Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| HB 8626-2021 |
Airborne temperature sensor performance test requirements: static indication error, recovery characteristics, dynamic response and temperature measurement deviation {译} 机载温度传感器性能测试要求 静态示值误差、恢复特性、动态响应与测温偏差 |
China Aviation Industry
Standards Performance requirements test |
 English PDF |
| HB 8618-2021 |
Performance testing requirements for fiber Bragg grating strain sensors used in aviation {译} 航空用光纤光栅应变传感器性能测试要求 |
China Aviation Industry
Standards Performance requirements test |
English PDF |
| HB 8582-2020 |
Low-speed wind tunnel pressure test requirements for airfoil aerodynamic performance {译} 翼型气动性能低速风洞测压试验要求 |
China Aviation Industry
Standards Performance requirements test |
English PDF |
| HB 8498-2014(2017) |
Civil aircraft landing gear system performance test verification requirements {译} 民用飞机起落架系统性能试验验证要求 |
China Aviation Industry
Standards Performance requirements test |
English PDF |
| JT/T 1459-2023 |
Performance requirements and test procedures for low-speed following system of commercial vehicles {译} 营运车辆低速跟随系统性能要求和测试规程 |
China Transport Industry
Standards Performance requirements test |
English PDF |
| QC/T 1168-2022 |
Performance requirements and bench test methods of electric air compressors for automobiles {译} 汽车用电动空气压缩机性能要求及台架试验方法 |
China Automobile Industry
Standards Performance requirements test |
English PDF |
| QC/T 1172-2022 |
Performance requirements and bench test methods for exhaust mufflers used in automotive air brake components {译} 汽车气压制动部件用排气消音器性能要求及台架试验方法 |
China Automobile Industry
Standards Performance requirements test |
English PDF |
| YD/T 4156-2022 |
Performance requirements and test methods for chargers for mobile communication handsets {译} 移动通信手持机用充电器的性能要求和试验方法 |
China Telecommunication Industry
Standards Performance requirements test |
English PDF |
| YD/T 4155-2022 |
Performance requirements and test methods for lithium-ion battery packs for mobile communication handsets {译} 移动通信手持机用锂离子电池组的性能要求和试验方法 |
China Telecommunication Industry
Standards Performance requirements test |
English PDF |
| YD/T 4167.1-2022 |
5G Mobile Network Packet Data Service Charging System Charging Performance Technical Requirements and Test Methods Part 1: NSA Architecture {译} 5G移动网分组数据业务计费系统计费性能技术要求和测试方法 第1部分：NSA架构 |
China Telecommunication Industry
Standards Performance requirements test |
English PDF |
| YD/T 2308-2022 |
Transmission performance requirements and test methods for vehicle-mounted narrowband voice communication equipment {译} 车载窄带语音通信设备传输性能要求和测试方法 |
China Telecommunication Industry
Standards Performance requirements test |
English PDF |
| YD/T 4137-2022 |
Functions, performance requirements and test methods of home 4K high-definition IPTV set-top box WLAN and other same-frequency or similar-frequency wireless transmission based on telecommunication network {译} 基于电信网的家庭4K高清IPTV机顶盒WLAN和其他同频率或相近频率无线传输的功能、性能要求和测试方法 |
China Telecommunication Industry
Standards Performance requirements test |
English PDF |
| JT/T 1447-2022 |
Performance requirements and test procedures for low-speed driving assistance systems of commercial vehicles {译} 营运车辆低速驾驶辅助系统性能要求和测试规程 |
China Transport Industry
Standards Performance requirements test |
English PDF |
| JT/T 1446-2022 |
Performance requirements and testing methods of forward collision mitigation system for commercial vehicles {译} 营运车辆前向碰撞减缓系统性能要求和检测方法 |
China Transport Industry
Standards Performance requirements test |
English PDF |
| JT/T 1428-2022 |
Performance requirements and test procedures for rear collision warning system of commercial vehicles {译} 营运车辆后向碰撞预警系统性能要求和测试规程 |
China Transport Industry
Standards Performance requirements test |
English PDF |
| YD/T 4016-2022 |
Performance requirements and test methods for Wi-Fi 6 interface of home broadband client intelligent gateway based on public telecommunication network {译} 基于公用电信网的家庭用宽带客户智能网关 Wi-Fi 6接口性能要求和测试方法 |
China Telecommunication Industry
Standards Performance requirements test |
English PDF |
| YD/T 4066-2022 |
Mobile terminal image and video anti-shake performance technical requirements and test methods {译} 移动终端图像及视频防抖性能技术要求和测试方法 |
China Telecommunication Industry
Standards Performance requirements test |
English PDF |
| JB/T 14264-2022 |
High temperature sodium battery performance requirements and test methods {译} 高温钠电池性能要求和试验方法 |
China Machinery Industry
Standards Performance requirements test |
English PDF |
| YY 9706.108-2021 |
Medical Electrical Equipment Part 1-8: General Requirements for Basic Safety and Essential Performance Collateral Standard: General Requirements, Tests and Guidelines for Alarm Systems in Medical Electrical Equipment and Medical Electrical Systems {译} 医用电气设备 第1-8部分：基本安全和基本性能的通用要求 并列标准：通用要求,医用电气设备和医用电气系统中报警系统的测试和指南 |
China Pharmaceutics Industry
Standards Performance requirements test |
English PDF |
| YY 9706.102-2021 |
Medical Electrical Equipment Part 1-2: General Requirements for Basic Safety and Essential Performance Collateral Standard: Electromagnetic Compatibility Requirements and Tests {译} 医用电气设备 第1-2部分：基本安全和基本性能的通用要求 并列标准：电磁兼容 要求和试验 |
China Pharmaceutics Industry
Standards Performance requirements test |
English PDF |
| JT/T 1374—2021 |
Performance requirements and test procedures for curve speed warning system for commercial vehicles {译} 营运车辆弯道速度预警系统性能要求和测试规程 |
China Transport Industry
Standards Performance requirements test |
English PDF |
| JB/T 13866-2020 |
Performance requirements and test methods for steering mechanism of three-wheeled vehicles {译} 三轮汽车转向操纵机构性能要求及试验方法 |
China Machinery Industry
Standards Performance requirements test |
English PDF |
| JB/T 13864-2020 |
Three-wheeled vehicles - Braking performance requirements and test methods {译} 三轮汽车 制动性能要求及试验方法 |
China Machinery Industry
Standards Performance requirements test |
English PDF |
| JB/T 13862-2020 |
Three-wheeled vehicles - requirements and test methods for gliding performance {译} 三轮汽车 滑行性能要求及试验方法 |
China Machinery Industry
Standards Performance requirements test |
English PDF |
| YD/T 3787-2020 |
Performance requirements and test methods of WLAN interface for home broadband customer gateway based on public telecommunication network {译} 基于公用电信网的家庭用宽带客户网关 WLAN接口性能要求和测试方法 |
China Telecommunication Industry
Standards Performance requirements test |
English PDF |
| JT/T 1358—2020 |
Performance requirements and test methods for passenger car lane keeping assist systems {译} 客车车道保持辅助系统性能要求和试验方法 |
China Transport Industry
Standards Performance requirements test |
English PDF |
| CY/T 224—2020 |
Bonding performance requirements and testing methods of adhesives for folding cartons {译} 折叠纸盒用胶黏剂粘结性能要求及检验方法 |
China Publication Industry
Standards Performance requirements test |
English PDF |
| QC/T 1067.1-2017 |
(Connectors for automotive wiring harnesses and electrical equipment - Part 1: Definitions, test methods and general performance requirements) 汽车电线束和电气设备用连接器 第1部分：定义、试验方法和一般性能要求 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 1066-2017 |
(Performance requirements and bench test method for cable assembly for car parking brake) 汽车驻车制动用拉索总成性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| SJ/T 11588-2016 |
(BDS / GPS integrated RF and baseband module performance requirements and test methods) bds/gps射频与基带一体化模块性能要求与测试方法 |
China Electronics
Standards Performance requirements test |
English PDF |
| QC/T 307-2016 |
(Automobile vacuum booster performance requirements and test methods of) 汽车用真空助力器性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 29078-2016 |
(Automotive air compressor performance requirements and test methods of) 汽车用空气压缩机性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 1046-2016 |
(Post retarder performance requirements and test methods of commercial vehicles) 商用车辆后置液力缓速器性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| YY/T 0506.2-2016 |
(Patients, staff and equipment with the surgical drapes, gowns and clean air suits - Part 2: Performance requirements and test methods) 病人、医护人员和器械用手术单、手术衣和洁净服 第2部分：性能要求和试验方法 |
China Medicine & Medical Device
Standards Performance requirements test |
English PDF |
| QC/T 1028-2016 |
Performance requirements and test methods of vehicle vacuum check valve 汽车真空单向阀性能要求及试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 648-2015 |
Performance requirements and bench test methods of automotive steering tie rod assy 汽车转向拉杆总成性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 1019-2015 |
Performance requirements and bench test methods of automobile gear shifting control device 汽车变速换档操纵装置性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| YD/T 2980-2015 |
(Fixed network voice service billing system metering performance technical requirements and test methods based on IMS) 基于ims的固定网语音业务计费系统计费性能技术要求和检测方法 |
China Telecommunication
Standards Performance requirements test |
English PDF |
| QC/T 200-2015 |
Performance requirements and test methods of reservoir for air brake equipment of automobile and trailer 汽车和挂车气压制动装置用储气筒性能要求及试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QB/T 4832-2015 |
Technical requirements and test methods of humidity retention performance of household refrigerator 家用电冰箱保湿性能技术要求及试验方法 |
China Light Industry
Standards Performance requirements test |
English PDF |
| YD/T 1328-2015 |
(Digital cellular mobile communication network voice service billing system metering performance technical requirements and test methods) 数字蜂窝移动通信网语音业务计费系统计费性能技术要求和检测方法 |
China Telecommunication
Standards Performance requirements test |
English PDF |
| YD/T 1684-2015 |
(Billing service billing system technical requirements and test methods performance digital cellular mobile communications network to the point of the short message) 数字蜂窝移动通信网点对点短消息业务计费系统计费性能技术要求和检测方法 |
China Telecommunication
Standards Performance requirements test |
English PDF |
| QC/T 1000.2-2015 |
Performance requirements and test methods of non-woven on automotive filter. Part 2: Non-woven of filters for air filter 汽车滤清器用非织布性能要求和测试方法 第2部分：空气滤清器用 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 1000.1-2015 |
Performance requirements and test methods of non-woven on automotive filter. Part 1: Non-woven of filters for passenger compartment 汽车滤清器用非织布性能要求和测试方法 第1部分：乘驾室空气滤清器用 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| YD/T 2789.2-2015 |
(Digital cellular mobile telecommunication network packet data service billing system metering performance technical requirements and test methods - Part 2: CDMA network) 数字蜂窝移动通信网分组数据业务计费系统计费性能技术要求和检测方法 第2部分：cdma网络 |
China Telecommunication
Standards Performance requirements test |
English PDF |
| YD/T 2789.1-2015 |
(Digital cellular mobile telecommunication network packet data service billing system metering performance technical requirements and test methods - Part 1: TD-SCDMA / WCDMA / GSM network) 数字蜂窝移动通信网分组数据业务计费系统计费性能技术要求和检测方法 第1部分：td-scdma/wcdma/gsm网络 |
China Telecommunication
Standards Performance requirements test |
English PDF |
| YD/T 1154-2015 |
(Single-channel fiber amplifier performance requirements and test methods erbium-doped) 单波道用掺铒光纤放大器性能要求和试验方法 |
China Telecommunication
Standards Performance requirements test |
English PDF |
| QC/T 1025-2016 |
Performance requirements and bench test methods of automatic transmission oil pump 自动变速器油泵性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 987-2014 |
Performance requirements and test methods for safety belts retractor of motor vehicles 汽车安全带卷收器性能要求和试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| YD/T 1538-2014 |
(Digital mobile terminal technology audio performance requirements and test methods) 数字移动终端音频性能技术要求及测试方法 |
China Telecommunication
Standards Performance requirements test |
English PDF |
| QC/T 593-2014 |
Performance requirements and bench test methods of automobile hydraulic proportional valve 汽车液压比例阀性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 961-2013 |
Performance requirements and bench test methods of hydraulic brake system plastic reservoir assembly 液压制动系统塑料储液罐性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 959-2013 |
Performance requirements and bench test methods of mechanical parking-brake control lever assembly 机械式驻车制动操纵杆总成性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 958-2013 |
Performance requirements and bench test methods of automobile vacuum pump 汽车真空泵性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 592-2013 |
Performance requirements and Bench test methods for Hydraulic brake caliper assembly 液压制动钳总成性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| YD/T 1883-2013 |
Technical requirements and testing methods for charging performance of voice service of the fixed soft switch network 固定软交换网语音业务计费技术要求和检测方法 |
China Telecommunication
Standards Performance requirements test |
English PDF |
| QC/T 649-2013 |
Motor vehicles. Steering control mechanism. Performance requirements and test methods 汽车转向操纵机构性能要求及试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 647-2013 |
Motor vehicles. Steering universal joint. Performance requirements and test methods 汽车转向万向节总成性能要求及试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 305-2013 |
Motor vehicles. Hydraulic power steering control valve. Performance requirements and test methods 汽车液压动力转向控制阀总成性能要求与试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| AQ 5212-2011 |
Test requirements and methods for safety performance of ventilation and purification equipment 通风净化设备安全性能检测要求及方法 |
China Safety & Security
Standards Performance requirements test |
English PDF |
| QC/T 259-2011 |
Performance requirements and test methods of joint between rim and disc 车轮轮辋与轮辐焊接强度要求及试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| YD/T 2308-2011 |
Transmission performance requirements and test methods for narrowband voice communication devices in vehicle 车载窄带语音通信设备传输性能要求和测试方法 |
China Telecommunication
Standards Performance requirements test |
English PDF |
| YD/T 1686-2011 |
Speech quality and transmission performance requirements and testing methods for IP telephony equipment ip电话终端设备语音质量及传输性能技术要求和测试方法 |
China Telecommunication
Standards Performance requirements test |
English PDF |
| YD/T 2327-2011 |
Technical requirements and testing methods for charging performance of ADSL system adsl系统计费技术要求和检测方法 |
China Telecommunication
Standards Performance requirements test |
English PDF |
| SJ/T 11431-2010 |
Performance requirements and test methods for antenna of global positioning system (GPS) receiver gps接收机天线性能要求及测试方法 |
China Electronics
Standards Performance requirements test |
English PDF |
| SJ/T 11428-2010 |
Performance requirements and test methods for GPS receivers OEM board gps接收机oem板性能要求及测试方法 |
China Electronics
Standards Performance requirements test |
English PDF |
| SJ/T 11426-2010 |
Performance requirements and test methods for GPS receivers RF module gps接收机射频模块性能要求及测试方法 |
China Electronics
Standards Performance requirements test |
English PDF |
| YY/T 0817-2010 |
Physical performance requirements and test methods for enteral feeding catheters with a retention balloon 带定位球囊的肠营养导管物理性能要求及试验方法 |
China Medicine & Medical Device
Standards Performance requirements test |
English PDF |
| XF 817-2009 |
Performance requirements and test methods for sprayed inorganic fiber fireproofing materials {译} 喷射无机纤维防火材料的性能要求及试验方法 |
China Fire industry
Standards Performance requirements test |
English PDF |
| SN/T 2128-2008 |
Test methods and requirements of retroreflective performance for import and export retroreflective fabric 进出口逆反射面料逆反射性能的试验方法和要求 |
China Import Export Inspection
Standards Performance requirements test |
English PDF |
| QC/T 564-2008 |
Performance requirements and bench test methods for passenger car brake 乘用车制动器性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 311-2008 |
Performance requirements and bench test methods of automobile brake master cylinder 汽车液压制动主缸 性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 790-2007 |
Performance requirements and bench test methods for brake chamber 制动气室性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 789-2007 |
Performance requirements and bench test methods of automobile electric vortex retarder assembly 汽车电涡流缓速器总成性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 788-2007 |
Performance requirements and bench test methods of automobile pedal device 汽车踏板装置性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| DL/T 1070-2007 |
Qualification test methods and requirements for tree retardant performance of medium voltage XLPE power cables 中压交联电缆抗水树性能鉴定试验方法和要求 |
China Electricity & Power
Standards Performance requirements test |
English PDF |
| YY 0331-2006 |
Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze 脱脂棉纱布、脱脂棉粘胶混纺纱布的性能要求和试验方法 |
China Medicine & Medical Device
Standards Performance requirements test |
English PDF |
| YD/T 1429-2006 |
Performance requirements and Testing Methods for Lightning Protection system of Running Telecommunication Stations/Sites 通信局(站)在用防雷系统的技术要求和检测方法 |
China Telecommunication
Standards Performance requirements test |
English PDF |
| QC/T 243-2004 |
Performance requirements and test methods of automobile wheeldisc base planeness 汽车车轮安装平面度要求及检验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| XF 495-2004 |
Performance requirements and test methods for flame retardant floor coverings {译} 阻燃铺地材料性能要求和试验方法 |
China Fire industry
Standards Performance requirements test |
English PDF |
| QC/T 417.2-2001 |
Car wiring harness connector of the second part of the test methods and general performance requirements (motorcycle parts) 车用电线束插接器 第2部分 试验方法和一般性能要求（摩托车部分） |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 417.1-2001 |
Vehicle wiring harness connector Part 1 Definitions, test methods and general performance requirements (auto parts) 车用电线束插接器 第1部分 定义，试验方法和一般性能要求（汽车部分） |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| YD/T 1091-2000 |
Technical requirements and test methods of interface and transmission performance for 56kbit/s modem 56kbit/s调制解调器接口及传输性能技术要求和测试方法 |
China Telecommunication
Standards Performance requirements test |
English PDF |
| QC/T 650-2000 |
Automotive the Steering Rod Ball pin performance requirements and test methods 汽车转向拉杆球头销性能要求及试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 216-1996 |
(Performance requirements and test methods for automobile carpet) 汽车用地毯的性能要求和试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| QC/T 49-1993 |
(Vehicle safety performance requirements and test methods) 汽车安全性能要求和试验方法 |
China Automobile & Vehicle industry
Standards Performance requirements test |
English PDF |
| JG/T 5044-1993 |
Hydraulic excavators -- Performance requirements and test procedures for braking systems |
China Building & Construction
Standards Performance requirements test |
English PDF |
| SJ/T 10206-1991 |
Performance requirements and test methods for VHF ground-to-air communication receivers for air traffic control 空中交通管制超短波地空通信接收机性能要求和测量方法 |
China Electronics
Standards Performance requirements test |
English PDF |
| SJ/T 10190-1991 |
Performance requirements and test methods for airborne radio compass 机载无线电罗盘性能要求和测量方法 |
China Electronics
Standards Performance requirements test |
English PDF |
| SJ/T 10189-1991 |
Performance requirements and test methods for airborne OMEGA receiving equipment 机载奥米加接收设备性能要求和试验方法 |
China Electronics
Standards Performance requirements test |
English PDF |
| Find out:90Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
