Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 7000.204-2023 |
Luminaires Part 2-4: Special requirements for portable General purpose luminaires {译} 灯具 第2-4部分:特殊要求 可移式通用灯具 |
China National Standards General purpose |
English PDF |
GB/T 7000.201-2023 |
Luminaires Part 2-1: Special requirements Fixed General purpose luminaires {译} 灯具 第2-1部分:特殊要求 固定式通用灯具 |
China National Standards General purpose |
English PDF |
GB 175-2023 |
General purpose Portland Cement {译} 通用硅酸盐水泥 |
China National Standards General purpose |
English PDF |
GB/T 43409-2023 |
Metallographic examination of carbon steel and low alloy steel castings for general engineering and structural purposes {译} 一般工程与结构用碳钢及低合金钢铸件金相检验 |
China National Standards General purpose |
English PDF |
GB/T 42710.1-2023 |
DC plugs and socket-outlets for household and similar purposes Part 1: General requirements {译} 家用和类似用途直流插头插座 第1部分:通用要求 |
China National Standards General purpose |
English PDF |
GB/T 10802-2023 |
General purpose flexible polyurethane foam {译} 通用软质聚氨酯泡沫塑料 |
China National Standards General purpose |
English PDF |
GB/T 42601.3-2023 |
Petroleum, heavy chemical and natural gas industries - Lubrication, shaft sealing and control oil systems and auxiliary equipment - Part 3: Oil systems for General purposes {译} 石油、重化学和天然气工业 润滑、轴密封和控制油系统及辅助设备 第3部分:一般用途的油系统 |
China National Standards General purpose |
English PDF |
GB/T 5338.1-2023 |
Series 1 containers - Technical requirements and test methods - Part 1: General purpose containers {译} 系列1集装箱 技术要求和试验方法 第1部分:通用集装箱 |
China National Standards General purpose |
English PDF |
GB/T 7233.1-2023 |
Steel castings - Ultrasonic testing - Part 1: Steel castings for General purposes {译} 铸钢件 超声检测 第1部分:一般用途铸钢件 |
China National Standards General purpose |
English PDF |
GB/T 42389.1-2023 |
Central electric heating systems for household and similar purposes - Part 1: General requirements {译} 家用和类似用途中央电暖系统 第1部分:通用要求 |
China National Standards General purpose |
English PDF |
GB/T 40479-2021 |
Dimensions and performance requirements of general-purpose half pallets 通用半托盘尺寸及性能要求 |
China National Standards General purpose |
English PDF |
GB/T 40481-2021 |
Dimensions and performance requirements of general-purpose slip sheet pallets for through transit of goods 联运通用滑板托盘尺寸及性能要求 |
China National Standards General purpose |
English PDF |
GB/T 39795-2021 |
Conveyor belts for General purpose use—Electrical and flammability safety requirements 普通用途输送带 导电性和可燃性安全要求 |
China National Standards General purpose |
English PDF |
GB/T 41135.1-2021 |
Current and voltage sensors or detectors, to be used for fault passage indication purposes -- Part 1: General principles and requirements 故障路径指示用电流和电压传感器或探测器?? 第1部分:通用原理和要求 |
China National Standards General purpose |
English PDF |
GB/T 40565.3-2021 |
Connections for hydraulic fluid power—Quick-action couplings—Part 3:Screw connection type for General purpose 液压传动连接 快换接头 第3部分:螺纹连接通用型 |
China National Standards General purpose |
English PDF |
GB/T 40712-2021 |
General technical specification for multipurpose goods vehicle 多用途货车通用技术条件 |
China National Standards General purpose |
English PDF |
GB/T 2099.1-2021 |
Plugs and socket-outlets for household and similar purposes—Part 1: General requirements 家用和类似用途插头插座 第1部分:通用要求 |
China National Standards General purpose |
English PDF |
GB/T 24242.2-2020 |
Non-alloy steel wire rod for conversion to wire —Part 2:Specific requirements for General purpose wire rod 制丝用非合金钢盘条 第2部分:一般用途盘条 |
China National Standards General purpose |
English PDF |
GB/T 16762-2020 |
Characteristics and specifications of steel wire rope slings for General purposes 一般用途钢丝绳吊索特性和技术条件 |
China National Standards General purpose |
English PDF |
GB/T 5584.1-2020 |
Rectangular copper or aluminium and its alloy wires for electrical purposes—Part 1: General 电工用铜、铝及其合金扁线 第1部分:一般规定 |
China National Standards General purpose |
English PDF |
GB/T 5862-2020 |
Agricultural tractors and machinery—General purpose quick-action hydraulic couplers 农业拖拉机和机械 通用液压快换接头 |
China National Standards General purpose |
English PDF |
GB/T 17037.1-2019 |
Plastics-Injection moulding of test specimens of thermoplastic materials-Part 1:General principles,and moulding of multipurpose and bar test specimens 塑料 热塑性塑料材料注塑试样的制备 第1部分:一般原理及多用途试样和长条形试样的制备 |
China National Standards General purpose |
English PDF |
GB/T 5761-2018 |
Suspension polyvinyl chloride resins of General purpose 悬浮法通用型聚氯乙烯树脂 |
China National Standards General purpose |
English PDF |
GB/T 12225-2018 |
General purpose industrial valves—Specification of copper alloy castings 通用阀门 铜合金铸件技术条件 |
China National Standards General purpose |
English PDF |
GB/T 36630.5-2018 |
Information security technology—Controllability evaluation index for security of information technology products—Part 5: General purpose computer 信息安全技术 信息技术产品安全可控评价指标 第5部分:通用计算机 |
China National Standards General purpose |
English PDF |
GB/T 197-2018 |
General purpose metric screw threads—Tolerances 普通螺纹 公差 |
China National Standards General purpose |
English PDF |
GB/T 35852-2018 |
Dimensions and characteristics of conductors for General purpose aircraft electrical cables and aerospace applications 飞机通用电缆和航空航天应用的导体尺寸和特性 |
China National Standards General purpose |
English PDF |
GB/T 34560.2-2017 |
Structural steels—Part 2: Technical delivery conditions for structural steels for General purposes 结构钢 第2部分:一般用途结构钢交货技术条件 |
China National Standards General purpose |
English PDF |
GB/T 18685-2017 |
The blank diameters for rolling General purpose metric screw threads 普通螺纹搓制和滚制前的毛坯直径 |
China National Standards General purpose |
English PDF |
GB/T 24816-2017 |
Round steel short link chains for general lifting purposes—Grade 8,medium to lerance sling chains for chain slings 一般起重用钢制短环链 吊链用8级中等精度链条 |
China National Standards General purpose |
English PDF |
GB/T 17465.5-2017 |
Appliance couplers for household and similar General purposes—Part 2-1: Sewing machine couplers 家用和类似用途器具耦合器 第2-1部分:缝纫机耦合器 |
China National Standards General purpose |
English PDF |
GB/T 35147-2017 |
Petroleum and natural gas industries—Flexible couplings for mechanical power transmission—General-purpose applications 石油天然气工业 机械动力传输挠性联轴器 一般用途 |
China National Standards General purpose |
English PDF |
GB/T 20118-2017 |
Steel wire ropes for General purposes 钢丝绳通用技术条件 |
China National Standards General purpose |
English PDF |
GB/T 33402-2016 |
Silicone rubber compound—General purpose 硅橡胶混炼胶 一般用途 |
China National Standards General purpose |
English PDF |
GB/T 20111.2-2016 |
Electrical insulation systems—Procedures for thermal evaluation—Part2 : Specific requiremente for general-purpose madels—Wire-wound applications 电气绝缘系统 热评定规程 第2部分:通用模型的特殊要求 散绕绕组应用 |
China National Standards General purpose |
English PDF |
GB/T 31463.1-2015 |
Devices for the connection of luminaires for household and similar purposes—Part 1: General requirements 家用和类似用途灯具的连接装置 第1部分:通用要求 |
China National Standards General purpose |
English PDF |
GB/T 12626.7-2015 |
Hard fibreboard—Part 7:General purpose boards for use in exterior conditions 湿法硬质纤维板 第7部分:室外条件下使用的普通用板 |
China National Standards General purpose |
English PDF |
GB/T 12626.6-2015 |
Hard fibreboard—Part 6: General purpose boards for use in high-humid conditions 湿法硬质纤维板 第6部分:高湿条件下使用的普通用板 |
China National Standards General purpose |
English PDF |
GB/T 12626.5-2015 |
Hard fibreboard—Part 5:General purpose boards for use in humid conditions 湿法硬质纤维板 第5部分:潮湿条件下使用的普通用板 |
China National Standards General purpose |
English PDF |
GB/T 12626.4-2015 |
Hard fibreboard—Part 4: General purpose boards for use in dry conditions 湿法硬质纤维板 第4部分:干燥条件下使用的普通用板 |
China National Standards General purpose |
English PDF |
GB 17465.4-2015 |
Appliance couplers for household and similar General purposes—Part 2-4: Couplers dependent on appliance weight for engagement 家用和类似用途器具耦合器 第2-4部分:靠器具重量啮合的耦合器 |
China National Standards General purpose |
English PDF |
GB/T 18595-2014 |
Equipment for general lighting purposes-EMC immunity requirements 一般照明用设备电磁兼容抗扰度要求 |
China National Standards General purpose |
English PDF |
GB/T 19639.2-2014 |
General purpose valve-regulated lead-acid batteries―Part 2: Kinds of products and specifications 通用阀控式铅酸蓄电池 第2部分:规格型号 |
China National Standards General purpose |
English PDF |
GB/T 19639.1-2014 |
General purpose valve-regulated lead-acid batteries―Part 1: Technical conditions 通用阀控式铅酸蓄电池 第1部分:技术条件 |
China National Standards General purpose |
English PDF |
GB/T 4996-2014 |
General-purpose flat pallets for through transit of goods—Test methods 联运通用平托盘 试验方法 |
China National Standards General purpose |
English PDF |
GB/T 4995-2014 |
General-purpose flat pallets for through transit of goods―Performance requirements and selection of tests 联运通用平托盘 性能要求和试验选择 |
China National Standards General purpose |
English PDF |
GB/T 31148-2014 |
General-purpose flat pallets for through transit of goods―Wooden flat pallet 联运通用平托盘 木质平托盘 |
China National Standards General purpose |
English PDF |
GB/T 11918.1-2014 |
Plugs,socket-outlets and couplers for industrial purposes―Part 1: General ruquirements 工业用插头插座和耦合器 第1部分:通用要求 |
China National Standards General purpose |
English PDF |
GB/T 14408-2014 |
Low alloy steel castings for general engineering and structural purposes 一般工程与结构用低合金钢铸件 |
China National Standards General purpose |
English PDF |
GB/T 5671-2014 |
General purpose lithium lubricating grease for automobile 汽车通用锂基润滑脂 |
China National Standards General purpose |
English PDF |
GB 29922-2013 |
National Food Safety Standard-General Principles for the Formula Foods for Special Medical Purpose 食品安全国家标准 特殊医学用途配方食品通则 |
China National Standards General purpose |
English PDF |
GB/T 29627.1-2013 |
Aramid pressboard for electrical purposes - Part 1: Definitions, designations and general requirements 电气用聚芳酰胺纤维纸板 第1部分:定义、名称及一般要求 |
China National Standards General purpose |
English PDF |
GB/T 1414-2013 |
General purpose metric screw threads - The plan for pipe systems 普通螺纹 管路系列 |
China National Standards General purpose |
English PDF |
GB/T 28573-2012 |
Petroleum, petrochemical and natural gas industries steam turbines - General-purpose applications 石油、石化和天然气工业 一般用途汽轮机 |
China National Standards General purpose |
English PDF |
GB/T 27797.10-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens 纤维增强塑料 试验板制备方法 第10部分:BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑 |
China National Standards General purpose |
English PDF |
GB/T 27696-2011 |
Forged steel eyebolts grade 4 for general lifting purposes 一般起重用4级锻造吊环螺栓 |
China National Standards General purpose |
English PDF |
GB/T 20633.3-2011 |
Coatings for loaded printed wire boards (conformal coatings) - Part 3:Coatings for General purpose (Class 1), high reliability (Class 2) and aerospace(Class 3) 承载印制电路板用涂料(敷形涂料) 第3部分:一般用(1级)、高可靠性用(2级)和航空航天用(3级)涂料 |
China National Standards General purpose |
English PDF |
GB/T 19264.1-2011 |
Pressboard and presspaper for electrical purposes - Part 1: Definitions and general requirements 电气用压纸板和薄纸板 第1部分:定义和一般要求 |
China National Standards General purpose |
English PDF |
GB 50055-2011 |
Code for design of electric distribution of general-purpose utilization equipment 通用用电设备配电设计规范 |
China National Standards General purpose |
English PDF |
GB/T 14406-2011 |
Gantry crane for General purpose 通用门式起重机 |
China National Standards General purpose |
English PDF |
GB/T 14405-2011 |
Bridge crane for General purpose 通用桥式起重机 |
China National Standards General purpose |
English PDF |
GB/T 17793-2010 |
Wrought copper and copper alloy plate,sheet and strip for General purposes - Dimensions and tolerances 加工铜及铜合金板带材 外形尺寸及允许偏差 |
China National Standards General purpose |
English PDF |
GB/T 25854-2010 |
Forged shackles for general lifting purposes - Dee shackles and bow shackles 一般起重用D形和弓形锻造卸扣 |
China National Standards General purpose |
English PDF |
GB/T 7324-2010 |
General purpose lithium lubricating grease 通用锂基润滑脂 |
China National Standards General purpose |
English PDF |
GB/T 16762-2009 |
Wire rope slings for General purposes-characteristics and technical requirements 一般用途钢丝绳吊索特性和技术条件 |
China National Standards General purpose |
English PDF |
GB/T 7233.1-2009 |
Steel castings - Ultrasonic examination - Part 1: Steel castings for General purposes 铸钢件 超声检测 第1部分:一般用途铸钢件 |
China National Standards General purpose |
English PDF |
GB 17465.4-2009 |
Appliance couplers for household and similar General purposes - Part 2: Couplers dependent on appliance weight for engagement 家用和类似用途器具耦合器 第2部分:靠器具重量啮合的耦合器 |
China National Standards General purpose |
English PDF |
GB 17465.2-2009 |
Appliance couplers for household and similar General purposes - Part 2: Interconnection couplers for household and similar equipment 家用和类似用途器具耦合器 第2部分:家用和类似设备用互连耦合器 |
China National Standards General purpose |
English PDF |
GB 17465.1-2009 |
Appliances couplers for household and similar General purposes - Part 1: General requirements 家用和类似用途器具耦合器 第1部分:通用要求 |
China National Standards General purpose |
English PDF |
GB/T 10681-2009 |
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements 家庭和类似场合普通照明用钨丝灯 性能要求 |
China National Standards General purpose |
English PDF |
GB/T 24242.2-2009 |
Non-alloy steel wire rods for conversion to wire - Part 2: Specific requirements for General purpose wire rod 制丝用非合金钢盘条 第2部分:一般用途盘条 |
China National Standards General purpose |
English PDF |
GB/T 5132.1-2009 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: General requirements 电气用热固性树脂工业硬质圆形层压管和棒 第1部分:一般要求 |
China National Standards General purpose |
English PDF |
GB/T 1303.1-2009 |
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements 电气用热固性树脂工业硬质层压板 第1部分:定义、分类和一般要求 |
China National Standards General purpose |
English PDF |
GB/T 5584.1-2009 |
Rectangular copper or aluminium and its alloy wires for electrical purposes - Part 1: General 电工用铜、铝及其合金扁线 第1部分:一般规定 |
China National Standards General purpose |
English PDF |
GB/T 12970.1-2009 |
Flexible copper stranded conductors for electrical purposes - Part 1: General requirements 电工软铜绞线 第1部分:一般规定 |
China National Standards General purpose |
English PDF |
GB/T 11352-2009 |
Carbon steel castings for general engineering purpose 一般工程用铸造碳钢件 |
China National Standards General purpose |
English PDF |
GB 7000.204-2008 |
Luminaires - Part 2-4: Particular requirements - Portable General purpose luminaires 灯具 第2-4部分:特殊要求 可移式通用灯具 |
China National Standards General purpose |
English PDF |
GB 7000.201-2008 |
Luminaires - Part 2-1: Particular requirements - Fixed General purpose luminaires 灯具 第2-1部分:特殊要求 固定式通用灯具 |
China National Standards General purpose |
English PDF |
GB 14196.2-2008 |
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes 白炽灯安全要求 第2部分:家庭和类似场合普通照明用卤钨灯 |
China National Standards General purpose |
English PDF |
GB 14196.1-2008 |
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes 白炽灯安全要求 第1部分:家庭和类似场合普通照明用钨丝灯 |
China National Standards General purpose |
English PDF |
GB 17465.3-2008 |
Appliance couplers for household and similar General purposes - Part 2: Appliance couplers with a degree of protection higher than IPX0 家用和类似用途器具耦合器 第2部分:防护等级高于IPX0的器具耦合器 |
China National Standards General purpose |
English PDF |
GB 13140.1-2008 |
Connecting devices for low-voltage circuits for household and similar purposes - Part l: General requirements 家用和类似用途低压电路用的连接器件 第1部分:通用要求 |
China National Standards General purpose |
English PDF |
GB/T 20111.2-2008 |
Electrical insulation systems - Procedures for thermal evaluation - Part 2: Specific requirements for general-purpose models - Wire-wound applications 电气绝缘系统 热评定规程 第2部分:通用模型的特殊要求 散绕绕组应用 |
China National Standards General purpose |
English PDF |
GB/T 22470-2008 |
General requirements for environmentally friendly moulding compounds for electrical purpose 电气用环保型模塑料通用要求 |
China National Standards General purpose |
English PDF |
GB 2099.1-2008 |
Plugs and socket-outlets for household and similar purposes - Part 1: General requirements 家用和类似用途插头插座 第1部分:通用要求 |
China National Standards General purpose |
English PDF |
GB/T 22378-2008 |
Pressure sensitive adhesives tapes of BOPP for General purpose 通用型双向拉伸聚丙烯膜压敏胶粘带 |
China National Standards General purpose |
English PDF |
GB/T 15756-2008 |
General purpose metric screw threads - Limits of sizes 普通螺纹 极限尺寸 |
China National Standards General purpose |
English PDF |
GB/T 12972.1-2008 |
Flexible rubber-sheathed cables for mining purposes - Part 1:General requirements 矿用橡套软电缆 第1部分: 一般规定 |
China National Standards General purpose |
English PDF |
GB/T 15568-2008 |
Sheet molding compound(SMC) for General purposes 通用型片状模塑料(SMC) |
China National Standards General purpose |
English PDF |
GB/T 5862-2008 |
Agricultural tractors and machinery - General purpose quick-action hydraulic couplers 农业拖拉机和机具 通用液压快换接头 |
China National Standards General purpose |
English PDF |
GB/T 21784.2-2008 |
Laboratory glassware-hydrometer for General purpose - Part 2: Test methods and use 实验室玻璃器皿 通用型密度计 第2部分:试验方法和使用 |
China National Standards General purpose |
English PDF |
GB/T 21217.1-2007 |
Corrugated pressboard and presspaper for electrical purposes - Part 1: Definitions designations and general requirements 电气用波纹纸板和薄纸板 第1部分:定义、命名及一般要求 |
China National Standards General purpose |
English PDF |
GB/T 2934-2007 |
General-purpose flat pallets for through transit of goods - Principal dimensions and tolerances 联运通用平托盘 主要尺寸及公差 |
China National Standards General purpose |
English PDF |
GB/T 20946-2007 |
short link chain for lifting purposes - General conditions of acceptance 起重用短环链 验收总则 |
China National Standards General purpose |
English PDF |
GB/T 12233-2006 |
General purpose industrial valves - Casting iron globe valves and lift check valves 通用阀门 铁制截止阀与升降式止回阀 |
China National Standards General purpose |
English PDF |
GB/T 12228-2006 |
General purpose industrial valves - Specification of carbon steel forgings 通用阀门 碳素钢锻件技术条件 |
China National Standards General purpose |
English PDF |
GB/T 20634.1-2006 |
Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions,designation and general requirements 电气用非浸渍致密层压木 第1部分:定义、命名和一般要求 |
China National Standards General purpose |
English PDF |
GB/T 20632.1-2006 |
Specification for vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements 电气用刚纸 第1部分:定义和一般要求 |
China National Standards General purpose |
English PDF |
GB/T 20631.1-2006 |
Pressure sensitive adhesive tapes for electrical purposes - Part 1: General requirements 电气用压敏胶粘带 第1部分:一般要求 |
China National Standards General purpose |
English PDF |
GB/T 20629.1-2006 |
Non-cellulosic paper for electrical purposes - Part 1: Definitions and general requirements 电气用非纤维素纸 第1部分:定义和一般要求 |
China National Standards General purpose |
English PDF |
GB/T 20628.1-2006 |
Specification for cellulosic papers for electrical purposes - Part 1: Definitions and general requirements 电气用纤维素纸 第1部分:定义和一般要求 |
China National Standards General purpose |
English PDF |
GB/T 1310.1-2006 |
Varnished fabrics for electrical purposes - Part 1: Definitions and general requirements 电气用浸渍织物 第1部分:定义和一般要求 |
China National Standards General purpose |
English PDF |
GB/T 5761-2006 |
Suspension polyvinyl chloride resins of General purpose 悬浮法通用聚氯乙烯树脂 |
China National Standards General purpose |
English PDF |
GB/T 5974.1-2006 |
General purpose thimbles for use with steel wire ropes 钢丝绳用普通套环 |
China National Standards General purpose |
English PDF |
GB/T 20118-2006 |
Steel wire ropes for General purpose 一般用途钢丝绳 |
China National Standards General purpose |
English PDF |
GB/T 12225-2005 |
General purpose industrial valves-Specification of copper alloy castings 通用阀门 铜合金铸件技术条件 |
China National Standards General purpose |
English PDF |
GB/T 12232-2005 |
General purpose industrial valves Flanged iron gate valves 通用阀门 法兰连接铁制闸阀 |
China National Standards General purpose |
English PDF |
GB/T 12230-2005 |
General purpose industrial valves-Specification of stainless steel castings 通用阀门 不锈钢铸件技术条件 |
China National Standards General purpose |
English PDF |
GB/T 12229-2005 |
General purpose industrial valves-Specification of carbon steel castings 通用阀门 碳素钢铸件技术条件 |
China National Standards General purpose |
English PDF |
GB/T 12227-2005 |
General purpose industrial valve-Specification of spheroidal graphite iron castings 通用阀门 球墨铸铁件技术条件 |
China National Standards General purpose |
English PDF |
GB/T 12226-2005 |
General purpose industrial valve-Specification of flake graphite iron castings 通用阀门 灰铸铁件技术条件 |
China National Standards General purpose |
English PDF |
GB/T 3934-2003 |
Specification of gauges for General purpose screw threads 普通螺纹量规 技术条件 |
China National Standards General purpose |
English PDF |
GB/T 9146-2003 |
General purpose metric screw threads--Limits of sizes for the screw threads of coarse quality and preferable plan 普通螺纹 粗糙精度、优选系列的极限尺寸 |
China National Standards General purpose |
English PDF |
GB/T 9145-2003 |
General purpose metric screw threads--Limits of sizes for the screw threads of medium quality and preferable plan 普通螺纹 中等精度、优选系列的极限尺寸 |
China National Standards General purpose |
English PDF |
GB/T 9144-2003 |
General purpose metric screw threads--Preferable plan 普通螺纹 优选系列 |
China National Standards General purpose |
English PDF |
GB/T 2516-2003 |
General purpose metric screw threads--Limit deviations 普通螺纹 极限偏差 |
China National Standards General purpose |
English PDF |
GB/T 197-2003 |
General purpose metric screw threads--Tolerances 普通螺纹 公差 |
China National Standards General purpose |
English PDF |
GB/T 196-2003 |
General purpose metric screw threads--Basic dimensions 普通螺纹 基本尺寸 |
China National Standards General purpose |
English PDF |
GB/T 193-2003 |
General purpose metric screw threads--Generalplan 普通螺纹 直径与螺距系列 |
China National Standards General purpose |
English PDF |
GB/T 192-2003 |
General purpose metric screw threads--Basic profile 普通螺纹 基本牙型 |
China National Standards General purpose |
English PDF |
GB/T 3105-2002 |
General purpose bolts and screws--Radii under the head 普通螺栓和螺钉 头下圆角半径 |
China National Standards General purpose |
English PDF |
GB/T 18685-2002 |
The bar diameters for rolling General purpose metric screw threads 搓、滚制普通螺纹前的毛坯直径 |
China National Standards General purpose |
English PDF |
GB/T 5338-2002 |
Series 1 freight containers--Specification and testing--Part 1:General cargo containers for General purposes 系列1集装箱 技术要求和试验方法 第1部分:通用集装箱 |
China National Standards General purpose |
English PDF |
GB/T 12418-2001 |
The technical requirements of repairs for steel General purpose containers 钢质通用集装箱修理技术要求 |
China National Standards General purpose |
English PDF |
GB/T 18272.1-2000 |
Industrial-process measurement and control--Evaluation of system properties for the purpose of system assessment--Part 1:General consideration and methodology 工业过程测量和控制 系统评估中系统特性的评定 第1部分:总则和方法学 |
China National Standards General purpose |
English PDF |
GB/T 17770-1999 |
Freight containers--Air/surface (intermodal) General purpose containers--Specification and tests 集装箱 空/陆/水(联运)通用集装箱技术要求和试验方法 |
China National Standards General purpose |
English PDF |
GB/T 17037.1-1997 |
Injection moulding of test specimens of thermoplastic materials--Part 1:General principles and moulding of multipurpose and bar test specimens 热塑性塑料材料注塑试样的制备 第1部分:一般原理及多用途试样和长条试样的制备 |
China National Standards General purpose |
English PDF |
GB/T 3-1997 |
Run-outs,undercuts and chamfers forGeneral purpose metric screw threads 普通螺纹收尾、肩距、退刀槽和倒角 |
China National Standards General purpose |
English PDF |
GB/T 4020-1997 |
Acceptance conditions for General purpose parallellathes--Testing of the accuracy 卧式车床 精度检验 |
China National Standards General purpose |
English PDF |
GB/T 14598.6-1993 |
Electrical relays--Part 18:Dimensions for General purpose all-or-nothing relays 电气继电器 第十八部分:有或无通用继电器的尺寸 |
China National Standards General purpose |
English PDF |
GB/T 13932-1992 |
General purpose industrial valves--Cast iron swing check valves 通用阀门铁制旋启式止回阀 |
China National Standards General purpose |
English PDF |
GB/T 12630-1990 |
Thin epoxide woven glass fabric copper-clad laminated sheet, General purpose grade, for use in the fabrication of multilayer printed boards 一般用途的薄覆铜箔环氧玻璃布层压板 (制造多层印制板用) |
China National Standards General purpose |
English PDF |
GB/T 12057-1989 |
General purpose 37-position and 9-position interface for data terminal equipment and data circuit-terminating equipment employing serial binary data interchange 使用串行二进制数据交换的数据终端设备和数据电路终接设备之间的通用37插针和9 插针接口 |
China National Standards General purpose |
English PDF |
GB/T 9718-1988 |
Information processing--General purpose reels with 8mm centre hole for magnetic tape for interchange instrumentation applications 信息处理 互换计测磁带用 8mm中心孔通用带盘 |
China National Standards General purpose |
English PDF |
GB/T 9714-1988 |
Information processing--General purpose hubs and reels with 76mm centre hole for magnetic tape usedin interchange instrumentation applications 信息处理 互换计测磁带用的76mm中心孔通用带盘和盘芯 |
China National Standards General purpose |
English PDF |
GB/T 9543-1988 |
Programming languages PL/1 General purpose subset 程序设计语言 PL/1通用子集 |
China National Standards General purpose |
English PDF |
GB/T 6643-1986 |
General purpose rigid coaxial transmission lines and their associated flange connectors--Generic specification 通用硬同轴传输线及其法兰连接器总规范 |
China National Standards General purpose |
English PDF |
GB/T 3106-1982 |
Bolts,screws and studs--Nominal lengths,and thread lengths for General purpose bolts 螺栓、螺钉和螺柱的公称长度和普通螺栓的螺纹长度 |
China National Standards General purpose |
English PDF |
Find out:138Items | To Page of: First -Previous-Next -Last | 1 |