Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 2376-2013 |
Sulphur dyes - Determination of dyeing shade and relative strength 硫化染料 染色色光和强度的测定 |
China National Standards |
 English PDF |
| GB/T 20020-2013 |
Fumed silica 气相二氧化硅 |
China National Standards |
English PDF |
| GB/T 17519-2013 |
Guidance on the compilation of safety data sheet for chemical products 化学品安全技术说明书编写指南 |
China National Standards |
English PDF |
| GB/T 16580-2013 |
D201 macroporous strongly basic styrene type anion exchange resins D201大孔强碱性苯乙烯系阴离子交换树脂 |
China National Standards |
English PDF |
| GB/T 16579-2013 |
D001 macroporous strongly acidic styrene type cation exchange resins D001大孔强酸性苯乙烯系阳离子交换树脂 |
China National Standards |
English PDF |
| GB/T 11212-2013 |
Sodium hydroxide for chemical fiber use 化纤用氢氧化钠 |
China National Standards |
English PDF |
| GB/T 27415-2013 |
Estimate of detection and quantitation limit for analytical method 分析方法检出限和定量限的评估 |
China National Standards |
English PDF |
| GB/T 27201-2013 |
Credit evaluation criteria for certification bodies 认证机构信用评价准则 |
China National Standards |
English PDF |
| GB/T 50888-2013 |
Code for energy efficiency design of wood based panel engineering 人造板工程节能设计规范 |
China National Standards |
English PDF |
| GB 50910-2013 |
Code for design of energy conservation of mechanical industrial engineering 机械工业工程节能设计规范 |
China National Standards |
English PDF |
| GB 50907-2013 |
Code for design of blast resistant chamber structures 抗爆间室结构设计规范 |
China National Standards |
English PDF |
| GB 50906-2013 |
Code for design of machinery industry workshop structures 机械工业厂房结构设计规范 |
China National Standards |
English PDF |
| GB/T 50904-2013 |
Code for installation and quality acceptance of nonwoven equipments engineering 非织造布设备工程安装与质量验收规范 |
China National Standards |
English PDF |
| GB/T 50893-2013 |
Technical code for retrofitting of heating system on energy efficiency 供热系统节能改造技术规范 |
China National Standards |
English PDF |
| GB 50890-2013 |
Code for design of wood-based panel finishing engineering 饰面人造板工程设计规范 |
China National Standards |
English PDF |
| GB 50889-2013 |
Code for design of occupational safety and health in wood based panel engineering 人造板工程职业安全卫生设计规范 |
China National Standards |
English PDF |
| GB/T 50887-2013 |
Code for environmental protection design of wood based panel engineering 人造板工程环境保护设计规范 |
China National Standards |
English PDF |
| GB/T 50885-2013 |
Code for design of water resources protection forest engineering 水源涵养林工程设计规范 |
China National Standards |
English PDF |
| GB/T 50878-2013 |
Evaluation standard for green industrial building 绿色工业建筑评价标准 |
China National Standards |
English PDF |
| GB/T 50876-2013 |
Code for safety detecting and evaluation of small hydropower station 小型水电站安全检测与评价规范 |
China National Standards |
English PDF |
| GB 50874-2013 |
Code for structure design on semi-underground storage bin in coal industry 煤炭工业半地下储仓建筑结构设计规范 |
China National Standards |
English PDF |
| GB 50869-2013 |
Technical code for municipal solid waste sanitary landfill 生活垃圾卫生填埋处理技术规范 |
China National Standards |
English PDF |
| GB/T 50845-2013 |
Technical code for energy-saving refurbishment for small hydropower grids engineering 小水电电网节能改造工程技术规范 |
China National Standards |
English PDF |
| GB/T 50837-2013 |
Standard for non-ferrous metal refinery drawings 有色金属冶炼工程制图标准 |
China National Standards |
English PDF |
| GB 50767-2013 |
Standard for design of energy consumption index in propellant and explosive engineering 火炸药工程设计能耗指标标准 |
China National Standards |
English PDF |
| GB/T 50674-2013 |
Code of meteorology for nuclear power plant 核电厂工程气象技术规范 |
China National Standards |
English PDF |
| GB/T 50214-2013 |
Technical code for composite steel-form 组合钢模板技术规范 |
China National Standards |
English PDF |
| GB 50157-2013 |
Code for design of metro 地铁设计规范 |
China National Standards |
English PDF |
| GB 50119-2013 |
Code for concrete admixture application 混凝土外加剂应用技术规范 |
China National Standards |
English PDF |
| GB/T 50076-2013 |
Code for measurement of the reverberation time in rooms 室内混响时间测量规范 |
China National Standards |
English PDF |
| GB/T 50002-2013 |
Standard for modular coordination of building 建筑模数协调标准 |
China National Standards |
English PDF |
| GB 18267-2013 |
Cashmere 山羊绒 |
China National Standards |
English PDF |
| GB 1523-2013 |
Sheep wool 绵羊毛 |
China National Standards |
English PDF |
| GB 29551-2013 |
Laminated solar PV glazing materials in building 建筑用太阳能光伏夹层玻璃 |
China National Standards |
English PDF |
| GB 29550-2013 |
General safety technique conditions for gas in civil building 民用建筑燃气安全技术条件 |
China National Standards |
English PDF |
| GB 11946-2013 |
Thermally toughened safety glass for ships 船用钢化安全玻璃 |
China National Standards |
English PDF |
| GB/T 9746-2013 |
Series of aircraft tyres 航空轮胎系列 |
China National Standards |
English PDF |
| GB/T 29580-2013 |
Time-based cost-allocation device for central air-conditioning 时间法集中空调分户计量装置 |
China National Standards |
English PDF |
| GB/T 29559-2013 |
Surface chemical analysis - Analysis of zinc and/or aluminium based metallic coatings by glow discharge optical emission spectrometry 表面化学分析 辉光放电原子发射光谱 锌和/或铝基合金镀层的分析 |
China National Standards |
English PDF |
| GB/T 29558-2013 |
Surface chemical analysis - Auger electron spectroscopy - Repeatability and constancy of intensity scale 表面化学分析 俄歇电子能谱 强度标的重复性和一致性 |
China National Standards |
English PDF |
| GB/T 29557-2013 |
Surface chemical analysis - Depth profiling - Measurment of sputtered depth 表面化学分析 深度剖析 溅射深度测量 |
China National Standards |
English PDF |
| GB/T 29556-2013 |
Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - determination of lateral resolution, analysis area, and sample area viewed by the analyser 表面化学分析 俄歇电子能谱和X射线光电子能谱 横向分辨率、分析面积和分析器所能检测到的样品面积的测定 |
China National Standards |
English PDF |
| GB/T 29555-2013 |
Test method of operating forces for doors 门的启闭力试验方法 |
China National Standards |
English PDF |
| GB/T 29554-2013 |
Ultra high molecular weight polyethylene fibre 超高分子量聚乙烯纤维 |
China National Standards |
English PDF |
| GB/T 29553-2013 |
Spinner cover of composites for wind power 风力发电复合材料整流罩 |
China National Standards |
English PDF |
| GB/T 29552-2013 |
Fibre reinforced plastics composites bridge decks 纤维增强复合材料桥板 |
China National Standards |
English PDF |
| GB/T 29530-2013 |
Hinged or pivoted doors - Determination of the resistance to static torsion 平开门和旋转门 抗静扭曲性能的测定 |
China National Standards |
English PDF |
| GB/T 19501-2013 |
Microbeam analysis - General guide for electron backscatter diffraction analysis 微束分析 电子背散射衍射分析方法通则 |
China National Standards |
English PDF |
| GB/T 18907-2013 |
Microbeam analysis - Analytical electron microscopy - Selected-area electron diffraction analysis using a transmission electron microscope 微束分析 分析电子显微术 透射电镜选区电子衍射分析方法 |
China National Standards |
English PDF |
| GB/T 17361-2013 |
Microbeam analysis - Identification of authigenic clay mineral in sedimentary rock menthod by scanning electron microscope and energy dispersive spectrometer 微束分析 沉积岩中自生粘土矿物鉴定 扫描电子显微镜及能谱仪方法 |
China National Standards |
English PDF |
| GB/T 15244-2013 |
Microbeam analysis - Quantitative analysis of silicate glass by wavelength dispersive x-ray spectrometry and energy dispersive x-ray spectrometry 微束分析 硅酸盐玻璃的定量分析 波谱法及能谱法 |
China National Standards |
English PDF |
| GB/T 29606-2013 |
Stainless steel vacuum flask 不锈钢真空杯 |
China National Standards |
English PDF |
| GB/T 29603-2013 |
Full aperture easy open end made of tinplate or ECCS 镀锡或镀铬薄钢板全开式易开盖 |
China National Standards |
English PDF |
| GB/T 29602-2013 |
Solid beverages 固体饮料 |
China National Standards |
English PDF |
| GB/T 29601-2013 |
Stainless steel ware 不锈钢器皿 |
China National Standards |
English PDF |
| GB/T 29562.3-2013 |
Energy efficiency test procedures of motors for crane - Part 3: Conical rotor 3-phase asynchronous motors 起重机械用电动机能效测试方法 第3部分：锥形转子三相异步电动机 |
China National Standards |
English PDF |
| GB/T 29562.2-2013 |
Energy efficiency test procedures of motors for crane - Part 2: YZR/YZ series 3-phase asynchronous motors 起重机械用电动机能效测试方法 第2部分：YZR/YZ系列三相异步电动机 |
China National Standards |
English PDF |
| GB/T 29562.1-2013 |
Energy efficiency test procedures of motors for crane - Part 1: YZP series of variable-frequency adjustable-speed 3-phase asynchronous motors 起重机械用电动机能效测试方法 第1部分：YZP系列变频调速三相异步电动机 |
China National Standards |
English PDF |
| GB/T 29561-2013 |
Fixed-base crane for harbor 港口固定式起重机 |
China National Standards |
English PDF |
| GB/T 29560-2013 |
Portal slewing crane 门座起重机 |
China National Standards |
English PDF |
| GB/T 29604-2013 |
Sensory analysis - General guidance for establishing references for sensory attributes 感官分析 建立感官特性参比样的一般导则 |
China National Standards |
English PDF |
| GB/Z 29638-2013 |
Functional safety of electrical/electronic/programmable electronic safety-related systems - Functional safety and GB/T 20438 电气/电子/可编程电子安全相关系统的功能安全 功能安全概念及GB/T 20438系列概况 |
China National Standards |
English PDF |
| GB/Z 29619.6-2013 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 8: INTERBUS specification - Part 6: Application Layer Protocol specification 测量和控制数字数据通信 工业控制系统用现场总线 类型8：INTERBUS规范 第6部分：应用层协议规范 |
China National Standards |
English PDF |
| GB/Z 29619.5-2013 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 8: INTERBUS specification -Part 5: Application Layer service definition 测量和控制数字数据通信 工业控制系统用现场总线 类型8：INTERBUS规范 第5部分：应用层服务的定义 |
China National Standards |
English PDF |
| GB/Z 29619.4-2013 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 8: INTERBUS specification -Part 4: Data Link protocol specification 测量和控制数字数据通信 工业控制系统用现场总线 类型8：INTERBUS规范 第4部分：数据链路协议规范 |
China National Standards |
English PDF |
| GB/Z 29619.3-2013 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 8: INTERBUS specification -Part 3: Data Link service definition 测量和控制数字数据通信 工业控制系统用现场总线 类型8：INTERBUS规范 第3部分：数据链路服务定义 |
China National Standards |
English PDF |
| GB/Z 29619.2-2013 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 8: INTERBUS Specification - Part 2: Physical Layer specification and service definition 测量和控制数字数据通信 工业控制系统用现场总线 类型8: INTERBUS规范 第2部分：物理层规范和服务定义 |
China National Standards |
English PDF |
| GB/Z 29619.1-2013 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 8: INTERBUS specification - Part 1: Overview 测量和控制数字数据通信 工业控制系统用现场总线 类型8：INTERBUS规范 第1部分：概述 |
China National Standards |
English PDF |
| GB/Z 29496.3-2013 |
Control & communication network CC-Link Safety Specification - Part 3: Implementation 控制与通信网络CC-Link Safety 规范 第3部分：实现 |
China National Standards |
English PDF |
| GB/Z 29496.2-2013 |
Control & communication network CC-Link Safety Specification - Part 2: Profiles 控制与通信网络CC-Link Safety 规范 第2部分：行规 |
China National Standards |
English PDF |
| GB/Z 29496.1-2013 |
Control & communication network CC-Link Safety Specification - Part 1: Overview / Protocol 控制与通信网络CC-Link Safety 规范 第1部分:概述/协议 |
China National Standards |
English PDF |
| GB/T 29618.41-2013 |
Field device tool（FDT） interface specification - Part 41: Object model integration profile-Common object model 现场设备工具(FDT)接口规范 第41部分：对象模型行规集成-通用对象模型 |
China National Standards |
English PDF |
| GB/T 29618.315-2013 |
Field device tool (FDT) interface specification - Part 315: Communication profile integration - MODBUS 现场设备工具(FDT)接口规范 第315部分：通信行规集成 MODBUS现场总线规范 |
China National Standards |
English PDF |
| GB/T 29618.2-2013 |
Field device tool（FDT）interface specification - Part 2: Concepts and detailed description 现场设备工具(FDT)接口规范 第2部分：概念和详细描述 |
China National Standards |
English PDF |
| GB/T 29618.1-2013 |
Field device tool(FDT) interface specification - Part 1: Overview and guidance 现场设备工具(FDT)接口规范 第1部分：概述和导则 |
China National Standards |
English PDF |
| GB/T 29617-2013 |
Determination of density, relative density,and API gravity of liquids by digital density meter 数字密度计测定液体密度、相对密度和API比重的试验方法 |
China National Standards |
English PDF |
| GB/T 20965-2013 |
Control network HBES technical specification - Home and building control system 控制网络HBES技术规范 住宅和楼宇控制系统 |
China National Standards |
English PDF |
| GB/T 20245.5-2013 |
Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential 电化学分析器性能表示 第5部分：氧化还原电位 |
China National Standards |
English PDF |
| GB/T 20245.4-2013 |
Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors 电化学分析器性能表示 第4部分：采用覆膜电流式传感器测量水中溶解氧 |
China National Standards |
English PDF |
| GB/T 20245.3-2013 |
Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity 电化学分析器性能表示 第3部分：电解质电导率 |
China National Standards |
English PDF |
| GB/T 20245.2-2013 |
Expression of performance of electrochemical analyzers - Part 2: pH value 电化学分析器性能表示 第2部分：pH值 |
China National Standards |
English PDF |
| GB/T 18403.6-2013 |
Expression of performance of gas analyzers - Part 6: Photometric analyzers 气体分析器性能表示 第6部分：光度分析器 |
China National Standards |
English PDF |
| GB/T 18403.2-2013 |
Expression of performance of gas analyzers - Part 2: Oxygen in gas (Utilizing high temperature electrochemical sensors) 气体分析器性能表示 第2部分：气体中氧（采用高温电化学传感器） |
China National Standards |
English PDF |
| GB/T 29591-2013 |
Gum rosin from Pinus.elliottii Engelm 湿地松松香 |
China National Standards |
English PDF |
| GB/T 9833.9-2013 |
Compressed tea - Part 9: Qing zhuan tea 紧压茶 第9部分：青砖茶 |
China National Standards |
English PDF |
| GB/T 9833.8-2013 |
Compressed tea - Part 8: Mi zhuan tea 紧压茶 第8部分：米砖茶 |
China National Standards |
English PDF |
| GB/T 9833.7-2013 |
Compressed tea - Part 7: Jin jian tea 紧压茶 第7部分：金尖茶 |
China National Standards |
English PDF |
| GB/T 9833.6-2013 |
Compressed tea - Part 6: Jin tea 紧压茶 第6部分：紧茶 |
China National Standards |
English PDF |
| GB/T 9833.5-2013 |
Compressed tea - Part 5: Tuo tea 紧压茶 第5部分：沱茶 |
China National Standards |
English PDF |
| GB/T 9833.4-2013 |
Compressed tea - Part 4: Kang zhuan tea 紧压茶 第4部分：康砖茶 |
China National Standards |
English PDF |
| GB/T 9833.3-2013 |
Compressed tea - Part 3: Fu zhuan tea 紧压茶 第3部分：茯砖茶 |
China National Standards |
English PDF |
| GB/T 9833.2-2013 |
Compressed tea - Part 2: Hei zhuan tea 紧压茶 第2部分：黑砖茶 |
China National Standards |
English PDF |
| GB/T 9833.1-2013 |
Compressed tea - Part 1: Hua zhuan tea 紧压茶 第1部分：花砖茶 |
China National Standards |
English PDF |
| GB/T 29589-2013 |
Detection and identification of Mycocentrospora acerina (Hartig) Deighton 香菜腐烂病菌检疫鉴定方法 |
China National Standards |
English PDF |
| GB/T 29588-2013 |
Detection and identification of Mycosphaerella dearnessii Barr. 松针褐斑病菌检疫鉴定方法 |
China National Standards |
English PDF |
| GB/T 29587-2013 |
Detection and identification of Cronartium ribicola J. C. Fisch. 松疱锈病菌检疫鉴定方法 |
China National Standards |
English PDF |
| GB/T 29586-2013 |
Detection and identification of Eriosoma lanigerum (Hausmann) 苹果绵蚜检疫鉴定方法 |
China National Standards |
English PDF |
| GB/T 29585-2013 |
Detection and identification of Anguina agrostis (Steinbuch) Filipjev 剪股颖粒线虫检疫鉴定方法 |
China National Standards |
English PDF |
| GB/T 29584-2013 |
Detection and identification of Cladosporium cucumerinum Ell. et Arthur 黄瓜黑星病菌检疫鉴定方法 |
China National Standards |
English PDF |
| GB/T 29583-2013 |
Detection and identification of Flaveria bidentis (L.) Kuntze 黄顶菊检疫鉴定方法 |
China National Standards |
English PDF |
| Find out:56225Items | To Page of: First -Previous-Next -Last | [267] [268] [269] [270] [271] [272] [273] |
+86-755-25831330
