Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 6743-2008 |
Plastics(polyesteR resins) and paints and varnishes(binders) - Determination of partial acid value and total acid value 塑料用聚酯树脂、色漆和清漆用漆基 部分酸值和总酸值的测定 |
China National Standards R |
 English PDF |
| GB/T 6488-2008 |
Liquid chemicals - DeteRmination of refrative index at 20℃ 液体化工产品 折光率的测定(20℃) |
China National Standards R |
English PDF |
| GB/T 6324.5-2008 |
Test method of oRganic chemical products - Part 5: Determination of trace quantities of carbonyl compounds in organic chemicals 有机化工产品试验方法 第5部分：有机化工产品中羰基化合物含量的测定 |
China National Standards R |
English PDF |
| GB/T 5832.2-2008 |
DeteRmination of moisture in gases - Part 2:Dew point method 气体中微量水分的测定 第2部分：露点法 |
China National Standards R |
English PDF |
| GB/T 5720-2008 |
Test methods foR rubber O-rings O形橡胶密封圈试验方法 |
China National Standards R |
English PDF |
| GB/T 533-2008 |
Rubber,vulcanized or thermoplastic - Determination of density 硫化橡胶或热塑性橡胶 密度的测定 |
China National Standards R |
English PDF |
| GB/T 532-2008 |
Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabric 硫化橡胶或热塑性橡胶与织物粘合强度的测定 |
China National Standards R |
English PDF |
| GB/T 531.1-2008 |
Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1：Duromerer method （Shore hardness） 硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分：邵氏硬度计法（邵尔硬度） |
China National Standards R |
English PDF |
| GB/T 529-2008 |
Rubber,vulcanized or thermoplastic - Determination of tear strength（Trouser，angle and crescent test pieces） 硫化橡胶或热塑性橡胶撕裂强度的测定（裤形、直角形和新月形试样） |
China National Standards R |
English PDF |
| GB/T 5211.5-2008 |
Method foR the determination of resistance to materials of pigments 颜料耐性测定法 |
China National Standards R |
English PDF |
| GB/T 5211.11-2008 |
DeteRmination of water-soluble sulfates, chlorides and nitrates of pigments 颜料水溶硫酸盐、氯化物和硝酸盐的测定 |
China National Standards R |
English PDF |
| GB/T 5208-2008 |
DeteRmination of flash point - Rapid equilibrium closed cup method 闪点的测定 快速平衡闭杯法 |
China National Standards R |
English PDF |
| GB/T 4611-2008 |
DeteRmination method of "fish eyes"for polyvinyl chloride resins of general use 通用型聚氯乙烯树脂“鱼眼”的测定方法 |
China National Standards R |
English PDF |
| GB/T 3676-2008 |
Maleic anhydRide for industrial use 工业用顺丁烯二酸酐 |
China National Standards R |
English PDF |
| GB/T 6823-2008 |
Ballast tanks paint foR ship 船舶压载舱漆 |
China National Standards R |
English PDF |
| GB/T 3181-2008 |
ColouR standard for paint film 漆膜颜色标准 |
China National Standards R |
English PDF |
| GB/T 2977-2008 |
Size designation，dimensions，inflation pRessure and load capacity for truck tyres 载重汽车轮胎规格、尺寸、气压与负荷 |
China National Standards R |
English PDF |
| GB/T 21993-2008 |
Polyvinyl chloRide resins - Determination of the content of methanol or ethanol extract 聚氯乙烯树脂 甲醇或乙醇萃取物含量的测定 |
China National Standards R |
English PDF |
| GB/T 21992-2008 |
Polyvinyl chloRide resins for Paste - Determination of number of impurities particles and foreign particles 糊用聚氯乙烯树脂 杂质与外来粒子数的测定 |
China National Standards R |
English PDF |
| GB/T 21991-2008 |
Plastics - PReparation of PVC paste for test purpose - Planetary-mixer method 塑料 试验用聚氯乙烯（PVC）糊的制备 行星混合器法 |
China National Standards R |
English PDF |
| GB/T 21990-2008 |
Polyvinyl chloRide (PVC) pastes - Determination of fineness of grind 聚氯乙烯（PVC）糊 刮板细度的测定 |
China National Standards R |
English PDF |
| GB/T 21989-2008 |
Plastics - Poly(vinyl chloRide)pastes - Determination of apparent viscosity using the severs rheometer 塑料 聚氯乙烯糊 用Severs流变仪测定表观黏度 |
China National Standards R |
English PDF |
| GB/T 21988-2008 |
Plastics-Vinyl chloRide homopolymer and copolymer resins-Sieve analysis in water 塑料 氯乙烯均聚和共聚树脂 水中筛分析 |
China National Standards R |
English PDF |
| GB/T 21910-2008 |
Method foR measuring relative wet grip performance of passenger car tyres 轿车轮胎湿路面相对抓着性能试验方法 |
China National Standards R |
English PDF |
| GB/T 1863-2008 |
IRon oxide pigments 氧化铁颜料 |
China National Standards R |
English PDF |
| GB/T 1766-2008 |
Paints and vaRnishes - Rating schemes of degradation of coats 色漆和清漆 涂层老化的评级方法 |
China National Standards R |
English PDF |
| GB/T 17410-2008 |
ORganic heat transfer material heaters 有机热载体炉 |
China National Standards R |
English PDF |
| GB/T 1721-2008 |
DeteRmination of appearance and transparency of varnishes, boiled oils and thinners 清漆、清油及稀释剂外观和透明度测定法 |
China National Standards R |
English PDF |
| GB/T 1713-2008 |
DeteRmination of density of pigments - Pyknometer method 颜料密度的测定 比重瓶法 |
China National Standards R |
English PDF |
| GB/T 1668-2008 |
PlasticizeRs - Determination of acid value and acidity 增塑剂酸值及酸度的测定 |
China National Standards R |
English PDF |
| GB/T 16613-2008 |
Plastics - PReparation of PVC pastes for test purposes - Dissolver method 塑料 试验用聚氯乙烯（PVC）糊的制备 分散器法 |
China National Standards R |
English PDF |
| GB/T 1688-2008 |
Rubber,vulcanized - Determination of tension fatigue 硫化橡胶 伸张疲劳的测定 |
China National Standards R |
English PDF |
| GB/T 16881-2008 |
Coagulation-Deposition jaR test of water 水的混凝、沉淀试杯试验方法 |
China National Standards R |
English PDF |
| GB/T 1626-2008 |
Oxalic acid foR industrial use 工业用草酸 |
China National Standards R |
English PDF |
| GB/T 15337-2008 |
GeneRal rules for atomic absorption spectrometric analysis 原子吸收光谱分析法通则 |
China National Standards R |
English PDF |
| GB/T 14832-2008 |
Test methods foR compatibility between hydraulic fluids and standard elastomeric materials 标准弹性体材料与液压液体的相容性试验 |
China National Standards R |
English PDF |
| GB/T 13893-2008 |
Paints and vaRnishes - Determination of resistnace to humidity - Continuous condensation 色漆和清漆 耐湿性的测定 连续冷凝法 |
China National Standards R |
English PDF |
| GB/T 13549-2008 |
ChloRsulphonic acid for industrial use 工业氯磺酸 |
China National Standards R |
English PDF |
| GB/T 13258-2008 |
Technical phosphoRus pentasulfide 工业五硫化二磷 |
China National Standards R |
English PDF |
| GB/T 13254-2008 |
CapRolactam for industrial use 工业用己内酰胺 |
China National Standards R |
English PDF |
| GB/T 13248-2008 |
Rubber and rubber latices - Determination of manganese content - Sodium periodate photometric methodes 橡胶和胶乳 锰含量的测定 高碘酸钠光度法 |
China National Standards R |
English PDF |
| GB/T 12830-2008 |
Rubber，vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple shear methods 硫化橡胶或热塑性橡胶 与刚性板剪切模量和粘合强度的测定 四板剪切法 |
China National Standards R |
English PDF |
| GB/T 1192-2008 |
Techincal specification of agRicultural tyres 农业轮胎技术条件 |
China National Standards R |
English PDF |
| GB/T 11501-2008 |
PhotogRaphy - Density Measurement - Part 3：Spectral Conditions 摄影 密度测量 第3部分：光谱条件 |
China National Standards R |
English PDF |
| GB/T 10707-2008 |
Rubber - Determination of the burning 橡胶燃烧性能的测定 |
China National Standards R |
English PDF |
| GB/T 10666-2008 |
Calcium hypochloRite 次氯酸钙(漂粉精) |
China National Standards R |
English PDF |
| GB/T 972-2008 |
ThRead rolling flat dies 搓丝板 |
China National Standards R |
English PDF |
| GB/T 971-2008 |
thRead rolling cylindrical dies 滚丝轮 |
China National Standards R |
English PDF |
| GB/T 970.2-2008 |
CiRcular screwing dies - Part 2: Technical specifications 圆板牙 第2部分：技术条件 |
China National Standards R |
English PDF |
| GB/T 970.1-2008 |
CiRcular screwing dies - Part 1: The types and dimensions for circular screwing dies and die stocks 圆板牙 第1部分：圆板牙和圆板牙架的型式和尺寸 |
China National Standards R |
English PDF |
| GB/T 9487-2008 |
Diesel engines - Exhaust gas measuRement under free acceleration 柴油机自由加速排气烟度的测量方法 |
China National Standards R |
English PDF |
| GB/T 9258.2-2008 |
Coated abRasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P12 to P220 涂附磨具用磨料 粒度分析 第2部分：粗磨粒P12～P220粒度组成的测定 |
China National Standards R |
English PDF |
| GB/T 8498-2008 |
EaRth-moving machinery - Basic type - Identification and terms and definitions 土方机械 基本类型 识别、术语和定义 |
China National Standards R |
English PDF |
| GB/T 7682-2008 |
Milk sepaRator 牛奶分离机 |
China National Standards R |
English PDF |
| GB/T 725-2008 |
InteRnal combustion engines - Nomenclature and code of designations 内燃机产品名称和型号编制规则 |
China National Standards R |
English PDF |
| GB/T 7121.1-2008 |
The stRength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS 农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分：后置式静态试验方法 |
China National Standards R |
English PDF |
| GB/T 5862-2008 |
AgRicultural tractors and machinery - General purpose quick-action hydraulic couplers 农业拖拉机和机具 通用液压快换接头 |
China National Standards R |
English PDF |
| GB/T 5669-2008 |
Rotary tiller - Rotary blades and blade holders 旋耕机械 刀和刀座 |
China National Standards R |
English PDF |
| GB/T 5668-2008 |
Rotary tiller 旋耕机 |
China National Standards R |
English PDF |
| GB/T 5667-2008 |
PRoductive testing methods for agricultural machinery 农业机械 生产试验方法 |
China National Standards R |
English PDF |
| GB/T 5262-2008 |
AgRicultural machinery testing conditions-general rules for measuring methods 农业机械 试验条件测定方法的一般规定 |
China National Standards R |
English PDF |
| GB/T 4346-2008 |
Machine tools - Manually opeRated self-centring chucks 机床 手动自定心卡盘 |
China National Standards R |
English PDF |
| GB/T 4127.7-2008 |
Bonded abRasive products - Dimensions - Part 7: Grinding wheels for manually guided grinding 固结磨具 尺寸 第7部分：人工操纵磨削砂轮 |
China National Standards R |
English PDF |
| GB/T 4127.6-2008 |
Bonded abRasive products - Dimensions - Part 6: Grinding wheels for tool and tool room grinding 固结磨具 尺寸 第6部分：工具磨和工具室用砂轮 |
China National Standards R |
English PDF |
| GB/T 4127.5-2008 |
Bonded abRasive products - Dimensions - Part 5: Grinding wheels for surface grinding/face grinding 固结磨具 尺寸 第5部分：平面磨削用端面磨砂轮 |
China National Standards R |
English PDF |
| GB/T 4127.4-2008 |
Bonded abRasive products - Dimensions - Part 4: Grinding wheels for suface grinding/peripheral grinding 固结磨具 尺寸 第4部分：平面磨削用周边磨砂轮 |
China National Standards R |
English PDF |
| GB/T 4127.14-2008 |
Bonded abRasive products - Dimensions - Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder 固结磨具 尺寸 第14部分：角向砂轮机用去毛刺、荒磨和粗磨砂轮 |
China National Standards R |
English PDF |
| GB/T 4127.13-2008 |
Bonded abRasive products - Dimensions - Part 13: Grinding wheels for deburring and fettling on a vertical grinder 固结磨具 尺寸 第13部分：立式砂轮机用去毛刺和荒磨砂轮 |
China National Standards R |
English PDF |
| GB/T 4127.12-2008 |
Bonded abRasive products - Dimensions - Part 12: Grinding wheels for deburring and fettling on a straight grinder 固结磨具 尺寸 第12部分：直向砂轮机用去毛刺和荒磨砂轮 |
China National Standards R |
English PDF |
| GB/T 4127.11-2008 |
Bonded abRasive products - Dimensions - Part 11：Hand finishing sticks 固结磨具 尺寸 第11部分：手持抛光磨石 |
China National Standards R |
English PDF |
| GB/T 4127.10-2008 |
Bonded abRasive products - Dimensions - Part 10: Stones for honing and superfinishings 固结磨具 尺寸 第10部分：珩磨和超精磨磨石 |
China National Standards R |
English PDF |
| GB/T 2485-2008 |
Bonded abRasive products - Technical specifications 固结磨具 技术条件 |
China National Standards R |
English PDF |
| GB/T 2480-2008 |
Conventional abRasive - Silicon carbide 普通磨料 碳化硅 |
China National Standards R |
English PDF |
| GB/T 2479-2008 |
Conventional abRasive - White fused alumina 普通磨料 白刚玉 |
China National Standards R |
English PDF |
| GB/T 2478-2008 |
Conventional abRasive - Brown fused alumina 普通磨料 棕刚玉 |
China National Standards R |
English PDF |
| GB/T 21960-2008 |
The testing method and accepting condition of the dRiver’s seat on agricultural and forestry tractors 农林拖拉机驾驶座试验方法和验收条件 |
China National Standards R |
English PDF |
| GB/T 21959-2008 |
TRactor-trailer combination - Specifications 拖拉机运输机组 技术条件 |
China National Standards R |
English PDF |
| GB/T 21958-2008 |
FRont drive axle for wheeled tractor 轮式拖拉机 前驱动桥 |
China National Standards R |
English PDF |
| GB/T 21957-2008 |
The fatigue-life testing method of the axle shaft and dRive shaft on the test stand，wheeled agricultural tractor 农业轮式拖拉机半轴和驱动轴 台架疲劳寿命试验方法 |
China National Standards R |
English PDF |
| GB/T 21956.3-2008 |
The stRength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3：Static testing method of rear mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第3部分：后置式静态试验方法 |
China National Standards R |
English PDF |
| GB/T 21956.2-2008 |
The stRength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2：Dynamic testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第2部分：前置式动态试验方法 |
China National Standards R |
English PDF |
| GB/T 21956.1-2008 |
The stRength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1：Static testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第1部分：前置式静态试验方法 |
China National Standards R |
English PDF |
| GB/T 21955-2008 |
TRactors and machinery for agriculture and forestry - Paper friction disc - Technical specifications 农林拖拉机和机械 纸基摩擦片 技术条件 |
China National Standards R |
English PDF |
| GB/T 21954.2-2008 |
Metal cutting band saw blades - PaRt 2：Characteristics and dimensions 金属切割带锯条 第2部分：特性和尺寸 |
China National Standards R |
English PDF |
| GB/T 21954.1-2008 |
Metal cutting band saw blades - PaRt 1：Terms 金属切割带锯条 第1部分：术语 |
China National Standards R |
English PDF |
| GB/T 21953-2008 |
Single point cutting tool - CoRner radii 单刃刀具 刀尖圆弧半径 |
China National Standards R |
English PDF |
| GB/T 21952-2008 |
PolycRystalline diamond inserts,tipped - Dimensions 镶聚晶金刚石刀片 尺寸 |
China National Standards R |
English PDF |
| GB/T 21951-2008 |
Cubic boRon nitride inserts,tipped or solid - Dimensions 镶或整体立方氮化硼刀片 尺寸 |
China National Standards R |
English PDF |
| GB/T 21950-2008 |
Plunge shaving cutteRs 盘形径向剃齿刀 |
China National Standards R |
English PDF |
| GB/T 21949.2-2008 |
CNC univeRsal tool milling machines - Part 2: Specifications 数控万能工具铣床 第2部分：技术条件 |
China National Standards R |
English PDF |
| GB/T 21949.1-2008 |
CNC univeRsal tool milling machines - Part 1: Testing of the accuracy 数控万能工具铣床 第1部分：精度检验 |
China National Standards R |
English PDF |
| GB/T 21948.2-2008 |
Test conditions foR CNC milling machines with table of variable height - Testing of accuracy - Part 2: Machines with vertical spindle 数控升降台铣床检验条件 精度检验 第2部分：立式铣床 |
China National Standards R |
English PDF |
| GB/T 21948.1-2008 |
Test conditions foR CNC milling machines with table of variable height - Testing of accuracy - Part 1: Machines with horizontal spindle 数控升降台铣床检验条件 精度检验 第1部分：卧式铣床 |
China National Standards R |
English PDF |
| GB/T 21947-2008 |
NumeRically milling machines for special screws - Testing of the accuracy 数控异型螺杆铣床 精度检验 |
China National Standards R |
English PDF |
| GB/T 21946-2008 |
NumeRical control gear shaving machines - Testing of the accuracy 数控剃齿机 精度检验 |
China National Standards R |
English PDF |
| GB/T 21945-2008 |
NumeRical control sector gear shaping machines - Testing of the accuracy 数控扇形齿轮插齿机 精度检验 |
China National Standards R |
English PDF |
| GB/T 21944.3-2008 |
Special pRoducts of silicon carbide - Kiln furniture of reaction bonded silicon carbide - Part 3：Rollers 碳化硅特种制品 反应烧结碳化硅窑具 第3部分：辊棒 |
China National Standards R |
English PDF |
| GB/T 21944.1-2008 |
Special pRoducts of silicon carbide - Kiln furniture of reaction bonded silicon carbide - Part 1：Beam 碳化硅特种制品 反应烧结碳化硅窑具 第1部分：方梁 |
China National Standards R |
English PDF |
| GB/T 21943-2008 |
Back-up pads foR vulcanized fibre discs 钢纸砂盘支撑托盘 |
China National Standards R |
English PDF |
| GB/T 21942-2008 |
EaRth-moving machinery - Loader and front loading excavator buckets - Volumetric ratings 土方机械 装载机和正铲挖掘机的铲斗 容量标定 |
China National Standards R |
English PDF |
| Find out:54932Items | To Page of: First -Previous-Next -Last | [407] [408] [409] [410] [411] [412] [413] |
+86-755-25831330
