Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 18944.2-2022 |
Flexible cellular polymeric materials—Sponge and expanded cellular rubber products—Specification—Part 2：mouldings and extrusions 柔性多孔聚合物材料 海绵和发泡橡胶制品 规范 第2部分：模制品与挤出制品 |
China National Standards mould |
 English PDF |
| GB/T 37199.1-2021 |
Plastics—Polybutene(PB) moulding and extrusion materials—Part 1：Designation system and basis for specifications 塑料 聚丁烯（PB）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 10801.1-2021 |
moulded polystyrene foam for thermal insulation（EPS） 绝热用模塑聚苯乙烯泡沫塑料(EPS) |
China National Standards mould |
English PDF |
| GB/T 1845.2-2021 |
Plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料 聚乙烯（PE）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 40169-2021 |
Compression-moulded plates of ultra-high-molecular-weight polyethylene(PE-UHMW)and high density polyethylene (PE-HD) 超高分子量聚乙烯（PE-UHMW）和高密度聚乙烯（PE-HD）模塑板材 |
China National Standards mould |
English PDF |
| GB/T 39933-2021 |
Rotational moulding—Test method for low temperature impact 滚塑成型 低温冲击试验 |
China National Standards mould |
English PDF |
| GB/T 39821-2021 |
Plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel 塑料 不能从规定漏斗流出的模塑材料表观密度的测定 |
China National Standards mould |
English PDF |
| GB/T 39818-2021 |
Plastics—Thermosetting moulding materials—Determination of shrinkage 塑料 热固性模塑材料 收缩率的测定 |
China National Standards mould |
English PDF |
| GB/T 41102-2021 |
General technical requirements for injection moulding system for PET preform in packaging field 包装PET瓶坯注塑成型模具系统通用技术要求 |
China National Standards mould |
English PDF |
| GB/T 41231-2021 |
General specification for moulded pallets with bamboo and wood particles 竹木刨花模压成型托盘通用技术条件 |
China National Standards mould |
English PDF |
| GB/T 40934-2021 |
Rotational moulding. Test method for powder flowability 滚塑成型 粉末流动性的试验方法 |
China National Standards mould |
English PDF |
| GB/T 22271.2-2021 |
Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 22271.1-2021 |
Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 1: Designation system and basis for specification 塑料 聚甲醛（POM）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 39164-2020 |
Tools for moulding—Thermal insulating sheets for injection moulds 成型模 注射模隔热板 |
China National Standards mould |
English PDF |
| GB/T 39170-2020 |
Tools for moulding—Centring sleeves 成型模 空心定位销 |
China National Standards mould |
English PDF |
| GB/T 38981-2020 |
Sintered-metal injection-moulded materials—Specifications 烧结金属注射成形材料 规范 |
China National Standards mould |
English PDF |
| GB/T 31301.8-2020 |
Footwear manufacturing machines—Safety requirememts—Part 8: moulding machines 制鞋机械 安全要求 第8部分：定型机 |
China National Standards mould |
English PDF |
| GB/T 25156-2020 |
General specifications and inspection methods of rubber and plastics injection moulding machines 橡胶塑料注射成型机通用技术要求及检测方法 |
China National Standards mould |
English PDF |
| GB/T 38533-2020 |
Injection moulding machines for rubber and plastics—Mould fixing and connection dimensions 橡胶塑料注射成型机 模具固定和联接尺寸 |
China National Standards mould |
English PDF |
| GB/T 38461-2020 |
Blow mould for PET bottle in food field 食品包装用PET瓶吹瓶成型模具 |
China JB-Machinery Industry Standards mould |
English PDF |
| GB/T 35840.4-2020 |
Steels for plastic mould—Part 4: Pre-hardenging steel plate 塑料模具钢 第4部分：预硬化钢板 |
China National Standards mould |
English PDF |
| GB/T 17037.5-2020 |
Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy 塑料 热塑性塑料材料注塑试样的制备 第5部分：各向异性评估用标准试样的制备 |
China National Standards mould |
English PDF |
| GB/T 17037.2-2020 |
Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars 塑料 热塑性塑料材料注塑试样的制备 第2部分：小拉伸试样 |
China National Standards mould |
English PDF |
| GB/T 1632.4-2020 |
Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials 塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第4部分：聚碳酸酯(PC)模塑和挤出材料 |
China National Standards mould |
English PDF |
| GB/T 39483.2-2020 |
Rubber and plastics injection moulding machine—Interface—Part 2:Data exchange interface 橡胶塑料注射成型机 接口 第2部分：数据交换接口 |
China National Standards mould |
English PDF |
| GB/T 39483.1-2020 |
Rubber and plastics injection moulding machine—Interface —Part 1: Mechanical and electrical interface 橡胶塑料注射成型机 接口 第1部分：机械和电气接口 |
China National Standards mould |
English PDF |
| GB/T 38273.2-2019 |
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第2部分：试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 38273.1-2019 |
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation system and basis for specification 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 38273.1-2019 |
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation system and basis for specification 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 17037.1-2019 |
Plastics-Injection moulding of test specimens of thermoplastic materials-Part 1:General principles,and moulding of multipurpose and bar test specimens 塑料 热塑性塑料材料注塑试样的制备 第1部分：一般原理及多用途试样和长条形试样的制备 |
China National Standards mould |
English PDF |
| GB/T 37508-2019 |
Determination of preservatives in moulding clay—High performance liquid chromatography method 造型黏土中防腐剂的测定 高效液相色谱法 |
China National Standards mould |
English PDF |
| GB/T 32065.15-2019 |
Environmental test methods for oceanographic instruments—Part 9:mould test 海洋仪器环境试验方法 第15部分:水压试验 |
China National Standards mould |
English PDF |
| GB/T 20390.1-2018 |
Textiles―Assessment of the ignitability of bedding items―Part 1: Ignition source: smouldering cigarette 纺织品-床上用品可点燃性的评定-第1部分:香烟为点火源 |
China National Standards mould |
English PDF |
| GB/T 34691.1-2018 |
Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 1:Designation system and basis for specifications 塑料-热塑性聚酯（TP）模塑和挤出材料-第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 37199.2-2018 |
Plastics—Polybutene(PB) moulding and extrusion materials—Part 2：Preparation of test specimens and determination of properties 塑料-聚丁烯（PB）模塑和挤出材料-第2部分：试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 37194.2-2018 |
Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料-聚苯硫醚(PPS)模塑和挤出材料-第2部分:试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 37194.1-2018 |
Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 1:Designation system and basis for specifications 塑料-聚苯硫醚(PPS)模塑和挤出材料-第1部分:命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 23641-2018 |
Fiber reinforced unsaturated polyester moulding compounds（SMC and BMC）for electrical purposes 电气用纤维增强不饱和聚酯模塑料（SMC/BMC） |
China National Standards mould |
English PDF |
| GB/T 35840.3-2018 |
Steels for plastic mould—Part 3：Corrosion resistant steels 塑料模具钢 第3部分:耐腐蚀钢 |
China National Standards mould |
English PDF |
| GB/T 35840.2-2018 |
Steels for plastic mould—Part 2：Pre-hardening steel bars 塑料模具钢 第2部分：预硬化钢棒 |
China National Standards mould |
English PDF |
| GB/T 36374.1-2018 |
Plastics-Sulfone polymer moulding and extrusion materials—Part1:Designation system and basis for specifications 塑料 砜聚合物模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 36374.2-2018 |
Plastics—Sulfone polymer moulding and extrusion materials—Part2:Preparation of test specimens and determination of properties 塑料 砜聚合物模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 36532-2018 |
Fibre-reinforced plastics—Thermosetting moulding compounds and prepregs—Determination of cure characteristics 纤维增强塑料 热固性模塑料和预浸料 固化特性测定 |
China National Standards mould |
English PDF |
| GB/T 35840.1-2018 |
Steels for plastic mould—Part 1：Non-alloy steels 塑料模具钢 第1部分：非合金钢 |
China National Standards mould |
English PDF |
| GB/T 34691.2-2017 |
Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 热塑性聚酯(TP)模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 34564.1-2017 |
Cold-word mould steel—Part 1: High toughness and wear-resistance steels 冷作模具钢 第1部分：高韧性高耐磨性钢 |
China National Standards mould |
English PDF |
| GB/T 34564.2-2017 |
Cold-work mould steel—Part 2: Flame quenchable steels 冷作模具钢 第2部分：火焰淬火钢 |
China National Standards mould |
English PDF |
| GB/T 34565.1-2017 |
Hot work mould steel—Part 1: Steels for casting mould 热作模具钢 第1部分：压铸模具用钢 |
China National Standards mould |
English PDF |
| GB/T 8845-2017 |
Dies and moulds—Terminology 模具 术语 |
China National Standards mould |
English PDF |
| GB/T 33811-2017 |
Alloy tool and mould steel sheets and plates 合金工模具钢板 |
China National Standards mould |
English PDF |
| GB/T 22350-2017 |
moulded plywood 成型胶合板 |
China National Standards mould |
English PDF |
| GB/T 35382-2017 |
Test methods for energy consumption of blow moulding machines for plastics 塑料中空成型机能耗检测方法 |
China National Standards mould |
English PDF |
| GB/T 35513.1-2017 |
Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 1: Designation system and basis for specifications 塑料 聚碳酸酯(PC)模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 35513.2-2017 |
Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 聚碳酸酯(PC)模塑和挤出材料 第2部分：试样制备和性能测试 |
China National Standards mould |
English PDF |
| GB/T 19701.2-2016 |
Implants for surgery—Ultra-high-molecular-weight polyethylene—Part 2: moulded forms 外科植入物 超高分子量聚乙烯 第2部分：模塑料 |
China National Standards mould |
English PDF |
| GB/T 1845.1-2016 |
Plastics—Polyethylene(PE) moulding and extrusion materials—Part 1: Designation system and basis for specifications 塑料 聚乙烯（PE）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 30924.1-2016 |
Plastics—Ethylene-vinyl acetate(EVAC) moulding and extrusion materials—Part 1: Designation system and basis for specification 塑料 乙烯-乙酸乙烯酯（EVAC）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 5474-2016 |
Plastics—Phenol formaldehyde mouldings—Determination of free ammonia and ammonium compounds—Colorimetric comparison method 塑料 酚醛模塑制品 游离氨和铵化合物的测定 比色法 |
China National Standards mould |
English PDF |
| GB/T 5473-2016 |
Plastics—Phenol formaldehyde mouldings—Detection of free ammonia 塑料 酚醛模塑制品 游离氨的测定 |
China National Standards mould |
English PDF |
| GB/T 7130-2016 |
Plastics—Phenol-formaldehyde mouldings—Determination of free phenols—lodometric method 塑料 酚醛模塑制品 游离酚的测定 碘量法 |
China National Standards mould |
English PDF |
| GB/T 22271.3-2016 |
Plastics—Polyoxymethylene(POM) moulding and extrusion materials—Part 3: Requirements for general materials 塑料 聚甲醛（POM）模塑和挤塑材料 第3部分：通用产品要求 |
China National Standards mould |
English PDF |
| GB/Z 22074-2016 |
Reliability test method for moulded-case circuit-breakers 塑料外壳式断路器可靠性试验方法 |
China National Standards mould |
English PDF |
| GB/T 32664-2016 |
Tools for moulding—Tool specification sheet for injection moulds 成型模 注射模订货技术规范 |
China National Standards mould |
English PDF |
| GB/T 32663-2016 |
Tools for moulding—Tool specification sheet for diecasting dies 成型模 压铸模订货技术规范 |
China National Standards mould |
English PDF |
| GB/T 16935.3-2016 |
Insulation coordination for equipment within low-voltage systems—Part 3: Use of coating, potting or moulding for protection against pollution 低压系统内设备的绝缘配合 第3部分：利用涂层、罐封和模压进行防污保护 |
China National Standards mould |
English PDF |
| GB/T 32363.2-2015 |
Plastics—Polyamide (PA) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 聚酰胺模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 32363.1-2015 |
Plastics—Polyamide (PA) moulding and extrusion materials—Part 1: Designation system and basis for specification 塑料 聚酰胺模塑和挤出材料 第1部分：命名系统和规范基础 |
China National Standards mould |
English PDF |
| GB/T 31301.4-2015 |
Footwear manufacturing machines—Safety requirements—Part 4: Foorwear moulding machines 制鞋机械 安全要求 第4部分：鞋类成型机 |
China National Standards mould |
English PDF |
| GB/T 30672-2014 |
moulded flat pallets from plants fiber 模压平托盘 植物纤维类 |
China National Standards mould |
English PDF |
| GB/T 1299-2014 |
Tool and mould steels 工模具钢 |
China National Standards mould |
English PDF |
| GB/T 31135-2014 |
Fiber reinforced unsaturated polyester powder moulding compounds（UP-PMC）for electrical purposes 电气用纤维增强不饱和聚酯粉状模塑料（UP-PMC） |
China National Standards mould |
English PDF |
| GB/T 31134-2014 |
Fiber reinforced epoxy powder moulding compounds（EP-PMC）for electrical purposes 电气用纤维增强环氧粉状模塑料（EP-PMC） |
China National Standards mould |
English PDF |
| GB/T 30924.2-2014 |
Plastics―Ethylene-vinyl acetate(EVAC) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties 塑料 乙烯-乙酸乙烯酯(EVAC)模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 30772-2014 |
Phenolic resin for phenolic moulding compound 酚醛模塑料用酚醛树脂 |
China National Standards mould |
English PDF |
| GB/T 30200-2013 |
Test method for energy consumption of rubber and plastics injection moulding machines 橡胶塑料注射成型机能耗检测方法 |
China National Standards mould |
English PDF |
| GB/T 27797.4-2013 |
Fibre-reinforced plastics - Methods of producing test plates - Part 4：moulding of prepregs 纤维增强塑料 试验板制备方法 第4部分：预浸料模塑 |
China National Standards mould |
English PDF |
| GB/T 3403.3-2013 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds（UF-and UF/MF-PMCs）- Part 3: Requirements for selected moulding compounds 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料（UF-和UF/MF-PMCs） 第3部分: 选定模塑料的要求 |
China National Standards mould |
English PDF |
| GB/T 3403.2-2013 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料（UF-和UF/MF-PMCs） 第2部分：试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 13454.3-2013 |
Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 3: Requirements for selected moulding compounds 塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第3部分：选定模塑料的要求 |
China National Standards mould |
English PDF |
| GB/T 13454.2-2013 |
Plastics - Melamine-formaldehyde powder moulding compounds（MF-PMCs）-Part 2: Preparation of test specimens and determination of properties 塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第2部分：试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 13454.1-2013 |
Plastics - Melamine-formaldehyde powder moulding compounds（MF-PMCs) - Part 1: Designation system and basis for specifications 塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 18261-2013 |
Test method for anti-mildew agents in controlling wood mould and stain fungi 防霉剂对木材霉菌及变色菌防治效力的试验方法 |
China National Standards mould |
English PDF |
| GB/T 27797.9-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 9:moulding of GMT/STC 纤维增强塑料 试验板制备方法 第9部分：GMT/STC模塑 |
China National Standards mould |
English PDF |
| GB/T 27797.8-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC 纤维增强塑料 试验板制备方法 第8部分：SMC及BMC模塑 |
China National Standards mould |
English PDF |
| GB/T 27797.7-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding 纤维增强塑料 试验板制备方法 第7部分：树脂传递模塑 |
China National Standards mould |
English PDF |
| GB/T 27797.6-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding 纤维增强塑料 试验板制备方法 第6部分：拉挤模塑 |
China National Standards mould |
English PDF |
| GB/T 27797.3-2011 |
Fibre-reinforced plastics - Methodsof producing test plates - Part 3: Wet compression moulding 纤维增强塑料 试验板制备方法 第3部分：湿法模塑 |
China National Standards mould |
English PDF |
| GB/T 27797.2-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding 纤维增强塑料 试验板制备方法 第2部分：接触和喷射模塑 |
China National Standards mould |
English PDF |
| GB/T 27797.11-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates 纤维增强塑料 试验板制备方法 第11部分：BMC和其他长纤维模塑料注射模塑 小方片 |
China National Standards mould |
English PDF |
| GB/T 27797.10-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens 纤维增强塑料 试验板制备方法 第10部分：BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑 |
China National Standards mould |
English PDF |
| GB 17927.1-2011 |
Upholstered furniture - Assessment of the resistance to ignition of the mattress and the safa - Part 1: Ignition source:smouldering cigarette 软体家具 床垫和沙发 抗引燃特性的评定 第1部分：阴燃的香烟 |
China National Standards mould |
English PDF |
| GB/T 20875.2-2010 |
Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: moulded thermosets 电气绝缘材料水解稳定性试验方法 第2部分：热固性模塑材料 |
China National Standards mould |
English PDF |
| GB/T 12085.11-2010 |
Optics and optical instruments - Environmental test methods - Part 11: mould growth 光学和光学仪器 环境试验方法 第11部分：长霉 |
China National Standards mould |
English PDF |
| GB/T 26025-2010 |
Specifications for copper mould plates of continuous casting 连续铸钢结晶器用铜模板 |
China National Standards mould |
English PDF |
| GB/T 25634.2-2010 |
Tire mould electro-discharge machines - Part 2：Parameters 电火花轮胎模加工机床 第2部分：参数 |
China National Standards mould |
English PDF |
| GB/T 25634.1-2010 |
Tire mould electro-discharge machines - Part 1: Testing of accuracy 电火花轮胎模加工机床 第1部分：精度检验 |
China National Standards mould |
English PDF |
| GB/T 15597.2-2010 |
Plastics - Poly(methyl methacrylate)(PMMA)moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分：试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 25157-2010 |
Inspections methods of injection moulding machines for rubber and plastics 橡胶塑料注射成型机检测方法 |
China National Standards mould |
English PDF |
| GB/T 25156-2010 |
General specifications of injection moulding machines for rubber and plastics 橡胶塑料注射成型机通用技术条件 |
China National Standards mould |
English PDF |
| GB/T 25143-2010 |
Specification of moulds for vacuum thermoforming 真空成型模技术条件 |
China National Standards mould |
English PDF |
| GB/T 24744-2009 |
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) 产品几何规范(GPS) 技术产品文件(TPD)中模制件的表示法 |
China National Standards mould |
English PDF |
| GB/T 24594-2009 |
Quality alloy mould steels 优质合金模具钢 |
China National Standards mould |
English PDF |
| GB/T 24444-2009 |
Electroslag remelting mould 电渣重熔结晶器 |
China National Standards mould |
English PDF |
| GB/T 24346-2009 |
Textiles - Evaluation for anti-mould activity 纺织品 防霉性能的评价 |
China National Standards mould |
English PDF |
| GB/T 4617-2009 |
Plastics - Phenolic mouldings - Determination of acetone-soluble matter 塑料 酚醛模塑制品 丙酮可溶物的测定 |
China National Standards mould |
English PDF |
| GB/T 15597.1-2009 |
Plastics - Poly(methyl methacrylate)(PMMA)moulding and extrusion materials - Part 1: Designation system and basis for specifications 塑料 聚甲基丙烯酸甲酯（PMMA）模塑和挤塑材料 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 5132.5-2009 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 5: Round laminated moulded rods 电气用热固性树脂工业硬质圆形层压管和棒 第5部分：圆形层压模制棒 |
China National Standards mould |
English PDF |
| GB/T 5019.11-2009 |
Specification for insulating materials based on mica - Part 11: moulding micanite 以云母为基的绝缘材料 第11部分：塑型云母板 |
China National Standards mould |
English PDF |
| GB 13960.10-2009 |
Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders 可移式电动工具的安全 第二部分：单轴立式木铣的专用要求 |
China National Standards mould |
English PDF |
| GB/T 23641-2009 |
Fiber reinforced unsaturated polyester moulding-compounds（SMC and BMC）for electrical purposes 电气用纤维增强不饱和聚酯模塑料(SMC/BMC) |
China National Standards mould |
English PDF |
| GB 22530-2008 |
Safety requirements of injection moulding machines for rubber and plastics 橡胶塑料注射成型机安全要求 |
China National Standards mould |
English PDF |
| GB/T 22470-2008 |
General requirements for environmentally friendly moulding compounds for electrical purpose 电气用环保型模塑料通用要求 |
China National Standards mould |
English PDF |
| GB 1404.3-2008 |
Plastics - Phenolic powder moulding compounds - Part 3: Requirements for selectes moulding compounds 塑料 粉状酚醛模塑料 第3部分：选定模塑料的要求 |
China National Standards mould |
English PDF |
| GB/T 12001.2-2008 |
Plastics - Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials - Part 2: Preparation of test specimens and determination of properties 塑料 未增塑聚氯乙烯模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 12001.1-2008 |
Plastics - Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials - Part 1: Designation system and basis for specifications 塑料 未增塑聚氯乙烯模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 22350-2008 |
moulding plywood 成型胶合板 |
China National Standards mould |
English PDF |
| GB/T 14486-2008 |
Dimensional tolerances for moulded plastic parts 塑料模塑件尺寸公差 |
China National Standards mould |
English PDF |
| GB/T 9352-2008 |
Plastic - Compression moulding of test specimens of thermoplastic materials 塑料 热塑性塑料材料试样的压塑 |
China National Standards mould |
English PDF |
| GB/T 8324-2008 |
Plastics - Determination of bulk factor of moulding materials 塑料 模塑材料体积系数的测定 |
China National Standards mould |
English PDF |
| GB/T 5471-2008 |
Plastics - Compression moulding of test specimens of thermosetting materials 塑料 热固性塑料试样的压塑 |
China National Standards mould |
English PDF |
| GB/T 4616-2008 |
Plastics - Phenolic moulding materials - Determination of acetone-soluble matter（apparent resin content of material in the unmoulded state） 塑料 酚醛模塑料 丙酮可溶物（未模塑态材料的表观树脂含量）测定 |
China National Standards mould |
English PDF |
| GB/T 3403.1-2008 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds（UF-and UF/MF-PMCs）- Part 1: Designation system and basis for specifications 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料（UF-和UF/MF-PMCs） 第1部分： 命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 22271.2-2008 |
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤塑材料 第2部分：试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 22271.1-2008 |
Plastics - Polyoxymethylene(POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications 塑料 聚甲醛（POM）模塑和挤塑材料 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 1404.2-2008 |
Plastics - Phenolic powder moulding compounds - Part 2: Preparation of test specimens and determination of properties 塑料 粉状酚醛模塑料 第2部分: 试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 1404.1-2008 |
Plastics - Phenolic powder moulding compounds - Part 1: Designation system and basis for specifications 塑料 粉状酚醛模塑料 第1部分: 命名方法和基础规范 |
China National Standards mould |
English PDF |
| GB/T 21461.1-2008 |
Plastics - Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 21460.1-2008 |
Plastics － Styrene-acrylonitrile (SAN) moulding and extrusion materials － Part 1: Designation system and basis for specifications 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 20417.1-2008 |
Plastics － Acrylonitrile-butadiene-Styrene(ABS) moulding and extrusion materials － Part 1: Designation system and basis for specifications 塑料 丙烯腈-丁二烯-苯乙烯(ABS)模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 18964.1-2008 |
Plastics － Impact-resistant Polystyrene (PS-I) moulding and extrusion materials －Part 1: Designation system and basis for specifications 塑料 抗冲击聚苯乙烯(PS-I)模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 4768-2008 |
mould-proof packaging 防霉包装 |
China National Standards mould |
English PDF |
| GB/Z 22074-2008 |
Reliability test method for moulded case circuit-breakers 塑料外壳式断路器可靠性试验方法 |
China National Standards mould |
English PDF |
| GB/T 14225-2008 |
mouldboard plough 铧式犁 |
China National Standards mould |
English PDF |
| GB/T 21684-2008 |
Woodworking machines - Two-, three- and four-side moulding machines - Nomenclature and acceptance conditions 木工机床 二、三、四面铣床 术语和精度 |
China National Standards mould |
English PDF |
| GB/T 13570-2008 |
Woodworking machines - Single spindle moulding machines - Nomenclature and acceptance conditions 木工机床 单轴铣床 术语和精度 |
China National Standards mould |
English PDF |
| GB/T 21461.2-2008 |
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 21460.2-2008 |
Plastics - Styrene/acrylonitrile(SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 14663-2007 |
Specification of plastic packaging moulds 塑封模技术条件 |
China National Standards mould |
English PDF |
| GB/T 4170-2006 |
Specification of components of injection moulds for plastics 塑料注射模零件技术条件 |
China National Standards mould |
English PDF |
| GB/T 4169.9-2006 |
Components of injection moulds for plastics - Part 9: Stop pin 塑料注射模零件 第9部分：限位钉 |
China National Standards mould |
English PDF |
| GB/T 4169.8-2006 |
Components of injection moulds for plastics ― Part 8:Mould plate 塑料注射模零件 第8部分：模板 |
China National Standards mould |
English PDF |
| GB/T 4169.7-2006 |
Components of injection moulds for plastics - Part 7: Ejector plate 塑料注射模零件 第7部分：推板 |
China National Standards mould |
English PDF |
| GB/T 4169.6-2006 |
Components of injection moulds for plastics - Part 6: Spacer block 塑料注射模零件 第6部分：垫块 |
China National Standards mould |
English PDF |
| GB/T 4169.5-2006 |
Components of injection moulds for plastics - Part 5: Shouldered guide pillar 塑料注射模零件 第5部分：带肩导柱 |
China National Standards mould |
English PDF |
| GB/T 4169.4-2006 |
Components of injection moulds for plastics - Part 4: Headed guide pillar 塑料注射模零件 第4部分：带头导柱 |
China National Standards mould |
English PDF |
| GB/T 4169.3-2006 |
Components of injection moulds for plastics - Part 3: Headed guide bush 塑料注射模零件 第3部分：带头导套 |
China National Standards mould |
English PDF |
| GB/T 4169.23-2006 |
Components of injection moulds for plastics - Part 23: Rectangular mould opening delayer 塑料注射模零件 第23部分:矩形拉模扣 |
China National Standards mould |
English PDF |
| GB/T 4169.22-2006 |
Components of injection moulds for plastics - Part 22: Round mould opening delayer 塑料注射模零件 第22部分: 圆形拉模扣 |
China National Standards mould |
English PDF |
| GB/T 4169.2-2006 |
Components of injection moulds for plastics - Part 2: Straight guide bush 塑料注射模零件 第2部分：直导套 |
China National Standards mould |
English PDF |
| GB/T 4169.21-2006 |
Components of injection moulds for plastics - Part 21: Rectangular locating element 塑料注射模零件 第21部分:矩形定位元件 |
China National Standards mould |
English PDF |
| GB/T 4169.20-2006 |
Components of injection moulds for plastics - Part 20: Limit pin 塑料注射模零件 第20部分:拉杆导柱 |
China National Standards mould |
English PDF |
| GB/T 4169.19-2006 |
Components of injection moulds for plastics - Part 19: Sprue bush 塑料注射模零件 第19部分:浇口套 |
China National Standards mould |
English PDF |
| GB/T 4169.18-2006 |
Components of injection moulds for plastics - Part 18: Locating ring 塑料注射模零件 第18部分:定位圈 |
China National Standards mould |
English PDF |
| GB/T 4169.17-2006 |
Components of injection moulds for plastics - Part 17: Ejector sleeve 塑料注射模零件 第17部分:推管 |
China National Standards mould |
English PDF |
| GB/T 4169.16-2006 |
Components of injection moulds for plastics - Part 16: Shouldered ejector pin 塑料注射模零件 第16部分: 带肩推杆 |
China National Standards mould |
English PDF |
| GB/T 4169.15-2006 |
Components of injection moulds for plastics - Part 15: Flat ejector pin 塑料注射模零件 第15部分: 扁推杆 |
China National Standards mould |
English PDF |
| GB/T 4169.14-2006 |
Components of injection moulds for plastics - Part 14: Ejector guide pillar 塑料注射模零件 第14部分：推板导柱 |
China National Standards mould |
English PDF |
| GB/T 4169.13-2006 |
Components of injection moulds for plastics ― Part 13: Return pin 塑料注射模零件 第13部分：复位杆 |
China National Standards mould |
English PDF |
| GB/T 4169.12-2006 |
Components of injection moulds for plastics - Part 12: Ejector guide bush 塑料注射模零件 第12部分：推板导套 |
China National Standards mould |
English PDF |
| GB/T 4169.1-2006 |
Components of injection moulds for plastics - Part 1: Ejector pin 塑料注射模零件 第1部分：推杆 |
China National Standards mould |
English PDF |
| GB/T 4169.11-2006 |
Components of injection moulds for plastics - Part 11: Round locating element 塑料注射模零件 第11部分：圆形定位元件 |
China National Standards mould |
English PDF |
| GB/T 4169.10-2006 |
Components of injection moulds for plastics - Part 10: Support pillar 塑料注射模零件 第10部分：支承柱 |
China National Standards mould |
English PDF |
| GB/T 12556-2006 |
Specification of injection mould bases for plastics 塑料注射模模架技术条件 |
China National Standards mould |
English PDF |
| GB/T 12555-2006 |
Injection mould bases for plastics 塑料注射模模架 |
China National Standards mould |
English PDF |
| GB/T 12554-2006 |
Specifiication of injection moulds for plastics 塑料注射模技术条件 |
China National Standards mould |
English PDF |
| GB/T 1040.2-2006 |
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics 塑料 拉伸性能的测定 第2部分：模塑和挤塑塑料的试验条件 |
China National Standards mould |
English PDF |
| GB/T 20467-2006 |
Flexible cellular polymeric materials - moulded and extruded sponge or expanded cellular rubber products - Compressibility test on finished parts 软质泡沫聚合材料 模压和挤出海绵胶制品 成品的压缩性能试验 |
China National Standards mould |
English PDF |
| GB/T 20309-2006 |
Textile glass - Mats and fabrics - Determination of contact mouldability 玻璃纤维毡和织物覆模性的测定 |
China National Standards mould |
English PDF |
| GB/T 20446-2006 |
Wood moulding 木线条 |
China National Standards mould |
English PDF |
| GB/T 20390.1-2006 |
Textiles―Burning behaviour of bedding items―Part 1: Test methods for the ignitability by a smouldering cigarette 纺织品 床上用品燃烧性能 第1部分：香烟为点火源的可点燃性试验方法 |
China National Standards mould |
English PDF |
| GB/T 10588-2006 |
Specifications for mould growth testing chambers 长霉试验箱技术条件 |
China National Standards mould |
English PDF |
| GB/T 5169.19-2006 |
Fire hazard testing for electric and eletronic products - Part 19: Abnormal heat - mould stress relief distortion test 电工电子产品着火危险试验 第19部分：非正常热 模压应力释放变形试验 |
China National Standards mould |
English PDF |
| GB 20265-2006 |
moulded plastics industrial boots with chemical resistance 耐化学品的工业用模压塑料靴 |
China National Standards mould |
English PDF |
| GB/T 20089-2006 |
Machinery and equipment for working the soil - mouldboard plough working elements - Vocabulary 土壤耕作机械 铧式犁工作部件 词汇 |
China National Standards mould |
English PDF |
| GB/T 2546.1-2006 |
Plastics―Polypropylene(PP) moulding and extrusion materials―Part 1: Designation system and basis for specifications 塑料 聚丙烯（PP〕模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 20417.2-2006 |
Plastics―Acrylonitrile-butadiene-styrene(ABS)moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties 塑料 丙烯腈-丁二烯-苯乙烯 (ABS) 模塑和挤出材料 第2部分:试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 1845.2-2006 |
Plastics―Polyethylene(PE) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties 塑料 聚乙烯 (PE) 模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB 20007-2005 |
Safety of woodworking machines -- Single spindle moulding machines 木工机床安全 单轴铣床 |
China National Standards mould |
English PDF |
| GB 19999-2005 |
Safety of woodworking machines -- Four-side moulding Machines and four-side planing machies 木工机床安全 四面铣床和四面刨床 |
China National Standards mould |
English PDF |
| GB/T 8846-2005 |
Terminology of moulds for plastics 塑料成型模术语 |
China National Standards mould |
English PDF |
| GB/T 16935.3-2005 |
Insulation coordination for equipment within low-voltage systems Part 3:Use of coating,potting or moulding for protection against pollution 低压系统内设备的绝缘配合 第3部分：利用涂层、罐封和模压进行防污保护 |
China National Standards mould |
English PDF |
| GB/T 19701.2-2005 |
Implants for surgery Ultra-high molecular weight polyethylene-part 2:moulded forms 外科植入物 超高分子量聚乙烯 第2部分:模塑料 |
China National Standards mould |
English PDF |
| GB/T 19467.1-2004 |
Plastics--Acquisition and presentation of comparable single-point data--Part 1:moulding materials 塑料 可比单点数据的获得和表示 第1部分:模塑材料 |
China National Standards mould |
English PDF |
| GB/T 4678.1-2003 |
Die-casting die components--Part 1: mould plate 压铸模零件 第1部分:模板 |
China National Standards mould |
English PDF |
| GB/T 6594.2-2003 |
Plastics--Polystyrene(PS) moulding and extrusion materials--Part 2: Preparation of testspecimens and determination of properties 塑料 聚苯乙烯(PS)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 2546.2-2003 |
Plastics--Polypropylene(PP) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties 塑料 聚丙烯(PP)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 18964.2-2003 |
Plastics--Impact-resistant polystyrene(PS-I) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties 塑料 抗冲击聚苯乙烯(PS-I)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards mould |
English PDF |
| GB/T 17037.4-2003 |
Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage 塑料 热塑性塑料材料注塑试样的制备 第4部分: 模塑收缩率的测定 |
China National Standards mould |
English PDF |
| GB/T 17037.3-2003 |
Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates 塑料 热塑性塑料材料注塑试样的制备 第3部分: 小方试片 |
China National Standards mould |
English PDF |
| GB/T 10801.1-2002 |
moulded polystyrene foam board for thermal insulation 绝热用模塑聚苯乙烯泡沫塑料 |
China National Standards mould |
English PDF |
| GB/T 18525.5-2001 |
Code of good irradiation practice for the control of moulds and insect disinfestation in desiccated xianggu mushroom 干香菇辐照杀虫防霉工艺 |
China National Standards mould |
English PDF |
| GB/T 8803-2001 |
Injection-moulded unplasticized poly(vinyl chloride)(PVC-U)，chlorinated poly(vinyl chloride)(PVC-C)，acrylonitrile butadiene-styrene(ABS)and acrylonitrile-styrene-acrylester(ASA)fittings--Hot oven test method 注射成型硬质聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)、丙烯腈-丁二烯-苯乙烯三元共聚物(ABS)和丙烯腈-苯乙烯-丙烯酸盐三元共聚物(ASA)管件 热烘箱试验方法 |
China National Standards mould |
English PDF |
| GB/T 17980.28-2000 |
Pesticide--Guidelines for the field efficacy trials(I)--Fungicides against grey mould of vegetables 农药 田间药效试验准则(一) 杀菌剂防治蔬菜灰霉病 |
China National Standards mould |
English PDF |
| GB/T 1845.1-1999 |
Polyethylene(PE) moulding and extrusion materials--Part 1:Designation system and basis for specifications 聚乙烯(PE)模塑和挤出材料 第1部分:命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 6594.1-1998 |
Polystyrene (PS) moulding and extrusion materials--Part 1:Designation system and basis for specifications 聚苯乙烯(PS)模塑和挤出材料 第1部分:命名系统和分类基础 |
China National Standards mould |
English PDF |
| GB/T 17037.1-1997 |
Injection moulding of test specimens of thermoplastic materials--Part 1:General principles and moulding of multipurpose and bar test specimens 热塑性塑料材料注塑试样的制备 第1部分:一般原理及多用途试样和长条试样的制备 |
China National Standards mould |
English PDF |
| GB/T 13455-1992 |
Plastics--Aminoplastic moulding materials--Determination of volatile matter 氨基模塑料挥发物测定方法 |
China National Standards mould |
English PDF |
| GB/T 7130-1986 |
Determination of free phenols in phenol-formaldehyde mouldings--Iodometric method 酚醛模塑制品中游离酚的测定 碘量法 |
China National Standards mould |
English PDF |
| GB/T 5474-1985 |
Phenol-formaldehyde mouldings--Determination of free ammonia and ammonium compounds--Colorimetric comparison method 酚醛模塑制品游离氨和铵化合物的测定 比色法 |
China National Standards mould |
English PDF |
| GB/T 5473-1985 |
Phenol-formaldehyde mouldings--Detection of free ammonia 酚醛模塑制品游离氨的检定 |
China National Standards mould |
English PDF |
| Find out:200Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
