Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 18779.2-2023 |
Geometrical Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 2: Guidance for the Evaluation of Measurement Uncertainty in GPS Measurements, Measurement Equipment Calibration, and Product Verification {译} 产品几何技术规范(GPS) 工件与测量设备的测量检验 第2部分：GPS测量、测量设备校准和产品验证中的测量不确定度评估指南 |
China National Standards Geometrical |
 English PDF |
| GB/T 39741.2-2021 |
Plain bearings—Tolerances—Part 2：Tolerances on Geometrical characteristics and surface roughness for shafts and thrust collars 滑动轴承 公差 第2部分：轴和止推轴肩的几何公差及表面粗糙度 |
China National Standards Geometrical |
English PDF |
| GB/T 6445-2021 |
Rolling bearings—Needle roller bearing track rollers—Boundary dimensions, Geometrical product specifications (GPS) and tolerance values 滚动轴承 滚轮滚针轴承 外形尺寸、产品几何技术规范（GPS）和公差值 |
China National Standards Geometrical |
English PDF |
| GB/T 20882.4-2021 |
Rolling bearings—Needle roller bearing track rollers—Boundary dimensions, Geometrical product specifications (GPS) and tolerance values 淀粉糖质量要求 第4部分：果葡糖浆 |
China National Standards Geometrical |
English PDF |
| GB/T 40742.5-2021 |
Geometrical product specifications (GPS)—Geometrical precisionverification—Part 5:Estimation of uncertainty of measurement for geometrical characteristics verification 产品几何技术规范（GPS） 几何精度的检测与验证 第5部分:几何特征检测与验证中测量不确定度的评估 |
China National Standards Geometrical |
English PDF |
| GB/T 40810.2-2021 |
Geometrical product specifications (GPS)—Online measurement in process—Part 2：Online verifications of geometric features（form and position） 产品几何技术规范（GPS） 生产过程在线测量 第2部分：几何特征（形位）的在线检测与验证 |
China National Standards Geometrical |
English PDF |
| GB/T 40810.1-2021 |
Geometrical product specifications (GPS)—Online measurement in process—Part 1:Online verification of geometric features (size and surface texture) 产品几何技术规范（GPS） 生产过程在线测量 第1部分：几何特征（尺寸、表面结构）的在线检测与验证 |
China National Standards Geometrical |
English PDF |
| GB/T 40742.4-2021 |
Geometrical product specifications (GPS)—Geometrical precision verification—Part 4：Evaluation of dimension and geometrical error，discriminant pattern of minimum zone 产品几何技术规范（GPS） 几何精度的检测与验证 第4部分：尺寸和几何误差评定、最小区域的判别模式 |
China National Standards Geometrical |
English PDF |
| GB/T 40742.3-2021 |
Geometrical product specifications (GPS)—Geometrical precision verification—Part 3:Functional gauges and fixtures—Verification when applying maximum material requirements and minimum material requirements 产品几何技术规范（GPS） 几何精度的检测与验证 第3部分：功能量规与夹具 应用最大实体要求和最小实体要求时的检测与验证 |
China National Standards Geometrical |
English PDF |
| GB/T 40742.2-2021 |
Geometrical product specifications (GPS)—Geometrical precision verification—Part 2：Verification of form characteristics, orientation characteristics, position characteristics, run-out characteristics and profile characteristics 产品几何技术规范（GPS） 几何精度的检测与验证 第2部分：形状、方向、位置、跳动和轮廓度特征的检测与验证 |
China National Standards Geometrical |
English PDF |
| GB/T 40742.1-2021 |
Geometrical product specifications (GPS)—Geometrical precision verification—Part 1:Basic concept and measurement—Symbol,terminology,measuring conditions and procedures 产品几何技术规范（GPS） 几何精度的检测与验证 第1部分：基本概念和测量基础 符号、术语、测量条件和程序 |
China National Standards Geometrical |
English PDF |
| GB/T 39518-2020 |
Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems 产品几何技术规范（GPS） 使用单探针和多探针接触式探测系统坐标测量机的检测不确定度评估指南 |
China National Standards Geometrical |
English PDF |
| GB/T 38761-2020 |
Geometrical product specifications (GPS)—Characteristics and conditions—Definitions 产品几何技术规范（GPS） 特征和条件 定义 |
China National Standards Geometrical |
English PDF |
| GB/T 38762.3-2020 |
Geometrical product specifications (GPS)—Dimensional tolerancing—Part 3: Angular sizes 产品几何技术规范（GPS） 尺寸公差 第3部分：角度尺寸 |
China National Standards Geometrical |
English PDF |
| GB/T 38762.1-2020 |
Geometrical product specifications (GPS)—Dimensional tolerancing—Part 1: Linear sizes 产品几何技术规范（GPS） 尺寸公差 第1部分：线性尺寸 |
China National Standards Geometrical |
English PDF |
| GB/T 38762.2-2020 |
Geometrical product specifications (GPS)—Dimensional tolerancing—Part 2: Dimensions other than linear or angular sizes 产品几何技术规范（GPS） 尺寸公差 第2部分：除线性、角度尺寸外的尺寸 |
China National Standards Geometrical |
English PDF |
| GB/T 38760-2020 |
Geometrical product specifications (GPS)—Features utilized in specification and verification 产品几何技术规范（GPS） 规范和检验中使用的要素 |
China National Standards Geometrical |
English PDF |
| GB/T 34874.6-2020 |
Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 6: Testing method of workpieces 产品几何技术规范（GPS） X射线三维尺寸测量机 第6部分：工件的检测方法 |
China National Standards Geometrical |
English PDF |
| GB/T 24637.4-2020 |
Geometrical product specifications(GPS)—General concepts—Part 4: Geometrical characteristics for quantifying GPS deviations 产品几何技术规范（GPS） 通用概念 第4部分:几何特征的GPS偏差量化 |
China National Standards Geometrical |
English PDF |
| GB/T 24637.3-2020 |
Geometrical product specifications (GPS)—General concepts—Part 3: Toleranced features
产品几何技术规范（GPS） 通用概念 第3部分：被测要素 |
China National Standards Geometrical |
English PDF |
| GB/T 24637.2-2020 |
Geometrical product specifications (GPS)—General concepts—Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities 产品几何技术规范（GPS） 通用概念 第2部分：基本原则、规范、操作集和不确定度 |
China National Standards Geometrical |
English PDF |
| GB/T 24637.1-2020 |
Geometrical product specifications (GPS)—General concepts—Part 1: Model for geometrical specification and verification 产品几何技术规范（GPS） 通用概念 第1部分：几何规范和检验的模型 |
China National Standards Geometrical |
English PDF |
| GB/T 20308-2020 |
Geometrical product specifications(GPS)—Matrix model 产品几何技术规范（GPS） 矩阵模型 |
China National Standards Geometrical |
English PDF |
| GB/T 13319-2020 |
Geometrical product specifications (GPS)—Geometrical tolerancing—Pattern and combined geometrical specification 产品几何技术规范（GPS） 几何公差 成组（要素）与组合几何规范 |
China National Standards Geometrical |
English PDF |
| GB/T 1800.2-2020 |
Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts 产品几何技术规范（GPS） 线性尺寸公差ISO代号体系 第2部分：标准公差带代号和孔、轴的极限偏差表 |
China National Standards Geometrical |
English PDF |
| GB/T 1800.1-2020 |
Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 1: Basis of tolerances, deviations and fits 产品几何技术规范（GPS） 线性尺寸公差ISO代号体系 第1部分：公差、偏差和配合的基础 |
China National Standards Geometrical |
English PDF |
| GB/T 16857.901-2020 |
Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 901: CMMs with multiple imaging probing system 产品几何技术规范（GPS） 坐标测量机的验收检测和复检检测 第901部分：配置多影像探测系统的坐标测量机 |
China National Standards Geometrical |
English PDF |
| GB/T 39643-2020 |
Geometrical product specifications (GPS)—Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences 产品几何技术规范（GPS） 长度测量中温度影响引入的系统误差和测量不确定度来源 |
China National Standards Geometrical |
English PDF |
| GB/T 33523.71-2020 |
Geometrical product specifications (GPS)—Surface texture: Areal—Part 71: Software measurement standards 产品几何技术规范（GPS） 表面结构 区域法 第71部分：软件测量标准 |
China National Standards Geometrical |
English PDF |
| GB/T 33523.70-2020 |
Geometrical product specifications (GPS)—Surface texture: Areal—Part 70: Material measures 产品几何技术规范（GPS） 表面结构 区域法 第70部分：实物测量标准 |
China National Standards Geometrical |
English PDF |
| GB/T 33523.1-2020 |
Geometrical product specifications (GPS)—Surface texture: Areal—Part 1: Indication of surface texture 产品几何技术规范（GPS） 表面结构 区域法 第1部分：表面结构的表示法 |
China National Standards Geometrical |
English PDF |
| GB/T 18779.6-2020 |
Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces 产品几何技术规范（GPS） 工件与测量设备的测量检验 第6部分：仪器和工件接受/拒收的通用判定规则 |
China National Standards Geometrical |
English PDF |
| GB/T 18779.5-2020 |
Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments 产品几何技术规范（GPS） 工件与测量设备的测量检验 第5部分：指示式测量仪器的检验不确定度 |
China National Standards Geometrical |
English PDF |
| GB/T 18779.4-2020 |
Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 4: Background on functional limits and specification limits in decision rules 产品几何技术规范（GPS） 工件与测量设备的测量检验 第4部分：判定规则中功能限与规范限的基础 |
China National Standards Geometrical |
English PDF |
| GB/T 26958.28-2020 |
Geometrical product specifications (GPS)—Filtration—Part 28: Profile filters：End effects 产品几何技术规范（GPS） 滤波 第28部分: 轮廓滤波器 端部效应 |
China National Standards Geometrical |
English PDF |
| GB/T 26958.21-2020 |
Geometrical product specifications (GPS)—Filtration—Part 21: Linear profile filters: Gaussian filters 产品几何技术规范（GPS） 滤波 第21部分：线性轮廓滤波器 高斯滤波器 |
China National Standards Geometrical |
English PDF |
| GB/T 24635.4-2020 |
Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 4: Evaluating task-specific measurement uncertainty using simulation 产品几何技术规范（GPS） 坐标测量机（CMM） 确定测量不确定度的技术 第4部分：应用仿真技术评估特定任务的测量不确定度 |
China National Standards Geometrical |
English PDF |
| GB/T 24635.1-2020 |
Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 1: Overview and metrological characteristics 产品几何技术规范（GPS） 坐标测量机（CMM） 确定测量不确定度的技术 第1部分：概要和计量特性 |
China National Standards Geometrical |
English PDF |
| GB/T 39645-2020 |
Technical drawings—Symbols for Geometrical tolerancing proportions and dimensions 技术制图 几何公差符号的比例和尺寸 |
China National Standards Geometrical |
English PDF |
| GB/T 5801-2020 |
Rolling bearings—Needle roller bearings with machined rings—Boundary dimensions, Geometrical product specifications (GPS) and tolerance values 滚动轴承 机制套圈滚针轴承 外形尺寸、产品几何技术规范（GPS）和公差值 |
China National Standards Geometrical |
English PDF |
| GB/T 38368-2019 |
Geometrical product specifications (GPS)—Requirements of digital model-based measurement 产品几何技术规范（GPS） 基于数字化模型的测量通用要求 |
China National Standards Geometrical |
English PDF |
| GB/T 4249-2018 |
Geometrical product specifications(GPS)—Fundamentals—Concepts, principles and rules 产品几何技术规范（GPS） 基础 概念、原则和规则 |
China National Standards Geometrical |
English PDF |
| GB/T 17852-2018 |
Geometrical product specifications(GPS)—Geometrical tolerancing—Profile tolerancing 产品几何技术规范（GPS） 几何公差 轮廓度公差标注 |
China National Standards Geometrical |
English PDF |
| GB/T 16671-2018 |
Geometrical product specifications (GPS)—Geometrical tolerancing—Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) 产品几何技术规范（GPS） 几何公差 最大实体要求（MMR）、最小实体要求（LMR）和可逆要求（RPR） |
China National Standards Geometrical |
English PDF |
| GB/T 1182-2018 |
Geometrical product specifications(GPS)—Geometrical tolerancing—Tolerances of form, orientation, location and run-out 产品几何技术规范（GPS） 几何公差 形状、方向、位置和跳动公差标注 |
China National Standards Geometrical |
English PDF |
| GB/T 34874.3-2017 |
Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 3：Acceptance and reverification tests 产品几何技术规范（GPS） X射线三维尺寸测量机 第3部分：验收检测和复检检测 |
China National Standards Geometrical |
English PDF |
| GB/T 16857.2-2017 |
Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 2: CMMs used for measuring linear dimensions 产品几何技术规范（GPS) 坐标测量机的验收检测和复检检测 第2部分: 用于测量线性尺寸的坐标测量机 |
China National Standards Geometrical |
English PDF |
| GB/T 34879-2017 |
Geometrical product specifications (GPS)—Metrological characteristics and guide to uncertainty of measurement for optical confocal microscopes 产品几何技术规范（GPS） 光学共焦显微镜计量特性及测量不确定度评定导则 |
China National Standards Geometrical |
English PDF |
| GB/T 1958-2017 |
Geometrical Product Specifications(GPS)—Geometrical tolerance—Verification 产品几何技术规范（GPS) 几何公差 检测与验证 |
China National Standards Geometrical |
English PDF |
| GB/T 34881-2017 |
Geometrical product specifications (GPS)—Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty 产品几何技术规范（GPS） 坐标测量机的检测不确定度评估指南 |
China National Standards Geometrical |
English PDF |
| GB/T 34890-2017 |
Geometrical product specification（GPS）—Acceptance and reverification tests for digital photogrammetry 3D coordinate measuring system 产品几何技术规范（GPS） 数字摄影三坐标测量系统的验收检测和复检检测 |
China National Standards Geometrical |
English PDF |
| GB/T 307.1-2017 |
Rolling bearings—Radial bearings—Geometrical product specifications (GPS) and tolerance values 滚动轴承 向心轴承 产品几何技术规范（GPS）和公差值 |
China National Standards Geometrical |
English PDF |
| GB/T 33523.2-2017 |
Geometrical product specifications (GPS)—Surface texture:Areal—Part 2: Terms, definitions and surface texture parameters 产品几何技术规范（GPS） 表面结构 区域法 第2部分：术语、定义及表面结构参数 |
China National Standards Geometrical |
English PDF |
| GB/T 307.4-2017 |
Rolling bearings—Thrust bearings—Geometrical product specifications (GPS) and tolerance values 滚动轴承 推力轴承 产品几何技术规范（GPS）和公差值 |
China National Standards Geometrical |
English PDF |
| GB/T 16857.5-2017 |
Geometrical product specifications(GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 5:CMMs using single or multiple stylus contacting probing systems 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第5部分：使用单探针或多探针接触式探测系统的坐标测量机 |
China National Standards Geometrical |
English PDF |
| GB/T 34634-2017 |
Geometrical product specifications (GPS)—Measurement of linear sizes (500 mm-10000 mm) of plain workpiece—Choice of measuring instrument 产品几何技术规范(GPS) 光滑工件尺寸(500mm～10000mm)测量 计量器具选择 |
China National Standards Geometrical |
English PDF |
| GB/Z 26958.30-2017 |
Geometrical product specifications (GPS)—Filtration—Part 30: Robust profile filters—Basic concept 产品几何技术规范(GPS) 滤波 第30部分：稳健轮廓滤波器 基本概念 |
China National Standards Geometrical |
English PDF |
| GB/T 33523.701-2017 |
Geometrical product specifications (GPS)—Surface texture: Areal— Part 701: Calibration and measurement standards for contact (stylus) instruments 产品几何技术规范(GPS) 表面结构 区域法 第701部分：接触（触针）式仪器的校准与测量标准 |
China National Standards Geometrical |
English PDF |
| GB/T 33523.6-2017 |
Geometrical product Specifications (GPS)—Surface texture: Areal—Part 6: Classification of methods for measuring surface texture 产品几何技术规范(GPS) 表面结构 区域法 第6部分：表面结构测量方法的分类 |
China National Standards Geometrical |
English PDF |
| GB/T 33523.601-2017 |
Geometrical product specifications (GPS)—Surface texture: Areal—Part 601: Nominal characteristics of contact (stylus) instruments 产品几何技术规范(GPS) 表面结构 区域法 第601部分：接触(触针)式仪器的标称特性 |
China National Standards Geometrical |
English PDF |
| GB/T 6414-2017 |
Castings—Dimensional tolerances and Geometrical tolerances and machining allowances 铸件 尺寸公差、几何公差与机械加工余量 |
China National Standards Geometrical |
English PDF |
| GB/T 1224-2016 |
Vocabulary and character for Geometrical optics 几何光学术语、符号 |
China National Standards Geometrical |
English PDF |
| GB/T 7660.1-2013 |
Reflecting prisms―Part 1: Geometrical characteritics 反射棱镜 第1部分：几何特性 |
China National Standards Geometrical |
English PDF |
| GB/T 10107.3-2012 |
Cycloidal drives ― Part 3: Symbols of Geometrical data 摆线针轮行星传动 第3部分：几何要素代号 |
China National Standards Geometrical |
English PDF |
| GB/T 27939-2011 |
Plain bearings - Quality control techniques and inspection of Geometrical and material quality characteristics 滑动轴承 几何和材料质量特性的质量控制技术和检验 |
China National Standards Geometrical |
English PDF |
| GB/Z 26958.49-2011 |
Geometrical Product Specifications (GPS) - Filtration - Part 49: Morphological profile filter: Scale space techniques 产品几何技术规范(GPS) 滤波 第49部分：形态学轮廓滤波器 尺度空间技术 |
China National Standards Geometrical |
English PDF |
| GB/Z 26958.41-2011 |
Geometrical Product Specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal segment filters 产品几何技术规范(GPS) 滤波 第41部分：形态学轮廓滤波器 圆盘和水平线段滤波器 |
China National Standards Geometrical |
English PDF |
| GB/Z 26958.40-2011 |
Geometrical Product Specifications (GPS) - Filtration - Part 40: Morphological profile filter：Basic concepts 产品几何技术规范(GPS) 滤波 第40部分：形态学轮廓滤波器 基本概念 |
China National Standards Geometrical |
English PDF |
| GB/Z 26958.32-2011 |
Geometrical Product Specifications (GPS) - Filtration - Part 32: Robust profile filters：Spline filters 产品几何技术规范(GPS) 滤波 第32部分：稳健轮廓滤波器 样条滤波器 |
China National Standards Geometrical |
English PDF |
| GB/Z 26958.31-2011 |
Geometrical Product Specifications (GPS) - Filtration - Part 31: Robust profile filters - Gaussian regression filters 产品几何技术规范(GPS) 滤波 第31部分：稳健轮廓滤波器 高斯回归滤波器 |
China National Standards Geometrical |
English PDF |
| GB/Z 26958.29-2011 |
Geometrical Product Specifications (GPS) - Filtration - Part 29: Linear profile filters：Spline wavelets 产品几何技术规范(GPS) 滤波 第29部分：线性轮廓滤波器 样条小波 |
China National Standards Geometrical |
English PDF |
| GB/Z 26958.22-2011 |
Geometrical Product Specifications (GPS) - Filtration - Part 22: Linear profile filters : Spline filters 产品几何技术规范(GPS) 滤波 第22部分：线性轮廓滤波器 样条滤波器 |
China National Standards Geometrical |
English PDF |
| GB/Z 26958.20-2011 |
Geometrical Product Specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts 产品几何技术规范(GPS) 滤波 第20部分：线性轮廓滤波器 基本概念 |
China National Standards Geometrical |
English PDF |
| GB/Z 26958.1-2011 |
Geometrical Product Specifications (GPS) - Filtration - Part 1: Overview and basic concepts 产品几何技术规范(GPS）滤波 第1部分：概述和基本概念 |
China National Standards Geometrical |
English PDF |
| GB/T 16656.507-2010 |
Industrial automation systems and integration - Product data representation and exchange - Part 507: Application interpreted construct: Geometrically bounded surfacee 工业自动化系统与集成 产品数据表达与交换 第507部分：应用解释构造：几何有界曲面 |
China National Standards Geometrical |
English PDF |
| GB/Z 24636.5-2010 |
Geometrical product specifications(GPS) - Statistical tolerance - Part 5: Statistical quality indices of an assembly lot (hole/shaft fits) 产品几何技术规范（GPS） 统计公差 第5部分：装配批（孔、轴配合）的统计质量指标 |
China National Standards Geometrical |
English PDF |
| GB/T 26113-2010 |
Micro-electromechanical system technology - General rules for the assessment of micro-Geometrical parameters 微机电系统（MEMS）技术 微几何量评定总则 |
China National Standards Geometrical |
English PDF |
| GB/T 17851-2010 |
Geometrical Product Specifications (GPS) - Geometrical tolerancing - Datums and datum system 产品几何技术规范(GPS) 几何公差 基准和基准体系 |
China National Standards Geometrical |
English PDF |
| GB/T 24762-2009 |
Geometrical product specifications (GPS) - Acceptance test and reverification test for video measuring machine 产品几何技术规范（GPS） 影像测量仪的验收检测和复检检测 |
China National Standards Geometrical |
English PDF |
| GB/T 24744-2009 |
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) 产品几何规范(GPS) 技术产品文件(TPD)中模制件的表示法 |
China National Standards Geometrical |
English PDF |
| GB/T 24734.6-2009 |
Technical product documentation - Digital product definition data practices - Part 6: Feature specification for Geometrical modeling 技术产品文件 数字化产品定义数据通则 第6部分：几何建模特征规范 |
China National Standards Geometrical |
English PDF |
| GB/T 24734.11-2009 |
Technical product documentation - Digital product definition data practices - Part 11: Levels of Geometrical detail 技术产品文件 数字化产品定义数据通则 第11部分：模型几何细节层级 |
China National Standards Geometrical |
English PDF |
| GB/Z 24638-2009 |
Geometrical product specifications (GPS) - Linear and angular dimensioning and tolerancing: +/- limit specifications - Step dimensions, distances, angular sizes and radii 产品几何技术规范（GPS) 线性和角度尺寸与公差标注+/-极限规范 台阶尺寸、距离、角度尺寸和半径 |
China National Standards Geometrical |
English PDF |
| GB/Z 24637.2-2009 |
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets，specifications，operators and uncertainties 产品几何技术规范(GPS) 通用概念 第2部分：基本原则、规范、操作集和不确定度 |
China National Standards Geometrical |
English PDF |
| GB/Z 24637.1-2009 |
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification 产品几何技术规范(GPS) 通用概念 第1部分：几何规范和验证的模式 |
China National Standards Geometrical |
English PDF |
| GB/Z 24636.4-2009 |
Geometrical product specifications(GPS) - Statistical tolerance - Part 4: Statistical tolerance design based on given confidence levels 产品几何技术规范（GPS） 统计公差 第4部分：基于给定置信水平的统计公差设计 |
China National Standards Geometrical |
English PDF |
| GB/Z 24636.3-2009 |
Geometrical product specifications(GPS) - Statistical tolerance - Part 3: Statistical quality indices of a component lot（process） 产品几何技术规范（GPS） 统计公差 第3部分：零件批(过程)的统计质量指标 |
China National Standards Geometrical |
English PDF |
| GB/Z 24636.2-2009 |
Geometrical product specifications(GPS) - Statistical tolerance - Part 2: Statistical tolerance values and their indication on drawing 产品几何技术规范（GPS） 统计公差 第2部分：统计公差值及其图样标注 |
China National Standards Geometrical |
English PDF |
| GB/Z 24636.1-2009 |
Geometrical product specifications(GPS) - Statistical tolerance - Part 1: Terms, definitions and basic concepts 产品几何技术规范（GPS） 统计公差 第1部分：术语、定义和基本概念 |
China National Standards Geometrical |
English PDF |
| GB/T 24635.3-2009 |
Geometrical product specifications (GPS) - Coordinate measuring machines(CMM) - Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards 产品几何技术规范（GPS) 坐标测量机（CMM） 确定测量不确定度的技术 第3部分：应用已校准工件或标准件 |
China National Standards Geometrical |
English PDF |
| GB/T 24634-2009 |
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment 产品几何技术规范（GPS） GPS 测量设备通用概念和要求 |
China National Standards Geometrical |
English PDF |
| GB/T 18777-2009 |
Geometrical product specifications (GPS) - Surface texture - Profile method - Metrological characteristics of phase correct filters 产品几何技术规范（GPS） 表面结构 轮廓法 相位修正滤波器的计量特性 |
China National Standards Geometrical |
English PDF |
| GB/T 18618-2009 |
Geometrical product specifications (GPS) - Surface texture - Profile method - Motif parameters 产品几何技术规范（GPS） 表面结构 轮廓法 图形参数 |
China National Standards Geometrical |
English PDF |
| GB/T 24633.2-2009 |
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators 产品几何技术规范（GPS） 圆柱度 第2部分：规范操作集 |
China National Standards Geometrical |
English PDF |
| GB/T 24633.1-2009 |
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form 产品几何技术规范（GPS） 圆柱度 第1部分：词汇和参数 |
China National Standards Geometrical |
English PDF |
| GB/T 24632.2-2009 |
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators 产品几何技术规范（GPS） 圆度 第2部分：规范操作集 |
China National Standards Geometrical |
English PDF |
| GB/T 24632.1-2009 |
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness 产品几何技术规范（GPS） 圆度 第1部分：词汇和参数 |
China National Standards Geometrical |
English PDF |
| GB/T 24631.2-2009 |
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators 产品几何技术规范（GPS） 直线度 第2部分：规范操作集 |
China National Standards Geometrical |
English PDF |
| GB/T 24631.1-2009 |
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness 产品几何技术规范（GPS） 直线度 第1部分：词汇和参数 |
China National Standards Geometrical |
English PDF |
| GB/T 24630.2-2009 |
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators 产品几何技术规范（GPS） 平面度 第2部分：规范操作集 |
China National Standards Geometrical |
English PDF |
| GB/T 24630.1-2009 |
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness 产品几何技术规范（GPS） 平面度 第1部分：词汇和参数 |
China National Standards Geometrical |
English PDF |
| GB/T 16857.3-2009 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis 产品几何技术规范（GPS） 坐标测量机的验收检测和复检检测 第3部分：配置转台的轴线为第四轴的坐标测量机 |
China National Standards Geometrical |
English PDF |
| GB/T 23649-2009 |
Graphic technology - Process control - Optical, Geometrical and metrological requirements for reflection densitometers for graphic arts use 印刷技术 过程控制 印刷用反射密度计的光学、几何学和测量学要求 |
China National Standards Geometrical |
English PDF |
| GB/T 6062-2009 |
Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristic of contact(stylus) instruments 产品几何技术规范（GPS） 表面结构 轮廓法 接触(触针)式仪器的标称特性 |
China National Standards Geometrical |
English PDF |
| GB/T 4249-2009 |
Geometrical product specifications(GPS) - Tolerancing principle 产品几何技术规范（GPS） 公差原则 |
China National Standards Geometrical |
English PDF |
| GB/T 3505-2009 |
Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters 产品几何技术规范（GPS） 表面结构 轮廓法 术语、定义及表面结构参数 |
China National Standards Geometrical |
English PDF |
| GB/T 3177-2009 |
Geometrical product specifications (GPS) - Inspection of plain workpiece sizes 产品几何技术规范（GPS） 光滑工件尺寸的检验 |
China National Standards Geometrical |
English PDF |
| GB/T 18779.3-2009 |
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements 产品几何技术规范（GPS） 工件与测量设备的测量检验 第3部分：关于对测量不确定度的表述达成共识的指南 |
China National Standards Geometrical |
English PDF |
| GB/T 1801-2009 |
Geometrical product specifications (GPS) - Limits and fits - Selection of tolerance zones and fits 产品几何技术规范（GPS） 极限与配合 公差带和配合的选择 |
China National Standards Geometrical |
English PDF |
| GB/T 1800.2-2009 |
Geometrical product specifications (GPS) - Limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts 产品几何技术规范（GPS） 极限与配合 第2部分：标准公差等级和孔、轴极限偏差表 |
China National Standards Geometrical |
English PDF |
| GB/T 1800.1-2009 |
Geometrical product specifications (GPS) - Limits and fits - Part 1: Bases of tolerances, deviations and fits 产品几何技术规范（GPS） 极限与配合 第1部分：公差、偏差和配合的基础 |
China National Standards Geometrical |
English PDF |
| GB/T 16747-2009 |
Geometrical product specification (GPS) - Surface texture：Profile method - Surface waviness terms 产品几何技术规范（GPS） 表面结构 轮廓法 表面波纹度词汇 |
China National Standards Geometrical |
English PDF |
| GB/T 16671-2009 |
Geometrical product specifications(GPS) - Geometrical tolerancing - Maximum material requirement（MMR），least material requirement（LMR） and reciprocity requirement（RPR） 产品几何技术规范（GPS） 几何公差 最大实体要求、最小实体要求和可逆要求 |
China National Standards Geometrical |
English PDF |
| GB/T 14495-2009 |
Geometrical product specifications(GPS) - Surface texture: Profile method - Roughness comparison specimens for wooden pieces 产品几何技术规范（GPS) 表面结构 轮廓法 木制件表面粗糙度比较样块 |
China National Standards Geometrical |
English PDF |
| GB/T 12471-2009 |
Geometrical product specifications（GPS) - Wooden part - Limit and fit 产品几何技术规范（GPS） 木制件 极限与配合 |
China National Standards Geometrical |
English PDF |
| GB/T 10610-2009 |
Geometrical product specifications(GPS) - Surface texture：Profile method - Rules and procedures for the assessment of surface texture 产品几何技术规范（GPS） 表面结构 轮廓法 评定表面结构的规则和方法 |
China National Standards Geometrical |
English PDF |
| GB/T 1031-2009 |
Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values 产品几何技术规范（GPS) 表面结构 轮廓法 表面粗糙度参数及其数值 |
China National Standards Geometrical |
English PDF |
| GB/T 17645.101-2008 |
Industrial automation systems and integration - Parts library - Part 101: Geometrical view exchange protocol by parametric program 工业自动化系统与集成 零件库 第101部分：参数化程序的几何视图交换协议 |
China National Standards Geometrical |
English PDF |
| GB/T 11356.1-2008 |
Belt drives - Pulleys for V-belts (system based on datum width) -Geometrical inspection of grooves 带传动 V带轮(基准宽度制) 槽形检验 |
China National Standards Geometrical |
English PDF |
| GB/T 1182-2008 |
Geometrical Product Specifications(GPS) - Geometrical tolerancing - Tolerances of form,orientation,location and run-out 产品几何技术规范（GPS）几何公差 形状、方向、位置和跳动公差标注 |
China National Standards Geometrical |
English PDF |
| GB/Z 20308-2006 |
Geometrical product specifications(GPS) - Masterplan 产品几何技术规范(GPS) 总体规划 |
China National Standards Geometrical |
English PDF |
| GB/T 18778.3-2006 |
Geometrical Product Specifications(GPS) - Surface texture: Profile method - Surface having stratified functional properties - Part 3: Height characterization using the material probability curve 产品几何技术规范(GPS) 表面结构 轮廓法 具有复合加工特征的表面 第3部分: 用概率支承率曲线表征高度特性 |
China National Standards Geometrical |
English PDF |
| GB/T 16857.6-2006 |
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第6部分:计算高斯拟合要素的误差的评定 |
China National Standards Geometrical |
English PDF |
| GB/T 16857.2-2006 |
Geometrical Product Specifications(GPS) - Acceptance and reverification tests for coordinate measuring machines(CMM) - Part 2: CMMs used for measuring size 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第2部分: 用于测量尺寸的坐标测量机 |
China National Standards Geometrical |
English PDF |
| GB/T 131-2006 |
Geometrical Product Specifications (GPS) - Indication of surface texture in technical Product documentation 产品几何技术规范(GPS) 技术产品文件中表面结构的表示法 |
China National Standards Geometrical |
English PDF |
| GB/T 19765-2005 |
Geometrical Product Specifications(GPS)-Standard reference temperature for geometrical product specification and verification 产品几何量技术规范(GPS)--产品几何量技术规范和检验的标准参考温度 |
China National Standards Geometrical |
English PDF |
| GB/T 12360-2005 |
Geometrical Product Specifications(GPS) Cone fit 产品几何量技术规范(GPS) 圆锥配合 |
China National Standards Geometrical |
English PDF |
| GB/T 11334-2005 |
Geometrical Product Specifications(GPS)Cone tolerance 产品几何量技术规范(GPS) 圆锥公差 |
China National Standards Geometrical |
English PDF |
| GB/T 7235-2004 |
Geometrical Product Specifications(GPS)--Methods for the assessment of departure from roundness--Measurement of variations in radius 产品几何量技术规范(GPS) 评定圆度误差的方法 半径变化量测量 |
China National Standards Geometrical |
English PDF |
| GB/T 7234-2004 |
Geometrical Product Specifications(GPS)--Measurement of roundness--Terms，definitions and parameters of roundness 产品几何量技术规范(GPS) 圆度测量 术语、定义及参数 |
China National Standards Geometrical |
English PDF |
| GB/T 7220-2004 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--Surfaceroughness--Terminology--Measurement of surface roughness parameters 产品几何量技术规范(GPS) 表面结构 轮廓法 表面粗糙度 术语 参数测量 |
China National Standards Geometrical |
English PDF |
| GB/T 19600-2004 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--Calibrationof contact(stylus)instruments 产品几何量技术规范(GPS) 表面结构 轮廓法 接触(触针)式仪器的校准 |
China National Standards Geometrical |
English PDF |
| GB/T 1958-2004 |
Geometrical Product Specifications(GPS)--Geometrical tolerance--Verification prescription 产品几何量技术规范(GPS) 形状和位置公差 检测规定 |
China National Standards Geometrical |
English PDF |
| GB/T 19067.2-2004 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--Measurement standards--Part 2:Software measurement standards 产品几何量技术规范(GPS) 表面结构 轮廓法测量标准 第2部分:软件测量标准 |
China National Standards Geometrical |
English PDF |
| GB/T 18779.2-2004 |
Geometrical Product Specifications(GPS)--Inspection by measurement of workpieses and measuring equipment--Part 2:Guide to the estimation of uncertainty in GPS measurement，in calibration of measuring equipment and in product verification 产品几何量技术规范(GPS) 工件与测量设备的测量检验 第2部分:测量设备校准和产品检验中GPS测量的不确定度评定指南 |
China National Standards Geometrical |
English PDF |
| GB/T 16857.5-2004 |
Geometrical Product Specifications(GPS)--Acceptance and reverification tests for coordinate measuring machines(CMM)--Part 5:CMMs using multiple-stylus probing systems 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第5部分:使用多探针探测系统的坐标测量机 |
China National Standards Geometrical |
English PDF |
| GB/T 16656.503-2004 |
Industrial automation systems and integration--Product data representation and exchange--Part 503:Application interpreted construct:Geometrically bounded 2D wireframe 工业自动化系统与集成 产品数据表达与交换 第503部分:应用解释构造:几何有界二维线框 |
China National Standards Geometrical |
English PDF |
| GB/T 2821-2003 |
Gear--Symbols for Geometrical data 齿轮几何要素代号 |
China National Standards Geometrical |
English PDF |
| GB/T 19067.1-2003 |
Geometrical Product Specifications(GPS)--Surface texture: Profile method--Measurement standards--Part 1: Material measures 产品几何量技术规范(GPS) 表面结构 轮廓法 测量标准 第1部分:实物测量标准 |
China National Standards Geometrical |
English PDF |
| GB/T 18778.2-2003 |
Geometrical Product Specifications(GPS)--Surface texture: Profile method--Surface having stratified functional properties--Part 2: Height characterization using the linear material ratio curve 产品几何量技术规范(GPS) 表面结构 轮廓法 具有复合加工特征的表面 第2部分: 用线性化的支承率曲线表征高度特性 |
China National Standards Geometrical |
English PDF |
| GB/T 13319-2003 |
Geometrical Product Specifications(GPS)--Geometrical tolerancing--Positional tolerancing 产品几何量技术规范(GPS) 几何公差 位置度公差注法 |
China National Standards Geometrical |
English PDF |
| GB/T 18780.2-2003 |
Geometrical Product Specifications(GPS)--Geometrical features--Part 2: Extracted median line of a cylinder and a cone，extracted median surface，local size of an extracted feature 产品几何量技术规范(GPS) 几何要素 第2部分: 圆柱面和圆锥面的提取中心线、平行平面的提取中心面、提取要素的局部尺寸 |
China National Standards Geometrical |
English PDF |
| GB/T 16857.4-2003 |
Geometrical Product Specifications(GPS)--Acceptance andreverification tests for coordinate measuring machines(CMM)--Part 4: CMMs used in scanning measuring mode 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第4部分: 在扫描模式下使用的坐标测量机 |
China National Standards Geometrical |
English PDF |
| GB/T 12472-2003 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--Surface roughness parameters and their values for wooden pieces 产品几何量技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度参数及其数值 |
China National Standards Geometrical |
English PDF |
| GB/T 18780.1-2002 |
Geometrical product specifications(GPS)--Geometrical features--Part 1:General terms and definitions 产品几何量技术规范(GPS) 几何要素 第1部分:基本术语和定义 |
China National Standards Geometrical |
English PDF |
| GB/T 18779.1-2002 |
Geometrical product specifications (GPS)--Inspection by measurement of workpieces and measuring equipment--Part 1:Decision rules for proving conformance or non-conformance with specifications 产品几何量技术规范(GPS) 工件与测量设备的测量检验 第1部分:按规范检验合格或不合格的判定规则 |
China National Standards Geometrical |
English PDF |
| GB/T 18778.1-2002 |
Geometrical product specifications(GPS)--Surface texture:Profile method;Surfaces having stratified functional properties--Part 1:Filtering and general measurement conditions 产品几何量技术规范(GPS) 表面结构 轮廓法 具有复合加工特征的表面 第1部分:滤波和一般测量条件 |
China National Standards Geometrical |
English PDF |
| GB/T 16857.1-2002 |
Geometrical product specification(GPS)--Acceptance and reverification tests for coordinate measuring machines--Part 1:Vocabulary 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第1部分:词汇 |
China National Standards Geometrical |
English PDF |
| GB/T 15757-2002 |
Geometrical product specifications(GPS)--Surface imperfections--Terms，definitions and parameters 产品几何量技术规范(GPS) 表面缺陷 术语、定义及参数 |
China National Standards Geometrical |
English PDF |
| GB/T 3672.2-2002 |
Rubber--Tolerances of products--Part 2:Geometrical tolerances 橡胶制品的公差 第2部分:几何公差 |
China National Standards Geometrical |
English PDF |
| GB/T 4096-2001 |
Geometrical product specifications(GPS)--Series of angler and slopes on prisms 产品几何量技术规范(GPS) 棱体的角度与斜度系列 |
China National Standards Geometrical |
English PDF |
| GB/T 157-2001 |
Geometrical product specifications(GPS)--Series of conical tapers and taper angles 产品几何量技术规范(GPS) 圆锥的锥度与锥角系列 |
China National Standards Geometrical |
English PDF |
| GB/T 6093-2001 |
Geometrical product specifications(GPS)--Length standards--Gauge blocks 几何量技术规范(GPS) 长度标准 量块 |
China National Standards Geometrical |
English PDF |
| GB/T 1224-1999 |
Vocabulary and character for Geometrical optics 几何光学术语、符号 |
China National Standards Geometrical |
English PDF |
| GB/T 17852-1999 |
Geometrical tolerancing--Tolerancing of profile 形状和位置公差 轮廓的尺寸和公差注法 |
China National Standards Geometrical |
English PDF |
| GB/T 11356.2-1997 |
Belt drives--Pulley for classical and narrow V-belts drives(system based on effective width)--Geometrical inspection of grooves 带传动 普通及窄V带传动用带轮(有效宽度制) 槽形检验 |
China National Standards Geometrical |
English PDF |
| GB/T 4019.1-1997 |
Box type vertical drilling machines--Testing of the accuracy--Part 1:Geometrical tests 方柱立式钻床 精度检验 第1部分:几何精度检验 |
China National Standards Geometrical |
English PDF |
| GB/T 16892-1997 |
Geometrical tolerancing indication of non-rigid parts 形状和位置公差 非刚性零件注法 |
China National Standards Geometrical |
English PDF |
| GB/T 1184-1996 |
Geometrical tolerancing--Geometrical tolerance for features without individual tolerance indications 形状和位置公差 未注公差值 |
China National Standards Geometrical |
English PDF |
| GB/T 16443-1996 |
Planar double-enveloping worm gearing Geometrical data symbols 平面二次包络环面蜗杆传动几何要素代号 |
China National Standards Geometrical |
English PDF |
| GB/T 14777-1993 |
Geometrical orientation and directions of movements 几何定向及运动方向 |
China National Standards Geometrical |
English PDF |
| GB/T 305-2019 |
Rolling bearings－Snap ring grooves and snap rings for radial bearings－Dimensions，Geometrical product specifications (GPS) and tolerance values 滚动轴承 向心轴承止动槽和止动环 尺寸、产品几何技术规范（GPS）和公差值 |
China National Standards Geometrical |
English PDF |
| Find out:162Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
