Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 35663-2017 |
Basic terminology of weather forecast 天气预报基本术语 |
China National Standards si |
 English PDF |
| GB/T 35160.4-2017 |
Test methods for agglomerated stone—Part 4：Determination of abrasion resistance 合成石材试验方法 第4部分：耐磨性的测定 |
China National Standards si |
English PDF |
| GB/T 35160.6-2017 |
Test methods for agglomerated stone—Part 6：Determination of impact resistance 合成石材试验方法 第6部分：耐冲击性的测定 |
China National Standards si |
English PDF |
| GB/T 20936.1-2017 |
Gas detectors for explosive atmospheres—Part 1: Performance requirements of detectors for flammable gases 爆炸性环境用气体探测器 第1部分：可燃气体探测器性能要求 |
China National Standards si |
English PDF |
| GB/T 34965-2017 |
Grade of chilling injury to capsicum 辣椒寒害等级 |
China National Standards si |
English PDF |
| GB/T 35302-2017 |
Guidelines for the use of Russian in public service areas 公共服务领域俄文译写规范 |
China National Standards si |
English PDF |
| GB/T 35465.1-2017 |
Test method for fatigue properties of polymer matrix composite materials—Part 1：General principle 聚合物基复合材料疲劳性能测试方法 第1部分：通则 |
China National Standards si |
English PDF |
| GB/T 35466-2017 |
Determination of the emission of volatile organic compounds form wood-plastic composite for construction 建筑用木塑复合材料挥发性有机化合物（VOC）测定 |
China National Standards si |
English PDF |
| GB/T 35721-2017 |
Distributed fault diagnosis system of transmission lines 输电线路分布式故障诊断系统 |
China National Standards si |
English PDF |
| GB/T 35509-2017 |
Application and evaluation of corrosion inhibitors in oil and gas fields 油气田缓蚀剂的应用和评价 |
China National Standards si |
English PDF |
| GB/T 34916-2017 |
Nanotechnologies—Multi-walled carbon nanotubes—Determination of amorphous carbon content by thermogravimetric analysis 纳米技术 多壁碳纳米管 热重分析法测试无定形碳含量 |
China National Standards si |
English PDF |
| GB/T 14732-2017 |
Wood adhesives: urea-formaldehyde, phenol-formaldehyde and melamine-formaldehyde resins 木材工业胶粘剂用脲醛、酚醛、三聚氰胺甲醛树脂 |
China National Standards si |
English PDF |
| GB/T 14074-2017 |
Testing methods for wood adhesives and resins 木材工业用胶粘剂及其树脂检验方法 |
China National Standards si |
English PDF |
| GB/T 35486-2017 |
Specification of spiral-conveyer for logistics warehousing distribution center 物流仓储配送中心螺旋箱式输送机技术规范 |
China National Standards si |
English PDF |
| GB/T 35208-2017 |
Self-closing valves for LPG cylinders 自闭式液化石油气瓶阀 |
China National Standards si |
English PDF |
| GB/T 18039.3-2017 |
Electromagnetic compatibility—Environment—Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems 电磁兼容 环境 公用低压供电系统低频传导骚扰及信号传输的兼容水平 |
China National Standards si |
English PDF |
| GB/T 35477-2017 |
Superabrasive—Synthetic diamond micropowders 超硬磨料 人造金刚石微粉 |
China National Standards si |
English PDF |
| GB/T 34661-2017 |
Explosion protected technique requirements for vapour recovery system 油气回收系统防爆技术要求 |
China National Standards si |
English PDF |
| GB/T 35472.3-2017 |
Test method for friction element of wet automatic transmission—Part 3: Low-speed stepped power test method 湿式自动变速箱摩擦元件试验方法 第3部分：低速功率递增试验方法 |
China National Standards si |
English PDF |
| GB/T 35731-2017 |
Code of practice for maintenance and test of distributed control system in fossil fuel power plant 火力发电厂分散控制系统运行维护与试验技术规程 |
China National Standards si |
English PDF |
| GB/T 35169-2017 |
Test method of weatherability for external thermal insulation composite systems of building 建筑外墙外保温系统耐候性试验方法 |
China National Standards si |
English PDF |
| GB/T 35516-2017 |
Light diffusion polycarbonate for LED luminaire LED灯罩用光扩散聚碳酸酯 |
China National Standards si |
English PDF |
| GB/T 35495-2017 |
Determination of changes in cohesion for elastic sealants after dynamic artificial weathering 弹性密封胶暴露于动态人工气候老化后内聚形态变化的试验方法 |
China National Standards si |
English PDF |
| GB/T 26398-2017 |
Evaluation guide of detergence,water costing and saving for laundry detergents—simulated household washing test method 衣料用洗涤剂去污性能、耗水量与节水性能评估指南 模拟家庭洗涤试验法 |
China National Standards si |
English PDF |
| GB/T 35659-2017 |
Classification and rating rules for trade exhibitions 经济贸易展览会分级与评定准则 |
China National Standards si |
English PDF |
| GB/T 35415-2017 |
Classification and codes for technical attribute keywords in product standard 产品标准技术指标索引分类与代码 |
China National Standards si |
English PDF |
| GB/T 35484.2-2017 |
Earth-moving machinery and mobile road construction machinery—Worksite data exchange—Part 2: Data dictionary 土方机械和移动式道路施工机械 工地数据交换 第2部分：数据字典 |
China National Standards si |
English PDF |
| GB/T 35648-2017 |
Classification and coding of geographic information points of interest 地理信息兴趣点分类与编码 |
China National Standards si |
English PDF |
| GB/T 35381.2-2017 |
Tractors and machinery for agriculture and forestry—Serial control and communications data network—Part 2: Physical layer 农林拖拉机和机械 串行控制和通信数据网络 第2部分：物理层 |
China National Standards si |
English PDF |
| GB/T 19882.222-2017 |
Automatic meter reading system—Part 222: Physical layer(PHY) specifications—Wireless communication meter reading system 自动抄表系统 第222部分：无线通信抄表系统 物理层规范 |
China National Standards si |
English PDF |
| GB/Z 35474-2017 |
Natural gas—Technical explanation for calculation of physical properties from composition 天然气 通过组成计算物性参数的技术说明 |
China National Standards si |
English PDF |
| GB/T 35484.1-2017 |
Earth-moving machinery and mobile road construction machinery－Worksite data exchange－Part 1: System architecture 土方机械和移动式道路施工机械 工地数据交换 第1部分：系统体系 |
China National Standards si |
English PDF |
| GB/T 35171-2017 |
Methods for sampling and sample preparation of CMSW for coprocessing in cement kiln 水泥窑协同处置的生活垃圾预处理可燃物取样和样品制备方法 |
China National Standards si |
English PDF |
| GB/T 34835-2017 |
Electrical safety—Classification of interfaces for equipment to be connected to information and communications technology networks 电气安全 与信息技术和通信技术网络连接设备的接口分类 |
China National Standards si |
English PDF |
| GB/T 35223-2017 |
Specifications for surface meteorological observation—Meteorological visibility 地面气象观测规范 气象能见度 |
China National Standards si |
English PDF |
| GB/T 35499-2017 |
Code for quality and technology of anticorrosive construction with furan resin 呋喃树脂耐蚀作业质量技术规范 |
China National Standards si |
English PDF |
| GB/T 31990.5-2017 |
Technical specification for eletric power information transmission system on plastic optical fiber—Part 5:Generic cabling 塑料光纤电力信息传输系统技术规范 第5部分：综合布线 |
China National Standards si |
English PDF |
| GB/T 6414-2017 |
Castings—Dimensional tolerances and geometrical tolerances and machining allowances 铸件 尺寸公差、几何公差与机械加工余量 |
China National Standards si |
English PDF |
| GB/T 13026-2017 |
Types and dimensions of a.c.capacitance graded bushings 交流电容式套管型式与尺寸 |
China National Standards si |
English PDF |
| GB/T 35387.1-2017 |
Marine fluorescence signs—Part 1: Life-saving signs 船用荧光标志物 第1部分：安全救生标志物 |
China National Standards si |
English PDF |
| GB/T 12476.3-2017 |
Electrical apparatus for use in the presence of combustible dust—Part 3: Classification of areas where combustible dusts are or may be present 可燃性粉尘环境用电气设备 第3部分：存在或可能存在可燃性粉尘的场所分类 |
China National Standards si |
English PDF |
| GB/T 4796.1-2017 |
Classification of environmental conditions—Part 1: Environmental parameters and their severities 环境条件分类 第1部分：环境参数及其严酷程度 |
China National Standards si |
English PDF |
| GB/T 35175-2017 |
High speed on-off solenoid valve for automotive automatic transmission 汽车自动变速器用高速开关电磁阀 |
China National Standards si |
English PDF |
| GB/T 35756-2017 |
Fireworks—Specification and designation 烟花爆竹 规格与命名 |
China National Standards si |
English PDF |
| GB/T 35361-2017 |
Ultrasonic testing technique and quality classification for titanium butt weld joints on submersible 潜水器钛合金对接焊缝超声波检测及质量分级 |
China National Standards si |
English PDF |
| GB/T 35367-2017 |
X-ray radiography technique and quality classification for titanium butt weld joints on submersible 潜水器钛合金对接焊缝X射线检测及质量分级 |
China National Standards si |
English PDF |
| GB/T 35364-2017 |
TA31 titanium alloy forgings for submersible 潜水器用TA31合金锻件 |
China National Standards si |
English PDF |
| GB/T 35368-2017 |
Ti75 titanium alloy bars for submersible 潜水器用Ti75合金棒材 |
China National Standards si |
English PDF |
| GB/T 35416-2017 |
Classification and codes for intangible assets 无形资产分类与代码 |
China National Standards si |
English PDF |
| GB/T 35644-2017 |
Specification for data acquisition of underground pipeline 地下管线数据获取规程 |
China National Standards si |
English PDF |
| GB/T 4797.2-2017 |
Classification of environmental conditions—Environmental conditions appearing in nature—Air pressure 环境条件分类 自然环境条件 气压 |
China National Standards si |
English PDF |
| GB/T 22587-2017 |
Matrix to superconductor volume ratio measurement—Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires 基体与超导体体积比测量 铜-铌鈦（Cu Nb-Ti）复合超导线铜-超[体积]比的测量 |
China National Standards si |
English PDF |
| GB/T 20936.2-2017 |
Gas detectors for explosive atmospheres—Part 2：Selection，installation，use and maintenance of detectors for flammable gases and oxygen 爆炸性环境用气体探测器 第2部分：可燃气体和氧气探测器的选型、安装、使用和维护 |
China National Standards si |
English PDF |
| GB/T 20936.3-2017 |
Gas detectors for explosive atmospheres—Part 3: Guidance on functional safety of fixed gas detection systems 爆炸性环境用气体探测器 第3部分：固定式气体探测系统功能安全指南 |
China National Standards si |
English PDF |
| GB/T 35629-2017 |
Indoor and outdoor multi-mode cooperative positioning service interface 室内外多模式协同定位服务接口 |
China National Standards si |
English PDF |
| GB/T 34663-2017 |
General technical requirements for electric resistance heaters used in explosive gas atmospheres 爆炸性气体环境用电阻加热器通用技术要求 |
China National Standards si |
English PDF |
| GB/T 35212.2-2017 |
Analysis and evaluation methods of gas and solution and desulfurization decarbonization and sulfur recovery for natural gas treating plant—Part 2: Analysis of alkanolamine desulfurization decarbonization solvent 天然气处理厂气体及溶液分析与脱硫、脱碳及硫磺回收分析评价方法 第2部分：脱硫、脱碳溶剂分析 |
China National Standards si |
English PDF |
| GB/T 14806-2017 |
A.C.electric ventilating fans andregulators for household and similar purposes 家用和类似用途的交流换气扇及其调速器 |
China National Standards si |
English PDF |
| GB/T 20936.4-2017 |
Gas detectors for explosive atmospheres—Part 4：Performance requirements of open path detectors for flammable gases 爆炸性环境用气体探测器 第4部分：开放路径可燃气体探测器性能要求 |
China National Standards si |
English PDF |
| GB/T 35160.3-2017 |
Test methods for agglomerated stone—Part 3：Determination of compressive strength 合成石材试验方法 第3部分：压缩强度的测定 |
China National Standards si |
English PDF |
| GB/T 35730-2017 |
General design requirements of pressurized water reactor nuclear power plants with passive safety systems 非能动安全系统压水堆核电厂总设计要求 |
China National Standards si |
English PDF |
| GB/T 35776-2017 |
Spatiotemporal infrastructure for smart city－Basic specifications 智慧城市时空基础设施 基本规定 |
China National Standards si |
English PDF |
| GB/T 4127.17-2017 |
Bonded abrasive products—Dimensions—Part 17: Spindle mounted wheels 固结磨具 尺寸 第17部分：带柄磨头 |
China National Standards si |
English PDF |
| GB/T 2495-2017 |
Bonded abrasive products—Packing 固结磨具 包装 |
China National Standards si |
English PDF |
| GB/T 19249-2017 |
Reverse osmosis water treatment equipment 反渗透水处理设备 |
China National Standards si |
English PDF |
| GB/T 35646-2017 |
Basic requirement of incremental updating of navigable electronic maps 导航电子地图增量更新基本要求 |
China National Standards si |
English PDF |
| GB/T 35479-2017 |
Superabrasive products—Grinding tools with diamond or cubic boron nitride—General survey and designation 超硬磨料制品 金刚石或立方氮化硼磨具 形状总览和标记 |
China National Standards si |
English PDF |
| GB/T 35752-2017 |
Warp-knitted composite geotextiles 经编复合土工织物 |
China National Standards si |
English PDF |
| GB/T 35513.1-2017 |
Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 1: Designation system and basis for specifications 塑料 聚碳酸酯(PC)模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards si |
English PDF |
| GB/T 35780.2-2017 |
Customer contact service—Part 2: Requirements for clients using the services of customer contact centres 顾客联络服务 第2部分：使用顾客联络中心服务的委托方要求 |
China National Standards si |
English PDF |
| GB/T 35684-2017 |
Technique requirements for explosion suppression material in fuel tank explosive atmospheres 燃油容器爆炸性环境阻隔抑爆材料技术要求 |
China National Standards si |
English PDF |
| GB/T 35133-2017 |
Reference model for business group operations management 集团企业经营管理参考模型 |
China National Standards si |
English PDF |
| GB/T 35285-2017 |
Information security technology—Public key infrastructure—Technical requirements for digital certificate based reliable electronic signature creation and verification 信息安全技术 公钥基础设施 基于数字证书的可靠电子签名生成及验证技术要求 |
China National Standards si |
English PDF |
| GB/T 35791-2017 |
Specification for single-phase-to-ground fault feeder selection device based on traveling waves for neutral non-effectively grounded system 中性点非有效接地系统单相接地故障行波选线装置技术要求 |
China National Standards si |
English PDF |
| GB/T 35346-2017 |
Technical requirement of closing condition for ship 船舶封船状态技术要求 |
China National Standards si |
English PDF |
| GB/T 35403.1-2017 |
National articles numbering and basic information specification—Part 1: Framework and basic rules 国家物品编码与基础信息通用规范 第1部分：总体框架 |
China National Standards si |
English PDF |
| GB/T 35429-2017 |
Classification and codes for quality technology services 质量技术服务分类与代码 |
China National Standards si |
English PDF |
| GB/T 35435-2017 |
General design specification of science experiment rack in space station 空间站科学实验柜通用设计规范 |
China National Standards si |
English PDF |
| GB/T 35287-2017 |
Information security technology—Guidelines of trusted identity technology for website 信息安全技术 网站可信标识技术指南 |
China National Standards si |
English PDF |
| GB/T 35693-2017 |
Technical specification for valvehall fittings of ±800kV ultra high voltage direct current（UHVDC） transmission project ±800kV特高压直流输电工程阀厅金具技术规范 |
China National Standards si |
English PDF |
| GB/T 35711-2017 |
Analysis, restrain and measurement of harmonics of DC side of high voltage direct current (HVDC) transimission system 高压直流输电系统直流侧谐波分析、抑制与测量导则 |
China National Standards si |
English PDF |
| GB/T 35692-2017 |
Guideline for system planning of high voltage direct current（HVDC） power transmission project 高压直流输电工程系统规划导则 |
China National Standards si |
English PDF |
| GB/T 35414-2017 |
Requirements of oxygen conditioning for indoor oxygen diffusion in plateau area 高原地区室内空间弥散供氧（氧调）要求 |
China National Standards si |
English PDF |
| GB/Z 30556.1-2017 |
Electromagnetic compatibility—Installation and mitigation guidelines—General considerations 电磁兼容 安装和减缓导则 一般要求 |
China National Standards si |
English PDF |
| GB/T 18972-2017 |
Classification,investigation and evaluation of tourism resources 旅游资源分类、调查与评价 |
China National Standards si |
English PDF |
| GB/T 35633-2017 |
General requirements of geographical names expressing in public maps 公开版地图地名表示通用要求 |
China National Standards si |
English PDF |
| GB/T 35552.1-2017 |
Technical requirements for Class B shipborne equipment of the automatic identification system(AIS)—Part 1: Carrier-sense time division multiple access(CSTDMA) techniques 船舶自动识别系统(AIS)B类设备技术要求 第1部分：载波侦听时分多址（CSTDMA） |
China National Standards si |
English PDF |
| GB/T 23439-2017 |
Expansive agents for concrete 混凝土膨胀剂 |
China National Standards si |
English PDF |
| GB/T 17850.1-2017 |
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part1:General introduction and classification 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第1部分：导则和分类 |
China National Standards si |
English PDF |
| GB/T 18838.2-2017 |
Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 2: Chilled-iron grit 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第2部分：冷硬铸铁砂 |
China National Standards si |
English PDF |
| GB/T 17850.5-2017 |
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 5:Nickel refinery slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第5部分：镍精炼渣 |
China National Standards si |
English PDF |
| GB/T 17850.7-2017 |
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 7: Fused aluminium oxide 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第7部分：熔融氧化铝 |
China National Standards si |
English PDF |
| GB/T 35555-2017 |
Basic Specification for hot spring service 温泉服务基本规范 |
China National Standards si |
English PDF |
| GB/T 24131.2-2017 |
Rubber,raw—Determination of volatile-matter content—Part 2:Thermogravimetric methods using an automatic analyser with an infrared drying unit 生橡胶 挥发分含量的测定 第2部分：带红外线干燥单元的自动分析仪加热失重法 |
China National Standards si |
English PDF |
| GB/T 34919-2017 |
Code of practice for examination of printed documents in forensics 法庭科学打印文件检验技术规程 |
China National Standards si |
English PDF |
| GB/T 35686-2017 |
Electrical apparatus and installation in areas endangered by explosives 火炸药危险环境用电气设备及安装 |
China National Standards si |
English PDF |
| GB/T 35251-2017 |
Waste pyrolysis and incineration treatment device 垃圾裂化焚烧装置 |
China National Standards si |
English PDF |
| GB/T 25843-2017 |
Technical requirments of control and protection equipment of ±800 kV ultra high voltage direct current transmission ±800 kV 特高压直流输电控制与保护设备技术要求 |
China National Standards si |
English PDF |
| GB/T 35160.1-2017 |
Test methods for agglomerated stone—Part 1：Determination of apparent density and water absorption 合成石材试验方法 第1部分：密度和吸水率的测定 |
China National Standards si |
English PDF |
| GB/T 35513.2-2017 |
Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 聚碳酸酯(PC)模塑和挤出材料 第2部分：试样制备和性能测试 |
China National Standards si |
English PDF |
| Find out:17019Items | To Page of: First -Previous-Next -Last | [52] [53] [54] [55] [56] [57] [58] |
+86-755-25831330
