GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 33962-2017 |
Methods of determination and calculation of heat balance in coke oven 焦炉热平衡测试与计算方法 |
China National Standards |
English PDF |
GB/T 33960-2017 |
Aluminum and aluminum alloy welding wires for pressure vessel 压力容器焊接用铝及铝合金线材 |
China National Standards |
English PDF |
GB/T 33963-2017 |
Steel plates and sheets for truck carriage 载重汽车车厢厢体用钢板和钢带 |
China National Standards |
English PDF |
GB/T 33961-2017 |
Technical specification for wastewater treatment of coking 炼焦废水处理技术规范 |
China National Standards |
English PDF |
GB/T 33958-2017 |
Wire rods for pipe line steel SAW electrodes 管线钢埋弧焊丝用钢盘条 |
China National Standards |
English PDF |
GB/T 33966-2017 |
Seamless abrasion-resistant steel pipes for mortar service 输送砂浆用耐磨无缝钢管 |
China National Standards |
English PDF |
GB/T 33863.8-2017 |
OPC unified architecture—Part 8: Data access OPC统一架构 第8部分:数据访问 |
China National Standards |
English PDF |
GB/T 33900-2017 |
Application attribute protocol for instrument of industrial internet of things 工业物联网仪表应用属性协议 |
China National Standards |
English PDF |
GB/T 20818.10-2017 |
Industrial-process measurement and control—data structures and elements in process equipment catalogues—Part 10: Lists of properties(LOPs) for industrial-process measurement and control electronic data exchange fundamentals—Fundamentals 工业过程测量和控制 在过程设备目录中的数据结构和元素 第10部分:用于工业过程测量和控制电子数据交换的属性列表(LOPs) 基本原则 |
China National Standards |
English PDF |
GB/T 33899-2017 |
Interoperating protocol for instrument of industrial internet of things 工业物联网仪表互操作协议 |
China National Standards |
English PDF |
GB/T 33863.6-2017 |
OPC unified architecture—Part 6: Mapping OPC统一架构 第6部分:映射 |
China National Standards |
English PDF |
GB/T 33863.3-2017 |
OPC unified architecture—Part 3:Address space model OPC统一架构 第3部分:地址空间模型 |
China National Standards |
English PDF |
GB/T 33904-2017 |
Service protocol for instrument of industrial internet of things 工业物联网仪表服务协议 |
China National Standards |
English PDF |
GB/T 15670.21-2017 |
Toxicological test methods for pesticides registration—Part 21: Unscheduled DNA synthesis (UDS) test with mammalian liver cells in vivo 农药登记毒理学试验方法 第21部分:体内哺乳动物肝细胞程序外DNA合成(UDS)试验 |
China National Standards |
English PDF |
GB/T 15670.18-2017 |
Toxicological test methods for pesticides registration—Part 18: Rodent dominant lethal test 农药登记毒理学试验方法 第18部分:啮齿类动物显性致死试验 |
China National Standards |
English PDF |
GB/T 15670.3-2017 |
Toxicological test methods for pesticides registration—Part 3: Acute oral toxicity test—Up-and-down-procedure 农药登记毒理学试验方法 第3部分:急性经口毒性试验 序贯法 |
China National Standards |
English PDF |
GB/T 34028-2017 |
Valve stem reciprocating seals of engine and performance test method 发动机气门导杆往复油封及性能试验方法 |
China National Standards |
English PDF |
GB/T 18762-2017 |
Specification for filler brazing materials made of precious metal and their alloy 贵金属及其合金钎料规范 |
China National Standards |
English PDF |
GB/T 33946-2017 |
Copper alloy profile,bar for the electromagnetic launch assembly 电磁推射装置用铜合金型、棒材 |
China National Standards |
English PDF |
GB/T 33948.2-2017 |
Method for chemical analysis of copper-steel composite metal—Part 2:Determination of zinc content—Na2EDTA titration method 铜-钢复合金属化学分析方法 第2部分:锌含量的测定 Na2EDTA滴定法 |
China National Standards |
English PDF |
GB/T 33945-2017 |
Rods of chromium zirconium copper for engine commutator 电机整流子换向片用铬锆铜棒材 |
China National Standards |
English PDF |
GB/T 33965-2017 |
Metallic materials—Tensile testing—Determination of thickness reduction ratio for rectangular specimen 金属材料 拉伸试验 矩形试样减薄率的测定 |
China National Standards |
English PDF |
GB/T 33964-2017 |
Wire rods for welding solid electrodes of atmospheric corrosion resisting steels 耐候钢实心焊丝用钢盘条 |
China National Standards |
English PDF |
GB/T 33967-2017 |
Wire rods for conversion to wire without intermediate heat treatment 免铅浴淬火钢丝用热轧盘条 |
China National Standards |
English PDF |
GB/T 33969-2017 |
Technical specification for injecting pulverized coal with oxygen-enriched into blast furnace 高炉富氧喷煤技术规范 |
China National Standards |
English PDF |
GB/T 33970-2017 |
Al2O3 dispersion strengthened copper sheet for resistance welding electrode 电阻焊电极用Al2O3弥散强化铜片材 |
China National Standards |
English PDF |
GB/T 33974-2017 |
Hot rolling checker steel sheet and strip 热轧花纹钢板及钢带 |
China National Standards |
English PDF |
GB/T 33968-2017 |
Hot rolled steel sections with improved weldability 改善焊接性能热轧型钢 |
China National Standards |
English PDF |
GB/T 33972-2017 |
Hot rolled steel sheet and strip for bogie frame of high-speed train 高速列车转向架构架用热轧钢板及钢带 |
China National Standards |
English PDF |
GB/T 33976-2017 |
Corrosion resistant hot rolled section steel for cargo oil tanks 原油船货油舱用耐腐蚀热轧型钢 |
China National Standards |
English PDF |
GB/Z 33902-2017 |
Measurement of fluid flow by means of pressure differential devices—Guidelines on the effect of departure from the specifications and operating conditions given in GB/T 2624 and the correction methods 使用差压装置测量流体流量 偏离GB/T2624给出的要求和工作条件的影响及其修正方法 |
China National Standards |
English PDF |
GB/T 33905.3-2017 |
Intelligent sensor—Part 3: Terminology 智能传感器 第3部分:术语 |
China National Standards |
English PDF |
GB/T 33901-2017 |
Identifier protocol for instrument of industrial internet of things 工业物联网仪表身份标识协议 |
China National Standards |
English PDF |
GB/T 33903-2017 |
Automatic solar tracker of shading ball model for diffuse radiation measurement 散射辐射测量用遮光球式全自动太阳跟踪器 |
China National Standards |
English PDF |
GB/T 33907-2017 |
Electrolytic solid moisture meter 电解法固体水分测量仪 |
China National Standards |
English PDF |
GB/T 33863.4-2017 |
OPC unified architecture—Part 4: Services OPC统一架构 第4部分:服务 |
China National Standards |
English PDF |
GB/T 33906-2017 |
Large-scale electronic flash apparatus for photographic purposes 摄影用大型电子闪光装置 |
China National Standards |
English PDF |
GB/T 13477.15-2017 |
Test method for building sealants—Part 15:Determination of adhesion/cohesion properties after exposure to heat and artificial light through glass and to water 建筑密封材料试验方法 第15部分:经过热、透过玻璃的人工光源和水曝露后粘结性的测定 |
China National Standards |
English PDF |
GB/T 33807-2017 |
Detection of genetically modified components in maize—Gene chip method 玉米中转基因成分的测定 基因芯片法 |
China National Standards |
English PDF |
GB/T 13477.11-2017 |
Test method for building sealants—Part 11:Determination of tensile properties at maintained extension after immersion in wates 建筑密封材料试验方法 第11部分:浸水后定伸粘结性的测定 |
China National Standards |
English PDF |
GB/T 33806-2017 |
Technical requirement of area fluorescent imaging microarray scanner 面阵荧光成像微阵列芯片扫描仪技术要求 |
China National Standards |
English PDF |
GB/T 33805-2017 |
Technical requirement of laser confocal biochip scanner 激光共聚焦生物芯片扫描仪技术要求 |
China National Standards |
English PDF |
GB/T 33841.1-2017 |
Specification for energy-efficient operation of refrigerating system—Part 1:Ammonia refrigerating system 制冷系统节能运行规程 第1部分:氨制冷系统 |
China National Standards |
English PDF |
GB/T 33855-2017 |
General requirements for maternal and infant health care service place 母婴保健服务场所通用要求 |
China National Standards |
English PDF |
GB/T 33973-2017 |
Guides for energy efficiency assessment of raw material yard of iron and steel enterprise 钢铁企业原料场能效评估导则 |
China National Standards |
English PDF |
GB/T 33971-2017 |
Hot rolled wide strips for coal slurry line pipe 煤浆输送管用热轧宽钢带 |
China National Standards |
English PDF |
GB/T 34020.1-2017 |
Double wall copper-brazed steel tubes—Part 1:Tubing system for refrigerator 双层卷焊钢管 第1部分:冰箱管路系统用管 |
China National Standards |
English PDF |
GB/T 33975-2017 |
Hot-rolled spring steel wire rod for high-speed railway fastener 高速铁路扣件用弹簧钢热轧盘条 |
China National Standards |
English PDF |
GB/T 34020.2-2017 |
Double wall copper-brazed steel tubes—Part 2:Tubing system for automobiles 双层卷焊钢管 第2部分:汽车管路系统用管 |
China National Standards |
English PDF |
GB/T 34020.3-2017 |
Double wall copper-brazed steel tubes—Part 3: Tubing system for air conditioner and refrigeration 双层卷焊钢管 第3部分:空调和制冷设备管路系统用管 |
China National Standards |
English PDF |
GB/T 33879-2017 |
Multi-way precision die forgings—General specification 多向精密模锻件 通用技术条件 |
China National Standards |
English PDF |
GB/T 33877-2017 |
Non-destructive testing—Test method for comparing the brightness of fluorescent penetrants 无损检测 荧光渗透剂亮度测定方法 |
China National Standards |
English PDF |
GB/T 22381-2017 |
Cable connections between gas-insulated metal-enclosed switchgear for rated voltages equal to and above 72.5kV and fluid-filled and extruded insulation power cables—Fluid-filled and dry type cable-terminations 额定电压72.5kV及以上气体绝缘金属封闭开关设备与充流体及挤包绝缘电力电缆的连接 充流体及干式电缆终端 |
China National Standards |
English PDF |
GB/T 22382-2017 |
Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above 额定电压72.5 kV 及以上气体绝缘金属封闭开关设备与电力变压器之间的直接连接 |
China National Standards |
English PDF |
GB/T 33977-2017 |
Methods to quantify the steady state, power-frequency electrimagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations 高压成套开关设备和高压/低压预装式变电站产生的稳态、工频电磁场的量化方法 |
China National Standards |
English PDF |
GB/T 16499-2017 |
Guide for the preparation of electrical and electronic safety publications and the use of basic safety publications and group safety publications 电工电子安全出版物的编写及基础安全出版物和多专业共用安全出版物的应用导则 |
China National Standards |
English PDF |
GB/T 33840-2017 |
General technical requirement for water jacket furnace 水套加热炉通用技术要求 |
China National Standards |
English PDF |
GB/T 16611-2017 |
General specification for radio data transmission transceiver 无线数据传输收发信机通用规范 |
China National Standards |
English PDF |
GB/T 33778-2017 |
RF technical requirements and testing methods for the wireless transceiver of video monitoring system 视频监控系统无线传输设备射频技术指标与测试方法 |
China National Standards |
English PDF |
GB/T 33783-2017 |
Testing guideline for programmable logic device software 可编程逻辑器件软件测试指南 |
China National Standards |
English PDF |
GB/T 33784-2017 |
Specification of programmable logic device software documentation 可编程逻辑器件软件文档编制规范 |
China National Standards |
English PDF |
GB/T 33781-2017 |
General requirements for programmable logic device software development 可编程逻辑器件软件开发通用要求 |
China National Standards |
English PDF |
GB/T 33780.1-2017 |
Technical specification of electronic government common platform based on cloud computing—Part 1: System architecture 基于云计算的电子政务公共平台技术规范 第1部分:系统架构 |
China National Standards |
English PDF |
GB/T 16462.3-2017 |
Test conditions for numerically controlled turning machines and turning centres—Part 3: Geometric tests for machines with inverted vertical work-holding spindles 数控车床和车削中心检验条件 第3部分:倒置立式机床几何精度检验 |
China National Standards |
English PDF |
GB/T 33878-2017 |
Steel cross wedge rollings—Technological design principle 钢质楔横轧件 工艺编制原则 |
China National Standards |
English PDF |
GB/T 16462.2-2017 |
Test conditions for numerically controlled turning machines and turning centers—Part 2: Geometric tests for machines with a vertical workholding spindle 数控车床和车削中心检验条件 第2部分:立式机床几何精度检验 |
China National Standards |
English PDF |
GB/T 16462.5-2017 |
Test conditions for numerically controlled turning machines and turning centers—Part 5: Accuracy of feeds, speeds and interpolations 数控车床和车削中心检验条件 第5部分:进给率、速度和插补精度检验 |
China National Standards |
English PDF |
GB/T 16462.6-2017 |
Test conditions for numerically controlled turning machines and turning centers—Part 6: Accuracy of a finished test piece 数控车床和车削中心检验条件 第6部分:精加工试件精度检验 |
China National Standards |
English PDF |
GB/T 10180-2017 |
Thermal performance test code for industrial boilers 工业锅炉热工性能试验规程 |
China National Standards |
English PDF |
GB/T 34018-2017 |
Non-destructive testing—Test method for scanning ultrasonic microscopy 无损检测 超声显微检测方法 |
China National Standards |
English PDF |
GB/T 6113.201-2017 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-1: Methods of measurement of disturbances and immunity—Conducted disturbance measurements 无线电骚扰和抗扰度测量设备和测量方法规范 第2-1 部分:无线电骚扰和抗扰度测量方法 传导骚扰测量 |
China National Standards |
English PDF |
GB/T 23751.2-2017 |
Micro fuel cell power systems-Part 2: Performance test methods 微型燃料电池发电系统 第2部分: 性能试验方法 |
China National Standards |
English PDF |
GB/T 33979-2017 |
Test methods for proton exchange membrane fuel cell power system at subzero environment 质子交换膜燃料电池发电系统低温特性测试方法 |
China National Standards |
English PDF |
GB/T 33978-2017 |
Proton exchange membrane fuel cell modules for road vehicles 道路车辆用质子交换膜燃料电池模块 |
China National Standards |
English PDF |
GB/T 3787-2017 |
Technical safety code for management, operation, inspection and maintenance of hand-held motor-operated electric tools 手持式电动工具的管理、使用、检查和维修安全技术规程 |
China National Standards |
English PDF |
GB/T 2674-2017 |
Hexalobular socket raised countersunk head screws 内六角花形半沉头螺钉 |
China National Standards |
English PDF |
GB/T 33844-2017 |
Information technology—Biometrics—Tenprint capture using biometric application programming interface(BioAPI) 信息技术 生物特征识别 用于生物特征十指指纹采集应用编程接口(BioAPI) |
China National Standards |
English PDF |
GB/T 30269.1001-2017 |
Information technology--Sensor network—Part 1001: Middleware: Sensor networks node interfaces 信息技术 传感器网络 第1001部分:中间件:传感器网络节点接口 |
China National Standards |
English PDF |
GB/T 33842.2-2017 |
Information technology—Conformance testing methodology for biometric data interchange formats defined in GB/T 26237—Part 2: Finger minutiae data 信息技术 GB/T 26237中定义的生物特征数据交换格式的符合性测试方法 第2部分:指纹细节点数据 |
China National Standards |
English PDF |
GB/T 33782-2017 |
Information technology—Learning, education and training—Educational management general codes 信息技术 学习、教育和培训 教育管理基础代码 |
China National Standards |
English PDF |
GB/T 33843-2017 |
Test method for access network equipment—Passive optical network based on ethernet(EPON) 接入网设备测试方法 基于以太网方式的无源光网络(EPON) |
China National Standards |
English PDF |
GB/T 33842.4-2017 |
Information technology—Conformance testing methodology for biometric data interchange formats defined in GB/T 26237—Part 4: Finger image data 信息技术 GB/T 26237中定义的生物特征数据交换格式的符合性测试方法 第4部分:指纹图像数据 |
China National Standards |
English PDF |
GB/T 23001-2017 |
Integration of informatization and industrialization management systems—Requirements 信息化和工业化融合管理体系 要求 |
China National Standards |
English PDF |
GB/T 23000-2017 |
Integration of informatization and industrialization management systems—Fundamentals and vocabulary 信息化和工业化融合管理体系 基础和术语 |
China National Standards |
English PDF |
GB/T 30240.5-2017 |
Guidelines for the use of English in public service areas—Part 5: Sports 公共服务领域英文译写规范 第5部分:体育 |
China National Standards |
English PDF |
GB/T 30240.10-2017 |
Guidelines for the use of English in public service areas—Part 10: Commerce and finance 公共服务领域英文译写规范 第10部分:商业金融 |
China National Standards |
English PDF |
GB/T 30240.8-2017 |
Guidelines for the use of English in public service areas—Part 8: Post and telecommunications 公共服务领域英文译写规范 第8部分:邮政电信 |
China National Standards |
English PDF |
GB/T 30240.6-2017 |
Guidelines for the use of English in public service areas—Part 6: Education 公共服务领域英文译写规范 第6部分:教育 |
China National Standards |
English PDF |
GB/T 30240.7-2017 |
Guidelines for the use of English in public service areas—Part 7: Health and medicine 公共服务领域英文译写规范 第7部分:医疗卫生 |
China National Standards |
English PDF |
GB/T 33940-2017 |
Safety of machinery—Guide for safety design and lean manufacturing 机械安全 安全设计与精益制造指南 |
China National Standards |
English PDF |
GB/T 73-2017 |
Slotted set screws with flat point 开槽平端紧定螺钉 |
China National Standards |
English PDF |
GB/T 2672-2017 |
Hexalobular socket pan head screws 内六角花形盘头螺钉 |
China National Standards |
English PDF |
GB/T 33941.1-2017 |
Earth-moving machinery—Structure stress test method—Part 1: General principles 土方机械 结构件应力测试方法 第1部分:通则 |
China National Standards |
English PDF |
GB/T 4857.17-2017 |
Packaging—Basic tests for tansport packages—Part 17: General rules for the compilation of performance test 包装 运输包装件基本试验 第17部分:编制性能试验大纲的通用规则 |
China National Standards |
English PDF |
GB/T 21361-2017 |
Motor vehicle air-conditioning unit 汽车用空调器 |
China National Standards |
English PDF |
GB/T 847-2017 |
Cross-recessed raised countersunk (oval) head tapping screws 十字槽半沉头自攻螺钉 |
China National Standards |
English PDF |
GB/T 5282-2017 |
Slotted pan head tapping screws 开槽盘头自攻螺钉 |
China National Standards |
English PDF |
GB/T 2670.3-2017 |
Hexalobular socket raised countersunk (oval) head tapping screws 内六角花形半沉头自攻螺钉 |
China National Standards |
English PDF |
GB/T 33848.1-2017 |
Information technology—Radio frequency identification—Part 1: Reference architecture and definition of parameters to be standardized 信息技术 射频识别 第1部分:参考结构和标准化参数定义 |
China National Standards |
English PDF |
GB/T 33847-2017 |
Information technology—Middleware terminology 信息技术 中间件术语 |
China National Standards |
English PDF |
Find out:53099Items | To Page of: First -Previous-Next -Last | [134] [135] [136] [137] [138] [139] [140] |