Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43615-2023 |
Additive manufacturing Ultrasonic testing method of directed energy deposition metal forming Parts {译} 增材制造 定向能量沉积金属成形件超声检测方法 |
China National Standards Parts |
 English PDF |
| GB/T 43483-2023 |
Heavy machinery welding Parts design specifications {译} 重型机械 焊接件设计规范 |
China National Standards Parts |
English PDF |
| GB/T 24608-2023 |
Inspection rules for rolling bearings and their commercial Parts {译} 滚动轴承及其商品零件检验规则 |
China National Standards Parts |
English PDF |
| GB/T 43376-2023 |
Aerospace Heat treatable reinforced stainless steel Parts surface cleaning {译} 航空航天 可热处理强化不锈钢零件表面清理 |
China National Standards Parts |
English PDF |
| GB/T 9439-2023 |
Gray cast iron Parts {译} 灰铸铁件 |
China National Standards Parts |
English PDF |
| GB/T 43105-2023 |
Seamless steel pipe for hydroformed Parts {译} 液压成形件用无缝钢管 |
China National Standards Parts |
English PDF |
| GB/T 42842.2-2023 |
Microbubble Technology Cleaning Applications Part 2: Test methods for cleaning mechanical oil stains on the surface of machined metal Parts {译} 微细气泡技术 清洗应用 第2部分： 机加工金属零件表面机械油污清洗的试验方法 |
China National Standards Parts |
English PDF |
| GB/T 42951-2023 |
Timing instruments. Appearance Parts of watches made of hard materials. General requirements and test methods. {译} 计时仪器 硬材料制造的手表外观件 一般要求和试验方法 |
China National Standards Parts |
English PDF |
| GB/T 4678.14-2023 |
Die-casting mold Parts - Part 14: Stop pins {译} 压铸模 零件 第14部分：限位钉 |
China National Standards Parts |
English PDF |
| GB/T 4678.16-2023 |
Die-casting mold Parts - Part 16: Flat push rods {译} 压铸模 零件 第16部分：扁推杆 |
China National Standards Parts |
English PDF |
| GB/T 15116-2023 |
Die-casting copper alloy and copper alloy die-casting Parts {译} 压铸铜合金及铜合金压铸件 |
China National Standards Parts |
English PDF |
| GB/T 42400-2023 |
Hardness test method of metal Parts repaired by laser cladding {译} 激光熔覆修复金属零部件硬度试验方法 |
China National Standards Parts |
English PDF |
| GB/T 41508-2022 |
Additive Manufacturing General Rules Additive Manufacturing Parts Purchasing Requirements {译} 增材制造 通则 增材制造零件采购要求 |
China National Standards Parts |
English PDF |
| GB/T 41477-2022 |
Test method for mechanical properties of metal Parts repaired by laser cladding {译} 激光熔覆修复金属零部件力学性能试验方法 |
China National Standards Parts |
English PDF |
| GB/T 30580-2022 |
The technical guide for the life assessment of main pressure Parts of power plant boiler 电站锅炉主要承压部件寿命评估技术导则 |
China National Standards Parts |
English PDF |
| GB/T 16507.4-2022 |
Water-tube boilers—Part 4: Strength calculation of pressure Parts 水管锅炉 第4部分：受压元件强度计算 |
China National Standards Parts |
English PDF |
| GB/T 41951-2022 |
Corrosion of metals and alloys - Test method for corrosion resistance of steel connecting Parts and steel components for construction {译} 金属和合金的腐蚀 建筑用钢连接部件及钢构件耐腐蚀性能测试方法 |
China National Standards Parts |
English PDF |
| GB/T 41822-2022 |
Hot helium leak detection method for high temperature pressure-bearing Parts of nuclear fusion reactor {译} 核聚变堆高温承压部件的热氦检漏方法 |
China National Standards Parts |
English PDF |
| GB/T 37400.17-2022 |
General Specifications for Heavy Machinery Part 17: Repair Welding of Forged Steel Parts {译} 重型机械通用技术条件 第17部分：锻钢件补焊 |
China National Standards Parts |
English PDF |
| GB/T 41893-2022 |
Basic Requirements for Logistics Management of Digitalized Workshop in Hull Parts Manufacturing {译} 船体零部件制造数字化车间物流管理基本要求 |
China National Standards Parts |
English PDF |
| GB/T 42124.1-2022 |
Geometric product specification (GPS) Dimensional and geometric tolerances of molded Parts - Part 1: Vocabulary {译} 产品几何技术规范（GPS） 模制件的尺寸和几何公差 第1部分：词汇 |
China National Standards Parts |
English PDF |
| GB/T 16892-2022 |
Product Geometric Specification (GPS) Dimensioning and Tolerancing Non-rigid Parts {译} 产品几何技术规范（GPS） 尺寸和公差标注 非刚性零件 |
China National Standards Parts |
English PDF |
| GB/T 42051-2022 |
Inspection and maintenance requirements for structural Parts of manned submersibles {译} 载人潜水器结构件检测维护要求 |
China National Standards Parts |
English PDF |
| GB/T 41857-2022 |
Sheet metal fine-blanking extrusion composite formed Parts General technical requirements {译} 金属板料精冲挤压复合成形件 通用技术条件 |
China National Standards Parts |
English PDF |
| GB/T 40182-2021 |
Guideline of determining plasticized materials in toys or Parts of toys that can be placed in the mouth 玩具中塑化材料及可放入口中产品的判定指南 |
China National Standards Parts |
English PDF |
| GB/T 12265-2021 |
Safety of machinery—Minimum gaps to avoid crushing of Parts of the human body 机械安全 防止人体部位挤压的最小间距 |
China National Standards Parts |
English PDF |
| GB/T 39897-2021 |
Determination of volatile organic compounds and aldehydes and ketones in nonmetallic Parts of vehicles 车内非金属部件挥发性有机物和醛酮类物质检测方法 |
China National Standards Parts |
English PDF |
| GB/T 41158-2021 |
Management requirements for circulation information of automobile aftermarket Parts 汽车后市场配件流通信息管理要求 |
China National Standards Parts |
English PDF |
| GB/T 41040-2021 |
COTS semiconductor Parts for space application -- Quality assurance requirements 宇航用商业现货（COTS）半导体器件 质量保证要求 |
China National Standards Parts |
English PDF |
| GB/T 11807-2021 |
Characteristics,design and operational procedures for acoustic monitoring systems of loose Parts detection important to safety in nuclear power plants 核电厂安全重要松脱部件声学监测系统的特性、设计和运行规程 |
China National Standards Parts |
English PDF |
| GB/T 29632-2021 |
Range of main Parts and the guarantees certificate in repair,replacement and return warranty of household automobile 家用汽车产品三包主要零部件种类范围及三包凭证 |
China National Standards Parts |
English PDF |
| GB/T 39191-2020 |
Heat treatment for stainless steel and heat resistant steel Parts 不锈钢和耐热钢件热处理 |
China National Standards Parts |
English PDF |
| GB/T 39192-2020 |
Heat treatment of superalloy Parts 高温合金件热处理 |
China National Standards Parts |
English PDF |
| GB/T 38967-2020 |
Categories of typical structural elements for civil aircraft sheet metal Parts 民用飞机钣金件典型结构要素分类 |
China National Standards Parts |
English PDF |
| GB/T 38929-2020 |
General requirements of mirror milling process for civil aircraft skin Parts 民用飞机蒙皮镜像铣削工艺通用要求 |
China National Standards Parts |
English PDF |
| GB/T 38874.4-2020 |
Tractors and machinery for agriculture and forestry—Safety-related Parts of control systems—Part 4：Production,operation,modification and supporting processes 农林拖拉机和机械 控制系统安全相关部件 第4部分：生产、运行、修改与支持规程 |
China National Standards Parts |
English PDF |
| GB/T 38874.3-2020 |
Tractors and machinery for agriculture and forestry—Safety-related Parts of control systems—Part 3: Series development，hardware and software 农林拖拉机和机械 控制系统安全相关部件 第3部分：软硬件系列开发 |
China National Standards Parts |
English PDF |
| GB/T 38874.2-2020 |
Tractors and machinery for agriculture and forestry—Safety-related Parts of control systems—Part 2: Concept phase 农林拖拉机和机械 控制系统安全相关部件 第2部分：概念阶段 |
China National Standards Parts |
English PDF |
| GB/T 38874.1-2020 |
Tractors and machinery for agriculture and forestry—Safety-related Parts of control systems—Part 1：General principles for design and development 农林拖拉机和机械 控制系统安全相关部件 第1部分：设计与开发通则 |
China National Standards Parts |
English PDF |
| GB/T 38825-2020 |
Requirements of riveting connection in civil aircraft of composite Parts 民用飞机复合材料制件铆接要求 |
China National Standards Parts |
English PDF |
| GB/T 38751-2020 |
General rules of hardness test for heat treated Parts 热处理件硬度检验通则 |
China National Standards Parts |
English PDF |
| GB/T 39589-2020 |
Specifications for evaluation of modular design for Parts of mechanical products 机械产品零部件模块化设计评价规范 |
China National Standards Parts |
English PDF |
| GB/T 39316.3-2020 |
General resource of military and civilian—Meta data—Part 3: Equipment—Aviation repair Parts 军民通用资源 元数据 第3部分：器材类 航材 |
China National Standards Parts |
English PDF |
| GB/T 39315.3-2020 |
General resource of military and civilian—Data model—Part 3:Equipment—Aviation repair Parts 军民通用资源 数据模型 第3部分：器材类 航材 |
China National Standards Parts |
English PDF |
| GB/T 39254-2020 |
Additive manufacturing—Evaluation guideline for mechanical properties of metal Parts 增材制造 金属制件机械性能评价通则 |
China National Standards Parts |
English PDF |
| GB/T 39247-2020 |
Additive manufacturing—Specification for heat treatment process of metal Parts 增材制造 金属制件热处理工艺规范 |
China National Standards Parts |
English PDF |
| GB/T 39491-2020 |
General technical requirements of carbon fiber composites covering Parts for automobiles 汽车用碳纤维复合材料覆盖部件通用技术要求 |
China National Standards Parts |
English PDF |
| GB/T 38023-2019 |
Finishing requirements for Parts and assemblies of the mechanical watch movements 机械手表机心零部件的精饰要求 |
China National Standards Parts |
English PDF |
| GB/T 38003.3-2019 |
General resource of military and civilian—Classification and coding—Part 3：Equipment—Aviation repair Parts 军民通用资源 分类与编码 第3部分：器材类 航材 |
China National Standards Parts |
English PDF |
| GB/T 37400.3-2019 |
Heavy mechanical general technical specification—Part 3：Welding Parts 重型机械通用技术条件 第3部分：焊接件 |
China National Standards Parts |
English PDF |
| GB/T 20708-2019 |
Limit and determination of Parts of harmful substances in textile dyeing and finishing auxiliaries 纺织染整助剂产品中部分有害物质的限量及测定 |
China National Standards Parts |
English PDF |
| GB/T 37679-2019 |
Sheet metal Parts fabricated by fine blanking combined with extrusion process—Technological specification 金属板料精冲挤压复合成形件 工艺规范 |
China National Standards Parts |
English PDF |
| GB/T 37624-2019 |
Stationery and sport products and Parts—General requirements on volatile organic compounds (VOC) 文体用品及零部件 对挥发性有机化合物(VOC)的总体要求 |
China National Standards Parts |
English PDF |
| GB/T 4857.1-2019 |
Packaging—Basic tests for transport packages—Part 1:Identification of Parts when testing 包装 运输包装件基本试验 第1部分： 试验时各部位的标示方法 |
China National Standards Parts |
English PDF |
| GB/T 37584-2019 |
Heat treatment of titanium and titanium alloy Parts 钛及钛合金制件热处理 |
China National Standards Parts |
English PDF |
| GB/T 37400.13-2019 |
Heavy mechanical general technical specification—Part 9：Machining Parts 重型机械通用技术条件 第13部分：包装 |
China National Standards Parts |
English PDF |
| GB/T 37400.9-2019 |
Heavy mechanical general technical specification—Part 2：Flame cutting Parts 重型机械通用技术条件 第9部分：切削加工件 |
China National Standards Parts |
English PDF |
| GB/T 37217-2018 |
Specification for discard of the main Parts of escalators and moving walks 自动扶梯和自动人行道主要部件报废技术条件 |
China National Standards Parts |
English PDF |
| GB/T 3229-2018 |
Assembly tools for screws and nuts—Dimensions and torque testing of drive ends for hand and machine-operated screwdriver bits and connecting Parts 螺栓螺母用装配工具-手动和机动螺刀头的传动端和连接部件的尺寸及扭矩试验 |
China National Standards Parts |
English PDF |
| GB/T 16855.1-2018 |
Safety of machinery—Safety-related Parts of control systems—Part 1: General principles for design 机械安全-控制系统安全相关部件-第1部分：设计通则 |
China National Standards Parts |
English PDF |
| GB/T 35022-2018 |
Additive manufacturing—Main characteristics and corresponding test methods—Parts and powder materials 增材制造 主要特性和测试方法 零件和粉末原材料 |
China National Standards Parts |
English PDF |
| GB/T 36434-2018 |
Complex mechanical watch movements—Terminology for Parts and assemblies of perpetual calendar and repeater mechanism 复杂机械手表机心 万年历和打簧机构零部件的名称 |
China National Standards Parts |
English PDF |
| GB/T 36337-2018 |
The Parts-of-speech tagging set for Tibetan information processing 信息处理用藏语词类标记集 |
China National Standards Parts |
English PDF |
| GB/T 36684-2018 |
Service specification for automobile afer-sales spare and accessory Parts market 汽车售后零配件市场服务规范 |
China National Standards Parts |
English PDF |
| GB/T 34905-2017 |
Sintered metal materials—Determination of the level of cleanliness of powder-metallurgy Parts 烧结金属材料 粉末冶金零部件清洁度的测定 |
China National Standards Parts |
English PDF |
| GB/T 34882-2017 |
Induction hardening and tempering of iron and steel Parts 钢铁件的感应淬火与回火 |
China National Standards Parts |
English PDF |
| GB/T 34889-2017 |
Carburizing or carbonitriding,quenching and tempering of steel Parts 钢件的渗碳与碳氮共渗淬火回火 |
China National Standards Parts |
English PDF |
| GB/T 34891-2017 |
Rolling bearings—Parts made from high-carbon chromium bearing steels—Specifications for heat treatment 滚动轴承 高碳铬轴承钢零件 热处理技术条件 |
China National Standards Parts |
English PDF |
| GB/T 34837-2017 |
Classification, terminology and numbering for Parts and assemblies of the time measuring instruments—Quartz wrist watch movements 计时仪器零部件分类、名称和编号 石英手表机心 |
China National Standards Parts |
English PDF |
| GB/T 11373-2017 |
Thermal spraying—Pre-treatment of surfaces of metallic Parts and components 热喷涂 金属零部件表面的预处理 |
China National Standards Parts |
English PDF |
| GB/T 7676.1-2017 |
Direct acting indicating analogue electrical measuring Instruments and their accessories—Part 1：Definitions and general requirements common to all Parts 直接作用模拟指示电测量仪表及其附件 第1部分：定义和通用要求 |
China National Standards Parts |
English PDF |
| GB/T 33771-2017 |
Sound system equipment—Electroacoustical transducers—Measurement of suspension Parts 声系统设备 电声换能器 悬置部件的测量 |
China National Standards Parts |
English PDF |
| GB/T 33518-2017 |
Remanufacturing—Based on spectral analysis to detect assessment specification shaft Parts 再制造 基于谱分析轴系零部件检测评定规范 |
China National Standards Parts |
English PDF |
| GB/T 35456-2017 |
Stationery and sport products and its Parts—Test method for volatile organic compounds (VOC) 文体用品及零部件 对挥发性有机化合物(VOC)的测试方法 |
China National Standards Parts |
English PDF |
| GB/T 33245-2016 |
Information description of product for electronic commerce transaction—Automobile Parts 电子商务交易产品信息描述 汽车配件 |
China National Standards Parts |
English PDF |
| GB/T 33096-2016 |
General technical specification for wind power rubber to metal Parts 风力发电机组用橡胶弹性元件通用技术条件 |
China National Standards Parts |
English PDF |
| GB/T 6075.7-2015 |
Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating Parts—Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts 机械振动 在非旋转部件上测量评价机器的振动 第7部分：工业应用的旋转动力泵（包括旋转轴测量） |
China National Standards Parts |
English PDF |
| GB/T 32609-2016 |
The physical parameters and test methods of tennis rackets and Parts 网球拍及部件的物理参数和试验方法 |
China National Standards Parts |
English PDF |
| GB/T 32608-2016 |
The physical parameters and test methods of badminton racket and Parts 羽毛球拍及部件的物理参数和试验方法 |
China National Standards Parts |
English PDF |
| GB/T 2-2016 |
Fasteners—Ends of Parts with external thread 紧固件 外螺纹零件末端 |
China National Standards Parts |
English PDF |
| GB/T 6075.4-2015 |
Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating Parts—Part 4: Gas turbine sets with fluid-film bearings 机械振动 在非旋转部件上测量评价机器的振动 第4部分：具有滑动轴承的燃气轮机组 |
China National Standards Parts |
English PDF |
| GB/T 18376.3-2015 |
Grades of cemented carbide—Part 3: Grades of cemented carbide for wear Parts 硬质合金牌号 第3部分：耐磨零件用硬质合金牌号 |
China National Standards Parts |
English PDF |
| GB/T 16855.2-2015 |
Safety of machinery—Safety-related Parts of control systems—Part 2: Validation 机械安全 控制系统安全相关部件 第2部分：确认 |
China National Standards Parts |
English PDF |
| GB/T 31896-2015 |
Classification,terminology and numbering for Parts and assemblies of the time measuring instruments—Watch casings 计时仪器零部件分类、名称和编号 手表外观件 |
China National Standards Parts |
English PDF |
| GB/T 32007-2015 |
Unified coding and identification for auto Parts 汽车零部件的统一编码与标识 |
China National Standards Parts |
English PDF |
| GB/T 31973-2015 |
Natural weathering exposure tests for automotive non-metallic materials and Parts 汽车非金属材料及部件自然曝露试验方法 |
China National Standards Parts |
English PDF |
| GB/T 31821-2015 |
Specification for discard of the main Parts of lifts 电梯主要部件报废技术条件 |
China National Standards Parts |
English PDF |
| GB 31187-2014 |
Sporting goods―General requirements for electrical Parts 体育用品 电气部分的通用要求 |
China National Standards Parts |
English PDF |
| GB/T 31150-2014 |
Automotive Parts logistics plastic returnable containers―Size and technical parameters requirements 汽车零部件物流 塑料周转箱尺寸系列及技术要求 |
China National Standards Parts |
English PDF |
| GB/T 30580-2014 |
The technical guide for the life assessment of main pressure Parts of power plant boiler 电站锅炉主要承压部件寿命评估技术导则 |
China National Standards Parts |
English PDF |
| GB/T 30573-2014 |
Fine blanked Parts―General technical requirements 精密冲裁件 通用技术条件 |
China National Standards Parts |
English PDF |
| GB/T 30572-2014 |
Fine blanked Parts―Compiling rules of processes 精密冲裁件 工艺编制原则 |
China National Standards Parts |
English PDF |
| GB/T 30571-2014 |
General specifications of sheet metal stamping Parts 金属冷冲压件 通用技术条件 |
China National Standards Parts |
English PDF |
| GB/T 30570-2014 |
Structural main factors of sheet metal stamping Parts 金属冷冲压件 结构要素 |
China National Standards Parts |
English PDF |
| GB 30509-2014 |
Identification for passenger cars and their Parts 车辆及部件识别标记《第1号修改单》 |
China National Standards Parts |
English PDF |
| GB/T 6247.3-2013 |
Rock drilling machines and portable power tools―Terminology―Part 3: Accessories,Parts and mechanism 凿岩机械与便携式动力工具 术语 第3部分：零部件与机构 |
China National Standards Parts |
English PDF |
| GB/T 19150-2013 |
Parts library terms 零件库术语 |
China National Standards Parts |
English PDF |
| GB/T 16507.4-2013 |
Water-tube boilers―Part 4：Strength calculation of pressure Parts 水管锅炉 第4部分：受压元件强度计算 |
China National Standards Parts |
English PDF |
| GB/T 3390.3-2013 |
Hand operated socket wrenches - Driving Parts 手动套筒扳手 传动附件 |
China National Standards Parts |
English PDF |
| GB/T 17645.42-2013 |
Industrial automation systems and integration - Parts library - Part 42: Description methodology: Methodology for structuring parts families 工业自动化系统与集成 零件库 第42部分：描述方法学：构造零件族的方法学 |
China National Standards Parts |
English PDF |
| GB/T 29632-2013 |
The range of main Parts and the guarantees certificate in repair replacement and return warranty of automobile 家用汽车产品三包主要零件种类范围与三包凭证 |
China National Standards Parts |
English PDF |
| GB/T 29534-2013 |
General specifications of combined warm-cold forging Parts 温锻冷锻联合成形锻件 通用技术条件 |
China National Standards Parts |
English PDF |
| GB/T 13916-2013 |
Unnoted tolerance of shape and position for stamping Parts 冲压件形状和位置未注公差 |
China National Standards Parts |
English PDF |
| GB/T 13915-2013 |
Tolerance of angles for stamping Parts 冲压件角度公差 |
China National Standards Parts |
English PDF |
| GB/T 13914-2013 |
Tolerance of dimensions for stamping Parts 冲压件尺寸公差 |
China National Standards Parts |
English PDF |
| GB/T 6075.2-2012 |
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating Parts - Part 2: Land-based steam turbines and generators in excess of 50MW with normal operating speeds of 1500r/min，1800r/min，3000r/min and 3600r/min 机械振动 在非旋转部件上测量评价机器的振动 第2部分：50MW以上，额定转速1500 r/min、1800 r/min、3000 r/min、3600 r/min陆地安装的汽轮机和发电机 |
China National Standards Parts |
English PDF |
| GB/T 6075.1-2012 |
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating Parts - Part 1: General guidelines 机械振动 在非旋转部件上测量评价机器的振动 第1部分：总则 |
China National Standards Parts |
English PDF |
| GB/T 19876-2012 |
Safety of machinery ― Positioning of safeguards with respect to the approach speeds of Parts of the human body 机械安全 与人体部位接近速度相关的安全防护装置的定位 |
China National Standards Parts |
English PDF |
| GB/T 9630-2012 |
Dimensions of pot-cores made of magnetic oxides and associated Parts 磁性氧化物制成的罐形磁心及其附件的尺寸 |
China National Standards Parts |
English PDF |
| GB/T 6075.3-2011 |
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating Parts - Part 3：Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ 机械振动 在非旋转部件上测量评价机器的振动 第3部分：额定功率大于15kW额定转速在120 r/min至15000r/min之间的在现场测量的工业机器 |
China National Standards Parts |
English PDF |
| GB/T 14598.2-2011 |
Measuring relays and protection equipment - Parts 1: Common requirments 量度继电器和保护装置 第1部分：通用要求 |
China National Standards Parts |
English PDF |
| GB/T 26988-2011 |
Marks for recoverability of automobile Parts 汽车部件可回收利用性标识 |
China National Standards Parts |
English PDF |
| GB/T 26646-2011 |
Non-destructive testing - Test method of acoustic emission testing of small Parts 无损检测 小型部件声发射检测方法 |
China National Standards Parts |
English PDF |
| GB/T 25920-2010 |
Plastic body and pressured Parts of the meter for cold potable water - Technical specifications 饮用冷水水表塑料表壳及承压件技术规范 |
China National Standards Parts |
English PDF |
| GB/T 3098.8-2010 |
Mechanical properties of fasteners - Parts for bolted connections for use at temperatures from -200℃～+700℃ 紧固件机械性能 -200℃～+700℃使用的螺栓连接零件 |
China National Standards Parts |
English PDF |
| GB/T 25969-2010 |
Specification of material selecting for main Parts of domestic solar water heating system 家用太阳能热水系统主要部件选材通用技术条件 |
China National Standards Parts |
English PDF |
| GB/T 25744-2010 |
Metallographic examination for carburizing quenching and tempering of steel Parts 钢件渗碳淬火回火金相检验 |
China National Standards Parts |
English PDF |
| GB/T 25743-2010 |
Cryogenic treatment of steel Parts 钢件深冷处理 |
China National Standards Parts |
English PDF |
| GB/T 25840-2010 |
Guidance concerning the permissible temperature rise for Parts of electrical equipment, in particular for terminals 规定电气设备部件（特别是接线端子）允许温升的导则 |
China National Standards Parts |
English PDF |
| GB/T 17645.511-2010 |
Industrial automation systems and integration - Parts library - Part 511: Mechanical systems and components for general use：Reference dictionary for fasteners 工业自动化系统与集成 零件库 第511部分：机械系统与通用件：紧固件参考字典 |
China National Standards Parts |
English PDF |
| GB/T 25376-2010 |
Metal-cutting machine tools - General specifications of machining Parts 金属切削机床 机械加工件通用技术条件 |
China National Standards Parts |
English PDF |
| GB/T 22970-2010 |
Textile fabrics coding - Parts of chemical fibre 纺织面料编码 化纤部分 |
China National Standards Parts |
English PDF |
| GB/T 24744-2009 |
Geometrical product specifications (GPS) - Drawing indications for moulded Parts in technical product documentation (TPD) 产品几何规范(GPS) 技术产品文件(TPD)中模制件的表示法 |
China National Standards Parts |
English PDF |
| GB/T 24743-2009 |
Technical product documentation - Heat treated ferrous Parts presentation and indications 技术产品文件 钢铁零件热处理表示法 |
China National Standards Parts |
English PDF |
| GB/T 24741.2-2009 |
Technical drawings - Simplified representation of the assembly of Parts with fasteners - Prat 2: Rivets for aerospace equipment 技术制图 紧固组合的简化表示法 第2部分：航空航天设备用铆钉 |
China National Standards Parts |
English PDF |
| GB/T 24741.1-2009 |
Technical drawings - Simplified representation of the assembly of Parts with fasteners - Part 1: General principles 技术制图 紧固组合的简化表示法 第1部分：一般原则 |
China National Standards Parts |
English PDF |
| GB/T 24739-2009 |
Mechanical drawings - Representation for declining component of mechanical Parts 机械制图 机件上倾斜结构的表示法 |
China National Standards Parts |
English PDF |
| GB/T 24667.2-2009 |
Agricultural machinery - Guards for moving Parts of power transmission - Guard opening with tool 农业机械 使用工具打开的动力传动运动件防护装置 |
China National Standards Parts |
English PDF |
| GB/T 24667.1-2009 |
Agricultural machinery - Guards for moving Parts of power transmission - Guard opening without tool 农业机械 不使用工具打开的动力传动运动件防护装置 |
China National Standards Parts |
English PDF |
| GB/T 24608-2009 |
Inspection rules for rolling bearings and commercial Parts 滚动轴承及其商品零件检验规则 |
China National Standards Parts |
English PDF |
| GB/T 24467-2009 |
The rules of constitute hierarchy for product data dictionary of general mechanical Parts and components 通用机械零部件产品数据字典层次结构的构成规则 |
China National Standards Parts |
English PDF |
| GB/T 23913.5-2009 |
Fire-resisting compartment of composite rock wool panel - Part 5: Plastic decoration Parts 复合岩棉板耐火舱室 第5部分：塑料装饰件 |
China National Standards Parts |
English PDF |
| GB/T 23570-2009 |
Welding Parts for metal cutting machines - General specifications 金属切削机床焊接件 通用技术条件 |
China National Standards Parts |
English PDF |
| GB/T 11038-2009 |
Welding specification for pressure Parts of marine auxiliary boiler and pressure vessel 船用辅锅炉及压力容器受压元件焊接技术条件 |
China National Standards Parts |
English PDF |
| GB/T 22776-2008 |
Tolerances and fits for timekeeping instruments - Tolerances of plastic Parts 计时仪器用公差与配合 塑料件公差 |
China National Standards Parts |
English PDF |
| GB/T 22633-2008 |
Terms of housing Parts 住宅部品术语 |
China National Standards Parts |
English PDF |
| GB/T 22560-2008 |
Gas nitrocarburizing of iron and steel Parts 钢铁件的气体氮碳共渗 |
China National Standards Parts |
English PDF |
| GB/T 22472-2008 |
Tests for flammability of plastic materials for Parts in devices and appliances 仪表和设备部件用塑料的燃烧性测定 |
China National Standards Parts |
English PDF |
| GB/T 17645.25-2008 |
Industrial automation systems and integration - Parts library - Part 25: Logical resources: Logical model of supplier library with aggregate values and explicit content 工业自动化系统与集成 零件库 第25部分：逻辑资源：带聚合值和显式内容的供应商库逻辑模型 |
China National Standards Parts |
English PDF |
| GB/T 17645.102-2008 |
Industrial automation systems and integration - Parts library - Part 102: View exchange protocol by ISO 10303 conforming specification 工业自动化系统与集成 零件库 第102部分：符合GB/T 16656一致性规范的视图交换协议 |
China National Standards Parts |
English PDF |
| GB/T 17645.101-2008 |
Industrial automation systems and integration - Parts library - Part 101: Geometrical view exchange protocol by parametric program 工业自动化系统与集成 零件库 第101部分：参数化程序的几何视图交换协议 |
China National Standards Parts |
English PDF |
| GB/T 6403.4-2008 |
Rounding and chamfer of Parts 零件倒圆与倒角 |
China National Standards Parts |
English PDF |
| GB/T 11920-2008 |
General specification of central control equipment and system for electrical Parts in power stations and substations 电站电气部分集中控制设备及系统通用技术条件 |
China National Standards Parts |
English PDF |
| GB 5296.7-2008 |
Instructions for use of products of consumer interest - Parts 7: Sports equipment 消费品使用说明 第7部分：体育器材 |
China National Standards Parts |
English PDF |
| GB/T 16855.1-2008 |
Safety of machinery - Safety-related Parts of control systems - Part 1: General principles for design 机械安全 控制系统有关安全部件 第1部分：设计通则 |
China National Standards Parts |
English PDF |
| GB/T 14486-2008 |
Dimensional tolerances for moulded plastic Parts 塑料模塑件尺寸公差 |
China National Standards Parts |
English PDF |
| GB/T 22264.1-2008 |
Mounted digital display electric measuring instruments - Part1: Definitions and general requirements common to all Parts 安装式数字显示电测量仪表 第1部分：定义和通用要求 |
China National Standards Parts |
English PDF |
| GB/T 17645.1-2008 |
Industrial automation systems and integration - Parts library - Part 1: Overview and fundamental principles 工业自动化系统与集成 零件库 第1部分: 综述与基本原理 |
China National Standards Parts |
English PDF |
| GB/T 6877-2008 |
Classification, terminology and numbering for Parts and assemblies of the time measuring instruments - Classification, terminology and numbering for parts and assemblies of mechanical wrist watch movements 计时仪器零部件分类、名称和编号 机械手表机心零部件分类、名称和编号 |
China National Standards Parts |
English PDF |
| GB/T 11807-2008 |
Acoustic monitoring systems for loose Parts detection - Characteristics, design and operational procedures 探查松脱零件的声学监测系统的特性、设计和运行程序 |
China National Standards Parts |
English PDF |
| GB/T 3229-2008 |
Assembly tools for screws and nuts - Drive ends for hand and machine operated screwdriver bits and connecting Parts - Dimensions, torque testing 螺栓螺母用装配工具 手动和机动螺刀头的传动端和连接部件的尺寸及扭矩试验 |
China National Standards Parts |
English PDF |
| GB/T 12611-2008 |
Technical requirements of quality control for metal Parts to be coated 金属零（部）件镀覆前质量控制技术要求 |
China National Standards Parts |
English PDF |
| GB/T 22125-2008 |
The operation and management regulations for the enterprises of marketing automobile Parts 汽车配件营销企业经营管理规范 |
China National Standards Parts |
English PDF |
| GB/T 18177-2008 |
Gas nitriding of steel Parts 钢件的气体渗氮 |
China National Standards Parts |
English PDF |
| GB/T 16924-2008 |
Quenching and tempering of steel Parts 钢件的淬火与回火 |
China National Standards Parts |
English PDF |
| GB/T 16923-2008 |
Normalizing and annealing of steel Parts 钢件的正火与退火 |
China National Standards Parts |
English PDF |
| GB/T 14993-2008 |
Hot-rolled superalloy bars for rotating Parts 转动部件用高温合金热轧棒材 |
China National Standards Parts |
English PDF |
| GB 21748-2008 |
Safety requirement for the educational equipment - Basic requirements for equipment and spare Parts 教学仪器设备安全要求 仪器和零部件的基本要求 |
China National Standards Parts |
English PDF |
| GB/T 2804-2008 |
Modular Parts of fixture construction ；general features，profiles and dimensions 组合夹具元件结构要素 |
China National Standards Parts |
English PDF |
| GB/T 20982.3-2007 |
Textile machinery and accessories - Weaving machines - Part 3: Parts of the machine - Vocabulary 纺织机械与附件 织机 第3部分：织机零部件 词汇 |
China National Standards Parts |
English PDF |
| GB/T 14805.1-2007 |
Electronic data interchange for administration,commerce andtransport (EDIFACT) - Application level syntax rules (Syntax version number: 4，Syntax release number:1) - Part 1: Syntax rules common to all Parts 行政、商业和运输业电子数据交换(EDIFACT) 应用级语法规则(语法版本号: 4，语法发布号:1) 第1部分：公用的语法规则 |
China National Standards Parts |
English PDF |
| GB/T 16855.2-2007 |
Safety of machinery - Safety-related Parts of control systems - Part 2: Validation 机械安全 控制系统有关安全部件 第2部分：确认 |
China National Standards Parts |
English PDF |
| GB/T 20874-2007 |
Calculation of the effective parameters of magnetic piece Parts 磁性零件有效参数的计算 |
China National Standards Parts |
English PDF |
| GB/T 20873-2007 |
PM-cores made of magnetic oxides and associated Parts-dimensions 磁性氧化物制成的PM磁心及其附件的尺寸 |
China National Standards Parts |
English PDF |
| GB/T 20708-2006 |
Limit and determination of Parts of harmful substances in textile auxiliaries 纺织助剂产品中部分有害物质的限量及测定 |
China National Standards Parts |
English PDF |
| GB/T 20467-2006 |
Flexible cellular polymeric materials - Moulded and extruded sponge or expanded cellular rubber products - Compressibility test on finished Parts 软质泡沫聚合材料 模压和挤出海绵胶制品 成品的压缩性能试验 |
China National Standards Parts |
English PDF |
| GB/T 20110-2006 |
Hydraulic fluid power - Cleanliness of Parts and components - Inspection document and principles related to contaminant collection,analysis and data reporting 液压传动 零件和元件的清洁度 与污染物的收集、分析和数据报告相关的检验文件和准则 |
China National Standards Parts |
English PDF |
| GB/T 9451-2005 |
Determination of total or effective thickness of thin surface hardened layers of steel Parts 钢件薄表面总硬化层深度或有效硬化层深度的测定 |
China National Standards Parts |
English PDF |
| GB/T 11354-2005 |
Determination of nitrided case depth and metallographic microstructure examination for steel iron Parts 钢铁零件 渗氮层深度测定和金相组织检验 |
China National Standards Parts |
English PDF |
| GB/T 16855.100-2005 |
Safety of machinery-Safety-related Parts of control systems-Part 100:Guidelines for the use and application of GB/T 16855.1 机械安全 控制系统有关安全部件 第100部分:GB/T 16855.1的应用指南 |
China National Standards Parts |
English PDF |
| GB/T 7761-2003 |
Rubber--Determination of adhesion to rigid materials using conical shaped Parts 橡胶 用锥形件测定与刚性材料的粘合强度 |
China National Standards Parts |
English PDF |
| GB/T 17645.24-2003 |
Industrial automation systems and integration--Parts library--Part 24: Logical resources: Logical model of supplier library 工业自动化系统与集成 零件库 第24部分: 逻辑资源: 供应商库的逻辑模型 |
China National Standards Parts |
English PDF |
| GB/T 19045-2003 |
Preparation of Parts lists 明细表的编制 |
China National Standards Parts |
English PDF |
| GB/T 18875-2002 |
Cranes--Spare Parts manual 起重机 备件手册 |
China National Standards Parts |
English PDF |
| GB/T 6075.6-2002 |
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating Parts--Part 6:Reciprocating machines with power ratings above 100kW 在非旋转部件上测量和评价机器的机械振动 第6部分:功率大于100kW的往复式机器 |
China National Standards Parts |
English PDF |
| GB/T 6075.5-2002 |
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating Parts--Part 5:Machine sets in hydraulic power generating and pumping plants 在非旋转部件上测量和评价机器的机械振动 第5部分:水力发电厂和泵站机组 |
China National Standards Parts |
English PDF |
| GB/T 18717.2-2002 |
Ergonomic design for the safety of machinery--Part 2:Principles for determining the dimensions required for openings for access of Parts of the body into machinery 用于机械安全的人类工效学设计 第2部分:人体局部进入机械的开口尺寸确定原则 |
China National Standards Parts |
English PDF |
| GB/T 17645.20-2002 |
Industrial automation systems and integration--Parts library--Part 20:Logical resource:Logical model of expressions 工业自动化系统与集成 零件库 第20部分:逻辑资源:表达式的逻辑模型 |
China National Standards Parts |
English PDF |
| GB/T 18683-2002 |
Laser surface hardening of iron and steel Parts 钢铁件激光表面淬火 |
China National Standards Parts |
English PDF |
| GB/T 6807-2001 |
Specifications for phosphating treatment of iron and steel Parts before painting 钢铁工件涂装前磷化处理技术条件 |
China National Standards Parts |
English PDF |
| GB/T 2-2001 |
Fasteners--Ends of Parts with external thread 紧固件 外螺纹零件的末端 |
China National Standards Parts |
English PDF |
| GB/T 18376.3-2001 |
Grades of cemented carbide--Part 3:grades of cemented carbide for wear Parts 硬质合金牌号 第3部分:耐磨零件用硬质合金牌号 |
China National Standards Parts |
English PDF |
| GB/T 6075.4-2001 |
Mechanical vibration--Evaluation of machine vibration by measurementson non-rotating Parts--Part 4:Gas turbine driven sets excluding aircraft derivatives 在非旋转部件上测量和评价机器的机械振动 第4部分:不包括航空器类的燃气轮机驱动装置 |
China National Standards Parts |
English PDF |
| GB/T 3367.5-2000 |
Glossary of terms for railwaylocomotive--Names of component Parts for air brake equipment 铁道机车名词术语 空气制动装置零部件名词 |
China National Standards Parts |
English PDF |
| GB/T 3367.4-2000 |
Glossary of termsfor railway locomotive--Names of component Parts for diesel locomotive body andbogie 铁道机车名词术语 内燃机车车体和转向架零部件名词 |
China National Standards Parts |
English PDF |
| GB/T 3367.3-2000 |
Glossary of terms for railway locomotive--Names of component Parts for diesel locomotive auxiliary device 铁道机车名词术语 内燃机车辅助装置零部件名词 |
China National Standards Parts |
English PDF |
| GB/T 3367.2-2000 |
Glossary of terms for railwaylocomotive--Names of component Parts for hydraulic transmission system 铁道机车名词术语 液力传动系统零部件名词 |
China National Standards Parts |
English PDF |
| GB/T 3367.1-2000 |
Glossary of terms for railway locomotive--Names of component Parts for diesel engine 铁道机车名词术语 柴油机零部件名词 |
China National Standards Parts |
English PDF |
| GB/T 18029-2000 |
Wheelchairs--Resistance to ignition of upholstered Parts--Requirements and test methods 轮椅车 座(靠)垫阻燃性的要求和测试方法 |
China National Standards Parts |
English PDF |
| GB/T 17645.26-2000 |
Industrial automation systems and integration--Parts library--Part 26:Information supplier identification 工业自动化系统与集成 零件库 第26部分:信息供应商标识 |
China National Standards Parts |
English PDF |
| GB/T 17645.31-1998 |
Industrial automation systems and integration--Parts library--Part 31:Implementation resources:Geometric programming interface 工业自动化系统与集成 零件库 第31部分:实现资源:几何编程接口 |
China National Standards Parts |
English PDF |
| GB/T 7676.1-1998 |
Direct acting indicating analogue electrical measuring instruments and their accessories--Part 1:Definition and general requirements common to all Parts 直接作用模拟指示电测量仪表及其附件 第1部分:定义和通用要求 |
China National Standards Parts |
English PDF |
| GB 12265.3-1997 |
Safety of machinery--Minimum gaps to avoid crushing of Parts of the human body 机械安全 避免人体各部位挤压的最小间距 |
China National Standards Parts |
English PDF |
| GB/T 16892-1997 |
Geometrical tolerancing indication of non-rigid Parts 形状和位置公差 非刚性零件注法 |
China National Standards Parts |
English PDF |
| GB/T 16738-1997 |
Road vehicler--World Parts manufacturer identifier (WPMI) code 道路车辆 世界零件制造厂识别代号(WPMI) |
China National Standards Parts |
English PDF |
| GB/T 3029-1996 |
Specification of Parts for ships’ ventilation 船用通风附件技术条件 |
China National Standards Parts |
English PDF |
| GB/T 4459.1-1995 |
Mechanical drawings--Representation of screw threads and threaded Parts 机械制图 螺纹及螺纹紧固件表示法 |
China National Standards Parts |
English PDF |
| GB/T 15147-1994 |
Liquid penetrant examination for component Parts of nuclear fuel assemblies 核燃料组件零部件的渗透检验方法 |
China National Standards Parts |
English PDF |
| GB/T 14521.3-1993 |
Terms of conveying machinery--Unit and component Parts 运输机械术语 装置和零部件 |
China National Standards Parts |
English PDF |
| GB/T 14234-1993 |
Surface roughness for plastic Parts 塑料件表面粗糙度 |
China National Standards Parts |
English PDF |
| Find out:212Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
