Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB 4234.9-2023 |
Surgical implants Metallic materials Part 9: Forged high nitrogen stainless steel {译} 外科植入物 金属材料 第9部分：锻造高氮不锈钢 |
China National Standards Metallic materials |
 English PDF |
| GB/T 43432.3-2023 |
Metallic materials - Barcol hardness test Part 3: Calibration of standard hardness blocks {译} 金属材料 巴氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Metallic materials |
English PDF |
| GB/T 43432.2-2023 |
Metallic materials - Barcol hardness test - Part 2: Inspection and calibration of hardness testers {译} 金属材料 巴氏硬度试验 第2部分：硬度计的检验与校准 |
China National Standards Metallic materials |
English PDF |
| GB/T 43118-2023 |
Corrosion of metals and alloys Test method for high-temperature corrosion of Metallic materials under the action of deposits of salt, ash or other substances {译} 金属和合金的腐蚀 金属材料在盐、灰烬或其他物质的沉积物作用下进行高温腐蚀的试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 43115-2023 |
Metallic materials - Sheet and strip - Room temperature shear test methods {译} 金属材料 薄板和薄带 室温剪切试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 43112-2023 |
Metallic materials - Determination of elastic modulus - Rate jump method {译} 金属材料 弹性模量测定 率跳跃方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 42846-2023 |
Space environment Ground simulation method of space radiation effects of non-Metallic materials {译} 空间环境 非金属材料空间辐射效应地面模拟方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 42913-2023 |
Corrosion of metals and alloys Test methods for high-temperature corrosion of Metallic materials embedded in salt, ash or other solids {译} 金属和合金的腐蚀 金属材料嵌入在盐、灰烬或其他固体中的高温腐蚀试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 42912-2023 |
Corrosion of metals and alloys Test methods for high-temperature corrosion of Metallic materials under static immersion in molten salts or other liquids {译} 金属和合金的腐蚀 金属材料在静态浸入熔盐或其他液体条件下的高温腐蚀试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 42903-2023 |
Metallic materials—Method for determination of creep crack and creep-fatigue crack growth rates {译} 金属材料 蠕变裂纹及蠕变-疲劳裂纹扩展速率测定方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 42900-2023 |
High strain rate and high temperature compression test method for Metallic materials {译} 金属材料 高应变速率高温压缩试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 5482-2023 |
Metallic materials - Dynamic tear test method {译} 金属材料 动态撕裂试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 42617-2023 |
Additive Manufacturing Design Laser Powder Bed Fusion of Metallic materials {译} 增材制造 设计 金属材料激光粉末床熔融 |
China National Standards Metallic materials |
English PDF |
| GB/T 2651-2023 |
Destructive test of welds of Metallic materials Transverse tensile test {译} 金属材料焊缝破坏性试验 横向拉伸试验 |
China National Standards Metallic materials |
English PDF |
| GB/T 28896-2023 |
Metallic materials - Test method for the determination of quasi-static fracture toughness of welded joints {译} 金属材料 焊接接头准静态断裂韧度测定的试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 239.2-2023 |
Metallic materials - wire rods - Part 2: Test methods for bidirectional torsion {译} 金属材料 线材 第2部分：双向扭转试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 239.1-2023 |
Metallic materials - wire rods - Part 1: Test method for unidirectional torsion {译} 金属材料 线材 第1部分：单向扭转试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 17394.3-2022 |
Metallic materials - Leeb hardness test - Part 3: Calibration of standard hardness blocks {译} 金属材料 里氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Metallic materials |
English PDF |
| GB/T 17394.2-2022 |
Metallic materials - Leeb hardness test - Part 2: Inspection and calibration of hardness testers {译} 金属材料 里氏硬度试验 第2部分：硬度计的检验与校准 |
China National Standards Metallic materials |
English PDF |
| GB/T 230.3-2022 |
Metallic materials - Rockwell hardness test - Part 3: Calibration of standard hardness blocks {译} 金属材料 洛氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Metallic materials |
English PDF |
| GB/T 21838.3-2022 |
Metallic materials - Instrumented indentation tests for hardness and material parameters - Part 3: Calibration of standard blocks {译} 金属材料 硬度和材料参数的仪器化压入试验 第3部分：标准块的标定 |
China National Standards Metallic materials |
English PDF |
| GB/T 21838.2-2022 |
Metallic materials - Instrumented indentation tests for hardness and material parameters - Part 2: Verification and calibration of testing machines {译} 金属材料 硬度和材料参数的仪器化压入试验 第2部分：试验机的检验和校准 |
China National Standards Metallic materials |
English PDF |
| GB/T 231.3-2022 |
Metallic materials - Brinell hardness test - Part 3: Calibration of standard hardness blocks {译} 金属材料 布氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Metallic materials |
English PDF |
| GB/T 231.2-2022 |
Metallic materials - Brinell hardness test - Part 2: Inspection and calibration of hardness testers {译} 金属材料 布氏硬度试验 第2部分：硬度计的检验与校准 |
China National Standards Metallic materials |
English PDF |
| GB/T 230.2-2022 |
Metallic materials - Rockwell hardness test - Part 2: Inspection and calibration of hardness testers and indenters {译} 金属材料 洛氏硬度试验 第2部分：硬度计及压头的检验与校准 |
China National Standards Metallic materials |
English PDF |
| GB/T 26642-2022 |
Non-destructive testing—Industrial computed radiography with storage phosphor imaging plates—General principles for testing of Metallic materials using X-rays and gamma rays 无损检测 基于存储磷光成像板的工业计算机射线照相检测 金属材料X射线和伽玛射线检测总则 |
China National Standards Metallic materials |
English PDF |
| GB/T 18449.4-2022 |
Metallic materials—Knoop hardness test—Part 4: Tables of hardness values 金属材料 努氏硬度试验 第4部分: 硬度值表 |
China National Standards Metallic materials |
English PDF |
| GB/T 4340.4-2022 |
Metallic materials—Vickers hardness test—Part 4：Tables of hardness values 金属材料 维氏硬度试验 第4部分: 硬度值表 |
China National Standards Metallic materials |
English PDF |
| GB/T 16825.1-2022 |
Metallic materials - Inspection and calibration of static uniaxial testing machines - Part 1: Tensile and (or) compression testing machines - Inspection and calibration of force measuring systems {译} 金属材料 静力单轴试验机的检验与校准 第1部分：拉力和（或）压力试验机 测力系统的检验与校准 |
China National Standards Metallic materials |
English PDF |
| GB/T 26957-2022 |
Destructive testing of welds in Metallic materials - Tensile test methods for cross joints and lap joints {译} 金属材料焊缝破坏性试验 十字接头和搭接接头拉伸试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 2652-2022 |
Destructive test of welds in Metallic materials Longitudinal tensile test of weld metal in fusion welded joints {译} 金属材料焊缝破坏性试验 熔化焊接头焊缝金属纵向拉伸试验 |
China National Standards Metallic materials |
English PDF |
| GB/T 20568-2022 |
Metallic materials - Hydraulic test method for pipe rings {译} 金属材料 管环液压试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 2650-2022 |
Destructive testing of welds in Metallic materials Impact testing {译} 金属材料焊缝破坏性试验 冲击试验 |
China National Standards Metallic materials |
English PDF |
| GB/T 40410-2021 |
Metallic materials—Multiaxial fatigue testing—Axial-torsional strain-controlled method 金属材料 多轴疲劳试验 轴向-扭转应变控制方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 24524-2021 |
Metallic materials—Sheet and strip—Hole expanding test 金属材料 薄板和薄带 扩孔试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 24183-2021 |
Metallic materials—Sheet and Strip—Earing test 金属材料 薄板和薄带 制耳试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 3075-2021 |
Metallic materials—Fatigue testing—Axial force-controlled method 金属材料 疲劳试验 轴向力控制方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 26077-2021 |
Metallic materials—Fatigue testing—Axial-strain-controlled method 金属材料 疲劳试验 轴向应变控制方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 9790-2021 |
Metallic materials—Vickers and Knoop microhardness tests of metallic and other inorganic coatings 金属材料 金属及其他无机覆盖层的维氏和努氏显微硬度试验 |
China National Standards Metallic materials |
English PDF |
| GB/T 41107.2-2021 |
Destructive tests on welds in Metallic materials -- Hot cracking tests for weldments -- Arc welding processes -- Part 2: Self-restraint tests 金属材料焊缝破坏性试验 焊件的热裂纹试验 弧焊方法 第2部分：自拘束试验 |
China National Standards Metallic materials |
English PDF |
| GB/T 41107.1-2021 |
Destructive tests on welds in Metallic materials -- Hot cracking tests for weldments -- Arc welding processes -- Part 1: General 金属材料焊缝破坏性试验 焊件的热裂纹试验 弧焊方法 第1部分：总则 |
China National Standards Metallic materials |
English PDF |
| GB/T 22565.1-2021 |
Metallic materials -- Sheet and strip -- Method for spring back evaluation -- Part 1: Stretch bending 金属材料 薄板和薄带 回弹性能评估方法 第1部分：拉弯法 |
China National Standards Metallic materials |
English PDF |
| GB/T 41154-2021 |
Metallic materials—Multiaxial fatigue testing—Axial-torsional strain-controlled thermo-mechanical fatigue testing method 金属材料 多轴疲劳试验 轴向-扭转应变控制热机械疲劳试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 228.1-2021 |
Metallic materials—Tensile testing—Part 1: Method of test at room temperature 金属材料 拉伸试验 第1部分:室温试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 27552-2021 |
Destructive tests on welds in Metallic materials—Microhardness testing of welded joints 金属材料焊缝破坏性试验 焊接接头显微硬度试验 |
China National Standards Metallic materials |
English PDF |
| GB/T 229-2020 |
Metallic materials—Charpy pendulum impact test method 金属材料 夏比摆锤冲击试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 20671.3-2020 |
Classification system and test methods for nonmetallic gasket materials—Part 3: Standard test method for fluid resistance of gasket materials 非金属垫片材料分类体系及试验方法 第3部分:垫片材料耐液性试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 20671.5-2020 |
Classification system and test methods for nonmetallic gasket materials—Part 5: Standard test method for creep relaxation of gasket materials 非金属垫片材料分类体系及试验方法 第5部分：垫片材料蠕变松弛率试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 20671.6-2020 |
Classification system and test methods for nonmetallic gasket materials—Part 6: Standard test method for adhesion of gasket materials to metal surfaces 非金属垫片材料分类体系及试验方法 第6部分：垫片材料与金属表面黏附性试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 38822-2020 |
Metallic materials—Creep-fatigue test method 金属材料 蠕变-疲劳试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 38811-2020 |
Metallic materials—Residual stress—Method of sound beam control 金属材料 残余应力 声束控制法 |
China National Standards Metallic materials |
English PDF |
| GB/T 38806-2020 |
Metallic materials—Sheet and strip—Test method for bending and folding properties 金属材料 薄板和薄带 弯折性能试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 38804-2020 |
Test method for oxidation of Metallic materials exposed in high-temperature steam 金属材料高温蒸汽氧化试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 24522-2020 |
Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳态裂纹扩展阻力的试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 20671.1-2020 |
Classification system and test methods for nonmetallic gasket materials—Part 1：Standard classification system for nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第1部分:非金属垫片材料分类体系 |
China National Standards Metallic materials |
English PDF |
| GB/T 38769-2020 |
Metallic materials－Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces 金属材料 预裂纹夏比试样冲击加载断裂韧性的测定 |
China National Standards Metallic materials |
English PDF |
| GB/T 4156-2020 |
Metallic materials—Sheet and strip—Erichsen cupping test 金属材料 薄板和薄带 埃里克森杯突试验 |
China National Standards Metallic materials |
English PDF |
| GB/T 38719-2020 |
Metallic materials—Tube—Determination of biaxial stress-strain curve of tube by hydro-bulging test 金属材料 管 测定双轴应力-应变曲线的液压胀形试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 38684-2020 |
Metallic materials—Sheet and strip—Biaxial stress-strain curve by means of bulge test—Optical measuring systems 金属材料 薄板和薄带 双轴应力-应变曲线胀形试验 光学测量方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 39635-2020 |
Metallic materials—Measurement of indentation tensile properties and residual stresses by an instrumented indentation test 金属材料 仪器化压入法测定压痕拉伸性能和残余应力 |
China National Standards Metallic materials |
English PDF |
| GB/T 21838.4-2020 |
Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 4: Test method for metallic and non-metallic coatings 金属材料 硬度和材料参数的仪器化压入试验 第4部分:金属和非金属覆盖层的试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 2976-2020 |
Metallic materials—Wire—Wrapping test 金属材料 线材 缠绕试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 24523-2020 |
Metallic materials—Test method for rapid indentation (Brinell type) hardness testing 金属材料 快速压入（布氏型）硬度试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/Z 38434-2019 |
Metallic materials—Guide to test pieces preparation for mechanical testing 金属材料 力学性能试验用试样制备指南 |
China National Standards Metallic materials |
English PDF |
| GB/T 38430-2019 |
Corrosion of metals and alloys—Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for Metallic materials 金属和合金的腐蚀 金属材料在高温腐蚀条件下的等温暴露氧化试验方法 |
China National Standards Metallic materials |
English PDF |
| GB 4234.4-2019 |
Implants for surgery—Metallic materials—Part 4: Cobalt-chromium-molybdenum casting alloy 外科植入物 金属材料 第4部分：铸造钴-铬-钼合金 |
China National Standards Metallic materials |
English PDF |
| GB 4234.4-2019 |
Implants for surgery—Metallic materials—Part 4: Cobalt-chromium-molybdenum casting alloy 外科植入物 金属材料 第4部分：铸造钴-铬-钼合金 |
China National Standards Metallic materials |
English PDF |
| GB/T 37787-2019 |
Metallic materials—Determination of microporosity—Fluorescence method 金属材料 显微疏松的测定 荧光法 |
China National Standards Metallic materials |
English PDF |
| GB/T 37783-2019 |
Metallic materials—High strain rate tensile test method at elevated temperature 金属材料 高应变速率高温拉伸试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 37782-2019 |
Metallic materials—Indentation test—Determination of strength, hardness and stress-strain curve 金属材料 压入试验 强度、硬度和应力-应变曲线的测定 |
China National Standards Metallic materials |
English PDF |
| GB/T 25048-2019 |
Metallic materials—Tube—Ring tensile test 金属材料 管 环拉伸试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 21838.1-2019 |
Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 1:Test method 金属材料 硬度和材料参数的仪器化压入试验 第1部分：试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 19748-2019 |
Metallic materials—Charpy V-notch pendulum impact test—Instrumented test method 金属材料 夏比V型缺口摆锤冲击试验 仪器化试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 228.4-2019 |
Metallic materials—Tensile testing—Part 4: Method of test in liquid helium 金属材料 拉伸试验 第4部分：液氦试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 228.3-2019 |
Metallic materials—Tensile testing—Part 3: Method of test at low temperature 金属材料 拉伸试验 第3部分：低温试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 37306.2-2019 |
Metallic materials—Fatigue testing—Variable amplitude fatiguetesting—Part 2: Cycle counting and related data reduction methods 金属材料 疲劳试验 变幅疲劳试验 第2部分：循环计数和相关数据缩减方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 37306.1-2019 |
Metallic materials—Fatigue testing—Variable amplitude fatigue testing—Part 1: General principles, test method and reporting requirements 金属材料 疲劳试验 变幅疲劳试验 第1部分：总则、试验方法和报告要求 |
China National Standards Metallic materials |
English PDF |
| GB/T 351-2019 |
Metallic materials—Resistivity measurement method 金属材料 电阻率测量方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 37208-2018 |
Nonmetallic paper based wet type frictional materials 非金属纸基湿式摩擦材料 |
China National Standards Metallic materials |
English PDF |
| GB/T 37209-2018 |
Nonmetallic rubber base wet type frictional materials 非金属橡胶基湿式摩擦材料 |
China National Standards Metallic materials |
English PDF |
| GB/T 230.1-2018 |
Metallic materials—Rockwell hardness test—Part 1：Test method 金属材料 洛氏硬度试验 第1部分: 试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 231.1-2018 |
Metallic materials—Brinell hardness test—Part 1: Test method 金属材料 布氏硬度试验 第1部分: 试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 35085-2018 |
Destructive tests on welds in Metallic materials—Vickers and Knoop Hardness testing of joints welded by laser and electron beam 金属材料焊缝破坏性试验 激光和电子束焊接接头的维氏和努氏硬度试验 |
China National Standards Metallic materials |
English PDF |
| GB/T 34542.3-2018 |
Storage and transportation systems for gaseous hydrogen—Part 3: Test method for determination of the susceptibility of Metallic materials to hydrogen gas embrittlement (HGE) 氢气储存输送系统 第3部分：金属材料氢脆敏感度试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 36024-2018 |
Metallic materials—Sheet and strip—Biaxial tensile testing method using a cruciform test piece 金属材料 薄板和薄带 十字形试样双向拉伸试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 34477-2017 |
Metallic materials—Sheet and strip—Dent resistance test method 金属材料 薄板和薄带 抗凹性能试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 14265-2017 |
General rule of chemical analysis for hydrogen,oxygen,nitrogen,carbon and sulfur in Metallic materials 金属材料中氢、氧、氮、碳和硫分析方法通则 |
China National Standards Metallic materials |
English PDF |
| GB/T 34628-2017 |
Non-destructive testing of welds—General rules for Metallic materials 焊缝无损检测 金属材料应用通则 |
China National Standards Metallic materials |
English PDF |
| GB/T 34205-2017 |
Metallic materials—Hardness testing—Ultrasonic contact impedance method 金属材料 硬度试验 超声接触阻抗法 |
China National Standards Metallic materials |
English PDF |
| GB/T 34108-2017 |
Metallic materials—High strain rate compression test method at ambient temperature 金属材料 高应变速率室温压缩试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 34104-2017 |
Metallic materials—Verification of the alignment of testing machines 金属材料 试验机加载同轴度的检验 |
China National Standards Metallic materials |
English PDF |
| GB/T 33965-2017 |
Metallic materials—Tensile testing—Determination of thickness reduction ratio for rectangular specimen 金属材料 拉伸试验 矩形试样减薄率的测定 |
China National Standards Metallic materials |
English PDF |
| GB/T 246-2017 |
Metallic materials—Tube—Flattening test 金属材料 管 压扁试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 6398-2017 |
Metallic materials—Fatigue testing—Fatigue crack growth method 金属材料 疲劳试验 疲劳裂纹扩展方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 33820-2017 |
Metallic materials—Ductility testing—High speed compression test for porous and cellular metals 金属材料 延性试验 多孔状和蜂窝状金属高速压缩试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 7314-2017 |
Metallic materials—Compression test method at room temperature 金属材料 室温压缩试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 12443-2017 |
Metallic materials—Torque-controlled fatigue testing 金属材料 扭矩控制疲劳试验方法 |
China National Standards Metallic materials |
English PDF |
| GB 4234.1-2017 |
Implants for surgery—Metallic materials—Part 1: Wrought stainless steel 外科植入物 金属材料 第1部分：锻造不锈钢 |
China National Standards Metallic materials |
English PDF |
| GB/T 34903.1-2017 |
Petroleum,petrochemical and natural gas industries—Non-Metallic materials in contact with media related to oil and gas production—Part 1:Thermoplastics 石油、石化与天然气工业 与油气开采相关介质接触的非金属材料 第1部分：热塑性塑料 |
China National Standards Metallic materials |
English PDF |
| GB/T 34903.2-2017 |
Petroleum,petrochemical and natural gas industries—Non-Metallic materials in contact with media related to oil and gas production—Part 2:Elastomers 石油、石化与天然气工业 与油气开采相关介质接触的非金属材料 第2部分：弹性体 |
China National Standards Metallic materials |
English PDF |
| GB/T 33362-2016 |
Metallic materials—Conversion of hardness values 金属材料 硬度值的换算 |
China National Standards Metallic materials |
English PDF |
| GB/T 33163-2016 |
Metallic materials—Residual stress—With ultrasonic impact treatment 金属材料 残余应力 超声冲击处理法 |
China National Standards Metallic materials |
English PDF |
| GB/T 4341.3-2016 |
Metallic materials—Shore hardness test—Part 3: Calibration of reference blocks 金属材料 肖氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Metallic materials |
English PDF |
| GB/T 4341.2-2016 |
Metallic materials—Shore hardness test—Part 2: Verification of hardness testers 金属材料 肖氏硬度试验 第2部分：硬度计的检验 |
China National Standards Metallic materials |
English PDF |
| GB/T 32967.1-2016 |
Metallic materials—Torsional test method at high strain rates—Part 1: Method of test at room temperature 金属材料 高应变速率扭转试验 第1部分：室温试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 245-2016 |
Metallic materials—Tube—Flanging test 金属材料 管 卷边试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 25047-2016 |
Metallic materials—Tube—Ring-expanding test 金属材料 管 环扩张试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 32976-2016 |
Metallic materials—Tubes—Transverse bending test 金属材料 管 横向弯曲试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 32660.2-2016 |
Metallic materials—Webster hardness test—Part 2: Verification and calibration of hardness testers 金属材料 韦氏硬度试验 第2部分：硬度计的检验与校准 |
China National Standards Metallic materials |
English PDF |
| GB/T 32660.3-2016 |
Metallic materials—Webster hardness test—Part 3: Calibration of reference blocks 金属材料 韦氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Metallic materials |
English PDF |
| GB/T 32660.1-2016 |
Metallic materials—Webster hardness test—Part 1: Test method 金属材料 韦氏硬度试验 第1部分：试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 5027-2016 |
Metallic materials—Sheet and strip—Determination of plastic strain ratio 金属材料 薄板和薄带 塑性应变比（r值）的测定 |
China National Standards Metallic materials |
English PDF |
| GB/T 30069.2-2016 |
Metallic materials—Tensile testing at high strain rates—Part 2: Servo-hydraulic and other test systems 金属材料 高应变速率拉伸试验 第2部分：液压伺服型与其他类型试验系统 |
China National Standards Metallic materials |
English PDF |
| GB/T 32260.3-2015 |
Destructive tests on welds in Metallic materials—Cold cracking tests for weldments—Arc welding processes—Part 3: Externally load tests 金属材料焊缝的破坏性试验 焊件的冷裂纹试验 弧焊方法 第3部分：外载荷试验 |
China National Standards Metallic materials |
English PDF |
| GB/T 32260.2-2015 |
Destructive tests on welds in Metallic materials—Cold cracking tests for weldments—Arc welding processes—Part 2: Self-restraint tests 金属材料焊缝的破坏性试验 焊件的冷裂纹试验 弧焊方法 第2部分：自拘束试验 |
China National Standards Metallic materials |
English PDF |
| GB/T 32260.1-2015 |
Destructive tests on welds in Metallic materials—Cold cracking tests for weldments—Arc welding processes—Part 1: General 金属材料焊缝的破坏性试验 焊件的冷裂纹试验 弧焊方法 第1部分：总则 |
China National Standards Metallic materials |
English PDF |
| GB/T 20236-2015 |
Accelerated outdoor weathering test methods for nonMetallic materials using concentrated natural sunlight 非金属材料的聚光加速户外暴露试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 4337-2015 |
Metallic materials—Fatigue testing—Rotating bar bending method 金属材料 疲劳试验 旋转弯曲方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 31930-2015 |
Metallic materials—Ductility testing—Compression test for porous and cellular metals 金属材料 延性试验 多孔状和蜂窝状金属压缩试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 228.2-2015 |
Metallic materials—Tensile testing—Part 2: Method of test at elevated temperature 金属材料 拉伸试验 第2部分：高温试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 31973-2015 |
Natural weathering exposure tests for automotive non-Metallic materials and parts 汽车非金属材料及部件自然曝露试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 31854-2015 |
Test method for measuring metallic impurities content in silicon materials used for photovoltaic applications by inductively coupled plasma mass spectrometry 光伏电池用硅材料中金属杂质含量的电感耦合等离子体质谱测量方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 31554-2015 |
Non-magnetic metallic coatings on metallic and non-metallic basismaterials—Measurement of coating thickness—Phase-sensitive eddy-current method 金属和非金属基体上非磁性金属覆盖层 覆盖层厚度测量 相敏涡流法 |
China National Standards Metallic materials |
English PDF |
| GB/T 21143-2014 |
Metallic materials―Unified method of test for determination of quasistatic fracture toughness 金属材料 准静态断裂韧度的统一试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 17394.1-2014 |
Metallic materials―Leeb hardness test―Part 1: Test method 金属材料 里氏硬度试验 第1部分：试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 4341.1-2014 |
Metallic materials—Shore hardness test—Part 1: Test method 金属材料 肖氏硬度试验 第1部分：试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 31218-2014 |
Metallic materials—Determination of residual stress—Sectioning relaxation strain-gage method 金属材料 残余应力测定 全释放应变法 |
China National Standards Metallic materials |
English PDF |
| GB/T 17394.4-2014 |
Metallic materials―Leeb hardness test―Part 4：Tables of hardness values conversation 金属材料 里氏硬度试验 第4部分：硬度值换算表 |
China National Standards Metallic materials |
English PDF |
| GB 17168-2013 |
Dentistry—Metallic materials for fixed and removable restorations and appliances 牙科学 固定和活动修复用金属材料 |
China National Standards Metallic materials |
English PDF |
| GB/T 30069.1-2013 |
Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems 金属材料 高应变速率拉伸试验 第1部分：弹性杆型系统 |
China National Standards Metallic materials |
English PDF |
| GB/T 30064-2013 |
Metallic materials - Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components 金属材料 钢构件断裂评估中裂纹尖端张开位移（CTOD）断裂韧度的拘束损失修正方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 15748-2013 |
The method of galvanic corrosion test for metallic ship materials 船用金属材料电偶腐蚀试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 29849-2013 |
Test method for measuring surface metallic contamination of silicon materials used for photovoltaic applications by inductively coupled plasma mass spectrometry 光伏电池用硅材料表面金属杂质含量的电感耦合等离子体质谱测量方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 238-2013 |
Metallic materials - Wire - Reverse bend test 金属材料 线材 反复弯曲试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 235-2013 |
Metallic materials - Sheet and strip - Reverse bend test 金属材料 薄板和薄带 反复弯曲试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 10120-2013 |
Metallic materials - Tensile stress relaxation - Method of test 金属材料 拉伸应力松弛试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 29459.2-2012 |
Small punch test methods of Metallic materials for in-service pressure equipments - Part 2：Method of test for tensile properties at room temperature 在役承压设备金属材料小冲杆试验方法 第2部分：室温下拉伸性能的试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 29459.1-2012 |
Small punch test methods of Metallic materials for in-service pressure equipments - Part 1：General requirements 在役承压设备金属材料小冲杆试验方法 第1部分：总则 |
China National Standards Metallic materials |
English PDF |
| GB/T 4340.3-2012 |
Metallic materials - Vickers hardness test - Part 3：Calibration of reference blocks 金属材料 维氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Metallic materials |
English PDF |
| GB/T 4340.2-2012 |
Metallic materials - Vickers hardness test - Part 2：Verification and calibration of testing machines 金属材料 维氏硬度试验 第2部分：硬度计的检验与校准 |
China National Standards Metallic materials |
English PDF |
| GB/T 231.3-2012 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks 金属材料 布氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Metallic materials |
English PDF |
| GB/T 231.2-2012 |
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines 金属材料 布氏硬度试验 第2部分：硬度计的检验与校准 |
China National Standards Metallic materials |
English PDF |
| GB/T 230.3-2012 |
Metallic materials - Rockwell hardness test - Part 3：Calibration of reference blocks(scales A,B,C,D,E,F,G,H,K,N,T) 金属材料 洛氏硬度试验 第3部分：标准硬度块（A、B、C、D、E、F、G、H、K、N、T标尺）的标定 |
China National Standards Metallic materials |
English PDF |
| GB/T 230.2-2012 |
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines(scales A,B,C,D,E,F,G,H,K,N,T) 金属材料 洛氏硬度试验 第2部分：硬度计（A、B、C、D、E、F、G、H、K、N、T标尺）的检验与校准 |
China National Standards Metallic materials |
English PDF |
| GB/T 18449.3-2012 |
Metallic materials - Knoop hardness test - Part 3：Calibration of reference blocks 金属材料 努氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Metallic materials |
English PDF |
| GB/T 18449.2-2012 |
Metallic materials - Knoop hardness test - Part 2：Verification and calibration of testing machines 金属材料 努氏硬度试验 第2部分：硬度计的检验与校准 |
China National Standards Metallic materials |
English PDF |
| GB/T 17394.3-2012 |
Metallic materials - Leeb hardness test - Part 3: Calibration of reference blocks 金属材料 里氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Metallic materials |
English PDF |
| GB/T 17394.2-2012 |
Metallic materials - Leeb hardness test - Part 2: Verification and calibration of hardness testers 金属材料 里氏硬度试验 第2部分：硬度计的检验与校准 |
China National Standards Metallic materials |
English PDF |
| GB/T 28896-2012 |
Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds 金属材料 焊接接头准静态断裂韧度测定的试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 2039-2012 |
Metallic materials - Uniaxial creep testing method in tension 金属材料 单轴拉伸蠕变试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 239.2-2012 |
Metallic materials - Wire - Part 2: Reverse torsion test 金属材料 线材 第2部分：双向扭转试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 239.1-2012 |
Metallic materials - Wire - Part 1: Simple torsion test 金属材料 线材 第1部分：单向扭转试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 27970-2011 |
Test method for weight loss of non-metallic gasket materials upon exposure to elevated temperatures 非金属垫片材料烧失量试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 11441.2-2011 |
Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic Metallic materials 通信和电子设备用变压器和电感器铁心片 第2部分：软磁金属叠片最低磁导率规范 |
China National Standards Metallic materials |
English PDF |
| GB/T 27552-2011 |
Destructive tests on welds in Metallic materials - Microhardness testing of welded joints 金属材料焊缝破坏性试验 焊接接头显微硬度试验 |
China National Standards Metallic materials |
English PDF |
| GB/T 27551-2011 |
Destructive tests on welds in Metallic materials - Fracture test 金属材料焊缝破坏性试验 断裂试验 |
China National Standards Metallic materials |
English PDF |
| GB/T 26957-2011 |
Destructive tests on welds in Metallic materials - Tensile test on cruciform and lapped joints 金属材料焊缝破坏性试验 十字形接头和搭接接头拉伸试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 26956-2011 |
Destructive tests on welds in Metallic materials - Etchants for macroscopic and microscopic examination 金属材料焊缝破坏性试验 宏观和微观检验用侵蚀剂 |
China National Standards Metallic materials |
English PDF |
| GB/T 26955-2011 |
Destructive tests on welds in Metallic materials - Macroscopic and microscopic examination of welds 金属材料焊缝破坏性试验 焊缝宏观和微观检验 |
China National Standards Metallic materials |
English PDF |
| GB/T 26642-2011 |
Non-destructive testing - Test method for computed radiography of Metallic materials 无损检测 金属材料计算机射线照相检测方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 26078-2010 |
Metallic materials - Welding residual stresses - Method with explosion treatment 金属材料 焊接残余应力 爆炸处理法 |
China National Standards Metallic materials |
English PDF |
| GB/T 26077-2010 |
Metallic materials - Fatigue testing - Axial-strain-controlled method 金属材料 疲劳试验 轴向应变控制方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 228.1-2010 |
Metallic materials - Tensile testing - Part 1 : Method of test at room temperature 金属材料 拉伸试验 第1部分：室温试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 25048-2010 |
Metallic materials - Tube - Ring tensile test 金属材料 管 环拉伸试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 25047-2010 |
Metallic materials - Tube - Ring-expanding test 金属材料 管 环扩张试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 232-2010 |
Metallic materials - Bend test 金属材料 弯曲试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 24524-2009 |
Metallic materials - Sheet and strip - Hole expanding test 金属材料 薄板和薄带 扩孔试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 24523-2009 |
Test method for rapid indentation (Brinell) hardness testing of Metallic materials 金属材料快速压痕（布氏）硬度试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 24522-2009 |
Metallic materials - Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳定裂纹扩展阻力的试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 24584-2009 |
Metallic materials - Tensile testing - Method of test in liquid helium 金属材料 拉伸试验 液氦试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 12467.5-2009 |
Quality requirements for fusion welding of Metallic materials - Part 5: Standard documents need to conform to claim conformity to the quality requirements 金属材料熔焊质量要求 第5部分：满足质量要求应依据的标准文件 |
China National Standards Metallic materials |
English PDF |
| GB/T 12467.4-2009 |
Quality reqirements for fusion welding of Metallic materials - Part 4: Elementary quality requirements 金属材料熔焊质量要求 第4部分：基本质量要求 |
China National Standards Metallic materials |
English PDF |
| GB/T 12467.3-2009 |
Quality reqirements for fusion welding of Metallic materials - Part 3: Standard quality requirements 金属材料熔焊质量要求 第3部分：一般质量要求 |
China National Standards Metallic materials |
English PDF |
| GB/T 12467.2-2009 |
Quality reqirements for fusion welding of Metallic materials - Part 2: Comprehensive quality requirements 金属材料熔焊质量要求 第2部分：完整质量要求 |
China National Standards Metallic materials |
English PDF |
| GB/T 12467.1-2009 |
Quality reqirements for fusion welding of Metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements 金属材料熔焊质量要求 第1部分：质量要求相应等级的选择准则 |
China National Standards Metallic materials |
English PDF |
| GB/T 4340.4-2009 |
Metallic materials - Vickers hardness test - Part 4: Tables of hardness values 金属材料 维氏硬度试验 第4部分：硬度值表 |
China National Standards Metallic materials |
English PDF |
| GB/T 4340.1-2009 |
Metallic materials - Vickers hardness test - Part 1: Test method 金属材料 维氏硬度试验 第1部分：试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 24183-2009 |
Metallic materials - Earing test 金属材料 制耳试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 24179-2009 |
Metallic materials - Residual stress determination - The indentation strain-gage method 金属材料 残余应力测定 压痕应变法 |
China National Standards Metallic materials |
English PDF |
| GB/T 24176-2009 |
Metallic materials - Fatigue testing - Statistical planning and analysis of data 金属材料 疲劳试验 数据统计方案与分析方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 24172-2009 |
Method for evaluation of tensile properties of metallic superplastic materials 金属超塑性材料拉伸性能测定方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 24171.2-2009 |
Metallic materials - Sheet and strip - Determinations of forming limit curves - Part 2: Determinations of forming limit curves in laboratory 金属材料 薄板和薄带 成形极限曲线的测定 第2部分：实验室成形极限曲线的测定 |
China National Standards Metallic materials |
English PDF |
| GB/T 24171.1-2009 |
Metallic materials - Sheet and strip - Determination of forming limit curves - Part 1: Measurement and application of forming limit diagrams in press shop 金属材料 薄板和薄带 成形极限曲线的测定 第1部分：冲压车间成形极限图的测量及应用 |
China National Standards Metallic materials |
English PDF |
| GB/T 231.4-2009 |
Metallic materials - Brinell hardness test - Part 4: Tables of hardness values 金属材料 布氏硬度试验 第4部分：硬度值表 |
China National Standards Metallic materials |
English PDF |
| GB/T 231.1-2009 |
Metallic materials - Brinell hardness test - Part 1: Test method 金属材料 布氏硬度试验 第1部分：试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 230.1-2009 |
Metallic materials - Rockwell hardness test - Part 1: Test method(scales A、B、C、D、E、F、G、H、K、N、T) 金属材料 洛氏硬度试验 第1部分：试验方法（A、B、C、D、E、F、G、H、K、N、T标尺） |
China National Standards Metallic materials |
English PDF |
| GB/T 18449.4-2009 |
Metallic materials - Knoop hardness test - Part 4: Tables of hardness values 金属材料 努氏硬度试验 第4部分：硬度值表 |
China National Standards Metallic materials |
English PDF |
| GB/T 18449.1-2009 |
Metallic materials - Knoop hardness test - Part 1: Test method 金属材料 努氏硬度试验 第1部分：试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 23909.3-2009 |
Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of Metallic materials by X- and gamma rays 无损检测 射线透视检测 第3部分：金属材料X和伽玛射线透视检测总则 |
China National Standards Metallic materials |
English PDF |
| GB/T 18325.4-2009 |
Plain bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing materials 滑动轴承 轴承疲劳 第4部分：金属多层轴承材料轴瓦试验 |
China National Standards Metallic materials |
English PDF |
| GB 23102-2008 |
Implants for surgery - Metallic materials - Wrought titanium -6aluminium-7niobium alloy 外科植入物 金属材料 Ti-6Al-7Nb合金加工材 |
China National Standards Metallic materials |
English PDF |
| GB/T 12239-2008 |
Industrial valves - Diaphragm valves made of Metallic materials 工业阀门 金属隔膜阀 |
China National Standards Metallic materials |
English PDF |
| GB/T 5028-2008 |
Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent 金属材料 薄板和薄带 拉伸应变硬化指数（n值）的测定 |
China National Standards Metallic materials |
English PDF |
| GB/T 22565-2008 |
Metallic materials - Sheet and strip - Method for springback evaluation in stretch bending 金属材料 薄板和薄带 拉弯回弹评估方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 4339-2008 |
Test methods for thermal expansion characteristic parameters of Metallic materials 金属材料热膨胀特征参数的测定 |
China National Standards Metallic materials |
English PDF |
| GB/T 4337-2008 |
Metallic materials - Fatigue testing - Rotating bar bending method 金属材料 疲劳试验 旋转弯曲方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 3075-2008 |
Metallic materials - Fatigue testing - Axial-force-controlled method 金属材料 疲劳试验 轴向力控制方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 22315-2008 |
Metallic materials - Determination of modulus of elasticity and poisson’s ratio 金属材料 弹性模量和泊松比试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 6384-2008 |
The testing methods for seawater corrosion in natural environment of Metallic materials for ship and offshore structures 船舶及海洋工程用金属材料在天然环境中的海水腐蚀试验方法 |
China National Standards Metallic materials |
English PDF |
| GB/T 21838.3-2008 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks 金属材料 硬度和材料参数的仪器化压痕试验 第3部分: 标准块的标定 |
China National Standards Metallic materials |
English PDF |
| Find out:249Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
