Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43532-2023 |
Nuclear power plant instrumentation and control system network security prevention and control {译} 核电厂仪表和控制系统网络安全防范管控 |
China National Standards clear |
 English PDF |
| GB/T 43520-2023 |
Simplified Guide to Import clearance Procedures {译} 进口清关程序简化指南 |
China National Standards clear |
English PDF |
| GB/T 13631-2023 |
Design criteria for auxiliary control rooms in nuclear power plants {译} 核电厂辅助控制室设计准则 |
China National Standards clear |
English PDF |
| GB/T 13629-2023 |
Applicable guidelines for programmable digital devices in nuclear power plant safety systems {译} 核电厂安全系统中可编程数字设备的适用准则 |
China National Standards clear |
English PDF |
| GB/T 4960.7-2023 |
Nuclear Science and Technology Terminology Part 7: Nuclear Material Control and Nuclear Safeguards {译} 核科学技术术语 第7部分:核材料管制与核保障 |
China National Standards clear |
English PDF |
| GB/T 4960.2-2023 |
Terminology of Nuclear Science and Technology Part 2: Fission Reactor {译} 核科学技术术语 第2部分：裂变反应堆 |
China National Standards clear |
English PDF |
| GB/T 43314-2023 |
Silicone rubber, determination of phenyl and vinyl content, proton nuclear magnetic resonance spectroscopy {译} 硅橡胶 苯基和乙烯基含量的测定 核磁共振氢谱法 |
China National Standards clear |
English PDF |
| GB/T 43347-2023 |
Monitoring of environmental parameters of electrical, instrumentation and control equipment important for nuclear power plant safety {译} 核电厂安全重要电气、仪表与控制设备环境参数的监测 |
China National Standards clear |
English PDF |
| GB/T 43189-2023 |
Nuclear instrumentation - Nomenclature (identification) of scintillator and scintillation detectors and standard dimensions of scintillator {译} 核仪器仪表 闪烁体和闪烁探测器的命名（标识）以及闪烁体的标准尺寸 |
China National Standards clear |
English PDF |
| GB/T 43107-2023 |
Stainless steel seamless steel pipe for instrument pressure induction in nuclear power plants {译} 核电站仪表引压用不锈钢无缝钢管 |
China National Standards clear |
English PDF |
| GB/T 43062-2023 |
Nuclear energy - Determination of neutron fluence and number of atomic dislocations (dpa) in reactor pressure vessels and internal components {译} 核能 反应堆压力容器和堆内构件中子注量和原子离位次数（dpa）的确定 |
China National Standards clear |
English PDF |
| GB/T 12727-2023 |
Appraisal of electrical equipment important to safety in nuclear power plants {译} 核电厂安全重要电气设备鉴定 |
China National Standards clear |
English PDF |
| GB/T 42545-2023 |
General requirements for the whole life cycle of corrosion control of rubber lining engineering in nuclear power plants {译} 核电厂橡胶衬里工程腐蚀控制全生命周期通用要求 |
China National Standards clear |
English PDF |
| GB/T 41754-2023 |
Duplex stainless steel plate for nuclear power plant {译} 核电站用双相不锈钢钢板 |
China National Standards clear |
English PDF |
| GB/T 41591-2022 |
First Criticality Test of PWR Nuclear Power Plant Reactor {译} 压水堆核电厂反应堆首次临界试验 |
China National Standards clear |
English PDF |
| GB/T 41585-2022 |
Specifications for writing commissioning program of pressurized water reactor nuclear power plant {译} 压水堆核电厂调试大纲编写规范 |
China National Standards clear |
English PDF |
| GB/T 41586-2022 |
Basic input parameters and output results of nuclear power plant emergency assessment {译} 核电厂应急评价基础输入参数和输出结果 |
China National Standards clear |
English PDF |
| GB/T 41576-2022 |
Requirements for unit performance test after fuel loading in pressurized water reactor nuclear power plant {译} 压水堆核电厂装料后机组性能试验要求 |
China National Standards clear |
English PDF |
| GB/T 41580-2022 |
Exposure Control of Nuclear and Radiological Emergency Response Personnel {译} 核与辐射应急响应人员的照射控制 |
China National Standards clear |
English PDF |
| GB/T 41581-2022 |
Estimation of Emergency Evacuation Time of Nuclear Power Plant {译} 核电厂应急撤离时间估算 |
China National Standards clear |
English PDF |
| GB/T 41582-2022 |
Rapid Estimation Method of Accident Source Term in Nuclear Power Plant {译} 核电厂事故源项快速估算方法 |
China National Standards clear |
English PDF |
| GB/T 41584-2022 |
Requirements for thermal state performance test before fuel loading in pressurized water reactor nuclear power plant {译} 压水堆核电厂装料前热态性能试验要求 |
China National Standards clear |
English PDF |
| GB/T 41587-2022 |
Requirements for cold-state performance test before fuel loading in pressurized water reactor nuclear power plant {译} 压水堆核电厂装料前冷态性能试验要求 |
China National Standards clear |
English PDF |
| GB/T 41583-2022 |
Nuclear power plant core damage assessment method {译} 核电厂堆芯损伤评价方法 |
China National Standards clear |
English PDF |
| GB/T 41579-2022 |
Nuclear Facility Emergency Preparedness Classification {译} 核设施应急准备分类 |
China National Standards clear |
English PDF |
| GB/T 41485-2022 |
Nuclear instrument geophysical density logging tool {译} 核仪器仪表 地球物理密度测井仪 |
China National Standards clear |
English PDF |
| GB/T 25942-2022 |
Nuclear-grade silver-indium-cadmium alloy rods 核级银-铟-镉合金棒 |
China National Standards clear |
English PDF |
| GB/T 41157.5-2022 |
Fasteners for nuclear power plants—Part 5：Acceptance inspection 核电厂用紧固件 第5部分：验收检查 |
China National Standards clear |
English PDF |
| GB/T 41157.1-2022 |
Fasteners for nuclear power plants—Part 1：Bolts, screws and studs made of alloy steel 核电厂用紧固件 第1部分：合金钢螺栓、螺钉和螺柱 |
China National Standards clear |
English PDF |
| GB/T 41157.2-2022 |
Fasteners for nuclear power plants—Part 2：Nuts made of carbon steel and alloy steel 核电厂用紧固件 第2部分：碳钢和合金钢螺母 |
China National Standards clear |
English PDF |
| GB/T 41157.3-2022 |
Fasteners for nuclear power plants—Part 3：Bolts, screws and studs made of corrosion-resistant stainless steel 核电厂用紧固件 第3部分：不锈钢螺栓、螺钉和螺柱 |
China National Standards clear |
English PDF |
| GB/T 41157.4-2022 |
Fasteners for nuclear power plants—Part 4：Nuts made of corrosion-resistant stainless steel 核电厂用紧固件 第4部分：不锈钢螺母 |
China National Standards clear |
English PDF |
| GB/T 7164-2022 |
Characteristics and test methods of radiation detectors for nuclear reactors 用于核反应堆的辐射探测器特性及测试方法 |
China National Standards clear |
English PDF |
| GB/T 3871.5-2022 |
Agricultural tractors—Test procedures—Part 5: Turning and clearance diameters 农业拖拉机 试验规程 第5部分：转向圆和通过圆直径 |
China National Standards clear |
English PDF |
| GB/T 41241-2022 |
Nuclear power plant industrial control system network security management requirements {译} 核电厂工业控制系统网络安全管理要求 |
China National Standards clear |
English PDF |
| GB/T 9225-2022 |
Application Guide for Reliability Analysis of Nuclear Power Plant Systems and Other Nuclear Facilities {译} 核电厂系统与其他核设施可靠性分析应用指南 |
China National Standards clear |
English PDF |
| GB/T 42292-2022 |
Occupational Exposure Dose Evaluation of Pressurized Water Reactor Nuclear Power Plant {译} 压水堆核电厂职业照射剂量评价 |
China National Standards clear |
English PDF |
| GB/T 42290-2022 |
Code for analysis and control of airborne radioactive source items in pressurized water reactor nuclear power plants {译} 压水堆核电厂气载放射性源项分析和控制规范 |
China National Standards clear |
English PDF |
| GB/T 42141-2022 |
Design criteria for radiation protection of nuclear island buildings under accident conditions in pressurized water reactor nuclear power plants {译} 压水堆核电厂事故工况核岛厂房辐射防护设计准则 |
China National Standards clear |
English PDF |
| GB/T 42291-2022 |
Design criteria for radiation protection of doors and windows in the control area of pressurized water reactor nuclear power plants {译} 压水堆核电厂控制区门窗辐射防护设计准则 |
China National Standards clear |
English PDF |
| GB/T 42142-2022 |
Analysis criteria for radiation source term of auxiliary system and secondary circuit system of pressurized water reactor nuclear power plant {译} 压水堆核电厂辅助系统及二回路系统辐射源项分析准则 |
China National Standards clear |
English PDF |
| GB/T 42143-2022 |
Code for design and construction of steel containment for pressurized water reactor nuclear power plants {译} 压水堆核电厂钢制安全壳设计建造规范 |
China National Standards clear |
English PDF |
| GB/T 41822-2022 |
Hot helium leak detection method for high temperature pressure-bearing parts of nuclear fusion reactor {译} 核聚变堆高温承压部件的热氦检漏方法 |
China National Standards clear |
English PDF |
| GB/T 41718-2022 |
Guidelines for the Condition Monitoring and Management of Key Equipment in Nuclear Power Plants {译} 核电厂关键设备状态监测管理导则 |
China National Standards clear |
English PDF |
| GB/T 41823-2022 |
Specification for quality management of welding consumables for items important to safety in nuclear power plants {译} 核电厂安全重要物项用焊接材料质量管理规范 |
China National Standards clear |
English PDF |
| GB/T 41824-2022 |
Quality management specifications for metal materials used in items important to safety in nuclear power plants {译} 核电厂安全重要物项用金属材料质量管理规范 |
China National Standards clear |
English PDF |
| GB/T 41717-2022 |
Terminology of aging management and life management in nuclear power plants {译} 核电厂老化管理与寿命管理术语 |
China National Standards clear |
English PDF |
| GB/T 40408-2021 |
Nuclear grade isostatic graphite for high temperature gas-cooled reactor internals 高温气冷堆堆内构件用核级等静压石墨 |
China National Standards clear |
English PDF |
| GB/T 12788-2021 |
Criteria for class 1E power systems for nuclear power plants 核电厂安全级电力系统准则 |
China National Standards clear |
English PDF |
| GB/T 7163-2021 |
Requirements of reliability analysis for nuclear power plant safety systems 核电厂安全系统可靠性分析要求 |
China National Standards clear |
English PDF |
| GB/T 40291-2021 |
Nuclear instrumentation—High-purity germanium crystals for radiation detectors—Measurement methods of basic characteristics 核仪器仪表 辐射探测器用高纯度锗晶体 基本特性的测量方法 |
China National Standards clear |
English PDF |
| GB/T 40101-2021 |
Ultrasonic testing method for stainless steel bars,plates and forgings of PWR nuclear fuel assembly and associated assembly 压水堆核燃料组件和相关组件用不锈钢棒、板、锻件超声波检测方法 |
China National Standards clear |
English PDF |
| GB/T 13976-2021 |
Radioactive source term of pressurized water reactor nuclear power plant for operation states 压水堆核电厂运行状态下的放射性源项 |
China National Standards clear |
English PDF |
| GB/T 1927.20-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 20: Determination of cleavage strength 无疵小试样木材物理力学性质试验方法 第20部分：抗劈力测定 |
China National Standards clear |
English PDF |
| GB/T 1927.19-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 19: Determination of static hardness 无疵小试样木材物理力学性质试验方法 第19部分：硬度测定 |
China National Standards clear |
English PDF |
| GB/T 1927.18-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 18: Determination of resistance to impact indentation 无疵小试样木材物理力学性质试验方法 第18部分：抗冲击压痕测定 |
China National Standards clear |
English PDF |
| GB/T 1927.17-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact bending strength 无疵小试样木材物理力学性质试验方法 第17部分：冲击韧性测定 |
China National Standards clear |
English PDF |
| GB/T 1927.12-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in compression perpendicular to grain 无疵小试样木材物理力学性质试验方法 第12部分：横纹抗压强度测定 |
China National Standards clear |
English PDF |
| GB/T 1927.10-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in bending 无疵小试样木材物理力学性质试验方法 第10部分：抗弯弹性模量测定 |
China National Standards clear |
English PDF |
| GB/T 1927.9-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 9: Determination of bending strength 无疵小试样木材物理力学性质试验方法 第9部分：抗弯强度测定 |
China National Standards clear |
English PDF |
| GB/T 1927.8-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 8: Determination of swelling 无疵小试样木材物理力学性质试验方法 第8部分：湿胀性测定 |
China National Standards clear |
English PDF |
| GB/T 1927.7-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 7: Determination of water absorption 无疵小试样木材物理力学性质试验方法 第7部分：吸水性测定 |
China National Standards clear |
English PDF |
| GB/T 1927.6-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 6: Determination of shrinkage 无疵小试样木材物理力学性质试验方法 第6部分：干缩性测定 |
China National Standards clear |
English PDF |
| GB/T 1927.5-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 5: Determination of density 无疵小试样木材物理力学性质试验方法 第5部分：密度测定 |
China National Standards clear |
English PDF |
| GB/T 1927.4-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 4: Determination of moisture content 无疵小试样木材物理力学性质试验方法 第4部分：含水率测定 |
China National Standards clear |
English PDF |
| GB/T 1927.3-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 3: Determination of the growth rings width and latewood rate of wood 无疵小试样木材物理力学性质试验方法 第3部分：生长轮宽度和晚材率测定 |
China National Standards clear |
English PDF |
| GB/T 1927.2-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 2: Sampling methods and general requirements 无疵小试样木材物理力学性质试验方法 第2部分：取样方法和一般要求 |
China National Standards clear |
English PDF |
| GB/T 1927.1-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 1: Collection of sample tree 无疵小试样木材物理力学性质试验方法 第1部分：试材采集 |
China National Standards clear |
English PDF |
| GB/T 41140-2021 |
Analysis criterion for radiation source term of reactor core and spent fuel assembly in PWR nuclear power plant 压水堆核电厂堆芯及乏燃料组件辐射源项分析准则 |
China National Standards clear |
English PDF |
| GB/T 41142-2021 |
Hardware design requirements of computer-based instrumentation and control systems important to safety for nuclear power plants 核电厂安全重要数字仪表和控制系统硬件设计要求 |
China National Standards clear |
English PDF |
| GB/T 5204-2021 |
Periodic surveillance testing of the safety system of nuclear power plant 核电厂安全系统定期试验与监测 |
China National Standards clear |
English PDF |
| GB/T 13627-2021 |
Criteria for accident monitoring instrumentation for nuclear power plants 核电厂事故监测仪表准则 |
China National Standards clear |
English PDF |
| GB/T 13626-2021 |
Application of the single-failure criterion for nuclear power plant safety systems 单一故障准则应用于核电厂安全系统 |
China National Standards clear |
English PDF |
| GB/T 41143-2021 |
Glossary of terms of instrumentation and control for nuclear power plants 核电厂仪表和控制术语 |
China National Standards clear |
English PDF |
| GB/T 13286-2021 |
Criteria for independence of class 1E equipment and circuits in nuclear power plants 核电厂安全级电气设备和电路独立性准则 |
China National Standards clear |
English PDF |
| GB/T 41145-2021 |
Human factors verification and validation for nuclear power plants 核电厂人因验证和确认 |
China National Standards clear |
English PDF |
| GB/T 11807-2021 |
Characteristics,design and operational procedures for acoustic monitoring systems of loose parts detection important to safety in nuclear power plants 核电厂安全重要松脱部件声学监测系统的特性、设计和运行规程 |
China National Standards clear |
English PDF |
| GB/T 41090-2021 |
General design requirements of pressurized water reactor nuclear power plants with active safety systems 能动安全系统压水堆核电厂总设计要求 |
China National Standards clear |
English PDF |
| GB/T 7363-2021 |
Test method for polynuclear aromatics in petroleum wax 石油蜡中稠环芳烃试验法 |
China National Standards clear |
English PDF |
| GB/T 40967-2021 |
Polyethylene(PE)pipes and fittings for nuclear power plants 核电厂用聚乙烯（PE）管材及管件 |
China National Standards clear |
English PDF |
| GB/T 40882-2021 |
Forgings of main pipes for nuclear power plant of generation Ⅲ -- Technological specification 第三代核电站主管道锻件 工艺规范 |
China National Standards clear |
English PDF |
| GB/T 17569-2021 |
Classification for the items of pressurized water reactor nuclear power plants 压水堆核电厂物项分级 |
China National Standards clear |
English PDF |
| GB/T 40860-2021 |
Analysis requirements for design extension conditions of pressurized water reactor nuclear power plants 压水堆核电厂设计扩展工况分析要求 |
China National Standards clear |
English PDF |
| GB/T 40620-2021 |
Guidelines for fire hazard analyses in nuclear power plants 核动力厂火灾危害性分析指南 |
China National Standards clear |
English PDF |
| GB/T 22158-2021 |
Code for fire protection design of nuclear power plant 核电厂防火设计规范 |
China National Standards clear |
English PDF |
| GB/T 40817.2-2021 |
Specification for nuclear power reactor coolant pump motor—Part 2:Asynchronous motor for canned motor pump 核电主泵电机技术条件 第2部分：屏蔽泵异步电机 |
China National Standards clear |
English PDF |
| GB/T 40817.1-2021 |
Specification for nuclear power reactor coolant pump motor—Part 1:Asynchronous motor for shaft sealing pump 核电主泵电机技术条件 第1部分：轴封泵异步电机 |
China National Standards clear |
English PDF |
| GB/T 40444-2021 |
General requirements for instrumentation and control systems important to safety in nuclear power plants 核电厂安全重要仪表和控制系统总体要求 |
China National Standards clear |
English PDF |
| GB/T 38913-2020 |
Test methods for hydride orientation fraction of nuclear grade zirconium and zirconium alloy tubes 核级锆及锆合金管材氢化物取向因子检测方法 |
China National Standards clear |
English PDF |
| GB/T 38875-2020 |
Reduced activation martensitic steel plates with heat-resistance and corrosion-resistance for nuclear facilities 核电用耐高温抗腐蚀低活化马氏体结构钢板 |
China National Standards clear |
English PDF |
| GB/T 38657-2020 |
Specifications for low pressure feed water heater for conventional island in nuclear power station 核电厂常规岛低压加热器技术条件 |
China National Standards clear |
English PDF |
| GB/T 38653-2020 |
Specifications for high pressure feed water heater for conventional island in nuclear power station 核电厂常规岛高压加热器技术条件 |
China National Standards clear |
English PDF |
| GB/T 23514-2020 |
Methods for chemical analysis of nuclear-grade Ag-In-Cd alloys 核级银-铟-镉合金化学分析方法 |
China National Standards clear |
English PDF |
| GB/T 50522-2019 |
Code of construction project management for nuclear power plants 核电厂建设工程监理规范 |
China National Standards clear |
English PDF |
| GB/T 51390-2019 |
Technical standard for concrete structures of nuclear power plants 核电厂混凝土结构技术标准 |
China National Standards clear |
English PDF |
| GB 51383-2019 |
Technical standard for concrete structures of nuclear power plants 钢铁企业冷轧厂废液处理及利用设施工程技术标准 |
China National Standards clear |
English PDF |
| GB/T 16702-2019 |
Design code for mechanical components in nuclear island of pressurized water reactor nuclear power plants 压水堆核电厂核岛机械设备设计规范 |
China National Standards clear |
English PDF |
| GB/T 37867-2019 |
Assessment specification of work safety standardization for nuclear power plant in operation 运行核电厂安全生产标准化考核评级规范 |
China National Standards clear |
English PDF |
| GB/T 37623-2019 |
Corrosion of metals and alloys—Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors 金属和合金的腐蚀 核反应堆用锆合金水溶液腐蚀试验 |
China National Standards clear |
English PDF |
| GB/T 37579-2019 |
Aluminum alloy extruded tubes for non-nuclear grade nuclear power cooling systems 非核级核电冷却用铝合金挤压管材 |
China National Standards clear |
English PDF |
| GB/Z 37754-2019 |
Guidance on clearances and creepage distances in particular for distances equal to or less than 2mm—Test results of research on influencing parameters 关于确定不超过2mm距离的电气间隙和爬电距离的指南 对影响参数进行研究的试验结果 |
China National Standards clear |
English PDF |
| GB/Z 37627.1-2019 |
Aluminum alloy extruded tubes for non-nuclear grade nuclear power cooling systems 架空电力线路和高压设备的无线电干扰特性 第1部分：现象描述 |
China National Standards clear |
English PDF |
| GB/T 37549-2019 |
Technical code for relaying protection of generator-transformer unit in large capacity nuclear power plant 大型核电发电机变压器组继电保护技术规范 |
China National Standards clear |
English PDF |
| GB/T 51340-2018 |
Technical standard for steel plate concrete structure of nuclear power plant 核电站钢板混凝土结构技术标准 |
China National Standards clear |
English PDF |
| GB/T 51323-2018 |
Nuclear power plant building and building maintenance and reliability appraisal standards 核电厂建构筑物维护及可靠性鉴定标准 |
China National Standards clear |
English PDF |
| GB/T 37210-2018 |
Nuclear radiation-resistant inflatable and water-filled rubber sealing products 耐核辐射充气和充水橡胶密封制品 |
China National Standards clear |
English PDF |
| GB/T 37184-2018 |
Corrosion control engineering life cycle of nuclear power plants—General requirements 核电厂腐蚀控制工程全生命周期-通用要求 |
China National Standards clear |
English PDF |
| GB/T 36147.2-2018 |
Security management systems for the supply chain—Electronic port clearance(EPC)—Part 2:Core data elements 供应链安全管理系统 电子口岸通关（EPC） 第2部分：核心数据元 |
China National Standards clear |
English PDF |
| GB/T 36147.1-2018 |
Security management systems for the supply chain—Electronic port clearance(EPC)—Part 1: Message structures 供应链安全管理系统 电子口岸通关（EPC） 第1部分：消息结构 |
China National Standards clear |
English PDF |
| GB/T 13625-2018 |
Seismic qualification of safety class electrical equipment for nuclear power plants 核电厂安全级电气设备抗震鉴定 |
China National Standards clear |
English PDF |
| GB/T 17982-2018 |
Models and parameters for calculating radiation doses to the public in the emergency of a nuclear accident 核事故应急情况下公众受照剂量估算的模式和参数 |
China National Standards clear |
English PDF |
| GB/T 36163-2018 |
Alloy steel plate for nuclear power plants 核电站用合金钢钢板 |
China National Standards clear |
English PDF |
| GB/T 36027-2018 |
Austenitic stainless steel bars for nuclear power plants 核电站用奥氏体不锈钢棒 |
China National Standards clear |
English PDF |
| GB/T 36044-2018 |
Qualification procedure of electrical equipment important to safety for nuclear power plant 核电厂安全重要电气设备鉴定规程 |
China National Standards clear |
English PDF |
| GB/T 36041-2018 |
Monitoring criteria for variable important to safety in nuclear power plants for pressurized water reactors 压水堆核电厂安全重要变量监测准则 |
China National Standards clear |
English PDF |
| GB/T 15146.12-2017 |
Nuclear criticality safety for fissile materials outside reactors—Part 12: Burnup credit for low water reactor( LWR) fuel 反应堆外易裂变材料的核临界安全 第12部分：轻水堆燃料燃耗信用制 |
China National Standards clear |
English PDF |
| GB/T 34117-2017 |
Specifications for moisture separator reheaters in conventional island of nuclear power plant 核电厂常规岛设备汽水分离再热器规范 |
China National Standards clear |
English PDF |
| GB/T 12727-2017 |
Qualification of safety class electrical equipment for nuclear power plants 核电厂安全级电气设备鉴定 |
China National Standards clear |
English PDF |
| GB/T 34915-2017 |
Austenitic stainless steel plate，sheet and strip for nuclear power plants 核电站用奥氏体不锈钢钢板和钢带 |
China National Standards clear |
English PDF |
| GB/T 35683-2017 |
Specifications for steam turbines in conventional island of nuclear power plant (PWR) 核电厂常规岛(压水堆)汽轮机规范 |
China National Standards clear |
English PDF |
| GB/T 13538-2017 |
Electrical penetration assemblies in containment structures for nuclear power plants 核电厂安全壳电气贯穿件 |
China National Standards clear |
English PDF |
| GB/T 35239-2017 |
Test method of evaluating the clearance capacity of formaldehyde scavenger for wood-based panels and finishing products 人造板及其制品用甲醛清除剂清除能力的测试方法 |
China National Standards clear |
English PDF |
| GB/T 1094.3-2017 |
Power transformers—Part 3:Insulation levels,dielectric tests and external clearances in air 电力变压器 第3部分:绝缘水平、绝缘试验和外绝缘空气间隙 |
China National Standards clear |
English PDF |
| GB/T 35730-2017 |
General design requirements of pressurized water reactor nuclear power plants with passive safety systems 非能动安全系统压水堆核电厂总设计要求 |
China National Standards clear |
English PDF |
| GB/T 33269-2016 |
Textiles—Polyester mixtures quantitative analysis—Nuclear magentic resonance spectroscopy method 纺织品 聚酯纤维混合物定量分析 核磁共振法 |
China National Standards clear |
English PDF |
| GB 1886.127-2016 |
National Food Safety Standard - Food Additives - hawthorn nuclear smoked flavoring material I, II 食品安全国家标准 食品添加剂 山楂核烟熏香味料I号、II号 |
China National Standards clear |
English PDF |
| GB/T 2900.97-2016 |
Electrotechnical terminology—Nuclear instrumentation: physical phenomena, basic concepts, instruments, systems, equipment and detectors 电工术语 核仪器：物理现象、基本概念、仪器、系统、设备和探测器 |
China National Standards clear |
English PDF |
| GB/T 20343-2016 |
Agricultural tractors and machinery—Connection of implements via three point linkage—clearance zone around implement 农业拖拉机和机械 三点悬挂机具的连接装置 机具周围的间隙范围 |
China National Standards clear |
English PDF |
| GB/T 1592.2-2016 |
Agricultural tractors—Rear-mounted power take-off types 1,2,3 and 4—Part 2: Narrow-track tractors, dimensions for master shield and clearance zone 农业拖拉机 后置动力输出轴 1、2、3和4型 第2部分：窄轮距拖拉机防护罩尺寸和空隙范围 |
China National Standards clear |
English PDF |
| GB/T 1592.1-2016 |
Agricultural tractors—Rear-mounted power take-off types 1, 2, 3 and 4—Part 1: General specifications，safety requirements，dimensions for master shield and clearance zone 农业拖拉机 后置动力输出轴 1、2、3和4型 第1部分：通用要求、安全要求、防护罩尺寸和空隙范围 |
China National Standards clear |
English PDF |
| GB/T 32350.1-2015 |
Railway applications—Insulation coordination—Part 1: Basic requirements—clearances and creepage distances for all electrical and electronic equipment 轨道交通 绝缘配合 第1部分：基本要求 电工电子设备的电气间隙和爬电距离 |
China National Standards clear |
English PDF |
| GB/T 32323-2015 |
Rolling bearings—Measuring methods for axial internal clearance of four-point-contact ball bearings 滚动轴承 四点接触球轴承轴向游隙的测量方法 |
China National Standards clear |
English PDF |
| GB/T 20013.3-2015 |
Nuclear medicine instrumentation—Routine tests—Part 3: Positron emission tomographs 核医学仪器 例行试验 第3部分：正电子发射断层成像装置 |
China National Standards clear |
English PDF |
| GB/T 7166-2015 |
Characteristics and test methods for in-core and primary coolant circuit temperature sensors in nuclear power plants 核电厂反应堆堆芯和主冷却剂回路内温度计的特性和试验方法 |
China National Standards clear |
English PDF |
| GB/T 13630-2015 |
Design of control room of nuclear power plants 核电厂控制室设计 |
China National Standards clear |
English PDF |
| GB/T 19661.2-2015 |
Safety requirements for nuclear instrumentations and systems—Part 2: Constructional requirements and classification of radiometric gauges 核仪器及系统安全要求 第2部分：放射性测量计的结构要求和分级 |
China National Standards clear |
English PDF |
| GB/T 17939-2015 |
Nuclear grade high efficiency particulate air filters 核级高效空气过滤器 |
China National Standards clear |
English PDF |
| GB/T 13631-2015 |
Design criteria for supplementary control point of nuclear power plants 核电厂辅助控制点设计准则 |
China National Standards clear |
English PDF |
| GB/T 31977-2015 |
Seamless copper alloy tubes for nuclear power heat-exchanger 核电冷凝器用铜合金无缝管 |
China National Standards clear |
English PDF |
| GB/T 30984.1-2015 |
Solar glass—Part 1: Ultra-clear patterned glass 太阳能用玻璃 第1部分：超白压花玻璃 |
China National Standards clear |
English PDF |
| GB/T 31941-2015 |
Non-nuclear safety class welded carbon steel and alloy steel pipes for nuclear power plant 核电站用非核安全级碳钢及合金钢焊接钢管 |
China National Standards clear |
English PDF |
| GB/T 31545-2015 |
Portland cement for Nuclear power engineering 核电工程用硅酸盐水泥 |
China National Standards clear |
English PDF |
| GB/T 31404-2015 |
Technical specification for anticorrosion operation of seawater circulation system in nuclear power plant 核电站海水循环系统防腐蚀作业技术规范 |
China National Standards clear |
English PDF |
| GB/T 15022.6-2014 |
Resin based reactive compounds used for electrical insulation―Part 6：Epoxy casting resinous compounds use for class 1E distribution transformer in nuclear power generating stations 电气绝缘用树脂基活性复合物 第6部分：核电站1E级配电变压器绝缘用环氧浇注树脂 |
China National Standards clear |
English PDF |
| GB/T 50294-2014 |
Design code for general plan and transportation of nuclear power plants 核电厂总平面及运输设计规范 |
China National Standards clear |
English PDF |
| GB 51041-2014 |
Code for geotechnical investigation of nuclear power plants 核电厂岩土工程勘察规范 |
China National Standards clear |
English PDF |
| GB 30814-2014 |
Steel plates of carbon steel and low alloy steel for nuclear power plants 核电站用碳素钢和低合金钢钢板 |
China National Standards clear |
English PDF |
| GB 30813-2014 |
Welded austenitic stainless steel tubes and pipes for nuclear power plant 核电站用奥氏体不锈钢焊接钢管 |
China National Standards clear |
English PDF |
| GB 24512.3-2014 |
Seamless steel tubes and pipes for nuclear power plant ― Part 3：Seamless stainless steel tubes and pipes 核电站用无缝钢管 第3部分：不锈钢无缝钢管 |
China National Standards clear |
English PDF |
| GB/T 50958-2013 |
Code for design of conventional island for nuclear power plant 核电厂常规岛设计规范 |
China National Standards clear |
English PDF |
| GB/T 30073-2013 |
Seamless austenitic stainless steel tubes for heat exchangers in nuclear power plant 核电站热交换器用奥氏体不锈钢无缝钢管 |
China National Standards clear |
English PDF |
| GB/T 12726.4-2013 |
Nuclear power plants―Instrumentation important to safety―Radiation monitoring for accident and post-accident conditions―Part 4: Equipment for continuous in-line or on-line monitoring of radioactivity in process streams 核电厂安全重要仪表 事故及事故后辐射监测 第4部分：工艺流管内或管旁放射性连续监测设备 |
China National Standards clear |
English PDF |
| GB/T 12726.3-2013 |
Nuclear power plants―Instrunmentation important to safety―Radiation monitoring for accident and post-accident conditions―Part 3: Equipment for continous high range area gamma monitoring 核电厂安全重要仪表 事故及事故后辐射监测 第3部分：高量程区域γ连续监测设备 |
China National Standards clear |
English PDF |
| GB/T 12726.2-2013 |
Nuclear power plants―Instrumentation important to safety―Radiation monitoring for accident and post-accident conditions—Part 2: Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air 核电厂安全重要仪表 事故及事故后辐射监测 第2部分：气态排出流及通风中放射性离线连续监测设备 |
China National Standards clear |
English PDF |
| GB/T 12726.1-2013 |
Nuclear power plants―Instrumentation important to safety―Radiation monitoring for accident and post-accident conditions―Part 1: General requirements 核电厂安全重要仪表 事故及事故后辐射监测 第1部分：一般要求 |
China National Standards clear |
English PDF |
| GB/T 30055-2013 |
Requirement on customs clearance services of international freight forwarders 国际货运代理报关服务质量要求 |
China National Standards clear |
English PDF |
| GB/T 4604.2-2013 |
Rolling bearings - Internal clearance - Part 2: Axial internal clearance for four-point-contact ball bearings 滚动轴承 游隙 第2部分：四点接触球轴承的轴向游隙 |
China National Standards clear |
English PDF |
| GB/T 50674-2013 |
Code of meteorology for nuclear power plant 核电厂工程气象技术规范 |
China National Standards clear |
English PDF |
| GB/T 4960.9-2013 |
Glossary of nuclear science and technology terms - Part 9：Magnetic confinement fusion 核科学技术术语 第9部分：磁约束核聚变 |
China National Standards clear |
English PDF |
| GB/T 17569-2013 |
Classification for the items of pressurized water reactor nuclear power plants 压水堆核电厂物项分级 |
China National Standards clear |
English PDF |
| GB/T 29363-2012 |
Water chiller with the vapor compression cycle for nuclear power plant 核电厂用蒸气压缩循环冷水机组 |
China National Standards clear |
English PDF |
| GB/T 29308-2012 |
Management requirement of ageing of instrumentation and control systems important to safety for nuclear power plants 核电厂安全重要仪表和控制系统老化管理要求 |
China National Standards clear |
English PDF |
| GB/T 4604.1-2012 |
Rolling bearings - Internal clearance - Part 1: Radial internal clearance for radial bearings 滚动轴承 游隙 第1部分：向心轴承的径向游隙 |
China National Standards clear |
English PDF |
| GB/T 28551-2012 |
Technical guideline of centrifugal pump set commissioning for nuclear power plant 核电厂离心泵组调试技术导则 |
China National Standards clear |
English PDF |
| GB/T 28550-2012 |
Piping verification requirement during nuclear power plant commissioning 核电厂调试阶段管道验证要求 |
China National Standards clear |
English PDF |
| GB/T 28549-2012 |
Verification requirement of supports in nuclear island during nuclear power plant commissioning 核电厂调试阶段核岛管道与主设备支吊装置验证要求 |
China National Standards clear |
English PDF |
| GB/T 28548-2012 |
Guideline of nuclear power plant primary circuit hydraulic tests 核电厂主回路水压试验技术导则 |
China National Standards clear |
English PDF |
| GB/T 28536-2012 |
Guidelines for formulating the ageing management programme of mechanical equipment in nuclear power plants 核电厂机械设备老化管理大纲编制导则 |
China National Standards clear |
English PDF |
| GB 16361-2012 |
Specification for patient radiological protection and quality control in nuclear medicine 临床核医学的患者防护与质量控制规范 |
China National Standards clear |
English PDF |
| GB 50745-2012 |
Code for design of fire protection for conventiontional island in nuclear power plants 核电厂常规岛设计防火规范 |
China National Standards clear |
English PDF |
| GB/T 15473-2011 |
Qualification of class 1E static battery chargers and inverters for nuclear power plants 核电厂安全级静止式充电装置及逆变装置的质量鉴定 |
China National Standards clear |
English PDF |
| GB/T 5203-2011 |
Safety logic assemblies of nuclear reactor characteristics and test methods 核反应堆安全逻辑装置特性和检验方法 |
China National Standards clear |
English PDF |
| GB 6249-2011 |
Regulations for environmental radiation protection of nuclear power plant 核动力厂环境辐射防护规定 |
China National Standards clear |
English PDF |
| GB/T 50663-2011 |
Technical code for engineering hydrology for nuclear power plant 核电厂工程水文技术规范 |
China National Standards clear |
English PDF |
| GB 14587-2011 |
Technical requirements for discharge of radioactive liquid effluents from nuclear power plant 核电厂放射性液态流出物排放技术要求 |
China National Standards clear |
English PDF |
| GB/T 26411-2010 |
Determination of 16 polynuclear aromatic hydrocarbons in seawater by GC-MS 海水中16种多环芳烃的测定 气相色谱-质谱法 |
China National Standards clear |
English PDF |
| GB/T 25942-2010 |
Nuclear grade silver-indium-cadmium rods 核级银-铟-镉合金棒 |
China National Standards clear |
English PDF |
| GB/T 25769-2010 |
Rolling bearings - Measuring methods for radial internal clearance 滚动轴承 径向游隙的测量方法 |
China National Standards clear |
English PDF |
| GB/T 25766-2010 |
Rolling bearings - Insert bearings - Radial internal clearance 滚动轴承 外球面球轴承 径向游隙 |
China National Standards clear |
English PDF |
| GB/T 25838-2010 |
Qualification of safety class resistance temperature detectors for nuclear power plants 核电厂安全级电阻温度探测器的质量鉴定 |
China National Standards clear |
English PDF |
| GB/T 25837-2010 |
Qualification of electrical penetration assemblies in containment structures for nuclear power plants 核电厂安全壳电气贯穿件的质量鉴定 |
China National Standards clear |
English PDF |
| GB/T 25739-2010 |
Technical guideline of valves commissioning for nuclear power plant 核电厂阀门调试技术导则 |
China National Standards clear |
English PDF |
| GB/T 25738-2010 |
Technical guideline of motor commissioning for nuclear power plant 核电厂电动机调试技术导则 |
China National Standards clear |
English PDF |
| GB/T 4960.7-2010 |
Glossary of terms for nuclear science and technology Part 7: Nuclear materials control and safeguards 核科学技术术语 第7部分：核材料管制与核保障 |
China National Standards clear |
English PDF |
| GB/T 4960.3-2010 |
Glossary of terms - nuclear science and technology - Part 3: Nuclear fuel and nuclear fuel cycle 核科学技术术语 第3部分：核燃料与核燃料循环 |
China National Standards clear |
English PDF |
| GB/T 4960.1-2010 |
Glossary of terms - nuclear science and technology - part 1: Nuclear physics and nuclear chemistry 核科学技术术语 第1部分：核物理与核化学 |
China National Standards clear |
English PDF |
| GB/T 25448-2010 |
Helium leak testing of PHWR nuclear fuel bundles 重水堆核电厂燃料棒束氦质谱泄漏检测 |
China National Standards clear |
English PDF |
| GB/T 25314-2010 |
Requirements of corrosion management program for mechanical equipment in nuclear power plants 核电厂机械设备腐蚀管理大纲内容要求 |
China National Standards clear |
English PDF |
| GB/T 15474-2010 |
Classification on instrumentation and control function of instrumentation and control systems important to safety for nuclear power plants 核电厂安全重要仪表和控制功能分类 |
China National Standards clear |
English PDF |
| GB/T 13627-2010 |
Criteria for accident monitoring instrumentation for nuclear power generating stations 核电厂事故监测仪表准则 |
China National Standards clear |
English PDF |
| GB 50633-2010 |
Technical code for engineering surveying of nuclear power station 核电厂工程测量技术规范 |
China National Standards clear |
English PDF |
| GB/T 16743-2010 |
Blanking clearance 冲裁间隙 |
China National Standards clear |
English PDF |
| GB/T 20013.4-2010 |
Nuclear medicine instrumentation - Rutine tests - Part4:Radionuclide calibrator 核医学仪器 例行试验 第4部分：放射性核素校准仪 |
China National Standards clear |
English PDF |
| GB/T 50572-2010 |
Code for seismic investigation and evaluation of nuclear power plants 核电厂工程地震调查与评价规范 |
China National Standards clear |
English PDF |
| GB/T 50522-2009 |
Code of construction project management for unclear power plants 核电厂建设工程监理规范 |
China National Standards clear |
English PDF |
| GB 50521-2009 |
Code for design of uranium mining and metallurgy engineering in nuclear industry 核工业铀矿冶工程设计规范 |
China National Standards clear |
English PDF |
| GB 50520-2009 |
Code for safety design of uranium mills tailings pond in nuclear industry 核工业铀水冶厂尾矿库、尾渣库安全设计规范 |
China National Standards clear |
English PDF |
| GB/T 17126.2-2009 |
Agricultural tractors and machinery - Power take-off drive shafts and power-input connection - Part 2：Specification for use of PTO drive shaft, and position and clearance of PTO drive line and PIC for various attachments 农业拖拉机和机械 动力输出万向节传动轴和动力输入连接装置 第2部分：动力输出万向节传动轴使用规范、各类联接装置用动力输出传动系和动力输入连接装置位置及间隙范围 |
China National Standards clear |
English PDF |
| GB 24512.2-2009 |
Seamless steel tubes and pipes for nuclear power plant - Part 2: Alloy steel seamless tubes and pipes 核电站用无缝钢管 第2部分：合金钢无缝钢管 |
China National Standards clear |
English PDF |
| GB 24512.1-2009 |
Seamless steel tubes and pipes for nuclear power plant - Part 1: Carbon steel seamless tubes and pipes 核电站用无缝钢管 第1部分：碳素钢无缝钢管 |
China National Standards clear |
English PDF |
| Find out:321Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
