Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43618-2023 |
Non-destructive testing process tower gamma ray scanning method {译} 无损检测 工艺塔伽马射线扫描方法 |
China National Standards scan |
 English PDF |
| GB/T 43196-2023 |
Nanotechnology scanning electron microscopy to measure nanoparticle size and shape distribution {译} 纳米技术 扫描电子显微术测量纳米颗粒粒度及形状分布 |
China National Standards scan |
English PDF |
| GB/T 42659-2023 |
Surface chemical analysis scanning probe microscopy Determination of geometric quantities using scanning probe microscopy: Calibration of measurement systems {译} 表面化学分析 扫描探针显微术 采用扫描探针显微镜测定几何量：测量系统校准 |
China National Standards scan |
English PDF |
| GB/T 23698-2023 |
General requirements for 3D scanning anthropometric methods {译} 三维扫描人体测量方法的一般要求 |
China National Standards scan |
English PDF |
| GB/T 42543-2023 |
Surface Chemical Analysis scanning Probe Microscopy Determination of the Normal Elastic Constant of a Cantilever Beam {译} 表面化学分析 扫描探针显微术 悬臂梁法向弹性常数的测定 |
China National Standards scan |
English PDF |
| GB/T 22461.2-2023 |
Surface chemical analysis - Vocabulary Part 2: scanning probe microscopy terminology {译} 表面化学分析 词汇 第2部分： 扫描探针显微术术语 |
China National Standards scan |
English PDF |
| GB/T 30020-2023 |
Glass defect detection method Photoelastic scanning method {译} 玻璃缺陷检测方法 光弹扫描法 |
China National Standards scan |
English PDF |
| GB/T 32280-2022 |
Test method for warp and bow of silicon wafers—Automated non-contact scanning method 硅片翘曲度和弯曲度的测试 自动非接触扫描法 |
China National Standards scan |
English PDF |
| GB/T 20278-2022 |
Information security technology—Security technical requirements and testing assessment approaches for network vulnerability scanners 信息安全技术 网络脆弱性扫描产品安全技术要求和测试评价方法 |
China National Standards scan |
English PDF |
| GB/T 33523.604-2022 |
Product Geometry Specification (GPS) Surface Structure Area Method Part 604: Nominal Characteristics of Non-Contact (Coherent scanning Interferometry) Type Instruments {译} 产品几何技术规范（GPS） 表面结构 区域法 第604部分：非接触（相干扫描干涉）式仪器的标称特性 |
China National Standards scan |
English PDF |
| GB/T 42257-2022 |
Chromium-erbium co-doped yttrium-scandium-gallium garnet crystal optical and laser performance measurement method {译} 铬铒共掺钇钪镓石榴石晶体光学及激光性能测量方法 |
China National Standards scan |
English PDF |
| GB/T 41928-2022 |
Plastics epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC) {译} 塑料 环氧树脂 差示扫描量热法（DSC）测定交联环氧树脂交联度 |
China National Standards scan |
English PDF |
| GB/T 19466.5-2022 |
Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction curve temperature, time, enthalpy of reaction and conversion {译} 塑料 差示扫描量热法(DSC) 第5部分: 特征反应曲线温度、时间，反应焓和转化率的测定 |
China National Standards scan |
English PDF |
| GB/T 40905.2-2022 |
Textiles - Quantitative analysis of cashmere, sheep wool, other special animal fibers and their mixtures - Part 2: scanning electron microscopy {译} 纺织品 山羊绒、绵羊毛、其他特种动物纤维及其混合物定量分析 第2部分：扫描电镜法 |
China National Standards scan |
English PDF |
| GB/T 30834-2022 |
Evaluation and statistics of non-metallic inclusions in steel - scanning electron microscopy {译} 钢中非金属夹杂物的评定和统计 扫描电镜法 |
China National Standards scan |
English PDF |
| GB/T 40271-2021 |
Test method for identification of textile fibers—Differential scanningcalorimetry(DSC) 纺织纤维鉴别试验方法 差示扫描量热法（DSC） |
China National Standards scan |
English PDF |
| GB/T 39756-2021 |
General specification for the scanning voice reading machine 扫描式语音读书机通用技术条件 |
China National Standards scan |
English PDF |
| GB/T 40826-2021 |
Test method for hand-arranging staple length of dehaired cashmere—Flatbed scanner method 分梳山羊绒手排长度试验方法 图板电子扫描仪法 |
China National Standards scan |
English PDF |
| GB/T 39111-2020 |
Technical requirements for dental model 3D scanner 牙颌模型三维扫描仪技术要求 |
China National Standards scan |
English PDF |
| GB/T 38783-2020 |
Method of coating thickness determination for precious metal composites by scanning electron microscope 贵金属复合材料覆层厚度的扫描电镜测定方法 |
China National Standards scan |
English PDF |
| GB/T 27788-2020 |
Microbeam analysis—scanning electron microscopy—Guidelines for calibrating image magnification 微束分析 扫描电镜 图像放大倍率校准导则 |
China National Standards scan |
English PDF |
| GB/T 38616-2020 |
Terminology for nano positioning and scaning stage 纳米定位与扫描平台术语 |
China National Standards scan |
English PDF |
| GB/T 38614-2020 |
Measuring method for nano positioning and scanning stage based on flexible hinge mechanism and piezo actuator 基于柔性铰链机构和压电陶瓷驱动器的纳米定位与扫描平台测量方法 |
China National Standards scan |
English PDF |
| GB/T 38537-2020 |
Ultrasonic testing method for fiber reinforced resin matrix composites—C-scan method 纤维增强树脂基复合材料超声检测方法 C扫描法 |
China National Standards scan |
English PDF |
| GB/T 37945-2019 |
Materials for organic light emitting diode display(OLED)—Test method of glass transfer temperature—Differential scanning calorimetry (DSC) 有机发光二极管显示器用材料 玻璃化转变温度测试方法 差热法 |
China National Standards scan |
English PDF |
| GB/T 19314.9-2019 |
Small craft—Hull construction and scantlings—Part 9:Sailing craft appendages 小艇 艇体结构和构件尺寸 第9部分：帆艇附体 |
China National Standards scan |
English PDF |
| GB/T 19314.8-2019 |
Small craft—Hull construction and scantlings—Part 8:Rudders 小艇 艇体结构和构件尺寸 第8部分：舵 |
China National Standards scan |
English PDF |
| GB/T 19314.7-2019 |
Small craft—Hull construction and scantlings—Part 7:Scantling determination of multihulls 小艇 艇体结构和构件尺寸 第7部分：多体船尺寸的确定 |
China National Standards scan |
English PDF |
| GB/T 19314.6-2019 |
Small craft—Hull construction and scantlings—Part 6:Structural arrangements and detail 小艇 艇体结构和构件尺寸 第6部分：结构布置和细则 |
China National Standards scan |
English PDF |
| GB/T 19314.5-2019 |
Small craft—Hull construction and scantlings—Part 5:Design pressures for monohulls,design stresses,scantlings determination 小艇 艇体结构和构件尺寸 第5部分：单体船设计压力、设计应力、构件尺寸的确定 |
China National Standards scan |
English PDF |
| GB/T 19314.4-2019 |
Small craft—Hull construction and scantlings—Part 5:Design pressures for monohulls,design stresses,scantlings determination 小艇 艇体结构和构件尺寸 第4部分：车间和制造 |
China National Standards scan |
English PDF |
| GB/T 19314.3-2019 |
Small craft—Hull construction and scantlings—Part 3:Materials:Steel,aluminium alloys,wood,other materials 小艇 艇体结构和构件尺寸 第3部分：材料：钢、铝合金、木材、其他材料 |
China National Standards scan |
English PDF |
| GB/T 19314.2-2019 |
Small craft—Hull construction and scantlings—Part 2:Materials: Core materials for sandwich construction, embedded materials 小艇 艇体结构和构件尺寸 第2部分：材料：夹层结构用芯材、埋置材料 |
China National Standards scan |
English PDF |
| GB/T 20493.3-2018 |
Electronic imaging—Test target for scanning of office documents—Part3:Test target for use in lower resolution applications 电子成像-办公文件扫描用测试标板-第3部分：较低解像力应用测试标板 |
China National Standards scan |
English PDF |
| GB/T 36965-2018 |
Test method for cross-linking degree of ethylene-vinyl acetate copolymer applied in photovoltaic modules—Differential scanning calorimetry（DSC） 光伏组件用乙烯—醋酸乙烯共聚物交联度测试方法-差示扫描量热法 |
China National Standards scan |
English PDF |
| GB/T 36473-2018 |
Information technology—General specification of documents camera scanne 信息技术 文档拍摄仪通用规范 |
China National Standards scan |
English PDF |
| GB/T 35099-2018 |
Microbeam analysis—scanning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single fine particles in ambient air 微束分析 扫描电镜-能谱法 大气细粒子单颗粒形貌与元素分析 |
China National Standards scan |
English PDF |
| GB/T 35097-2018 |
Microbeam analysis—scanning electron microscopy with energy dispersive X-ray spectrosmetry—Determination of numberical concentration of inorganic fibrous particles in ambient air 微束分析 扫描电镜-能谱法 环境空气中石棉等无机纤维状颗粒计数浓度的测定 |
China National Standards scan |
English PDF |
| GB/T 20975.27-2018 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 27：Determination of cerium,lanthanum,scandium—Inductively coupled plasma atomic emission spectrometry method 铝及铝合金化学分析方法 第27部分：铈、镧、钪含量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards scan |
English PDF |
| GB/T 13219-2018 |
scandium oxide 氧化钪 |
China National Standards scan |
English PDF |
| GB/T 16476-2018 |
scandium metal 金属钪 |
China National Standards scan |
English PDF |
| GB/T 36422-2018 |
Man-made fiber—Test method for micro morphology and diameter—scanning electron microscope method 化学纤维 微观形貌及直径的测定 扫描电镜法 |
China National Standards scan |
English PDF |
| GB/T 36556-2018 |
Technical requirements for anti-counterfeiting of cascaded image element scanning 扫描图像元级联防伪技术条件 |
China National Standards scan |
English PDF |
| GB/T 36557-2018 |
General technical requirements of image element scanning instant machine-readable device 扫描图像元快速机读鉴别仪通用技术条件 |
China National Standards scan |
English PDF |
| GB/T 35935-2018 |
Measurement of the mean and distribution of animal fibre diameter—Laserscan fibre diameter analysis method 动物毛纤维平均直径与分布试验方法 激光扫描纤维直径分析法 |
China National Standards scan |
English PDF |
| GB/T 36052-2018 |
Surface chemical analysis—Data transfer format for scanning probe microscopy 表面化学分析 扫描探针显微镜数据传送格式 |
China National Standards scan |
English PDF |
| GB/T 34361-2017 |
Non-destructive testing—Test method for frequency scanning eddy current testing 无损检测 扫频涡流检测方法 |
China National Standards scan |
English PDF |
| GB/T 34018-2017 |
Non-destructive testing—Test method for scanning ultrasonic microscopy 无损检测 超声显微检测方法 |
China National Standards scan |
English PDF |
| GB/T 33834-2017 |
Microbeam analysis—scanning electron microscopy—Scanning electron microscope analysis of biological specimens 微束分析 扫描电子显微术 生物试样扫描电子显微镜分析方法 |
China National Standards scan |
English PDF |
| GB/T 33838-2017 |
Microbeam analysis—scanning electron microscopy—Methods of evaluating image sharpness 微束分析 扫描电子显微术 图像锐度评估方法 |
China National Standards scan |
English PDF |
| GB/T 33806-2017 |
Technical requirement of area fluorescent imaging microarray scanner 面阵荧光成像微阵列芯片扫描仪技术要求 |
China National Standards scan |
English PDF |
| GB/T 33805-2017 |
Technical requirement of laser confocal biochip scanner 激光共聚焦生物芯片扫描仪技术要求 |
China National Standards scan |
English PDF |
| GB/T 33466.1-2016 |
Rigid PVC pipes—Differential scanning calorimetry(DSC) method—Part 1: Measurement of the processing temperature 硬聚氯乙烯管材 差示扫描量热法(DSC) 第1部分：加工温度的测量 |
China National Standards scan |
English PDF |
| GB/T 19466.4-2016 |
Plastics—Differential scanning calorimetry （DSC）—Part 4: Determination of specific heat capacity 塑料 差示扫描量热法（DSC） 第4部分：比热容的测定 |
China National Standards scan |
English PDF |
| GB/T 32869-2016 |
Nanotechnologies—Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis 纳米技术 单壁碳纳米管的扫描电子显微术和能量色散X射线谱表征方法 |
China National Standards scan |
English PDF |
| GB/T 32681-2016 |
Plastics—Phenolic resin —Determination of heats and temperatures of reaction by differential scanning calorimetry 塑料 酚醛树脂 用差示扫描量热计法测定反应热和反应温度 |
China National Standards scan |
English PDF |
| GB/T 32280-2015 |
Test method for warp of silicon wafers—Automated non-contact scanning method 硅片翘曲度测试 自动非接触扫描法 |
China National Standards scan |
English PDF |
| GB/T 31563-2015 |
Metallic coatings—Measurement of coating thickness—scanning electron microscope method 金属覆盖层 厚度测量 扫描电镜法 |
China National Standards scan |
English PDF |
| GB/T 31226-2014 |
Standard test method for determination of surface roughness by scanning tunneling microscopy for gas distribution system components 扫描隧道显微术测定气体配送系统部件表面粗糙度的方法 |
China National Standards scan |
English PDF |
| GB/T 30834-2014 |
Standard test methods for rating and classifying inclusions in steel―scanning Electron Microscope 钢中非金属夹杂物的评定和统计 扫描电镜法 |
China National Standards scan |
English PDF |
| GB/T 30538-2014 |
Document management applications―Quality control for scanning office documents in colour 文件管理应用 办公文件彩色扫描的质量控制 |
China National Standards scan |
English PDF |
| GB/T 20278-2013 |
Information security technology—Security technical requirements for network vulnerability scanners 信息安全技术 网络脆弱性扫描产品安全技术要求 |
China National Standards scan |
English PDF |
| GB/T 30020-2013 |
Test method for the defects of glass - Photoelastic scanning method 玻璃缺陷检测方法 光弹扫描法 |
China National Standards scan |
English PDF |
| GB/T 17361-2013 |
Microbeam analysis - Identification of authigenic clay mineral in sedimentary rock menthod by scanning electron microscope and energy dispersive spectrometer 微束分析 沉积岩中自生粘土矿物鉴定 扫描电子显微镜及能谱仪方法 |
China National Standards scan |
English PDF |
| GB/T 29611-2013 |
Rubber ,raw - Determination of the glass transition temperature - Differential scanning calorimetry (DSC) 生橡胶 玻璃化转变温度的测定 差示扫描量热法（DSC） |
China National Standards scan |
English PDF |
| GB/T 29507-2013 |
Test method for measuring flatness, thickness and total thickness variation on silicon wafers by automated non-contact scanning 硅片平整度、厚度及总厚度变化测试 自动非接触扫描法 |
China National Standards scan |
English PDF |
| GB/T 16840.6-2012 |
Technical determination methods for electrical fire evidence - Part 6：Micro-morphological analysis method using scanning electron microscope 电气火灾痕迹物证技术鉴定方法 第6部分：SEM微观形貌分析法 |
China National Standards scan |
English PDF |
| GB/T 29190-2012 |
Measurement methods of drift rate of scanning probe microscope 扫描探针显微镜漂移速率测量方法 |
China National Standards scan |
English PDF |
| GB/T 28873-2012 |
General guide of environmental scanning electron microscopy for biological effects on topography induced by nanoparticles 纳米颗粒生物形貌效应的环境扫描电子显微镜检测方法通则 |
China National Standards scan |
English PDF |
| GB/T 28724-2012 |
Determination of melting temperature for chemicals (pharmaceuticals) - Differential scanning calorimetry(DSC) 固体有机化学品熔点的测定 差示扫描量热法 |
China National Standards scan |
English PDF |
| GB/T 28723-2012 |
Determination of purity for chemicals (pharmaceuticals) - Differential scanning calorimetry (DSC) 固体有机化学品纯度的测定 差示扫描量热法 |
China National Standards scan |
English PDF |
| GB/T 27788-2011 |
Microbeam analysis - scanning electron microscopy - Guidelines for calibrating image magnification 微束分析 扫描电镜 图像放大倍率校准导则 |
China National Standards scan |
English PDF |
| GB/T 28166-2011 |
General specification for sheetfed scanner 馈纸式扫描仪通用规范 |
China National Standards scan |
English PDF |
| GB 17589-2011 |
Specifications for quality assurance test for computed tomography X-ray scanners X射线计算机断层摄影装置质量保证检测规范 |
China National Standards scan |
English PDF |
| GB/T 28031-2011 |
Information technology - Office equipment - Minimum information to be specified for image scanners 信息技术 办公设备 图像扫描设备规格表中包含的最基本内容 |
China National Standards scan |
English PDF |
| GB/T 16476-2010 |
scandium metal 金属钪 |
China National Standards scan |
English PDF |
| GB/T 13219-2010 |
scandium oxide 氧化钪 |
China National Standards scan |
English PDF |
| GB/Z 26083-2010 |
Determination for Copper(II) octaalkoxyl-substituted phthalocyanine on graphite surface (scanning tunneling microscope) 八辛氧基酞菁铜分子在石墨表面吸附结构的测试方法（扫描隧道显微镜） |
China National Standards scan |
English PDF |
| GB/T 25885-2010 |
Measurement of the mean and distribution of fibre diameter for wool - The laserscan fiber diameter analyser 羊毛纤维平均直径及其分布试验方法 激光扫描仪法 |
China National Standards scan |
English PDF |
| GB/T 25758.1-2010 |
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: scanning method 无损检测 工业X射线系统焦点特性 第1部分：扫描方法 |
China National Standards scan |
English PDF |
| GB/T 17417.2-2010 |
Method for chemical analysis of rare earth ores - Part 2: Determination of scandium content 稀土矿石化学分析方法 第2部分：钪量测定 |
China National Standards scan |
English PDF |
| GB/T 6620-2009 |
Test method for measuring warp on silicon slices by noncontact scanning 硅片翘曲度非接触式测试方法 |
China National Standards scan |
English PDF |
| GB/T 19466.6-2009 |
Plastics - Differential scanning calorimetry（DSC）- Part 6: Determination of oxidation induction time（isothermal OIT）and oxidation induction temperature（dynamic OIT） 塑料 差示扫描量热法（DSC）第6部分：氧化诱导时间(等温OIT)和氧化诱导温度（动态OIT）的测定 |
China National Standards scan |
English PDF |
| GB/T 23698-2009 |
General requirements for 3-D scanning anthropometric methodologies 三维扫描人体测量方法的一般要求 |
China National Standards scan |
English PDF |
| GB/T 23414-2009 |
Microbeam analysis - scanning electron microscopy - Vocabulary 微束分析 扫描电子显微术 术语 |
China National Standards scan |
English PDF |
| GB/T 14593-2008 |
Quantitative analysis method of cashmere, wool and their blends - scanning electron microscope method 山羊绒、绵羊毛及其混合纤维定量分析方法 扫描电镜法 |
China National Standards scan |
English PDF |
| GB/T 19267.6-2008 |
Physical and chemical examination of trace evidence in forensic sciences - Part 6:scanning electron microscope/ X ray energy dispersive spectrometry 刑事技术微量物证的理化检验 第6部分：扫描电子显微镜/X射线能谱法 |
China National Standards scan |
English PDF |
| GB/T 18788-2008 |
General specification for flatbed scanner 平板式扫描仪通用规范 |
China National Standards scan |
English PDF |
| GB/T 22232-2008 |
Test method for the thermal stability of chemicals by differential scanning calorimetry 化学物质的热稳定性测定 差示扫描量热法 |
China National Standards scan |
English PDF |
| GB/T 20493.2-2006 |
Electronic imaging - Test target for the black-and-white scanning of office documents - Part 2: Method of use 电子成像 办公文件黑白扫描用测试标板 第2部分：使用方法 |
China National Standards scan |
English PDF |
| GB/T 20493.1-2006 |
Electronic imaging - Test target for the black-and-white scanning of office documents - Part 1: Characteristics 电子成像 办公文件黑白扫描用测试标板 第1部分：特性 |
China National Standards scan |
English PDF |
| GB/T 20280-2006 |
Information security technology Testing and evaluation approaches for network vulnerability scanners 信息安全技术 网络脆弱性扫描产品测试评价方法 |
China National Standards scan |
English PDF |
| GB/T 16404.3-2006 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning 声学 声强法测定噪声源声功率级 第3部分：扫描测量精密法 |
China National Standards scan |
English PDF |
| GB/T 20127.9-2006 |
Steel and alloy - Determination of trace element contents Part 9: Determination of scandium content by inductively coupled plasma atomic emission spectrometric method 钢铁及合金 痕量元素的测定 第9部分：电感耦合等离子体发射光谱法测定钪含量 |
China National Standards scan |
English PDF |
| GB/T 19922-2005 |
Standard test methods for measuring site flatness on silicon wafers by noncontact scanning 硅片局部平整度非接触式标准测试方法 |
China National Standards scan |
English PDF |
| GB/T 19475.2-2004 |
Micrographics--Methods of measuring image quality produced by aperture card scanners--Part 2:Quality criteria and control 缩微摄影技术 开窗卡扫描仪制作影像质量的测量方法 第2部分:质量要求和控制 |
China National Standards scan |
English PDF |
| GB/T 19475.1-2004 |
Micrographics--Methods of measuring image quality produced by aperture card scanners--Part 1:Characteristics of the test images 缩微摄影技术 开窗卡扫描仪制作影像质量的测量方法 第1部分:测试影像的特征 |
China National Standards scan |
English PDF |
| GB/T 19466.3-2004 |
Plastics--Differential scanning calorimetry(DSC)--Part 3:Determination of temperatureand enthalpy of melting and crystallization 塑料 差示扫描量热法(DSC) 第3部分:熔融和结晶温度及热焓的测定 |
China National Standards scan |
English PDF |
| GB/T 19466.2-2004 |
Plastics--Differential scanning calorimetry(DSC)--Part 2:Determination of glass transition temperature 塑料 差示扫描量热法(DSC) 第2部分:玻璃化转变温度的测定 |
China National Standards scan |
English PDF |
| GB/T 19466.1-2004 |
Plastics--Differential scanning calorimetry(DSC)--Part 1:General principles 塑料 差示扫描量热法(DSC) 第1部分:通则 |
China National Standards scan |
English PDF |
| GB/T 19314.1-2003 |
Small craft--Hull construction and scantlings--Part 1: Materials: Thermosetting resins，glass-fibre reinforcement，reference laminate 小艇 艇体结构和构件尺寸 第1部分:材料:热固性树脂、玻璃纤维增强塑料、基准层合板 |
China National Standards scan |
English PDF |
| GB/T 16857.4-2003 |
Geometrical Product Specifications(GPS)--Acceptance andreverification tests for coordinate measuring machines(CMM)--Part 4: CMMs used in scanning measuring mode 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第4部分: 在扫描模式下使用的坐标测量机 |
China National Standards scan |
English PDF |
| GB/T 6672-2001 |
Plastics film and sheeting--Determination of thickness by mechanical scanning 塑料薄膜和薄片厚度测定 机械测量法 |
China National Standards scan |
English PDF |
| GB/T 18295-2001 |
Analysis method of sandstone sample of petroleum and gas reservoir by scanning electron microscope 油气储层砂岩样品 扫描电子显微镜分析方法 |
China National Standards scan |
English PDF |
| GB/T 7399.3-1999 |
Helical-scan video tape cassette system using 12.65 mm magnetic tape on type S-VHS S-VHS型12.65 mm螺旋扫描盒式磁带录像系统 |
China National Standards scan |
English PDF |
| GB/T 17800.3-1999 |
Helical-scan video tape cassette systems using 8 mm magnetic tape--8 mm video--Part 3:High-band speci-fications for Hi 8 8 mm磁带螺旋扫描盒式录像系统(8 mm录像) 第3部分:Hi 8高带规范 |
China National Standards scan |
English PDF |
| GB/T 17800.2-1999 |
Helical-scan video tape cassette systems using 8 mm magnetic tape--8 mm video--Part 2:PCM multi-track audio system 8 mm磁带螺旋扫描盒式录像系统(8 mm录像) 第2部分:PCM多迹音频系统 |
China National Standards scan |
English PDF |
| GB/T 17800.1-1999 |
Helical-scan video tape cassette systems using 8 mm magnetic tape--8 mm video--Part 1:General speci-fications 8 mm磁带螺旋扫描盒式录像系统(8 mm录像) 第1部分:总规范 |
China National Standards scan |
English PDF |
| GB/T 16404.2-1999 |
Acoustics--Determination of sound power levels of noise sources using sound intensity--Part 2:Measurement by scanning 声学 声强法测定噪声源的声功率级 第2部分:扫描测量 |
China National Standards scan |
English PDF |
| GB/T 15522-1995 |
FM audio recording of helical-scan video tape cassette system using 12.65mm magnetic tape on type VHS VHS型12.65 mm螺旋扫描盒式录像系统的调频音频记录 |
China National Standards scan |
English PDF |
| GB/T 10200-1988 |
Helical-scan video cassette system using 19 mm tape (U-matic H format) 19mm螺旋扫描盒式磁带录像系统(U-matic H 格式) |
China National Standards scan |
English PDF |
| GB/T 7399-1987 |
Helical-scan video tape cassette system using 12.65 mm magnetic tape on type VHS VHS 型12.65 mm螺旋扫描盒式磁带录像系统 |
China National Standards scan |
English PDF |
| Find out:112Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
