China National Standards

China thickness GB Standards List


  •  China "thickness" GB Standards List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 13761.1-2022 Geosynthetics - Determination of thickness under specified pressure - Part 1: single layer products {译} {自}
    土工合成材料 规定压力下厚度的测定 第1部分:单层产品
    China National Standards
    thickness

    English PDF
    GB/T 40414-2021 Determination of thickness for floating-floor thermal insulating products
    浮筑地面用绝热制品厚度的测量
    China GB-National Standards
    thickness

    English PDF
    GB/T 40279-2021 Test method for thickness of films on silicon wafer surface—Optical reflection method
    硅片表面薄膜厚度的测试 光学反射法
    China GB-National Standards
    thickness

    English PDF
    GB/T 11344-2021 Non-destructive testing—Ultrasonic thickness measurement
    无损检测 超声测厚
    China GB-National Standards
    thickness

    English PDF
    GB/T 22889-2021 Leather—Physical and mechanical tests—Determination of surface coating thickness
    皮革 物理和机械试验 表面涂层厚度的测定
    China GB-National Standards
    thickness

    English PDF
    GB/T 40066-2021 Nanotechnologies—thickness measurement of graphene oxide—Atomic Force Microscopy (AFM)
    纳米技术 氧化石墨烯厚度测量 原子力显微镜法
    China GB-National Standards
    thickness

    English PDF
    GB/T 40128-2021 Surface chemical analysis—Atomic force microscopy—Test method for thickness of the two-dimensional layered molybdenum disulfide nanosheets
    表面化学分析 原子力显微术 二硫化钼片层材料厚度测量方法
    China GB-National Standards
    thickness

    English PDF
    GB/T 40332-2021 Non-destructive testing—Ultrasonic testing—Characterization and verification of ultrasonic thickness measuring equipment
    无损检测 超声检测 超声测厚仪性能特征和测试方法
    China GB-National Standards
    thickness

    English PDF
    GB/T 18329.4-2021 Plain bearings—Metallic multilayer plain bearings—Part 4:Non-destructive ultrasonic transmission testing of bond of thickness greater than or equal to 0.3 mm
    滑动轴承 多层金属滑动轴承 第4部分: 合金厚度≥0.3mm的结合质量超声穿透无损检测
    China GB-National Standards
    thickness

    English PDF
    GB/T 7308.2-2021 Plain bearings—Thin-walled half bearings with or without flange—Part 2:Measurement of wall thickness and flange thickness
    滑动轴承 有法兰或无法兰薄壁轴瓦 第2部分:轴瓦壁厚和法兰厚度测量
    China GB-National Standards
    thickness

    English PDF
    GB/T 20724-2021 Microbeam analysis—Method of thickness measurement for thin crystals by convergent beam electron diffraction
    微束分析 薄晶体厚度的会聚束电子衍射测定方法
    China GB-National Standards
    thickness

    English PDF
    GB/T 40913-2021 Method for the determination of the hot-end coating thickness of glass bottle
    玻璃瓶罐热端涂层厚度的测定方法
    China GB-National Standards
    thickness

    English PDF
    GB/T 15717-2021 Test method for vacuum-deposited metal thickness—Electric resistance method
    真空金属镀层厚度测试方法 电阻法
    China GB-National Standards
    thickness

    English PDF
    GB/T 40730-2021 Non-destructive testing -- Measuring thickness by electromagnetic ultrasonic pulse-echo
    无损检测 电磁超声脉冲回波式测厚方法
    China GB-National Standards
    thickness

    English PDF
    GB/T 24328.2-2020 Tissue paper and tissue products—Part 2: Determination of thickness, bulking thickness and apparent bulk density and bulk
    卫生纸及其制品 第2部分: 厚度、层积厚度、表观层积紧度和松厚度的测定
    China GB-National Standards
    thickness

    English PDF
    GB/T 38882-2020 Non-destructive testing—Testing method for wall-thickness loss of ferromagnetic tubes using magnetic flux leakage
    无损检测 铁磁性管件壁厚变化漏磁检测方法
    China GB-National Standards
    thickness

    English PDF
    GB/T 38783-2020 Method of coating thickness determination for precious metal composites by scanning electron microscope
    贵金属复合材料覆层厚度的扫描电镜测定方法
    China GB-National Standards
    thickness

    English PDF
    GB/T 38518-2020 Measurement of coating thickness on flexible film substrate
    柔性薄膜基体上涂层厚度的测量方法
    China GB-National Standards
    thickness

    English PDF
    GB/T 37768-2019 General matching specification for fully-mechanized mining face in medium-thickness coal seam
    中厚煤层综采工作面总体配套技术条件
    China National Standards
    thickness

    English PDF
    GB/T 37361-2019 Determination of the film thickness—Ultrasonic thickness gauge method
    漆膜厚度的测定 超声波测厚仪法
    China National Standards
    thickness

    English PDF
    GB/T 37158-2018 Non-destructive testing—Test method for measuring the maximum detectable steel thickness by industrial computed tomography(CT)
    无损检测-工业计算机层析成像(CT)检测最大可检测钢厚度测试方法
    China National Standards
    thickness

    English PDF
    GB/T 37122-2018 Non-destructive testing—Phantom of maximum detectable steel thickness for industrial computed tomography(CT)
    无损检测-工业计算机层析成像(CT)-检测用最大可检测钢厚度测试卡
    China National Standards
    thickness

    English PDF
    GB/T 36969-2018 Nanotechnology—Method for the measurement of the nanofilm-thickness by atomic force microscopy
    纳米技术-原子力显微术测定纳米薄膜厚度的方法
    China National Standards
    thickness

    English PDF
    GB/T 36053-2018 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry—Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
    X射线反射法测量薄膜的厚度、密度和界面宽度 仪器要求、准直和定位、数据采集、数据分析和报告
    China National Standards
    thickness

    English PDF
    GB/T 3690-2017 Textile conveyor belts—Full thickness tensile strength,elongation at break and elongation at the reference load—Test method
    织物芯输送带 全厚度拉伸强度、拉断伸长率和参考力伸长率 试验方法
    China National Standards
    thickness

    English PDF
    GB/T 34407-2017 Test method for the wall thickness of plastic pipes by ultrasonic
    塑料管道壁厚超声波检测方法
    China National Standards
    thickness

    English PDF
    GB/T 34190-2017 Surface coating weight (thickness) of electrical steel—X-ray spectrometric method
    电工钢表面涂层的重量(厚度) X射线光谱测试方法
    China National Standards
    thickness

    English PDF
    GB/T 33888-2017 Non-destructive testing instruments—Characterization and verification of ultrasonic thickness measuring equipment
    无损检测仪器 超声测厚仪特性与验证
    China National Standards
    thickness

    English PDF
    GB/T 33965-2017 Metallic materials—Tensile testing—Determination of thickness reduction ratio for rectangular specimen
    金属材料 拉伸试验 矩形试样减薄率的测定
    China National Standards
    thickness

    English PDF
    GB/T 33826-2017 Measurement of nanofilm thickness on glass substrate—Profilometric method
    玻璃衬底上纳米薄膜厚度测量 触针式轮廓仪法
    China National Standards
    thickness

    English PDF
    GB/T 33431-2016 Guide for bell mouth thickness design
    锚唇厚度设计指南
    China National Standards
    thickness

    English PDF
    GB/T 33399-2016 Optical functional films—Polyethylene terephthalate(PET) film—Determination of thickness
    光学功能薄膜 聚对苯二甲酸乙二醇酯(PET)薄膜 厚度测定方法
    China National Standards
    thickness

    English PDF
    GB/T 22638.1-2016 Test methods for aluminium and aluminium alloy foils—Part 1: Determination of thickness
    铝箔试验方法 第1部分: 厚度的测定
    China National Standards
    thickness

    English PDF
    GB/T 33051-2016 Optical functional films—Superficial hardening film—Determination of thickness of hardening coating
    光学功能薄膜 表面硬化薄膜 硬化层厚度测定方法
    China National Standards
    thickness

    English PDF
    GB/T 32552-2016 Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
    无缝和焊接钢管(埋弧焊除外)的自动全圆周超声厚度检测
    China National Standards
    thickness

    English PDF
    GB/T 32552-2016 Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
    无缝和焊接钢管(埋弧焊除外)的自动全圆周超声厚度检测
    China GB-National Standards
    thickness

    English PDF
    GB/T 32331-2015 Conveyor belts with a textile carcass—Total belt thickness and thickness of constitutive elements—Test methods
    织物芯输送带 带总厚度和各层厚度 试验方法
    China National Standards
    thickness

    English PDF
    GB/T 31925-2015 Ultrasonic test methods of heavy wall thickness seamless steel pipes and tubes
    厚壁无缝钢管超声波检验方法
    China National Standards
    thickness

    English PDF
    GB/T 31563-2015 Metallic coatings—Measurement of coating thickness—Scanning electron microscope method
    金属覆盖层 厚度测量 扫描电镜法
    China National Standards
    thickness

    English PDF
    GB/T 31554-2015 Non-magnetic metallic coatings on metallic and non-metallic basismaterials—Measurement of coating thickness—Phase-sensitive eddy-current method
    金属和非金属基体上非磁性金属覆盖层 覆盖层厚度测量 相敏涡流法
    China National Standards
    thickness

    English PDF
    GB/T 7991.5-2014 Test method of viterous and porcelain enamels—Part 5:Determination of thickness by electromagnetic mothod
    搪玻璃层试验方法 第5部分:用电磁法测量厚度
    China National Standards
    thickness

    English PDF
    GB/T 31225-2014 Test method for the thickness of silicon oxide on Si substrate by ellipsometer
    椭圆偏振仪测量硅表面上二氧化硅薄层厚度的方法
    China National Standards
    thickness

    English PDF
    GB/T 30857-2014 Standard test method for thickness and thickness variation on sapphire substrates
    蓝宝石衬底片厚度及厚度变化测试方法
    China National Standards
    thickness

    English PDF
    GB/T 30869-2014 Test method for thickness and total thickness variation of silicon wafers for solar cell
    太阳能电池用硅片厚度及总厚度变化测试方法
    China National Standards
    thickness

    English PDF
    GB/T 30867-2014 Test method for measuring thickness and total thickness variation of monocrystalline silicon carbide wafers
    碳化硅单晶片厚度和总厚度变化测试方法
    China National Standards
    thickness

    English PDF
    GB/T 7125-2014 Test method for thickness of adhesive tapes
    胶粘带厚度的试验方法
    China National Standards
    thickness

    English PDF
    GB/T 30207-2013 Aerospace―Tubing―Outside diameters and thickness―Metric dimentions
    航空航天 管子 外径和壁厚 米制尺寸
    China National Standards
    thickness

    English PDF
    GB 30460-2013 Safety of woodworking machines―One side thickness planing machines
    木工机床安全 单面压刨床
    China National Standards
    thickness

    English PDF
    GB/T 5753-2013 Steel cord conveyor belts―Methods for the determination of total thickness and cover thickness
    钢丝绳芯输送带 总厚度和覆盖层厚度的测定方法
    China National Standards
    thickness

    English PDF
    GB/T 7689.1-2013 Reinforcements - Test method for woven fabrics - Part 1:Determination of thickness
    增强材料 机织物试验方法 第1部分:厚度的测定
    China National Standards
    thickness

    English PDF
    GB/T 4893.5-2013 Test of surface coatings of furniture - Part 5: Determination of thickness
    家具表面漆膜理化性能试验 第5部分:厚度测定法
    China National Standards
    thickness

    English PDF
    GB/T 6006.3-2013 Test method for glass mats - Part 3:Determination of thickness
    玻璃纤维毡试验方法 第3部分:厚度的测定
    China National Standards
    thickness

    English PDF
    GB/T 29507-2013 Test method for measuring flatness, thickness and total thickness variation on silicon wafers by automated non-contact scanning
    硅片平整度、厚度及总厚度变化测试 自动非接触扫描法
    China National Standards
    thickness

    English PDF
    GB/T 11374-2012 Thermal spraying coating - Nondestructive methods for measurement of thickness
    热喷涂涂层厚度的无损测量方法
    China National Standards
    thickness

    English PDF
    GB/T 28122-2011 Polyvinyl alcohol (PVA) films for liquid crystal display(LCD)-Determination of thickness
    液晶显示器(LCD)用聚乙烯醇(PVA)膜 厚度测定方法
    China National Standards
    thickness

    English PDF
    GB/T 12613.7-2011 Plain bearings - Wrapped bushes - Part 7:Measurement of wall thickness of thin-walled bushes
    滑动轴承 卷制轴套 第7部分:薄壁轴套壁厚测量
    China National Standards
    thickness

    English PDF
    GB 26640-2011 Specification for minimal thickness of the shell of valves
    阀门壳体最小壁厚尺寸要求规范
    China National Standards
    thickness

    English PDF
    GB/T 14847-2010 Test mothod for thickness of lightly doped silicon epitaxial layers on heavily doped silicon substrates by infrared reflectance
    重掺杂衬底上轻掺杂硅外延层厚度的红外反射测量方法
    China National Standards
    thickness

    English PDF
    GB/T 5313-2010 Steel plates with through-thickness characteristics
    厚度方向性能钢板
    China National Standards
    thickness

    English PDF
    GB/T 25414-2010 thickness limit and test method of mulch film for cotton planting
    棉花种植用地膜厚度限值及测定
    China National Standards
    thickness

    English PDF
    GB/T 25451-2010 PHWR fuel element coating-measurement of thickness-beta backscatter method
    重水堆核电厂燃料元件涂层厚度测量β射线背散射法
    China National Standards
    thickness

    English PDF
    GB/T 25188-2010 thickness measurements for ultrathin silicon oxide layers on silicon wafers X-ray photoelectron spectroscopy
    硅晶片表面超薄氧化硅层厚度的测量 X射线光电子能谱法
    China National Standards
    thickness

    English PDF
    GB/T 25276-2010 Triacetyl cellulose (TAC) films for liquid crystal display(LCD)- Determination of thickness
    液晶显示器(LCD)用三醋酸纤维素酯(TAC)膜 厚度测定方法
    China National Standards
    thickness

    English PDF
    GB/T 6618-2009 Test method for thickness and total thickness variation of silicon slices
    硅片厚度和总厚度变化测试方法
    China National Standards
    thickness

    English PDF
    GB/T 24328.2-2009 Tissue paper and tissue products - Part 2: Determination of thickness,bulking thickness and apparent bulk density
    卫生纸及其制品 第2部分:厚度、层积厚度和表观密度的测定
    China National Standards
    thickness

    English PDF
    GB/T 24218.2-2009 Textiles - Test methods for nonwovens - Part 2: Determination of thickness
    纺织品 非织造布试验方法 第2部分:厚度的测定
    China National Standards
    thickness

    English PDF
    GB/T 13761.1-2009 Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers
    土工合成材料 规定压力下厚度的测定 第1部分:单层产品厚度的测定方法
    China National Standards
    thickness

    English PDF
    GB/T 23886-2009 Determination of nacre thickness - Optical coherence tomography
    珍珠珠层厚度测定方法 光学相干层析法
    China National Standards
    thickness

    English PDF
    GB/T 3690-2009 Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method
    织物芯输送带 全厚度拉伸强度、拉断伸长率和参考力伸长率 试验方法
    China National Standards
    thickness

    English PDF
    GB 13960.4-2009 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for planers and thicknessers
    可移式电动工具的安全 第二部分:平刨和厚度刨的专用要求
    China National Standards
    thickness

    English PDF
    GB/T 23285-2009 Micrographics - Aperture cards - Method of measuring thickness of buildup area
    缩微摄影技术 开窗卡增厚区厚度的测量方法
    China National Standards
    thickness

    English PDF
    GB/T 22789.1-2008 Plastics - Unplasticized poly(vinyl chloride)sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm
    硬质聚氯乙烯板材 分类、尺寸和性能 第1部分:厚度1mm以上板材
    China National Standards
    thickness

    English PDF
    GB/T 22889-2008 Leather - Physical and mechanical tests - Determination of surface coating thickness
    皮革 物理和机械试验 表面涂层厚度的测定
    China National Standards
    thickness

    English PDF
    GB/T 22638.1-2008 Test methods for aluminium and aluminium alloy foils - Part 1: Determination of thickness by gravimetric method
    铝箔试验方法 第1部分:厚度的测定 重量法
    China National Standards
    thickness

    English PDF
    GB/T 22520-2008 Dial thickness gauges
    厚度指示表
    China National Standards
    thickness

    English PDF
    GB/T 11344-2008 Non-destructive testing - Practice for measuring thickness by ultrasonic pulse-echo contact method
    无损检测 接触式超声脉冲回波法测厚方法
    China National Standards
    thickness

    English PDF
    GB/T 15636-2008 thickness gauges utilizing ionizing radiation
    电离辐射厚度计
    China National Standards
    thickness

    English PDF
    GB/T 2951.11-2008 Common test methods for insulating and sheathing materials of electric and optical cables - Part 11:Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties
    电缆和光缆绝缘和护套材料通用试验方法 第11部分:通用试验方法 厚度和外形尺寸测量 机械性能试验
    China National Standards
    thickness

    English PDF
    GB/T 13452.2-2008 Paints and varnishes - Determination of film thickness
    色漆和清漆 漆膜厚度的测定
    China National Standards
    thickness

    English PDF
    GB/T 14385-2008 Woodworking machines - thickness planing machines with rotary cutterblock for one-side dressing - Nomenclature and acceptance conditions
    木工机床 单面压刨床 术语和精度
    China National Standards
    thickness

    English PDF
    GB/T 14386-2008 Woodworking machines - Surface planing and thicknessing machines - Nomenclature and acceptance conditions
    木工机床 平压两用刨床 术语和精度
    China National Standards
    thickness

    English PDF
    GB/Z 18620.2-2008 Cylindrical gears - Code of inspection practice - Part 2: Inspetion related to radial composite deviations,runout, tooth thickness and backlash
    圆柱齿轮 检验实施规范 第2部分: 径向综合偏差、径向跳动、齿厚和侧隙的检验
    China National Standards
    thickness

    English PDF
    GB/T 328.5-2007 Test methods for building sheets for waterproofing - Part 5: Plastic and rubber sheets for waterproofing-thickness and mass per unit area
    建筑防水卷材试验方法 第5部分:高分子防水卷材 厚度、单位面积质量
    China National Standards
    thickness

    English PDF
    GB/T 328.4-2007 Test methods for building sheets for waterproofing - Part 4: Bitumen sheets for waterproofing-thickness and mass per unit area
    建筑防水卷材试验方法 第4部分:沥青防水卷材 厚度、单位面积质量
    China National Standards
    thickness

    English PDF
    GB/T 20724-2006 Method of thickness measurement for thin crystal by convergent beam electron diffraction
    薄晶体厚度的会聚束电子衍射测定方法
    China National Standards
    thickness

    English PDF
    GB/T 8758-2006 Measuring thickness of epitaxial layers of gallium arsenide by infrared interference
    砷化镓外延层厚度红外干涉测量方法
    China National Standards
    thickness

    English PDF
    GB/T 20220-2006 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
    塑料薄膜和薄片 样品平均厚度,卷平均厚度及单位质量面积的测定 称量法(称量厚度)
    China National Standards
    thickness

    English PDF
    GB/T 16921-2005 Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods
    金属覆盖层 覆盖层厚度测量 X射线光谱法
    China National Standards
    thickness

    English PDF
    GB/T 20018-2005 Metallic and non-metallic coatings -- Measurement of thickness -- Beta backscatter methods
    金属与非金属覆盖层 覆盖层厚度测量 β射线背散射法
    China National Standards
    thickness

    English PDF
    GB/T 4955-2005 Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution
    金属覆盖层 覆盖层厚度测量 阳极溶解库仑法
    China National Standards
    thickness

    English PDF
    GB/T 9451-2005 Determination of total or effective thickness of thin surface hardened layers of steel parts
    钢件薄表面总硬化层深度或有效硬化层深度的测定
    China National Standards
    thickness

    English PDF
    GB/T 8014.1-2005 Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 1:The measuring principle
    铝及铝合金阳极氧化 氧化膜厚度的测量方法 第1部分:测量原则
    China National Standards
    thickness

    English PDF
    GB/T 8014.2-2005 Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part2:Mass-loss method
    铝及铝合金阳极氧化 氧化膜厚度的测量方法 第2部分:质量损失法
    China National Standards
    thickness

    English PDF
    GB/T 8014.3-2005 Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 3:Split-beam microscope method
    铝及铝合金阳极氧化 氧化膜厚度的测量方法 第3部分:分光束显微镜法
    China National Standards
    thickness

    English PDF
    GB/T 6463-2005 Metallic and other inorganic coatings-Review of methods of measurement of thickness
    金属和其它无机覆盖层厚度测量方法评述
    China National Standards
    thickness

    English PDF
    GB/T 11378-2005 Metallic coatings-Measurement of coating thickness-Profilometric method
    金属覆盖层 覆盖层厚度测量 轮廓仪法
    China National Standards
    thickness

    English PDF
    GB/T 6312-2004 Micrometer for measuring pipe wall thicknesses
    壁厚千分尺
    China National Standards
    thickness

    English PDF
    GB/T 10613-2003 Industrial plate screens--thickness of 3 mm and above--Round and square holes
    工业用筛板 板厚≥3 mm的圆孔和方孔筛板
    China National Standards
    thickness

    English PDF
    GB/T 10612-2003 Industrial plate screens--thickness below 3 mm--Round and square holes
    工业用筛板 板厚<3 mm的圆孔和方孔筛板
    China National Standards
    thickness

    English PDF
    GB/T 4957-2003 Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness--Eddy current
    非磁性基体金属上非导电覆盖层 覆盖层厚度测量 涡流法
    China National Standards
    thickness

    English PDF

    Find out:113Items   |  To Page of: First -Previous-Next -Last  | 1 2

     

    +86-755-25831330        info@transcustoms.com 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2025 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards