Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43288-2023 |
Plastics. Soil biodegradable materials for agricultural and horticultural mulch films. Requirements and test methods for biodegradability, ecotoxicity and composition control. {译} 塑料 农业和园艺地膜用土壤生物降解材料 生物降解性能、生态毒性和成分控制的要求和试验方法 |
China National Standards Plastic Methods test |
 English PDF |
| GB/T 41312.3-2023 |
Permeability testing methods for equipment used in chemical industry Part 3: Plastics and their lining equipment {译} 化工用设备渗透性检测方法 第3部分：塑料及其衬里设备 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 41312.2-2023 |
Permeability testing methods for chemical industry equipment Part 2: Fiber reinforced thermosetting plastic equipment {译} 化工用设备渗透性检测方法 第2部分：纤维增强热固性塑料设备 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 18950-2023 |
Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties. {译} 橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 42764-2023 |
Plastics - Evaluation of the intrinsic aerobic biodegradability of materials exposed to marine inoculum under laboratory mesophilic conditions - Test methods and requirements {译} 塑料 在实验室中温条件下暴露于海洋接种物的材料固有需氧生物分解能力评估 试验方法与要求 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 4937.32-2023 |
Semiconductor devices - Methods of mechanical and climatic tests - Part 32: Flammability of plastic encapsulated devices (externally induced) {译} 半导体器件 机械和气候试验方法 第32部分：塑封器件的易燃性（外部引起的） |
China National Standards Plastic Methods test |
English PDF |
| GB/T 4937.31-2023 |
Semiconductor devices - Methods of mechanical and climatic tests - Part 31: Flammability of plastic encapsulated devices (internal origin) {译} 半导体器件 机械和气候试验方法 第31部分：塑封器件的易燃性（内部引起的） |
China National Standards Plastic Methods test |
English PDF |
| GB/T 18743.1-2022 |
Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 1: General test methods {译} 热塑性塑料管材 简支梁冲击强度的测定 第1部分：通用试验方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 16422.4-2022 |
Plastics - laboratory light source exposure test methods - Part 4: open carbon arc lamps {译} 塑料 实验室光源暴露试验方法 第4部分：开放式碳弧灯 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 16422.3-2022 |
Plastics - laboratory light source exposure test methods - Part 3: fluorescent ultraviolet lamps {译} 塑料 实验室光源暴露试验方法 第3部分：荧光紫外灯 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 16422.2-2022 |
Plastics - laboratory light source exposure test methods - Part 2: Xenon arc lamps {译} 塑料 实验室光源暴露试验方法 第2部分：氙弧灯 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 41929-2022 |
Plastics - epoxy resins - test methods {译} 塑料 环氧树脂 试验方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 1038.2-2022 |
Plastics - Films and sheets - Test methods for gas permeability - Part 2: Equal pressure method {译} 塑料制品 薄膜和薄片 气体透过性试验方法 第2部分：等压法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 1038.1-2022 |
Plastics - Films and sheets - Test methods for gas permeability - Part 1: Differential pressure method {译} 塑料制品 薄膜和薄片 气体透过性试验方法 第1部分：差压法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 40440-2021 |
Plastics—Extruded sheets of impact-modified acrylonitrile-styrene copolymers(ABS,AEPDS and ASA)—Requirements and test methods 塑料制品 抗冲击改性丙烯腈-苯乙烯共聚物(ABS、AEPDS和ASA)挤出板材 要求和试验方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 40120-2021 |
Agricultural irrigation equipment—Thermoplastic collapsible hoses for irrigation—Specifications and test methods 农业灌溉设备 灌溉用热塑性可折叠软管 技术规范和试验方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 39937-2021 |
Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods 塑料制品 聚丙烯(PP)挤塑板材 要求和试验方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 39936-2021 |
Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods 深冷保冷用泡沫塑料 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 41061-2021 |
Test methods for creep properties of fiber reinforced plastics 纤维增强塑料蠕变性能试验方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 40872-2021 |
Plastics—Test methods of polyethylene cellular 塑料 聚乙烯泡沫试验方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 13542.2-2021 |
Plastic films for electrical purposes—Part 2:Methods of test 电气绝缘用薄膜 第2部分：试验方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 38787-2020 |
Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials 塑料 材料生物分解试验用样品制备方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 4937.20-2018 |
Semiconductor devices—Mechanical and climatic test methods—Part 20: Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat 半导体器件 机械和气候试验方法 第20部分：塑封表面安装器件耐潮湿和焊接热综合影响 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 35804-2018 |
Rubber, vulcanized or thermoplastic－Resistance to ozone cracking－Test methods for determining the ozone concentration in laboratory test chambers 硫化橡胶或热塑性橡胶 耐臭氧龟裂 测定试验箱中臭氧浓度的试验方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 35382-2017 |
Test methods for energy consumption of blow moulding machines for plastics 塑料中空成型机能耗检测方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 33580-2017 |
Testing and measuring methods of energy consumption for rubber and plastics extruder 橡胶塑料挤出机能耗检测方法 |
China National Standards Plastic Methods test |
English PDF |
| GB 29993-2013 |
Rubber and/or plastics hoses and hoses assemblies for domestic gas-technical requirements and testing methods 家用燃气用橡胶和塑料软管及软管组合件技术条件和评价方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 27797.4-2013 |
Fibre-reinforced plastics - Methods of producing test plates - Part 4：Moulding of prepregs 纤维增强塑料 试验板制备方法 第4部分：预浸料模塑 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 29418-2012 |
Test methods for mechannical and physical properties of wood-plastic composite product 塑木复合材料产品物理力学性能测试 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 29365-2012 |
Wood-Plastic Composite (WPC) - Test methods of artificial weathering 塑木复合材料 人工气候老化试验方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 28765-2012 |
Packaging material - Test methods for organic vapor transmission rate for plastic film, sheet and package 包装材料 塑料薄膜、片材和容器的有机气体透过率试验方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 27797.9-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 9:Moulding of GMT/STC 纤维增强塑料 试验板制备方法 第9部分：GMT/STC模塑 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 27797.8-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC 纤维增强塑料 试验板制备方法 第8部分：SMC及BMC模塑 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 27797.7-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding 纤维增强塑料 试验板制备方法 第7部分：树脂传递模塑 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 27797.6-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding 纤维增强塑料 试验板制备方法 第6部分：拉挤模塑 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 27797.5-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 5: Filament winding 纤维增强塑料 试验板制备方法 第5部分：缠绕成型 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 27797.3-2011 |
Fibre-reinforced plastics - Methodsof producing test plates - Part 3: Wet compression moulding 纤维增强塑料 试验板制备方法 第3部分：湿法模塑 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 27797.2-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding 纤维增强塑料 试验板制备方法 第2部分：接触和喷射模塑 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 27797.1-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions 纤维增强塑料 试验板制备方法 第1部分：通则 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 27797.11-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates 纤维增强塑料 试验板制备方法 第11部分：BMC和其他长纤维模塑料注射模塑 小方片 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 27797.10-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens 纤维增强塑料 试验板制备方法 第10部分：BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 27726-2011 |
Thermoplastics valves - Pressure test methods and requirements 热塑性塑料阀门压力试验方法及要求 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 23654-2009 |
Rubber，vulcanized and thermoplastic - Preformed gaskets used in buildings - Classification，specification and test methods 硫化橡胶和热塑性橡胶 建筑用预成型密封条的分类、要求和试验方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 23296.1-2009 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and th 食品接触材料 塑料中受限物质 塑料中物质向食品及食品模拟物特定迁移试验和含量测定方法以及食品模拟物暴露条件选择的指南 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 11793-2008 |
Test methods on mechanical and weathering properties for unplasticized polyvinyl chloride (PVC-U) doors and windows 未增塑聚氯乙烯（PVC-U）塑料门窗力学性能及耐候性试验方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 11547-2008 |
Plastic - Methods of test for the determination of the effects of immersion in liquid chemicals 塑料 耐液体化学试剂性能的测定 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 21333-2008 |
Cellular plastics,rigid - Test methods for self-skinned,high-density materials 硬质泡沫塑料 自结皮高密度材料试验方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 3048.3-2007 |
Test methods for electrical properties of electric cables and wires - Part 3：Test of volume resistivity of semi-conducting rubbers and plastics 电线电缆电性能试验方法 第3部分：半导电橡塑材料体积电阻率试验 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 328.9-2007 |
Test methods for building sheets for waterproofing - Part 9: Plastic and rubber sheets for waterproofing-tensile properties 建筑防水卷材试验方法 第9部分：高分子防水卷材 拉伸性能 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 328.7-2007 |
Test methods for building sheets for waterproofing - Part 7: Plastic and rubber sheets for waterproofing-length,width,straightness and flatness 建筑防水卷材试验方法 第7部分：高分子防水卷材 长度、宽度、平直度和平整度 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 328.5-2007 |
Test methods for building sheets for waterproofing - Part 5: Plastic and rubber sheets for waterproofing-thickness and mass per unit area 建筑防水卷材试验方法 第5部分：高分子防水卷材 厚度、单位面积质量 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 328.3-2007 |
Test methods for building sheets for waterproofing - Part 3: Plastic and rubber sheets for waterproofing-visible defects 建筑防水卷材试验方法 第3部分：高分子防水卷材 外观 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 328.27-2007 |
Test methods for building sheets for waterproofing - Part 27: Bitumen,plastic and rubber sheets for waterproofing-water absorption 建筑防水卷材试验方法 第27部分：沥青和高分子防水卷材 吸水性 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 328.25-2007 |
Test methods for building sheets for waterproofing - part 25: Bitumen,plastic and rubber sheets for waterproofing-resistance to static loading 建筑防水卷材试验方法 第25部分：沥青和高分子防水卷材 抗静态荷载 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 328.24-2007 |
Test methods for building sheets for waterproofing - Part 24: Bitumen,plastic and rubber sheets for waterproofing-resistance to impact 建筑防水卷材试验方法 第24部分：沥青和高分子防水卷材 抗冲击性能 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 328.23-2007 |
Test methods for building sheets for waterproofing - Part 23: Plastic and rubber sheets for waterproofing-resistance to shearing of joints 建筑防水卷材试验方法 第23部分：高分子防水卷材 接缝剪切性能 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 328.19-2007 |
Test methods for building sheets for waterproofing - Part 19: Plastic and rubber sheets for waterproofing-resistance to tearing 建筑防水卷材试验方法 第19部分：高分子防水卷材 撕裂性能 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 328.16-2007 |
Test methods for building sheets for waterproofing - Part 16: Plastic and rubber sheets for waterproofing-exposure to liquid chemicals including water 建筑防水卷材试验方法 第16部分：高分子防水卷材 耐化学液体（包括水） |
China National Standards Plastic Methods test |
English PDF |
| GB/T 328.15-2007 |
Test methods for building sheets for waterproofing - Part 15: Plastic and rubber sheets for waterproof-foldability at low temperature 建筑防水卷材试验方法 第15部分：高分子防水卷材 低温弯折性 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 328.13-2007 |
Test methods for building sheets for waterproofing - Part 13: Plastic and rubber sheets for waterproofing-dimensional stability 建筑防水卷材试验方法 第13部分：高分子防水卷材 尺寸稳定性 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 328.1-2007 |
Test methods for building sheets for waterproofing - Part 1: Bitumen,plastic and rubber sheets for waterproofing-rules for sampling 建筑防水卷材试验方法 第1部分：沥青和高分子防水卷材 抽样规则 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 328.10-2007 |
Test methods for building sheets for waterproofing - Part 10: Bitumen,plastic and rubber sheets for waterproofing-watertightness 建筑防水卷材试验方法 第10部分：沥青和高分子防水卷材 不透水性 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 1463-2005 |
Test methods for density and relative density of fiber reinforced plastics 纤维增强塑料密度和相对密度试验方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 1462-2005 |
Test methods for water absorption of fiber reinforced plastics 纤维增强塑料吸水性试验方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 19687-2005 |
Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods) 闭孔塑料长期热阻变化的测定 实验室加速测试方法 |
China National Standards Plastic Methods test |
English PDF |
| GB/T 19243-2003 |
Rubber，vulcanized or thermoplastic--Methods of test for staining in contact with organic material 硫化橡胶或热塑性橡胶与有机物接触污染的试验方法 |
China National Standards Plastic Methods test |
English PDF |
| Find out:66Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
