GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB 20912-2007 |
VapoRizer /pressure regulator of LPG vehicle 汽车用液化石油气蒸发调节器 |
China National Standards R |
English PDF |
GB 50397-2007 |
Code foR acceptance of electrical construction installation in metallurgy 冶金电气设备工程安装验收规范 |
China National Standards R |
English PDF |
GB 20922-2007 |
The Reuse of urban recycling water - Quality of farmland irrigation water 城市污水再生利用 农田灌溉用水水质 |
China National Standards R |
English PDF |
GB 50501-2007 |
Code of valuation with bill quantity of wateR conservancy constrution works 水利工程工程量清单计价规范 |
China National Standards R |
English PDF |
GB 18176-2007 |
Limits and measuRement methods for emissions of pollutants from mopeds on the running mode(CHINA stage III) 轻便摩托车污染物排放限值及测量方法(工况法,中国第III阶段) |
China National Standards R |
English PDF |
GB 14622-2007 |
Limits and measuRement methods for the emissions of pollutants from motorcycles on the running mode(CHINA stage III) 摩托车污染物排放限值及测量方法(工况法,中国第III阶段) |
China National Standards R |
English PDF |
GB 20890-2007 |
Test pRocedures and requirement of durability of emission control systems for heavy-duty vehicles 重型汽车排气污染物排放控制系统耐久性要求及试验方法 |
China National Standards R |
English PDF |
GB/T 20915.2-2007 |
Stamping dies - ElastomeR pressure springs - Part 2: Specification of accessories 冲模 弹性体压缩弹簧 第2部分:附件规格 |
China National Standards R |
English PDF |
GB/T 20915.1-2007 |
Stamping dies - ElastomeR pressure springs - Part 1: General specification 冲模 弹性体压缩弹簧 第1部分:通用规格 |
China National Standards R |
English PDF |
GB/T 20914.2-2007 |
Stamping dies - Gas spRings - Part 2: Specification of accessories 冲模 氮气弹簧 第2部分:附件规格 |
China National Standards R |
English PDF |
GB/T 20914.1-2007 |
Stamping dies - Gas spRings - Part 1: General specification 冲模 氮气弹簧 第1部分:通用规格 |
China National Standards R |
English PDF |
GB 50127-2007 |
Technical standaRd for aerial ropeway engineering 架空索道工程技术规范 |
China National Standards R |
English PDF |
GB/T 4202-2007 |
Designation foR glass fibres 玻璃纤维产品代号 |
China National Standards R |
English PDF |
GB/T 328.9-2007 |
Test methods foR building sheets for waterproofing - Part 9: Plastic and rubber sheets for waterproofing-tensile properties 建筑防水卷材试验方法 第9部分:高分子防水卷材 拉伸性能 |
China National Standards R |
English PDF |
GB/T 328.8-2007 |
Test methodSs foR building sheets for waterproofing - part 8: Bitumen sheets for waterproofing-tensile properties 建筑防水卷材试验方法 第8部分:沥青防水卷材 拉伸性能 |
China National Standards R |
English PDF |
GB/T 328.7-2007 |
Test methods foR building sheets for waterproofing - Part 7: Plastic and rubber sheets for waterproofing-length,width,straightness and flatness 建筑防水卷材试验方法 第7部分:高分子防水卷材 长度、宽度、平直度和平整度 |
China National Standards R |
English PDF |
GB/T 328.6-2007 |
Test methods foR building sheets for waterproofing - Part 6: Bitumen sheets for waterproofing-length,width and straightness 建筑防水卷材试验方法 第6部分:沥青防水卷材 长度、宽度和平直度 |
China National Standards R |
English PDF |
GB/T 328.5-2007 |
Test methods foR building sheets for waterproofing - Part 5: Plastic and rubber sheets for waterproofing-thickness and mass per unit area 建筑防水卷材试验方法 第5部分:高分子防水卷材 厚度、单位面积质量 |
China National Standards R |
English PDF |
GB/T 328.4-2007 |
Test methods foR building sheets for waterproofing - Part 4: Bitumen sheets for waterproofing-thickness and mass per unit area 建筑防水卷材试验方法 第4部分:沥青防水卷材 厚度、单位面积质量 |
China National Standards R |
English PDF |
GB/T 328.3-2007 |
Test methods foR building sheets for waterproofing - Part 3: Plastic and rubber sheets for waterproofing-visible defects 建筑防水卷材试验方法 第3部分:高分子防水卷材 外观 |
China National Standards R |
English PDF |
GB/T 328.27-2007 |
Test methods foR building sheets for waterproofing - Part 27: Bitumen,plastic and rubber sheets for waterproofing-water absorption 建筑防水卷材试验方法 第27部分:沥青和高分子防水卷材 吸水性 |
China National Standards R |
English PDF |
GB/T 328.26-2007 |
Test methods foR building sheets for waterproofing - Part 26: Bitumen sheets for waterproofing-dissoulble composite of membrane (impregnated and coated asphalt amount) 建筑防水卷材试验方法 第26部分:沥青防水卷材 可溶物含量(浸涂材料含量) |
China National Standards R |
English PDF |
GB/T 328.25-2007 |
Test methods foR building sheets for waterproofing - part 25: Bitumen,plastic and rubber sheets for waterproofing-resistance to static loading 建筑防水卷材试验方法 第25部分:沥青和高分子防水卷材 抗静态荷载 |
China National Standards R |
English PDF |
GB/T 328.24-2007 |
Test methods foR building sheets for waterproofing - Part 24: Bitumen,plastic and rubber sheets for waterproofing-resistance to impact 建筑防水卷材试验方法 第24部分:沥青和高分子防水卷材 抗冲击性能 |
China National Standards R |
English PDF |
GB/T 328.23-2007 |
Test methods foR building sheets for waterproofing - Part 23: Plastic and rubber sheets for waterproofing-resistance to shearing of joints 建筑防水卷材试验方法 第23部分:高分子防水卷材 接缝剪切性能 |
China National Standards R |
English PDF |
GB/T 328.22-2007 |
Test methods foe building sheets foR waterproofing - Part 22: Bitumen sheets for waterproofing-resistance to shearing of joints 建筑防水卷材试验方法 第22部分:沥青防水卷材 接缝剪切性能 |
China National Standards R |
English PDF |
GB/T 328.2-2007 |
Test methods foR building sheets for waterproofing - part 2: Bitumen sheets for waterproofing-visible defects 建筑防水卷材试验方法 第2部分:沥青防水卷材 外观 |
China National Standards R |
English PDF |
GB/T 328.21-2007 |
Test method foR building sheets for waterproofing - Part 21: Palstic and rubber sheets for waterproofing-resistance to peeling of joints 建筑防水卷材试验方法 第21部分:高分子防水卷材 接缝剥离性能 |
China National Standards R |
English PDF |
GB/T 328.20-2007 |
Test methods foR building sheets for waterproofing - Part 20: Bitumen sheets for waterproofing-resistance to peeling of joints 建筑防水卷材试验方法 第20部分:沥青防水卷材 接缝剥离性能 |
China National Standards R |
English PDF |
GB/T 328.19-2007 |
Test methods foR building sheets for waterproofing - Part 19: Plastic and rubber sheets for waterproofing-resistance to tearing 建筑防水卷材试验方法 第19部分:高分子防水卷材 撕裂性能 |
China National Standards R |
English PDF |
GB/T 328.18-2007 |
Test methods foR building sheets for waterproofing - Part 18: Bitumen sheets for waterproofing-resistance to tearing(nail shank) 建筑防水卷材试验方法 第18部分:沥青防水卷材 撕裂性能(钉杆法) |
China National Standards R |
English PDF |
GB/T 328.17-2007 |
Test methods foR building sheets for waterproofing - Part 17: Bitumen sheets for waterproofing-adhesion of granules 建筑防水卷材试验方法 第17部分:沥青防水卷材 矿物料粘附性 |
China National Standards R |
English PDF |
GB/T 328.16-2007 |
Test methods foR building sheets for waterproofing - Part 16: Plastic and rubber sheets for waterproofing-exposure to liquid chemicals including water 建筑防水卷材试验方法 第16部分:高分子防水卷材 耐化学液体(包括水) |
China National Standards R |
English PDF |
GB/T 328.15-2007 |
Test methods foR building sheets for waterproofing - Part 15: Plastic and rubber sheets for waterproof-foldability at low temperature 建筑防水卷材试验方法 第15部分:高分子防水卷材 低温弯折性 |
China National Standards R |
English PDF |
GB/T 328.14-2007 |
Test methods foR building sheets for waterproofing - Part 14: Bitumen sheets for waterproofing-flexibility at low temperature 建筑防水卷材试验方法 第14部分:沥青防水卷材 低温柔性 |
China National Standards R |
English PDF |
GB/T 328.13-2007 |
Test methods foR building sheets for waterproofing - Part 13: Plastic and rubber sheets for waterproofing-dimensional stability 建筑防水卷材试验方法 第13部分:高分子防水卷材 尺寸稳定性 |
China National Standards R |
English PDF |
GB/T 328.12-2007 |
Test methods foR building sheets for waterproofing - Part 12: Bitumen sheets for waterproofing-dimensional stability 建筑防水卷材试验方法 第12部分:沥青防水卷材 尺寸稳定性 |
China National Standards R |
English PDF |
GB/T 328.1-2007 |
Test methods foR building sheets for waterproofing - Part 1: Bitumen,plastic and rubber sheets for waterproofing-rules for sampling 建筑防水卷材试验方法 第1部分:沥青和高分子防水卷材 抽样规则 |
China National Standards R |
English PDF |
GB/T 328.11-2007 |
Test methods foR building sheets for waterproofing - Part 11: Bitumen sheets for waterproofing-flow resistance at elevated temperature 建筑防水卷材试验方法 第11部分:沥青防水卷材 耐热性 |
China National Standards R |
English PDF |
GB/T 328.10-2007 |
Test methods foR building sheets for waterproofing - Part 10: Bitumen,plastic and rubber sheets for waterproofing-watertightness 建筑防水卷材试验方法 第10部分:沥青和高分子防水卷材 不透水性 |
China National Standards R |
English PDF |
GB/T 17470-2007 |
Glass fibeR mats - chopped strand and continuous filament mats 玻璃纤维短切原丝毡和连续原丝毡 |
China National Standards R |
English PDF |
GB/T 12960-2007 |
Quantitative deteRmination of constituents of cement 水泥组分的定量测定 |
China National Standards R |
English PDF |
GB 20906-2007 |
Safety Requirements for high pressure metal die casting units 压铸单元安全技术要求 |
China National Standards R |
English PDF |
GB 20905-2007 |
Safety Requirements for foundry machinery 铸造机械 安全要求 |
China National Standards R |
English PDF |
GB 20904-2007 |
HoRizontal directional drilling - Safety operation rules 水平定向钻机 安全操作规程 |
China National Standards R |
English PDF |
GB 10055-2007 |
Safety code foR builder’s hoist 施工升降机安全规程 |
China National Standards R |
English PDF |
GB/T 20898.3-2007 |
ImmeRsion suits - Part 3: Test methods 浸水服 第3部分:试验方法 |
China National Standards R |
English PDF |
GB/T 20898.2-2007 |
ImmeRsion suits - Part 2: Abandonment suits,requirements including safety 浸水服 第2部分:弃船服安全要求 |
China National Standards R |
English PDF |
GB/T 20898.1-2007 |
ImmeRsion suits - Part 1: Constant wear suits,requirements including safety 浸水服 第1部分:常穿服安全要求 |
China National Standards R |
English PDF |
GB/T 20897.1-2007 |
Inflatable boats - PaRt 1: Boats with a maximum motor power rating of 4.5kW 充气艇 第1部分:发动机最大额定功率为4.5kW的艇 |
China National Standards R |
English PDF |
GB/T 20896-2007 |
Small cRaft - Watertight cockpits and quick-draining cockpits 小艇 水密艉舱和快速泄水艉舱 |
China National Standards R |
English PDF |
GB/T 20895.3-2007 |
Small cRaft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6m 小艇 稳性和浮性的评定与分类 第3部分:艇体长度小于6m的艇 |
China National Standards R |
English PDF |
GB/T 20895.2-2007 |
Small cRaft - Stability and buoyancy assessment and categorization - part 2: Sailing boats of hull length greater than or equal to 6m 小艇 稳性和浮性的评定与分类 第2部分:艇体长度不小于6m的帆艇 |
China National Standards R |
English PDF |
GB/T 20895.1-2007 |
Small cRaft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6m 小艇 稳性和浮性的评定与分类 第1部分:艇体长度不小于6m的非帆艇 |
China National Standards R |
English PDF |
GB/T 20894-2007 |
Small cRaft - Liquid-fuelled galley stoves 小艇 液体燃料厨灶 |
China National Standards R |
English PDF |
GB/T 20862-2007 |
DiRectives of the calculation method for recoverability rate of products 产品可回收利用率计算方法导则 |
China National Standards R |
English PDF |
GB/T 20861-2007 |
TeRminology of waste product recovery 废弃产品回收利用术语 |
China National Standards R |
English PDF |
GB/T 20860-2007 |
Packaging - Sacks made fRom thermoplastic flexible film - Tear propagation on edge folds 包装 热塑性软质薄膜袋 折边处撕裂扩展试验方法 |
China National Standards R |
English PDF |
GB/T 20859-2007 |
Packaging - Sacks - DeteRmination of the friction of filled sacks 包装 袋 满装袋摩擦力的测定 |
China National Standards R |
English PDF |
GB/T 20858-2007 |
Glass containeRs - Determination of capacity by gravimetric method - Test method 玻璃容器 用重量法测定容量的试验方法 |
China National Standards R |
English PDF |
GB 50396-2007 |
Code of design foR access control systems engineering 出入口控制系统工程设计规范 |
China National Standards R |
English PDF |
GB 50395-2007 |
Code of design foR video monitoring system 视频安防监控系统工程设计规范 |
China National Standards R |
English PDF |
GB 50394-2007 |
Code foR design for intrusion alarm systems engineering 入侵报警系统工程设计规范 |
China National Standards R |
English PDF |
GB/T 6960.7-2007 |
TRactor terminology - Part 7: Cab, seat and sheet metal 拖拉机术语 第7部分:驾驶室、驾驶座和覆盖件 |
China National Standards R |
English PDF |
GB/T 6960.6-2007 |
TRactor terminology - Part 6: Hydraulic hitch system and drawbar, hook 拖拉机术语 第6部分: 液压悬挂系及牵引、拖挂装置 |
China National Standards R |
English PDF |
GB/T 6960.5-2007 |
TRactors terminology - Part 5: Steering system 拖拉机术语 第5部分:转向系 |
China National Standards R |
English PDF |
GB/T 6960.4-2007 |
TRactor terminology - Part 4: Running gears and undercarriages 拖拉机术语 第4部分:行走系 |
China National Standards R |
English PDF |
GB/T 6960.3-2007 |
TRactor terminology - Part 3: Braking system 拖拉机术语 第3部分: 制动系 |
China National Standards R |
English PDF |
GB/T 6960.2-2007 |
TRactor terminology - Part 2: Transmission system 拖拉机术语 第2部分:传动系 |
China National Standards R |
English PDF |
GB/T 6960.1-2007 |
TRactor terminology - Part 1: Complete tractor 拖拉机术语 第1部分: 整机 |
China National Standards R |
English PDF |
GB/T 20865-2007 |
No-tillage feRtile-seeding drill 免耕施肥播种机 |
China National Standards R |
English PDF |
GB/T 20864-2007 |
Rice transplanter - Specification 水稻插秧机 技术条件 |
China National Standards R |
English PDF |
GB/T 20863.5-2007 |
CRanes - Classification - Part 5: Overhead travelling and portal bridge cranes 起重机 分级 第5部分: 桥式和门式起重机 |
China National Standards R |
English PDF |
GB/T 20863.4-2007 |
CRanes - Classification - Part 4: Jib cranes 起重机械 分级 第4部分: 臂架起重机 |
China National Standards R |
English PDF |
GB/T 20863.3-2007 |
CRanes - Classification - Part :3 Tower cranes 起重机械 分级 第3部分: 塔式起重机 |
China National Standards R |
English PDF |
GB/T 20863.2-2007 |
CRanes - Classification - Part :2 Mobile cranes 起重机械 分级 第2部分: 流动式起重机 |
China National Standards R |
English PDF |
GB/T 20863.1-2007 |
CRanes - Classification - Part 1: General 起重机械 分级 第1部分:总则 |
China National Standards R |
English PDF |
GB/T 13876-2007 |
AgRicultural wheeled tractors - Evalution criteria of whole body vibration of the operator 农业轮式拖拉机驾驶员全身振动的评价指标 |
China National Standards R |
English PDF |
GB/T 20851.5-2007 |
ElectRonic toll collection - Dedicated short range communication - Part 5: Test methods of the main parameters in physical layer 电子收费 专用短程通信 第5部分:物理层主要参数测试方法 |
China National Standards R |
English PDF |
GB/T 20851.4-2007 |
ElectRonic toll collection - Dedicated short range communication - Part 4: Equipment application 电子收费 专用短程通信 第4部分:设备应用 |
China National Standards R |
English PDF |
GB/T 20851.3-2007 |
ElectRonic toll collection - Dedicated short range communication - Part 3: Application layer 电子收费 专用短程通信 第3部分:应用层 |
China National Standards R |
English PDF |
GB/T 20851.2-2007 |
ElectRonic toll collection - Dedicated short range communication - Part 2: Data link layer 电子收费 专用短程通信 第2部分:数据链路层 |
China National Standards R |
English PDF |
GB/T 20851.1-2007 |
ElectRonic toll collection - Dedicated short range communication - Part 1: Physical layer 电子收费 专用短程通信 第1部分:物理层 |
China National Standards R |
English PDF |
GB/T 20839-2007 |
Intelligent tRansport systems - General terminology 智能运输系统 通用术语 |
China National Standards R |
English PDF |
GB/T 4461-2007 |
TheRmostat bimetal strip 热双金属带材 |
China National Standards R |
English PDF |
GB/T 4238-2007 |
Heat-Resisting steel plate, sheet and strip 耐热钢钢板和钢带 |
China National Standards R |
English PDF |
GB/T 4237-2007 |
Hot Rolled stainless steel plate, sheet and strip 不锈钢热轧钢板和钢带 |
China National Standards R |
English PDF |
GB/T 3280-2007 |
Cold Rolled stainless steel plate, sheet and strip 不锈钢冷轧钢板和钢带 |
China National Standards R |
English PDF |
GB/T 223.40-2007 |
IRon, steel and alloy - Determination of niobium content - The sulphochlorophenol S spectrophotometric method 钢铁及合金 铌含量的测定 氯磺酚S分光光度法 |
China National Standards R |
English PDF |
GB/T 20887.1-2007 |
Continuously hot Rolled high strength steel sheet and strip for automobile - Part 1: High yield strength steel for cold forming 汽车用高强度热连轧钢板及钢带 第1部分:冷成形用高屈服强度钢 |
China National Standards R |
English PDF |
GB/T 20878-2007 |
Stainless and heat-Resisting steels - Designation and chemical composition 不锈钢和耐热钢 牌号及化学成分 |
China National Standards R |
English PDF |
GB/T 20854-2007 |
CoRrosion of metals and alloys - accelerated testing involving cyclic exposure to salt mist, “dry“ and “wet“ condition 金属和合金的腐蚀 循环暴露在盐雾、“干”和“湿”条件下的加速试验 |
China National Standards R |
English PDF |
GB/T 20853-2007 |
CoRrosion of metals and alloys - corrosion in artificial atmosphere - accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution 金属和合金的腐蚀 人造大气中的腐蚀 暴露于间歇喷洒盐溶液和潮湿循环受控条件下的加速腐蚀试验 |
China National Standards R |
English PDF |
GB/T 20852-2007 |
CoRrosion of metals and alloys - guidelines for selection of protection methods against atmospheric corrosion 金属和合金的腐蚀 大气腐蚀防护方法的选择导则 |
China National Standards R |
English PDF |
GB/T 20564.3-2007 |
Continuously cold Rolled high strength steel sheet and strip for automobile - Part 3: High strength interstitial free steel 汽车用高强度冷连轧钢板及钢带 第3部分:高强度无间隙原子钢 |
China National Standards R |
English PDF |
GB/T 20564.1-2007 |
Continuously cold Rolled high strength steel sheet and strip for automobile - Part 1:Bake hardening steel 汽车用高强度冷连轧钢板及钢带 第1部分:烘烤硬化钢 |
China National Standards R |
English PDF |
GB/T 20855-2007 |
City codes foR air transportation 航空运输城市地名代码 |
China National Standards R |
English PDF |
GB/T 18360-2007 |
Evaluation of public aiR transport service quality 公共航空运输服务质量评定 |
China National Standards R |
English PDF |
GB/T 16821-2007 |
GeneRal test methods of power supply equipments for telecommunications 通信用电源设备通用试验方法 |
China National Standards R |
English PDF |
GB/T 16177-2007 |
Quality of public aiR transport service 公共航空运输服务质量 |
China National Standards R |
English PDF |
Find out:54932Items | To Page of: First -Previous-Next -Last | [435] [436] [437] [438] [439] [440] [441] |