Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 5019.13-2023 |
Mica-based insulation materials Part 13: High thermal conductivity glass cloth reinforced low-adhesive mica tape {译} 以云母为基的绝缘材料 第13部分：高导热性玻璃布补强少胶云母带 |
China National Standards tap |
 English PDF |
| GB 31610.6-2023 |
National food safety standards - Inspection of Sparganoma mansoni tapeworm in animal aquatic products and their products {译} 食品安全国家标准 动物性水产品及其制品中曼氏迭宫绦虫裂头蚴的检验 |
China National Standards tap |
English PDF |
| GB 1886.325-2021 |
National Food Safety Standard Food Additive Potassium Polymetaphosphate {译} 食品安全国家标准 食品添加剂 聚偏磷酸钾 |
China National Standards tap |
English PDF |
| GB 1103.1-2023 |
Cotton Part 1: Sawtoothed Fine Staple Cotton {译} 棉花 第1部分：锯齿加工细绒棉 |
China National Standards tap |
English PDF |
| GB/T 6138-2023 |
Step twist drill for drilling before tapping {译} 攻丝前钻孔用阶梯麻花钻 |
China National Standards tap |
English PDF |
| GB/T 43005-2023 |
Continuous fiberglass tape wrapped reinforced polyethylene composite pipe for water supply {译} 给水用连续玻纤带缠绕增强聚乙烯复合管 |
China National Standards tap |
English PDF |
| GB/T 20328-2023 |
R series tapered pipe thread round die {译} R系列圆锥管螺纹圆板牙 |
China National Standards tap |
English PDF |
| GB/Z 42840-2023 |
Nanotechnology Testing the potency of silver nanoparticles using muramic acid released by Staphylococcus aureus {译} 纳米技术 利用金黄色葡萄球菌释放的胞壁酸检测银纳米颗粒的效力 |
China National Standards tap |
English PDF |
| GB/T 6609.25-2023 |
Methods for chemical analysis and determination of physical properties of alumina - Part 25: Determination of loose and tapped density {译} 氧化铝化学分析方法和物理性能测定方法 第25部分：松装和振实密度的测定 |
China National Standards tap |
English PDF |
| GB/T 42909-2023 |
Conductive adhesive tape for wireless terminal equipment {译} 无线终端设备用导电胶粘带 |
China National Standards tap |
English PDF |
| GB/T 14034.1-2023 |
Hydraulic transmission connections Metal pipe couplings Part 1: 24° taper {译} 液压传动连接 金属管接头 第1部分：24°锥形 |
China National Standards tap |
English PDF |
| GB/T 20333-2023 |
Basic Dimensions and Designations of taps for Cylindrical and Conical Pipe Threads {译} 圆柱和圆锥管螺纹丝锥的基本尺寸和标志 |
China National Standards tap |
English PDF |
| GB/T 16824.1-2023 |
Hex Flange tapping Screws {译} 六角凸缘自攻螺钉 |
China National Standards tap |
English PDF |
| GB/T 15856.5-2023 |
Hex flange self-drilling self-tapping screws {译} 六角凸缘自钻自攻螺钉 |
China National Standards tap |
English PDF |
| GB/T 300-2023 |
Rolling bearings Four-row tapered roller bearings Dimensions {译} 滚动轴承 四列圆锥滚子轴承 外形尺寸 |
China National Standards tap |
English PDF |
| GB/T 299-2023 |
Rolling bearings Double row tapered roller bearings Dimensions {译} 滚动轴承 双列圆锥滚子轴承 外形尺寸 |
China National Standards tap |
English PDF |
| GB/T 273.1-2023 |
Rolling bearings - Overall scheme of dimensions - Part 1: tapered roller bearings {译} 滚动轴承 外形尺寸总方案 第1部分：圆锥滚子轴承 |
China National Standards tap |
English PDF |
| GB/T 41657-2022 |
Determination of puncture resistance of adhesive tape {译} 胶粘带抗刺穿性能的测定 |
China National Standards tap |
English PDF |
| GB/T 5019.10-2022 |
Insulating materials based on mica - Part 10: Mica tapes for fire-resistant safety cables {译} 以云母为基的绝缘材料 第10部分：耐火安全电缆用云母带 |
China National Standards tap |
English PDF |
| GB/T 4256-2022 |
Straight Shank and Morse taper Shank Reaming Drills {译} 直柄和莫氏锥柄扩孔钻 |
China National Standards tap |
English PDF |
| GB/T 14463-2022 |
Viscose staple fiber {译} 粘胶短纤维 |
China National Standards tap |
English PDF |
| GB/T 14338-2022 |
Test method for crimp properties of chemical staple fibers {译} 化学纤维 短纤维卷曲性能试验方法 |
China National Standards tap |
English PDF |
| GB/T 14337-2022 |
Test method for tensile properties of chemical staple fibers {译} 化学纤维 短纤维拉伸性能试验方法 |
China National Standards tap |
English PDF |
| GB/T 41640-2022 |
Critical current measurement Second-generation high-temperature superconducting long tape critical current and its uniformity along the length direction {译} 临界电流测量 第二代高温超导长带临界电流及其沿长度方向均匀性测量 |
China National Standards tap |
English PDF |
| GB/T 41741-2022 |
Classification and test method of attapulgite clay {译} 凹凸棒石黏土分级及测试方法 |
China National Standards tap |
English PDF |
| GB/T 20326-2021 |
Long full-diameter shank taps with recess 粗长柄机用丝锥 |
China National Standards tap |
English PDF |
| GB/T 40489-2021 |
Code of practice of chinese lacquer tapping 生漆采割技术规程 |
China National Standards tap |
English PDF |
| GB/T 40262-2021 |
Metal coating fabric—Determination of metal layer adhesive force—tape method 金属镀膜织物 金属层结合力的测定 胶带法 |
China National Standards tap |
English PDF |
| GB/T 40068-2021 |
Electrofusion welding sleeve(tape) for thermal insulation pipeline 保温管道用电热熔套（带） |
China National Standards tap |
English PDF |
| GB/T 325.6-2021 |
Packaging container—Steel drum—Part 6：tapered-opening steel drum 包装容器 钢桶 第6部分：锥形开口钢桶 |
China National Standards tap |
English PDF |
| GB/T 3883.209-2021 |
Safety of motor-operated hand-held, transportable and garden tools - Part 209: Particular requirements for hand-held tappers and threaders 手持式、可移式电动工具和园林工具的安全 第209部分：手持式攻丝机和套丝机的专用要求 |
China National Standards tap |
English PDF |
| GB/T 39762-2021 |
Textile machinery—Opener and cleaner for staple fibres preparation—Vocabulary and principles of construction 纺织机械 短纤维开松机和清棉机 术语和结构原理 |
China National Standards tap |
English PDF |
| GB/T 5162-2021 |
Metallic powders—Determination of tap density 金属粉末 振实密度的测定 |
China National Standards tap |
English PDF |
| GB/T 9142-2021 |
Specification of plastic-steel bilayer self-lubricating materials—Part 1：Running-in layer with modified PTFE tape 建筑施工机械与设备 混凝土搅拌机 |
China National Standards tap |
English PDF |
| GB/T 40826-2021 |
Test method for hand-arranging staple length of dehaired cashmere—Flatbed scanner method 分梳山羊绒手排长度试验方法 图板电子扫描仪法 |
China National Standards tap |
English PDF |
| GB/T 39142.1-2020 |
Specification of plastic-steel bilayer self-lubricating materials—Part 1：Running-in layer with modified PTFE tape 塑料－钢背二层粘接复合自润滑板材技术条件 第1部分：带改性聚四氟乙烯（PTFE）减摩层的板材 |
China National Standards tap |
English PDF |
| GB/T 39025-2020 |
Spun-dyed polyimide staple fiber 有色聚酰亚胺短纤维 |
China National Standards tap |
English PDF |
| GB 1886.4-2020 |
National food safety standard - Food additive - Sodium hexametaphosphate 食品安全国家标准 食品添加剂 六偏磷酸钠 |
China National Standards tap |
English PDF |
| GB/T 15331-2020 |
Test method for water vapor transmission rate of pressure-sensitive tapes 压敏胶粘带水蒸气透过率试验方法 |
China National Standards tap |
English PDF |
| GB/T 15330-2020 |
Test method for water penetration rate of pressure-sensitive tapes 压敏胶粘带水渗透率试验方法 |
China National Standards tap |
English PDF |
| GB/T 10230.1-2019 |
tap-changers—Part 1：Performance requirements and test methods 分接开关 第1部分：性能要求和试验方法 |
China National Standards tap |
English PDF |
| GB/T 8200-2019 |
Bisultap soluble concentrate 杀虫双可溶液剂 |
China National Standards tap |
English PDF |
| GB/T 37891.6-2019 |
Cutter arbors with parallel key and tenon drive—Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system 带平键和端键传动的铣刀杆 第6部分：带钢球拉紧系统的模块圆锥柄刀杆的尺寸和标记 |
China National Standards tap |
English PDF |
| GB/T 37891.5-2019 |
Cutter arbors with parallel key and tenon drive—Part 5:Dimensions and designation of tool holders with polygonal taper interface with flange contact surface 带平键和端键传动的铣刀杆 第5部分：带法兰接触面的多棱锥柄刀杆的尺寸和标记 |
China National Standards tap |
English PDF |
| GB/T 37891.4-2019 |
Cutter arbors with parallel key and tenon drive—Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers 带平键和端键传动的铣刀杆 第4部分：带7:24手动换刀圆锥柄刀杆的尺寸和标记 |
China National Standards tap |
English PDF |
| GB/T 37891.3-2019 |
Cutter arbors with parallel key and tenon drive—Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers 带平键和端键传动的铣刀杆 第3部分：带7:24自动换刀圆锥柄刀杆的尺寸和标记 |
China National Standards tap |
English PDF |
| GB/T 37891.2-2019 |
Cutter arbors with parallel key and tenon drive—Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface 带平键和端键传动的铣刀杆 第2部分：带法兰接触面的空心圆锥柄刀杆的尺寸和标记 |
China National Standards tap |
English PDF |
| GB/T 37888-2019 |
Sealant material in terrestrial photovoltaic(PV) modules—Pressure sensitive adhesive tape 地面光伏组件用密封材料 压敏胶粘带 |
China National Standards tap |
English PDF |
| GB/T 37587-2019 |
Technical specification for corrosion resistance of buried steel bend pipe polyethylene anti-corrosion tapes 埋地钢质弯管聚乙烯防腐带耐蚀作业技术规范 |
China National Standards tap |
English PDF |
| GB/T 31057.2-2018 |
Granular materials—Physical properties—Part 2: Determination of tap density 颗粒材料-物理性能测试-第2部分：振实密度的测量 |
China National Standards tap |
English PDF |
| GB/T 35095-2018 |
Pi tapes π尺 |
China National Standards tap |
English PDF |
| GB/T 36794-2018 |
Determination of shear adhesion failure temperature of adhesive tape 胶粘带剪切破坏温度的测定 |
China National Standards tap |
English PDF |
| GB/T 15879.5-2018 |
Mechanical standardization of semiconductor devices—Part 5: Recommendations applying to tape automated bonding(TAB) of integrated circuits 半导体器件的机械标准化 第5部分：用于集成电路载带自动焊(TAB)的推荐值 |
China National Standards tap |
English PDF |
| GB/T 34926-2017 |
Corrugated copper metallic sheath mica tape mineral insulated cables and their terminations with a rated voltage up to and including 0.6/1kV 额定电压0.6/1kV及以下云母带矿物绝缘波纹铜护套电缆及终端 |
China National Standards tap |
English PDF |
| GB/T 19812.3-2017 |
Plastic equipment for water saving irrigation—Part 3：Drip pipe and drip tape inlaid with emitters inside 塑料节水灌溉器材 第3部分：内镶式滴灌管及滴灌带 |
China National Standards tap |
English PDF |
| GB/T 19812.1-2017 |
Plastic equipment for water saving irrigation—Part 1：Drip tape with labyrinth on one side 塑料节水灌溉器材 第1部分：单翼迷宫式滴灌带 |
China National Standards tap |
English PDF |
| GB/T 34730-2017 |
Estuarine tapertail anchovy—Broodstock，fry and fingerling 刀鲚 亲鱼和苗种 |
China National Standards tap |
English PDF |
| GB/T 34712-2017 |
Determination for the flagging of adhesive tape 胶粘带起翘性的测定 |
China National Standards tap |
English PDF |
| GB/T 5019.12-2017 |
Specification for insulating materials based on mica— Part 12：Glass fabric backup epoxy dry mica tape with high porosity 以云母为基的绝缘材料 第12部分：高透气性玻璃布补强环氧少胶云母带 |
China National Standards tap |
English PDF |
| GB/T 847-2017 |
Cross-recessed raised countersunk (oval) head tapping screws 十字槽半沉头自攻螺钉 |
China National Standards tap |
English PDF |
| GB/T 5282-2017 |
Slotted pan head tapping screws 开槽盘头自攻螺钉 |
China National Standards tap |
English PDF |
| GB/T 2670.3-2017 |
Hexalobular socket raised countersunk (oval) head tapping screws 内六角花形半沉头自攻螺钉 |
China National Standards tap |
English PDF |
| GB/T 5283-2017 |
Slotted countersunk (flat) head tapping screws 开槽沉头自攻螺钉 |
China National Standards tap |
English PDF |
| GB/T 2670.2-2017 |
Hexalobular socket countersunk head tapping screws 内六角花形沉头自攻螺钉 |
China National Standards tap |
English PDF |
| GB/T 9074.18-2017 |
tapping screw and washer assemblies with plain washers 自攻螺钉和平垫圈组合件 |
China National Standards tap |
English PDF |
| GB/T 5285-2017 |
Hexagon head tapping screws 六角头自攻螺钉 |
China National Standards tap |
English PDF |
| GB/T 845-2017 |
Cross-recessed pan head tapping screws 十字槽盘头自攻螺钉 |
China National Standards tap |
English PDF |
| GB/T 5284-2017 |
Slotted raised countersunk (oval) head tapping screws 开槽半沉头自攻螺钉 |
China National Standards tap |
English PDF |
| GB/T 846-2017 |
Cross-recessed countersunk (flat) head tapping screws 十字槽沉头自攻螺钉 |
China National Standards tap |
English PDF |
| GB/T 2670.1-2017 |
Hexalobular socket pan head tapping screws 内六角花形盘头自攻螺钉 |
China National Standards tap |
English PDF |
| GB/T 3852-2017 |
tapes and dimensions for coupling bores and their connection 联轴器轴孔和联结型式与尺寸 |
China National Standards tap |
English PDF |
| GB/T 17638-2017 |
Geosynthetics—Synthetic staple fibers needlepunched nonwoven geotextiles 土工合成材料 短纤针刺非织造土工布 |
China National Standards tap |
English PDF |
| GB/T 33617-2017 |
Polyimide staple fiber 聚酰亚胺短纤维 |
China National Standards tap |
English PDF |
| GB/T 33524.1-2017 |
Modular taper interface with ball track system—Part 1: Dimensions and designation of shanks 带有钢球拉紧系统的模块圆锥接口 第1部分：柄部尺寸和标记 |
China National Standards tap |
English PDF |
| GB/T 33524.2-2017 |
Modular taper interface with ball track system—Part 2: Dimensions and designation of receivers 带有钢球拉紧系统的模块圆锥接口 第2部分：安装孔尺寸和标记 |
China National Standards tap |
English PDF |
| GB/T 1139-2017 |
Morse and metric taper reamers 莫氏圆锥和米制圆锥铰刀 |
China National Standards tap |
English PDF |
| GB/T 1132-2017 |
Machine chucking reamers with cylindrical shanks and Morse taper shanks 直柄和莫氏锥柄机用铰刀 |
China National Standards tap |
English PDF |
| GB/T 1563-2017 |
taper keys—Cross section dimensions of keyways 楔键 键槽的剖面尺寸 |
China National Standards tap |
English PDF |
| GB/T 4243-2017 |
Long fluted machine reamers with Morse taper shanks 莫氏锥柄长刃机用铰刀 |
China National Standards tap |
English PDF |
| GB/T 4247-2017 |
Machine bridge reamers with Morse taper shanks 莫氏锥柄机用桥梁铰刀 |
China National Standards tap |
English PDF |
| GB/T 14464-2017 |
Polyester staple fibre 涤纶短纤维 |
China National Standards tap |
English PDF |
| GB/T 35442-2017 |
Para-aramid staple fiber 对位芳纶短纤维 |
China National Standards tap |
English PDF |
| GB/T 33375-2016 |
Measurement for electrostatic properties of adhesive tape 胶粘带静电性能的试验方法 |
China National Standards tap |
English PDF |
| GB/T 6481-2016 |
Hollow hexagonal drill rods with taperd connection for rock drilling 凿岩用锥体连接中空六角形钎杆 |
China National Standards tap |
English PDF |
| GB/T 33332-2016 |
Test method for dynamic shear strength of adhesive tapes 胶粘带动态剪切强度的试验方法 |
China National Standards tap |
English PDF |
| GB/T 11854-2016 |
Gauges of 7:24 tapers—Inspection 7:24工具圆锥量规 检验 |
China National Standards tap |
English PDF |
| GB/T 33151-2016 |
Gauges of HSK tapers—Inspection HSK工具圆锥量规 检验 |
China National Standards tap |
English PDF |
| GB/T 32800.3-2016 |
Hand-held non-electric power tools—Safety requirements—Part 3: Drills and tappers 手持式非电类动力工具 安全要求 第3部分：钻和攻丝机 |
China National Standards tap |
English PDF |
| GB/T 32713-2016 |
Specification of artificial breeding technology of estuarine tapertail anchovy 刀鲚人工繁育技术规范 |
China National Standards tap |
English PDF |
| GB/T 32615-2016 |
Textile machinery—Cards for staple fibres spinning—Vocabulary and principles of construction 纺织机械 短纤维梳理机 术语和定义、结构原理 |
China National Standards tap |
English PDF |
| GB/T 32558-2016 |
Reduction sleeves with 7/24 external and Morse internal taper 带7:24外圆锥和莫氏内圆锥的缩柄套 |
China National Standards tap |
English PDF |
| GB/T 32557.2-2016 |
Polygonal taper interface with flange contact surface—Part 2: Dimensions and designation of receivers 带有法兰接触面的多棱锥接口 第2部分：安装孔尺寸和标记 |
China National Standards tap |
English PDF |
| GB/T 32557.1-2016 |
Polygonal taper interface with flange contact surface—Part 1: Dimensions and designation of shanks 带有法兰接触面的多棱锥接口 第1部分：柄部尺寸和标记 |
China National Standards tap |
English PDF |
| GB/T 32556.3-2016 |
Cutter arbors with tenon drive—Part 3: Dimensions of hollow taper interface with flange contact surface 带端键传动的铣刀杆 第3部分：带法兰接触面的空心锥柄的铣刀杆尺寸 |
China National Standards tap |
English PDF |
| GB/T 32556.2-2016 |
Cutter arbors with tenon drive—Part 2: Dimensions of 7:24 taper 带端键传动的铣刀杆 第2部分：带7:24锥柄的铣刀杆尺寸 |
China National Standards tap |
English PDF |
| GB/T 32556.1-2016 |
Cutter arbors with tenon drive—Part 1: Dimension of Morse taper 带端键传动的铣刀杆 第1部分：带莫氏锥柄的铣刀杆尺寸 |
China National Standards tap |
English PDF |
| GB/T 32534-2016 |
Test methods for taper screw threads 圆锥螺纹检测方法 |
China National Standards tap |
English PDF |
| GB/T 1443-2016 |
Self-holding tapers for machine tools and tool shanks 机床和工具柄用自夹圆锥 |
China National Standards tap |
English PDF |
| GB/T 3098.5-2016 |
Mechanical properties of fasteners—tapping screws 紧固件机械性能 自攻螺钉 |
China National Standards tap |
English PDF |
| GB/T 16824.2-2016 |
Hexagon flange head tapping screws 六角法兰面自攻螺钉 |
China National Standards tap |
English PDF |
| GB/T 16824.1-2016 |
Hexagon washer head tapping screws 六角凸缘自攻螺钉 |
China National Standards tap |
English PDF |
| GB/T 32370-2015 |
Determination of the length and width for adhesive tapes 胶粘带长度和宽度的测定 |
China National Standards tap |
English PDF |
| GB/T 32368-2015 |
Measurement of resistance to elevated temperature and humidity for adhesive tapes 胶粘带耐高温高湿老化的试验方法 |
China National Standards tap |
English PDF |
| GB/T 19835-2015 |
Self-regulating trace heating tape 自限温电伴热带 |
China National Standards tap |
English PDF |
| GB/T 1962.1-2015 |
Conical fittings with a 6%(Luer) taper for syringes,needles and certain other medical equipment—Part 1: General requirement 注射器、注射针及其他医疗器械6%（鲁尔）圆锥接头 第1部分：通用要求 |
China National Standards tap |
English PDF |
| GB/T 32220-2015 |
taper bush—types, size and basic parameters 锥套 型式、尺寸和基本参数 |
China National Standards tap |
English PDF |
| GB 1886.4-2015 |
National Food Safety Standard-Food Additives-Hexametaphosphate 食品安全国家标准 食品添加剂 六偏磷酸钠 |
China National Standards tap |
English PDF |
| GB/T 31889-2015 |
Meta-aramid staple fiber 间位芳纶短纤维 |
China National Standards tap |
English PDF |
| GB/T 14342-2015 |
Man-made fiber—Test method for specific resistance of staple fibers 化学纤维 短纤维比电阻试验方法 |
China National Standards tap |
English PDF |
| GB/T 31559-2015 |
Collets for tool holders with taper ratio 1:10—Collets，holders，nuts 工具柄用1:10锥柄的弹簧夹头 弹簧夹头，锥柄座，螺母 |
China National Standards tap |
English PDF |
| GB/T 21877-2015 |
Dyestuffs and intermediate of dyes—Determination of tapping density 染料及染料中间体 堆积密度的测定 |
China National Standards tap |
English PDF |
| GB/T 30789.6-2015 |
Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects,and of intensity of uniform changes in appearance—Part 6: Assessment of degree of chalking by tape method 色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第6部分：胶带法评定粉化等级 |
China National Standards tap |
English PDF |
| GB/T 297-2015 |
Rolling bearings—tapered roller bearings—Boundary dimensions 滚动轴承 圆锥滚子轴承 外形尺寸 |
China National Standards tap |
English PDF |
| GB/T 30651-2014 |
Test method of flowability of petrolatum tape at high temperature 矿脂防蚀带耐高温流动性检测方法 |
China National Standards tap |
English PDF |
| GB/T 30650-2014 |
Test method of operability of petrolatum tape at low temperature 矿脂防蚀带低温可操作性检测方法 |
China National Standards tap |
English PDF |
| GB/T 31125-2014 |
Test method of adhesive tapes—Loop tack 胶粘带初粘性试验方法 环形法 |
China National Standards tap |
English PDF |
| GB/T 7125-2014 |
Test method for thickness of adhesive tapes 胶粘带厚度的试验方法 |
China National Standards tap |
English PDF |
| GB/T 30788-2014 |
Specification of cold-applied petrolatum tape coatings for steel pipelines 钢制管道外部缠绕防腐蚀冷缠矿脂带作业规范 |
China National Standards tap |
English PDF |
| GB/T 30776-2014 |
Measurement of break strength and elongate at break for adhesive tapes 胶粘带拉伸强度与断裂伸长率的试验方法 |
China National Standards tap |
English PDF |
| GB/T 30775-2014 |
Pressure sensitive adhesive tapes of PE protective film 聚乙烯（PE）保护膜压敏胶粘带 |
China National Standards tap |
English PDF |
| GB/T 2792-2014 |
Measurement of peel adhesion properties for adhesive tapes 胶粘带剥离强度的试验方法 |
China National Standards tap |
English PDF |
| GB/T 3098.21-2014 |
Mechanical properties of fasteners—Stainless steel tapping screws 紧固件机械性能 不锈钢自攻螺钉 |
China National Standards tap |
English PDF |
| GB/T 19449.4-2013 |
Hollow taper interface with flange contact surface―Part 4: Dimensions of receivers for stationary tools 带有法兰接触面的空心圆锥接口 第4部分：用于非旋转类工具 安装孔的尺寸 |
China National Standards tap |
English PDF |
| GB/T 19449.3-2013 |
Hollow taper interface with flange contact surface― Part 3: Dimensions of shanks for stationary tools 带有法兰接触面的空心圆锥接口 第3部分：用于非旋转类工具 柄的尺寸 |
China National Standards tap |
English PDF |
| GB/T 10944.5-2013 |
Tool shanks with 7/24 taper for automatic tool changers―Part 5: Technical specifications of Retention knobs 自动换刀7:24圆锥工具柄 第5部分：拉钉的技术条件 |
China National Standards tap |
English PDF |
| GB/T 10944.4-2013 |
Tool shanks with 7/24 taper for automatic tool changers—Part 4: Technical specifications for shanks 自动换刀7:24圆锥工具柄 第4部分：柄的技术条件 |
China National Standards tap |
English PDF |
| GB/T 10944.3-2013 |
Tool shanks with 7/24 taper for automatic tool changers―Part 3:Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF,JD and JF 自动换刀7:24圆锥工具柄 第3部分：AC、AD、AF、UC、UD、UF、JD 和 JF型拉钉 |
China National Standards tap |
English PDF |
| GB/T 10944.2-2013 |
Tool shanks with 7/24 taper for automatic tool changers—Part 2：Dimensions and designation of shanks of forms J，JD and JF 自动换刀7:24圆锥工具柄 第2部分：J、JD和JF型柄的尺寸和标记 |
China National Standards tap |
English PDF |
| GB/T 10944.1-2013 |
Tool shanks with 7/24 taper for automatic tool changers―Part 1：Dimensions and designation of shanks of forms A，AD，AF，U，UD and UF 自动换刀7:24圆锥工具柄 第1部分：A、AD、AF、U、UD和UF型柄的尺寸和标记 |
China National Standards tap |
English PDF |
| GB/T 30125-2013 |
Bamboo-charcoal polyester staple fiber 竹炭涤纶短纤维 |
China National Standards tap |
English PDF |
| GB/T 30101-2013 |
Polyvinyl alcohol water-soluble staple fiber 聚乙烯醇水溶短纤维 |
China National Standards tap |
English PDF |
| GB 30003-2013 |
Toothbrushes with tapered filament 磨尖丝牙刷 |
China National Standards tap |
English PDF |
| GB/T 29593-2013 |
Kraft paper adhesive tape for surface protection 表面保护用牛皮纸胶粘带 |
China National Standards tap |
English PDF |
| GB/T 13187-2012 |
Magnetic tape sound recording and reproducing systems - General conditions and requirements 磁带录放音系统 一般条件与要求 |
China National Standards tap |
English PDF |
| GB 29225-2012 |
National Food Safety Standard - Food Additive - Attapulgite Clay 食品安全国家标准 食品添加剂 凹凸棒粘土 |
China National Standards tap |
English PDF |
| GB 3883.9-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for tappers 手持式电动工具的安全 第2部分：攻丝机的专用要求 |
China National Standards tap |
English PDF |
| GB/T 28786-2012 |
Vacuum technology - Methods of bonding strength measurement for vacuum coating film - Measuring adhesion by tape test 真空技术 真空镀膜层结合强度测量方法 胶带粘贴法 |
China National Standards tap |
English PDF |
| GB/T 28691-2012 |
High precision trapezoidal thread broaching tap 高精度梯形螺纹拉削丝锥 |
China National Standards tap |
English PDF |
| GB/T 14001-2012 |
Time and control code for SDTV video tape recording 标准清晰度电视磁带录像用时间和控制码 |
China National Standards tap |
English PDF |
| GB/T 28257-2012 |
long shank nut taps 长柄螺母丝锥 |
China National Standards tap |
English PDF |
| GB/T 28256-2012 |
Trapezoidal taps 梯形螺纹丝锥 |
China National Standards tap |
English PDF |
| GB/T 28255-2012 |
taps with the hollow interior to deposit the swarf 内容屑丝锥 |
China National Standards tap |
English PDF |
| GB/T 28254-2012 |
Spiral pointed taps 螺尖丝锥 |
China National Standards tap |
English PDF |
| GB/T 28253-2012 |
Thread forming tap 挤压丝锥 |
China National Standards tap |
English PDF |
| GB/T 28162.3-2011 |
Packaging of components for automatic handing - Part 3: Packaging of surface mount components on continuous tapes 自动操作用元器件的包装 第3部分：表面安装元器件在连续带上的包装 |
China National Standards tap |
English PDF |
| GB/T 28055-2011 |
Technical standard for hot tapping and plugging on steel pipeline 钢制管道带压封堵技术规范 |
China National Standards tap |
English PDF |
| GB/T 27786-2011 |
Laboratory efficacy test methods and criterions of public health equipment - Sticky tape or paper for flies 卫生杀虫器械实验室效果测定及评价 粘蝇带（纸） |
China National Standards tap |
English PDF |
| GB/T 10878-2011 |
Special taps of taper threads for gas cylinders 气瓶锥螺纹丝锥 |
China National Standards tap |
English PDF |
| GB/T 9384-2011 |
Environmental testing requirements and methods for broadcasting receivers,broadcasting television receivers,tape recorders and audio amplifiers 广播收音机、广播电视接收机、磁带录音机、声频功率放大器(扩音机)的环境试验要求和试验方法 |
China National Standards tap |
English PDF |
| GB/T 2018-2011 |
Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape 磁带录音机测量方法 |
China National Standards tap |
English PDF |
| GB 28153-2011 |
Thiosultap-monosodium water soluble powders 杀虫单可溶粉剂 |
China National Standards tap |
English PDF |
| GB 28128-2011 |
Thiosultap-monosodium technical material 杀虫单原药 |
China National Standards tap |
English PDF |
| GB/T 273.1-2011 |
Rolling bearings-Boundary dimensions general plan-Part 1:tapered roller bearings 滚动轴承 外形尺寸总方案 第1部分：圆锥滚子轴承 |
China National Standards tap |
English PDF |
| GB/T 26187-2010 |
Crepe paper for masking tape 美纹纸 |
China National Standards tap |
English PDF |
| GB/T 25767-2010 |
Rolling bearings - tapered rollers 滚动轴承 圆锥滚子 |
China National Standards tap |
English PDF |
| GB/T 25297.2-2010 |
Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes 电阻点焊 电极接头，外锥度1:10 第2部分：末端插入式圆柱柄配合 |
China National Standards tap |
English PDF |
| GB/T 6117.3-2010 |
End mills - Part 3: Milling cutters with 7：24 taper shanks 立铣刀 第3部分：7:24锥柄立铣刀 |
China National Standards tap |
English PDF |
| GB/T 6117.2-2010 |
End mills - Part 2: Milling cutters with morse taper shanks 立铣刀 第2部分：莫氏锥柄立铣刀 |
China National Standards tap |
English PDF |
| GB 4789.10-2010 |
National Food Safety Standard-Microbiological examination of foods - Examination of Staphylococcus aureus 食品安全国家标准 食品微生物学检验 金黄色葡萄球菌检验 |
China National Standards tap |
English PDF |
| GB/T 24717-2009 |
Preformed pavement marking tape 道路预成形标线带 |
China National Standards tap |
English PDF |
| GB/T 24610.3-2009 |
Rolling bearings - Measuring methods for vibration - Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface 滚动轴承 振动测量方法 第3部分：具有圆柱孔和圆柱外表面的调心滚子轴承和圆锥滚子轴承 |
China National Standards tap |
English PDF |
| GB/T 24371-2009 |
Spinning preparatory, spinning and doubling (twisting) machinery - Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64 纺纱准备、纺纱和并（捻）机械 环锭纺、并、捻锭子用筒管 锥度1∶38和1∶64 |
China National Standards tap |
English PDF |
| GB/T 24349.3-2009 |
Textile machinery and accessories - Cylindrical tubes - Part 3: Dimensions, tolerances and designation of tubes for tape yarns 纺织机械与附件 圆柱形筒管 第3部分：扁丝用筒管的尺寸、偏差和标记 |
China National Standards tap |
English PDF |
| GB/T 5019.9-2009 |
Insulating materials based on mica - Part 9: Polyester film mica paper with an epoxy resin binder for single conductor taping 以云母为基的绝缘材料 第9部分：单根导线包绕用环氧树脂粘合聚酯薄膜云母带 |
China National Standards tap |
English PDF |
| GB/T 5019.10-2009 |
Specification for insulating materials based on mica - Part 10: Mica paper tapes for flame-resistant security cables 以云母为基的绝缘材料 第10部分：耐火安全电缆用云母带 |
China National Standards tap |
English PDF |
| GB/T 23743-2009 |
Microbiological examination of the enumeration of coagulase-positive staphylococci in feeds - Technique using Baird-Parker agar medium 饲料中凝固酶阳性葡萄球菌的微生物学检验 Baird-parker琼脂培养基计数法 |
China National Standards tap |
English PDF |
| GB/T 23660-2009 |
Building structure crack split-stopping tape 建筑结构裂缝止裂带 |
China National Standards tap |
English PDF |
| GB/T 23575-2009 |
Metal cutting machine tools - Check and evaluation for taper surface by miniating 金属切削机床 圆锥表面涂色法检验及评定 |
China National Standards tap |
English PDF |
| GB/T 23448-2009 |
Flexible hose for sanitary tapware 卫生洁具 软管 |
China National Standards tap |
English PDF |
| GB/T 23311-2009 |
Aromatic polyimide tape wrapped round copper wire, class 240 240级芳族聚酰亚胺薄膜绕包铜圆线 |
China National Standards tap |
English PDF |
| GB/T 23310-2009 |
Aromatic polyimide tape wrapped rectangular copper wire，class 240 240级芳族聚酰亚胺薄膜绕包铜扁线 |
China National Standards tap |
English PDF |
| GB/T 13217.7-2009 |
Test method for adhesion to substrate of liquid ink with tape 液体油墨附着牢度检验方法 |
China National Standards tap |
English PDF |
| GB/T 13288.5-2009 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分：表面粗糙度的测定方法 复制带法 |
China National Standards tap |
English PDF |
| GB/T 22823-2008 |
Adhesive tape base paper 胶带原纸 |
China National Standards tap |
English PDF |
| GB 22613-2008 |
Cartap hydrochloride water soluble powders 杀螟丹可溶粉剂 |
China National Standards tap |
English PDF |
| GB 22612-2008 |
Cartap hydrochloride technical 杀螟丹原药 |
China National Standards tap |
English PDF |
| GB/T 1438.4-2008 |
taper shank twist drills - Part 4: The types and dimensions extra-long for Morse taper shank twist drills 锥柄麻花钻 第4部分：莫氏锥柄超长麻花钻的型式和尺寸 |
China National Standards tap |
English PDF |
| GB/T 1438.3-2008 |
taper shank twist drills - Part 3: The types and dimensions for lengthened Morse taper shank twist drills 锥柄麻花钻 第3部分：莫氏锥柄加长麻花钻的型式和尺寸 |
China National Standards tap |
English PDF |
| GB/T 1438.2-2008 |
taper shank twist drills - Part 2: The types and dimensions for long Morse taper shank twist drills 锥柄麻花钻 第2部分：莫氏锥柄长麻花钻的型式和尺寸 |
China National Standards tap |
English PDF |
| GB/T 1438.1-2008 |
taper shank twist drills - Part 1: The types and dimensions for Morse taper shank twist drills 锥柄麻花钻 第1部分：莫氏锥柄麻花钻的型式和尺寸 |
China National Standards tap |
English PDF |
| GB/T 22471.2-2008 |
Resin impregnated glass banding tape for electrical insulation - Part 2: Test methods 电气绝缘用树脂浸渍玻璃纤维网状无纬绑扎带 第2部分：试验方法 |
China National Standards tap |
English PDF |
| GB/T 18842-2008 |
taper cylindrical involute splines 圆锥直齿渐开线花键 |
China National Standards tap |
English PDF |
| GB/T 11956-2008 |
High speed duplicate audio tape 高速复制录音磁带 |
China National Standards tap |
English PDF |
| GB/T 22378-2008 |
Pressure sensitive adhesives tapes of BOPP for general purpose 通用型双向拉伸聚丙烯膜压敏胶粘带 |
China National Standards tap |
English PDF |
| GB/T 13807.1-2008 |
Connections with waisted stud - tape classification 腰状杆螺柱连接副 型式分类 |
China National Standards tap |
English PDF |
| GB/T 16257-2008 |
Textile fibres - Test method for length and length distribution of staple fibres - Measurement of single fibres 纺织纤维 短纤维长度和长度分布的测定 单纤维测量法 |
China National Standards tap |
English PDF |
| GB/T 16602-2008 |
Acrylic staple and tow 腈纶短纤维和丝束 |
China National Standards tap |
English PDF |
| GB/T 14464-2008 |
Polyester staple fibre 涤纶短纤维 |
China National Standards tap |
English PDF |
| GB/T 14463-2008 |
Viscose staple fiber 粘胶短纤维 |
China National Standards tap |
English PDF |
| GB/T 22091.1-2008 |
Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads - Part 1:Verification of parallel internal and taper external threads 55°密封管螺纹量规 第1部分：用于检验圆柱内螺纹与圆锥外螺纹 |
China National Standards tap |
English PDF |
| GB/T 14339-2008 |
Testing method for defect of man-made staple fibres 化学纤维 短纤维疵点试验方法 |
China National Standards tap |
English PDF |
| GB/T 14338-2008 |
Testing method for crimping performance of man-made staple fibres 化学纤维 短纤维卷曲性能试验方法 |
China National Standards tap |
English PDF |
| GB/T 14337-2008 |
Testing method for tensile properties of man-made staple fibres 化学纤维 短纤维拉伸性能试验方法 |
China National Standards tap |
English PDF |
| GB/T 14336-2008 |
Testing method for length of man-made staple fibres 化学纤维 短纤维长度试验方法 |
China National Standards tap |
English PDF |
| GB/T 14335-2008 |
Testing method for linear density of man-made staple fibres 化学纤维 短纤维线密度试验方法 |
China National Standards tap |
English PDF |
| GB/T 7574-2008 |
Information processing - File structure and labeling of magnetic tapes for information interchange 信息处理 信息交换用磁带的文卷结构和标号 |
China National Standards tap |
English PDF |
| GB/T 967-2008 |
Nut taps 螺母丝锥 |
China National Standards tap |
English PDF |
| GB/T 3506-2008 |
Machine taps with helical flutes 螺旋槽丝锥 |
China National Standards tap |
English PDF |
| GB/T 16456.2-2008 |
End mills with brazed helical tips - Part 2: Dimensions of end mills with 7:24 taper shank 硬质合金螺旋齿立铣刀 第2部分：7:24 锥柄立铣刀 型式和尺寸 |
China National Standards tap |
English PDF |
| GB/T 2861.8-2008 |
Guide unit for stamping dies - Part 8: Guide pillars with taper lead for ball-bearing 冲模导向装置 第8部分：滚动导向可卸导柱 |
China National Standards tap |
English PDF |
| Find out:383Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
