - Part 9：Magnetic conFinement fusion 核科学技术术语 第9部分：磁约束核聚变 |
China National Standards Fine |
English PDF |
| GB/T 27894.6-2012 |
Natural gas - Determination of composition with deFined uncertainty by gas chromatography - Part 6: Determination of hydrogen helium oxygen nitrogen carbon dioxide and C1 to C8 hydrocarbons using three capillary columns 天然气 在一定不确定度下用气相色谱法测定组成 第6部分：用三根毛细管色谱柱测定氢、氦、氧、氮、二氧化碳和C1至C8的烃类 |
China National Standards Fine |
English PDF |
| GB 11887-2012 |
Jewellery - Fineness of precious metal alloys and designation 首饰 贵金属纯度的规定及命名方法 |
China National Standards Fine |
English PDF |
| GB/T 5117-2012 |
Covered electrodes for manual metal arc welding of non-alloy and Fine grain steels 非合金钢及细晶粒钢焊条 |
China National Standards Fine |
English PDF |
| GB/T 27894.5-2012 |
Natural gas - Determination of composition with deFined uncertainty by gas chromatography - Part 5: Determination of nitrogen,carbon dioxideand C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns 天然气 在一定不确定度下用气相色谱法测定组成 第5部分：实验室和在线工艺系统中用三根色谱柱测定氮、二氧化碳和C1至C5及C6+的烃类 |
China National Standards Fine |
English PDF |
| GB/T 27894.4-2012 |
Natural gas - Determination of composition with deFined uncertainty by gas chromatography - Part 4: Determination of nitrogen,carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns 天然气 在一定不确定度下用气相色谱法测定组成 第4部分：实验室和在线测量系统中用两根色谱柱测定氮、二氧化碳和C1至C5及C6+的烃类 |
China National Standards Fine |
English PDF |
| GB/T 28509-2012 |
UltraFine coaxial cables with insulation diameter below 1mm and cable assemblies 绝缘外径在1mm以下的极细同轴电缆及组件 |
China National Standards Fine |
English PDF |
| GB/T 28272-2012 |
Metric screw threads with extra Fine pitch - Series and basic dimensions 米制超细牙螺纹 系列和基本尺寸 |
China National Standards Fine |
English PDF |
| GB/T 28271-2012 |
Metric screw threads with extra Fine pitch - Tolerances 米制超细牙螺纹 公差 |
China National Standards Fine |
English PDF |
| GB/T 27894.3-2011 |
Natrual gas - Determination of composition with deFined uncertainty by gas chromatography - Part 3: Determination of hydrogen,helium,oxyen,nitrogen,carbon dioxide and hydrocarbons up to C8 using two packed columns 天然气 在一定不确定度下用气相色谱法测定组成 第3部分：用两根填充柱测定氢、氦、氧、氮、二氧化碳和直至C8的烃类 |
China National Standards Fine |
English PDF |
| GB/T 27894.2-2011 |
Natural gas - Determination of composition with deFined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data 天然气 在一定不确定度下用气相色谱法测定组成 第2部分：测量系统的特性和数理统计 |
China National Standards Fine |
English PDF |
| GB/T 27894.1-2011 |
Natural gas - Determination of composition with deFined uncertainty by gas chromatogramphy - Part 1：Guidelines for tailored analysis 天然气 在一定不确定度下用气相色谱法测定组成 第1部分：分析导则 |
China National Standards Fine |
English PDF |
| GB/T 27596-2011 |
Dyestuffs - Determination of particle Fineness - Microscope method 染料 颗粒细度的测定 显微镜法 |
China National Standards Fine |
English PDF |
| GB/T 26726-2011 |
superFine powder of tungsten 超细钨粉 |
China National Standards Fine |
English PDF |
| GB/T 26725-2011 |
superFine powder of tungsten carbide 超细碳化钨粉 |
China National Standards Fine |
English PDF |
| GB/T 26525-2011 |
ReFined cobaltous chloride 精制氯化钴 |
China National Standards Fine |
English PDF |
| GB/T 26524-2011 |
ReFined nickel sulfates 精制硫酸镍 |
China National Standards Fine |
English PDF |
| GB/T 26523-2011 |
ReFined cobaltous sulfates 精制硫酸钴 |
China National Standards Fine |
English PDF |
| GB/T 26522-2011 |
ReFined nickelous chloride 精制氯化镍 |
China National Standards Fine |
English PDF |
| GB/T 26285-2010 |
SuperFine cobalt powder 超细钴粉 |
China National Standards Fine |
English PDF |
| GB/T 25995-2010 |
Test methods for density and apparent porostiy of Fine ceramics 精细陶瓷密度和显气孔率试验方法 |
China National Standards Fine |
English PDF |
| GB/T 26022-2010 |
Sampling of reFined nickel 精炼镍取样方法 |
China National Standards Fine |
English PDF |
| GB/T 25951.2-2010 |
Nickel and nickel alloys - Terms and definitions - Part 2: ReFinery products 镍及镍合金 术语和定义 第2部分：精炼产品 |
China National Standards Fine |
English PDF |
| GB/T 25435-2010 |
Fine filtration board 精细过滤纸板 |
China National Standards Fine |
English PDF |
| GB/T 25176-2010 |
Recycled Fine aggregate for concrete and mortar 混凝土和砂浆用再生细骨料 |
China National Standards Fine |
English PDF |
| GB/T 25243-2010 |
Gansu alpine Fine-wool sheep 甘肃高山细毛羊 |
China National Standards Fine |
English PDF |
| GB/T 25242-2010 |
Ao han Finewool sheep 敖汉细毛羊 |
China National Standards Fine |
English PDF |
| GB/T 25167-2010 |
Xinji Fine wool sheep 新吉细毛羊 |
China National Standards Fine |
English PDF |
| GB/T 446-2010 |
Fully reFined paraffin wax 全精炼石蜡 |
China National Standards Fine |
English PDF |
| GB/T 254-2010 |
Semi-reFined paraffin wax 半精炼石蜡 |
China National Standards Fine |
English PDF |
| GB 50530-2010 |
Code for design of alumina reFinery process 氧化铝厂工艺设计规范 |
China National Standards Fine |
English PDF |
| GB/T 3098.22-2009 |
Mechanical properties of fasteners made of the Fine grain non-heat treatment steel - Bolts,screws and studs 紧固件机械性能 细晶非调质钢螺栓、螺钉和螺柱 |
China National Standards Fine |
English PDF |
| GB/T 24205-2009 |
Iron ores Fines - Method for presentation the results of sintering test 铁矿粉 烧结试验结果表示方法 |
China National Standards Fine |
English PDF |
| GB/T 24199-2009 |
ReFined pyridine - Determination of pyridine content - Gas chromatographic method 纯吡啶中吡啶含量的气相色谱测定方法 |
China National Standards Fine |
English PDF |
| GB/T 23807-2009 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Classification systemecification 精细陶瓷分类系统 |
China National Standards Fine |
English PDF |
| GB/T 23806-2009 |
Fine ceramics (advanced ceramics,advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method 精细陶瓷断裂韧性试验方法 单边预裂纹梁(SEPB)法 |
China National Standards Fine |
English PDF |
| GB/T 23805-2009 |
Fine ceramics(advanced ceramics,advanced technical ceramics) - Test method for tensile strength of monolithic ceramics at room temperature 精细陶瓷室温拉伸强度试验方法 |
China National Standards Fine |
English PDF |
| GB/T 17991-2009 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Vocabulary 精细陶瓷术语 |
China National Standards Fine |
English PDF |
| GB/T 16534-2009 |
Fine ceramics（advanced ceramics,advanced technical ceramics）- Test method for hardness of monolithic ceramics at room temperature 精细陶瓷室温硬度试验方法 |
China National Standards Fine |
English PDF |
| GB/T 23759-2009 |
Fine parchment 特细羊皮纸 |
China National Standards Fine |
English PDF |
| GB/T 1777-2009 |
SuperFine palladium powder 超细钯粉 |
China National Standards Fine |
English PDF |
| GB/T 1776-2009 |
SuperFine platinum powder 超细铂粉 |
China National Standards Fine |
English PDF |
| GB/T 1775-2009 |
SuperFine gold powder 超细金粉 |
China National Standards Fine |
English PDF |
| GB/T 1774-2009 |
SuperFine silver powder 超细银粉 |
China National Standards Fine |
English PDF |
| GB/T 13217.3-2008 |
Test method for Fineness of grind of liquid ink 液体油墨细度检验方法 |
China National Standards Fine |
English PDF |
| GB/T 22643-2008 |
ReFined aluminum wire 精铝丝 |
China National Standards Fine |
English PDF |
| GB/T 5507-2008 |
Inspection of grain and oils - Determination for Fineness degree of flours 粮油检验 粉类粗细度测定 |
China National Standards Fine |
English PDF |
| GB/T 22427.5-2008 |
Starch - Determination of Fineness 淀粉细度测定 |
China National Standards Fine |
English PDF |
| GB/T 16535-2008 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique 精细陶瓷线热膨胀系数试验方法 顶杆法 |
China National Standards Fine |
English PDF |
| GB/T 14390-2008 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature 精细陶瓷高温弯曲强度试验方法 |
China National Standards Fine |
English PDF |
| GB/T 3520-2008 |
Test method for Fineness of graphite 石墨细度试验方法 |
China National Standards Fine |
English PDF |
| GB/T 12729.4-2008 |
Spices and condiments - Determination of degree of Fineness of grinding - Hand sieving method 香辛料和调味品 磨碎细度的测定(手筛法) |
China National Standards Fine |
English PDF |
| GB/T 17260-2008 |
Determination of Fineness of flax - Permeametric method 亚麻纤维细度的测定 气流法 |
China National Standards Fine |
English PDF |
| GB/T 21990-2008 |
Polyvinyl chloride (PVC) pastes - Determination of Fineness of grind 聚氯乙烯（PVC）糊 刮板细度的测定 |
China National Standards Fine |
English PDF |
| GB/T 21867.2-2008 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2:Assessment from the change in Fineness of grind 颜料和体质颜料 分散性的评定方法 第2部分:由研磨细度的变化进行评定 |
China National Standards Fine |
English PDF |
| GB/T 17473.2-2008 |
Test methods of presious metals pastes used for microelectronics - Determination of Fineness 微电子技术用贵金属浆料测试方法 细度测定 |
China National Standards Fine |
English PDF |
| GB/T 6753.1-2007 |
Paints 、varnishes and printing inks - Determination of Fineness of grind 色漆、清漆和印刷油墨 研磨细度的测定 |
China National Standards Fine |
English PDF |
| GB/T 21059-2007 |
Plastics - polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with deFined shear rate 塑料 液态或乳液态或分散体系聚合物/树脂 用旋转黏度计在规定剪切速率下黏度的测定 |
China National Standards Fine |
English PDF |
| GB/T 2075-2007 |
Classification and application of hard cutting materials for metal removal with deFined cutting edges ― Designation of the main groups and groups of application 切削加工用硬切削材料的分类和用途 大组和用途小组的分类代号 |
China National Standards Fine |
English PDF |
| GB/T 20947-2007 |
Short-link chain for lifting purposes - Grade T,(types T,DAT and DT),Fine-tolerance hoist chain 起重用短环链 T级(T、DAT和DT型)高精度葫芦链 |
China National Standards Fine |
English PDF |
| GB/T 21043-2007 |
Instrument for soil test - Strain-controlled unconFined compression apparatus 土工试验仪器 应变控制式无侧限压缩仪 |
China National Standards Fine |
English PDF |
| GB/T 2085.2-2007 |
Aluminum powder - Part 2: Inflammable Fine aluminum powder 铝粉 第2部分：球磨铝粉 |
China National Standards Fine |
English PDF |
| GB/Z 20830-2007 |
PROFIsafe-Profile for Safety Technology on PROFIBUS DP and PROFineT IO 基于PROFIBUS DP和PROFINET IO的功能安全通信行规-PROFIsafe |
China National Standards Fine |
English PDF |
| GB/T 14048.13-2006 |
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with deFined behaviour under fault conditions(PDF) 低压开关设备和控制设备 第5-3部分：控制电路电器和开关元件-在故障条件下具有确定功能的接近开关（PDF）的要求 |
China National Standards Fine |
English PDF |
| GB/Z 20541.2-2006 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems Type 10：PROFineT Specification - Part 2: Application Layer protocol specification 测量和控制数字数据通信 工业控制系统用现场总线 类型10：PROFINET规范 第2部分：应用层协议规范 |
China National Standards Fine |
English PDF |
| GB/Z 20541.1-2006 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems Type 10：PROFineT Specification - Part 1: Application layer service definition 测量和控制数字数据通信 工业控制系统用现场总线 类型10：PROFINET规范 第1部分：应用层服务定义 |
China National Standards Fine |
English PDF |
| GB/T 14853.2-2006 |
Rubber compounding ingredients―Carbon black―Part 2: pelletized-Determination of Fines content and pellet attrition 橡胶用造粒炭黑 第2部分： 细粉含量和粒子磨损量的测定 |
China National Standards Fine |
English PDF |
| GB/T 11071-2006 |
Zone-reFined germanium ingot 区熔锗锭 |
China National Standards Fine |
English PDF |
| GB/T 20197-2006 |
DeFine, classify, marking and degradability requirement of degradable plastic 降解塑料的定义、分类、标识和降解性能要求 |
China National Standards Fine |
English PDF |
| GB/T 8489-2006 |
Test method for compressive strength of Fine ceramics (advanced ceramics, advanced technical ceramics) 精细陶瓷压缩强度试验方法 |
China National Standards Fine |
English PDF |
| GB/T 6569-2006 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature 精细陶瓷弯曲强度试验方法 |
China National Standards Fine |
English PDF |
| GB/T 20117-2006 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic powders 精细陶瓷粉体颗粒尺寸分布测试用样品的制备 |
China National Standards Fine |
English PDF |
| GB/T 10700-2006 |
Test methods for elastic moduli of Fine ceramics (advanced ceramics, advanced technical ceramics) - Bending method 精细陶瓷弹性模量试验方法 弯曲法 |
China National Standards Fine |
English PDF |
| GB 12942-2006 |
Safety code for painting - Technical requirements of safety for working in conFined spaces 涂装作业安全规程 有限空间作业安全技术要求 |
China National Standards Fine |
English PDF |
| GB/T 6979.2-2005 |
Equipment for harvesting-Combines and functional components Part 2:Assessment of characteristics and performance deFined in vocabulary 收获机械 联合收割机及功能部件 第2部分:在词汇中定义的性能和特征评价 |
China National Standards Fine |
English PDF |
| GB/T 19787-2005 |
Heat-shrinkable PolyoleFine Films for Packaging Materials 包装材料 聚烯烃热收缩薄膜 |
China National Standards Fine |
English PDF |
| GB/T 19811-2005 |
Plastics-Determination of the degree of disintegration of plastic materials under deFined composting conditions in a pilot-scale test 在定义堆肥化中试条件下 塑料材料崩解程度的测定 |
China National Standards Fine |
English PDF |
| GB/T 1345-2005 |
The test sieving method for Fineness of cement 水泥细度检验方法 筛析法 |
China National Standards Fine |
English PDF |
| GB/T 16674.2-2004 |
Hexagon bolts with flange with metric Fine pitch thread--Small series 六角法兰面螺栓 细牙 小系列 |
China National Standards Fine |
English PDF |
| GB/T 6609.28-2004 |
Chemical analysis methods and determination of physical performance of alumina--Determination of the Fine particle size distribution(less than 60μm)--Method using electroformed sieves 氧化铝化学分析方法和物理性能测定方法 小于60μm的细粉末粒度分布的测定 湿筛法 |
China National Standards Fine |
English PDF |
| GB/T 10664-2003 |
Pigment printing ink--Determination of printing shade，relative strength and granule Fineness 涂料印花色浆 色光、着色力及颗粒细度的测定 |
China National Standards Fine |
English PDF |
| GB/T 19096-2003 |
Technical drawing--Drawing presentation--Vocabu-lary and indications for edges of undeFined shape 技术制图 图样画法 未定义形状边的术语和注法 |
China National Standards Fine |
English PDF |
| GB/T 10815-2002 |
Domestic Fine pottery 日用精陶器 |
China National Standards Fine |
English PDF |
| GB/T 889.2-2000 |
Prevailing torque type hexagon nuts(with non-metallic insert)，style 1，with Fine pitch thread 1型非金属嵌件六角锁紧螺母 细牙 |
China National Standards Fine |
English PDF |
| GB/T 6187.2-2000 |
Prevailing torque type all-metal hexagon nuts with flange with Fine pitch thread 全金属六角法兰面锁紧螺母 细牙 |
China National Standards Fine |
English PDF |
| GB/T 6185.2-2000 |
Prevailing torque type all-metal hexagon nuts，style 2，with Fine pitch thread 2型全金属六角锁紧螺母 细牙 |
China National Standards Fine |
English PDF |
| GB/T 6183.2-2000 |
Prevailing torque type hexagon nutswith flange(with non-metallic insert) with Fine pitch thread 非金属嵌件六角法兰面锁紧螺母 细牙 |
China National Standards Fine |
English PDF |
| GB/T 6177.2-2000 |
Hexagon nuts with flange--Fine pitch thread 六角法兰面螺母 细牙 |
China National Standards Fine |
English PDF |
| GB/T 6176-2000 |
Hexagon nuts，style 2，with Fine pitch thread 2型六角螺母 细牙 |
China National Standards Fine |
English PDF |
| GB/T 6171-2000 |
Hexagon nuts，style 1，with Fine pitch thread 1型六角螺母 细牙 |
China National Standards Fine |
English PDF |
| GB/T 5786-2000 |
Hexagon head bolts with Fine pitch thread--Full thread 六角头螺栓 细牙 全螺纹 |
China National Standards Fine |
English PDF |
| GB/T 5785-2000 |
Hexagon head bolts with Fine pitch thread 六角头螺栓 细牙 |
China National Standards Fine |
English PDF |
| GB/T 3098.4-2000 |
Mechanical properties of fasteners--Nuts--Fine pitch thread 紧固件机械性能 螺母 细牙螺纹 |
China National Standards Fine |
English PDF |
| GB/T 18195-2000 |
Hexagon nuts for Fine mechanics 精密机械用六角螺母 |
China National Standards Fine |
English PDF |
| GB/T 18104-2000 |
Konjak reFined powder 魔芋精粉 |
China National Standards Fine |
English PDF |
| GB/T 9107-1999 |
ReFined cotton 精制棉 |
China National Standards Fine |
English PDF |
| Find out:229Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
