Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 26705-2023 |
Lightweight printing paper {译} 轻型印刷纸 |
China National Standards weight |
 English PDF |
| GB/T 6803-2023 |
Drop weight test method for non-plastic transition temperature of ferritic steels {译} 铁素体钢的无塑性转变温度落锤试验方法 |
China National Standards weight |
English PDF |
| GB/T 21461.2-2023 |
Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 2: Specimen preparation and property determination {译} 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards weight |
English PDF |
| GB/T 21461.1-2023 |
Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 1: Nomenclature system and basis for classification {译} 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards weight |
English PDF |
| GB/T 43148-2023 |
Additive manufacturing structural lightweight design requirements {译} 增材制造 结构轻量化设计要求 |
China National Standards weight |
English PDF |
| GB/T 23451-2023 |
Lightweight partition boards for construction {译} 建筑用轻质隔墙条板 |
China National Standards weight |
English PDF |
| GB/T 42869-2023 |
Requirements for simplification and lightweighting of three-dimensional models of mechanical products {译} 机械产品三维模型简化与轻量化要求 |
China National Standards weight |
English PDF |
| GB/T 41924.2-2022 |
Lightweight conveyor belts - Part 2: Glossary of equivalent terms {译} 轻型输送带 第2部分：等同术语表 |
China National Standards weight |
English PDF |
| GB/T 42162-2022 |
Raw rubber - Determination of residual monomers and other volatile low molecular weight compounds by capillary gas chromatography - Thermal desorption (dynamic headspace) method {译} 生橡胶 毛细管气相色谱测定残留单体和其他挥发性低分子量化合物 热脱附（动态顶空）法 |
China National Standards weight |
English PDF |
| GB/T 41763-2022 |
Dimensions, shapes, weights and allowable deviations of twin-roll cast-rolled hot-rolled steel sheets and strips {译} 双辊铸轧热轧薄钢板及钢带的尺寸、外形、重量及允许偏差 |
China National Standards weight |
English PDF |
| GB/T 40442-2021 |
Paper, board and pulps—Determination of weight factor in fibre furnish analysis 纸、纸板和纸浆 纤维组成分析中质量因子的测定 |
China National Standards weight |
English PDF |
| GB/T 40169-2021 |
Compression-moulded plates of ultra-high-molecular-weight polyethylene(PE-UHMW)and high density polyethylene (PE-HD) 超高分子量聚乙烯（PE-UHMW）和高密度聚乙烯（PE-HD）模塑板材 |
China National Standards weight |
English PDF |
| GB/T 39799-2021 |
Dimension,shape,weight and tolerances for titanium and titanium alloy bars and wires 钛及钛合金棒材和丝材尺寸、外形、重量及允许偏差 |
China National Standards weight |
English PDF |
| GB/T 40792-2021 |
Test method of weight loss of sintered neodymium iron boron permanent magnets 烧结钕铁硼永磁体失重试验方法 |
China National Standards weight |
English PDF |
| GB/T 39205-2020 |
Information security technology—Light-weight authentication and access control mechanism 信息安全技术 轻量级鉴别与访问控制机制 |
China National Standards weight |
English PDF |
| GB/T 908-2019 |
Forged bars for dimensions,shape,weight and tolerances 锻制钢棒尺寸、外形、重量及允许偏差 |
China National Standards weight |
English PDF |
| GB/T 37989-2019 |
Lightweight concrete of sulphoaluminate cement 轻质硫铝酸盐水泥混凝土 |
China National Standards weight |
English PDF |
| GB/T 37896-2019 |
Lightweight crystalline silicon photovoltaic (PV) laminated glass 轻质晶体硅光伏夹层玻璃 |
China National Standards weight |
English PDF |
| GB/T 37858-2019 |
Pulp—Determination of the weight of wet fiber 纸浆 纤维湿重的测定 |
China National Standards weight |
English PDF |
| GB/T 908-2019 |
Forged bars for dimensions,shape,weight and tolerances 锻制钢棒尺寸、外形、重量及允许偏差 |
China National Standards weight |
English PDF |
| GB/T 709-2019 |
Dimension,shape,weight and tolerance for hot-rolled steel strip,plate and sheet 热轧钢板和钢带的尺寸、外形、重量及允许偏差 |
China National Standards weight |
English PDF |
| GB/T 708-2019 |
Dimension,shape,weight and tolerance for cold-rolled steel strip and sheet 冷轧钢板和钢带的尺寸、外形、重量及允许偏差 |
China National Standards weight |
English PDF |
| GB/T 10335.2-2018 |
Coated paper and board—Light weight coated paper 涂布纸和纸板-轻量涂布纸 |
China National Standards weight |
English PDF |
| GB/T 36798-2018 |
Test methods of diameter and weight of fixed length for dipped cords and yarns 浸胶线绳、帘线、纱线直径和定长度重量试验方法 |
China National Standards weight |
English PDF |
| GB/T 8363-2018 |
Steel—Drop-weight tear tests method 钢材 落锤撕裂试验方法 |
China National Standards weight |
English PDF |
| GB/T 35864-2018 |
Grain and oil machinery－Grain volume-weight meter for inspection 粮油机械 检验用粮食容重器 |
China National Standards weight |
English PDF |
| GB/T 2930.9-2017 |
Rules of seed testing for forage, turfgrass and other herbaceous plant—weight determination 草种子检验规程 重量测定 |
China National Standards weight |
English PDF |
| GB/T 34821-2017 |
Requirements for weight control healthcare service 体重控制保健服务要求 |
China National Standards weight |
English PDF |
| GB/T 34328-2017 |
Light weight thermally strengthened glass 轻质物理强化玻璃 |
China National Standards weight |
English PDF |
| GB/T 702-2017 |
Hot-rolled steel bars—Dimensions,shape,weight and tolerances 热轧钢棒尺寸、外形、重量及允许偏差 |
China National Standards weight |
English PDF |
| GB/T 34190-2017 |
Surface coating weight (thickness) of electrical steel—X-ray spectrometric method 电工钢表面涂层的重量（厚度） X射线光谱测试方法 |
China National Standards weight |
English PDF |
| GB/T 34214-2017 |
Iron ores—Determination of weight of free water 铁矿石 明水重量的测定 |
China National Standards weight |
English PDF |
| GB/T 33916-2017 |
Animal and vegetable fats and oils—Determination of conventional mass per volume (liter weight in air) 动植物油脂 常规单位体积质量（每升在空气中的重量）的测定 |
China National Standards weight |
English PDF |
| GB/T 19701.1-2016 |
Implants for surgery—Ultra-high-molecular-weight polyethylene—Part 1: Powder form 外科植入物 超高分子量聚乙烯 第1部分：粉料 |
China National Standards weight |
English PDF |
| GB/T 19701.2-2016 |
Implants for surgery—Ultra-high-molecular-weight polyethylene—Part 2: Moulded forms 外科植入物 超高分子量聚乙烯 第2部分：模塑料 |
China National Standards weight |
English PDF |
| GB/T 33290.2-2016 |
Specification for inspecting exit cultural relics—Part 2: weights and measures 文物出境审核规范 第2部分：度量衡 |
China National Standards weight |
English PDF |
| GB/T 32679-2016 |
Ultra-high-molecular-weight polyethylene(PE-UHMW) resin 超高分子量聚乙烯（PE-UHMW）树脂 |
China National Standards weight |
English PDF |
| GB 51022-2015 |
Technical code for steel structure of light-weight building with gabled frames 门式刚架轻型房屋钢结构技术规范 |
China National Standards weight |
English PDF |
| GB/T 31816-2015 |
Water treatment chemicals—Determination of the molecular weight and molecular weight distribution of polymers—Gel filtration chromatography 水处理剂 聚合物分子量及其分布的测定 凝胶色谱法 |
China National Standards weight |
English PDF |
| GB 17465.4-2015 |
Appliance couplers for household and similar general purposes—Part 2-4: Couplers dependent on appliance weight for engagement 家用和类似用途器具耦合器 第2-4部分：靠器具重量啮合的耦合器 |
China National Standards weight |
English PDF |
| GB/T 31529-2015 |
Digital printing materials—Computer direct plate-making plate（CTP Plate）—Test of unit area weight of photosensitive coating 数字印刷材料 计算机直接制版（CTP）版材 感光层单位面积质量的测定 |
China National Standards weight |
English PDF |
| GB/T 30668-2014 |
Ultra high molecular weight polyethylene fibre 8 strand braided ropes, 12 strand braided ropes and covered ropes 超高分子量聚乙烯纤维8股、12股编绳和复编绳索 |
China National Standards weight |
English PDF |
| GB/T 30977-2014 |
Hollow type guide rails for counterweight and balancing weight of lifts 电梯对重和平衡重用空心导轨 |
China National Standards weight |
English PDF |
| GB/T 30787-2014 |
Binder resin applied in digital printing materials―The determination average molecular weight and its distribution―gel permeation chromatography 数字印刷材料用成膜树脂 平均分子量及其分布的测定 凝胶渗透色谱法 |
China National Standards weight |
English PDF |
| GB/T 30361-2013 |
Testing method of loss in weight for pesticides 农药干燥减量的测定方法 |
China National Standards weight |
English PDF |
| GB/T 5498-2013 |
Inspection of grain and oils - Determination of test weight 粮油检验 容重测定 |
China National Standards weight |
English PDF |
| GB/T 29740-2013 |
Assembled temporary houses with light-weight steel framing 拆装式轻钢结构活动房 |
China National Standards weight |
English PDF |
| GB/T 29554-2013 |
Ultra high molecular weight polyethylene fibre 超高分子量聚乙烯纤维 |
China National Standards weight |
English PDF |
| GB/T 27970-2011 |
Test method for weight loss of non-metallic gasket materials upon exposure to elevated temperatures 非金属垫片材料烧失量试验方法 |
China National Standards weight |
English PDF |
| GB/T 28188-2011 |
Textiles - Determination of elasticity of horsetail hair interlining - Loop with hanging weight 纺织品 马尾衬布回弹性的测定 环状挂重法 |
China National Standards weight |
English PDF |
| GB/T 27843-2011 |
Chemicals - Determination of the low molecular weight content of a polymer using Gel permeation chromatography（GPC） 化学品 聚合物低分子量组分含量测定 凝胶渗透色谱法（GPC） |
China National Standards weight |
English PDF |
| GB/T 15229-2011 |
Lightweight aggregate concrete small hollow block 轻集料混凝土小型空心砌块 |
China National Standards weight |
English PDF |
| GB/T 4167-2011 |
weights 砝码 |
China National Standards weight |
English PDF |
| GB/T 26797-2011 |
weights of classes E1、E2、F1、F2、M1、M1-2、M2、M2-3、and M3 E1、E2、F1、F2、M1、M1-2、M2、M2-3、M3等级砝码 |
China National Standards weight |
English PDF |
| GB/T 17431.2-2010 |
Lightweight aggregates and its test methods - Part 2: Test methods for lightweight aggregates 轻集料及其试验方法 第2部分：轻集料试验方法 |
China National Standards weight |
English PDF |
| GB/T 25052-2010 |
Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions,shape and weight 连续热浸镀层钢板和钢带尺寸、外形、重量及允许偏差 |
China National Standards weight |
English PDF |
| GB/T 17431.1-2010 |
Lightweight aggregates and its test methods - Part 1：Lightweight aggregates 轻集料及其试验方法 第1部分：轻集料 |
China National Standards weight |
English PDF |
| GB/T 2441.6-2010 |
Determination of urea - Part 6: Water insoluble matter content - weight method 尿素的测定方法 第6部分：水不溶物含量 重量法 |
China National Standards weight |
English PDF |
| GB 17465.4-2009 |
Appliance couplers for household and similar general purposes - Part 2: Couplers dependent on appliance weight for engagement 家用和类似用途器具耦合器 第2部分：靠器具重量啮合的耦合器 |
China National Standards weight |
English PDF |
| GB/T 24443-2009 |
Test methods for weight, neps of top and scoured wool 毛条、洗净毛疵点及重量试验方法 |
China National Standards weight |
English PDF |
| GB/T 24263-2009 |
Drilling weight indicating system 石油钻井指重表 |
China National Standards weight |
English PDF |
| GB/T 13465.7-2009 |
Test method of the rates of body weight gain and porefilling of impermeable graphite 不透性石墨增重率和填孔率试验方法 |
China National Standards weight |
English PDF |
| GB/T 22838.4-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 4: Cigarettes weight 卷烟和滤棒物理性能的测定 第4部分：卷烟质量 |
China National Standards weight |
English PDF |
| GB/T 23451-2009 |
Light weight panels for partition wall used in buildings 建筑用轻质隔墙条板 |
China National Standards weight |
English PDF |
| GB 23177-2008 |
The safety and capability requirements and testing methods for barbell of weightlifting 举重杠铃的安全、性能要求和试验方法 |
China National Standards weight |
English PDF |
| GB/T 908-2008 |
Forged bars - Dimensions, shape, weight and tolerances 锻制钢棒尺寸、外形、重量及允许偏差 |
China National Standards weight |
English PDF |
| GB/T 702-2008 |
Hot-rolled steel bars - Dimensions，shape，weight and tolerances 热轧钢棒尺寸、外形、重量及允许偏差 |
China National Standards weight |
English PDF |
| GB/T 6726-2008 |
Cold forming sectional steel for vehicles - Dimensions, shape, weight and tolerances 汽车用冷弯型钢尺寸、外形、重量及允许偏差 |
China National Standards weight |
English PDF |
| GB/T 6723-2008 |
Cold forming sectional steel - Open sectional steel for general structure - Dimensions, shape, weight and permissible tolerances 通用冷弯开口型钢尺寸、外形、重量及允许偏差 |
China National Standards weight |
English PDF |
| GB/T 1850-2008 |
Marine male threaded weight quick-closing valves 船用外螺纹重块式快关阀 |
China National Standards weight |
English PDF |
| GB/T 21461.1-2008 |
Plastics - Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards weight |
English PDF |
| GB/T 10471-2008 |
Quick frozen fruits and vegetables - Determination of net weight 速冻水果和蔬菜 净重测定方法 |
China National Standards weight |
English PDF |
| GB/T 6803-2008 |
Test method for drop-weight test to determine nil-ductility transition temperature of ferritic steels 铁素体钢的无塑性转变温度落锤试验方法 |
China National Standards weight |
English PDF |
| GB/T 21864-2008 |
Standard test method for molecular weight averages and molecular weight distribution of polystyrene by high performance size-exclusion chromatography 聚苯乙烯的平均分子量和分子量分布的检测标准方法 高效体积排阻色谱法 |
China National Standards weight |
English PDF |
| GB/T 21461.2-2008 |
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards weight |
English PDF |
| GB/T 21406-2008 |
Internal combustion engines - Engine weight (mass) declaration 内燃机 发动机的重量（质量）标定 |
China National Standards weight |
English PDF |
| GB/T 16471-2008 |
Dimensional and weight constraints for transport package 运输包装件尺寸与质量界限 |
China National Standards weight |
English PDF |
| GB/T 8363-2007 |
Test method for drop - weight tear tests of steel products 铁素体钢落锤撕裂试验方法 |
China National Standards weight |
English PDF |
| GB 10738-2007 |
Working chemical - General rules for assay - weight titration 工作基准试剂 含量测定通则 称量滴定法 |
China National Standards weight |
English PDF |
| GB 10737-2007 |
Working chemical - General rules for assay - weight titration（potentiometric method） 工作基准试剂 含量测定通则 称量电位滴定法 |
China National Standards weight |
English PDF |
| GB/T 709-2006 |
Dimension,shape,weight and tolerances for hot-rolled steel plates and sheets 热轧钢板和钢带的尺寸、外形、重量及允许偏差 |
China National Standards weight |
English PDF |
| GB/T 708-2006 |
Dimension,shape,weight and tolerance for cold-rolled steel plates and sheets 冷轧钢板和钢带的尺寸、外形、重量及允许偏差 |
China National Standards weight |
English PDF |
| GB/T 20624.2-2006 |
Paints and varnishes - Rapid-deformation(impact resistance) tests - Part 2: Falling-weight test,small-area indenter 色漆和清漆 快速变形(耐冲击性)试验 第2部分：落锤试验（小面积冲头） |
China National Standards weight |
English PDF |
| GB/T 20624.1-2006 |
Paints and varnishes - Rapid-deformation(impact resistance) tests - Part 1: Falling-weight test,large-area inderter 色漆和清漆 快速变形(耐冲击性)试验 第1部分：落锤试验（大面积冲头) |
China National Standards weight |
English PDF |
| GB/T 19889.8-2006 |
Acoustics―Measurement of sound insulation in buildings and of building elements―Part 8 :Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor 声学 建筑和建筑构件隔声测量 第8部分：重质标准楼板覆面层撞击声改善量的实验室测量 |
China National Standards weight |
English PDF |
| GB/T 6509-2005 |
Method for determination on of low molecular weight compounds content in chip and fibles of polycaproamide 聚己内酰胺切片和纤维中低分子物含量的测定方法 |
China National Standards weight |
English PDF |
| GB/T 19701.2-2005 |
Implants for surgery Ultra-high molecular weight polyethylene-part 2:Moulded forms 外科植入物 超高分子量聚乙烯 第2部分:模塑料 |
China National Standards weight |
English PDF |
| GB/T 19701.1-2005 |
Implants for surgery-Ultra-high molecular weight polyethylene part 1:powder form 外科植入物 超高分子量聚乙烯 第1部分:粉料 |
China National Standards weight |
English PDF |
| GB/T 10335.2-2005 |
Coated paper and board-Light weight coated paper 涂布纸和纸板 轻量涂布纸 |
China National Standards weight |
English PDF |
| GB/T 19631-2005 |
Glassfiber reinforced cement lightweight hollow panel for partition 玻璃纤维增强水泥轻质多孔隔墙条板 |
China National Standards weight |
English PDF |
| GB/T 19599.1-2004 |
Testing method for fishing nets of synthetic fibre--weight of netting 合成纤维渔网片试验方法 网片重量 |
China National Standards weight |
English PDF |
| GB/T 19113-2003 |
Classification of mulberry silkworm fresh cocoons (Method of dry weight of the cocoons layer) 桑蚕鲜茧分级(干壳量法) |
China National Standards weight |
English PDF |
| GB/T 6728-2002 |
Cold formed steel hollow sections for general structure--Dimensions，shapes，weight and permissible deviations 结构用冷弯空心型钢 尺寸、外形、重量及允许偏差 |
China National Standards weight |
English PDF |
| GB/T 2930.9-2001 |
Rules for forage seed testing--weight determination 牧草种子检验规程 重量测定 |
China National Standards weight |
English PDF |
| GB/T 7584.2-1999 |
Acoustics--Hearing protectors--Part 2:Estimation of effective A-weighted sound pressure levels when hearing protectors are worn 声学 护听器 第2部分:戴护听器时有效的A计权声压级估算 |
China National Standards weight |
English PDF |
| GB/T 3301-1999 |
Standard method for measurement of volume，rim diameter allowance， hight allowance， weight allowance and size of defects of domestic ceramic ware 日用陶瓷的容积、口径误差、高度误差、重量误差、缺陷尺寸的测定方法 |
China National Standards weight |
English PDF |
| GB/T 905-1994 |
Dimension，shape，weight and tolerance for cold-drawn round，square and hexagonal steels 冷拉圆钢、方钢、六角钢尺寸、外形、重量及允许偏差 |
China National Standards weight |
English PDF |
| GB/T 14153-1993 |
General test method for impact resistance of rigid plastics by means of falling weight 硬质塑料落锤冲击试验方法 通则 |
China National Standards weight |
English PDF |
| GB/T 12005.10-1992 |
Determination for molecular weight of polyacrylamide by viscometry 聚丙烯酰胺分子量测定 粘度法 |
China National Standards weight |
English PDF |
| GB/T 13675-1992 |
Light weight gas turbines preparation for shipping and installation 轻型燃气轮机运输与安装 |
China National Standards weight |
English PDF |
| GB/T 13674-1992 |
Applied specification of fuels for light weight gas turbine 轻型燃气轮机燃料使用规范 |
China National Standards weight |
English PDF |
| GB/T 13354-1992 |
Test method for density of adhesives in fluid form--Method of weight cup 液态胶粘剂密度的测定方法 重量杯法 |
China National Standards weight |
English PDF |
| GB/T 12674-1990 |
Motor vehicles--weight parameter--Measuringmethod 汽车质量(重量)参数测定方法 |
China National Standards weight |
English PDF |
| GB/T 11848.8-1989 |
Determination of moisture in uranium ore concentrate--Loss of weight at 110℃ 铀矿石浓缩物中水分的测定 110℃下失重法 |
China National Standards weight |
English PDF |
| GB/T 11579-1989 |
Light weight type anchors 轻量型锚 |
China National Standards weight |
English PDF |
| GB/T 11548-1989 |
Standard test method for impact resistance of rigid plastic sheeting by means of a tup (falling weight) 硬质塑料板材耐冲击性能试验方法 (落锤法) |
China National Standards weight |
English PDF |
| GB/T 6598-1986 |
Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method 小角激光光散射法测定聚苯乙烯标准样品的重均分子量 |
China National Standards weight |
English PDF |
| GB/T 3660-1983 |
Unified weighting network for measuring video continuous random noise 测量视频连续随机杂波用的统一加权网络 |
China National Standards weight |
English PDF |
| Find out:108Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
