Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB 8109-2023 |
Trolley Mounted fire extinguisher {译} 推车式灭火器 |
China National Standards Mounted |
 English PDF |
| GB/T 43326.3-2023 |
Snow throwers - Safety requirements and test methods - Part 3: Mounted snow throwers {译} 抛雪机 安全要求和试验方法 第3部分：坐骑式抛雪机 |
China National Standards Mounted |
English PDF |
| GB/T 5338.5-2023 |
Series 1 containers - Technical requirements and test methods - Part 5: Platform and rack-Mounted containers {译} 系列1集装箱 技术要求和试验方法 第5部分：平台和台架式集装箱 |
China National Standards Mounted |
English PDF |
| GB/T 43187-2023 |
Vehicle-Mounted wireless communication terminal {译} 车载无线通信终端 |
China National Standards Mounted |
English PDF |
| GB/T 25359-2023 |
Oil and Gas Industry Integrated skid-Mounted reciprocating compressors {译} 石油及天然气工业 集成撬装往复压缩机 |
China National Standards Mounted |
English PDF |
| GB/T 42474.3-2023 |
Safety monitoring system for vehicle transportation of explosive hazardous chemicals Part 3: Installation of vehicle-Mounted devices {译} 爆炸危险化学品汽车运输安全监控系统 第3部分：车载装置安装 |
China National Standards Mounted |
English PDF |
| GB/T 42474.2-2023 |
Safety monitoring system for vehicle transportation of explosive hazardous chemicals Part 2: Vehicle-Mounted devices {译} 爆炸危险化学品汽车运输安全监控系统 第2部分：车载装置 |
China National Standards Mounted |
English PDF |
| GB/T 42321-2023 |
Additional requirements for 3.6 kV to 40.5 kV pole-Mounted metal-enclosed switchgear with internal arc category {译} 具有内部电弧类别的3.6 kV～40.5 kV柱上安装金属封闭开关设备的附加要求 |
China National Standards Mounted |
English PDF |
| GB/T 41656-2022 |
Road vehicles - Mechanical coupling of towing vehicles with rear-Mounted towbar couplings to towbar trailers - Interchangeability {译} 道路车辆 尾部安装牵引杆连接器的牵引车与牵引杆挂车间的机械连接 互换性 |
China National Standards Mounted |
English PDF |
| GB/T 41651-2022 |
Road vehicles - Mechanical coupling of towing vehicles with lower front Mounted towbar connectors and center axle trailers - Interchangeability {译} 道路车辆 前下部安装牵引杆连接器的牵引车和中置轴挂车间的机械连接 互换性 |
China National Standards Mounted |
English PDF |
| GB/T 41452-2022 |
Technical specification for production of vehicle Mounted mobile measurement 3D model {译} 车载移动测量三维模型生产技术规程 |
China National Standards Mounted |
English PDF |
| GB/T 22264.1-2022 |
Mounted digital display electrical measuring instruments - Part 1: definitions and general requirements {译} 安装式数字显示电测量仪表 第1部分：定义和通用要求 |
China National Standards Mounted |
English PDF |
| GB/T 18380.34-2022 |
Fire tests of electric and optical cables under fire conditions - Part 34: vertical flame spread test for vertically Mounted bunched wires and cables, class B {译} 电缆和光缆在火焰条件下的燃烧试验 第34部分：垂直安装的成束电线电缆火焰垂直蔓延试验 B类 |
China National Standards Mounted |
English PDF |
| GB/T 18380.33-2022 |
Fire tests of electric and optical cables under fire conditions - Part 33: vertical flame spread test for vertically Mounted bunched wires and cables, class A {译} 电缆和光缆在火焰条件下的燃烧试验 第33部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A类 |
China National Standards Mounted |
English PDF |
| GB/T 18380.32-2022 |
Fire tests of electric and optical cables under fire conditions - Part 32: vertical flame spread test for vertically Mounted bunched wires and cables, class A, f / R {译} 电缆和光缆在火焰条件下的燃烧试验 第32部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A F/R类 |
China National Standards Mounted |
English PDF |
| GB/T 18380.36-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 36：Test for vertical flame spread of vertically-Mounted bunched wires or cables—Category D 电缆和光缆在火焰条件下的燃烧试验 第36部分：垂直安装的成束电线电缆火焰垂直蔓延试验 D类 |
China National Standards Mounted |
English PDF |
| GB/T 18380.35-2022 |
Tests on electric and optical fibre cables under fire conditions - Part 35: Test for vertical flame spread of vertically-Mounted bunched wires or cables - Category C 电缆和光缆在火焰条件下的燃烧试验 第35部分：垂直安装的成束电线电缆火焰垂直蔓延试验 C类 |
China National Standards Mounted |
English PDF |
| GB/T 18380.31-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 31: Test for vertical flame spread of vertically-Mounted bunched wires or cables—Apparatus 电缆和光缆在火焰条件下的燃烧试验 第31部分：垂直安装的成束电线电缆火焰垂直蔓延试验 试验装置 |
China National Standards Mounted |
English PDF |
| GB/T 22264.8-2022 |
Mounted electrical measuring instruments with digital display - Part 8: Test methods {译} 安装式数字显示电测量仪表 第8部分：试验方法 |
China National Standards Mounted |
English PDF |
| GB/T 22264.6-2022 |
Mounted electrical measuring instruments with digital display - Part 6: Particular requirements for insulation resistance meters {译} 安装式数字显示电测量仪表 第6部分：绝缘电阻表的特殊要求 |
China National Standards Mounted |
English PDF |
| GB/T 22264.7-2022 |
Mounted electrical measuring instruments with digital display - Part 7: Particular requirements for multifunction instruments {译} 安装式数字显示电测量仪表 第7部分：多功能仪表的特殊要求 |
China National Standards Mounted |
English PDF |
| GB/T 22264.4-2022 |
Mounted electrical measuring instruments with digital display - Part 4: Particular requirements for frequency meters {译} 安装式数字显示电测量仪表 第4部分：频率表的特殊要求 |
China National Standards Mounted |
English PDF |
| GB/T 22264.3-2022 |
Mounted electrical measuring instruments with digital display - Part 3: Particular requirements for wattmeters and reactive wattmeters {译} 安装式数字显示电测量仪表 第3部分：功率表和无功功率表的特殊要求 |
China National Standards Mounted |
English PDF |
| GB/T 22264.2-2022 |
Mounted electrical measuring instruments with digital display - Part 2: Particular requirements for ammeters and voltmeters {译} 安装式数字显示电测量仪表 第2部分：电流表和电压表的特殊要求 |
China National Standards Mounted |
English PDF |
| GB/T 41787.1-2022 |
Ceiling-Mounted interface for indoor LED lighting equipment - Part 1: Specifications for mechanical and electrical interfaces {译} 室内LED照明设备天花板安装接口 第1部分:机械接口和电气接口规范 |
China National Standards Mounted |
English PDF |
| GB/T 23537-2021 |
Superabrasive products - Grinding wheels and Mounted points with diamond or cubic boron nitride - Limit deviations and run-out tolerances 超硬磨料制品 金刚石或立方氮化硼砂轮和磨头 极限偏差和圆跳动公差 |
China National Standards Mounted |
English PDF |
| GB/T 40852.1-2021 |
High frequency inductive components—Non-electrical characteristics and measuring methods—Part 1:Fixed,surface Mounted inductors for use in electronic and telecommunication equipment 高频感性元件 非电特性及其测量方法 第1部分：电子和通信设备用表面安装固定电感器 |
China National Standards Mounted |
English PDF |
| GB/T 20888.2-2020 |
Machinery for forestry—Safety requirements and testing for pole-Mounted powered pruners—Part 2：Machines for use with back-pack power source 林业机械 杆式动力修枝锯安全要求和试验 第2部分：背负式动力修枝锯 |
China National Standards Mounted |
English PDF |
| GB/T 20888.1-2020 |
Machinery for forestry—Safety requirements and testing for pole-Mounted powered pruners—Part 1: Machines fitted with an integral combustion engine 林业机械 杆式动力修枝锯安全要求和试验 第1部分：侧挂式动力修枝锯 |
China National Standards Mounted |
English PDF |
| GB/T 38259-2019 |
Information technology—General specification for virtual reality head Mounted display device 信息技术 虚拟现实头戴式显示设备通用规范 |
China National Standards Mounted |
English PDF |
| GB/T 38259-2019 |
Information technology—General specification for virtual reality head Mounted display device 信息技术 虚拟现实头戴式显示设备通用规范 |
China National Standards Mounted |
English PDF |
| GB/T 9465-2018 |
Vehicle-Mounted mobile elevating work platform 高空作业车 |
China National Standards Mounted |
English PDF |
| GB/T 36410.2-2018 |
Energy consumption evaluation methods of port equipment—Part 2: Rail Mounted container gantry crane 港口设备能源消耗评价方法 第2部分：轨道式集装箱门式起重机 |
China National Standards Mounted |
English PDF |
| GB/T 4937.15-2018 |
Semiconductor devices—Mechanical and climatic test methods—Part 15: Resistance to soldering temperature for through-hole Mounted devices 半导体器件 机械和气候试验方法 第15部分：通孔安装器件的耐焊接热 |
China National Standards Mounted |
English PDF |
| GB/T 4127.17-2017 |
Bonded abrasive products—Dimensions—Part 17: Spindle Mounted wheels 固结磨具 尺寸 第17部分：带柄磨头 |
China National Standards Mounted |
English PDF |
| GB/T 2775-2016 |
Capacitors and resistors for use in electronic equipment—Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-Mounted, shaft-operated electronic components 电子设备用电容器和电阻器 轴端、轴套和单孔轴套安装及轴控电子元件的优选尺寸 |
China National Standards Mounted |
English PDF |
| GB/T 1592.3-2016 |
Agricultural tractors—Rear-Mounted power take-off types 1,2 ,3 and 4—Part 3: Main PTO dimensions and spline dimensions, location of PTO 农业拖拉机 后置动力输出轴 1、2、3和4型 第3部分：动力输出轴尺寸和花键尺寸、动力输出轴位置 |
China National Standards Mounted |
English PDF |
| GB/T 1592.2-2016 |
Agricultural tractors—Rear-Mounted power take-off types 1,2,3 and 4—Part 2: Narrow-track tractors, dimensions for master shield and clearance zone 农业拖拉机 后置动力输出轴 1、2、3和4型 第2部分：窄轮距拖拉机防护罩尺寸和空隙范围 |
China National Standards Mounted |
English PDF |
| GB/T 1592.1-2016 |
Agricultural tractors—Rear-Mounted power take-off types 1, 2, 3 and 4—Part 1: General specifications，safety requirements，dimensions for master shield and clearance zone 农业拖拉机 后置动力输出轴 1、2、3和4型 第1部分：通用要求、安全要求、防护罩尺寸和空隙范围 |
China National Standards Mounted |
English PDF |
| GB/T 21956.3-2015 |
Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 3：Static testing method of rear Mounted ROPS 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第3部分：后置式静态试验方法 |
China National Standards Mounted |
English PDF |
| GB/T 21956.2-2015 |
Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 2：Dynamic testing method of front Mounted ROPS 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第2部分：前置式动态试验方法 |
China National Standards Mounted |
English PDF |
| GB/T 21956.1-2015 |
Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 1：Static testing method of front Mounted ROPS 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第1部分：前置式静态试验方法 |
China National Standards Mounted |
English PDF |
| GB/T 21155-2015 |
Earth-moving machinery—Machine-Mounted audible travel alarms and forward horns—Test methods and performance criteria 土方机械 行车声响报警装置和前方喇叭 试验方法和性能准则 |
China National Standards Mounted |
English PDF |
| GB/T 31849-2015 |
Film Mounted motor vehicle glass 汽车贴膜玻璃 |
China National Standards Mounted |
English PDF |
| GB/T 31848-2015 |
Film Mounted motor vehicle glass—Requirements for mounting 汽车贴膜玻璃 贴膜要求 |
China National Standards Mounted |
English PDF |
| GB/T 1593-2015 |
Agricultural Wheeled tractor—Rear-Mounted three-point linkage—Categories 0、1N、1、2N、2、3N、3、4N and 4 农业轮式拖拉机 后置式三点悬挂装置 0、1N、1、2N、2、3N、3、4N和4类 |
China National Standards Mounted |
English PDF |
| GB/T 10916.2-2015 |
Agricultural wheeled tractors—Front-Mounted equipment—Part 2：Stationary equipment connection 农业轮式拖拉机 前置装置 第2部分：固定设备的连接 |
China National Standards Mounted |
English PDF |
| GB/T 31262-2014 |
General technical requirements for Ku band vehicle Mounted-satellite communication earth station under stationary using Ku频段静止中使用的车载卫星通信地球站通用技术要求 |
China National Standards Mounted |
English PDF |
| GB 20888.2-2013 |
Machinery for forestry―Safety requirements and testing for pole-Mounted powered pruners―Part 2: Machines for use with back-pack power source 林业机械 杆式动力修枝锯安全要求和试验 第2部分：背负式动力修枝锯 |
China National Standards Mounted |
English PDF |
| GB 20888.1-2013 |
Machinery for forestry―Safety requirements and testing for pole-Mounted powered pruners―Part 1: Machines fitted with an integral combustion engine 林业机械 杆式动力修枝锯安全要求和试验 第1部分：侧挂式动力修枝锯 |
China National Standards Mounted |
English PDF |
| GB/T 29010-2012 |
Building construction machinery and equipment - Crawler Mounted recycling equipment for construction waste - Terminology and commercial specifications 建筑施工机械与设备 履带式建设废弃物处理机械 术语和商业规格 |
China National Standards Mounted |
English PDF |
| GB/T 28446.1-2012 |
Human exposure to radio frequency fields from hand-held and body-Mounted wireless communication devices - Human models, instrumentation, and procedures - Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close 手持和身体佩戴使用的无线通信设备对人体的电磁照射 人体模型、仪器和规程 第1部分：靠近耳边使用的手持式无线通信设备的SAR评估规程（频率范围300MHz～3GHz） |
China National Standards Mounted |
English PDF |
| GB/T 24678.2-2009 |
Equipment for crop protection - The stretcher-Mounted power sprayer with wide-swath and long-range 植物保护机械 担架式宽幅远射程喷雾机 |
China National Standards Mounted |
English PDF |
| GB/T 22264.8-2009 |
Mounted digital display electric measuring instruments - Part 8: Recommended test methods 安装式数字显示电测量仪表 第8部分：推荐的试验方法 |
China National Standards Mounted |
English PDF |
| GB/T 22264.6-2009 |
Mounted digital display electric measuring instruments - Part 6: Special requirements for insulation resistance meters 安装式数字显示电测量仪表 第6部分：绝缘电阻表的特殊要求 |
China National Standards Mounted |
English PDF |
| GB/T 23537-2009 |
Superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride and Mounted points 超硬磨料制品 金刚石或立方氮化硼砂轮和磨头 极限偏差和圆跳动公差 |
China National Standards Mounted |
English PDF |
| GB/T 21956.4-2009 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 4: Dynamic testing method of rear Mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第4部分：后置式动态试验方法 |
China National Standards Mounted |
English PDF |
| GB 7000.212-2008 |
Luminaires - Part 2-12: Particular requirements - Mains socket-outlet Mounted nightlights 灯具 第2-12部分：特殊要求 电源插座安装的夜灯 |
China National Standards Mounted |
English PDF |
| GB/T 22264.7-2008 |
Mounted digital display electric measuring instruments - Part 7: Special requirements for multi-function instruments 安装式数字显示电测量仪表 第7部分：多功能仪表的特殊要求 |
China National Standards Mounted |
English PDF |
| GB/T 22264.5-2008 |
Mounted digital display electric measuring instruments - Part 5: Special requirements for phase meters and power factor meters 安装式数字显示电测量仪表 第5部分：相位表和功率因数表的特殊要求 |
China National Standards Mounted |
English PDF |
| GB/T 22264.4-2008 |
Mounted digital display electric measuring instruments - Part 4: Special requirements for frequency meters 安装式数字显示电测量仪表 第4部分：频率表的特殊要求 |
China National Standards Mounted |
English PDF |
| GB/T 22264.3-2008 |
Mounted digital display electric measuring instruments - Part 3: Special requirements for wattmeters and varmeters 安装式数字显示电测量仪表 第3部分：功率表和无功功率表的特殊要求 |
China National Standards Mounted |
English PDF |
| GB/T 22264.2-2008 |
Mounted digital display electric measuring instruments - Part 2: Special requirements for ammeters and voltmeters 安装式数字显示电测量仪表 第2部分：电流表和电压表的特殊要求 |
China National Standards Mounted |
English PDF |
| GB/T 22264.1-2008 |
Mounted digital display electric measuring instruments - Part1: Definitions and general requirements common to all parts 安装式数字显示电测量仪表 第1部分：定义和通用要求 |
China National Standards Mounted |
English PDF |
| GB/T 22319.8-2008 |
Measurement of quartz crystal unit parameters - Part 8: Test fixture for surface Mounted quartz crystal units 石英晶体元件参数的测量 第8部分：表面贴装石英晶体元件用测量夹具 |
China National Standards Mounted |
English PDF |
| GB/T 1592.3-2008 |
Agricultural tractors - Rear- Mounted power take-off types 1,2 and 3 - Part 3: Main PTO dimensions and spline dimensions, location of PTO 农业拖拉机后置动力输出轴1、2和3型 第3部分：动力输出轴尺寸和花键尺寸、动力输出轴位置 |
China National Standards Mounted |
English PDF |
| GB/T 1592.2-2008 |
Agricultural tractors - Rear- Mounted power take-off types 1,2 and 3 - Part 2: Narrow-track tractors, dimensions for master shield and clearance zone 农业拖拉机后置动力输出轴 1、2和 3 型 第 2 部分：窄轮距拖拉机防护罩尺寸和空隙范围 |
China National Standards Mounted |
English PDF |
| GB/T 1592.1-2008 |
Agricultural tractors - Rear- Mounted power take-off types 1,2 and 3 - Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone 农业拖拉机后置动力输出轴 1、2和 3 型 第 1 部分：通用要求、安全要求、防护罩尺寸和空隙范围 |
China National Standards Mounted |
English PDF |
| GB/T 22162-2008 |
Dimensions of panel areas and cut-outs for panel and rack-Mounted industrial-process measurement and control instruments 盘装和架装工业过程测量和控制仪表的盘面和开孔尺寸 |
China National Standards Mounted |
English PDF |
| GB/T 18380.36-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 36:Test for vertical flame spread of vertically-Mounted bunched wires or cables - Category D 电缆和光缆在火焰条件下的燃烧试验 第36部分：垂直安装的成束电线电缆火焰垂直蔓延试验 D类 |
China National Standards Mounted |
English PDF |
| GB/T 18380.35-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 35:Test for vertical flame spread of vertically-Mounted bunched wires or cables - Category C 电缆和光缆在火焰条件下的燃烧试验 第35部分：垂直安装的成束电线电缆火焰垂直蔓延试验 C类 |
China National Standards Mounted |
English PDF |
| GB/T 18380.34-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 34:Test for vertical flame spread of vertically-Mounted bunched wires or cables - Category B 电缆和光缆在火焰条件下的燃烧试验 第34部分：垂直安装的成束电线电缆火焰垂直蔓延试验 B类 |
China National Standards Mounted |
English PDF |
| GB/T 18380.33-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 33:Test for vertical flame spread of vertically-Mounted bunched wires or cables - Category A 电缆和光缆在火焰条件下的燃烧试验 第33部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A类 |
China National Standards Mounted |
English PDF |
| GB/T 18380.32-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 32:Test for vertical flame spread of vertically-Mounted bunched wires or cables - Category A F/R 电缆和光缆在火焰条件下的燃烧试验 第32部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A F/R类 |
China National Standards Mounted |
English PDF |
| GB/T 18380.31-2008 |
Test on electric and optical fibre cables under fire conditions - Part 31:Test for vertical flame spread of vertically-Mounted bunched wires or cables - Apparatus 电缆和光缆在火焰条件下的燃烧试验 第31部分：垂直安装的成束电线电缆火焰垂直蔓延试验 试验装置 |
China National Standards Mounted |
English PDF |
| GB/T 7121.1-2008 |
The strength testing method and accepting conditions of the rear-Mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS 农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分：后置式静态试验方法 |
China National Standards Mounted |
English PDF |
| GB/T 21956.3-2008 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3：Static testing method of rear Mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第3部分：后置式静态试验方法 |
China National Standards Mounted |
English PDF |
| GB/T 21956.2-2008 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2：Dynamic testing method of front Mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第2部分：前置式动态试验方法 |
China National Standards Mounted |
English PDF |
| GB/T 21956.1-2008 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1：Static testing method of front Mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第1部分：前置式静态试验方法 |
China National Standards Mounted |
English PDF |
| GB/T 21936-2008 |
Earth-moving machinery - Machine-Mounted retrieval device - Performance requirements 土方机械 安装在机器上的拖拽装置 性能要求 |
China National Standards Mounted |
English PDF |
| GB/T 9465-2008 |
Vehicle-Mounted mobile elevating work platform 高空作业车 |
China National Standards Mounted |
English PDF |
| GB/T 21160-2007 |
Agricultural trailers - Balanced and semi-Mounted trailers - Determination of payload, vertical static load and axle load 农用挂车 全挂车和半挂车有效载荷、垂直静态载荷和轴载荷的测定 |
China National Standards Mounted |
English PDF |
| GB/T 21155-2007 |
Earth-moving machinery - Machine-Mounted forward and reverse audible warning alarm - Sound test method 土方机械 前进和倒退音响报警 声响试验方法 |
China National Standards Mounted |
English PDF |
| GB/T 20845-2007 |
Small craft - Inboard diesel engines - Engine-Mounted fuel and electrical components 小艇 舷内柴油机 机装燃油和电气部件 |
China National Standards Mounted |
English PDF |
| GB/T 20844-2007 |
Small craft - Inboard petrol engines - Engine-Mounted fuel and electrical components 小艇 舷内汽油机 机装燃油和电气部件 |
China National Standards Mounted |
English PDF |
| GB 15092.4-2006 |
Switches for appliances Part 2：Particular requirements for independently Mounted switches 器具开关 第2部分:独立安装开关的特殊要求 |
China National Standards Mounted |
English PDF |
| GB/T 20337-2006 |
Milling cutters Mounted on centring arbors having a 7:24 taper - lnsered tooth cutters 装在7:24锥柄心轴上的镶齿套式面铣刀 |
China National Standards Mounted |
English PDF |
| GB/T 20339-2006 |
Agricultural tractors and machinery - Tractor-Mounted sensor interface - Specifications 农业拖拉机和机械 固定在拖拉机上的传感器联接装置 技术规范 |
China National Standards Mounted |
English PDF |
| GB/T 19993-2005 |
Thermoplastics piping systems for hot and cold water supply-Test method for the resiance of pipes and fittings Mounted assemblies to thermal cycling 冷热水用热塑性塑料管道系统 管材管件组合系统热循环试验方法 |
China National Standards Mounted |
English PDF |
| GB/T 19683-2005 |
Rail Mounted transtainer 轨道式集装箱门式起重机 |
China National Standards Mounted |
English PDF |
| GB/T 10911-2003 |
Matching of agricultural wheeled tractors and rear Mounted implements 农业轮式拖拉机和后悬挂农具的匹配 |
China National Standards Mounted |
English PDF |
| GB/T 10916-2003 |
Agricultural wheeled tractors--Front-Mounted equipment--Part 1: Power take-off and three-point linkage 农业轮式拖拉机 前置装置 第1部分:动力输出轴和三点悬挂装置 |
China National Standards Mounted |
English PDF |
| GB/T 1242-2000 |
Dimensions for panel Mounted indicating and recording electrical measuring instruments 安装式指示和记录电测量仪表的尺寸 |
China National Standards Mounted |
English PDF |
| GB/T 16570-1996 |
Motor vehicles--Cradle-Mounted in-line fuel injection pumps for diesel engines--Mounting dimensions 汽车柴油机架装直列式喷油泵 安装尺寸 |
China National Standards Mounted |
English PDF |
| GB/T 16562-1996 |
Specifications for port rail-Mounted high mast type crane 港口高塔柱式轨道起重机技术条件 |
China National Standards Mounted |
English PDF |
| GB/T 14120-1993 |
Dimensions for the mounting of single-hole， bush-Mounted， spendle-operated electronic components 单孔轴套安装、轴控电子元件的安装尺寸 |
China National Standards Mounted |
English PDF |
| GB/T 3668.12-1983 |
Modular units for machine tool construction--Floor-Mounted type--Integral way columns--Dimensions 组合机床通用部件 落地式有导轨立柱尺寸 |
China National Standards Mounted |
English PDF |
| Find out:97Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
