Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 13174-2021 |
Determination of detergency and cycle Washing performance of detergents for clothing "Revision No. 1" {译} 衣料用洗涤剂去污力及循环洗涤性能的测定《第1号修改单》 |
China National Standards W |
English PDF |
GB/T 43626-2023 |
Safety regulations for semi-integrated LED lamps With power supply voltage not greater than AC rms 50V or ripple-free DC 120V for general lighting {译} 普通照明用电源电压不大于交流有效值50V或无纹波直流120V的半集成式LED灯 安全规范 |
China National Standards W |
English PDF |
GB/T 43624-2023 |
Wetland terminology {译} 湿地术语 |
China National Standards W |
English PDF |
GB/T 43618-2023 |
Non-destructive testing process toWer gamma ray scanning method {译} 无损检测 工艺塔伽马射线扫描方法 |
China National Standards W |
English PDF |
GB/T 43614-2023 |
Additive Manufacturing Metal PoWder Directional Energy Deposition Equipment Laser Cladding Head Test Method {译} 增材制造 金属粉末定向能量沉积设备激光熔覆头测试方法 |
China National Standards W |
English PDF |
GB/T 43610-2023 |
Microbeam analysis Analytical electron microscopy Transmission electron microscopy method for determination of apparent groWth direction of linear crystals {译} 微束分析 分析电子显微术 线状晶体表观生长方向的透射电子显微术测定方法 |
China National Standards W |
English PDF |
GB/T 43605-2023 |
Atmospheric corrosion diagram draWing method {译} 大气腐蚀图绘制方法 |
China National Standards W |
English PDF |
GB/T 43598-2023 |
Nanotechnology Determination of oxygen content and carbon-to-oxygen ratio of graphene poWder X-ray photoelectron spectroscopy {译} 纳米技术 石墨烯粉体氧含量和碳氧比的测定 X射线光电子能谱法 |
China National Standards W |
English PDF |
GB/T 43595-2023 |
Guidelines for start-up testing and commissioning of hydraulic turbines, Water pump turbines and energy storage pumps {译} 水轮机、水泵水轮机和蓄能泵启动试验及试运行导则 |
China National Standards W |
English PDF |
GB/T 43589-2023 |
Gold alloy jeWelry, multi-element content determination, laser ablation-inductively coupled plasma mass spectrometry {译} 金合金饰品 多元素含量测定 激光剥蚀-电感耦合等离子体质谱法 |
China National Standards W |
English PDF |
GB/T 43582-2023 |
Blockchain and Distributed Accounting Technology Application Programming Interface MiddleWare Technology Guide {译} 区块链和分布式记账技术 应用程序接口 中间件技术指南 |
China National Standards W |
English PDF |
GB/T 43577.1-2023 |
Information Security Technology Electronic Discovery Part 1: OvervieW and Concepts {译} 信息安全技术 电子发现 第1部分:概述和概念 |
China National Standards W |
English PDF |
GB/T 43573-2023 |
Method for determination of heat dissipation performance of clothing - sWeating body warming dummy method {译} 服装散热性能的测定方法 出汗暖体假人法 |
China National Standards W |
English PDF |
GB/T 43569-2023 |
JeWelry and Precious Metals Sampling of Precious Metals and Their Alloys {译} 首饰和贵金属 贵金属及其合金的取样 |
China National Standards W |
English PDF |
GB/T 43563-2023 |
Water quality for aquaculture in saline-alkali land {译} 盐碱地水产养殖用水水质 |
China National Standards W |
English PDF |
GB/T 43560-2023 |
NeW Urbanization Innovative City Evaluation Guide {译} 新型城镇化 创新型城市评价指南 |
China National Standards W |
English PDF |
GB/T 43557-2023 |
Information Security Technology NetWork Security Information Submission Guide {译} 信息安全技术 网络安全信息报送指南 |
China National Standards W |
English PDF |
GB/T 43556.2-2023 |
Fiber Optic Cable Line Maintenance Technology Part 2: Underground Splice Box Water Leakage Monitoring Using Optical Monitoring System {译} 光纤光缆线路维护技术 第2部分:使用光学监测系统的地埋接头盒浸水监测 |
China National Standards W |
English PDF |
GB/T 43549-2023 |
FootWear - Test methods for insoles - Static compression deformation {译} 鞋类 鞋垫试验方法 静态压缩变形 |
China National Standards W |
English PDF |
GB/T 43543-2023 |
MouthWash {译} 漱口水 |
China National Standards W |
English PDF |
GB/T 43541-2023 |
Intelligent manufacturing NetWork collaborative manufacturing Business architecture and information model {译} 智能制造 网络协同制造 业务架构与信息模型 |
China National Standards W |
English PDF |
GB/T 43539-2023 |
Standards for electronic document archiving and electronic archive management of government Websites and webpages {译} 政府网站网页电子文件归档和电子档案管理规范 |
China National Standards W |
English PDF |
GB/T 43532-2023 |
Nuclear poWer plant instrumentation and control system network security prevention and control {译} 核电厂仪表和控制系统网络安全防范管控 |
China National Standards W |
English PDF |
GB/T 43531-2023 |
Optical performance testing method for multi-vieW stitching panoramic imaging equipment {译} 多目拼接全景成像设备光学性能测试方法 |
China National Standards W |
English PDF |
GB/T 43524.1-2023 |
Subsea equipment Part 1: PoWer connectors, penetrations and jumper assemblies for rated voltages 3 kV (Umax=3.6 kV) to 30 kV (Umax=36 kV) {译} 水下设备 第1部分:额定电压3 kV(Umax=3.6 kV)至30 kV(Umax=36 kV)电源连接器、贯穿装置和跨接线组件 |
China National Standards W |
English PDF |
GB/T 43522-2023 |
Manufacturing Supervision Guidelines for Lithium-Ion Batteries for Electric PoWer Storage {译} 电力储能用锂离子电池监造导则 |
China National Standards W |
English PDF |
GB/T 43512-2023 |
Reliability evaluation method of all-vanadium redox floW battery {译} 全钒液流电池可靠性评价方法 |
China National Standards W |
English PDF |
GB/T 43504-2023 |
Flight performance flight test requirements for large and medium-sized civilian fixed-Wing UAVs {译} 民用大中型固定翼无人机飞行性能飞行试验要求 |
China National Standards W |
English PDF |
GB/T 43501-2023 |
Ships and Offshore Technology - Vibration measurement, evaluation and reporting guidelines for habitability of ships With specific characteristics {译} 船舶和海上技术 特定特征船舶适居性的振动测量、评价和报告准则 |
China National Standards W |
English PDF |
GB/T 43499-2023 |
Motor vehicle detection system softWare testing method {译} 机动车检测系统软件测试方法 |
China National Standards W |
English PDF |
GB/T 43496-2023 |
Detection methods for thermal cycle and condensation of building curtain Walls {译} 建筑幕墙热循环和结露检测方法 |
China National Standards W |
English PDF |
GB/T 43493.3-2023 |
Semiconductor devices - Non-destructive testing and identification criteria for defects in silicon carbide homoepitaxial Wafers for power devices - Part 3: Photoluminescence detection method of defects {译} 半导体器件 功率器件用碳化硅同质外延片缺陷的无损检测识别判据 第3部分:缺陷的光致发光检测方法 |
China National Standards W |
English PDF |
GB/T 43493.2-2023 |
Semiconductor devices - Non-destructive testing and identification criteria for defects in silicon carbide homoepitaxial Wafers for power devices - Part 2: Optical detection methods for defects {译} 半导体器件 功率器件用碳化硅同质外延片缺陷的无损检测识别判据 第2部分:缺陷的光学检测方法 |
China National Standards W |
English PDF |
GB/T 43493.1-2023 |
Semiconductor devices - Non-destructive testing and identification criteria for defects in silicon carbide homoepitaxial Wafers for power devices - Part 1: Defect classification {译} 半导体器件 功率器件用碳化硅同质外延片缺陷的无损检测识别判据 第1部分:缺陷分类 |
China National Standards W |
English PDF |
GB/T 43491-2023 |
Steel Wire rope - Creep test method {译} 钢丝绳 蠕变试验方法 |
China National Standards W |
English PDF |
GB/T 43484-2023 |
Additive Manufacturing High Temperature Alloy PoWders for Laser Powder Bed Melting {译} 增材制造 激光粉末床熔融用高温合金粉末 |
China National Standards W |
English PDF |
GB/T 43483-2023 |
Heavy machinery Welding parts design specifications {译} 重型机械 焊接件设计规范 |
China National Standards W |
English PDF |
GB/T 43480-2023 |
Non-destructive testing Phased array ultrasonic cylindrical imaging guided Wave testing {译} 无损检测 相控阵超声柱面成像导波检测 |
China National Standards W |
English PDF |
GB/T 43477-2023 |
Evaluation Guidelines for Water-Saving Industrial Parks {译} 节水型工业园区评价导则 |
China National Standards W |
English PDF |
GB/T 43451-2023 |
Distribution NetWork Operation Evaluation Guidelines {译} 配电网运营评价导则 |
China National Standards W |
English PDF |
GB/T 43428-2023 |
Digital analysis and netWork analysis in market, public opinion and social surveys Terminology and service requirements {译} 市场、民意和社会调查中数字分析与网络分析 术语和服务要求 |
China National Standards W |
English PDF |
GB/T 43407.4-2023 |
Road vehicles Ergonomic requirements for driving areas of loW-floor passenger buses running on dedicated lines Part 4: Driving area environment {译} 道路车辆 低地板专线行驶客车驾驶区人体工程学要求 第4部分:驾驶区环境 |
China National Standards W |
English PDF |
GB/T 43407.2-2023 |
Road vehicles - Ergonomic requirements for driving areas of loW-floor passenger buses running on dedicated lines - Part 2: Visibility {译} 道路车辆 低地板专线行驶客车驾驶区人体工程学要求 第2部分:视野 |
China National Standards W |
English PDF |
GB/T 43330.4-2023 |
Ship's ballast Water treatment systems Part 4: Discharge sampling devices and procedures {译} 船舶压载水处理系统 第4部分:排放取样装置和规程 |
China National Standards W |
English PDF |
GB/T 42737-2023 |
Commissioning procedures for electrochemical energy storage poWer stations {译} 电化学储能电站调试规程 |
China National Standards W |
English PDF |
GB/T 42151.81-2023 |
PoWer automation communication networks and systems Part 8-1: Specific communication service mapping (SCSM) mapping to MMS (ISO 9506-1 and ISO 9506-2) and ISO/IEC 8802-3 {译} 电力自动化通信网络和系统 第8-1部分:特定通信服务映射(SCSM) 映射到MMS(ISO 9506-1和ISO 9506-2)和ISO/IEC 8802-3 |
China National Standards W |
English PDF |
GB/T 36558-2023 |
General technical conditions for electrochemical energy storage systems in poWer systems {译} 电力系统电化学储能系统通用技术条件 |
China National Standards W |
English PDF |
GB/T 36280-2023 |
Lead-carbon batteries for poWer storage {译} 电力储能用铅炭电池 |
China National Standards W |
English PDF |
GB/T 36276-2023 |
Lithium-ion batteries for poWer energy storage {译} 电力储能用锂离子电池 |
China National Standards W |
English PDF |
GB/T 35065.2-2023 |
Wet natural gas flow measurement Part 2: Flowmeter test and evaluation methods {译} 湿天然气流量测量 第2部分:流量计测试和评价方法 |
China National Standards W |
English PDF |
GB/T 34877.2-2023 |
Industrial fans - Determination of fan sound poWer levels under standard laboratory conditions - Part 2: Reverberation chamber method {译} 工业风机 标准实验室条件下风机声功率级的测定 第2部分:混响室法 |
China National Standards W |
English PDF |
GB/T 34877.1-2023 |
Industrial fans - Determination of fan sound poWer levels under standard laboratory conditions - Part 1: General requirements {译} 工业风机 标准实验室条件下风机声功率级的测定 第1部分:通用要求 |
China National Standards W |
English PDF |
GB/T 33393-2023 |
FootWear - Test methods for complete shoes - Determination of thermal and moisture resistance {译} 鞋类 整鞋试验方法 热阻和湿阻的测定 |
China National Standards W |
English PDF |
GB/T 32440.1-2023 |
FootWear - Chemical test methods - Determination of phthalates - Part 1: Solvent extraction method {译} 鞋类 化学试验方法 邻苯二甲酸酯的测定 第1部分:溶剂萃取法 |
China National Standards W |
English PDF |
GB/T 32165-2023 |
Water-saving enterprises fermentation industry {译} 节水型企业 发酵行业 |
China National Standards W |
English PDF |
GB/T 31728-2023 |
Movable light fixture With charging device {译} 带充电装置的可移式灯具 |
China National Standards W |
English PDF |
GB/T 31032-2023 |
Steel pipeline Welding and acceptance {译} 钢质管道焊接及验收 |
China National Standards W |
English PDF |
GB/T 30420.3-2023 |
SeWing Machinery Terminology Part 3: Spreading and Cutting Equipment Terminology {译} 缝制机械术语 第3部分: 铺布裁剪设备术语 |
China National Standards W |
English PDF |
GB/T 29246-2023 |
Information Security Technology Information Security Management System OvervieW and Glossary {译} 信息安全技术 信息安全管理体系 概述和词汇 |
China National Standards W |
English PDF |
GB/T 29043-2023 |
Methods for testing the thermal insulation performance of building curtain Walls {译} 建筑幕墙保温性能检测方法 |
China National Standards W |
English PDF |
GB/T 29041-2023 |
Road Wear test method for automobile tires {译} 汽车轮胎道路磨耗试验方法 |
China National Standards W |
English PDF |
GB/T 28886-2023 |
Plastic doors and Windows for construction {译} 建筑用塑料门窗 |
China National Standards W |
English PDF |
GB/T 28819-2023 |
Aluminum alloy housing for inflatable high-voltage sWitchgear {译} 充气高压开关设备用铝合金外壳 |
China National Standards W |
English PDF |
GB/T 28545-2023 |
Guidelines for modernization and performance improvement of turbines, storage pumps and Water pump turbines {译} 水轮机、蓄能泵和水泵水轮机更新改造和性能改善导则 |
China National Standards W |
English PDF |
GB/T 28511.2-2023 |
Planar optical Waveguide integrated optical circuit devices Part 2: Dense wavelength division multiplexing (DWDM) filters based on arrayed waveguide grating (AWG) technology {译} 平面光波导集成光路器件 第2部分:基于阵列波导光栅(AWG)技术的密集波分复用(DWDM)滤波器 |
China National Standards W |
English PDF |
GB/T 26991-2023 |
Fuel cell electric vehicle poWer performance test method {译} 燃料电池电动汽车动力性能试验方法 |
China National Standards W |
English PDF |
GB/T 26927-2023 |
Water-saving enterprises paper industry {译} 节水型企业 造纸行业 |
China National Standards W |
English PDF |
GB/T 26705-2023 |
LightWeight printing paper {译} 轻型印刷纸 |
China National Standards W |
English PDF |
GB/T 26688-2023 |
Battery-poWered emergency evacuation lighting automatic test system {译} 电池供电的应急疏散照明自动试验系统 |
China National Standards W |
English PDF |
GB/T 25320.11-2023 |
PoWer system management and its information exchange Data and communication security Part 11: Security of XML files {译} 电力系统管理及其信息交换 数据和通信安全 第11部分:XML文件的安全 |
China National Standards W |
English PDF |
GB/T 25320.6-2023 |
PoWer system management and its information exchange Data and communication security Part 6: Security of IEC 61850 {译} 电力系统管理及其信息交换 数据和通信安全 第6部分:IEC 61850的安全 |
China National Standards W |
English PDF |
GB/T 24933-2023 |
ATV Warning symbols {译} 全地形车警示符号 |
China National Standards W |
English PDF |
GB/T 23144-2023 |
Paper and paperboard Determination of bending stiffness General principles of the tWo-point, three-point and four-point methods {译} 纸和纸板 弯曲挺度的测定 两点法、三点法和四点法的通用原理 |
China National Standards W |
English PDF |
GB/T 23031.4-2023 |
Industrial Internet Platform Application Implementation Guide Part 4: NetWorked Collaboration {译} 工业互联网平台 应用实施指南 第4部分:网络化协同 |
China National Standards W |
English PDF |
GB/T 21008-2023 |
Safety requirements for underground mining aerial ropeWays {译} 地下矿用架空索道 安全要求 |
China National Standards W |
English PDF |
GB/T 19510.211-2023 |
Light source control devices Part 2-11: Special requirements for miscellaneous electronic circuits used in conjunction With luminaires {译} 光源控制装置 第2-11部分:与灯具联用的杂类电子线路的特殊要求 |
China National Standards W |
English PDF |
GB/T 19510.207-2023 |
Light source control devices Part 2-7: Special requirements for electronic control devices poWered by safety service power supplies (ESSS) for emergency lighting (self-contained) {译} 光源控制装置 第2-7部分:应急照明(自容式)用安全服务电源(ESSS)供电电子控制装置的特殊要求 |
China National Standards W |
English PDF |
GB/T 19510.202-2023 |
Light source control devices Part 2-2: Special requirements for DC/AC electronic step-doWn converters for tungsten lamps {译} 光源控制装置 第2-2部分:钨丝灯用直流/交流电子降压转换器的特殊要求 |
China National Standards W |
English PDF |
GB/T 19510.201-2023 |
Light source control devices Part 2-1: Special requirements for starting devices (other than gloW starters) {译} 光源控制装置 第2-1部分: 启动装置(辉光启动器除外)的特殊要求 |
China National Standards W |
English PDF |
GB/T 19502-2023 |
Surface chemical analysis—General principles for gloW discharge emission spectroscopy methods {译} 表面化学分析 辉光放电发射光谱方法通则 |
China National Standards W |
English PDF |
GB/T 17626.30-2023 |
Electromagnetic compatibility - Testing and measurement technology - Part 30: PoWer quality measurement methods {译} 电磁兼容 试验和测量技术 第30部分:电能质量测量方法 |
China National Standards W |
English PDF |
GB/T 17359-2023 |
Microbeam analysis Quantitative analysis of elements With atomic number not less than 11 by energy spectrometry {译} 微束分析 原子序数不小于11的元素能谱法定量分析 |
China National Standards W |
English PDF |
GB/T 15342-2023 |
talcum poWder {译} 滑石粉 |
China National Standards W |
English PDF |
GB/T 15035-2023 |
Wood drying terminology {译} 木材干燥术语 |
China National Standards W |
English PDF |
GB/T 13631-2023 |
Design criteria for auxiliary control rooms in nuclear poWer plants {译} 核电厂辅助控制室设计准则 |
China National Standards W |
English PDF |
GB/T 13629-2023 |
Applicable guidelines for programmable digital devices in nuclear poWer plant safety systems {译} 核电厂安全系统中可编程数字设备的适用准则 |
China National Standards W |
English PDF |
GB/T 10335.6-2023 |
Coated paper and paperboard Part 6: Water-based coated paper {译} 涂布纸和纸板 第6部分:水性涂布纸 |
China National Standards W |
English PDF |
GB/T 10067.6-2023 |
Basic technical conditions for electrothermal and electromagnetic treatment devices Part 6: Industrial microWave heating devices {译} 电热和电磁处理装置基本技术条件 第6部分:工业微波加热装置 |
China National Standards W |
English PDF |
GB/T 9364.8-2023 |
Miniature fuses Part 8: Fusing resistors With special overcurrent protection {译} 小型熔断器 第8部分:带有特殊过电流保护的熔断电阻器 |
China National Standards W |
English PDF |
GB/Z 43521-2023 |
General guidelines for the design and analysis of ocean temperature difference energy conversion poWer plants {译} 海洋温差能转换电站设计和分析的一般指南 |
China National Standards W |
English PDF |
GB/Z 43464-2023 |
PoWer quality requirements for ocean energy conversion devices {译} 海洋能转换装置电能质量要求 |
China National Standards W |
English PDF |
GB/Z 41275.23-2023 |
Avionics Process Management Aerospace and Defense Electronic Systems Containing Lead-Free Solder Part 23: ReWork/Repair Guidelines for Lead-Free and Mixed Electronics {译} 航空电子过程管理 含无铅焊料航空航天及国防电子系统 第23部分:无铅及混装电子产品返工/修复指南 |
China National Standards W |
English PDF |
GB/Z 43533-2023 |
Integration of internal arc fault suppression systems in complete sets of poWer switches and control equipment (PSC complete sets) according to GB/T 7251.2-2023 {译} 依据GB/T 7251.2—2023的成套电力开关和控制设备(PSC成套设备)中内部电弧故障抑制系统的集成 |
China National Standards W |
English PDF |
GB/Z 17624.7-2023 |
Electromagnetic compatibility OvervieW Part 7: Power factor of single-phase systems under non-sinusoidal conditions {译} 电磁兼容 综述 第7部分:非正弦条件下单相系统的功率因数 |
China National Standards W |
English PDF |
GB/Z 20840.100-2023 |
Transformers Part 100: Guidelines for the application of current transformers for poWer system protection {译} 互感器 第100部分:电力系统保护用电流互感器应用导则 |
China National Standards W |
English PDF |
GB/Z 43468.1-2023 |
Assistive technology systems and assistive devices for persons With disabilities - Wheelchair fastening and occupant restraint systems - Part 1: General requirements and test methods {译} 残障人辅助技术系统和辅助器具 轮椅车系固和乘坐者约束系统 第1部分:一般要求和试验方法 |
China National Standards W |
English PDF |
GB/Z 25320.1003-2023 |
PoWer system management and its information exchange Data and communication security Part 100-3: Conformance test cases for IEC 62351-3 and secure communication extensions including the TCP/IP protocol suite {译} 电力系统管理及其信息交换 数据和通信安全 第100-3部分:IEC 62351-3的一致性测试用例和包括TCP/IP协议集的安全通信扩展 |
China National Standards W |
English PDF |
GB/Z 25320.1001-2023 |
PoWer system management and its information exchange Data and communication security Part 100-1: Conformance test cases for IEC 62351-5 and IEC TS 60870-5-7 {译} 电力系统管理及其信息交换 数据和通信安全 第100-1部分:IEC 62351-5和IEC TS 60870-5-7的一致性测试用例 |
China National Standards W |
English PDF |
GB/T 7260.1-2023 |
Uninterruptible PoWer Supply Systems (UPS) Part 1: Safety Requirements {译} 不间断电源系统(UPS) 第1部分:安全要求 |
China National Standards W |
English PDF |
GB/T 7256.4-2023 |
Civil airport navigation aids Part 4: Wind vane {译} 民用机场助航灯具 第4部分:风向标 |
China National Standards W |
English PDF |
GB/T 7256.2-2023 |
Civil airport navigation aids Part 2: Sequential flashing lights and runWay threshold identification lights {译} 民用机场助航灯具 第2部分:顺序闪光灯和跑道入口识别灯 |
China National Standards W |
English PDF |
GB/T 7000.223-2023 |
Luminaires Part 2-23: Special requirements Extra-loW voltage (ELV) lighting systems for use with extra-low voltage (ELV) light sources {译} 灯具 第2-23部分:特殊要求 特低电压(ELV)光源用特低电压照明系统 |
China National Standards W |
English PDF |
GB/T 7000.218-2023 |
Luminaires Part 2-18: Special requirements Luminaires for sWimming pools and similar places {译} 灯具 第2-18部分:特殊要求 游泳池和类似场所用灯具 |
China National Standards W |
English PDF |
GB/T 6803-2023 |
Drop Weight test method for non-plastic transition temperature of ferritic steels {译} 铁素体钢的无塑性转变温度落锤试验方法 |
China National Standards W |
English PDF |
GB/T 5766-2023 |
RockWell hardness test method for friction materials {译} 摩擦材料洛氏硬度试验方法 |
China National Standards W |
English PDF |
GB/T 5019.13-2023 |
Mica-based insulation materials Part 13: High thermal conductivity glass cloth reinforced loW-adhesive mica tape {译} 以云母为基的绝缘材料 第13部分:高导热性玻璃布补强少胶云母带 |
China National Standards W |
English PDF |
GB/T 4822-2023 |
SaW timber inspection {译} 锯材检验 |
China National Standards W |
English PDF |
GB/T 3499-2023 |
RaW magnesium ingot {译} 原生镁锭 |
China National Standards W |
English PDF |
GB/T 2659.3-2023 |
Name codes of countries and regions around the World and their administrative divisions Part 3: Previously used country and region codes {译} 世界各国和地区及其行政区划名称代码 第3部分:原先使用的国家和地区代码 |
China National Standards W |
English PDF |
GB/T 1149.12-2023 |
Internal combustion engines - Piston rings - Part 12: Wedge steel rings {译} 内燃机 活塞环 第12部分:楔形钢环 |
China National Standards W |
English PDF |
GB/T 1149.11-2023 |
Internal combustion engines - Piston rings - Part 11: Wedge cast iron rings {译} 内燃机 活塞环 第11部分:楔形铸铁环 |
China National Standards W |
English PDF |
GB 43630-2023 |
ToWer and rack server energy efficiency limits and energy efficiency levels {译} 塔式和机架式服务器能效限定值及能效等级 |
China National Standards W |
English PDF |
GB 43472-2023 |
Safety requirements for lamps and poWer rail systems for lamps {译} 灯具及灯具用电源导轨系统 安全要求 |
China National Standards W |
English PDF |
GB 24542-2023 |
Fall protection Self-locking device With rigid guide rails {译} 坠落防护 带刚性导轨的自锁器 |
China National Standards W |
English PDF |
GB 15607-2023 |
Safety regulations for coating operations Safety of poWder electrostatic spraying process {译} 涂装作业安全规程 粉末静电喷涂工艺安全 |
China National Standards W |
English PDF |
GB 21252-2023 |
Energy consumption limit per unit product for building sanitary ceramics and Wear-resistant alumina balls {译} 建筑卫生陶瓷和耐磨氧化铝球单位产品能源消耗限额 |
China National Standards W |
English PDF |
GB 18585-2023 |
Interior Decoration Materials Limits of Hazardous Substances in Wallpaper {译} 室内装饰装修材料 壁纸中有害物质限量 |
China National Standards W |
English PDF |
GB/Z 40104.103-2023 |
Solar thermal poWer station Part 1-3: General meteorological data set data format {译} 太阳能光热发电站 第1-3部分:通用 气象数据集数据格式 |
China National Standards W |
English PDF |
GB/Z 43364-2023 |
Rotary poWer pump model pump hydraulic performance acceptance test {译} 回转动力泵 模型泵水力性能验收试验 |
China National Standards W |
English PDF |
GB/Z 43339-2023 |
Automation systems and integration Specialized application cases for interoperability capabilities betWeen manufacturing software units {译} 自动化系统与集成 制造软件单元间互操作能力专规应用案例 |
China National Standards W |
English PDF |
GB/T 43422-2023 |
Space station Waste management requirements {译} 空间站废弃物管理要求 |
China National Standards W |
English PDF |
GB/T 43233-2023 |
Additive Manufacturing System Performance and Reliability Acceptance Test of Laser PoWder Bed Melting Equipment for Metal Materials in Aerospace {译} 增材制造 系统性能和可靠性 航空航天用金属材料激光粉末床熔融设备验收试验 |
China National Standards W |
English PDF |
GB/T 18916.14-2023 |
Water quotas Part 14: Woolen textile products {译} 取水定额 第14部分:毛纺织产品 |
China National Standards W |
English PDF |
GB/T 11356.2-2023 |
Belt drives - Inspection of normal and narroW V-pulley grooves - Part 2: Effective width system {译} 带传动 普通和窄V带轮槽形检验 第2部分:有效宽度制 |
China National Standards W |
English PDF |
GB/T 43374-2023 |
Space data and information transmission system Spacecraft information system softWare architecture {译} 空间数据与信息传输系统 航天器信息系统软件体系结构 |
China National Standards W |
English PDF |
GB/T 43368-2023 |
General specification for breakaWay connectors for aerospace applications {译} 宇航用分离脱落连接器通用规范 |
China National Standards W |
English PDF |
GB/T 24692-2023 |
Surfactants - Detergents for household machine dishWashing - Performance comparison test guide {译} 表面活性剂 家庭机洗餐具用洗涤剂 性能比较试验导则 |
China National Standards W |
English PDF |
GB/T 43359-2023 |
Printing and dyeing Wastewater membrane method integrated equipment {译} 印染废水膜法集成装备 |
China National Standards W |
English PDF |
GB/T 43282.2-2023 |
Plastics. Determination of aerobic biodegradation of plastic materials exposed to seaWater. Part 2: Method for determination of oxygen demand in a closed respirometer. {译} 塑料 暴露于海水中塑料材料需氧生物分解的测定 第2部分:采用测定密闭呼吸计内需氧量的方法 |
China National Standards W |
English PDF |
GB/T 43282.1-2023 |
Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seaWater. Part 1: Using methods to analyze the release of carbon dioxide. {译} 塑料 暴露于海水中塑料材料需氧生物分解的测定 第1部分:采用分析释放二氧化碳的方法 |
China National Standards W |
English PDF |
GB/T 27866-2023 |
Technical specification for hardness control of steel pipes and equipment to prevent sulfide stress cracking of Welds {译} 钢制管道和设备防止焊缝硫化物应力开裂的硬度控制技术规范 |
China National Standards W |
English PDF |
GB/T 20656-2023 |
Oil and gas industry On-site inspection of neW casing, tubing and drill pipe {译} 石油天然气工业 新套管、油管和钻杆现场检验 |
China National Standards W |
English PDF |
GB/T 19830-2023 |
Oil and gas industry Steel pipes for oil and gas Well casing or tubing {译} 石油天然气工业 油气井套管或油管用钢管 |
China National Standards W |
English PDF |
GB/T 43340.2-2023 |
Financial NeWs and Information Part 2: Transmission Processing Interface Requirements {译} 财经新闻信息 第2部分:传输处理接口要求 |
China National Standards W |
English PDF |
GB/T 43340.1-2023 |
Financial NeWs and Information Part 1: Metadata {译} 财经新闻信息 第1部分:元数据 |
China National Standards W |
English PDF |
GB/T 43392-2023 |
Safety performance testing and evaluation method of subWay disaster prevention system {译} 地铁防灾系统安全性能测试与评估方法 |
China National Standards W |
English PDF |
GB/T 5686.9-2023 |
Ferromanganese, manganese-silicon alloy, ferromanganese nitride and metallic manganese. Determination of manganese, silicon, phosphorus and iron content. Wavelength dispersive X-ray fluorescence spectrometry (cast glass plate method) {译} 锰铁、锰硅合金、氮化锰铁和金属锰 锰、硅、磷和铁含量的测定 波长色散X射线荧光光谱法(熔铸玻璃片法) |
China National Standards W |
English PDF |
GB/T 43363-2023 |
Determination of form distribution of 12 elements including copper, zinc, cadmium, lead and chromium in Waste chemicals. Continuous extraction method {译} 废弃化学品中铜、锌、镉、铅、铬等12种元素形态分布的测定 连续提取法 |
China National Standards W |
English PDF |
GB/T 43305-2023 |
Compatibility test procedures for Waste chemicals {译} 废弃化学品相容性试验规程 |
China National Standards W |
English PDF |
GB/T 32592-2023 |
Rail transit current receiving system Requirements and verification for dynamic interaction measurement betWeen pantograph and catenary {译} 轨道交通 受流系统 受电弓与接触网动态相互作用测量的要求和验证 |
China National Standards W |
English PDF |
GB/T 43291-2023 |
Cross-border e-commerce overseas Warehouse operation and management requirements {译} 跨境电子商务海外仓运营管理要求 |
China National Standards W |
English PDF |
GB/T 43445-2023 |
Information security technology Basic security requirements for pre-installed application softWare on mobile smart terminals {译} 信息安全技术 移动智能终端预置应用软件基本安全要求 |
China National Standards W |
English PDF |
GB/T 43435-2023 |
Information Security Technology Mobile Internet Application (App) SoftWare Development Kit (SDK) Security Requirements {译} 信息安全技术 移动互联网应用程序(App)软件开发工具包(SDK)安全要求 |
China National Standards W |
English PDF |
GB/T 43269-2023 |
Information Security Technology NetWork Security Emergency Capability Assessment Criteria {译} 信息安全技术 网络安全应急能力评估准则 |
China National Standards W |
English PDF |
GB/T 43318-2023 |
Gas turbine combined cycle poWer plant thermal performance test {译} 燃气轮机联合循环电站 热力性能试验 |
China National Standards W |
English PDF |
GB/T 43447-2023 |
JeWelry Gold Alloy Colors Definitions, Color Ranges and Nomenclature {译} 首饰 金合金颜色 定义、颜色范围和命名 |
China National Standards W |
English PDF |
GB/T 30000.31-2023 |
Specifications for Classification and Labeling of Chemicals Part 31: Warning signs for chemical workplaces {译} 化学品分类和标签规范 第31部分:化学品作业场所警示性标志 |
China National Standards W |
English PDF |
GB/T 43310-2023 |
Determination of chemical elements of glass fibers and raW materials by inductively coupled plasma optical emission spectrometry (ICP-OES) {译} 玻璃纤维及原料化学元素的测定 电感耦合等离子体发射光谱法(ICP-OES) |
China National Standards W |
English PDF |
GB/T 43309-2023 |
Determination of chemical elements of glass fiber and raW materials X-ray fluorescence spectrometry {译} 玻璃纤维及原料化学元素的测定 X射线荧光光谱法 |
China National Standards W |
English PDF |
GB/T 43360-2023 |
Zirconium and zirconium alloy poWder for additive manufacturing {译} 增材制造用锆及锆合金粉 |
China National Standards W |
English PDF |
GB/T 43302-2023 |
Titanium and titanium alloy Wire for additive manufacturing {译} 增材制造用钛及钛合金丝材 |
China National Standards W |
English PDF |
GB/T 6150.3-2023 |
Methods for chemical analysis of tungsten concentrates Part 3: Determination of phosphorus content Phosphomolybdenum yelloW spectrophotometry and inductively coupled plasma atomic emission spectrometry {译} 钨精矿化学分析方法 第3部分:磷含量的测定 磷钼黄分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards W |
English PDF |
GB/T 3195-2023 |
Aluminum and aluminum alloy draWn (rolled) round wire rods {译} 铝及铝合金拉(轧)制圆线材 |
China National Standards W |
English PDF |
GB/T 18329.2-2023 |
Sliding bearings Multi-layer metal sliding bearings Part 2: Destructive testing of bonding strength for alloys With thickness ≥ 2 mm {译} 滑动轴承 多层金属滑动轴承 第2部分:合金厚度≥2mm的结合强度破坏性试验 |
China National Standards W |
English PDF |
GB/T 18329.1-2023 |
Sliding bearings Multi-layer metal sliding bearings Part 1: Ultrasonic non-destructive testing of bond quality for alloys With thickness ≥0.5mm {译} 滑动轴承 多层金属滑动轴承 第1部分:合金厚度≥0.5mm的结合质量超声无损检验 |
China National Standards W |
English PDF |
GB/T 14910-2023 |
Sliding bearings Technical requirements for thick-Walled multi-layer bearing backings {译} 滑动轴承 厚壁多层轴承衬背技术要求 |
China National Standards W |
English PDF |
GB/T 23930-2023 |
Three Wheel vehicle steering gear {译} 三轮汽车 转向器 |
China National Standards W |
English PDF |
GB/T 23921-2023 |
Three Wheel vehicle half shaft {译} 三轮汽车 半轴 |
China National Standards W |
English PDF |
GB/T 43304-2023 |
Nitrogen oxide blue-green poWder for white light LED {译} 白光LED用氮氧化物蓝绿粉 |
China National Standards W |
English PDF |
GB/T 43285-2023 |
Green takeaWay management specifications {译} 绿色外卖管理规范 |
China National Standards W |
English PDF |
GB/T 43342-2023 |
Safety requirements for automatic controllers of household and similar electrical appliances With remote operation functions {译} 带有远程操作功能的家用和类似用途电器自动控制器的安全要求 |
China National Standards W |
English PDF |
GB/T 43315-2023 |
Detection of silicon Wafer flow pattern defects Corrosion method {译} 硅片流动图形缺陷的检测 腐蚀法 |
China National Standards W |
English PDF |
GB/T 43313-2023 |
Testing of surface quality and microtube density of polished silicon carbide Wafers by confocal differential interference method {译} 碳化硅抛光片表面质量和微管密度的测试 共焦点微分干涉法 |
China National Standards W |
English PDF |
GB/T 27612.3-2023 |
Agricultural irrigation equipment sprinkler heads Part 3: Water volume distribution characteristics and test methods {译} 农业灌溉设备 喷头 第3部分:水量分布特性和试验方法 |
China National Standards W |
English PDF |
GB/T 25423-2023 |
Square straW bale baling machine {译} 方草捆打捆机 |
China National Standards W |
English PDF |
GB/T 29419-2023 |
Performance of Wood plastic composite decking, guardrails and fencing systems {译} 塑木复合材料铺板、护栏和围栏体系性能 |
China National Standards W |
English PDF |
GB/T 29418-2023 |
Test method for performance of Wood-plastic composite extruded profiles {译} 塑木复合材料挤出型材性能测试方法 |
China National Standards W |
English PDF |
GB/T 43300-2023 |
Ceramic Flat Membrane Pure Water Flux Test Method {译} 陶瓷平板膜 纯水通量试验方法 |
China National Standards W |
English PDF |
GB/T 14048.1-2023 |
LoW-voltage switchgear and controlgear Part 1: General {译} 低压开关设备和控制设备 第1部分:总则 |
China National Standards W |
English PDF |
GB/T 43357-2023 |
General performance test methods for Wire ropes {译} 钢丝绳一般性能试验方法 |
China National Standards W |
English PDF |
GB/T 43312-2023 |
Wire rope for medical equipment {译} 医疗器械用钢丝绳 |
China National Standards W |
English PDF |
GB/T 21837-2023 |
Electromagnetic detection method of ferromagnetic steel Wire rope {译} 铁磁性钢丝绳电磁检测方法 |
China National Standards W |
English PDF |
GB/T 9485-2023 |
Radial floW turbocharger connection dimensions {译} 径流式涡轮增压器 联接尺寸 |
China National Standards W |
English PDF |
GB/T 32800.9-2023 |
Safety requirements for hand-held non-electric poWer tools Part 9: Grinder for molds {译} 手持式非电类动力工具 安全要求 第9部分:模具用砂轮机 |
China National Standards W |
English PDF |
GB/T 32800.8-2023 |
Hand-held non-electric poWer tools Safety requirements Part 8: Grinders and polishers {译} 手持式非电类动力工具 安全要求 第8部分:磨光机和抛光机 |
China National Standards W |
English PDF |
GB/T 32800.6-2023 |
Hand-held non-electric poWer tools Safety requirements Part 6: Assembly power tools for threaded fasteners {译} 手持式非电类动力工具 安全要求 第6部分:螺纹紧固件用装配动力工具 |
China National Standards W |
English PDF |
GB/T 32800.5-2023 |
Safety requirements for hand-held non-electric poWer tools Part 5: Rotary impact drilling tools {译} 手持式非电类动力工具 安全要求 第5部分:回转冲击式钻孔工具 |
China National Standards W |
English PDF |
GB/T 43336-2023 |
General technical conditions for steering Wheel control systems {译} 舵轮控制系统通用技术条件 |
China National Standards W |
English PDF |
GB/T 43416-2023 |
Orthopedic footWear Requirements and test methods {译} 矫形鞋 要求与测试方法 |
China National Standards W |
English PDF |
GB/Z 41082.2-2023 |
Wheelchairs Part 2: Typical values and recommended limit values of dimensions, mass and operating space measured according to GB/Z 18029.5 {译} 轮椅车 第2部分:按GB/Z 18029.5测得的尺寸、质量和操作空间的典型值和推荐限制值 |
China National Standards W |
English PDF |
GB/T 20405.1-2023 |
Urine absorbent for incontinence Polyacrylate super absorbent poWder Part 1: Determination of pH value {译} 失禁者用尿液吸收剂 聚丙烯酸酯高吸水性粉末 第1部分:pH值的测定方法 |
China National Standards W |
English PDF |
GB/T 16457.2-2023 |
Diamond circular saW blade substrates Part 2: For sintered saw blades {译} 金刚石圆锯片基体 第2部分:用于烧结锯片 |
China National Standards W |
English PDF |
GB/T 43406-2023 |
Liquid cargo handling equipment, crude oil export system, tandem mooring Winch {译} 液货装卸设备 原油外输系统 串靠系泊绞车 |
China National Standards W |
English PDF |
GB/T 43384-2023 |
Marine and Marine Technology Marine Shark Clamps and ToW Pins {译} 船舶与海洋技术 船用鲨鱼钳及拖销 |
China National Standards W |
English PDF |
GB/T 43381-2023 |
Offshore structures, crude oil export systems, hose Winches {译} 海上结构物 原油外输系统 软管绞车 |
China National Standards W |
English PDF |
GB/T 43330.1-2023 |
Ship ballast Water treatment systems Part 1: Requirements {译} 船舶压载水处理系统 第1部分:要求 |
China National Standards W |
English PDF |
GB/T 43279.3-2023 |
Molecular in vitro diagnostic tests. Specification of pre-test procedures for venous Whole blood. Part 3: Isolation of plasma circulating cell-free DNA. {译} 分子体外诊断检验 静脉全血检验前过程的规范 第3部分:分离血浆循环游离DNA |
China National Standards W |
English PDF |
GB/T 43279.2-2023 |
Molecular in vitro diagnostic tests. Specification of pre-test procedures on venous Whole blood. Part 2: Isolation of genomic DNA. {译} 分子体外诊断检验 静脉全血检验前过程的规范 第2部分:分离基因组DNA |
China National Standards W |
English PDF |
GB/T 43279.1-2023 |
Molecular in vitro diagnostic tests. Specification of pre-test procedures for venous Whole blood. Part 1: Isolation of cellular RNA. {译} 分子体外诊断检验 静脉全血检验前过程的规范 第1部分:分离细胞RNA |
China National Standards W |
English PDF |
GB/T 43273-2023 |
Determination method of freeze-thaW stability of pesticides {译} 农药冻融稳定性测定方法 |
China National Standards W |
English PDF |
GB/T 4543-2023 |
lifesaving fireWork signal {译} 救生烟火信号 |
China National Standards W |
English PDF |
GB/T 3477-2023 |
Marine Weathertight single leaf steel door {译} 船用风雨密单扇钢质门 |
China National Standards W |
English PDF |
GB/T 43407.3-2023 |
Road vehicles - Ergonomic requirements for driving areas of loW-floor passenger buses running on dedicated lines - Part 3: Information devices and controls {译} 道路车辆 低地板专线行驶客车驾驶区人体工程学要求 第3部分:信息装置和控制器 |
China National Standards W |
English PDF |
GB/T 43407.1-2023 |
Road vehicles Ergonomic requirements for driving areas of loW-floor passenger buses running on dedicated lines Part 1: General description and basic requirements {译} 道路车辆 低地板专线行驶客车驾驶区人体工程学要求 第1部分:总体描述和基本要求 |
China National Standards W |
English PDF |
GB/T 43403-2023 |
Road vehicles Trailers beloW 3.5t Quality inspection after fatigue test of welded traction brackets for connecting balls {译} 道路车辆 3.5t以下挂车 连接球用焊接牵引支架疲劳试验后的质量检查 |
China National Standards W |
English PDF |
GB/T 43400-2023 |
Road vehicles Trailers beloW 3.5t Calculation of mechanical strength of steel drawbars {译} 道路车辆 3.5t以下挂车 钢制牵引杆机械强度计算 |
China National Standards W |
English PDF |
GB/T 43258.3-2023 |
Road vehicles Diagnostic communications over Internet Protocol (DoIP) Part 3: Wired vehicle interface based on IEEE 802.3 {译} 道路车辆 基于因特网协议的诊断通信(DoIP) 第3部分:基于IEEE 802.3有线车辆接口 |
China National Standards W |
English PDF |
GB/T 43258.2-2023 |
Road vehicles Diagnostic communications over Internet Protocol (DoIP) Part 2: Transport protocols and netWork layer services {译} 道路车辆 基于因特网协议的诊断通信(DoIP) 第2部分:传输协议与网络层服务 |
China National Standards W |
English PDF |
GB/T 43255-2023 |
Test method for loW temperature cold starting performance of fuel cell electric vehicles {译} 燃料电池电动汽车低温冷起动性能试验方法 |
China National Standards W |
English PDF |
GB/T 43253.4-2023 |
Road vehicles Functional safety audit and assessment methods Part 4: HardWare level {译} 道路车辆 功能安全审核及评估方法 第4部分:硬件层面 |
China National Standards W |
English PDF |
Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |