China National Standards

China Plastics GB Standards List


  •  China "Plastics " GB Standards List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 43289-2023 Plastics. Test method for determining the rate of decomposition and extent of disintegration of plastic materials in matrices exposed to the marine environment under laboratory conditions. {译}
    塑料 实验室条件下测定暴露于海洋环境基质中塑料材料分解率和崩解程度的试验方法
    China National Standards
    Plastics

    English PDF
    GB/T 43288-2023 Plastics. Soil biodegradable materials for agricultural and horticultural mulch films. Requirements and test methods for biodegradability, ecotoxicity and composition control. {译}
    塑料 农业和园艺地膜用土壤生物降解材料 生物降解性能、生态毒性和成分控制的要求和试验方法
    China National Standards
    Plastics

    English PDF
    GB/T 43287-2023 Plastics Determination of the degree of disintegration of plastic materials in the marine environment under actual field conditions {译}
    塑料 在实际野外条件海洋环境中塑料材料崩解度的测定
    China National Standards
    Plastics

    English PDF
    GB/T 43282.2-2023 Plastics. Determination of aerobic biodegradation of plastic materials exposed to seawater. Part 2: Method for determination of oxygen demand in a closed respirometer. {译}
    塑料 暴露于海水中塑料材料需氧生物分解的测定 第2部分:采用测定密闭呼吸计内需氧量的方法
    China National Standards
    Plastics

    English PDF
    GB/T 43282.1-2023 Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Part 1: Using methods to analyze the release of carbon dioxide. {译}
    塑料 暴露于海水中塑料材料需氧生物分解的测定 第1部分:采用分析释放二氧化碳的方法
    China National Standards
    Plastics

    English PDF
    GB/T 43275-2023 Screening and determination of antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium in toy Plastics by energy dispersive X-ray fluorescence spectrometry {译}
    玩具塑料中锑、砷、钡、镉、铬、铅、汞、硒元素的筛选测定 能量色散X射线荧光光谱法
    China National Standards
    Plastics

    English PDF
    GB/T 41312.3-2023 Permeability testing methods for equipment used in chemical industry Part 3: Plastics and their lining equipment {译}
    化工用设备渗透性检测方法 第3部分:塑料及其衬里设备
    China National Standards
    Plastics

    English PDF
    GB/T 43355-2023 Determination of antiviral activity on surfaces of Plastics and other non-porous materials {译}
    塑料和其他无孔材料表面抗病毒活性的测定
    China National Standards
    Plastics

    English PDF
    GB/T 43316.6-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 6: Slow strain rate method {译}
    塑料 耐环境应力开裂(ESC)的测定 第6部分:慢应变速率法
    China National Standards
    Plastics

    English PDF
    GB/T 43316.5-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 5: Constant tensile deformation method {译}
    塑料 耐环境应力开裂(ESC)的测定 第5部分:恒定拉伸变形法
    China National Standards
    Plastics

    English PDF
    GB/T 43316.4-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 4: Ball or pin pressure method {译}
    塑料 耐环境应力开裂(ESC)的测定 第4部分:球压或针压法
    China National Standards
    Plastics

    English PDF
    GB/T 43316.3-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 3: Bending method {译}
    塑料 耐环境应力开裂(ESC)的测定 第3部分:弯曲法
    China National Standards
    Plastics

    English PDF
    GB/T 43316.2-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 2: Constant tensile load method {译}
    塑料 耐环境应力开裂(ESC)的测定 第2部分:恒定拉伸负荷法
    China National Standards
    Plastics

    English PDF
    GB/T 43316.1-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 1: General principles {译}
    塑料 耐环境应力开裂(ESC)的测定 第1部分:通则
    China National Standards
    Plastics

    English PDF
    GB/T 43297-2023 Plastics—Methods for evaluating photoaging properties of polymers—Fourier transform infrared spectroscopy and UV/visible spectroscopy {译}
    塑料 聚合物光老化性能评估方法 傅里叶红外光谱和紫外/可见光谱法
    China National Standards
    Plastics

    English PDF
    GB/T 42918.2-2023 Plastics - Thermoplastic polyurethanes for molding and extrusion - Part 2: Specimen preparation and property determination {译}
    塑料 模塑和挤出用热塑性聚氨酯 第2部分:试样制备和性能测定
    China National Standards
    Plastics

    English PDF
    GB/T 31402-2023 Determination of antimicrobial activity on surfaces of Plastics and other non-porous materials {译}
    塑料和其他无孔材料表面抗菌活性的测定
    China National Standards
    Plastics

    English PDF
    GB/T 21461.2-2023 Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 2: Specimen preparation and property determination {译}
    塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分:试样制备和性能测定
    China National Standards
    Plastics

    English PDF
    GB/T 21461.1-2023 Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 1: Nomenclature system and basis for classification {译}
    塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第1部分:命名系统和分类基础
    China National Standards
    Plastics

    English PDF
    GB/T 43086-2023 Plastics Polymer dispersions Determination of sieve residue {译}
    塑料 聚合物分散体 筛余物的测定
    China National Standards
    Plastics

    English PDF
    GB/T 43085-2023 Plastics Polymer dispersions Determination of free formaldehyde content {译}
    塑料 聚合物分散体 游离甲醛含量的测定
    China National Standards
    Plastics

    English PDF
    GB/T 43084.2-2023 Plastics - Fluoropolymer dispersions, molding and extrusion materials - Part 2: Specimen preparation and property determination {译}
    塑料 含氟聚合物分散体、模塑和挤出材料 第2部分:试样制备和性能测定
    China National Standards
    Plastics

    English PDF
    GB/T 43084.1-2023 Plastics - Fluoropolymer dispersions, molding and extrusion materials - Part 1: Nomenclature system and basis for classification {译}
    塑料 含氟聚合物分散体、模塑和挤出材料 第1部分:命名系统和分类基础
    China National Standards
    Plastics

    English PDF
    GB/T 1630.2-2023 Plastics Epoxy resins Part 2: Specimen preparation and property determination of cross-linked epoxy resins {译}
    塑料 环氧树脂 第2部分:试样制备和交联环氧树脂的性能测定
    China National Standards
    Plastics

    English PDF
    GB/T 12598-2023 Plastics Ion exchange resin Determination of sphericity rate after grinding and sphericity rate after grinding {译}
    塑料 离子交换树脂 渗磨圆球率和磨后圆球率的测定
    China National Standards
    Plastics

    English PDF
    GB/T 42924.4-2023 Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 4: Dynamic decomposition method using a cone corrosion meter. {译}
    塑料 烟雾产生 燃烧流腐蚀性的测定 第4部分:使用锥形腐蚀计的动态分解法
    China National Standards
    Plastics

    English PDF
    GB/T 42924.1-2023 Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 1: General terminology and applications. {译}
    塑料 烟雾产生 燃烧流腐蚀性的测定 第1部分:通用术语和应用
    China National Standards
    Plastics

    English PDF
    GB/T 42922-2023 Plastics - Determination of organic solvent extractables - Chemical methods {译}
    塑料 有机溶剂可萃取物的测定 化学方法
    China National Standards
    Plastics

    English PDF
    GB/T 42920-2023 Plastics - Evaluation of fire resistance properties and fire performance of fiber reinforced plastic composites {译}
    塑料 纤维增强塑料复合材料耐火特性和防火性能的评定
    China National Standards
    Plastics

    English PDF
    GB/T 42919.6-2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method based on temperature modulation technology {译}
    塑料 导热系数和热扩散系数的测定 第6部分:基于温度调制技术的比较法
    China National Standards
    Plastics

    English PDF
    GB/T 42919.4-2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method {译}
    塑料 导热系数和热扩散系数的测定 第4部分:激光闪光法
    China National Standards
    Plastics

    English PDF
    GB/T 42919.3-2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method {译}
    塑料 导热系数和热扩散系数的测定 第3部分:温度波分析法
    China National Standards
    Plastics

    English PDF
    GB/T 42919.1-2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles {译}
    塑料 导热系数和热扩散系数的测定 第1部分:通则
    China National Standards
    Plastics

    English PDF
    GB/T 42918.1-2023 Plastics - Thermoplastic polyurethanes for molding and extrusion - Part 1: Nomenclature system and basis for classification {译}
    塑料 模塑和挤出用热塑性聚氨酯 第1部分:命名系统和分类基础
    China National Standards
    Plastics

    English PDF
    GB/T 33061.7-2023 Plastics - Determination of dynamic mechanical properties - Part 7: Non-resonant torsional vibration method {译}
    塑料 动态力学性能的测定 第7部分: 非共振扭转振动法
    China National Standards
    Plastics

    English PDF
    GB/T 33061.6-2023 Plastics - Determination of dynamic mechanical properties - Part 6: Non-resonant shear vibration method {译}
    塑料 动态力学性能的测定 第6部分:非共振剪切振动法
    China National Standards
    Plastics

    English PDF
    GB/T 33061.5-2023 Plastics - Determination of dynamic mechanical properties - Part 5: Non-resonant bending vibration method {译}
    塑料 动态力学性能的测定 第5部分:非共振弯曲振动法
    China National Standards
    Plastics

    English PDF
    GB/T 33061.4-2023 Plastics - Determination of dynamic mechanical properties - Part 4: Non-resonant tensile vibration method {译}
    塑料 动态力学性能的测定 第4部分: 非共振拉伸振动法
    China National Standards
    Plastics

    English PDF
    GB/T 7139-2023 Plastics. Homopolymers and copolymers of vinyl chloride. Determination of chlorine content. {译}
    塑料 氯乙烯均聚物和共聚物 氯含量的测定
    China National Standards
    Plastics

    English PDF
    GB/T 41638.3-2023 Plastics - Carbon and environmental footprints of bio-based plastics - Part 3: Requirements and guidelines for the quantification of process carbon footprints {译}
    塑料 生物基塑料的碳足迹和环境足迹 第3部分:过程碳足迹 量化要求与准则
    China National Standards
    Plastics

    English PDF
    GB/T 41638.2-2023 Plastics - Carbon and environmental footprints of bio-based plastics - Part 2: Carbon footprint of materials - Amount (mass) of CO2 incorporated into polymer molecules from the air {译}
    塑料 生物基塑料的碳足迹和环境足迹 第2部分:材料碳足迹 由空气中并入到聚合物分子中CO2的量(质量)
    China National Standards
    Plastics

    English PDF
    GB/T 42764-2023 Plastics - Evaluation of the intrinsic aerobic biodegradability of materials exposed to marine inoculum under laboratory mesophilic conditions - Test methods and requirements {译}
    塑料 在实验室中温条件下暴露于海洋接种物的材料固有需氧生物分解能力评估 试验方法与要求
    China National Standards
    Plastics

    English PDF
    GB/T 1040.2-2022 Plastics - Determination of tensile properties - Part 2: Test conditions for molded and extruded plastics {译}
    塑料 拉伸性能的测定 第2部分:模塑和挤塑塑料的试验条件
    China National Standards
    Plastics

    English PDF
    GB/T 41639-2022 Plastics Determination of disintegration rate of plastic materials under laboratory-scale simulated composting conditions {译}
    塑料 在实验室规模模拟堆肥化条件下塑料材料崩解率的测定
    China National Standards
    Plastics

    English PDF
    GB/T 41638.1-2022 Plastics - Carbon and environmental footprints of bio-based plastics - Part 1: General principles {译}
    塑料 生物基塑料的碳足迹和环境足迹 第1部分:通则
    China National Standards
    Plastics

    English PDF
    GB/T 2546.2-2022 Plastics - Polypropylene (PP) molding and extrusion materials - Part 2: Specimen preparation and property determination {译}
    塑料 聚丙烯(PP)模塑和挤出材料 第2部分:试样制备和性能测定
    China National Standards
    Plastics

    English PDF
    GB/T 2546.1-2022 Plastics - Polypropylene (PP) molding and extrusion materials - Part 1: Nomenclature system and basis of classification {译}
    塑料 聚丙烯(PP)模塑和挤出材料 第1部分:命名系统和分类基础
    China National Standards
    Plastics

    English PDF
    GB/T 18743.2-2022 ThermoPlastics pipes - Determination of impact strength of simply supported beams - Part 2: test conditions for pipes of different materials {译}
    热塑性塑料管材 简支梁冲击强度的测定 第2部分:不同材料管材的试验条件
    China National Standards
    Plastics

    English PDF
    GB/T 18743.1-2022 ThermoPlastics pipes - Determination of impact strength of simply supported beams - Part 1: General test methods {译}
    热塑性塑料管材 简支梁冲击强度的测定 第1部分:通用试验方法
    China National Standards
    Plastics

    English PDF
    GB/T 16422.4-2022 Plastics - laboratory light source exposure test methods - Part 4: open carbon arc lamps {译}
    塑料 实验室光源暴露试验方法 第4部分:开放式碳弧灯
    China National Standards
    Plastics

    English PDF
    GB/T 16422.3-2022 Plastics - laboratory light source exposure test methods - Part 3: fluorescent ultraviolet lamps {译}
    塑料 实验室光源暴露试验方法 第3部分:荧光紫外灯
    China National Standards
    Plastics

    English PDF
    GB/T 16422.2-2022 Plastics - laboratory light source exposure test methods - Part 2: Xenon arc lamps {译}
    塑料 实验室光源暴露试验方法 第2部分:氙弧灯
    China National Standards
    Plastics

    English PDF
    GB/T 41489-2022 Plastics polyamide determination by gas chromatography ε- Caprolactam and ω- Dodecalactam {译}
    塑料 聚酰胺 气相色谱法测定ε-己内酰胺和ω-十二内酰胺
    China National Standards
    Plastics

    English PDF
    GB/T 41378-2022 Plastics Blow-molded polypropylene containers for liquid food packaging {译}
    塑料 液态食品包装用吹塑聚丙烯容器
    China National Standards
    Plastics

    English PDF
    GB/T 41974.1-2022 Plastics - Color masterbatches - Part 1: Nomenclature system and basis of classification {译}
    塑料 色母料 第1部分:命名系统和分类基础
    China National Standards
    Plastics

    English PDF
    GB/T 5568-2022 Rubber or Plastics hoses and hose assemblies - Hydraulic impulse test without deflection {译}
    橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验
    China National Standards
    Plastics

    English PDF
    GB/T 8333-2022 Plastics - Test method for combustion behavior of rigid foamed plastics - Vertical combustion method {译}
    塑料 硬质泡沫塑料燃烧性能试验方法 垂直燃烧法
    China National Standards
    Plastics

    English PDF
    GB/T 41927-2022 Plastics - Thermoset molding compounds - Short-term performance evaluation at elevated temperatures {译}
    塑料 热固性模塑料 高温下的短期性能评估
    China National Standards
    Plastics

    English PDF
    GB/T 41926-2022 Plastics - Determination of 1,2-ethylene glycol content in epoxy resins {译}
    塑料 环氧树脂 1,2-乙二醇含量的测定
    China National Standards
    Plastics

    English PDF
    GB/T 41928-2022 Plastics epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC) {译}
    塑料 环氧树脂 差示扫描量热法(DSC)测定交联环氧树脂交联度
    China National Standards
    Plastics

    English PDF
    GB/T 41929-2022 Plastics - epoxy resins - test methods {译}
    塑料 环氧树脂 试验方法
    China National Standards
    Plastics

    English PDF
    GB/T 41931-2022 Plastics/Rubber Polymer Dispersions and Synthetic Rubber Latex Freeze-Thaw Cycle Stability Test {译}
    塑料/橡胶 聚合物分散体和合成橡胶胶乳 冻融循环稳定性试验
    China National Standards
    Plastics

    English PDF
    GB/T 41935-2022 Plastics - Artificial weathering with acid deposits {译}
    塑料 含酸性沉积的人工气候老化
    China National Standards
    Plastics

    English PDF
    GB/T 41932-2022 Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) method {译}
    塑料 断裂韧性(GIC和KIC)的测定 线弹性断裂力学(LEFM)法
    China National Standards
    Plastics

    English PDF
    GB/T 41933-2022 Plastics - Determination of tension-tension fatigue crack growth - Linear elastic fracture mechanics (LEFM) method {译}
    塑料 拉-拉疲劳裂纹扩展的测定 线弹性断裂力学(LEFM)法
    China National Standards
    Plastics

    English PDF
    GB/T 41934-2022 Plastics - Determination of vertical flame spread of films and sheets {译}
    塑料 薄膜和薄片垂直火焰蔓延的测定
    China National Standards
    Plastics

    English PDF
    GB/T 2406.3-2022 Plastics - Determination of combustion behavior by the oxygen index method - Part 3: High temperature test {译}
    塑料 用氧指数法测定燃烧行为 第3部分:高温试验
    China National Standards
    Plastics

    English PDF
    GB/T 11546.2-2022 Plastics - Determination of creep properties - Part 2: Three-point bending creep {译}
    塑料 蠕变性能的测定 第2部分:三点弯曲蠕变
    China National Standards
    Plastics

    English PDF
    GB/T 19466.5-2022 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction curve temperature, time, enthalpy of reaction and conversion {译}
    塑料 差示扫描量热法(DSC) 第5部分: 特征反应曲线温度、时间,反应焓和转化率的测定
    China National Standards
    Plastics

    English PDF
    GB/T 41936.2-2022 Plastics - Determination of torsional rigidity of flexible materials - Part 2: Plasticized vinyl chloride homopolymers and copolymers {译}
    塑料 柔性材料扭转刚度的测定 第2部分: 增塑氯乙烯均聚物和共聚物
    China National Standards
    Plastics

    English PDF
    GB/T 41936.1-2022 Plastics - Determination of torsional stiffness of flexible materials - Part 1: General method {译}
    塑料 柔性材料扭转刚度的测定 第1部分:通用方法
    China National Standards
    Plastics

    English PDF
    GB/T 33061.11-2022 Plastics - Determination of dynamic mechanical properties - Part 11: Glass transition temperature {译}
    塑料 动态力学性能的测定 第11部分: 玻璃化转变温度
    China National Standards
    Plastics

    English PDF
    GB/T 41937-2022 Rubber or Plastics coated fabrics-Physical-mechanical property tests-Determination of flex resistance by deflectionometer method {译}
    橡胶或塑料涂覆织物 物理机械性能试验 挠度仪法测定耐曲挠性
    China National Standards
    Plastics

    English PDF
    GB/T 41758.1-2022 Plastics - Polyketone (PK) molding and extrusion materials - Part 1: Nomenclature system and basis of classification {译}
    塑料 聚酮(PK)模塑和挤出材料 第1部分:命名系统和分类基础
    China National Standards
    Plastics

    English PDF
    GB/T 1038.2-2022 Plastics - Films and sheets - Test methods for gas permeability - Part 2: Equal pressure method {译}
    塑料制品 薄膜和薄片 气体透过性试验方法 第2部分:等压法
    China National Standards
    Plastics

    English PDF
    GB/T 1038.1-2022 Plastics - Films and sheets - Test methods for gas permeability - Part 1: Differential pressure method {译}
    塑料制品 薄膜和薄片 气体透过性试验方法 第1部分:差压法
    China National Standards
    Plastics

    English PDF
    GB/T 41792-2022 Plastics - Films and sheets - Determination of cold cracking temperature {译}
    塑料制品 薄膜和薄片 冷裂温度的测定
    China National Standards
    Plastics

    English PDF
    GB/T 41791-2022 Plastics Films and sheets Non-oriented polyethylene terephthalate (PET) sheet {译}
    塑料制品 薄膜和薄片 无取向聚对苯二甲酸乙二醇酯(PET)片材
    China National Standards
    Plastics

    English PDF
    GB/T 1844.3-2022 Plastics - Symbols and abbreviations - Part 3: Plasticizers {译}
    塑料 符号和缩略语 第3部分:增塑剂
    China National Standards
    Plastics

    English PDF
    GB/T 1844.2-2022 Plastics - Symbols and abbreviations - Part 2: Fillers and reinforcing materials {译}
    塑料 符号和缩略语 第2部分:填料和增强材料
    China National Standards
    Plastics

    English PDF
    GB/T 41709-2022 Carbon fiber reinforced Plastics - Determination of size and aspect ratio of pulverized material {译}
    碳纤维增强塑料 粉碎料尺寸和长宽比的测定
    China National Standards
    Plastics

    English PDF
    GB/T 24135-2022 Rubber or Plastics coated fabrics - Accelerated aging test {译}
    橡胶或塑料涂覆织物 加速老化试验
    China National Standards
    Plastics

    English PDF
    GB/T 1844.1-2022 Plastics - Symbols and abbreviations - Part 1: Base polymers and their characteristic properties {译}
    塑料 符号和缩略语 第1部分:基础聚合物及其特征性能
    China National Standards
    Plastics

    English PDF
    GB/T 41877.1-2022 Plastics - Ethylene-vinyl alcohol (EVOH) copolymer molding and extrusion materials - Part 1: Nomenclature system and basis of classification {译}
    塑料 乙烯-乙烯醇(EVOH)共聚物模塑和挤出材料 第1部分:命名系统和分类基础
    China National Standards
    Plastics

    English PDF
    GB/T 41877.2-2022 Plastics - Ethylene-vinyl alcohol (EVOH) copolymer molding and extrusion materials - Part 2: Specimen preparation and property determination {译}
    塑料 乙烯-乙烯醇(EVOH)共聚物模塑和挤出材料 第2部分: 试样制备和性能测定
    China National Standards
    Plastics

    English PDF
    GB/T 41878-2022 Plastics - Determination of scratch properties {译}
    塑料 划痕性能的测定
    China National Standards
    Plastics

    English PDF
    GB/T 41879-2022 Plastics - Burning behavior - Medium-scale fire tests of fiber-reinforced polymer composites {译}
    塑料 燃烧性能 纤维增强聚合物复合材料的中等尺寸耐火测试
    China National Standards
    Plastics

    English PDF
    GB/T 41880-2022 Plastics - epoxy resins - determination of electrical conductivity of aqueous extracts {译}
    塑料 环氧树脂 水萃取液电导率的测定
    China National Standards
    Plastics

    English PDF
    GB/T 41758.2-2022 Plastics - Polyketone (PK) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties {译}
    塑料 聚酮(PK)模塑和挤出材料 第2部分:试样制备和性能测定
    China National Standards
    Plastics

    English PDF
    GB/T 40611-2021 Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/ sandy sediment interface—Method by measuring the oxygen demand in closed respirometer
    塑料 海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定 通过测定密闭呼吸计内耗氧量的方法
    China National Standards
    Plastics

    English PDF
    GB/T 40440-2021 Plastics—Extruded sheets of impact-modified acrylonitrile-styrene copolymers(ABS,AEPDS and ASA)—Requirements and test methods
    塑料制品 抗冲击改性丙烯腈-苯乙烯共聚物(ABS、AEPDS和ASA)挤出板材 要求和试验方法
    China National Standards
    Plastics

    English PDF
    GB/T 40384-2021 Plastics—Determination of the transient extensional viscosity of polymer melts
    塑料 聚合物熔体瞬态拉伸黏度的测定
    China National Standards
    Plastics

    English PDF
    GB/T 40426.3-2021 Plastics—Decorative solid surfacing materials—Part 3:Determination of properties—Non-sheet solid surfacing material
    塑料制品 装饰性实体面材 第3部分:性能的测定 非板型实体面材
    China National Standards
    Plastics

    English PDF
    GB/T 40426.2-2021 Plastics—Decorative solid surfacing materials—Part 2: Determination of properties—Sheet solid surfacing material
    塑料制品 装饰性实体面材 第2部分:性能的测定 板型实体面材
    China National Standards
    Plastics

    English PDF
    GB/T 40426.1-2021 Plastics—Decorative solid surfacing materials—Part 1: Classification and specifications
    塑料制品 装饰性实体面材 第1部分:分类和规范
    China National Standards
    Plastics

    English PDF
    GB/T 40367-2021 Plastics—Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment—Method by analysis of evolved carbon dioxide
    塑料 暴露于海洋沉积物中非漂浮材料最终需氧生物分解能力的测定 通过分析释放的二氧化碳的方法
    China National Standards
    Plastics

    English PDF
    GB/T 40340-2021 Composites and metal assemblies—Galvanic corrosion tests of carbon fibre reinforced Plastics (CFRPs) related bonded or fastened structures in artificial atmospheres—Salt spray tests
    复合材料与金属组合件 碳纤维增强聚合物基复合材料胶接或紧固件连接结构人工环境下的电偶腐蚀试验 盐雾试验
    China National Standards
    Plastics

    English PDF
    GB/T 40318-2021 Plastics—Environmental aspects—General guidelines for their inclusion in standards
    塑料 环境因素 标准中环境因素的通则
    China National Standards
    Plastics

    English PDF
    GB/T 40315-2021 Plastics—Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value
    塑料 采用水溶液保持湿度恒定进行状态调节和试验的小密闭容器
    China National Standards
    Plastics

    English PDF
    GB/T 40302-2021 Plastics—Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
    塑料 立式软薄试样与小火焰源接触的燃烧性能测定
    China National Standards
    Plastics

    English PDF
    GB/T 40280-2021 Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity using a single cylinder type rotational viscometer method
    塑料 液态或乳液态或分散体系的树脂 用单筒旋转黏度计测定表观黏度
    China National Standards
    Plastics

    English PDF
    GB/T 39715.4-2021 Plastics—Biobased content—Part 4: Determination of biobased mass content
    塑料 生物基含量 第4部分:生物基物质含量的测定
    China National Standards
    Plastics

    English PDF
    GB/T 39715.3-2021 Plastics—Biobased content—Part 3:Determination of biobased synthetic polymer content
    塑料 生物基含量 第3部分:生物基合成聚合物含量的测定
    China National Standards
    Plastics

    English PDF
    GB/T 39715.2-2021 Plastics—Biobased content—Part 2: Determination of biobased carbon content
    塑料 生物基含量 第2部分:生物基碳含量的测定
    China National Standards
    Plastics

    English PDF
    GB/T 39715.1-2021 Plastics—Biobased content—Part 1: General principles
    塑料 生物基含量 第1部分:通用原则
    China National Standards
    Plastics

    English PDF
    GB/T 37199.1-2021 Plastics—Polybutene(PB) moulding and extrusion materials—Part 1:Designation system and basis for specifications
    塑料 聚丁烯(PB)模塑和挤出材料 第1部分:命名系统和分类基础
    China National Standards
    Plastics

    English PDF
    GB/T 33047.3-2021 Plastics—Thermogravimetry (TG) of polymers—Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
    塑料 聚合物热重法(TG) 第3部分:使用 Ozawa-Friedman 绘图测定活化能和分析反应动力学
    China National Standards
    Plastics

    English PDF
    GB/T 33047.2-2021 Plastics—Thermogravimetry (TG) of polymers—Part 2: Determination of activation energy
    塑料 聚合物热重法(TG) 第2部分:活化能的测定
    China National Standards
    Plastics

    English PDF
    GB/T 29047-2021 Prefabricated directly buried insulating pipes and fittings with polyurethane foamed-Plastics and high density polyethylene casing pipes
    高密度聚乙烯外护管硬质聚氨酯泡沫塑料预制直埋保温管及管件
    China National Standards
    Plastics

    English PDF
    GB/T 15596-2021 Plastics—Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
    塑料 在玻璃过滤后太阳辐射、自然气候或实验室辐射源暴露后颜色和性能变化的测定
    China National Standards
    Plastics

    English PDF
    GB/T 2408-2021 Plastics—Determination of burning characteristics—Horizontal and vertical test
    塑料 燃烧性能的测定 水平法和垂直法
    China National Standards
    Plastics

    English PDF
    GB/T 1845.2-2021 Plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
    塑料 聚乙烯(PE)模塑和挤出材料 第2部分:试样制备和性能测定
    China National Standards
    Plastics

    English PDF
    GB/T 40612-2021 Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface—Method by analysis of evolved carbon dioxide
    塑料 海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定 通过测定释放二氧化碳的方法
    China National Standards
    Plastics

    English PDF
    GB/T 40553-2021 Plastics—Specifications for plastics suitable for home composting
    塑料 适合家庭堆肥塑料技术规范
    China National Standards
    Plastics

    English PDF
    GB/T 40266-2021 Quality general rules of oxides barrier transparent Plastics laminated films and pouches for food packaging
    食品包装用氧化物阻隔透明塑料复合膜、袋质量通则
    China National Standards
    Plastics

    English PDF
    GB/T 40224-2021 Plastics boxes used for rainwater infiltration,attenuation and storage
    雨水渗透、调蓄、储存用塑料模块
    China National Standards
    Plastics

    English PDF
    GB/T 40006.3-2021 Plastics—Recycled plastics—Part 3:Polypropylene(PP) materials
    塑料 再生塑料 第3部分:聚丙烯(PP)材料
    China National Standards
    Plastics

    English PDF
    GB/T 40006.2-2021 Plastics—Recycled plastics—Part 2:Polyethylene(PE) materials
    塑料 再生塑料 第2部分:聚乙烯(PE)材料
    China National Standards
    Plastics

    English PDF
    GB/T 40006.1-2021 Plastics—Recycled plastic—Part 1:General rules
    塑料 再生塑料 第1部分:通则
    China National Standards
    Plastics

    English PDF
    GB/T 39937-2021 Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods
    塑料制品 聚丙烯(PP)挤塑板材 要求和试验方法
    China National Standards
    Plastics

    English PDF
    GB/T 39936-2021 Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods
    深冷保冷用泡沫塑料
    China National Standards
    Plastics

    English PDF
    GB/T 39935-2021 Plastics—Film and sheeting—Determination of blocking resistance
    塑料制品 薄膜和片材 抗粘连性的测定
    China National Standards
    Plastics

    English PDF
    GB/T 39934-2021 Plastics—Film and sheeting—Determination of blocking resistance
    家具中挥发性有机化合物的筛查检测方法 气相色谱-质谱法
    China National Standards
    Plastics

    English PDF
    GB/T 39827.2-2021 Plastics -- Post-consumer poly(ethylene terephthalate)(PET) bottle recyclates -- Part 2: Preparation of test specimens and determination properties
    塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第2部分:试样制备和性能测定
    China National Standards
    Plastics

    English PDF
    GB/T 39827.1-2021 Plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates -- Part 1: Designation system and basis for specifications
    塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第1部分:命名系统和分类基础
    China National Standards
    Plastics

    English PDF
    GB/T 39822-2021 Plastics—Determination of yellowness index and change in yellowness index
    塑料 黄色指数及其变化值的测定
    China National Standards
    Plastics

    English PDF
    GB/T 39821-2021 Plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel
    塑料 不能从规定漏斗流出的模塑材料表观密度的测定
    China National Standards
    Plastics

    English PDF
    GB/T 39818-2021 Plastics—Thermosetting moulding materials—Determination of shrinkage
    塑料 热固性模塑材料 收缩率的测定
    China National Standards
    Plastics

    English PDF
    GB/T 39812-2021 Plastics—Preparation of test specimens by machining
    塑料 试样的机加工制备
    China National Standards
    Plastics

    English PDF
    GB/T 10006-2021 Plastics—Film and sheeting—Determination of the coefficients of friction
    塑料 薄膜和薄片 摩擦系数的测定
    China National Standards
    Plastics

    English PDF
    GB/T 3681.2-2021 Plastics—Methods of exposure to solar radiation—Part 2: Direct weathering and exposure behind window glass
    塑料 太阳辐射暴露试验方法 第2部分:直接自然气候老化和暴露在窗玻璃后气候老化
    China National Standards
    Plastics

    English PDF
    GB/T 3681.1-2021 Plastics—Methods of exposure to solar radiation—Part 1: General guidance
    塑料 太阳辐射暴露试验方法 第1部分:总则
    China National Standards
    Plastics

    English PDF
    GB/T 41048-2021 Technical requirements for Plastics inspection chamber and manhole for urban drainage
    城镇排水用塑料检查井技术要求
    China National Standards
    Plastics

    English PDF
    GB/T 41168-2021 Plastics and aluminum foil laminated retort film and pouch for food packaging
    食品包装用塑料与铝箔蒸煮复合膜、袋
    China National Standards
    Plastics

    English PDF
    GB/T 41061-2021 Test methods for creep properties of fiber reinforced Plastics
    纤维增强塑料蠕变性能试验方法
    China National Standards
    Plastics

    English PDF
    GB/T 24282-2021 Plastics—Determination of xylene-soluble matter fraction in polypropylene
    塑料 聚丙烯中二甲苯可溶物含量的测定
    China National Standards
    Plastics

    English PDF
    GB 14232.4-2021 Plastics collapsible containers for human blood and blood components—Part 4: Aphaeresis blood bag systems with integrated features
    人体血液及血液成分袋式塑料容器 第4部分:含特殊组件的单采血袋系统
    China National Standards
    Plastics

    English PDF
    GB/T 41010-2021 Degradability and identification requirements of biodegradable Plastics and products
    生物降解塑料与制品降解性能及标识要求
    China National Standards
    Plastics

    English PDF
    GB/T 40933-2021 Plastics—Film and sheeting—Guidance on the testing of thermoplastic films
    塑料制品 薄膜和薄片 热塑性塑料薄膜试验指南
    China National Standards
    Plastics

    English PDF
    GB/T 40911.3-2021 Plastics—Poly(methyl methacrylate) sheets—Types,dimensions and characteristics—Part 3:Continuous cast sheets
    塑料制品 聚甲基丙烯酸甲酯板材 类型、尺寸和特性 第3部分:连续浇铸板材
    China National Standards
    Plastics

    English PDF
    GB/T 40911.2-2021 Plastics—Poly(methyl methacrylate)sheets—Types,dimensions and characteristics—Part 2:Extruded sheets
    塑料制品 聚甲基丙烯酸甲酯板材 类型、尺寸和特性 第2部分:挤出板材
    China National Standards
    Plastics

    English PDF
    GB/T 40726-2021 Rubber-or Plastics-coated fabrics—Determination of fogging characteristics of trim materials in the interior of automobiles
    橡胶或塑料涂覆织物 汽车内饰材料雾化性能的测定
    China National Standards
    Plastics

    English PDF
    GB/T 30314-2021 Rubber- or Plastics-coated fabrics—Determination of abrasion resistance—Taber abrader
    橡胶或塑料涂覆织物 耐磨性的测定 泰伯法
    China National Standards
    Plastics

    English PDF
    GB/T 18426-2021 Rubber-or Plastics-coated fabrics—Low-temperature bend test
    橡胶或塑料涂覆织物 低温弯曲试验
    China National Standards
    Plastics

    English PDF
    GB/T 40006.9-2021 Plastics—Recycled plastics—Part 9:Poly(ethylene terephthalate) (PET) materials
    塑料 再生塑料 第9部分:聚对苯二甲酸乙二醇酯(PET)材料
    China National Standards
    Plastics

    English PDF
    GB/T 40006.8-2021 Plastics—Recycled plastics—Part 8: Polyamide (PA) materials
    塑料 再生塑料 第8部分:聚酰胺(PA)材料
    China National Standards
    Plastics

    English PDF
    GB/T 40006.7-2021 Plastics—Recycled plastics—Part 7: Polycarbonate(PC) materials
    塑料 再生塑料 第7部分:聚碳酸酯(PC)材料
    China National Standards
    Plastics

    English PDF
    GB/T 40006.6-2021 Plastics—Recycled plastics—Part 6: Polystyrene(PS)and impact-resistant polystyrene(PS-I) materials
    塑料 再生塑料 第6部分:聚苯乙烯(PS)和抗冲击聚苯乙烯(PS-I)材料
    China National Standards
    Plastics

    English PDF
    GB/T 40006.5-2021 Plastics—Recycled plastics—Part 5:Acrylonitrile-butadiene-styrene (ABS) materials
    塑料 再生塑料 第5部分:丙烯腈-丁二烯-苯乙烯(ABS)材料
    China National Standards
    Plastics

    English PDF
    GB/T 40872-2021 Plastics—Test methods of polyethylene cellular
    塑料 聚乙烯泡沫试验方法
    China National Standards
    Plastics

    English PDF
    GB/T 22271.2-2021 Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
    塑料 聚甲醛(POM)模塑和挤出材料 第2部分:试样制备和性能测定
    China National Standards
    Plastics

    English PDF
    GB/T 22271.1-2021 Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 1: Designation system and basis for specification
    塑料 聚甲醛(POM)模塑和挤出材料 第1部分:命名系统和分类基础
    China National Standards
    Plastics

    English PDF
    GB/T 39171-2020 Technical specification for waste Plastics recycling
    废塑料回收技术规范
    China National Standards
    Plastics

    English PDF
    GB 14232.1-2020 Plastics collapsible containers for human blood and blood components—Part 1: Conventional containers
    人体血液及血液成分袋式塑料容器 第1部分:传统型血袋
    China National Standards
    Plastics

    English PDF
    GB/T 8813-2020 Rigid cellular Plastics—Determination of compression properties
    硬质泡沫塑料 压缩性能的测定
    China National Standards
    Plastics

    English PDF
    GB/T 24451-2020 Low resilience flexible polyurethane cellular Plastics
    慢回弹软质聚氨酯泡沫塑料
    China National Standards
    Plastics

    English PDF
    GB/T 38737-2020 Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems—Method by measurement of biogas production
    塑料 受控污泥消化系统中材料最终厌氧生物分解率测定 采用测量释放生物气体的方法
    China National Standards
    Plastics

    English PDF
    GB/T 38787-2020 Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials
    塑料 材料生物分解试验用样品制备方法
    China National Standards
    Plastics

    English PDF
    GB/T 38687-2020 Rubber and Plastics machinery—Communicating protocol for auxiliary equipment
    橡胶塑料机械 外围设备通信协议
    China National Standards
    Plastics

    English PDF
    GB/T 25156-2020 General specifications and inspection methods of rubber and Plastics injection moulding machines
    橡胶塑料注射成型机通用技术要求及检测方法
    China National Standards
    Plastics

    English PDF
    GB/T 38533-2020 Injection moulding machines for rubber and Plastics—Mould fixing and connection dimensions
    橡胶塑料注射成型机 模具固定和联接尺寸
    China National Standards
    Plastics

    English PDF
    GB/T 39714.2-2020 Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 2:Preparation of test specimens and determination of properties
    塑料 聚四氟乙烯(PTFE)半成品 第2部分:试样制备和性能测定
    China National Standards
    Plastics

    English PDF
    GB/T 39714.1-2020 Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 1:Requirements and designation
    塑料 聚四氟乙烯(PTFE)半成品 第1部分:要求和命名
    China National Standards
    Plastics

    English PDF
    GB/T 39690.2-2020 Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2:Preparation of test specimens and determination of properties
    塑料 源自柔性和刚性消费品包装的聚丙烯(PP)和聚乙烯(PE)回收混合物 第2部分:试样制备和性能测定
    China National Standards
    Plastics

    English PDF
    GB/T 39690.1-2020 Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 1: Designation system and basis for specification
    塑料 源自柔性和刚性消费品包装的聚丙烯(PP)和聚乙烯(PE)回收混合物 第1部分: 命名系统和分类基础
    China National Standards
    Plastics

    English PDF
    GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy
    塑料 热塑性塑料材料注塑试样的制备 第5部分:各向异性评估用标准试样的制备
    China National Standards
    Plastics

    English PDF
    GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars
    塑料 热塑性塑料材料注塑试样的制备 第2部分:小拉伸试样
    China National Standards
    Plastics

    English PDF
    GB/T 1632.4-2020 Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials
    塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第4部分:聚碳酸酯(PC)模塑和挤出材料
    China National Standards
    Plastics

    English PDF
    GB/T 39697.2-2020 Rubber or Plastics covered rollers—Specifications—Part 2:Surface characteristics
    橡胶或塑料包覆辊 规范 第2部分:表面特性
    China National Standards
    Plastics

    English PDF
    GB/T 39697.1-2020 Rubber or Plastics covered rollers—Specifications—Part 1: Requirements for hardness
    橡胶或塑料包覆辊 规范 第1部分:硬度要求
    China National Standards
    Plastics

    English PDF
    GB/T 39691-2020 Plastics—Determination of refractive index
    塑料 折光率的测定
    China National Standards
    Plastics

    English PDF
    GB/T 39483.2-2020 Rubber and Plastics injection moulding machine—Interface—Part 2:Data exchange interface
    橡胶塑料注射成型机 接口 第2部分:数据交换接口
    China National Standards
    Plastics

    English PDF
    GB/T 39385-2020 Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility
    塑料管道系统 热塑性塑料管材 环柔性的测定
    China National Standards
    Plastics

    English PDF
    GB/T 39383-2020 ThermoPlastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type joints
    埋地用无压热塑性塑料管道系统 弹性密封圈接头的密封性能试验方法
    China National Standards
    Plastics

    English PDF
    GB/T 39382-2020 ThermoPlastics piping systems for soil and waste discharge inside buildings—Test method for airtightness of joints
    建筑内排水排污用热塑性塑料管道系统 接头气密性试验方法
    China National Standards
    Plastics

    English PDF
    GB/T 39379-2020 ThermoPlastics piping systems for non-pressure applications—Test method for watertightness
    无压热塑性塑料管道系统 水密性试验方法
    China National Standards
    Plastics

    English PDF
    GB/T 20674.4-2020 Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 4: Traceability coding
    塑料管材和管件 聚乙烯系统熔接设备 第4部分:可追溯编码
    China National Standards
    Plastics

    English PDF
    GB/T 20674.3-2020 Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 3:Operator's badge
    塑料管材和管件 聚乙烯系统熔接设备 第3部分:操作者代码
    China National Standards
    Plastics

    English PDF
    GB/T 20674.2-2020 Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 2: Electrofusion
    塑料管材和管件 聚乙烯系统熔接设备 第2部分:电熔连接
    China National Standards
    Plastics

    English PDF
    GB/T 20674.1-2020 Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 1:Butt fusion
    塑料管材和管件 聚乙烯系统熔接设备 第1部分:热熔对接
    China National Standards
    Plastics

    English PDF
    GB/T 18252-2020 Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
    塑料管道系统 用外推法确定热塑性塑料材料以管材形式的长期静液压强度
    China National Standards
    Plastics

    English PDF
    GB/T 39395-2020 Test method for buckling resistance of the thermoPlastics inspection chamber bases
    热塑性塑料检查井井座抗压失稳试验方法
    China National Standards
    Plastics

    English PDF
    GB/T 39490-2020 Test method for liquid impingement erosion resistance of fiber-reinforced Plastics—Rotating apparatus method
    纤维增强塑料液体冲击抗侵蚀性试验方法 旋转装置法
    China National Standards
    Plastics

    English PDF
    GB/T 39483.1-2020 Rubber and Plastics injection moulding machine—Interface —Part 1: Mechanical and electrical interface
    橡胶塑料注射成型机 接口 第1部分:机械和电气接口
    China National Standards
    Plastics

    English PDF
    GB/T 39327-2020 Rubber and Plastics hoses for marine-engine wet-exhaust systems—Specification
    船用发动机湿式排气系统用橡胶和塑料软管 规范
    China National Standards
    Plastics

    English PDF
    GB/T 39249-2020 Rubber and Plastics hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test
    橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验
    China National Standards
    Plastics

    English PDF
    GB/T 36805.2-2020 Plastics—Determination of tensile properties at high strain rates—Part 2: Direct testing method
    塑料 高应变速率下的拉伸性能测定 第2部分:直接测试法
    China National Standards
    Plastics

    English PDF
    GB/T 14905-2020 Rubber and Plastics hoses—Determination of adhesion between components
    橡胶和塑料软管 各层间粘合强度的测定
    China National Standards
    Plastics

    English PDF
    GB 51352-2019 Engineering technical standard for fiber reinforced Plastics chimney
    纤维增强塑料排烟筒工程技术标准
    China National Standards
    Plastics

    English PDF
    GB/T 38288-2019 Plastics—Recycled polypropylene compound
    塑料 聚丙烯再生改性专用料
    China National Standards
    Plastics

    English PDF
    GB/T 38273.2-2019 Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties
    塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第2部分:试样制备和性能测定
    China National Standards
    Plastics

    English PDF
    GB/T 38273.1-2019 Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation system and basis for specification
    塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第1部分:命名系统和分类基础
    China National Standards
    Plastics

    English PDF
    GB/T 38271-2019 Plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography
    塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯(PS-I)中残留苯乙烯单体含量的测定 气相色谱法
    China National Standards
    Plastics

    English PDF
    GB/T 37188.3-2019 Plastics—Acquisition and presentation of comparable multipoint data—Part 3:Environmental influences on properties
    塑料 可比多点数据的获得和表示 第3部分:环境对性能的影响
    China National Standards
    Plastics

    English PDF
    GB/T 37188.1-2019 Plastics—Acquisition and presentation of comparable multipoint data—Part 1: Mechanical properties
    塑料 可比多点数据的获得和表示 第1部分:机械性能
    China National Standards
    Plastics

    English PDF
    GB/T 23711.8-2019 Test method for pressure vessels lined with Plastics—Part 8:High-resistance testing
    塑料衬里压力容器试验方法 第8部分:耐高电阻试验
    China National Standards
    Plastics

    English PDF
    GB/T 23711.7-2019 Test method for pressure vessels lined with Plastics—Part 7:Leakage testing
    塑料衬里压力容器试验方法 第7部分:泄漏试验
    China National Standards
    Plastics

    English PDF
    GB/T 23711.6-2019 Test method for pressure vessels lined with Plastics—Part 6:Anti pressure testing
    塑料衬里压力容器试验方法 第6部分:耐压试验
    China National Standards
    Plastics

    English PDF
    GB/T 23711.5-2019 Test method for pressure vessels lined with Plastics—Part 5:Cold-hot cycling inspection
    塑料衬里压力容器试验方法 第5部分:冷热循环检验
    China National Standards
    Plastics

    English PDF
    GB/T 23711.4-2019 Test method for pressure vessels lined with Plastics—Part 4:Negative pressure inspection
    塑料衬里压力容器试验方法 第4部分:耐负压检验
    China National Standards
    Plastics

    English PDF

    Find out:500Items   |  To Page of: First -Previous-Next -Last  | 1 2 3

     

    +86-755-25831330        info@transcustoms.com 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2025 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards