Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 18688-2023 |
Agricultural irrigation equipment - Pressure loss in irrigation valves - Test methods {译} 农业灌溉设备 灌溉阀的压力损失 试验方法 |
China National Standards Test method pressure |
 English PDF |
| GB/T 43073-2023 |
Pneumatics - Test method for measuring sound pressure levels of exhaust mufflers {译} 气动 测量排气消声器声压级的试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 29918-2023 |
Test method for pressure-composition isotherm (PCI) of rare earth hydrogen storage alloys {译} 稀土系储氢合金 压力-组成等温线（PCI）的测试方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 42610-2023 |
Test method for compatibility between plastic liner and hydrogen gas of high-pressure hydrogen cylinder {译} 高压氢气瓶塑料内胆和氢气相容性试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 42191-2023 |
MEMS piezoresistive pressure sensitive device performance test method {译} MEMS压阻式压力敏感器件性能试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/Z 41506-2022 |
Hydraulic transmission - Fatigue pressure test for metal pressure shells - Evaluation method {译} 液压传动 金属承压壳体的疲劳压力试验 评价方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 5073-2022 |
Refractory materials - Pressure creep test method {译} 耐火材料 压蠕变试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 12085.23-2022 |
Optics and photonics - Environmental test methods - Part 23: Combined test for low pressure and low temperature, atmospheric temperature, high temperature or damp heat {译} 光学和光子学 环境试验方法 第23部分：低压与低温、大气温度、高温或湿热综合试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 12085.8-2022 |
Optics and photonics - Environmental test methods - Part 8: High internal pressure, low internal pressure, immersion {译} 光学和光子学 环境试验方法 第8部分：高内压、低内压、浸没 |
China National Standards Test method pressure |
English PDF |
| GB/T 1038.2-2022 |
Plastics - Films and sheets - Test methods for gas permeability - Part 2: Equal pressure method {译} 塑料制品 薄膜和薄片 气体透过性试验方法 第2部分：等压法 |
China National Standards Test method pressure |
English PDF |
| GB/T 1038.1-2022 |
Plastics - Films and sheets - Test methods for gas permeability - Part 1: Differential pressure method {译} 塑料制品 薄膜和薄片 气体透过性试验方法 第1部分：差压法 |
China National Standards Test method pressure |
English PDF |
| GB/T 41872-2022 |
Heat exchangers used in refrigeration systems and heat pumps—Temperature, pressure and velocity three-field synergy performance test and evaluation method {译} 制冷系统及热泵用换热器 温度、压力和速度三场协同的性能测试和评价方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 15623.3-2022 |
Hydraulic transmission - Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves {译} 液压传动 电调制液压控制阀 第3部分：压力控制阀试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 42057-2022 |
Pressure test methods for submersibles and their pressure equipment {译} 潜水器及其承压设备压力试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 20081.3-2021 |
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate characteristics of pressure regulators 气动 减压阀和过滤减压阀 第3部分：测试减压阀流量特性的可选方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 20081.2-2021 |
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 2: Test methods to determine the main characteristics to be included in literature from suppliers 气动 减压阀和过滤减压阀 第 2 部分：评定商务文件中应包含的主要特性的试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 39794.2-2021 |
Test method for wind uplift resistance of mental roof—Part 2:Dynamic pressure method 金属屋面抗风掀性能检测方法 第2部分：动态压力法 |
China National Standards Test method pressure |
English PDF |
| GB/T 39748.7-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第7部分：称重法测定压力作用下的吸液量 |
China National Standards Test method pressure |
English PDF |
| GB/T 39956.2-2021 |
Pneumatic fluid power—Electro-pneumatic pressure control valves—Part 2: Test methods to determine main characteristics to include in the supplier's literature 气动 电-气压力控制阀 第2部分：评定商务文件中应包含的主要特性的试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 39794.1-2021 |
Test method for wind uplift resistance of metal roof -- Part 1: Static pressure method 金属屋面抗风掀性能检测方法 第1部分：静态压力法 |
China National Standards Test method pressure |
English PDF |
| GB/T 19934.1-2021 |
Hydraulic fluid power—Fatigue pressure testing of metal pressure-containing envelopes—Part 1: Test method 液压传动 金属承压壳体的疲劳压力试验 第1部分：试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 2423.27-2020 |
Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests 环境试验 第2部分：试验方法 试验方法和导则：温度/低气压或温度/湿度/低气压综合试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 39709-2020 |
Test methods of multiple units glass, windiows static pressure and windiows sealing performance 动车组玻璃、车窗耐静压及车窗密封性能试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 39383-2020 |
Thermoplastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type joints 埋地用无压热塑性塑料管道系统 弹性密封圈接头的密封性能试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 39379-2020 |
Thermoplastics piping systems for non-pressure applications—Test method for watertightness 无压热塑性塑料管道系统 水密性试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 15331-2020 |
Test method for water vapor transmission rate of pressure-sensitive tapes 压敏胶粘带水蒸气透过率试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 15330-2020 |
Test method for water penetration rate of pressure-sensitive tapes 压敏胶粘带水渗透率试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.8-2019 |
Test method for pressure vessels lined with plastics—Part 8:High-resistance testing 塑料衬里压力容器试验方法 第8部分：耐高电阻试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.7-2019 |
Test method for pressure vessels lined with plastics—Part 7:Leakage testing 塑料衬里压力容器试验方法 第7部分：泄漏试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.6-2019 |
Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing 塑料衬里压力容器试验方法 第6部分：耐压试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.5-2019 |
Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection 塑料衬里压力容器试验方法 第5部分：冷热循环检验 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.4-2019 |
Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection 塑料衬里压力容器试验方法 第4部分：耐负压检验 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.3-2019 |
Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.2-2019 |
Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.1-2019 |
Test method for pressure vessels lined with plastics—Part 1:Spark testing 塑料衬里压力容器试验方法 第1部分：电火花试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.7-2019 |
Test method for pressure vessels lined with plastics—Part 7:Leakage testing 塑料衬里压力容器试验方法 第7部分：泄漏试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.6-2019 |
Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing 塑料衬里压力容器试验方法 第6部分：耐压试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.5-2019 |
Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection 塑料衬里压力容器试验方法 第5部分：冷热循环检验 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.4-2019 |
Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection 塑料衬里压力容器试验方法 第4部分：耐负压检验 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.3-2019 |
Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.2-2019 |
Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 37825-2019 |
Test method for simulating wind pressure resistance of building glass under the uniform static loads 建筑玻璃均布静载模拟风压试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 2423.63-2019 |
Environmental testing—Part 2:Test methods—Test:combined temperature(cold and heat)/low air pressure/vibration(mixed mode) 环境试验 第2部分:试验方法 试验:温度(低温、高温)/低气压/振动(混合模式)综合 |
China National Standards Test method pressure |
English PDF |
| GB/T 32065.14-2019 |
Environmental test methods for oceanographic instruments—Part 15：Hydrostatic pressure test 海洋仪器环境试验方法 第14部分:振动试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 36580-2018 |
Test method of model propeller for cavitation observation and pressure fluctuation measurement 船舶螺旋桨空泡脉动压力模型试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 6881.2-2017 |
Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Engineering methods for small movable sources in reverberant fields—Comparison method for a hard-walled test room 声学 声压法测定噪声源声功率级和声能量级 混响场内小型可移动声源工程法 硬壁测试室比较法 |
China National Standards Test method pressure |
English PDF |
| GB/T 9252-2017 |
Method for pressure cycling test of gas cylinders 气瓶压力循环试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 34544-2017 |
Safety test methods for onboard low pressure hydrogen storage devices for small fuel cell vehicles 小型燃料电池车用低压储氢装置安全试验方法 |
China National Standards Test method pressure |
English PDF |
| GB 26149-2017 |
Performance requirements and test methods of tire pressure monitoring system for passenger cars 乘用车轮胎气压监测系统的性能要求和试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 33896-2017 |
Test method for cyclic pressure of membrane housing 分离膜外壳循环压力试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 33922-2017 |
Wafer level test methods for MEMS piezoresistive pressure-sensitive die performances MEMS压阻式压力敏感芯片性能的圆片级试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 24218.16-2017 |
Textiles—Test methods for nonwovens—Part 16: Determination of resistance to penetration by water(hydrostatic pressure) 纺织品 非织造布试验方法 第16部分：抗渗水性的测定(静水压法) |
China National Standards Test method pressure |
English PDF |
| GB/T 8243.6-2017 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 6: Static burst pressure test 内燃机全流式机油滤清器试验方法 第6部分：静压耐破度试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 33488.4-2017 |
Test method of pressure equipments of thermoplastics welded for chemicals—Part 4:Ultrasonic examination 化工用塑料焊接制承压设备检验方法 第4部分：超声检测 |
China National Standards Test method pressure |
English PDF |
| GB/T 33488.1-2017 |
Test method of pressure equipments of thermoplastics welded for chemicals—Part 1: General requirements 化工用塑料焊接制承压设备检验方法 第1部分：总则 |
China National Standards Test method pressure |
English PDF |
| GB/T 33488.3-2017 |
Test method of pressure equipments of thermoplastics welded for chemicals—Part 3: Radiographic examination 化工用塑料焊接制承压设备检验方法 第3部分：射线检测 |
China National Standards Test method pressure |
English PDF |
| GB/T 33488.2-2017 |
Test method of pressure equipments of thermoplastics welded for chemicals—Part 2: Visual examination 化工用塑料焊接制承压设备检验方法 第2部分：外观检测 |
China National Standards Test method pressure |
English PDF |
| GB/T 5169.21-2017 |
Fire hazard testing for electric and electronic products—Part 21: Abnormal heat—Ball pressure test method 电工电子产品着火危险试验 第21部分：非正常热 球压试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 5170.10-2017 |
Inspection methods for environmental testing equipments—Part 10：Combined high and low temperature/low air pressure testing equipments 环境试验设备检验方法 第10部分：高低温低气压试验设备 |
China National Standards Test method pressure |
English PDF |
| GB/T 32491-2016 |
Test method for long-Term hydrostatic pressure of glass fiber reinforced thermosetting resin pipe and fittings 玻璃纤维增强热固性树脂管及管件长期静水压试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 8243.13-2015 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings 内燃机全流式机油滤清器试验方法 第13部分：复合材料滤清器的静压耐破度试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 15478-2015 |
Test methods of the performances for pressure transducer/sensor 压力传感器性能试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 25151.6-2014 |
Fabrication and inspection method for high pressure urea equipment―Part 6: Helium leakage test method for urea high pressure equipment 尿素高压设备制造检验方法 第6部分：尿素高压设备氦渗漏试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 7994.1-2014 |
Test method of glass-lined equipments—Part 1: Hydraulic pressure test 搪玻璃设备试验方法 第1部分：水压试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 30048-2013 |
Test method for characteristic of pressure filtration of slime 煤泥压滤性试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 29907-2013 |
Test method for watertightness of curtain walls under dynamic wind pressure 建筑幕墙动态风压作用下水密性能检测方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 2423.41-2013 |
Environmental testing - Part 2: Test methods - Wind pressure 环境试验 第2部分：试验方法 风压 |
China National Standards Test method pressure |
English PDF |
| GB/T 4744-2013 |
Textiles - Testing and evaluation for water resistance - Hydrostatic pressure method 纺织品 防水性能的检测和评价 静水压法 |
China National Standards Test method pressure |
English PDF |
| GB/T 29459.2-2012 |
Small punch test methods of metallic materials for in-service pressure equipments - Part 2：Method of test for tensile properties at room temperature 在役承压设备金属材料小冲杆试验方法 第2部分：室温下拉伸性能的试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 29459.1-2012 |
Small punch test methods of metallic materials for in-service pressure equipments - Part 1：General requirements 在役承压设备金属材料小冲杆试验方法 第1部分：总则 |
China National Standards Test method pressure |
English PDF |
| GB/T 18688-2012 |
Agricultural irrigation equipment - Pressure losses in irrigation valves - Test method 农业灌溉设备 灌溉阀的压力损失 试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 8017-2012 |
Standard test method for vapor pressure of petroleum products (Reid Method) 石油产品蒸气压的测定 雷德法 |
China National Standards Test method pressure |
English PDF |
| GB/T 15623.3-2012 |
Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves 液压传动 电调制液压控制阀 第3部分：压力控制阀试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 27726-2011 |
Thermoplastics valves - Pressure test methods and requirements 热塑性塑料阀门压力试验方法及要求 |
China National Standards Test method pressure |
English PDF |
| GB/T 26961-2011 |
Hydraulic pressure test method of graphite lined equipment 不透性石墨设备水压试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 11059-2011 |
Standard test method for determination of vapor pressure of crude oil:VPCRx (expansion method) 原油蒸气压的测定 膨胀法 |
China National Standards Test method pressure |
English PDF |
| GB/T 26729-2011 |
Agricultural irrigation equipment - PVC above-ground low-pressure pipe for surface irrigation - Specifications and test methods 农业灌溉设备 地表灌溉用聚氯乙烯（PVC）低压管 技术规范和试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 12085.21-2011 |
Optics and optical instruments - Environmental test methods - Part 21: Combined low pressure and ambient temperature or dry heat 光学和光学仪器 环境试验方法 第21部分：低压与大气温度、高温综合试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 12085.19-2011 |
Optics and optical instruments - Environmental test methods - Part 19: Combined damp heat and low internal pressure 光学和光学仪器 环境试验方法 第19部分：温度周期与正弦振动、随机振动综合试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 12085.18-2011 |
Optics and optical instruments - Environmental test methods - Part 18: Combined damp heat and low internal pressure 光学和光学仪器 环境试验方法 第18部分：湿热、低内压综合试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 12085.8-2010 |
Optics and optical instruments - Environmental test methods - Part 8: High pressure,low pressure,immersion 光学和光学仪器 环境试验方法 第8部分：高压、低压、浸没 |
China National Standards Test method pressure |
English PDF |
| GB/T 12085.5-2010 |
Optics and optical instruments - Environmental test methods - Part 5: Combined cold, low air pressure 光学和光学仪器 环境试验方法 第5部分：低温、低气压综合试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 6536-2010 |
Standard test method for distillation of petroleum products at atmospheric pressure 石油产品常压蒸馏特性测定法 |
China National Standards Test method pressure |
English PDF |
| GB/T 25151.5-2010 |
Fabrication and inspection method for high pressure urea equipment - Part 5: Ammonia leakage test method for urea high pressure equipment 尿素高压设备制造检验方法 第5部分：尿素高压设备氨渗漏试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 25151.4-2010 |
Fabrication and inspection method for high pressure urea equipment - Part 4: Intergranular corrosion tendency test specimen preparation for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade 尿素高压设备制造检验方法 第4部分：尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验的试样制取 |
China National Standards Test method pressure |
English PDF |
| GB/T 25151.3-2010 |
Fabrication and inspection method for high pressure urea equipment - Part 3: Intergranular corrosion tendency test for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade 尿素高压设备制造检验方法 第3部分：尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 25132-2010 |
Hydraulic fluid power - Filters - Test method for differential pressure devices 液压过滤器 压差装置试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.6-2009 |
Hydrostatic pressure test method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 压力试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.5-2009 |
Expansion and contraction test method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 热胀冷缩试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.4-2009 |
Vacuum test method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 耐真空试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.3-2009 |
High temperature test method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 耐高温试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.2-2009 |
Low temperature test method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 耐低温试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 23711.1-2009 |
Spark test method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 电火花试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 13465.6-2009 |
Test method for hydraulic pressure bursting of impermeable graphite pipe 不透性石墨管水压爆破试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 11037-2009 |
Test method for strength and tightness of marine boiler and pressure vessel 船用锅炉及压力容器强度和密性试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 2423.59-2008 |
Environmental testing - Part 2: Test methods - Test Z/ABMFh: Combined temperature(cold and heat)/low air pressure/vibration（random） 电工电子产品环境试验 第2部分：试验方法 试验Z/ABMFh：温度（低温、高温）/低气压/振动（随机）综合 |
China National Standards Test method pressure |
English PDF |
| GB/T 2423.26-2008 |
Environmental testing - Part 2: Tests methods - Test Z/BM: Combined dry heat/low air pressure tests 电工电子产品环境试验 第2部分：试验方法 试验Z/BM：高温/低气压综合试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 2423.25-2008 |
Environmental testing - Part 2: Tests methods - Test Z/AM: Combined cold/low air pressure tests 电工电子产品环境试验 第2部分：试验方法 试验Z/AM：低温/低气压综合试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 2423.21-2008 |
Environmental testing - Part 2: Test methods - Test M: Low air pressure 电工电子产品环境试验 第2部分：试验方法 试验M：低气压 |
China National Standards Test method pressure |
English PDF |
| GB/T 4546-2008 |
Glass containers - Internal pressure resistance - Test methods 玻璃容器 耐内压力试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 14271-2008 |
Test method for the determination of scoured yield raw wool - Oil pressure method 毛绒净毛率试验方法 油压法 |
China National Standards Test method pressure |
English PDF |
| GB/T 9966.8-2008 |
Test methods for natural facing stones - Part 8: Test method for structural performance of dimension stone cladding systems by uniform static pressure difference 天然饰面石材试验方法 第8部分: 用均匀静态压差检测石材挂装系统结构强度试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 22052-2008 |
Test method for vapor pressure - Temperature relationship and initial decompostition temperature of liquids by isoteniscope 用液体蒸气压力计测定液体的蒸气压力 温度关系和初始分解温度的方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 2951.31-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 31:Methods specific to PVC compounds - Pressure test at high temperature - Test for resistance to cracking 电缆和光缆绝缘和护套材料通用试验方法 第31部分：聚氯乙烯混合料专用试验方法 高温压力试验-抗开裂试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 5170.10-2008 |
Inspection methods for environmental testing equipments for electric and electronic products - Combined high and low temperature/low air pressure testing equipments 电工电子产品环境试验设备检验方法 高低温低气压试验设备 |
China National Standards Test method pressure |
English PDF |
| GB/T 2423.102-2008 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test: combined temperature(cold and heat)/low air pressure/vibration（sinusoidal） 电工电子产品环境试验 第2部分：试验方法 试验：温度（低温、高温）/低气压/振动（正弦）综合 |
China National Standards Test method pressure |
English PDF |
| GB/T 21616-2008 |
Dangerous goods - Test method for vapour pressure of flammable liquids 危险品 易燃液体蒸汽压力试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 21596-2008 |
Dangerous goods - Pressure test method for portable tank 危险品 便携式罐体压力试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 21579-2008 |
Dangerous goods - Test method of time/pressure 危险品 时间/压力试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 12245-2006 |
Methods of performance test for pressure reducing valves 减压阀 性能试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 20631.2-2006 |
Pressure sensitive adhesive tapes for electrical purposes - Part 2: Methods of test 电气用压敏胶粘带 第2部分：试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 4937.2-2006 |
Semiconductor devices―Mechanical and climatic test methods―Part 2: Low air pressure 半导体器件 机械和气候试验方法 第2部分:低气压 |
China National Standards Test method pressure |
English PDF |
| GB/T 20183.3-2006 |
Equipment for crop protection - Spraying equipment - Part 3: Test methods for volume/hectare adjustment systems of agricultural hydraulic pressure sprayers 植物保护机械 喷雾设备 第3部分:农业液力喷雾机每公顷施液量调节系统试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 8243.6-2006 |
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test 内燃机全流式机油滤清器试验方法 第6部分：静压耐破度试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 20081.2-2006 |
Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers 气动减压阀和过滤减压阀 第2部分:评定商务文件中应包含的主要特性的测试方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 19934.1-2005 |
Hydraulic fluid power-Fatigue pressure testing of metal pressure-containing envelopes-Part 1:Test method 液压传动 金属承压壳体的疲劳压力试验 第1部分：试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 18570.3-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分：涂覆涂料前钢材表面的灰尘评定(压敏粘带法) |
China National Standards Test method pressure |
English PDF |
| GB/T 5170.17-2005 |
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined sequential cold low air pressure And damp heat testing equipments 电工电子产品环境试验设备 基本参数检定方法 低温/低气压/湿热综合顺序试验设备 |
China National Standards Test method pressure |
English PDF |
| GB/T 2423.27-2005 |
Environmental testing for electric and electronic products-Part 2:Test Methods Test Z/AMD:Combined sequential cold,low air pressure and damp heat test 电工电子产品环境试验 第2部分：试验方法 试验Z/AMD：低温/低气压/湿热连续综合试验 |
China National Standards Test method pressure |
English PDF |
| GB/T 6058-2005 |
Test method for preparation and internal pressure testing of filament-wound pressure vessels 纤维缠绕压力容器制备和内压试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 19471.2-2004 |
Plastics piping systems--Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride)(PVC-U)for use with PVC-U pipes--Test method for leaktightness under negative pressure 塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 负压密封试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 19471.1-2004 |
Plastics piping systems--Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride)(PVC-U)pipes--Test method forleaktighness under internal pressure and angular deflection 塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 偏角密封试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 8243.3-2003 |
Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 3: Resistance to high differential pressure and to elevated temperature 内燃机全流式机油滤清器试验方法 第3部分: 耐高压差和耐高温特性 |
China National Standards Test method pressure |
English PDF |
| GB/T 8243.1-2003 |
Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 1: Differential pressure/flow characteristics 内燃机全流式机油滤清器试验方法 第1部分:压差-流量特性 |
China National Standards Test method pressure |
English PDF |
| GB/T 6111-2003 |
Thermoplastics pipes for the conveyance of fluids--Resistance to internal pressure--Test method 流体输送用热塑性塑料管材耐内压试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 4852-2002 |
Test method for tack of pressure sensitive adhesive tapes by rolling ball 压敏胶粘带初粘性试验方法(滚球法) |
China National Standards Test method pressure |
English PDF |
| GB/T 4850-2002 |
Test method for unwinding force of pressure sensitive adhesive tapes at low speed 压敏胶粘带低速解卷强度的测定 |
China National Standards Test method pressure |
English PDF |
| GB/T 6881.3-2002 |
Acoustics--Determination of sound power levels of noise sources-using sound pressure--Engineering methods for small，movable sources in reverberant fields--Part 2:Methods for special reverberation test rooms 声学 声压法测定噪声源声功率级 混响场中小型可移动声源工程法 第2部分:专用混响测试室法 |
China National Standards Test method pressure |
English PDF |
| GB/T 17782-1999 |
Rubber，vulcanized--Test method of aging by heat and air pressure 硫化橡胶压力空气热老化试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 12583-1998 |
Standard test method for measurement of extreme-pressure properties of lubricating fluids(four-ball method) 润滑剂极压性能测定法(四球法) |
China National Standards Test method pressure |
English PDF |
| GB/T 15903-1995 |
Test method for flame resistance of pressure-sensitive adhesive tapes 压敏胶粘带耐燃性试验方法 悬挂法 |
China National Standards Test method pressure |
English PDF |
| GB/T 15560-1995 |
Standard test method for short-time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluids 流体输送用塑料管材液压瞬时爆破和耐压试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 15478-1995 |
Test methods of the performances for pressuretransducer/sensor 压力传感器性能试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 15331-1994 |
Test method for water vapor transmission of pressure-sensitive tapes 压敏胶粘带水蒸汽透过率试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 15330-1994 |
Test method for water penetration rate of pressure-sensitive tapes 压敏胶粘带水渗透率试验方法 |
China National Standards Test method pressure |
English PDF |
| GB/T 8105-1987 |
Hydraulic fluid power--Valves--Testing method of pressure control valves 压力控制阀试验方法 |
China National Standards Test method pressure |
English PDF |
| Find out:136Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
