Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43246-2023 |
Technical requirements for manufacturing supervision of full-Section tunnel boring machines {译} 全断面隧道掘进机制造监理技术要求 |
China National Standards Sect |
 English PDF |
| GB/T 43087-2023 |
Microbeam analysis Analytical electron microscopy Method for determining interface position in cross-Sectional images of layered materials {译} 微束分析 分析电子显微术 层状材料截面像中界面位置的确定方法 |
China National Standards Sect |
English PDF |
| GB/T 25922-2023 |
Measurement of fluid flow in closed pipes Flow measurement using a vortex flowmeter installed in a circular cross-Section pipe filled with fluid {译} 封闭管道中流体流量的测量 用安装在充满流体的圆形截面管道中的涡街流量计测量流量 |
China National Standards Sect |
English PDF |
| GB/T 19215.5-2023 |
Cable duct systems for electrical installations - Part 2: Particular requirements - Section 3: Grooved cable duct systems for installation in cabinets {译} 电气安装用电缆槽管系统 第2部分：特殊要求 第3节：安装在机柜中的带槽电缆线槽系统 |
China National Standards Sect |
English PDF |
| GB/T 6346.14-2023 |
Fixed capacitors for electronic equipment - Part 14: Sectional specification Fixed capacitors for suppressing electromagnetic interference in power supplies {译} 电子设备用固定电容器 第14部分：分规范 抑制电源电磁干扰用固定电容器 |
China National Standards Sect |
English PDF |
| GB/T 17737.8-2022 |
Coaxial communication cables—Part 8: Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric 同轴通信电缆 第8部分：聚四氟乙烯绝缘半柔电缆分规范 |
China National Standards Sect |
English PDF |
| GB/T 41276-2022 |
Limits and detection methods of Phosphorus and its analogues in organophosphorus inSecticides {译} 有机磷类杀虫剂中治螟磷及其类似物限量及检测方法 |
China National Standards Sect |
English PDF |
| GB/T 23662-2022 |
Rubber seals for expansion joints in concrete road Sections {译} 混凝土路段伸缩缝用橡胶密封件 |
China National Standards Sect |
English PDF |
| GB/T 19042.5-2022 |
Evaluation and routine tests in medical imaging Sector - Part 3-5: X-ray computed tomography equipment imaging performance acceptance test and stability test {译} 医用成像部门的评价及例行试验 第3-5部分：X射线计算机体层摄影设备成像性能验收试验与稳定性试验 |
China National Standards Sect |
English PDF |
| GB/T 41749-2022 |
General requirements for surface quality of hot-rolled Section steel {译} 热轧型钢表面质量一般要求 |
China National Standards Sect |
English PDF |
| GB/T 40304-2021 |
Determination of content of nonmetallic inclusions in steel—Billet full Section method 钢中非金属夹杂物含量的测定 钢坯全截面法 |
China National Standards Sect |
English PDF |
| GB/T 10715-2021 |
Belt drives—V-ribbed belts, joined V-belts and V-belts including wide Section belts and hexagonal belts—Electrical conductivity of antistatic belts: Characteristics and methods of test 带传动 多楔带、联组V带及包括宽V带、六角带在内的单根V带 抗静电带的导电性:要求和试验方法 |
China National Standards Sect |
English PDF |
| GB/T 11313.41-2021 |
Radio-frequency connectors—Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors 射频连接器 第41部分: CQA系列快速锁紧射频连接器分规范 |
China National Standards Sect |
English PDF |
| GB/T 11313.40-2021 |
Radio-frequency connectors—Part 40: Sectional specification for 2.4 series R.F. connectors 射频连接器 第40部分: 2.4系列射频连接器分规范 |
China National Standards Sect |
English PDF |
| GB/T 11313.35-2021 |
Radio-frequency connectors—Part 35: Sectional specification for 2.92 series R.F connectors 射频连接器 第35部分: 2.92系列射频连接器分规范 |
China National Standards Sect |
English PDF |
| GB/T 11313.42-2021 |
Radio-frequency connectors -- Part 42: Sectional specification for CQN series quick lock RF connectors 射频连接器 第42部分：CQN系列快速锁紧射频连接器分规范 |
China National Standards Sect |
English PDF |
| GB/T 19290.7-2021 |
Modular order for the development of mechanical structures for electronic equipment practices—Part 2-5:Sectional specification—Interface co-ordination dimensions for the 25 mm equipment practice—Cabine tinterface dimensions for miscellaneous equipment 发展中的电子设备构体机械结构模数序列 第2-5部分：分规范 25 mm设备构体的接口协调尺寸 各种设备用机柜接口尺寸 |
China National Standards Sect |
English PDF |
| GB/T 12274.4-2021 |
Quartz crystal controlled oscillators of assessed quality—Part 4: Sectional specification—Capability approval 有质量评定的石英晶体振荡器 第4部分:分规范 能力批准 |
China National Standards Sect |
English PDF |
| GB/T 6346.24-2021 |
Fixed capacitors for use in electronic equipment—Part 24: Sectional specification—Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第24部分：分规范 表面安装导电聚合物固体电解质钽固定电容器 |
China National Standards Sect |
English PDF |
| GB/T 40562-2021 |
Potentiometers for use in electronic equipment—Part 6:Sectional specification—Surface mount preset potentiometers 电子设备用电位器 第6部分：分规范 表面安装预调电位器 |
China National Standards Sect |
English PDF |
| GB 24330-2020 |
General security technical specification for domestic sanitary inSecticide 家用卫生杀虫用品安全通用技术条件 |
China National Standards Sect |
English PDF |
| GB/T 39513-2020 |
Field efficacy test methods and criterions of public health inSecticides—Repellent 卫生杀虫剂现场药效测定与评价 驱避剂 |
China National Standards Sect |
English PDF |
| GB/T 39214-2020 |
Integrity requirements of Section fabrication for ship 船舶总段制造完整性要求 |
China National Standards Sect |
English PDF |
| GB/T 38902-2020 |
Determination of hollow fiber membrane cross-Section dimensions—Image analysis method 中空纤维膜丝截面结构尺寸的测定 图像分析法 |
China National Standards Sect |
English PDF |
| GB/T 38808-2020 |
Waves webs Section steel for building structures 建筑结构用波纹腹板型钢 |
China National Standards Sect |
English PDF |
| GB/T 38739-2020 |
Standards for safety application of public health inSecticides—Larvicides 卫生杀虫药剂安全使用准则 灭幼剂类 |
China National Standards Sect |
English PDF |
| GB/T 38631-2020 |
Information technology—Security techniques—Sector-specific application of GB/T 22080—Requirements 信息技术 安全技术 GB/T 22080具体行业应用 要求 |
China National Standards Sect |
English PDF |
| GB/T 37491-2019 |
Guideline of low oxygen control grain storage inSect 低氧防治储粮害虫一般规则 |
China National Standards Sect |
English PDF |
| GB/T 14515-2019 |
Sectional specification for single and double sided flexible printed board 单、双面挠性印制板分规范 |
China National Standards Sect |
English PDF |
| GB/T 19290.6-2018 |
Modular order for the development of mechanical structures for electronic equipment practices—Part 2-4: Sectional specification—Interface co-ordination dimensions for the 25 mm equipment practice—Adaptation dimensions for subracks or chassis applica 发展中的电子设备构体机械结构模数序列-第2-4部分:分规范-25-mm设备构体的接口协调尺寸-适用于符合IEC-60297-3-100(19-in)机柜或机架的插箱或机箱的适配尺寸 |
China National Standards Sect |
English PDF |
| GB/T 36981-2018 |
Railway applications—Technical criteria for the co-ordinations in the passenger train neutral-Section passing system with no power consumption 轨道交通-客运列车断电过分相系统相互匹配准则 |
China National Standards Sect |
English PDF |
| GB/T 11498-2018 |
Semiconductor devices—Integrated circuits—Part 21：Sectional specification for film integrated circuits and hybrid film integrated circuits on the basis of the qualification approval procedures 半导体器件-集成电路-第21部分：膜集成电路和混合膜集成电路分规范(采用鉴定批准程序)半导体器件-集成电路-第21部分：膜集成电路和混合膜集成电路分规范(采用鉴定批准程序) |
China National Standards Sect |
English PDF |
| GB/T 6346.26-2018 |
Fixed capacitors for use in electronic equipment—Part 26: Sectional specification—Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第26部分：分规范 导电高分子固体电解质铝固定电容器 |
China National Standards Sect |
English PDF |
| GB/T 11313.38-2018 |
Radio-frequency connectors—Part 38: Sectional specification for 50 Ω model,slide-in radio frequency coaxial connectors (type TMA) for rack and panel applications 射频连接器 第38部分: 50Ω背板和面板用模块滑入式射频连接器(TMA型)分规范 |
China National Standards Sect |
English PDF |
| GB/T 36524-2018 |
Tools for pressing—Compression springs with rectangular Section—Housing dimensions and colour coding 冲模 矩形截面压缩弹簧 安装尺寸和颜色标识 |
China National Standards Sect |
English PDF |
| GB/T 11313.11-2018 |
Radio-frequency connectors—Part 11：Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9.5mm (0.374in) with screw coupling with characteristic impedance 50Ω (type 4.1/9.5) 射频连接器 第11部分：外导体内径为9.5mm(0.374in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(4.1/9.5型)分规范 |
China National Standards Sect |
English PDF |
| GB/T 11313.13-2018 |
Radio-frequency connectors—Part 13:Sectional specification for type 1.6/5.6 and 1.8/5.6 RF coaxial connectors 射频连接器 第13部分：1.6/5.6和1.8/5.6型射频同轴连接器分规范 |
China National Standards Sect |
English PDF |
| GB/T 11313.43-2018 |
Radio-frequency connectors—Part 43:Sectional specification for RBMA series blind mating RF coaxial connectors 射频连接器 第43部分：RBMA系列盲配射频同轴连接器分规范 |
China National Standards Sect |
English PDF |
| GB/T 35876-2018 |
Inspection of grain and oils—Determination of sodium,mgnesium, kalium, calcium, chromium, manganese, iron, copper, zinc, arsenic, selenium, cadmium and plumbum in cereals and derived products—Iductively cupled pasma-mss Sectrometric method 粮油检验 谷物及其制品中钠、镁、钾、钙、铬、锰、铁、铜、锌、砷、硒、镉和铅的测定 电感耦合等离子体质谱法 |
China National Standards Sect |
English PDF |
| GB/T 6346.2501-2018 |
Fixed capacitors for use in electronic equipment—Part 25:Sectional specification—Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第25-1部分：空白详细规范 表面安装导电高分子固体电解质铝固定电容器 评定水平EZ |
China National Standards Sect |
English PDF |
| GB/T 6346.25-2018 |
Fixed capacitors for use in electronic equipment—Part 25: Sectional specification—Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第25部分：分规范 表面安装导电高分子固体电解质铝固定电容器 |
China National Standards Sect |
English PDF |
| GB/T 11313.39-2018 |
Radio frequency connectors—Part 39: Sectional specification for CQM series quick lock RF connectors 射频连接器 第39部分:CQM系列快速锁紧射频连接器分规范 |
China National Standards Sect |
English PDF |
| GB/T 34199-2017 |
Hot-rolled H Section steel for electrified railway pillars 电气化铁路接触网支柱用热轧H型钢 |
China National Standards Sect |
English PDF |
| GB/T 2101-2017 |
General requirment of acceptance, packaging, marking and certification for Section steel 型钢验收、包装、标志及质量证明书的一般规定 |
China National Standards Sect |
English PDF |
| GB/T 34103-2017 |
Hot rolled H Section steel for ocean engineering structure 海洋工程结构用热轧H型钢 |
China National Standards Sect |
English PDF |
| GB/T 19215.4-2017 |
Cable trunking and ducting systems for electrical installations—Part 2: Particular requirements—Section 4:Service poles 电气安装用电缆槽管系统 第2部分：特殊要求 第4节：辅助端 |
China National Standards Sect |
English PDF |
| GB/T 4588.4-2017 |
Sectional specification for rigid multilayer printed boards 刚性多层印制板分规范 |
China National Standards Sect |
English PDF |
| GB/T 33968-2017 |
Hot rolled steel Sections with improved weldability 改善焊接性能热轧型钢 |
China National Standards Sect |
English PDF |
| GB/T 33976-2017 |
Corrosion resistant hot rolled Section steel for cargo oil tanks 原油船货油舱用耐腐蚀热轧型钢 |
China National Standards Sect |
English PDF |
| GB/T 6728-2017 |
Cold forming hollow Sectional steel for general structure 结构用冷弯空心型钢 |
China National Standards Sect |
English PDF |
| GB/T 4697-2017 |
Hot rolled steel Section for mine timbering 矿山巷道支护用热轧型钢 |
China National Standards Sect |
English PDF |
| GB/T 33814-2017 |
Welded H-Section steel 焊接H型钢 |
China National Standards Sect |
English PDF |
| GB/T 6725-2017 |
General requirements of cold forming steel Sections 冷弯型钢通用技术要求 |
China National Standards Sect |
English PDF |
| GB/T 11263-2017 |
Hot rolled H and cut T Section steel 热轧H型钢和剖分T型钢 |
China National Standards Sect |
English PDF |
| GB/T 6723-2017 |
Cold forming open Section steel for general structure 通用冷弯开口型钢 |
China National Standards Sect |
English PDF |
| GB/T 1563-2017 |
Taper keys—Cross Section dimensions of keyways 楔键 键槽的剖面尺寸 |
China National Standards Sect |
English PDF |
| GB/T 33520-2017 |
Drive shaft T-Section tooth 传动轴T型端面齿 |
China National Standards Sect |
English PDF |
| GB/T 18015.7-2017 |
Multicore and symmetrical pair/quad cables for digital communications—Part 7: Symmetrical pair/quad cables with transmission characteristics up to 1 200MHz—Sectional specification for digital and analog communication cables 数字通信用对绞或星绞多芯对称电缆 第7部分：具有1200MHz及以下传输特性的对绞或星绞对称电缆 数字及模拟通信电缆分规范 |
China National Standards Sect |
English PDF |
| GB/T 18015.8-2017 |
Multicore and symmetrical pair/quad cables for digital communications—Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1200MHz－Work area wiring Sectional specification 数字通信用对绞或星绞多芯对称电缆 第8部分：具有1200MHz及以下传输特性的对绞或星绞对称电缆 工作区布线电缆分规范 |
China National Standards Sect |
English PDF |
| GB/T 35206-2017 |
Thin Section examination of shale and mudstone 页岩和泥岩岩石薄片鉴定 |
China National Standards Sect |
English PDF |
| GB/T 24689.2-2017 |
Equipment for crop protection—InSect-killing light trap 植物保护机械 杀虫灯 |
China National Standards Sect |
English PDF |
| GB/T 18418-2017 |
Domestic sanitary inSecticide—Electrothermal vaporizing liquid 家用卫生杀虫用品 电热蚊香液 |
China National Standards Sect |
English PDF |
| GB/Z 35588-2017 |
Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-Section conduits 用安装在圆形截面管道中的差压装置测量湿气体流量 |
China National Standards Sect |
English PDF |
| GB/T 14598.23-2017 |
Electrical relays—Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment—Section 3: Seismic tests 电气继电器 第21部分：量度继电器和保护装置的振动、冲击、碰撞和地震试验 第3篇：地震试验 |
China National Standards Sect |
English PDF |
| GB/T 18416-2017 |
Domestic sanitary inSecticide—Mosquito coils 家用卫生杀虫用品 蚊香 |
China National Standards Sect |
English PDF |
| GB/T 18419-2017 |
Domestic sanitary inSecticidal—Aerosols 家用卫生杀虫用品 杀虫气雾剂 |
China National Standards Sect |
English PDF |
| GB/T 18417-2017 |
Domestic sanitary inSecticide—Electrothermal vaporizing mats 家用卫生杀虫用品 电热蚊香片 |
China National Standards Sect |
English PDF |
| GB/T 706-2016 |
Hot rolled Section steel 热轧型钢 |
China National Standards Sect |
English PDF |
| GB/T 33241-2016 |
Zinc-aluminum alloy coated Section steel 锌铝合金镀层型钢 |
China National Standards Sect |
English PDF |
| GB/T 25020.4-2016 |
Steel pole for overhead contact system of electrified railways—Part 4: H Section pole 电气化铁路接触网钢支柱 第4部分：H形支柱 |
China National Standards Sect |
English PDF |
| GB/T 10326-2016 |
Shaped refractory products inspections of dimension, appearance and Section 定形耐火制品尺寸、外观及断面的检查方法 |
China National Standards Sect |
English PDF |
| GB/T 33162-2016 |
Continuously hot-rolled steel sheet and strip for cold-forming steel Sections 冷弯型钢用热连轧钢板及钢带 |
China National Standards Sect |
English PDF |
| GB/T 32977-2016 |
Hot rolled improved corrosion resisting steel Sections 改善耐蚀性能热轧型钢 |
China National Standards Sect |
English PDF |
| GB/T 32920-2016 |
Information technology—Security techniques—Information security management for inter-Sector and inter-organizational communications 信息技术 安全技术 行业间和组织间通信的信息安全管理 |
China National Standards Sect |
English PDF |
| GB/T 32600.2-2016 |
Textile machinery and accessories—Main dimensions for Section wires for metallic card clothing—Part 2: Foot with interchaining 纺织机械与附件 梳理机用金属针布齿条截面主要尺寸 第２部分：自锁基部 |
China National Standards Sect |
English PDF |
| GB/T 32600.1-2016 |
Textile machinery and accessories—Main dimensions for Section wires for metallic card clothing—Part 1: Foot without interlocking or interchainning 纺织机械与附件 梳理机用金属针布齿条截面主要尺寸 第1部分：普通基部 |
China National Standards Sect |
English PDF |
| GB/T 12357.4-2016 |
Multimode optical fibres for telcommunication—Part 4: Sectional specification for category A4 multimode fibres 通信用多模光纤 第4部分：A4类多模光纤特性 |
China National Standards Sect |
English PDF |
| GB/T 32538.1-2016 |
Agricultural vehicles—Mechanical connections on towed vehicles—Part 1: Dimensions for hitch rings of 50/30 mm cross Section 农业车辆 被牵引车辆的机械连接装置 第1部分：50mm/30mm横截面的挂接环尺寸 |
China National Standards Sect |
English PDF |
| GB/T 11313.29-2015 |
Radio frequency connectors—Part 29: Sectional specification for miniature radio frequency coaxial connector(type 1.0/2.3)with screw, snap-on, push-pull or quick-lock,slide-in （rack and panel applications）mechanism with characteristic impedance 50Ω 射频连接器 第29部分：50Ω和75Ω用特性阻抗为50Ω、具有螺纹、推拉、快锁或滑轨式机架或面板用小型射频同轴连接器（1.0/2.3型）分规范 |
China National Standards Sect |
English PDF |
| GB/T 12357.1-2015 |
Multimode optical fibres for telecommunication—Part 1: Sectional specification for category A1 multimode fibres 通信用多模光纤 第1部分：A1类多模光纤特性 |
China National Standards Sect |
English PDF |
| GB/T 32163.3-2015 |
Specification for eco-design product assessment—Part 3: InSecticides 生态设计产品评价规范 第3部分：杀虫剂 |
China National Standards Sect |
English PDF |
| GB/T 9546.8-2015 |
Fixed resistors for use in electronic equipment—Part 8: Sectional specification—Fixed surface mount resistors 电子设备用固定电阻器 第8部分：分规范 表面安装固定电阻器 |
China National Standards Sect |
English PDF |
| GB/T 6346.3-2015 |
Fixed capacitors for use in electronic equipment—Part 3: Sectional specification—Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte 电子设备用固定电容器 第3部分：分规范 表面安装MnO2固体电解质钽固定电容器 |
China National Standards Sect |
English PDF |
| GB/T 6346.14-2015 |
Fixed capacitors for use in electronic equipment—Part 14: Sectional specification—Fixed capacitors for electromagnetic interference suppression and connection to the supply mains 电子设备用固定电容器 第14部分：分规范 抑制电源电磁干扰用固定电容器 |
China National Standards Sect |
English PDF |
| GB/T 6346.11-2015 |
Fixed capacitors for use in electronic equipment—Part 11: Sectional specification—―Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors 电子设备用固定电容器 第11部分：分规范 金属箔式聚乙烯对苯二甲酸乙二醇酯膜介质直流固定电容器 |
China National Standards Sect |
English PDF |
| GB/T 11313.8-2015 |
Radio-frequency connectors—Part 8: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with bayonet lock—Characteristic impedance 50Ω（75Ω）(type BNC) 射频连接器 第8部分：外导体内径为6.5mm(0.256in)、特性阻抗为50Ω（75Ω）、卡口连接的射频同轴连接器（BNC型）分规范 |
China National Standards Sect |
English PDF |
| GB/T 11313.37-2015 |
Radio-frequency connectors—Part 37: Sectional specification for STWX8 series R.F. coaxial connectors 射频连接器 第37部分：STWX8系列射频同轴连接器分规范 |
China National Standards Sect |
English PDF |
| GB/T 11313.16-2015 |
Radio-frequency connectors—Part 16：Sectional specification for RF coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling—Characteristics impedance 50 Ω (75 Ω) (type N) 射频连接器 第16部分：外导体内径为7mm（0.276in）、特性阻抗为50Ω（75Ω）、螺纹连接的射频同轴连接器（N型）分规范 |
China National Standards Sect |
English PDF |
| GB/T 11313.101-2015 |
Radio-frequency connectors—Part 101：Sectional specification for MMCX series RF coaxial connectors 射频连接器 第101部分：MMCX系列射频同轴连接器分规范 |
China National Standards Sect |
English PDF |
| GB/T 31720-2015 |
InSecticide resistance management for vector—General rules 病媒生物抗药性治理 总则 |
China National Standards Sect |
English PDF |
| GB/T 31711-2015 |
Field efficacy test methods and criterions of public health inSecticides—Mosquito larvicides 卫生杀虫剂现场药效测定与评价 杀蚊幼剂 |
China National Standards Sect |
English PDF |
| GB/T 32345-2015 |
Guidelines for the conduct of tests for distinctness, uniformity and stability—Tree peony（Paeonia Sect. Moutan） 植物新品种特异性、一致性、稳定性测试指南 牡丹 |
China National Standards Sect |
English PDF |
| GB 50410-2014 |
Code for design of Section steel hot rolling Mills 型钢轧钢工程设计规范 |
China National Standards Sect |
English PDF |
| GB/T 31218-2014 |
Metallic materials—Determination of residual stress—Sectioning relaxation strain-gage method 金属材料 残余应力测定 全释放应变法 |
China National Standards Sect |
English PDF |
| GB/T 15448-2013 |
Fixed capacitors for use in electronic equipment—Part 19: Sectional specification—Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c.capacitors 电子设备用固定电容器 第19部分:分规范 表面安装金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器 |
China National Standards Sect |
English PDF |
| GB/T 14579-2013 |
Fixed capacitors for use in electronic equipment—Part 17：Sectional specification—Fixed metallized polypropylene film dielectric a.c. and pulse capacitors 电子设备用固定电容器 第17部分:分规范 金属化聚丙烯膜介质交流和脉冲固定电容器 |
China National Standards Sect |
English PDF |
| GB/T 10188-2013 |
Fixed capacitors for use in electronic equipment—Part 13：Sectional specification—Fixed polypropylene film dielectric metal foil d.c.capacitors 电子设备用固定电容器 第13部分：分规范 金属箔式聚丙烯膜介质直流固定电容器 |
China National Standards Sect |
English PDF |
| GB/T 4457.5-2013 |
Mechanical drawings―Basic conventions for representing areas on cuts and Sections 机械制图 剖面区域的表示法 |
China National Standards Sect |
English PDF |
| GB/T 17738.4-2013 |
Radio frequency and coaxial cable assemblies－Part 4: Sectional specification for semi-rigid coaxial cable assemblies 射频同轴电缆组件 第4部分：半硬同轴电缆组件分规范 |
China National Standards Sect |
English PDF |
| GB/T 17738.3-2013 |
Radio frequency and coaxial cable assemblies―Part 3：Sectional specification for semi-flexible coaxial cable assemiblies 射频同轴电缆组件 第3部分：半柔同轴电缆组件分规范 |
China National Standards Sect |
English PDF |
| GB/T 17738.2-2013 |
Radio frequency and coaxial cable assemblies―Part 2: Sectional specification for flexible coaxial cable assemblies 射频同轴电缆组件 第2部分：柔软同轴电缆组件分规范 |
China National Standards Sect |
English PDF |
| GB/T 17737.5-2013 |
Coaxial communication cables－Part 5：Sectional specification for CATV trunk and distribution cables 同轴通信电缆 第5部分：CATV用干线和配线电缆分规范 |
China National Standards Sect |
English PDF |
| GB/T 17737.4-2013 |
Coaxial communication cables—Part 4: Sectional specification for leaky cables 同轴通信电缆 第4部分：漏泄电缆分规范 |
China National Standards Sect |
English PDF |
| GB/T 11322.1-2013 |
Radio frequency cables―Part 0: Guide to the design of detail specifications―Section 1―Coaxial cables 射频电缆 第0部分：详细规范设计指南 第1篇 同轴电缆 |
China National Standards Sect |
English PDF |
| GB/T 11313.9-2013 |
Radio-frequency connectors―Part 9: Sectional specification for SMC series R.F. coaxial connectors 射频连接器 第9部分：SMC系列射频同轴连接器分规范 |
China National Standards Sect |
English PDF |
| GB/T 11313.24-2013 |
Radio frequency connectors―Part 24: Sectional specification-radio frequency coaxial connectors with screw coupling, typically for use in 75Ω cable networks (type F) 射频连接器 第24部分: 75Ω电缆分配系统用螺纹连接射频同轴连接器（F型）分规范 |
China National Standards Sect |
English PDF |
| GB/T 11313.19-2013 |
Radio-frequency connectors―Part 19: Sectional specification-radio frequency coaxial connectors of type SSMB 射频连接器 第19部分：SSMB型射频同轴连接器分规范 |
China National Standards Sect |
English PDF |
| GB/T 11313.18-2013 |
Radio-frequency connectors—Part 18：Sectional specification-Radio frequency coaxial connectors of type SSMA 射频连接器 第18部分：SSMA系列射频同轴连接器分规范 |
China National Standards Sect |
English PDF |
| GB/T 29776-2013 |
Textiles - Determination of resistance to certain inSect pests 纺织品 防虫蛀性能的测定 |
China National Standards Sect |
English PDF |
| GB/T 29762-2013 |
Carbon fibre - Determination of filament diameter and cross-Section area 碳纤维 纤维直径和横截面积的测定 |
China National Standards Sect |
English PDF |
| GB/T 29567-2013 |
The bioassay method for flies’ resistance to inSecticides - Topical application method 蝇类对杀虫剂抗药性的生物学测定方法 微量点滴法 |
China National Standards Sect |
English PDF |
| GB/T 29566-2013 |
The bioassay methods for mosquitoes’ resistance to inSecticides 蚊类对杀虫剂抗药性的生物学测定方法 |
China National Standards Sect |
English PDF |
| GB/T 12796.2-2012 |
Permanent ferrite magnets - Part 2: Sectional specification for permanent ferrite magnets for use in micromotors 永磁铁氧体磁体 第2部分：微电机用永磁铁氧体磁体分规范 |
China National Standards Sect |
English PDF |
| GB/T 11313.10-2012 |
Radio-frequency connectors - Part 10：Sectional specification - SMB series R.F. coaxial connectors 射频连接器 第10部分：SMB系列射频同轴连接器分规范 |
China National Standards Sect |
English PDF |
| GB/T 14860.4-2012 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure 电子和通信设备用变压器和电感器 第4部分：按能力批准程序评定质量的开关电源变压器分规范 |
China National Standards Sect |
English PDF |
| GB/T 14860.3-2012 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 3：Sectional specification for power transformers on the basis of the capability approval procedure 电子和通信设备用变压器和电感器 第3部分：按能力批准程序评定质量的电源变压器分规范 |
China National Standards Sect |
English PDF |
| GB/T 16608.50-2012 |
Electromechanical all-or-nothing relays - Part 50: Sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality 有或无机电继电器 第50部分：分规范 电信用有质量评定的有或无机电继电器 |
China National Standards Sect |
English PDF |
| GB/T 12859.2-2012 |
Piezoelectric ceramic resonators - A specification in the IEC quality assessment System for electronic components (IECQ) - Part 2: Sectional specification-Qualification approval 电子元器件质量评定体系规范 压电陶瓷谐振器 第2部分：分规范- 鉴定批准 |
China National Standards Sect |
English PDF |
| GB/T 10190-2012 |
Fixed capacitors for use in electronic equipment - Part 16: Sectional specification：Fixed metallized polypropylene film dielectric d.c.capacitors 电子设备用固定电容器 第16部分: 分规范 金属化聚丙烯膜介质直流固定电容器 |
China National Standards Sect |
English PDF |
| GB/T 10185-2012 |
Fixed capacitors for use in electric equipment - Part 7: Sectional specification Fixed polystyrene film dielectric metal foil d.c. capacitors 电子设备用固定电容器 第7部分：分规范 金属箔式聚苯乙烯膜介质直流固定电容器 |
China National Standards Sect |
English PDF |
| GB/T 28414-2012 |
Structural Section steels with improved seismie resistance 抗震结构用型钢 |
China National Standards Sect |
English PDF |
| GB/T 28617-2012 |
General guidance for green manufacturing technology - Foundry Section 绿色制造通用技术导则 铸造 |
China National Standards Sect |
English PDF |
| GB/T 7424.5-2012 |
Optical fibre cables - Part 5: Sectional specification - Micro-duct optical fibre cables and fibre units for installation by blowing 光缆 第5部分：分规范 用于气吹安装的微型光缆和光纤单元 |
China National Standards Sect |
English PDF |
| GB/T 7332-2011 |
Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric d.c.capacitors 电子设备用固定电容器 第2部分：分规范 金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器 |
China National Standards Sect |
English PDF |
| GB/T 5968-2011 |
Fixed capacitors for use in electronic equipment - Part 9: Sectional specification:Fixed capacitors of ceramic dielectric,Class 2 电子设备用固定电容器 第9部分：分规范 2类瓷介固定电容器 |
China National Standards Sect |
English PDF |
| GB/T 5966-2011 |
Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric,Class 1 电子设备用固定电容器 第8部分：分规范 1类瓷介固定电容器 |
China National Standards Sect |
English PDF |
| GB/T 27784-2011 |
Field efficacy test methods and criterions of public health inSecticides - General principles 卫生杀虫剂现场药效测定及评价 总则 |
China National Standards Sect |
English PDF |
| GB/T 27783-2011 |
Field efficacy test methods and criterions of public health inSecticides - Cockroach bait 卫生杀虫剂现场药效测定及评价 杀蟑毒（胶）饵 |
China National Standards Sect |
English PDF |
| GB/T 27782-2011 |
Field efficacy test methods and criterions of public health inSecticides - Aerosol 卫生杀虫剂现场药效测定及评价 气雾剂 |
China National Standards Sect |
English PDF |
| GB/T 27781-2011 |
Field efficacy test methods and criterions of public health inSecticides - Spray fluid 卫生杀虫剂现场药效测定及评价 喷射剂 |
China National Standards Sect |
English PDF |
| GB/T 27779-2011 |
Standards for safety application of public health inSecticides - Pyrethroid insecticides 卫生杀虫剂安全使用准则 拟除虫菊酯类 |
China National Standards Sect |
English PDF |
| GB/T 28015-2011 |
Domestic sanitary inSecticide - Test method of smoke dust 家用卫生杀虫用品 烟尘量试验方法 |
China National Standards Sect |
English PDF |
| GB/T 28006-2011 |
Domestic sanitary inSecticide - Odor grade 家用卫生杀虫用品 气味等级 |
China National Standards Sect |
English PDF |
| GB/T 26720-2011 |
General principles of stipulating the guidelines for cleaner production audit in service Sectors 服务业清洁生产审核指南编制通则 |
China National Standards Sect |
English PDF |
| GB/T 26420-2010 |
Disinfestation technical rules of forest quarantine pest inSect 林业检疫性害虫除害处理技术规程 |
China National Standards Sect |
English PDF |
| GB/T 26352-2010 |
Test methods of cockroach resistance to inSecticides - The bioassay methods for Blattella germanica 蜚蠊抗药性检测方法 德国小蠊生物测定法 |
China National Standards Sect |
English PDF |
| GB/T 26351-2010 |
Test methods of cockroach resistance to inSecticides - Test methods of insensitive acetylcholinesterase for Blattella germanica 蜚蠊抗药性检测方法 德国小蠊不敏感乙酰胆碱酯酶法 |
China National Standards Sect |
English PDF |
| GB/T 26350-2010 |
Test methods of fly resistance to inSecticides - The bioassay methods for Musca domestica 蝇类抗药性检测方法 家蝇生物测定法 |
China National Standards Sect |
English PDF |
| GB/T 26349-2010 |
Test methods of fly resistance to inSecticides - Test methods of insensitive acetylcholinesterase for Musca domestica 蝇类抗药性检测方法 家蝇不敏感乙酰胆碱酯酶法 |
China National Standards Sect |
English PDF |
| GB/T 26348-2010 |
Test methods of mosquito resistance to inSecticides - Test methods of insensitive acetylcholinesterase for the mosquito 蚊虫抗药性检测方法 不敏感乙酰胆碱酯酶法 |
China National Standards Sect |
English PDF |
| GB/T 26347-2010 |
Test methods of mosquito resistance to inSecticides - Bioassay methods 蚊虫抗药性检测方法 生物测定法 |
China National Standards Sect |
English PDF |
| GB/T 25922-2010 |
Measurement of fluid flow in closed conduits - Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-Section conduits running full 封闭管道中流体流量的测量 用安装在充满流体的圆形截面管道中的涡街流量计测量流量的方法 |
China National Standards Sect |
English PDF |
| GB/T 26027-2010 |
Aluminium and aluminium alloys drawn seamless tubes for large circumscribed circle diameter of cross Section 铝及铝合金大规格拉制无缝管 |
China National Standards Sect |
English PDF |
| GB 50647-2011 |
Code for planning of interSections on urban roads 城市道路交叉口规划规范 |
China National Standards Sect |
English PDF |
| GB/T 11263-2010 |
Hot-rolled H and cut T Section steel 热轧H型钢和剖分T型钢 |
China National Standards Sect |
English PDF |
| GB/T 17971.6-2010 |
Information technology - Keyboard layouts for text and office systems - Part 6: Function Section 信息技术 文本和办公系统的键盘布局 第6部分：功能区 |
China National Standards Sect |
English PDF |
| GB/T 17971.5-2010 |
Information technology - Keyboard layouts for text and office systems - Part 5: Editing Section 信息技术 文本和办公系统的键盘布局 第5部分：编辑区 |
China National Standards Sect |
English PDF |
| GB/T 17971.4-2010 |
Information technology - Keyboard layouts for text and office systems - Part 4: Numeric Section 信息技术 文本和办公系统的键盘布局 第4部分：数字区 |
China National Standards Sect |
English PDF |
| GB/T 17971.3-2010 |
Information technology - Keyboard layouts for text and office systems - Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric Section 信息技术 文本和办公系统的键盘布局 第3部分：字母数字区的字母数字分区的补充布局 |
China National Standards Sect |
English PDF |
| GB/T 17971.2-2010 |
Information technology - Keyboard layouts for text and office systems - Part 2: Alphanumeric Section 信息技术 文本和办公系统的键盘布局 第2部分：字母数字区 |
China National Standards Sect |
English PDF |
| GB/T 25020.4-2010 |
Steel pole for overhead contact system of electrified railway - Part 4：H Section pole 电气化铁路接触网钢支柱 第4部分：H形支柱 |
China National Standards Sect |
English PDF |
| GB/T 24689.4-2009 |
Equipment for crop protection - InSect adhesive board 植物保护机械 诱虫板 |
China National Standards Sect |
English PDF |
| GB/T 1209.3-2009 |
Agricultural machinery - Cutter bars - Part 3:Knife Sections, ledger plates and knife backs 农业机械 切割器 第3部分：动刀片、定刀片和刀杆 |
China National Standards Sect |
English PDF |
| GB/T 4061-2009 |
Polycrystalline silicon-examination method-assessment of sandwiches on cross-Section by chemical corrosion 硅多晶断面夹层化学腐蚀检验方法 |
China National Standards Sect |
English PDF |
| GB/T 24534.4-2009 |
Cereals and pulses - Determination of hidden inSect infestation - Part 4: Rapid methods 谷物与豆类隐蔽性昆虫感染的测定 第4部分：快速方法 |
China National Standards Sect |
English PDF |
| GB/T 24534.3-2009 |
Cereals and pulses - Determination of hidden inSect infestation - Part 3: Reference method 谷物与豆类隐蔽性昆虫感染的测定 第3部分：基准方法 |
China National Standards Sect |
English PDF |
| GB/T 24534.2-2009 |
Cereals and pulses - Determination of hidden inSect infestation - Part 2: Sampling 谷物与豆类隐蔽性昆虫感染的测定 第2部分：取样 |
China National Standards Sect |
English PDF |
| GB/T 24534.1-2009 |
Cereals and pulses - Determination of hidden inSect infestation - Part 1: General principles 谷物与豆类隐蔽性昆虫感染的测定 第1部分：总则 |
China National Standards Sect |
English PDF |
| GB/T 22101.5-2009 |
Technical specification for evaluating resistance of cotton to diseases and inSect pests - Part 5: Verticillium wilt 棉花抗病虫性评价技术规范 第5部分：黄萎病 |
China National Standards Sect |
English PDF |
| GB/T 22101.4-2009 |
Technical specification for evaluating resistance of cotton to diseases and inSect pests - Part 4: Fusarium wilt 棉花抗病虫性评价技术规范 第4部分：枯萎病 |
China National Standards Sect |
English PDF |
| GB/T 22101.3-2009 |
Technical specification for evaluating resistance of cotton to disease and inSect pests - Part 3: Pink bollworm 棉花抗病虫性评价技术规范 第3部分：红铃虫 |
China National Standards Sect |
English PDF |
| GB/T 22101.2-2009 |
Technical specification for evaluating resistance of cotton to disease and inSect pests - Part 2: Cotton aphid 棉花抗病虫性评价技术规范 第2部分：蚜虫 |
China National Standards Sect |
English PDF |
| GB/T 18419-2009 |
Domestic sanitary inSecticidal aerosols 家用卫生杀虫用品 杀虫气雾剂 |
China National Standards Sect |
English PDF |
| GB/T 18418-2009 |
Domestic sanitary inSecticide electrothermal - Vaporizing liquid 家用卫生杀虫用品 电热蚊香液 |
China National Standards Sect |
English PDF |
| GB/T 18417-2009 |
Domestic sanitary inSecticide electrothermal - Vaporizing mats 家用卫生杀虫用品 电热蚊香片 |
China National Standards Sect |
English PDF |
| GB/T 18416-2009 |
Domestic sanitary inSecticide - Mosquito coils 家用卫生杀虫用品 蚊香 |
China National Standards Sect |
English PDF |
| GB 24330-2009 |
General security technical specification for domestic sanitary inSecticide 家用卫生杀虫用品安全通用技术条件 |
China National Standards Sect |
English PDF |
| GB/T 17980.149-2009 |
Pesticide - Guidelines for the field efficacy trials(2) - Part 149: InSecticides against solenopsis invicta buren 农药 田间药效试验准则(二) 第149部分：杀虫剂防治红火蚁 |
China National Standards Sect |
English PDF |
| GB/T 24421.4-2009 |
Guidelines for standardization of organizations in service Sector - Part 4: Standard actualize and appraise 服务业组织标准化工作指南 第4部分：标准实施及评价 |
China National Standards Sect |
English PDF |
| GB/T 24421.3-2009 |
Guidelines for standardization of organizations in service Sector - Part 3: The drafting of standards 服务业组织标准化工作指南 第3部分：标准编写 |
China National Standards Sect |
English PDF |
| GB/T 24421.2-2009 |
Guidelines for standardization of organizations in service Sector - Part 2: Standard system 服务业组织标准化工作指南 第2部分：标准体系 |
China National Standards Sect |
English PDF |
| GB/T 24421.1-2009 |
Guidelines for standardization of organizations in service Sector - Part 1: Basic requirements 服务业组织标准化工作指南 第1部分：基本要求 |
China National Standards Sect |
English PDF |
| GB/T 14395-2009 |
Coding rules for urban geographical features - City roads, road interSections, blocks and municipal pipe lines 城市地理要素编码规则 城市道路、道路交叉口、街坊、市政工程管线 |
China National Standards Sect |
English PDF |
| GB/T 23662-2009 |
Rubber seals for use between concrete motorway paving Sections 混凝土道路伸缩缝用橡胶密封件 |
China National Standards Sect |
English PDF |
| GB/T 23392.4-2009 |
Technical specification for the forecast of diseases and inSects on cruciferous plants - Part 4: Spodoptera exigua(Hvbner) 十字花科蔬菜病虫害测报技术规范 第4部分：甜菜夜蛾 |
China National Standards Sect |
English PDF |
| GB/T 23392.3-2009 |
Technical specification for the forecast of diseases and inSects on cruciferous plants - Part 3: Plutella xylostella linnaeus 十字花科蔬菜病虫害测报技术规范 第3部分：小菜蛾 |
China National Standards Sect |
English PDF |
| GB/T 23392.2-2009 |
Technical specification for the forecast of diseases and inSects on cruciferous plants - Part 2: Erwinia carotovora subsp. carotovora (Jones) Bergey et al. 十字花科蔬菜病虫害测报技术规范 第2部分：软腐病 |
China National Standards Sect |
English PDF |
| GB/T 23392.1-2009 |
Technical specification for the forecast of diseases and inSects on cruciferous plants - Part 1: Pernospora parasitica (Pers.) Fr. 十字花科蔬菜病虫害测报技术规范 第1部分：霜霉病 |
China National Standards Sect |
English PDF |
| GB/T 13917.9-2009 |
Laboratory efficacy test methods and criterions of public health inSecticides for pesticide registration - Part 9: Repellent 农药登记用卫生杀虫剂室内药效试验及评价 第9部分：驱避剂 |
China National Standards Sect |
English PDF |
| GB/T 13917.8-2009 |
Laboratory efficacy test methods and criterions of public health inSecticides for pesticide registration - Part 8: Dutsable powder and chalk 农药登记用卫生杀虫剂室内药效试验及评价 第8部分：粉剂、笔剂 |
China National Standards Sect |
English PDF |
| GB/T 13917.7-2009 |
Laboratory efficacy test methods and criterions of public health inSecticides for pesticide registration - Part 7: Bait 农药登记用卫生杀虫剂室内药效试验及评价 第7部分：饵剂 |
China National Standards Sect |
English PDF |
| GB/T 13917.6-2009 |
Laboratory efficacy test methods and criterions of public health inSecticides for pesticide registration - Part 6: Liquid vaporizer 农药登记用卫生杀虫剂室内药效试验及评价 第6部分：电热蚊香液 |
China National Standards Sect |
English PDF |
| GB/T 13917.5-2009 |
Laboratory efficacy test methods and criterions of public health inSecticides for pesticide registration - Part 5: Vaporizing mat 农药登记用卫生杀虫剂室内药效试验及评价 第5部分： 电热蚊香片 |
China National Standards Sect |
English PDF |
| GB/T 13917.4-2009 |
Laboratory efficacy test methods and criterions of public health inSecticides for pesticide registration - Part 4: Mosquito coil 农药登记用卫生杀虫剂室内药效试验及评价 第4部分：蚊香 |
China National Standards Sect |
English PDF |
| GB/T 13917.3-2009 |
Laboratory efficacy test methods and criterions of public health inSecticides for pesticide registration - Part 3: Smoke generator and smoke tablet 农药登记用卫生杀虫剂室内药效试验及评价 第3部分： 烟剂及烟片 |
China National Standards Sect |
English PDF |
| GB/T 13917.2-2009 |
Laboratory efficacy test methods and criterions of public health inSecticides for pesticide registration - Part 2: Aerosol 农药登记用卫生杀虫剂室内药效试验及评价 第2部分：气雾剂 |
China National Standards Sect |
English PDF |
| GB/T 13917.1-2009 |
Laboratory efficacy test methods and criterions of public health inSecticides for pesticide registration - Part 1: Spray fluid 农药登记用卫生杀虫剂室内药效试验及评价 第1部分： 喷射剂 |
China National Standards Sect |
English PDF |
| GB/T 13917.10-2009 |
Laboratory efficacy test methods and criterions of public health inSecticides for pesticide registration - Part 10: Analogous site 农药登记用卫生杀虫剂室内药效试验及评价 第10部分：模拟现场 |
China National Standards Sect |
English PDF |
| GB/T 19290.5-2009 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25mm equipment practice - Extended detail specification - Dimensions for subrack 发展中的电子设备构体机械结构模数序列 第2-3部分：分规范 25mm设备构体的接口协调尺寸 扩展的详细规范 插箱、机箱、背板、面板和插件的尺寸 |
China National Standards Sect |
English PDF |
| GB/T 19290.4-2009 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subrac 发展中的电子设备构体机械结构模数序列 第2-2部分：分规范 25mm设备构体的接口协调尺寸 详细规范 插箱、机箱、背板、面板和插件的尺寸 |
China National Standards Sect |
English PDF |
| GB/T 23222-2008 |
Grade and investigation method of tobacco diseases and inSect pests 烟草病虫害分级及调查方法 |
China National Standards Sect |
English PDF |
| GB/T 19290.3-2008 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-1: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Detail specification - Dimensions for cabinets and r 发展中的电子设备构体机械结构模数序列 第2-1部分：分规范 25mm设备构体的接口协调尺寸 详细规范 机柜和机架的尺寸 |
China National Standards Sect |
English PDF |
| GB 14048.9-2008 |
Low-voltage switchgear and controlgear - Section 6-2: Multiple function equipment control and protective switching devices (or equipment) (CPS) 低压开关设备和控制设备 第6-2部分：多功能电器（设备）控制与保护开关电器（设备）(CPS) |
China National Standards Sect |
English PDF |
| GB/T 22296-2008 |
Textile machinery - High precision Sectional warping machine 纺织机械 高精度分段整经机 |
China National Standards Sect |
English PDF |
| GB/T 706-2008 |
Hot rolled Section steel 热轧型钢 |
China National Standards Sect |
English PDF |
| GB/T 6725-2008 |
Cold forming steel Sections 冷弯型钢 |
China National Standards Sect |
English PDF |
| GB/T 6726-2008 |
Cold forming Sectional steel for vehicles - Dimensions, shape, weight and tolerances 汽车用冷弯型钢尺寸、外形、重量及允许偏差 |
China National Standards Sect |
English PDF |
| GB/T 6723-2008 |
Cold forming Sectional steel - Open sectional steel for general structure - Dimensions, shape, weight and permissible tolerances 通用冷弯开口型钢尺寸、外形、重量及允许偏差 |
China National Standards Sect |
English PDF |
| GB 4706.76-2008 |
Household and similar electrical appliances-Safety - Particular requirements for inSect killers 家用和类似用途电器的安全 灭虫器的特殊要求 |
China National Standards Sect |
English PDF |
| GB/T 4656-2008 |
Technical drawings - Simplified representation of bars and profile Sections 技术制图 棒料、型材及其断面的简化表示法 |
China National Standards Sect |
English PDF |
| Find out:446Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
