Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 30558-2014 |
Technical textiles classificiation 产业用纺织品分类 |
China National Standards |
 English PDF |
| GB/T 30557-2014 |
Silk―Terminology for defects of woven fabrics 丝绸 机织物疵点术语 |
China National Standards |
English PDF |
| GB/T 30556.7-2014 |
Electromagnetic compatibility―Installation and mitigation guidelines―Degrees of protection provided by enclosures against electromagnetic disturbances (EM code) 电磁兼容 安装和减缓导则 外壳的电磁骚扰防护等级（EM编码） |
China National Standards |
English PDF |
| GB/T 30555-2014 |
Rules for screw expander（unit）thermal acceptance test 螺杆膨胀机（组）性能验收试验规程 |
China National Standards |
English PDF |
| GB/T 30554-2014 |
Terminology of screw expander 螺杆膨胀机 术语 |
China National Standards |
English PDF |
| GB/T 30553-2014 |
High-voltage direct current power transmission using voltage sourced converters 基于电压源换流器的高压直流输电 |
China National Standards |
English PDF |
| GB/T 30552-2014 |
Aluminium alloy wires for conductors of insulated cables 电缆导体用铝合金线 |
China National Standards |
English PDF |
| GB/T 30551-2014 |
Thermal-resistant aluminium alloy wire for overhead line conductor 架空绞线用耐热铝合金线 |
China National Standards |
English PDF |
| GB/T 30550-2014 |
Concentric lay stranded overhead electrical conductors containing one or more gap(s) 含有一个或多个间隙的同心绞架空导线 |
China National Standards |
English PDF |
| GB/T 30549-2014 |
General specification for permanent magnet AC servo motor 永磁交流伺服电动机 通用技术条件 |
China National Standards |
English PDF |
| GB/T 30548-2014 |
Verification method of anthropometric data in clothing field―Obtained by using 3D measurement instrument 服装用人体数据验证方法 用三维测量仪获取的数据 |
China National Standards |
English PDF |
| GB/T 30547-2014 |
Filter resistor for high voltage direct current (HVDC) transmission system 高压直流输电系统滤波器用电阻器 |
China National Standards |
English PDF |
| GB/T 30546-2014 |
Suitability of typical electrical insulating material (EIM) for polymer recycling 典型电气绝缘材料（EIM）对聚合物回收的适用性 |
China National Standards |
English PDF |
| GB/T 30545-2014 |
Constant temperature controls for electrically heated blankets 电热毯恒温控制器 |
China National Standards |
English PDF |
| GB/T 30544.5-2014 |
Nanotechnologies―Vocabulary―Part 5: Nano/bio interface 纳米科技 术语 第5部分：纳米/生物界面 |
China National Standards |
English PDF |
| GB/T 30544.3-2015 |
Nanotechnologies—Vocabulary—Part 3: Carbon nano-objects 纳米科技 术语 第3部分：碳纳米物体 |
China National Standards |
English PDF |
| GB/T 30544.1-2014 |
Nanotechnologies―Vocabulary―Part 1: Core terms 纳米科技 术语 第1部分：核心术语 |
China National Standards |
English PDF |
| GB/T 30543-2014 |
Nanotechnologies―Characterization of single-wall carbon nanotubes using transmission electron microscopy 纳米技术 单壁碳纳米管的透射电子显微术表征方法 |
China National Standards |
English PDF |
| GB/T 30542-2014 |
Document management―Monitoring and verification of information stored on 130 mm optical media 文件管理 130mm光盘存储信息的监测和验证 |
China National Standards |
English PDF |
| GB/T 30541-2014 |
Document management—Electronic content/document management (CDM) data interchange format 文献管理 电子内容/文档管理（CDM）数据交换格式 |
China National Standards |
English PDF |
| GB/T 30540-2014 |
Document management applications―Achiving of electronic data―Computer output microform (COM)/Computer output laser disc (COLD) 文件管理应用 电子数据的存档 计算机输出缩微品（COM）/计算机输出激光光盘（COLD） |
China National Standards |
English PDF |
| GB/T 30539-2014 |
Foreign languages proficiency specifications for international trade personnel 国际贸易业务人员商务外语能力标识规范 |
China National Standards |
English PDF |
| GB/T 30538-2014 |
Document management applications―Quality control for scanning office documents in colour 文件管理应用 办公文件彩色扫描的质量控制 |
China National Standards |
English PDF |
| GB/T 30537-2014 |
Superconductivity―Measurements for bulk high temperature superconductors―Trapped flux density of large grain oxide superconductors 超导电性 块状高温超导体的测量 大晶粒氧化物超导体的俘获磁通密度 |
China National Standards |
English PDF |
| GB/T 30536-2014 |
Document imaging applications―Recommendations for the creation of original documents 文献成像应用 对原始文件制作的建议 |
China National Standards |
English PDF |
| GB/T 30535-2014 |
Scientific and technical reports metadata specifications 科技报告元数据规范 |
China National Standards |
English PDF |
| GB/T 30534-2014 |
Codes and identification of secret level for scientific and technical reports 科技报告保密等级代码与标识 |
China National Standards |
English PDF |
| GB/T 30532-2014 |
All-glass heat pipe domestic solar water heating system 全玻璃热管家用太阳能热水系统 |
China National Standards |
English PDF |
| GB/T 30524-2014 |
Science and technology infrastructure―Registration and management for metadata 科技平台 元数据注册与管理 |
China National Standards |
English PDF |
| GB/T 30523-2014 |
Science and technology infrastructure―Resource core metadata 科技平台 资源核心元数据 |
China National Standards |
English PDF |
| GB/T 30522-2014 |
Science and technology infrastructure―Metadata standardization principle and method 科技平台 元数据标准化基本原则与方法 |
China National Standards |
English PDF |
| GB/T 30521-2014 |
Trade exhibition―Statistics 经济贸易展览会 数据统计 |
China National Standards |
English PDF |
| GB/T 30520-2014 |
Classification and terminology of meetings 会议分类和术语 |
China National Standards |
English PDF |
| GB/T 305-1998 |
Rolling bearings--Snap ring groove and snap ring on outer ring--Dimensions and tolerances 滚动轴承 外圈上的止动槽和止动环 尺寸和公差 |
China National Standards |
English PDF |
| GB/T 30519-2014 |
Determination of hydrocarbon types and benzene in light petroleum distillates and products―Multidimensional gas chromatographic method 轻质石油馏分和产品中烃族组成和苯的测定 多维气相色谱法 |
China National Standards |
English PDF |
| GB/T 30518-2014 |
Determination of dissolved residues of liquefied petroleum gases―High temperature gas chromatographic method 液化石油气中可溶性残留物的测定 高温气相色谱法 |
China National Standards |
English PDF |
| GB/T 30517-2014 |
Test method for free water in liquefied petroleum gas―Visual inspection 液化石油气中游离水的试验 目视法 |
China National Standards |
English PDF |
| GB/T 30516-2014 |
Bitumen with high viscosity and elastic recovery for pavement 高粘高弹道路沥青 |
China National Standards |
English PDF |
| GB/T 30515-2014 |
Petroleum products―Transparent and opaque liquid―Determination of kinematic viscosity and calculation of dynamic viscosity 透明和不透明液体石油产品运动黏度测定法及动力黏度计算法 |
China National Standards |
English PDF |
| GB/T 30514-2014 |
Glass capillary kinematic viscometers―Specifications and operating instructions 玻璃毛细管运动黏度计 规格和操作说明 |
China National Standards |
English PDF |
| GB/T 30513-2014 |
Technical requirements and testing method of tire blow-out monitoring and controlling system for passenger car 乘用车爆胎监测及控制系统技术要求和试验方法 |
China National Standards |
English PDF |
| GB/T 30512-2014 |
Requirements for prohibited substances on automobiles 汽车禁用物质要求 |
China National Standards |
English PDF |
| GB/T 3051-2000 |
Inorganic chemical products for industrial use--General method for determination of chloride content--Mercurimetric method 无机化工产品中氯化物含量测定的通用方法 汞量法 |
China National Standards |
English PDF |
| GB/T 30511-2014 |
Photometric characteristics ofcornering lamps for motor vehicle 汽车用角灯配光性能 |
China National Standards |
English PDF |
| GB/T 30508-2014 |
Ships and marine technology―Hydraulic oil systems―Guidance for grades of cleanliness and flushing 船舶和海上技术 液压油系统 清洁度等级和冲洗导则 |
China National Standards |
English PDF |
| GB/T 30507-2014 |
Ships and marine technology―Lubricating and hydraulic oil systems―Guidance for sampling to determine cleanliness and particle contamination 船舶和海上技术 润滑油系统和液压油系统 颗粒污染物取样和清洁度判定导则 |
China National Standards |
English PDF |
| GB/T 30506-2014 |
Ships and marine technology―Lubricating oil systems―Guidance for grades of cleanliness and flushing 船舶和海上技术 润滑油系统 清洁度等级和冲洗导则 |
China National Standards |
English PDF |
| GB/T 30505-2014 |
Measure method for emission pollutants of exhaust gas of marine incinerator 船用焚烧炉烟气排放测量方法 |
China National Standards |
English PDF |
| GB/T 30504-2014 |
Ships and marine technology―Hydraulic oil systems―Guidance for assembly and flushing 船舶和海上技术 液压油系统 组装和冲洗导则 |
China National Standards |
English PDF |
| GB/T 30503-2014 |
General specification for marine nitrogen gas generator 船用制氮装置通用技术条件 |
China National Standards |
English PDF |
| GB/T 30502-2014 |
Traffic signal controller for lanes on urban road 城市道路车道交通信号控制机 |
China National Standards |
English PDF |
| GB/T 3050-2000 |
Inorganic chemical products for industrial use--General method for determination of chloride content--Potentiometric method 无机化工产品中氯化物含量测定的通用方法 电位滴定法 |
China National Standards |
English PDF |
| GB/T 30501-2014 |
Geological evaluating methods for tight sandstone gas 致密砂岩气地质评价方法 |
China National Standards |
English PDF |
| GB/T 30500-2014 |
Ultrasonic gas flow meter performance online audit―Method using speed of sound checking 气体超声流量计使用中检验 声速检验法 |
China National Standards |
English PDF |
| GB/T 30499-2014 |
Inland navigation vessels―Manually cable fightening winch―Safety requirements and main dimensions 内河船 手动紧缆绞车 安全要求和主要尺寸 |
China National Standards |
English PDF |
| GB/T 30498-2014 |
Small craft—Permanently installed petrol and diesel fuel tanks 小艇 永久性安装的汽油和柴油燃油柜 |
China National Standards |
English PDF |
| GB/T 30497-2014 |
Small craft―Quick release system for trapeze harness 小艇 吊架索具快速释放系统 |
China National Standards |
English PDF |
| GB/T 30496-2014 |
Shipbuilding―Active control units of ships―Vocabulary 造船 船舶主动转向装置 词汇 |
China National Standards |
English PDF |
| GB/T 30495-2014 |
Ships and marine technology―Drawings for fire protection―Indications of fire rating by divisions for ships and high-speed craft 船舶与海上技术 防火图 船舶及高速艇防火等级划分的表示 |
China National Standards |
English PDF |
| GB/T 30494-2014 |
Ship and marine technology—Marine wind vane and anemometers 船舶和海上技术 船用风向风速仪 |
China National Standards |
English PDF |
| GB/T 30493-2014 |
Sea-going vessels and marine technology―Instructions for planning,carrying out and reporting sea trials 船舶和海上技术 海上试验计划、实施与报告的指南 |
China National Standards |
English PDF |
| GB/T 30492-2014 |
Natural gas―Gas chromatographic requirements for hydrocarbon dewpoint caculation 天然气 烃露点计算的气相色谱分析要求 |
China National Standards |
English PDF |
| GB/T 3049-2006 |
Chemical products for industrial use - General method for determination of iron content - 1,10-Phenanthroline spectrophotometric method 工业用化工产品 铁含量测定的通用方法 1，10-菲啰啉分光光度法 |
China National Standards |
English PDF |
| GB/T 30491.1-2014 |
Natural gas—Calculation of thermodynamic properties—Part 1: Gas phase properties for transmission and distribution applications 天然气 热力学性质计算 第1部分：输配气中的气相性质 |
China National Standards |
English PDF |
| GB/T 30490-2014 |
The method for automatic sampling of natural gas 天然气自动取样方法 |
China National Standards |
English PDF |
| GB/T 30489-2014 |
Bodyside entrance systems for urban rail transit vehicle 城市轨道车辆客室侧门 |
China National Standards |
English PDF |
| GB/T 30488-2014 |
Light for survival craft and rescue boats 救生艇筏和救助艇灯 |
China National Standards |
English PDF |
| GB/T 30487-2014 |
Marine life-saving indicating poster 船用安全救生操作指示图 |
China National Standards |
English PDF |
| GB/T 30483-2013 |
Determination of theaflavins in tea-high performance liquid chromatography 茶叶中茶黄素的测定-高效液相色谱法 |
China National Standards |
English PDF |
| GB/T 30482-2013 |
Woodworking machines―Mortising machines with oscillating tool action―Nomenclature 木工机床 振荡式榫槽机 术语 |
China National Standards |
English PDF |
| GB/T 30481-2013 |
Woodworking machines curtain coating machines―Nomenclature 木工机床 涂胶机 术语 |
China National Standards |
English PDF |
| GB/T 30480-2013 |
Woodworking machines―Hand-loading veneering presses for flat surfaces―Nomenclature 木工机床 手动上料平面压机 术语 |
China National Standards |
English PDF |
| GB/T 3048.9-2007 |
Test methods for electrical properties of electric cables and wires - Part 9：Spark test of insulated cores 电线电缆电性能试验方法 第9部分：绝缘线芯火花试验 |
China National Standards |
English PDF |
| GB/T 3048.8-2007 |
Test methods for electrical properties of electric cables and wires - Part 8：AC Voltage test 电线电缆电性能试验方法 第8部分：交流电压试验 |
China National Standards |
English PDF |
| GB/T 3048.7-2007 |
Test methods for electrical properties of electric cables and wires - Part 7: Tracking resistance test 电线电缆电性能试验方法 第7部分：耐电痕试验 |
China National Standards |
English PDF |
| GB/T 3048.5-2007 |
Test methods for electrical properties of electric cables and wires - Part 5：Test of insulation resistance 电线电缆电性能试验方法 第5部分：绝缘电阻试验 |
China National Standards |
English PDF |
| GB/T 3048.4-2007 |
Test methods for electrical properties of electric cables and wires - Part 4: Test of DC resistance of conductors 电线电缆电性能试验方法 第4部分：导体直流电阻试验 |
China National Standards |
English PDF |
| GB/T 3048.3-2007 |
Test methods for electrical properties of electric cables and wires - Part 3：Test of volume resistivity of semi-conducting rubbers and plastics 电线电缆电性能试验方法 第3部分：半导电橡塑材料体积电阻率试验 |
China National Standards |
English PDF |
| GB/T 3048.2-2007 |
Test methods for electrical properties of electric cables and wires - Part 2：Test of electrical resistivity of metallic materials 电线电缆电性能试验方法 第2部分：金属材料电阻率试验 |
China National Standards |
English PDF |
| GB/T 3048.16-2007 |
Test methods for electrical properties of electric cables and wires - Part 16: Surface resistance test 电线电缆电性能试验方法 第16部分：表面电阻试验 |
China National Standards |
English PDF |
| GB/T 3048.14-2007 |
Test methods for electrical properties of electric cables and wires - Part 14: DC voltage test 电线电缆电性能试验方法 第14部分：直流电压试验 |
China National Standards |
English PDF |
| GB/T 3048.13-2007 |
Test methods for electrical properties of electric cables and wires - Part 13：Impulse voltage test 电线电缆电性能试验方法 第13部分：冲击电压试验 |
China National Standards |
English PDF |
| GB/T 3048.12-2007 |
Test methods for electrical properties of electric cables and wires - Part 12：Partial discharge test 电线电缆电性能试验方法 第12部分：局部放电试验 |
China National Standards |
English PDF |
| GB/T 3048.1-2007 |
Test methods for electrical properties of electric cables and wires - Part 1: General 电线电缆电性能试验方法 第1部分：总则 |
China National Standards |
English PDF |
| GB/T 3048.11-2007 |
Test methods for electrical properties of electric cables and wires - Part 11: Test for dielectric dissipation factor 电线电缆电性能试验方法 第11部分：介质损耗角正切试验 |
China National Standards |
English PDF |
| GB/T 3048.10-2007 |
Test methods for electrical properties of electric cables and wires - Part 10：Spark test of extruded protective sheaths 电线电缆电性能试验方法 第10部分：挤出护套火花试验 |
China National Standards |
English PDF |
| GB/T 30479-2013 |
Woodworking machines―Crosswise veneer splicing machines―Nomenclature 木工机床 横向拼板机 术语 |
China National Standards |
English PDF |
| GB/T 30478-2013 |
Woodworking machines―Circular sawing machines for building sites―Nomenclature 木工机床 建筑工地用圆锯机 术语 |
China National Standards |
English PDF |
| GB/T 30477-2013 |
Wookworking machines―Double edging precision circular sawing machines―Nomenclature and acceptance conditions 木工机床 双修边精密圆锯机 术语和精度 |
China National Standards |
English PDF |
| GB/T 30476-2013 |
Woodworking machines―Single chain mortising machines―Nomenclature and acceptance conditions 木工机床 链式单轴榫槽机 术语和精度 |
China National Standards |
English PDF |
| GB/T 30475.2-2013 |
Filters for compressed air― Test methods―Part 2: Oil vapours 压缩空气过滤器 试验方法 第2部分:油蒸气 |
China National Standards |
English PDF |
| GB/T 30475.1-2013 |
Filters for compressed air―Test methods―Part 1: Oil aerosols 压缩空气过滤器 试验方法 第1部分：悬浮油 |
China National Standards |
English PDF |
| GB/T 30474.2-2013 |
Holding fixtures of cylindrical abrasive sleeves―Part 2: Holding fixtures for stationary machines 筒形砂套夹紧装置 第2部分：用于固定式磨削机上的夹紧装置 |
China National Standards |
English PDF |
| GB/T 30474.1-2013 |
Holding fixtures of cylindrical abrasive sleeves―Part 1: Holding fixtures with shank for hand-held grinding machines 筒形砂套夹紧装置 第1部分：用于手持式磨削机上的带轴夹紧装置 |
China National Standards |
English PDF |
| GB/T 30473-2013 |
Coated abrasives―Cylindrical abrasive sleeves 涂附磨具 筒形砂套 |
China National Standards |
English PDF |
| GB/T 30472-2013 |
Technical specification of complete sets of feed processing equipment 饲料加工成套设备技术规范 |
China National Standards |
English PDF |
| GB/T 30471-2013 |
Equipment for manure utilization of large scale pig farm―Channel type turner 规模养猪场粪便利用设备 槽式翻抛机 |
China National Standards |
English PDF |
| GB/T 30470-2013 |
Superabrasives―Diamond wire saw 超硬磨料制品 金刚石绳锯 |
China National Standards |
English PDF |
| GB/T 3047.8-1996 |
Series of basic dimension of narrow cabinets for vertical increment of 44.45mm 高度进制为44.45mm的窄柜基本尺寸系列 |
China National Standards |
English PDF |
| GB/T 3047.6-2007 |
Series of basic dimensions of cases for electronic equipment 电子设备台式机箱基本尺寸系列 |
China National Standards |
English PDF |
| Find out:53099Items | To Page of: First -Previous-Next -Last | [276] [277] [278] [279] [280] [281] [282] |
+86-755-25831330
