Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43556.2-2023 |
Fiber Optic Cable Line Maintenance Technology Part 2: Underground Splice Box Water Leakage Monitoring using Optical Monitoring System {译} 光纤光缆线路维护技术 第2部分：使用光学监测系统的地埋接头盒浸水监测 |
China National Standards using |
 English PDF |
| GB/T 43530-2023 |
Performance test method for lobster eye focusing optical components {译} 龙虾眼型聚焦光学元件性能测试方法 |
China National Standards using |
English PDF |
| GB/T 43529.5-2023 |
Standardizing the Registration and Delivery of Product Ontologies using Spreadsheets Part 5: Activity Description Interface {译} 利用电子表格标准化产品本体的注册和传递 第5部分：活动描述接口 |
China National Standards using |
English PDF |
| GB/T 43529.3-2023 |
Standardizing the Registration and Delivery of Product Ontologies using Spreadsheets Part 3: Common Information Model Interface {译} 利用电子表格标准化产品本体的注册和传递 第3部分：公共信息模型接口 |
China National Standards using |
English PDF |
| GB/T 28819-2023 |
Aluminum alloy housing for inflatable high-voltage switchgear {译} 充气高压开关设备用铝合金外壳 |
China National Standards using |
English PDF |
| GB/T 9364.8-2023 |
Miniature fuses Part 8: Fusing resistors with special overcurrent protection {译} 小型熔断器 第8部分：带有特殊过电流保护的熔断电阻器 |
China National Standards using |
English PDF |
| GB/T 43282.1-2023 |
Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Part 1: using methods to analyze the release of carbon dioxide. {译} 塑料 暴露于海水中塑料材料需氧生物分解的测定 第1部分：采用分析释放二氧化碳的方法 |
China National Standards using |
English PDF |
| GB/T 22553-2023 |
Guidelines for assessing measurement uncertainty using estimates of repeatability, reproducibility and correctness {译} 利用重复性、再现性和正确度的估计值评定测量不确定度的指南 |
China National Standards using |
English PDF |
| GB/T 43102-2023 |
Metal coatings Porosity test Determination of porosity of gold or palladium coatings using sulfurous acid/sulfur dioxide vapor {译} 金属覆盖层 孔隙率试验 用亚硫酸/二氧化硫蒸汽测定金或钯镀层孔隙率 |
China National Standards using |
English PDF |
| GB/Z 42840-2023 |
Nanotechnology Testing the potency of silver nanoparticles using muramic acid released by Staphylococcus aureus {译} 纳米技术 利用金黄色葡萄球菌释放的胞壁酸检测银纳米颗粒的效力 |
China National Standards using |
English PDF |
| GB/T 25922-2023 |
Measurement of fluid flow in closed pipes Flow measurement using a vortex flowmeter installed in a circular cross-section pipe filled with fluid {译} 封闭管道中流体流量的测量 用安装在充满流体的圆形截面管道中的涡街流量计测量流量 |
China National Standards using |
English PDF |
| GB/T 42659-2023 |
Surface chemical analysis Scanning probe microscopy Determination of geometric quantities using scanning probe microscopy: Calibration of measurement systems {译} 表面化学分析 扫描探针显微术 采用扫描探针显微镜测定几何量：测量系统校准 |
China National Standards using |
English PDF |
| GB/T 42924.4-2023 |
Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 4: Dynamic decomposition method using a cone corrosion meter. {译} 塑料 烟雾产生 燃烧流腐蚀性的测定 第4部分:使用锥形腐蚀计的动态分解法 |
China National Standards using |
English PDF |
| GB/T 42745-2023 |
Information and Documentation Trusted third-party digital file (archives) warehousing {译} 信息与文献 可信的第三方数字文件（档案）仓储 |
China National Standards using |
English PDF |
| GB/T 42741-2023 |
Method for measuring electromagnetic parameters of solid materials using the free-space method {译} 固体材料使用自由空间法的电磁参数测量方法 |
China National Standards using |
English PDF |
| GB/T 15843.3-2023 |
Information technology; Security technology; Entity authentication; Part 3: Mechanisms using digital signature technology {译} 信息技术 安全技术 实体鉴别 第3部分：采用数字签名技术的机制 |
China National Standards using |
English PDF |
| GB/T 41498-2022 |
Test method for in-plane shear stress / shear strain response and shear modulus using shear frames for fiber reinforced plastic composites {译} 纤维增强塑料复合材料 用剪切框测定面内剪切应力/剪切应变响应和剪切模量的试验方法 |
China National Standards using |
English PDF |
| GB/T 22459.2-2022 |
Refractory mortars—Part 2：Determination of consistency using the reciprocating flow table method 耐火泥浆 第2部分：稠度试验方法（跳桌法） |
China National Standards using |
English PDF |
| GB/T 22459.1-2022 |
Refractory mortars—Part 1：Determination of consistency using the penetrating cone method 耐火泥浆 第1部分：稠度试验方法（锥入度法） |
China National Standards using |
English PDF |
| GB/T 26642-2022 |
Non-destructive testing—Industrial computed radiography with storage phosphor imaging plates—General principles for testing of metallic materials using X-rays and gamma rays 无损检测 基于存储磷光成像板的工业计算机射线照相检测 金属材料X射线和伽玛射线检测总则 |
China National Standards using |
English PDF |
| GB/T 12966-2022 |
The methods for determining aluminium and aluminium alloys conductivity using eddy current 铝及铝合金电导率涡流测试方法 |
China National Standards using |
English PDF |
| GB/T 41243-2022 |
Green warehousing and distribution requirements and assessment {译} 绿色仓储与配送要求及评估 |
China National Standards using |
English PDF |
| GB/T 1094.14-2022 |
Power transformers—Part 14: Liquid-immersed power transformer using high-temperature insulation materials 电力变压器 第14部分：采用高温绝缘材料的液浸式电力变压器 |
China National Standards using |
English PDF |
| GB/Z 42245-2022 |
Space Environment Applied Estimation of Solar Wind Energy Input to the Earth's Magnetosphere using the Ground-Based Pole Cover (PC) Index {译} 空间环境 利用地基磁极盖（PC）指数对输入地球磁层的太阳风能量的应用估算 |
China National Standards using |
English PDF |
| GB/Z 42244-2022 |
Space environment. Procedure for obtaining worst-case and confidence levels of the Earth's radiation belt fluence using quasi-dynamic models {译} 空间环境 利用准动态模型获得地球辐射带注量的最劣情况和置信水平的程序 |
China National Standards using |
English PDF |
| GB/T 16857.8-2022 |
Geometric Product Specification (GPS) Coordinate Measuring System (CMS) Acceptance and Re-inspection Testing Part 8: Coordinate Measuring Machines using Optical Distance Sensors {译} 产品几何技术规范（GPS） 坐标测量系统（CMS）的验收检测和复检检测 第8部分：使用光学距离传感器的坐标测量机 |
China National Standards using |
English PDF |
| GB/T 22366-2022 |
Sensory analysis - Methodology - General guidelines for the determination of smell, taste and flavor perception thresholds using the three-point forced choice method (3-AFC) {译} 感官分析 方法学 采用三点强迫选择法（3-AFC）测定嗅觉、味觉和风味觉察阈值的一般导则 |
China National Standards using |
English PDF |
| GB/T 25068.4-2022 |
Information technology Security technology Network security Part 4: Inter-network communication security protection using security gateways {译} 信息技术 安全技术 网络安全 第4部分：使用安全网关的网间通信安全保护 |
China National Standards using |
English PDF |
| GB/T 41997.3-2022 |
Electrical safety of machinery Vision-based electro-sensitive protective equipment Part 3: Special requirements for protective devices using stereo vision {译} 机械电气安全 基于视觉的电敏保护设备 第3部分：采用立体视觉保护器件特殊要求 |
China National Standards using |
English PDF |
| GB/T 41997.2-2022 |
Electrical safety of machinery - Vision-based electro-sensitive protective equipment - Part 2: Particular requirements for vision-based protective devices using reference patterns {译} 机械电气安全 基于视觉的电敏保护设备 第2部分：采用参考模式的视觉保护器件特殊要求 |
China National Standards using |
English PDF |
| GB/T 26719-2022 |
General Rules for Statistics of Water Use by Water-using Units {译} 用水单位用水统计通则 |
China National Standards using |
English PDF |
| GB/T 3655-2022 |
Method for Measuring Magnetic Properties of Electrical Steel Strip (Sheet) using Epstein Square {译} 用爱泼斯坦方圈测量电工钢带(片)磁性能的方法 |
China National Standards using |
English PDF |
| GB/T 40472-2021 |
Detection and identification of Cronartiaceae using real-time PCR 柱锈菌科实时荧光PCR检疫鉴定方法 |
China National Standards using |
English PDF |
| GB/T 40403-2021 |
Corrosion of metals and alloys—Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method 金属和合金的腐蚀 用四点弯曲法测定金属抗应力腐蚀开裂的方法 |
China National Standards using |
English PDF |
| GB/T 40315-2021 |
Plastics—Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value 塑料 采用水溶液保持湿度恒定进行状态调节和试验的小密闭容器 |
China National Standards using |
English PDF |
| GB/T 40280-2021 |
Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity using a single cylinder type rotational viscometer method 塑料 液态或乳液态或分散体系的树脂 用单筒旋转黏度计测定表观黏度 |
China National Standards using |
English PDF |
| GB/T 34015.3-2021 |
Recovery of traction battery used in electric vehicle—Echelon use—Part 3：Echelon using requirement 车用动力电池回收利用 梯次利用 第3部分：梯次利用要求 |
China National Standards using |
English PDF |
| GB/T 33047.3-2021 |
Plastics—Thermogravimetry (TG) of polymers—Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics 塑料 聚合物热重法（TG） 第3部分：使用 Ozawa-Friedman 绘图测定活化能和分析反应动力学 |
China National Standards using |
English PDF |
| GB/Z 40213-2021 |
Automation systems and integration - Applications integration approach using information exchange requirements modelling and software capability profiling 自动化系统与集成 基于信息交换需求建模和软件能力建规的应用集成方法 |
China National Standards using |
English PDF |
| GB/T 40192-2021 |
Detection and identification of Colletotrichum Corda using real-time PCR 刺盘孢属实时荧光PCR检疫鉴定方法 |
China National Standards using |
English PDF |
| GB/T 40261.2-2021 |
Ergonomics of the thermal environment—Evaluation of thermal environments in vehicles—Part 2:Evaluation of thermal comfort using human subjects 热环境的人类工效学 交通工具内热环境评估 第2部分：用受试者评价热舒适性 |
China National Standards using |
English PDF |
| GB/T 40254-2021 |
Detection and identification of Verticillium Nees using real-time PCR 轮枝菌属实时荧光PCR检疫鉴定方法 |
China National Standards using |
English PDF |
| GB/T 40114-2021 |
Jewellery—Determination of precious metal content—Difference method using inductively coupled plasma optical emission spectroscopy 首饰 贵金属含量的测定 ICP差减法 |
China National Standards using |
English PDF |
| GB/T 12703.2-2021 |
Textiles - Test methods for electrostatic propensity - Part 2: Test method using manual friction 纺织品 静电性能试验方法 第2部分：手动摩擦法 |
China National Standards using |
English PDF |
| GB/T 12703.1-2021 |
Textiles - Test methods for electrostatic propensity - Part 1: Test method using corona charging 纺织品 静电性能试验方法 第1部分：电晕充电法 |
China National Standards using |
English PDF |
| GB/T 8243.12-2021 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 12: Filtration efficiency using particle counting and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分：颗粒计数法滤清效率和容灰量 |
China National Standards using |
English PDF |
| GB/T 19346.3-2021 |
Methods of measurement of amorphous and nanocrystalline alloys-Part 3:AC magnetic properties of Fe-based amorphous strip using a single sheet specimen 非晶纳米晶合金测试方法 第3部分：铁基非晶单片试样交流磁性能 |
China National Standards using |
English PDF |
| GB/T 39693.3-2021 |
Rubber, vulcanized or thermoplastic—Determination of hardness—Part 3:Dead-load hardness using the very low rubber hardness (VLRH) scale 硫化橡胶或热塑性橡胶 硬度的测定 第3部分：用超低橡胶硬度（VLRH）标尺 测定定试验力硬度 |
China National Standards using |
English PDF |
| GB/T 25068.5-2021 |
Information technology—Security techniques—Network security—Part 5: Securing communications across networks using virtual private networks 信息技术 安全技术 网络安全 第5部分：使用虚拟专用网的跨网通信安全保护 |
China National Standards using |
English PDF |
| GB/T 20385.1-2021 |
Textiles—Determination of organotin compounds—Part 1：Derivatisation method using GC-MS 纺织品 有机锡化合物的测定 第1部分：衍生化气相色谱-质谱法 |
China National Standards using |
English PDF |
| GB/T 17901.3-2021 |
Information technology—Security techniques—Key management—Part 3: Mechanisms using asymmetric techniques 信息技术 安全技术 密钥管理 第3部分：采用非对称技术的机制 |
China National Standards using |
English PDF |
| GB/T 12668.901-2021 |
Adjustable speed electrical power drive systems—Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications—General requirements for setting energy efficiency standards for power driven equipment using the 调速电气传动系统 第9-1部分：电气传动系统、电机起动器、电力电子设备及其传动应用的生态设计 采用扩展产品法（EPA）和半解析模型（SAM）制定电气传动设备能效标准的一般要求 |
China National Standards using |
English PDF |
| GB/T 41074-2021 |
Microbeam analysis -- Method of specimen preparation for analysis of general powders using WDS and EDS 微束分析 用于波谱和能谱分析的粉末试样制备方法 |
China National Standards using |
English PDF |
| GB/T 41064-2021 |
Surface chemical analysis—Depth profiling—Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films 表面化学分析 深度剖析 用单层和多层薄膜测定X射线光电子能谱、俄歇电子能谱和二次离子质谱中深度剖析溅射速率的方法 |
China National Standards using |
English PDF |
| GB/T 17215.691-2021 |
Electricity metering data exchange -- The DLMS/COSEM suite -- Part 91: Communication profile using web-services to access a DLMS/COSEM server via a COSEM Access Service (CAS) 电测量数据交换? DLMS/COSEM组件? 第91部分：使用Web服务经COSEM访问服务（CAS）访问DLMS/COSEM服务器的通信配置 |
China National Standards using |
English PDF |
| GB/T 30331-2021 |
Indicator system of warehousing performance 仓储绩效指标体系 |
China National Standards using |
English PDF |
| GB/T 21071-2021 |
Quality requirement of warehousing service 仓储服务质量要求 |
China National Standards using |
English PDF |
| GB/T 17903.2-2021 |
Information technology—Security techniques—Non-repudiation—Part 2:Mechanisms using symmetric techniques 信息技术 安全技术 抗抵赖 第2部分：采用对称技术的机制 |
China National Standards using |
English PDF |
| GB/T 18996-2021 |
Silver jewellery alloys—Determination of silver—Volumetric (potentiometric) method using sodium chloride or potassium chloride 银合金首饰 银含量的测定 氯化钠或氯化钾容量法(电位滴定法) |
China National Standards using |
English PDF |
| GB/T 17832-2021 |
Silver jewellery alloys—Determination of silver—Volumetric (potentiometric) method using potassium bromide 银合金首饰 银含量的测定 溴化钾容量法(电位滴定法) |
China National Standards using |
English PDF |
| GB/T 39560.8-2021 |
Determination of certain substances in electrical and electronic products—Part 8:Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS),gas chromatography-mass spectrometry using a pyrolyzer/thermaldesorption accessory (Py/TD-GC-MS) 电子电气产品中某些物质的测定 第8部分：气相色谱-质谱法（GC-MS）与配有热裂解/热脱附的气相色谱-质谱法 （Py/TD-GC-MS）测定聚合物中的邻苯二甲酸酯 |
China National Standards using |
English PDF |
| GB/T 1232.3-2021 |
Rubber,unvulcanized—Determinations using a shearing-disc viscometer—Part 3:Determination of the Delta Mooney value for non-pigmented,oil-extended emulsion-polymerized SBR 未硫化橡胶 用圆盘剪切黏度计进行测定 第3部分：无填料的充油乳液聚合型苯乙烯-丁二烯橡胶Delta门尼值的测定 |
China National Standards using |
English PDF |
| GB/T 11060.10-2021 |
Natural gas—Determination of sulfur compounds—Part 10: Determination of sulfur compounds using gas chromatography method 天然气 含硫化合物的测定 第10部分：用气相色谱法测定硫化合物 |
China National Standards using |
English PDF |
| GB/T 39518-2020 |
Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems 产品几何技术规范（GPS） 使用单探针和多探针接触式探测系统坐标测量机的检测不确定度评估指南 |
China National Standards using |
English PDF |
| GB/T 39138.1-2020 |
Methods for chemical analysis of gold nickel chromium iron silicon boron alloys—Part 1：Determination of gold content—Potentiometric titration using ferrous sulfate 金镍铬铁硅硼合金化学分析方法 第1部分：金含量的测定 硫酸亚铁电位滴定法 |
China National Standards using |
English PDF |
| GB/T 39114-2020 |
Nanotechnologies—Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy 纳米技术 单壁碳纳米管的紫外/可见/近红外吸收光谱表征方法 |
China National Standards using |
English PDF |
| GB/T 38785-2020 |
General technical requirements of thin-film photovoltaic module recycling and reusing for use in building 建筑用薄膜太阳能电池组件回收再利用通用技术要求 |
China National Standards using |
English PDF |
| GB/T 17360-2020 |
Microbeam analysis—Method of quantitative determination for low contents of silicon and manganese in steels using electron probe microanalyzer 微束分析 钢中低含量硅、锰的电子探针定量分析方法 |
China National Standards using |
English PDF |
| GB/T 38952-2020 |
Non-destructive testing—Testing method for measuring residual stress using bulk wave 无损检测 残余应力超声体波检测方法 |
China National Standards using |
English PDF |
| GB/T 38898-2020 |
Non-destructive testing—Testing method for measuring coating bond strength using ultrasonic wave 无损检测 涂层结合强度超声检测方法 |
China National Standards using |
English PDF |
| GB/T 38897-2020 |
Non-destructive testing—Measurement method for material elastic modulus and Poisson’s ratio using ultrasoinc velocity 无损检测 弹性模量和泊松比的超声测量方法 |
China National Standards using |
English PDF |
| GB/T 38882-2020 |
Non-destructive testing—Testing method for wall-thickness loss of ferromagnetic tubes using magnetic flux leakage 无损检测 铁磁性管件壁厚变化漏磁检测方法 |
China National Standards using |
English PDF |
| GB/T 38878-2020 |
System tests for the projects of high-voltage direct current (HVDC) transmission power using voltage sourced converters (VSC) 柔性直流输电工程系统试验 |
China National Standards using |
English PDF |
| GB/T 24522-2020 |
Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳态裂纹扩展阻力的试验方法 |
China National Standards using |
English PDF |
| GB/T 14513.3-2020 |
Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 3:Method for calculating steady-state flow-rate characteristics of systems 气动 使用可压缩流体元件的流量特性测定 第 3 部分：系统稳态流量特性的计算方法 |
China National Standards using |
English PDF |
| GB/T 38769-2020 |
Metallic materials－Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces 金属材料 预裂纹夏比试样冲击加载断裂韧性的测定 |
China National Standards using |
English PDF |
| GB/T 38647.2-2020 |
Information technology—Security techniques—Anonymous digital signatures—Part 2: Mechanisms using a group public key 信息技术 安全技术 匿名数字签名 第2部分：采用群组公钥的机制 |
China National Standards using |
English PDF |
| GB/T 38680-2020 |
Technical guidelines for central heating system using low grade industrial surplus heat 工业低品位余热集中供热系统技术导则 |
China National Standards using |
English PDF |
| GB/T 8243.14-2020 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 14:Cold start simulation and hydraulic pulse durability for composite filter housings 内燃机全流式机油滤清器试验方法 第14部分：复合材料滤清器的冷起动模拟和液压脉冲耐久试验 |
China National Standards using |
English PDF |
| GB/T 38447-2020 |
Micro-electromechanical system technology—Fatigue testing method of MEMS structure using resonant vibration 微机电系统（MEMS）技术 MEMS结构共振疲劳试验方法 |
China National Standards using |
English PDF |
| GB/T 39621-2020 |
Textiles—Quantitative chemical analysis—Mixture of cross-linked lyocell fibres and viscose or cupro or modal (method using formic acid and zinc chloride) 纺织品 定量化学分析 交联型莱赛尔纤维与粘胶纤维、铜氨纤维、莫代尔纤维的混合物（甲酸/氯化锌法） |
China National Standards using |
English PDF |
| GB/T 15852.1-2020 |
Information technology—Security techniques—Message authentication codes—Part 1: Mechanisms using a block cipher 信息技术 安全技术 消息鉴别码 第1部分：采用分组密码的机制 |
China National Standards using |
English PDF |
| GB/T 12703.8-2020 |
Textiles—Test methods for electrostatic propensity—Part 8:Test method using horizontal mechanical friction 纺织品 静电性能试验方法 第8部分：水平机械摩擦法 |
China National Standards using |
English PDF |
| GB/T 12703.5-2020 |
Textiles—Test methods for electrostatic propensity—Part 5：Test method using rotary mechanical friction 纺织品 静电性能试验方法 第5部分：旋转机械摩擦法 |
China National Standards using |
English PDF |
| GB/T 1632.4-2020 |
Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials 塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第4部分：聚碳酸酯(PC)模塑和挤出材料 |
China National Standards using |
English PDF |
| GB/T 24635.4-2020 |
Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 4: Evaluating task-specific measurement uncertainty using simulation 产品几何技术规范（GPS） 坐标测量机（CMM） 确定测量不确定度的技术 第4部分：应用仿真技术评估特定任务的测量不确定度 |
China National Standards using |
English PDF |
| GB/T 39710-2020 |
Polycarbonate / acrylonitrile-butadiene-styrene (PC / ABS) material for charging spot housing of electric vehicle 电动汽车充电桩壳体用聚碳酸酯/丙烯腈-丁二烯-苯乙烯（PC/ABS）专用料 |
China National Standards using |
English PDF |
| GB/T 39699-2020 |
Rubber—Identification of polymers—Pyrolytic gas-chromatographic method using mass-spectrometric detection 橡胶 聚合物的鉴定 裂解气相色谱-质谱法 |
China National Standards using |
English PDF |
| GB/T 39528-2020 |
Test method for determining the seismic drift causing the panels fallout from curtain wall system 建筑幕墙面板抗地震脱落检测方法 |
China National Standards using |
English PDF |
| GB/T 39653-2020 |
using GB/T 36000 in management systems 在管理体系中使用GB/T 36000 |
China National Standards using |
English PDF |
| GB/T 39618-2020 |
Specifications for operation and maintenance of the reference stations using global navigation satellite system 卫星导航定位基准站网运行维护技术规范 |
China National Standards using |
English PDF |
| GB/T 39616-2020 |
Specification for network real-time kinematic（RTK） surveys based on the reference stations using global navigation satellite system 卫星导航定位基准站网络实时动态测量（RTK） 规范 |
China National Standards using |
English PDF |
| GB/T 39615-2020 |
Specifications for testing of reference stations using global navigation satellite system 卫星导航定位基准站网测试技术规范 |
China National Standards using |
English PDF |
| GB/T 39614-2020 |
Quality assessment specifications for reference stations using global navigation satellite system 卫星导航定位基准站网质量评价规范 |
China National Standards using |
English PDF |
| GB/T 39439-2020 |
Specification for service management of third-party warehousing for e-commerce 电子商务第三方仓储服务管理规范 |
China National Standards using |
English PDF |
| GB/T 39283-2020 |
Non-destructive testing—Testing method for surface-wave testing using electromagnetic acoustic transducer (EMAT) techniques 无损检测 电磁声换能器（EMAT）技术表面波检测方法 |
China National Standards using |
English PDF |
| GB/T 39282-2020 |
Non-destructive testing—Testing method for pulse-echo testing using electromagnetic acoustic transducer (EMAT) techniques 无损检测 电磁声换能器（EMAT）技术脉冲回波检测方法 |
China National Standards using |
English PDF |
| GB/T 39141.2-2020 |
Mineral and sapphire watch-glasses—Part 2：Assembly to the case by adhesive or using a gasket 无机和蓝宝石手表玻璃 第2部分：用胶粘或密封圈装到表壳上的配合 |
China National Standards using |
English PDF |
| GB/T 33588.5-2020 |
Lightning protection system components (LPSC)—Part 5: Requirements for earth electrode inspection housings and earth electrode seals 雷电防护系统部件（LPSC）第5部分：接地极检测箱和接地极密封件的要求 |
China National Standards using |
English PDF |
| GB/T 39484-2020 |
Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach 纤维增强塑料复合材料 用校准端载荷分裂试验（C-ELS）和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性 |
China National Standards using |
English PDF |
| GB/T 38328-2019 |
Common specifications of high-voltage direct current circuit-breakers for high-voltage direct current transmission using voltage sourced converters（VSC-HVDC） 柔性直流系统用高压直流断路器的共用技术要求 |
China National Standards using |
English PDF |
| GB/T 38328-2019 |
Common specifications of high-voltage direct current circuit-breakers for high-voltage direct current transmission using voltage sourced converters（VSC-HVDC） 柔性直流系统用高压直流断路器的共用技术要求 |
China National Standards using |
English PDF |
| GB/T 38309-2019 |
Toxicity testing of fire effluents—Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis 火灾烟气流毒性组分测试 FTIR分析火灾烟气中气体组分的指南 |
China National Standards using |
English PDF |
| GB/T 38328-2019 |
Common specifications of high-voltage direct current circuit-breakers for high-voltage direct current transmission using voltage sourced converters（VSC-HVDC） 柔性直流系统用高压直流断路器的共用技术要求 |
China National Standards using |
English PDF |
| GB/T 38309-2019 |
Toxicity testing of fire effluents—Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis 火灾烟气流毒性组分测试 FTIR分析火灾烟气中气体组分的指南 |
China National Standards using |
English PDF |
| GB/T 51353-2019 |
Standard for withdrawal of housing provident fund 住房公积金提取业务标准 |
China National Standards using |
English PDF |
| GB/Z 37925-2019 |
Technical requirements of warehousing operation for grain containerized packages 粮食集装化包装仓储作业技术要求 |
China National Standards using |
English PDF |
| GB/T 15852.3-2019 |
Information technology—Security techniques—Message authentication codes (MACs)—Part 3: Mechanisms using a universal hash-function 信息技术 安全技术 消息鉴别码 第3部分：采用泛杂凑函数的机制 |
China National Standards using |
English PDF |
| GB/T 37660-2019 |
Technical specification of power electronic devices for high-voltage direct current (HVDC) transmission using voltage sourced converters (VSC) 柔性直流输电用电力电子器件技术规范 |
China National Standards using |
English PDF |
| GB/T 37630-2019 |
Textiles—Quantitative chemical analysis—Mixtures of acetate or triacetate with certain other fibres（method using hydrochloric acid） 纺织品 定量化学分析 醋酯纤维或三醋酯纤维与某些其他纤维的混合物（盐酸法） |
China National Standards using |
English PDF |
| GB/T 37629-2019 |
Textiles—Quantitative chemical analysis—Mixtures of acrylic with certain other fibres（method using formic acid and zinc chloride） 纺织品 定量化学分析 聚丙烯腈纤维与某些其他纤维的混合物（甲酸/氯化锌法） |
China National Standards using |
English PDF |
| GB/T 23901.5-2019 |
Non-destructive testing—Image quality of radiographs—Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators 无损检测 射线照相检测图像质量 第5部分：双丝型像质计图像不清晰度的测定 |
China National Standards using |
English PDF |
| GB/T 23901.2-2019 |
Non-destructive testing—Image quality of radiographs—Part 2:Determination of the image quality value using step/hole-type image quality indicators 无损检测 射线照相检测图像质量 第2部分：阶梯孔型像质计像质值的测定 |
China National Standards using |
English PDF |
| GB/T 11026.10-2019 |
Electrical insulating materials—Thermal endurance properties—Part 10: Accelerated determination of relative thermal endurance using analytical test methods(RTEA)—Instructions for calculation based on activation energy 电气绝缘材料 耐热性 第10部分：利用分析试验方法加速确定相对耐热指数(RTEA) 基于活化能计算的导则 |
China National Standards using |
English PDF |
| GB/T 23901.1-2019 |
Non-destructive testing—Image quality of radiographs—Part 1:Determination of the image quality value using wire-type image quality indicators 无损检测 射线照相检测图像质量 第1部分：丝型像质计像质值的测定 |
China National Standards using |
English PDF |
| GB/T 17215.646-2018 |
Electricity metering data exchange—The DLMS/COSEM suite——Part 46：Data link layer using HDLC protocol 电测量数据交换-DLMS/COSEM组件-第46部分：使用HDLC协议的数据链路层 |
China National Standards using |
English PDF |
| GB/T 37003.1-2018 |
Document management—Engineering ducument format using PDF—Part 1:Use of PDF1.6(PDF/E-1) 文献管理-采用PDF的工程文档格式-第1部分:PDF1.6(PDF/E-1)的使用 |
China National Standards using |
English PDF |
| GB/T 36955-2018 |
Technical specification for pre-insertion resistor of high- voltage direct current transmission using voltage sourced converters (VSC-HVDC) 柔性直流输电用启动电阻技术规范 |
China National Standards using |
English PDF |
| GB/T 36956-2018 |
Testing of voltage sourced converter valve base control unit for high-voltage direct current power transmission using voltage sourced converters 柔性直流输电用电压源换流器阀基控制设备试验 |
China National Standards using |
English PDF |
| GB/T 37015.2-2018 |
Performance of high-voltage direct current power transmission system using voltage sourced converters (VSC-HVDC)—Part 2: Transient-state 柔性直流输电系统性能-第2部分：暂态 |
China National Standards using |
English PDF |
| GB/T 37015.1-2018 |
Performance of high-voltage direct current power transmission system using voltage sourced converters (VSC-HVDC)—Part1: Steady-state 柔性直流输电系统性能-第1部分：稳态 |
China National Standards using |
English PDF |
| GB/T 37012-2018 |
Technical specification of earthing equipment for high-voltage direct current(HVDC) transmission using voltage sourced converters(VSC) 柔性直流输电接地设备技术规范 |
China National Standards using |
English PDF |
| GB/T 37010-2018 |
Technical specification of converter valves for high-voltage direct current power transmission using voltage sourced converters 柔性直流输电换流阀技术规范 |
China National Standards using |
English PDF |
| GB/T 37163-2018 |
Hydraulic fluid power—Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle 液压传动-采用遮光原理的自动颗粒计数法测定液样颗粒污染度 |
China National Standards using |
English PDF |
| GB/T 37070-2018 |
Supply service of agricultural production means—Specification for warehousing service of agricultural production means 农业生产资料供应服务-农资仓储服务规范 |
China National Standards using |
English PDF |
| GB/T 37131-2018 |
Nanotechnologies—Test method of semiconductor nanopowder using UV-Vis diffuse reflectance spectroscopy 纳米技术-半导体纳米粉体材料紫外-可见漫反射光谱的测试方法 |
China National Standards using |
English PDF |
| GB/T 36214.5-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第5部分：光散射法 |
China National Standards using |
English PDF |
| GB/T 36214.4-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part4:High-temperature method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第4部分：高温法 |
China National Standards using |
English PDF |
| GB/T 36214.2-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 2:Universal calibration method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第2部分：普适校正法 |
China National Standards using |
English PDF |
| GB/T 36214.3-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第3部分：低温法 |
China National Standards using |
English PDF |
| GB/T 36214.1-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 1:General principles 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第1部分：通则 |
China National Standards using |
English PDF |
| GB/T 27419-2018 |
Guide to the evaluation and expression of uncertainty in measurement—Supplement 1: Propagation of distributions using a Monte Carlo method 测量不确定度评定和表示 补充文件1: 基于蒙特卡洛方法的分布传播 |
China National Standards using |
English PDF |
| GB/T 36386-2018 |
Specification of hygienic housing for microfiltration membrane elements 微孔膜滤芯用卫生级过滤器外壳技术要求 |
China National Standards using |
English PDF |
| GB/T 36524-2018 |
Tools for pressing—Compression springs with rectangular section—Housing dimensions and colour coding 冲模 矩形截面压缩弹簧 安装尺寸和颜色标识 |
China National Standards using |
English PDF |
| GB/T 7813-2018 |
Rolling bearings－Split type plummer block housings－Boundary dimensions 滚动轴承 剖分立式轴承座 外形尺寸 |
China National Standards using |
English PDF |
| GB/T 15843.6-2018 |
Information technology—Security techniques—Entity authentication—Part 6: Mechanisms using manual data transfer 信息技术 安全技术 实体鉴别 第6部分：采用人工数据传递的机制 |
China National Standards using |
English PDF |
| GB/T 34953.2-2018 |
Information technology－Security techniques—Anonymous entity authentication－Part 2: Mechanisms based on signatures using a group public key 信息技术 安全技术 匿名实体鉴别 第2部分：基于群组公钥签名的机制 |
China National Standards using |
English PDF |
| GB/T 36575-2018 |
Principles and requirements for water classified using and water recycling in industrial park 产业园区水的分类使用及循环利用原则和要求 |
China National Standards using |
English PDF |
| GB/T 8243.15-2018 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 15: Vibration fatigue test for composite filter housings 内燃机全流式机油滤清器试验方法 第15部分：复合材料滤清器的振动疲劳试验 |
China National Standards using |
English PDF |
| GB/T 20935.3-2018 |
Metal materials—Method of electromagnetic acoustic inspection—Part 3: Standard practice for ultrasonic surface examinations using electromagnetic acoustic transducer (EMAT) techniques 金属材料 电磁超声检测方法 第3部分：利用电磁超声换能器技术进行超声表面检测的方法 |
China National Standards using |
English PDF |
| GB/T 36024-2018 |
Metallic materials—Sheet and strip—Biaxial tensile testing method using a cruciform test piece 金属材料 薄板和薄带 十字形试样双向拉伸试验方法 |
China National Standards using |
English PDF |
| GB/T 20935.2-2018 |
Metal materials—Method of electromagnetic acoustic inspection—Part 2: Standard practice for ultrasonic testing using electromagnetic acoustic transducer (EMAT) techniques 金属材料 电磁超声检测方法 第2部分：利用电磁超声换能器技术进行超声检测的方法 |
China National Standards using |
English PDF |
| GB/T 36060-2018 |
Process control and testing methods on the water-based adhesives using in hardcover book binding production 精装书籍用水基胶黏剂粘接过程控制要求及检验方法 |
China National Standards using |
English PDF |
| GB/T 36076-2018 |
General specification for information identification of automatic warehousing and distribution packing-case 自动作业仓储配送包装箱信息标识通用规范 |
China National Standards using |
English PDF |
| GB/T 20485.42-2018 |
Methods for the calibration of vibration and shock transducers—Part 42: Calibration of seismometers with high accuracy using acceleration of gravity 振动与冲击传感器校准方法 第42部分：高精度地震计的重力加速度法校准 |
China National Standards using |
English PDF |
| GB/T 35909-2018 |
Detection of mycoplasma hyopneumoniae using PCR method 猪肺炎支原体PCR检测方法 |
China National Standards using |
English PDF |
| GB/T 35867-2018 |
Inspection of grain and oils—Determination of phospholipids content in lecithins—high performance liquid chromatography using a light-scattering detector 粮油检验 卵磷脂中磷脂含量的测定 高效液相色谱蒸发光散射检测法 |
China National Standards using |
English PDF |
| GB/T 22319.11-2018 |
Measurement of quartz crystal unit parameters—Part 11:Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction 石英晶体元件参数的测量 第11部分：采用自动网络分析技术和误差校正确定负载谐振频率和有效负载电容的标准方法 |
China National Standards using |
English PDF |
| GB/T 34894-2017 |
Micro-electromechanical system technology—Measuring method for strain gradient measurements of MEMS microstructures using an optical interferometer 微机电系统（MEMS）技术 基于光学干涉的MEMS微结构应变梯度测量方法 |
China National Standards using |
English PDF |
| GB/T 34900-2017 |
Micro-electromechanical system technology—Measuring method for residual strain measurements of MEMS microstructures using an optical interferometer 微机电系统（MEMS）技术 基于光学干涉的MEMS微结构残余应变测量方法 |
China National Standards using |
English PDF |
| GB/T 6881.2-2017 |
Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Engineering methods for small movable sources in reverberant fields—Comparison method for a hard-walled test room 声学 声压法测定噪声源声功率级和声能量级 混响场内小型可移动声源工程法 硬壁测试室比较法 |
China National Standards using |
English PDF |
| GB/T 23193-2017 |
Determination of theanine in tea—Uusing high performance liquid chromatography 茶叶中茶氨酸的测定 高效液相色谱法 |
China National Standards using |
English PDF |
| GB/T 13885-2017 |
Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc in feeds—Method using atomic absorption spectrometry 饲料中钙、铜、铁、镁、锰、钾、钠和锌含量的测定 原子吸收光谱法 |
China National Standards using |
English PDF |
| GB/T 34893-2017 |
Micro-electromechanical system technology—Measuring method for in-plane length measurements of MEMS microstructures using an optical interferometer 微机电系统（MEMS）技术 基于光学干涉的MEMS微结构面内长度测量方法 |
China National Standards using |
English PDF |
| GB/T 16857.5-2017 |
Geometrical product specifications(GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 5:CMMs using single or multiple stylus contacting probing systems 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第5部分：使用单探针或多探针接触式探测系统的坐标测量机 |
China National Standards using |
English PDF |
| GB/T 1236-2017 |
Industrial fan—Performance testing using standardized airways 工业通风机 用标准化风道性能试验 |
China National Standards using |
English PDF |
| GB/T 13242-2017 |
Iron ores—Low-temperature disintegration test—Method using cold tumbling after static reduction 铁矿石 低温粉化试验 静态还原后使用冷转鼓的方法 |
China National Standards using |
English PDF |
| GB/T 34474.1-2017 |
Determination of banded structure of steel—Part1：Micrographic method using standards diagrams 钢中带状组织的评定 第1部分：标准评级图法 |
China National Standards using |
English PDF |
| GB/T 34353-2017 |
Earth-moving machinery－Machine-control systems (MCS) using electronic components－Performance criteria and tests for functional safety 土方机械 应用电子器件的机器控制系统(MCS) 功能性安全的性能准则和试验 |
China National Standards using |
English PDF |
| GB/T 34525-2017 |
Safety rules for handling, loading and unloading, storing and using of cylinder 气瓶搬运、装卸、储存和使用安全规定 |
China National Standards using |
English PDF |
| GB/T 34362-2017 |
Non-destructive testing—Guide for eddy current testing using conformable sensor arrays 无损检测 适形阵列涡流检测导则 |
China National Standards using |
English PDF |
| GB/T 19587-2017 |
Determination of the specific surface area of solids by gas adsorption using the BET method 气体吸附BET法测定固态物质比表面积 |
China National Standards using |
English PDF |
| GB/T 34499.1-2017 |
Method for chemical analysis of iridium compounds—Part 1: Determination of iridium content—Electricity titration using ferrous sulfate 铱化合物化学分析方法 第1部分：铱量的测定 硫酸亚铁电流滴定法 |
China National Standards using |
English PDF |
| GB/T 19322.2-2017 |
Small craft—Airborne sound emitted by powered recreational craft—Part 2: Sound assessment using reference craft 小艇 机动游艇空气噪声 第2部分：用标准艇进行噪声评估 |
China National Standards using |
English PDF |
| GB/T 19322.3-2017 |
Small craft—Airborne sound emitted by powered recreational craft—Part 3: Sound assessment using calculation measurement procedures 小艇 机动游艇空气噪声 第3部分：用计算和测量程序进行噪声评估 |
China National Standards using |
English PDF |
| GB/T 17466.24-2017 |
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment 家用和类似用途固定式电气装置的电器附件安装盒和外壳 第24部分：住宅保护装置和其他电源功耗电器的外壳的特殊要求 |
China National Standards using |
English PDF |
| GB/T 34033.2-2017 |
Ships and marine technology—Risk assessment on anti-fouling systems on ships—Part 2:Marine environmental risk assessment method for anti-fouling systems on ships using biocidally active substances 船舶与海上技术 船舶防污底系统风险评估 第2部分：使用防污活性物质的船舶防污底系统的海洋环境风险评估方法 |
China National Standards using |
English PDF |
| GB/T 33600-2017 |
Sandwich composite wallboard with porous concrete using metal tailings 金属尾矿多孔混凝土夹芯系统复合墙板 |
China National Standards using |
English PDF |
| GB/T 34002-2017 |
Microbeam analysis—Analytical transmission electron microscopy—Methods for calibrating image magnification by using reference materials having periodic structures 微束分析 透射电子显微术 用周期结构标准物质校准图像放大倍率的方法 |
China National Standards using |
English PDF |
| GB/T 33896-2017 |
Test method for cyclic pressure of membrane housing 分离膜外壳循环压力试验方法 |
China National Standards using |
English PDF |
| GB/T 1232.4-2017 |
Rubber,unvulcanized—Determinations using a shearing-disc viscometer—Part 4: Determination of the Mooney stress-relaxation rate 未硫化橡胶 用圆盘剪切黏度计进行测定 第4部分：门尼应力松弛率的测定 |
China National Standards using |
English PDF |
| GB/T 33928-2017 |
Reciprocating internal combustion engines—Measurement method for exhaust silencers—Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio 往复式内燃机 排气消声器测量方法 声压法排气噪声声功率级和插入损失及功率损失比 |
China National Standards using |
English PDF |
| GB/T 13477.3-2017 |
Test method for building sealants—Part 3：Determination of extrudability of sealants using standardized apparatus 建筑密封材料试验方法 第3部分：使用标准器具测定密封材料挤出性的方法 |
China National Standards using |
English PDF |
| GB/T 33844-2017 |
Information technology—Biometrics—Tenprint capture using biometric application programming interface(BioAPI) 信息技术 生物特征识别 用于生物特征十指指纹采集应用编程接口（BioAPI） |
China National Standards using |
English PDF |
| GB/T 7809-2017 |
Rolling bearings—Housings for insert bearings—Boundary dimensions 滚动轴承 外球面球轴承座 外形尺寸 |
China National Standards using |
English PDF |
| GB/T 18049-2017 |
Ergonomics of the thermal environment—Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria 热环境的人类工效学 通过计算PMV和PPD指数与局部热舒适准则对热舒适进行分析测定与解释 |
China National Standards using |
English PDF |
| GB/T 1859.4-2017 |
Reciprocating internal combustion engines—Measurement of sound power levels using sound pressure—Part 4:Survey method using a reference sound source 往复式内燃机 声压法声功率级的测定 第4部分：使用标准声源简易法 |
China National Standards using |
English PDF |
| GB/T 33588.5-2017 |
Lightning protection system components(LPSC)—Part 5: Requirements for earth electrode inspection housings and earth electrode seals 雷电防护系统部件（LPSC） 第5部分：接地极检测箱和接地极密封件的要求 |
China National Standards using |
English PDF |
| GB/T 35739-2017 |
Continuous vertical conveyor for unit goods in logistics warehousing distribution center 物流仓储配送中心成件物品连续垂直输送机 |
China National Standards using |
English PDF |
| GB/T 34139-2017 |
Technical specification of converters for high-voltage direct current (HVDC) transmission using voltage sourced converters (VSC) 柔性直流输电换流器技术规范 |
China National Standards using |
English PDF |
| GB/T 35392-2017 |
Non-destructive testing—Test method for determining electrical conductivity using the electromagnetic (eddy-current) method 无损检测 电导率电磁（涡流）测定方法 |
China National Standards using |
English PDF |
| GB/T 3836.22-2017 |
Explosive atmospheres—Part 22: Protection of equipment and transmission system using optical radiation 爆炸性环境 第22部分：光辐射设备和传输系统的保护措施 |
China National Standards using |
English PDF |
| GB/T 35767-2017 |
Specifications for basic product of the reference stations using global navigation satellite system 卫星导航定位基准站网基本产品规范 |
China National Standards using |
English PDF |
| GB/T 35769-2017 |
Specification for service of the reference stations using global navigation satellite system 卫星导航定位基准站网服务规范 |
China National Standards using |
English PDF |
| GB/T 35768-2017 |
Specification for service and management system of the reference stations using global navigation satellite system 卫星导航定位基准站网服务管理系统规范 |
China National Standards using |
English PDF |
| GB/T 14513.1-2017 |
Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow 气动 使用可压缩流体元件的流量特性测定 第1部分：稳态流动的一般规则和试验方法 |
China National Standards using |
English PDF |
| GB/T 35679-2017 |
Measuring method for electromagnetic parameters of solid materials at microwave frequencies using waveguide 固体材料微波频段使用波导装置的电磁参数测量方法 |
China National Standards using |
English PDF |
| GB/T 15843.2-2017 |
Information technology—Security techniques—Entity authentication—Part 2: Mechanisms using symmetric encipherment algorithms 信息技术 安全技术 实体鉴别 第2部分：采用对称加密算法的机制 |
China National Standards using |
English PDF |
| GB/T 2910.25-2017 |
Textiles—Quantitative chemical analysis—Part 25：Mixtures of polyester and certain other fibres（method using trichloroacetic acid and chloroform） 纺织品 定量化学分析 第25部分：聚酯纤维与某些其他纤维的混合物（三氯乙酸/三氯甲烷法） |
China National Standards using |
English PDF |
| GB/T 2910.26-2017 |
Textiles—Qualitative chemical analysis—Part 26：Mixtures of melamine and cotton or aramide fibers（method using hot formic acid） 纺织品 定量化学分析 第26部分：三聚氰胺纤维与棉或芳纶的混合物（热甲酸法） |
China National Standards using |
English PDF |
| GB/T 35257-2017 |
Textiles—Quantitative chemical analysis—Mixtures of chitosan and certain other fibers(method using acetic acid) 纺织品 定量化学分析 壳聚糖纤维与某些其他纤维的混合物 (乙酸法) |
China National Standards using |
English PDF |
| GB/T 35739-2017 |
Continuous vertical conveyor for unit goods in logistics warehousing distribution center 物流仓储配送中心成件物品连续垂直输送机 |
China National Standards using |
English PDF |
| GB/T 35703-2017 |
Specification of system design for high-voltage direct current (HVDC) transmission using voltage sourced converters (VSC) 柔性直流输电系统成套设计规范 |
China National Standards using |
English PDF |
| GB/T 35680-2017 |
Measuring method for electromagnetic parameters of liquid materials at microwave frequencies using an open-ended coaxial probe 液体材料微波频段使用开口同轴探头的电磁参数测量方法 |
China National Standards using |
English PDF |
| GB/T 3768-2017 |
Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Survey method using an enveloping measurement surface over a reflecting plane 声学 声压法测定噪声源声功率级和声能量级 采用反射面上方包络测量面的简易法 |
China National Standards using |
English PDF |
| GB/T 35406-2017 |
ebXML based warehousing inbound instruction and notification 基于ebXML的仓储入库指令和通知 |
China National Standards using |
English PDF |
| GB/T 35404-2017 |
ebXML based warehousing outbound instruction and notification 基于ebXML的仓储出库指令和通知 |
China National Standards using |
English PDF |
| GB/T 35738-2017 |
Logistics warehousing distribution center conveyor, sorting and peripheral equipment—Classification and terminology 物流仓储配送中心输送、分拣及辅助设备 分类和术语 |
China National Standards using |
English PDF |
| GB/T 35486-2017 |
Specification of spiral-conveyer for logistics warehousing distribution center 物流仓储配送中心螺旋箱式输送机技术规范 |
China National Standards using |
English PDF |
| GB/T 35780.2-2017 |
Customer contact service—Part 2: Requirements for clients using the services of customer contact centres 顾客联络服务 第2部分：使用顾客联络中心服务的委托方要求 |
China National Standards using |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
