Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 10067.101-2023 |
Basic technical conditions for electrothermal and electromagnetic treatment devices Part 101: General requirements for Vacuum electrothermal and electromagnetic treatment devices {译} 电热和电磁处理装置基本技术条件 第101部分：真空电热和电磁处理装置的通用要求 |
China National Standards Vacuum |
 English PDF |
| GB/T 43298-2023 |
General technical conditions for Vacuum drainage integrated equipment {译} 真空排水集成设备通用技术条件 |
China National Standards Vacuum |
English PDF |
| GB/T 19699-2023 |
Ships and Offshore Technology Cargo Tank Pressure-Vacuum Valves and Flame Arrestors {译} 船舶和海上技术 液货舱压力-真空阀和阻火装置 |
China National Standards Vacuum |
English PDF |
| GB/T 22561-2023 |
Vacuum heat treatment {译} 真空热处理 |
China National Standards Vacuum |
English PDF |
| GB/T 42604-2023 |
Vacuum technology - Vacuum gauges - Specification for hot cathode ionization vacuum gauges {译} 真空技术 真空计 热阴极电离真空计规范 |
China National Standards Vacuum |
English PDF |
| GB/Z 42625-2023 |
Vacuum technology Vacuum gauges Quadrupole mass spectrometer characteristics for partial pressure measurement {译} 真空技术 真空计 用于分压力测量的四极质谱仪特性 |
China National Standards Vacuum |
English PDF |
| GB/Z 42624-2023 |
Vacuum technology - Vacuum gauges - Testing and reporting procedures for outgassing rates {译} 真空技术 真空计 放气率的测试和报告程序 |
China National Standards Vacuum |
English PDF |
| GB/T 25441-2022 |
Vacuum cleaner motor {译} 吸尘器电机 |
China National Standards Vacuum |
English PDF |
| GB/T 42091-2022 |
Specification for smelting and ingot casting of Vacuum steel ingots for large steel forgings {译} 大型锻钢件用真空钢锭的冶炼与铸锭规范 |
China National Standards Vacuum |
English PDF |
| GB/T 41743-2022 |
Rapid detection and evaluation method of Vacuum glass insulation performance and its attenuation - unsteady state method {译} 真空玻璃保温性能及其衰减快速检测评估方法 非稳态法 |
China National Standards Vacuum |
English PDF |
| GB/T 40355-2021 |
Stainless steel Vacuum container 不锈钢真空保温容器 |
China National Standards Vacuum |
English PDF |
| GB/T 40344.2-2021 |
Vacuum technology—Standard methods for measuring vacuum-pump performance— Part 2：Positive displacement vacuum pumps 真空技术 真空泵性能测量标准方法 第2部分：容积真空泵 |
China National Standards Vacuum |
English PDF |
| GB/T 40344.1-2021 |
Vacuum technology—Standard methods for measuring vacuum-pump performance—Part 1：General description 真空技术 真空泵性能测量标准方法 第1部分：总体要求 |
China National Standards Vacuum |
English PDF |
| GB/T 38048.2-2021 |
Surface cleaning appliances—Part 2: Dry Vacuum cleaners for household or similar use一Methods for measuring the performance 表面清洁器具 第2部分：家用和类似用途干式真空吸尘器 性能测试方法 |
China National Standards Vacuum |
English PDF |
| GB/T 40333-2021 |
Vacuum gauges—Definitions and specifications for quadrupole mass spectrometers 真空计 四极质谱仪的定义与规范 |
China National Standards Vacuum |
English PDF |
| GB/T 15717-2021 |
Test method for Vacuum-deposited metal thickness—Electric resistance method 真空金属镀层厚度测试方法 电阻法 |
China National Standards Vacuum |
English PDF |
| GB/T 39194-2020 |
Technical requirement of heat treatment for Vacuum low pressure carburizing high pressure gas quenching 真空低压渗碳高压气淬热处理技术要求 |
China National Standards Vacuum |
English PDF |
| GB/T 4214.2-2020 |
Test method for noise of household and similar electrical appliances—Particular requirements for Vacuum cleaners 家用和类似用途电器噪声测试方法 真空吸尘器的特殊要求 |
China National Standards Vacuum |
English PDF |
| GB/T 38586-2020 |
Vacuum insulating glass 真空玻璃 |
China National Standards Vacuum |
English PDF |
| GB/T 17475-2020 |
Standard test method for distillation of heavy hydrocarbon mixtures—Vacuum potstill method 重烃类混合物蒸馏试验 真空釜式蒸馏法 |
China National Standards Vacuum |
English PDF |
| GB/T 39704-2020 |
Determination of effective thermal conductivity for Vacuum insulation panels(VIP) 真空绝热板有效导热系数的测定 |
China National Standards Vacuum |
English PDF |
| GB/T 39548-2020 |
Determination of retention rate on thermal resistance of Vacuum insulation panels(VIP) in hygrothermal conditions 真空绝热板湿热条件下热阻保留率的测定 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.4-2019 |
Static Vacuum insulated cryogenic pressure vessels—Part 4：Fabrication 固定式真空绝热深冷压力容器 第4部分：制造 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.3-2019 |
Static Vacuum insulated cryogenic pressure vessels—Part 3：Design 固定式真空绝热深冷压力容器 第3部分：设计 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.2-2019 |
Static Vacuum insulated cryogenic pressure vessels—Part 2:Materials 固定式真空绝热深冷压力容器 第2部分:材料 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.1-2019 |
Static Vacuum insulated cryogenic pressure vessels—Part 1:General requirements 固定式真空绝热深冷压力容器 第1部分:总则 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.6-2019 |
Static Vacuum insulated cryogenic pressure vessels—Part 6：Safety protection 固定式真空绝热深冷压力容器 第6部分：安全防护 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.5-2019 |
Static Vacuum insulated cryogenic pressure vessels—Part 5：Inspection and testing 固定式真空绝热深冷压力容器 第5部分：检验与试验 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.4-2019 |
Static Vacuum insulated cryogenic pressure vessels—Part 4：Fabrication 固定式真空绝热深冷压力容器 第4部分：制造 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.3-2019 |
Static Vacuum insulated cryogenic pressure vessels—Part 3：Design 固定式真空绝热深冷压力容器 第3部分：设计 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.2-2019 |
Static Vacuum insulated cryogenic pressure vessels—Part 2:Materials 固定式真空绝热深冷压力容器 第2部分:材料 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.1-2019 |
Static Vacuum insulated cryogenic pressure vessels—Part 1:General requirements 固定式真空绝热深冷压力容器 第1部分:总则 |
China National Standards Vacuum |
English PDF |
| GB/T 37869.4-2019 |
Glass containers—Vacuum lug finishes—Part 4: 3 leads 38 medium 玻璃容器 真空凸缘瓶口 第4部分：三旋38中等规格 |
China National Standards Vacuum |
English PDF |
| GB/T 37869.3-2019 |
Glass containers—Vacuum lug finishes—Part 3: 3 leads 38 regular 玻璃容器 真空凸缘瓶口 第3部分：三旋38普通规格 |
China National Standards Vacuum |
English PDF |
| GB/T 37608-2019 |
Vacuum insulation panels (VIP) 真空绝热板 |
China National Standards Vacuum |
English PDF |
| GB/T 37502-2019 |
Copper nickel alloy rods for Vacuum electron devices structure material 电真空器件结构材料用铜镍合金棒 |
China National Standards Vacuum |
English PDF |
| GB 51343-2018 |
Vacuum electronic device production line equipment installation technical standards 真空电子器件生产线设备安装技术标准 |
China National Standards Vacuum |
English PDF |
| GB/T 35049-2018 |
Vacuum technology—Leak testing method by quadrupole mass spectrometer 真空技术 四极质谱检漏方法 |
China National Standards Vacuum |
English PDF |
| GB/T 36176-2018 |
Vacuum technology—Vacuum leak testing method by helium mass spectrometer 真空技术 氦质谱真空检漏方法 |
China National Standards Vacuum |
English PDF |
| GB/T 4060-2018 |
Test method for boron content in polycrystalline silicon by Vacuum zone-melting method 硅多晶真空区熔基硼检验方法 |
China National Standards Vacuum |
English PDF |
| GB/T 34876-2017 |
Vacuum technology—Vacuum gauges—Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge 真空技术 真空计 与标准真空计直接比较校准结果的不确定度评定 |
China National Standards Vacuum |
English PDF |
| GB/T 34873-2017 |
Vacuum gauges—Calibration by direct comparison with a reference gauge 真空计 与标准真空计直接比较校准 |
China National Standards Vacuum |
English PDF |
| GB/T 34878-2017 |
Vacuum technology—Valves—Leak test 真空技术 阀门 漏率测试 |
China National Standards Vacuum |
English PDF |
| GB/T 15022.7-2017 |
Resin based reactive compounds used for electrical insulation—Part 7: Epoxy-anhydride Vacuum pressure impregnation(VPI) resin 电气绝缘用树脂基活性复合物 第7部分：环氧酸酐真空压力浸渍(VPI)树脂 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.7-2017 |
Static Vacuum insulated cryogenic pressure vessels— Part 7：Rules of pressure strengthening for inner vessels 固定式真空绝热深冷压力容器 第7部分：内容器应变强化技术规定 |
China National Standards Vacuum |
English PDF |
| GB/T 34517-2017 |
Evaluating method for spacecraft nonmetal materials outgassing in Vacuum 航天器用非金属材料真空出气评价方法 |
China National Standards Vacuum |
English PDF |
| GB/T 34522-2017 |
Thermal Vacuum test method for spacecraft 航天器热真空试验方法 |
China National Standards Vacuum |
English PDF |
| GB/T 34337-2017 |
Photovoltaic Vacuum glass 光伏真空玻璃 |
China National Standards Vacuum |
English PDF |
| GB/T 34338-2017 |
Test methods for determining mechanical properties of sealing glass for Vacuum glazing 真空玻璃用熔封玻璃力学性能试验方法 |
China National Standards Vacuum |
English PDF |
| GB/T 15022.8-2017 |
Resin based reactive compounds used for electrical insulation— Part 8：Epoxy modified unsaturated polyester Vacuum pressure impregnation (VPI) resin 电气绝缘用树脂基活性复合物 第8部分：环氧改性不饱和聚酯真空压力浸渍(VPI)树脂 |
China National Standards Vacuum |
English PDF |
| GB/T 33633-2017 |
Vacuum technology—Positive-displacement vacuum pump—Measurement of water vapour tolerance 真空技术 容积真空泵 水蒸气容限的测量 |
China National Standards Vacuum |
English PDF |
| GB/T 33638-2017 |
Vacuum technology—Turbomolecular pumps—Measurement of rapid shutdown torque 真空技术 涡轮分子泵 急停扭矩的测试 |
China National Standards Vacuum |
English PDF |
| GB/T 32221-2015 |
Vacuum technology—Vacuum thermal environmental simulation test equipment of spacecraft—General specification 真空技术 航天器用真空热环境模拟试验设备 通用技术条件 |
China National Standards Vacuum |
English PDF |
| GB/T 32218-2015 |
Vacuum technology—Test methods for leak rates of vacuum system 真空技术 真空系统漏率测试方法 |
China National Standards Vacuum |
English PDF |
| GB/T 25753.4-2015 |
Vacuum technology—Roots vacuum pump— Measurement of performance characteristics—Part 4: Measurement of noise 真空技术 罗茨真空泵性能测量方法 第4部分：噪声的测量 |
China National Standards Vacuum |
English PDF |
| GB/T 32293-2015 |
Vacuum technology—Selection of leak test methods for vacuum equipment 真空技术 真空设备的检漏方法选择 |
China National Standards Vacuum |
English PDF |
| GB/T 32292-2015 |
Vacuum techology—Ferrofluid rotary feedthroughs—Generic specification 真空技术 磁流体动密封件 通用技术条件 |
China National Standards Vacuum |
English PDF |
| GB/T 32062-2015 |
In-situ test method for degradation ratio of Vacuum degree of vacuum glazing—Photoelastic method 真空玻璃真空度衰减率现场检测方法 光弹法 |
China National Standards Vacuum |
English PDF |
| GB/T 10067.35-2015 |
Basic specifications for electroheat installations—Part 35: Medium frequency Vacuum induction melting furnace 电热装置基本技术条件 第35部分：中频真空感应熔炼炉 |
China National Standards Vacuum |
English PDF |
| GB/T 31480-2015 |
Materials for high Vacuum multilayer insulation of cryogenic vessel 深冷容器用高真空多层绝热材料 |
China National Standards Vacuum |
English PDF |
| GB 4706.7-2014 |
Household and similar electrical appliances―Safety―Particular requirements for Vacuum cleaners and water-suction cleaning appliances 家用和类似用途电器的安全 真空吸尘器和吸水式清洁器具的特殊要求 |
China National Standards Vacuum |
English PDF |
| GB/T 20291.1-2014 |
Vacuum cleaners for household use—Part 1：Dry vacuumcleaners—Methods for measuring the performance 家用真空吸尘器 第1部分：干式真空吸尘器 性能测试方法 |
China National Standards Vacuum |
English PDF |
| GB/T 31293-2014 |
Vacuum resin infusion molding epoxy for wind blade 风电叶片用真空导入环氧树脂 |
China National Standards Vacuum |
English PDF |
| GB/T 14594-2014 |
Oxygen-free copper sheets and strips for Vacuum electron devices 电真空器件用无氧铜板和带 |
China National Standards Vacuum |
English PDF |
| GB/T 10067.47-2014 |
Basic specifications for electroheat installations―Part 47: Vacuum heat treatment and brazing furnace 电热装置基本技术条件 第47部分：真空热处理和钎焊炉 |
China National Standards Vacuum |
English PDF |
| GB/T 10067.45-2014 |
Basic specifications for electroheat installations―Part 45: Vacuum quenching furnace 电热装置基本技术条件 第45部分：真空淬火炉 |
China National Standards Vacuum |
English PDF |
| GB/T 5567-2013 |
Rubber and plastics hoses and hose assemblies―Determination of resistance to Vacuum 橡胶和塑料软管及软管组合件 耐真空性能的测定 |
China National Standards Vacuum |
English PDF |
| GB/T 30434-2013 |
General specifications for resistance Vacuum gauge 电阻真空计通用技术条件 |
China National Standards Vacuum |
English PDF |
| GB/T 30040.2-2013 |
Leak detection systems―Part 2：Pressure and Vacuum systems 双层罐渗漏检测系统 第2部分：压力和真空系统 |
China National Standards Vacuum |
English PDF |
| GB/T 29606-2013 |
Stainless steel Vacuum flask 不锈钢真空杯 |
China National Standards Vacuum |
English PDF |
| GB/T 19699-2012 |
Ships and marine technology - Pressure/Vacuum valves for cargo tanks 船舶与海上技术 液货舱压力/真空阀 |
China National Standards Vacuum |
English PDF |
| GB/T 29251-2012 |
Vacuum ovens 真空干燥箱 |
China National Standards Vacuum |
English PDF |
| GB/T 50815-2013 |
Technical code of Vacuum concentration treatment for weak sulfuric acid 稀硫酸真空浓缩处理技术规范 |
China National Standards Vacuum |
English PDF |
| GB/T 28786-2012 |
Vacuum technology - Methods of bonding strength measurement for vacuum coating film - Measuring adhesion by tape test 真空技术 真空镀膜层结合强度测量方法 胶带粘贴法 |
China National Standards Vacuum |
English PDF |
| GB/T 27888.3-2011 |
Ship and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage,drain piping for Vacuum systems 船舶与海上技术 船舶与海上结构物的排水系统 第3部分: 真空系统的卫生水排放及排放管道 |
China National Standards Vacuum |
English PDF |
| GB/T 25753.3-2011 |
Vacuum technology - Roots vacuum pump - Measurement of performance characteristics - Part 3: Measurement of overflow valve differential pressure 真空技术 罗茨真空泵性能测量方法 第3部分：溢流阀压差的测量 |
China National Standards Vacuum |
English PDF |
| GB/T 11164-2011 |
Vacuum coating plant generic specification 真空镀膜设备通用技术条件 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.6-2011 |
Static Vacuum insulated cryogenic pressure vessel - Part 6：Safety device requirements 固定式真空绝热深冷压力容器 第6部分：安全防护 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.5-2011 |
Static Vacuum insulated cryogenic pressure vessel - Part 5: Inspection and test 固定式真空绝热深冷压力容器 第5部分：检验与试验 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.4-2011 |
Static Vacuum insulated cryogenic pressure vessel - Part 4: Fabrication 固定式真空绝热深冷压力容器 第4部分：制造 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.3-2011 |
Static Vacuum insulated cryogenic pressure vessel - Part 3：Design 固定式真空绝热深冷压力容器 第3部分：设计 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.2-2011 |
Static Vacuum insulated cryogenic pressure vessel - Part 2：Material 固定式真空绝热深冷压力容器 第2部分：材料 |
China National Standards Vacuum |
English PDF |
| GB/T 18442.1-2011 |
Static Vacuum insulated cryogenic pressure vessel - Part 1: General requirements 固定式真空绝热深冷压力容器 第1部分：总则 |
China National Standards Vacuum |
English PDF |
| GB/T 26917-2011 |
Dtermination method of filter aiding effect of flocculants in Vacuum filtration system 真空过滤系统中絮凝剂助滤效果测定方法 |
China National Standards Vacuum |
English PDF |
| GB/T 26056-2010 |
Vacuum hot press beryllium material 真空热压铍材 |
China National Standards Vacuum |
English PDF |
| GB/Z 25756-2010 |
Vacuum technology - Bakable flanges - Dimensions of knife-edge flanges 真空技术 可烘烤法兰 刀口法兰尺寸 |
China National Standards Vacuum |
English PDF |
| GB/T 25755-2010 |
Vacuum technology - Sputter-ion pumps - Measurement of performance characteristics 真空技术 溅射离子泵 性能参数的测量 |
China National Standards Vacuum |
English PDF |
| GB/T 25754-2010 |
Vacuum technology - Right-angle valve - Dimensions and interfaces for pneumatic actuator 真空技术 直角阀 尺寸和气动装置的接口 |
China National Standards Vacuum |
English PDF |
| GB/T 25753.2-2010 |
Vacuum technology - Roots vacuum pump - Measurement of performance characteristics - Part 2: Measurement of compression ratio of the zero throughput 真空技术 罗茨真空泵性能测量方法 第2部分：零流量压缩比的测量 |
China National Standards Vacuum |
English PDF |
| GB/T 25753.1-2010 |
Vacuum technology - Roots vacuum pump - Measurement of performance characteristics - Part 1: Measurement of maximum tolerable differential pressure 真空技术 罗茨真空泵性能测量方法 第1部分：最大允许压差的测量 |
China National Standards Vacuum |
English PDF |
| GB/T 16709.2-2010 |
Vacuum technology- Mounting dimensions of pipeline fittings Part 2: Knife-edge flange type 真空技术 管路配件的装配尺寸 第2部分：刀口法兰型 |
China National Standards Vacuum |
English PDF |
| GB/T 16709.1-2010 |
Vacuum technology - Mounting dimensions of pipeline fittings - Part 1: Non knife-edge flange type 真空技术 管路配件的装配尺寸 第1部分：非刀口法兰型 |
China National Standards Vacuum |
English PDF |
| GB/T 25941-2010 |
Plastic Vacuum forming machine 塑料真空成型机 |
China National Standards Vacuum |
English PDF |
| GB/T 25441-2010 |
The motors for Vacuum cleaners 吸尘器电机 |
China National Standards Vacuum |
English PDF |
| GB/T 8576-2010 |
Determination of free water for compound fertilizers - Vacuum oven method 复混肥料中游离水含量的测定 真空烘箱法 |
China National Standards Vacuum |
English PDF |
| GB/T 25143-2010 |
Specification of moulds for Vacuum thermoforming 真空成型模技术条件 |
China National Standards Vacuum |
English PDF |
| GB/T 18443.8-2010 |
Testing method of performance for Vacuum insulation cryogenic equipment - Part 8: Volume measurement 真空绝热深冷设备性能试验方法 第8部分：容积测量 |
China National Standards Vacuum |
English PDF |
| GB/T 18443.7-2010 |
Testing method of performance for Vacuum insulation cryogenic equipment - Part 7: Holding time measurement 真空绝热深冷设备性能试验方法 第7部分：维持时间测量 |
China National Standards Vacuum |
English PDF |
| GB/T 18443.6-2010 |
Testing method of performance for Vacuum insulation cryogenic equipment - Part 6: Heat-leak rate measurement 真空绝热深冷设备性能试验方法 第6部分：漏热量测量 |
China National Standards Vacuum |
English PDF |
| GB/T 18443.5-2010 |
Testing method of performance for Vacuum insulation cryogenic equipment - Part 5: Static evaporation rate measurement 真空绝热深冷设备性能试验方法 第5部分：静态蒸发率测量 |
China National Standards Vacuum |
English PDF |
| GB/T 18443.4-2010 |
Testing method of performance for Vacuum insulation cryogenic equipment - Part 4: Leak-outgassing rate measurement 真空绝热深冷设备性能试验方法 第4部分：漏放气速率测量 |
China National Standards Vacuum |
English PDF |
| GB/T 18443.3-2010 |
Testing method of performance for Vacuum insulation cryogenic equipment - Part 3: Leak rate measurement 真空绝热深冷设备性能试验方法 第3部分：漏率测量 |
China National Standards Vacuum |
English PDF |
| GB/T 18443.2-2010 |
Testing method of performance for Vacuum insulation cryogenic equipment - Part 2：Vacuum degree measurement 真空绝热深冷设备性能试验方法 第2部分：真空度测量 |
China National Standards Vacuum |
English PDF |
| GB/T 18443.1-2010 |
Testing method of performance for Vacuum insulation cryogenic equipment - Part 1: Basic requirements 真空绝热深冷设备性能试验方法 第1部分：基本要求 |
China National Standards Vacuum |
English PDF |
| GB/T 13930-2010 |
Methods for the measurement of volume flow of gas of water-ring Vacuum pumps and compressors 水环真空泵和水环压缩机 气量测定方法 |
China National Standards Vacuum |
English PDF |
| GB/T 13929-2010 |
Methods of testing for water-ring Vacuum pumps and compressors 水环真空泵和水环压缩机 试验方法 |
China National Standards Vacuum |
English PDF |
| GB/T 24711-2009 |
Continuous thermoforming Vacuum and vacuum - gas flushing packaging machine 连续热成型真空（充气）包装机 |
China National Standards Vacuum |
English PDF |
| GB/T 24140-2009 |
Rubber hose and tubing for air and Vacuum systems for internal-combustion engines - Specification 内燃机空气和真空系统用橡胶软管和纯胶管 规范 |
China National Standards Vacuum |
English PDF |
| GB/T 5019.7-2009 |
Insulating materials based on mica - Part 7: Glass-backed and film-backed mica paper with an epoxy resin binder for Vacuum pressure impregnation(VPI) 以云母为基的绝缘材料 第7部分：真空压力浸渍（VPI）用玻璃布及薄膜补强环氧树脂粘合云母带 |
China National Standards Vacuum |
English PDF |
| GB/T 23711.4-2009 |
Vacuum test method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 耐真空试验方法 |
China National Standards Vacuum |
English PDF |
| GB 4706.93-2008 |
Household and similar electrical appliances - Safety - Particular requirements for wet and dry Vacuum cleaners for industrial and commercial use 家用和类似用途电器的安全 工业和商业用湿式和干式真空吸尘器的特殊要求 |
China National Standards Vacuum |
English PDF |
| GB/T 4214.2-2008 |
Household and similar electrical appliances - Test code for determination of airborne acoustical noise - Particular requirements for Vacuum cleaners 家用和类似用途电器噪声测试方法 真空吸尘器的特殊要求 |
China National Standards Vacuum |
English PDF |
| GB/T 22939.3-2008 |
Package of household and similar electrical appliances - Particular requirements for Vacuum cleaners and water suction cleaning appliances 家用和类似用途电器包装 真空吸尘器和吸水式清洁器具的特殊要求 |
China National Standards Vacuum |
English PDF |
| GB/T 22561-2008 |
Vacuum heat treatment 真空热处理 |
China National Standards Vacuum |
English PDF |
| GB 22360-2008 |
Vacuum pumps - Safety requirements 真空泵 安全要求 |
China National Standards Vacuum |
English PDF |
| GB 4706.88-2008 |
Safety of household and similar electrical appliances - Particular requirements for wet and dry Vacuum cleaners,including power brush,for industrial and commercial use 家用和类似用途电器的安全 工业和商用带动力刷的湿或干吸尘器的特殊要求 |
China National Standards Vacuum |
English PDF |
| GB/T 7774-2007 |
Vacuum technology -Turbomolecular pumps - Measurement of performance characteristics 真空技术 涡轮分子泵性能参数的测量 |
China National Standards Vacuum |
English PDF |
| GB/T 6070-2007 |
Vacuum technology - Flange dimensions 真空技术 法兰尺寸 |
China National Standards Vacuum |
English PDF |
| GB/T 3164-2007 |
Vacuum technology - Graphical symbols 真空技术 图形符号 |
China National Standards Vacuum |
English PDF |
| GB/T 3163-2007 |
Vacuum technology - Terminology 真空技术 术语 |
China National Standards Vacuum |
English PDF |
| GB/T 21272-2007 |
Vapour Vacuum pumps - Measurement of performance characteristics Measurement of back-streaming rate of pump fluid and the heating time 蒸汽流真空泵性能测量方法 泵液返流率和加热时间的测量 |
China National Standards Vacuum |
English PDF |
| GB/T 21271-2007 |
Vacuum technology - Noise measurement for vacuum pumps 真空技术 真空泵噪声测量 |
China National Standards Vacuum |
English PDF |
| GB/T 4060-2007 |
Polycrystalline silicon - examination method - Vacuum zone - melting on boron 硅多晶真空区熔基硼检验方法 |
China National Standards Vacuum |
English PDF |
| GB/T 19955.2-2005 |
Vapour Vacuum pumps-Measurement of performance characteristics Part2:Measurement of critical backing pressure 蒸汽流真空泵性能测量方法 第2部分：临界前级压力的测量 |
China National Standards Vacuum |
English PDF |
| GB/T 19955.1-2005 |
Vapour Vacuum pumps-Measurement of performance characteristics Part1:Measurement of volume rate of flow(pumping speed) 蒸汽流真空泵性能测量方法 第1部分：体积流率（抽速）的测量 |
China National Standards Vacuum |
English PDF |
| GB 4706.79-2005 |
Safety of household and similar electrical appliances Part 2:Particular requirements for hand-held mains-operated garden blowers,Vacuums and blower vacuums 家用和类似用途电器的安全 第二部分:手持式电动园艺用吹屑机、吸屑机及吹吸两用机的特殊要求 |
China National Standards Vacuum |
English PDF |
| GB/T 9177-2004 |
Vacuum packaging machine and vacuum-gas flushing packaging machine 真空、真空充气包装机通用技术条件 |
China National Standards Vacuum |
English PDF |
| GB/T 4983-2003 |
Vacuum technology--Quick release couplings--Dimensions--Part 2:Screwed type 真空技术 快卸连接器 尺寸 第2部分:拧紧型 |
China National Standards Vacuum |
English PDF |
| GB/T 4982-2003 |
Vacuum technology--Quick release couplings--Dimensions--Part 1:Clamped type 真空技术 快卸连接器 尺寸 第1部分:夹紧型 |
China National Standards Vacuum |
English PDF |
| GB/T 6071-2003 |
Ultra-high Vacuum flange 超高真空法兰 |
China National Standards Vacuum |
English PDF |
| GB/T 18193-2000 |
Vacuum technology--Mass-spectrometer-type leak detector calibration 真空技术 质谱检漏仪校准 |
China National Standards Vacuum |
English PDF |
| GB/T 17475-1998 |
Standard test method for distillation of heavy hydrocarbon mixtures(Vacuum potstill method) 重烃类混合物蒸馏试验方法(真空釜式蒸馏法) |
China National Standards Vacuum |
English PDF |
| GB/T 3788-1995 |
General specification for Vacuum capacitors 真空电容器通用技术条件 |
China National Standards Vacuum |
English PDF |
| GB/T 15717-1995 |
Test method for Vacuum-deposited metal thickness--Electric resistance method 真空金属镀层厚度测试方法 电阻法 |
China National Standards Vacuum |
English PDF |
| GB/T 13944-1992 |
Blank detail specification for Vacuum fluorescent display tubes 荧光显示管空白详细规范(可供认证用) |
China National Standards Vacuum |
English PDF |
| GB/T 13943-1992 |
General specification for Vacuum fluorescent display tubes 荧光显示管总规范(可供认证用) |
China National Standards Vacuum |
English PDF |
| GB/T 13747.21-1992 |
Zirconium and zirconium alloys--Determination of hydrogen content--Vacuum heating chromatographic method 锆及锆合金化学分析方法 真空加热气相色谱法测定氢量 |
China National Standards Vacuum |
English PDF |
| GB/T 4193-1984 |
Method for measuring the density of the fine wire and ribbon of tungsten and molybdenum used in electric light sources and Vacuumtubes 电真空器件及电光源用细钨丝、钼丝和薄带密度的测试方法 |
China National Standards Vacuum |
English PDF |
| GB/T 4192-1984 |
Method for the determination of the resistivity of tungsten and molybdenum used in electric light sources and Vacuumtubes 电真空器件及电光源用钨、钼材料电阻率的测试方法 |
China National Standards Vacuum |
English PDF |
| Find out:139Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
