Cart:
 |
China GB Standards list issued in 2009 year |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 5584.4-2009 |
Rectangular copper or aluminuium and its alloy wires for electrical purposes - Part 4: Strip copper conductor 电工用铜、铝及其合金扁线 第4部分：铜带 |
China National Standards 2009 |
 English PDF |
| GB/T 5584.3-2009 |
Rectangular copper or aluminium and its alloy wires for electrical purposes - Part 3: Aluminium rectanglar wire 电工用铜、铝及其合金扁线 第3部分：铝扁线 |
China National Standards 2009 |
English PDF |
| GB/T 5584.2-2009 |
Rectangular copper or aluminium and its alloy wires for electrical purposes - Part 2: Rectangular copper wire 电工用铜、铝及其合金扁线 第2部分：铜扁线 |
China National Standards 2009 |
English PDF |
| GB/T 5584.1-2009 |
Rectangular copper or aluminium and its alloy wires for electrical purposes - Part 1: General 电工用铜、铝及其合金扁线 第1部分：一般规定 |
China National Standards 2009 |
English PDF |
| GB/T 4910-2009 |
Tinned round copper wire 镀锡圆铜线 |
China National Standards 2009 |
English PDF |
| GB/T 4909.9-2009 |
Test methods for bare wires - Part 9: Test for continuity of coating - Sodium polysulfide solution method 裸电线试验方法 第9部分：镀层连续性试验 多硫化钠法 |
China National Standards 2009 |
English PDF |
| GB/T 4909.8-2009 |
Test methods for bare wires - Part 8: Hardness test - Brinell hardness test 裸电线试验方法 第8部分：硬度试验 布氏法 |
China National Standards 2009 |
English PDF |
| GB/T 4909.7-2009 |
Test methods for bare wires - Part 7: Mandrel winding test 裸电线试验方法 第7部分：卷绕试验 |
China National Standards 2009 |
English PDF |
| GB/T 4909.6-2009 |
Test methods for bare wires - Part 6: Bend test - Single bend test 裸电线试验方法 第6部分：弯曲试验 单向弯曲 |
China National Standards 2009 |
English PDF |
| GB/T 4909.5-2009 |
Test methods for bare wires - Part 5: Bend test - Reverse bend test 裸电线试验方法 第5部分：弯曲试验 反复弯曲 |
China National Standards 2009 |
English PDF |
| GB/T 4909.4-2009 |
Test methods for bare wires - Part 4: Torsion test 裸电线试验方法 第4部分：扭转试验 |
China National Standards 2009 |
English PDF |
| GB/T 4909.3-2009 |
Test methods for bare wires - Part 3: Tensile test 裸电线试验方法 第3部分：拉力试验 |
China National Standards 2009 |
English PDF |
| GB/T 4909.2-2009 |
Test methods for bare wires - Part 2: Measurement of dimensions 裸电线试验方法 第2部分：尺寸测量 |
China National Standards 2009 |
English PDF |
| GB/T 4909.12-2009 |
Test methods for bare wires - Part 12: Solderability test of coating - Solder globule method 裸电线试验方法 第12部分：镀层可焊性试验-焊球法 |
China National Standards 2009 |
English PDF |
| GB/T 4909.1-2009 |
Test methods for bare wires - Part 1: General 裸电线试验方法 第1部分：总则 |
China National Standards 2009 |
English PDF |
| GB/T 4909.11-2009 |
Test methods for bare wires - Part 11: Test for adherence of coating 裸电线试验方法 第11部分：镀层附着性试验 |
China National Standards 2009 |
English PDF |
| GB/T 4909.10-2009 |
Test methods for bare wires - Part 10: Test for continuity of coating - Ammonium persulphate solution method 裸电线试验方法 第10部分：镀层连续性试验 过硫酸铵法 |
China National Standards 2009 |
English PDF |
| GB/T 4074.8-2009 |
Winding wires - Test methods - Part 8: Test procedure for the determination of the temperature index of enamelled winding wires - Quick-Test method 绕组线试验方法 第8部分：测定漆包绕组线温度指数的试验方法 快速法 |
China National Standards 2009 |
English PDF |
| GB/T 4074.7-2009 |
Winding wires - Test methods - Part 7: Test procedure for the determination of the temperature index of enamelled winding wires 绕组线试验方法 第7部分：测定漆包绕组线温度指数的试验方法 |
China National Standards 2009 |
English PDF |
| GB/T 3955-2009 |
Round aluminium wire for electrical purposes 电工圆铝线 |
China National Standards 2009 |
English PDF |
| GB/T 3953-2009 |
Round copper wire for electrical purposes 电工圆铜线 |
China National Standards 2009 |
English PDF |
| GB/T 23360-2009 |
Method of evaluating the thermal performance of enclosures 机壳热特性的估算方法 |
China National Standards 2009 |
English PDF |
| GB/T 23359-2009 |
Frame-type cabinets for low-voltage switchgear 框架式低压机柜 |
China National Standards 2009 |
English PDF |
| GB/T 23312.7-2009 |
Enamelled round aluminium winding wire - Part 7: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 漆包铝圆绕组线 第7部分：200级聚酯或聚酯亚胺/聚酰胺酰亚胺复合漆包铝圆线 |
China National Standards 2009 |
English PDF |
| GB/T 23312.6-2009 |
Enamelled round aluminium winding wire - Part 6: Polyester or polyesterimide overcoated with polyamide enamelled round aluminium wire, class 180 漆包铝圆绕组线 第6部分：180级聚酯或聚酯亚胺/聚酰胺复合漆包铝圆线 |
China National Standards 2009 |
English PDF |
| GB/T 23312.5-2009 |
Enamelled round aluminium winding wire - Part 5: Polyesterimide enamelled round aluminium wire,class 180 漆包铝圆绕组线 第5部分：180级聚酯亚胺漆包铝圆线 |
China National Standards 2009 |
English PDF |
| GB/T 23312.4-2009 |
Enamelled round aluminium winding wire - Part 4: Polyester enamelled round aluminium wire, class 155 漆包铝圆绕组线 第4部分：155级聚酯漆包铝圆线 |
China National Standards 2009 |
English PDF |
| GB/T 23312.3-2009 |
Enamelled round aluminium winding wire - Part 3: Polyester enamelled round aluminium wire, class 130 漆包铝圆绕组线 第3部分：130级聚酯漆包铝圆线 |
China National Standards 2009 |
English PDF |
| GB/T 23312.2-2009 |
Enamelled round aluminium winding wire - Part 2: Polyvinyl acetal enamelled round aluminium wire, class 120 漆包铝圆绕组线 第2部分：120级缩醛漆包铝圆线 |
China National Standards 2009 |
English PDF |
| GB/T 23312.1-2009 |
Enamelled round aluminium winding wire - Part 1: General requirements 漆包铝圆绕组线 第1部分：一般规定 |
China National Standards 2009 |
English PDF |
| GB/T 23311-2009 |
Aromatic polyimide tape wrapped round copper wire, class 240 240级芳族聚酰亚胺薄膜绕包铜圆线 |
China National Standards 2009 |
English PDF |
| GB/T 23310-2009 |
Aromatic polyimide tape wrapped rectangular copper wire，class 240 240级芳族聚酰亚胺薄膜绕包铜扁线 |
China National Standards 2009 |
English PDF |
| GB/T 23309-2009 |
Aluminium-magnesium alloy wires for shield in cable 电缆屏蔽用铝镁合金线 |
China National Standards 2009 |
English PDF |
| GB/T 23308-2009 |
Aluminium-magnesium-silicon alloy wire for overhead line conductors 架空绞线用铝-镁-硅系合金圆线 |
China National Standards 2009 |
English PDF |
| GB/T 23307-2009 |
Floor socket-outlets for household and similar purposes 家用和类似用途地面插座 |
China National Standards 2009 |
English PDF |
| GB/T 23306-2009 |
Specifications for flameproof three-phase asynchronous motors for use on dispensers （frame size 63 to 100） 燃油加油机用隔爆型三相异步电动机(机座号63～100)技术条件 |
China National Standards 2009 |
English PDF |
| GB/T 23294-2009 |
Abrasion resistant refractory materials 耐磨耐火材料 |
China National Standards 2009 |
English PDF |
| GB/T 23293-2009 |
Nitride bonded refractory products and their mortars 氮化物结合耐火制品及其配套耐火泥浆 |
China National Standards 2009 |
English PDF |
| GB/T 19520.15-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-104部分：基于连接器的插箱和插件的接口尺寸 |
China National Standards 2009 |
English PDF |
| GB/T 19520.14-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-103: Keying and alignment pin 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-103部分：编码键和定位销 |
China National Standards 2009 |
English PDF |
| GB/T 19520.13-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-102: Injector/extractor handle 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-102部分：插拔器手柄 |
China National Standards 2009 |
English PDF |
| GB/T 19520.12-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-101部分：插箱及其插件 |
China National Standards 2009 |
English PDF |
| GB/T 19290.5-2009 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25mm equipment practice - Extended detail specification - Dimensions for subrack 发展中的电子设备构体机械结构模数序列 第2-3部分：分规范 25mm设备构体的接口协调尺寸 扩展的详细规范 插箱、机箱、背板、面板和插件的尺寸 |
China National Standards 2009 |
English PDF |
| GB/T 19290.4-2009 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subrac 发展中的电子设备构体机械结构模数序列 第2-2部分：分规范 25mm设备构体的接口协调尺寸 详细规范 插箱、机箱、背板、面板和插件的尺寸 |
China National Standards 2009 |
English PDF |
| GB/T 17937-2009 |
Aluminium-clad steel wires for electrical purposes 电工用铝包钢线 |
China National Standards 2009 |
English PDF |
| GB/T 17363.2-2009 |
Nondestructive mensuration of gold content in the gold products - Part 2: Method of compositive determine 黄金制品金含量无损测定方法 第2部分：综合测定方法 |
China National Standards 2009 |
English PDF |
| GB/T 17363.1-2009 |
Nondestructive mensuration of gold content in the gold products - Part 1: Method of electron probe microanalysis 黄金制品金含量无损测定方法 第1部分：电子探针微分析法 |
China National Standards 2009 |
English PDF |
| GB/T 17048-2009 |
Hard-drawn aluminium wire for overhead line conductors 架空绞线用硬铝线 |
China National Standards 2009 |
English PDF |
| GB/T 14820-2009 |
High-voltage ignition wires for road vehicles 公路车辆用高压点火电线 |
China National Standards 2009 |
English PDF |
| GB/T 12970.4-2009 |
Flexilbe copper stranded conductors for electrical purposes - Part 4: Copper wires for electric brush 电工软铜绞线 第4部分：铜电刷线 |
China National Standards 2009 |
English PDF |
| GB/T 12970.3-2009 |
Flexible copper stranded conductors for electrical purposes - Part 3: Flexible copper wire for antenna 电工软铜绞线 第3部分：软铜天线 |
China National Standards 2009 |
English PDF |
| GB/T 12970.2-2009 |
Flexible copper stranded conductors for electrical purposes - Part 2: Flexible copper stranded conductors 电工软铜绞线 第2部分：软铜绞线 |
China National Standards 2009 |
English PDF |
| GB/T 12970.1-2009 |
Flexible copper stranded conductors for electrical purposes - Part 1: General requirements 电工软铜绞线 第1部分：一般规定 |
China National Standards 2009 |
English PDF |
| GB/T 11019-2009 |
Nickel coated round copper wire 镀镍圆铜线 |
China National Standards 2009 |
English PDF |
| GB/T 11016.4-2009 |
Plastic or rubber insulated telephone cords - Part 4: Rubber insulated telephone cords 塑料绝缘和橡皮绝缘电话软线 第4部分：橡皮绝缘电话软线 |
China National Standards 2009 |
English PDF |
| GB/T 11016.3-2009 |
Plastic or rubber insulated telephone cords - Part 3: Polypropylene insulated telephone cords 塑料绝缘和橡皮绝缘电话软线 第3部分：聚丙烯绝缘电话软线 |
China National Standards 2009 |
English PDF |
| GB/T 11016.2-2009 |
Plastic or rubber insulated telephone cords - Part 2: Polyvinyl chloride insulated telephone cords 塑料绝缘和橡皮绝缘电话软线 第2部分：聚氯乙烯绝缘电话软线 |
China National Standards 2009 |
English PDF |
| GB/T 11016.1-2009 |
Plastic or rubber insulated telephone cords - Part 1: General 塑料绝缘和橡皮绝缘电话软线 第1部分：一般规定 |
China National Standards 2009 |
English PDF |
| GB 50492-2009 |
Code for design of PET plant 聚酯工厂设计规范 |
China National Standards 2009 |
English PDF |
| GB 50488-2009 |
Code for design of acrylic fibres plant 腈纶工厂设计规范 |
China National Standards 2009 |
English PDF |
| GB/T 8190.11-2009 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bet measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions 往复式内燃机 排放测量 第11部分：非道路移动机械用发动机瞬态工况下气体和颗粒排放物的试验台测量 |
China National Standards 2009 |
English PDF |
| GB/T 6809.7-2009 |
Reciprocating internal combustion engines - Vocabulary of components and systems - Part 7: Governing systems 往复式内燃机 零部件和系统术语 第7部分：调节系统 |
China National Standards 2009 |
English PDF |
| GB/T 6809.6-2009 |
Reciprocating internal combustion engines - Vocabulary of components and systems - Part 6: Lubricating systems 往复式内燃机 零部件和系统术语 第6部分：润滑系统 |
China National Standards 2009 |
English PDF |
| GB/T 6809.1-2009 |
Reciprocating internal combustion engines - Vocabulary of components and systems - Part 1: Structure and external covers 往复式内燃机 零部件和系统术语 第1部分：固定件及外部罩盖 |
China National Standards 2009 |
English PDF |
| GB/T 4759-2009 |
Exhaust silencers for internal combustion engines - Measurement procedure 内燃机排气消声器 测量方法 |
China National Standards 2009 |
English PDF |
| GB/T 23342-2009 |
Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements 往复式内燃机 回弹式绳索起动装置 基本安全要求 |
China National Standards 2009 |
English PDF |
| GB/T 23341.2-2009 |
Turbochargers - Part 2: Test methods 涡轮增压器 第2部分：试验方法 |
China National Standards 2009 |
English PDF |
| GB/T 23341.1-2009 |
Turbochargers - Part 1: General requirements 涡轮增压器 第1部分：一般技术条件 |
China National Standards 2009 |
English PDF |
| GB/T 23340-2009 |
Internal combustion engines - Connecting-rods - Specification 内燃机 连杆 技术条件 |
China National Standards 2009 |
English PDF |
| GB/T 23339-2009 |
Internal combustion engines - Crankshafts - Specification 内燃机 曲轴 技术条件 |
China National Standards 2009 |
English PDF |
| GB/T 23338-2009 |
Internal combustion engines - Charge air coolers - Specification 内燃机 增压空气冷却器 技术条件 |
China National Standards 2009 |
English PDF |
| GB/T 23337-2009 |
Internal combustion engines - Intake and exhaust valves - Specification 内燃机 进、排气门 技术条件 |
China National Standards 2009 |
English PDF |
| GB/T 23333-2009 |
Evaporative air cooler 蒸发式冷风扇 |
China National Standards 2009 |
English PDF |
| GB/T 23332-2009 |
Humidifiers 加湿器 |
China National Standards 2009 |
English PDF |
| GB/T 22792.1-2009 |
Office furniture - Screens - Part 1: Dimensions 办公家具 屏风 第1部分：尺寸 |
China National Standards 2009 |
English PDF |
| GB/T 17804-2009 |
Reciprocating internal combustion engines - Graphical symbols 往复式内燃机 图形符号 |
China National Standards 2009 |
English PDF |
| GB/T 14624.1-2009 |
Test method for colour of offset ink 胶印油墨颜色检验方法 |
China National Standards 2009 |
English PDF |
| GB/T 13217.8-2009 |
Test method for blocking resistance of liquid ink 液体油墨抗粘连检验方法 |
China National Standards 2009 |
English PDF |
| GB/T 13217.7-2009 |
Test method for adhesion to substrate of liquid ink with tape 液体油墨附着牢度检验方法 |
China National Standards 2009 |
English PDF |
| GB/T 13217.2-2009 |
Test method for gloss of liquid ink 液体油墨光泽检验方法 |
China National Standards 2009 |
English PDF |
| GB/T 13217.1-2009 |
Test method for colour of liquid ink 液体油墨颜色检验方法 |
China National Standards 2009 |
English PDF |
| GB 50493-2009 |
Specification for design of combustible gas and toxic gas detection and alarm for petrochemical industry 石油化工可燃气体和有毒气体检测报警设计规范 |
China National Standards 2009 |
English PDF |
| GB 50489-2009 |
Code for Design of General Plot Plan and Transportation of Chemical Industrial Enterprises 化工企业总图运输设计规范 |
China National Standards 2009 |
English PDF |
| GB 50483-2009 |
Code for design of environmental protectin of chemical industry projects 化工建设项目环境保护设计规范 |
China National Standards 2009 |
English PDF |
| GB 50273-2009 |
Code for construction and acceptance of boiler installation engineering 锅炉安装工程施工及验收规范 |
China National Standards 2009 |
English PDF |
| GB 50272-2009 |
Code for construction and acceptance of forging-press equipment installation engineering 锻压设备安装工程施工及验收规范 |
China National Standards 2009 |
English PDF |
| GB 50231-2009 |
General code for construction and acceptance of mechanical equipment installation engineering 机械设备安装工程施工及验收通用规范 |
China National Standards 2009 |
English PDF |
| GB 50495-2009 |
Technical code for solar heating system 太阳能供热采暖工程技术规范 |
China National Standards 2009 |
English PDF |
| GB/T 786.1-2009 |
Fluid power systems and components - Graphic symbols and circuit diagrams - Part 1: Graphic symbols for conventional use and data-processing applications 流体传动系统及元件图形符号和回路图 第1部分：用于常规用途和数据处理的图形符号 |
China National Standards 2009 |
English PDF |
| GB/T 6062-2009 |
Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristic of contact(stylus) instruments 产品几何技术规范（GPS） 表面结构 轮廓法 接触(触针)式仪器的标称特性 |
China National Standards 2009 |
English PDF |
| GB/T 4249-2009 |
Geometrical product specifications(GPS) - Tolerancing principle 产品几何技术规范（GPS） 公差原则 |
China National Standards 2009 |
English PDF |
| GB/T 3505-2009 |
Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters 产品几何技术规范（GPS） 表面结构 轮廓法 术语、定义及表面结构参数 |
China National Standards 2009 |
English PDF |
| GB/T 3177-2009 |
Geometrical product specifications (GPS) - Inspection of plain workpiece sizes 产品几何技术规范（GPS） 光滑工件尺寸的检验 |
China National Standards 2009 |
English PDF |
| GB/T 23935-2009 |
Design of cylindrical helical springs 圆柱螺旋弹簧设计计算 |
China National Standards 2009 |
English PDF |
| GB/T 23934-2009 |
Hot coiled helical compression springs - Technical specifications 热卷圆柱螺旋压缩弹簧 技术条件 |
China National Standards 2009 |
English PDF |
| GB/T 23282-2009 |
Metal forming machinery - Noise measurement method of sound power levels 锻压机械噪声声功率级测量方法 |
China National Standards 2009 |
English PDF |
| GB/T 23281-2009 |
Metal forming machinery -noise measurement method of sound pressure levels 锻压机械噪声声压级测量方法 |
China National Standards 2009 |
English PDF |
| GB/T 23280-2009 |
Open front mechanical power presses - Testing of the accuracy 开式压力机 精度 |
China National Standards 2009 |
English PDF |
| GB/T 23279-2009 |
Sheet-feeding machine 单张纸输纸机 |
China National Standards 2009 |
English PDF |
| GB/T 23253-2009 |
Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics 液压传动 电控液压泵 性能试验方法 |
China National Standards 2009 |
English PDF |
| Find out:3189Items | To Page of: First -Previous-Next -Last | [23] [24] [25] [26] [27] [28] [29] |
+86-755-25831330
