Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 6044-2005 |
Analogue quaRtz watches 指针式石英手表 |
China National Standards R |
 English PDF |
| GB/T 461.3-2005 |
PapeR and board-Determination of water absorption(immersion in water) 纸和纸板 吸水性的测定(浸水法) |
China National Standards R |
English PDF |
| GB/T 3903.9-2005 |
FootweaR-Test methods for insoles-Heel pin holding strengh 鞋类-内底试验方法-跟部持钉力 |
China National Standards R |
English PDF |
| GB/T 3903.8-2005 |
FootweaR-Test methods for insoles-Delamination resistance 鞋类-内底试验方法-层间剥离强度 |
China National Standards R |
English PDF |
| GB/T 2679.7-2005 |
BoaRd-Determination of puncture resistance 纸板 戳穿强度的测定 |
China National Standards R |
English PDF |
| GB/T 19942-2005 |
LeatheR and Fur-Chemical tests-Determination of banned azo colourants 皮革和毛皮 化学试验 禁用偶氮染料的测定 |
China National Standards R |
English PDF |
| GB/T 19941-2005 |
LeatheR and Fur-Chemical tests-Determination of formaldehyde content 皮革和毛皮 化学试验 甲醛含量的测定 |
China National Standards R |
English PDF |
| GB/T 19940-2005 |
ChRome powder-Determination of chromium(VI) 粉状铬鞣剂 六价铬离子测定方法 |
China National Standards R |
English PDF |
| GB/T 1543-2005 |
PapeR and board-Determination of Opacity(paper backing)-Diffuse reflectance method 纸和纸板 不透明度(纸背衬)的测定(漫反射法) |
China National Standards R |
English PDF |
| GB/T 12032-2005 |
PapeR and board-preparation of a offset print for test gloss 纸和纸板 印刷光泽度印样的制备 |
China National Standards R |
English PDF |
| GB/T 19907-2005 |
PRoduct of geographicl indication-Xiaoshan Dehydrated pickle-turnip 地理标志产品 萧山萝卜干 |
China National Standards R |
English PDF |
| GB/T 19906-2005 |
PRoduct of geographical indication-Baoying lotus root 地理标志产品 宝应荷(莲)藕 |
China National Standards R |
English PDF |
| GB/T 19909-2005 |
PRoduct of geographical indication-Castanea henryi(skan)Rehd.et wils Jianou 地理标志产品 建瓯锥栗 |
China National Standards R |
English PDF |
| GB/T 19908-2005 |
PRoduct of designations of origin or geographical indication-Tangqi loquat 地理标志产品 塘栖枇杷 |
China National Standards R |
English PDF |
| GB/T 3903.6-2005 |
FootweaR-Determination of slip resistance 鞋类通用试验方法-防滑性能 |
China National Standards R |
English PDF |
| GB/T 19879-2005 |
Steel Plates FoR Building Structure 建筑结构用钢板 |
China National Standards R |
English PDF |
| GB/T 7253-2005 |
InsulatoRs for overhead lines with a nominal voltage above 1000V -- Ceramic or glass insulator units for a.c.systems -- Charateristics of insulator units of the cap and pin type 标称电压高于1000V的架空线路绝缘子 交流系统用瓷或玻璃绝缘子元件 盘形悬式绝缘子元件的特性 |
China National Standards R |
English PDF |
| GB/T 5170.18-2005 |
Inspection methods foR basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperature/humidity cyclic testing equipments 电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备 |
China National Standards R |
English PDF |
| GB/T 2424.2-2005 |
EnviRonmental Testing for electric and electronic products -- Guidance for damp heat tests 电工电子产品环境试验 湿热试验导则 |
China National Standards R |
English PDF |
| GB/T 20043-2005 |
Field Acceptance Test to DeteRmine the Hydraulic Performance of Hydraulic Turbine,storage pumps and pump-turbines 水轮机、蓄能泵和水泵水轮机水力性能现场验收试验规程 |
China National Standards R |
English PDF |
| GB/T 20042.1-2005 |
PRoton Exchange Membrane Fuel Cell -- Terminology 质子交换膜燃料电池 术语 |
China National Standards R |
English PDF |
| GB/T 17951-2005 |
StandaRd specification for magnetically hard materials 硬磁材料一般技术条件 |
China National Standards R |
English PDF |
| GB/T 10762-2005 |
Method of mass measuRement for industrial and mining electric locomotive 工矿电机车重量测定方法 |
China National Standards R |
English PDF |
| GB/T 7679.4-2005 |
Mining machineRy terminology Part 4:Mine hauling equipment 矿山机械术语 第4部分：矿用运输设备 |
China National Standards R |
English PDF |
| GB/T 7679.3-2005 |
Mining machineRy terminology Part 3:Winding equipment 矿山机械术语 第3部分：提升设备 |
China National Standards R |
English PDF |
| GB/T 7679.2-2005 |
Mining machineRy terminology Part 2:Loading cquipment 矿山机械术语 第2部分：装载设备 |
China National Standards R |
English PDF |
| GB/T 7679.1-2005 |
Mining machineRy terminology Part 1:Mining cquipment 矿山机械术语 第1部分：采掘设备 |
China National Standards R |
English PDF |
| GB/T 6404.2-2005 |
Acceptance code foR gear units-Part2:Determination of mechanical vibrations of gear units during acceptance testing 齿轮装置的验收规范 第2部分：验收试验中齿轮装置机械振动的测定 |
China National Standards R |
English PDF |
| GB/T 6404.1-2005 |
Acceptance code foR gear units-Part1:Test code for airborne sound 齿轮装置的验收规范 第1部分：空气传播噪声的试验规范 |
China National Standards R |
English PDF |
| GB/T 4307-2005 |
Lifting hook-NomenclatuRe 起重吊钩 术语 |
China National Standards R |
English PDF |
| GB/T 3871.12-2005 |
AgRicultural Tractors-Test procedures-Part 12:Working Tests 农业拖拉机 试验规程 第12部分 使用试验 |
China National Standards R |
English PDF |
| GB/T 3871.11-2005 |
AgRicultural tractors-Test procedures-Part 11:Suitability tests for hot atmosphere 农业拖拉机 试验规程 第11部分：高温性能试验 |
China National Standards R |
English PDF |
| GB/T 3452.3-2005 |
Housing dimensions foR O-ring elastomer seals in hydraulic and pneumatic applications 液压气动用O形橡胶密封圈 沟槽尺寸 |
China National Standards R |
English PDF |
| GB/T 3216-2005 |
Rotodynamic pumps-Hdraulic peformance acceptance tests-Grades 1 and 2 回转动力泵 水力性能验收试验 1级和2级 |
China National Standards R |
English PDF |
| GB/T 6826-2005 |
SeRial type of mineral processing equipment 洗选设备 系列型谱 |
China National Standards R |
English PDF |
| GB/T 2353-2005 |
Dimension seRies and identification code for mounting flanges and shaft ends of hydraulic pumps and motors 液压泵及马达的安装法兰和轴伸的尺寸系列及标注代号 |
China National Standards R |
English PDF |
| GB/T 19956.2-2005 |
Positive-displacement cacuum pumps-MeasuRement of performance characteristics Part2:Measurement of ultimate pressure 容积真空泵性能测量方法 第2部分：极限压力的测量 |
China National Standards R |
English PDF |
| GB/T 19956.1-2005 |
Positive-displacement cacuum pumps-MeasuRement of performance characteristics Part1:Measurement of volume rate of flow(pumping speed) 容积真空泵性能测量方法 第1部分：体积流率（抽速）的测量 |
China National Standards R |
English PDF |
| GB/T 19955.2-2005 |
VapouR vacuum pumps-Measurement of performance characteristics Part2:Measurement of critical backing pressure 蒸汽流真空泵性能测量方法 第2部分：临界前级压力的测量 |
China National Standards R |
English PDF |
| GB/T 19955.1-2005 |
VapouR vacuum pumps-Measurement of performance characteristics Part1:Measurement of volume rate of flow(pumping speed) 蒸汽流真空泵性能测量方法 第1部分：体积流率（抽速）的测量 |
China National Standards R |
English PDF |
| GB/T 19943-2005 |
Non-destRuctive testing-Radiographic examination of metallic materials by X-and gamma-rays-Basic rules 无损检测 金属材料X和伽玛射线 照相检测 基本规则 |
China National Standards R |
English PDF |
| GB/T 19939-2005 |
Technical Requirements for Crid Connection of PV System 光伏系统并网技术要求 |
China National Standards R |
English PDF |
| GB/T 19936.1-2005 |
GeaRs-FZG test procedures-Part1:FZG test method A/8.3/90 for relative scuffing load-carrying capacity of oils 齿轮 FZG 试验程序 第1部分：油品的相对胶合承载能力 FZG 试验方法 A/8.3/90 |
China National Standards R |
English PDF |
| GB/T 19935-2005 |
WoRm gears-Geometry of worms-Name plates for worm gear units,centre distances,information to be supplied to gear manufacturer by the purchaser 蜗杆传动 蜗杆的几何参数-蜗杆装置的铭牌、中心距、用户提供给制造者的参数 |
China National Standards R |
English PDF |
| GB/T 19934.1-2005 |
HydRaulic fluid power-Fatigue pressure testing of metal pressure-containing envelopes-Part 1:Test method 液压传动 金属承压壳体的疲劳压力试验 第1部分：试验方法 |
China National Standards R |
English PDF |
| GB/T 19932-2005 |
EaRth-moving machinery-Hydraulic excavators-Laboratory tests and performance requirements for operator protective guards 土方机械 液压挖掘机 司机防护装置的试验室试验和性能要求 |
China National Standards R |
English PDF |
| GB/T 19931-2005 |
EaRth-moving machinery-Trenchers-Definitions and commercial specifications 土方机械 挖沟机 术语和商业规范 |
China National Standards R |
English PDF |
| GB/T 19930-2005 |
EaRth-moving machinery-Tip-Over Protection Structure(TOPS)for compact excavators-Laboratory tests and performance requirements 土方机械 小型挖掘机 倾翻保护结构的试验室试验和性能要求 |
China National Standards R |
English PDF |
| GB/T 19928-2005 |
EaRth-moving machinery-Lift capacity of pipelayers and wheeled tractors or loaders equipped with side boom 土方机械 吊管机和安装侧臂的轮胎式推土机或装载机的起重量 |
China National Standards R |
English PDF |
| GB/T 19927-2005 |
CRanked-link drag chains of welded construction,attachments and sprockets 曳引用焊接结构弯板链、附件和链轮 |
China National Standards R |
English PDF |
| GB/T 19926-2005 |
HydRaulic fluid power-Gas-loaded accumulators-Dimensions of gas port 液压传动 充气式蓄能器 气口尺寸 |
China National Standards R |
English PDF |
| GB/T 19925-2005 |
HydRaulic fluid power-Gas-loaded Accumulators with separator-Selection of preferred hydraulic port 液压传动 隔离式充气蓄能器 优先选择的液压油口 |
China National Standards R |
English PDF |
| GB/T 19924-2005 |
Mobile cRanes-Determination of stability 流动式起重机 稳定性的确定 |
China National Standards R |
English PDF |
| GB/T 19922-2005 |
StandaRd test methods for measuring site flatness on silicon wafers by noncontact scanning 硅片局部平整度非接触式标准测试方法 |
China National Standards R |
English PDF |
| GB/T 19921-2005 |
Test method of paRticles on silicon wafer surfaces 硅抛光片表面颗粒测试方法 |
China National Standards R |
English PDF |
| GB/T 1883.2-2005 |
Reciprocating internal combustion engines-Vocabulary-Part 2:Terms for engine maintenance 往复式内燃机 词汇 第2部分：发动机维修术语 |
China National Standards R |
English PDF |
| GB/T 1883.1-2005 |
Reciprocating internal combustion engines-Vocabulary-Part 1:Terms for engine design and operation 往复式内燃机 词汇 第1部分：发动机设计和运行术语 |
China National Standards R |
English PDF |
| GB/T 15822.3-2005 |
Non-destRuctive testing-Magnetic particle testing-Part 3:Equipment 无损检测 磁粉检测 第3部分：设备 |
China National Standards R |
English PDF |
| GB/T 15822.2-2005 |
Non-desstRuctive testing-Magnetic particle testing-Part 2:Detection media 无损检测 磁粉检测 第2部分：检测介质 |
China National Standards R |
English PDF |
| GB/T 15822.1-2005 |
Non-destRuctive testing-Magnetic particle testing-Part 1:General principles 无损检测 磁粉检测 第1部分：总则 |
China National Standards R |
English PDF |
| GB/T 15390-2005 |
CRanked-link mill chains of welded construction,attachments and sprockets 工程用焊接结构弯板链、附件和链轮 |
China National Standards R |
English PDF |
| GB/T 12965-2005 |
MonocRystalline silicon as cut slices and lapped slices 硅单晶切割片和研磨片 |
China National Standards R |
English PDF |
| GB/T 12962-2005 |
MonoccRystalline silicon 硅单晶 |
China National Standards R |
English PDF |
| GB/T 12604.2-2005 |
Non-destRuctive testing-Terminology-Terms used in radiographic testing 无损检测 术语 射线照相检测 |
China National Standards R |
English PDF |
| GB/T 12225-2005 |
GeneRal purpose industrial valves-Specification of copper alloy castings 通用阀门 铜合金铸件技术条件 |
China National Standards R |
English PDF |
| GB/T 12224-2005 |
GeneRal requirements for industrial steel valves 钢制阀门 一般要求 |
China National Standards R |
English PDF |
| GB/T 10913-2005 |
EaRth-woving machinery-Determination of ground speed 土方机械 行驶速度测定 |
China National Standards R |
English PDF |
| GB/T 10857-2005 |
Steel Roller chains,types S and C,attachments and sprockets S型和C型钢制滚子链条，附件和链轮 |
China National Standards R |
English PDF |
| GB/T 10598.2-2005 |
IndustRial test method of open-cut mine rotary blast hole drill 露天矿用牙轮钻机和旋转钻机 工业试验方法 |
China National Standards R |
English PDF |
| GB/T 10598.1-2005 |
Open-cut mine Rotary blast hole drill 露天矿用牙轮钻机和旋转钻机 |
China National Standards R |
English PDF |
| GB/T 9769-2005 |
Rim contour measure 轮辋轮廓检测 |
China National Standards R |
English PDF |
| GB/T 7985-2005 |
ConveyoR belts -- Method for the determination of the tear propagation resistance of textile conveyor belts 输送带 织物芯输送带抗撕裂扩大性试验方法 |
China National Standards R |
English PDF |
| GB/T 5754.2-2005 |
Steel coRd conveyor belt -- Longitudinal test -- Part 2: Measurement of tensile strength 钢丝绳芯输送带 纵向拉伸试验 第2部分:拉伸强度的测定 |
China National Standards R |
English PDF |
| GB/T 3515-2005 |
Rubber -- Determination of carbon black content -- Pyrolytic method 橡胶 炭黑含量的测定 热解法 |
China National Standards R |
English PDF |
| GB/T 3487-2005 |
Rim contour for motor vehicles 汽车轮辋规格系列 |
China National Standards R |
English PDF |
| GB/T 3402.1-2005 |
Plastics HomopolymeR and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifiations 塑料 氯乙烯均聚和共聚树脂 第1部分：命名体系和规范基础 |
China National Standards R |
English PDF |
| GB/T 20029-2005 |
Rubber isolation bearings for instruments and equipments 仪器 设备用橡胶隔震垫 |
China National Standards R |
English PDF |
| GB/T 20028-2005 |
Rubber,vulcanized or thermoplastic -- Estimation of life-time and maximum temperature of use from an Arrhenius plot 硫化橡胶或热塑性橡胶 应用阿累尼乌斯图推算寿命和最高使用温度 |
China National Standards R |
English PDF |
| GB/T 20027-2005 |
Rubber-or plastics-coated fabrics -- Determiation of bursting strength 橡胶或塑料涂覆织物 破裂强度的测定 |
China National Standards R |
English PDF |
| GB/T 20026-2005 |
Rubber and plastics hose -- Determination of abrasion of lining 橡胶和塑料软管 内衬层耐磨性测定 |
China National Standards R |
English PDF |
| GB/T 20025.2-2005 |
Rubber and plastics hoses and hose assemblise for automotive air conditioning -- Refrigerant 134a 汽车空调用橡胶和塑料软管及软管组合件 耐制冷剂134a |
China National Standards R |
English PDF |
| GB/T 20024-2005 |
Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammability 内燃机用橡胶和塑料燃油软管 可燃性试验方法 |
China National Standards R |
English PDF |
| GB/T 20023-2005 |
Rubber and/or plastics hoses and hoses assemblies for airless paint spraying 无气喷涂用橡胶和/或塑料软管及软管组合件 |
China National Standards R |
English PDF |
| GB/T 20022-2005 |
Plastics -- HomopolymeR and Copolymer resins of vinyl chloride Determination of apparent density 塑料 氯乙烯均聚和共聚树脂表观密度的测定 |
China National Standards R |
English PDF |
| GB/T 20021-2005 |
Heat Resistant conveyor belts of duck construction 帆布芯耐热输送带 |
China National Standards R |
English PDF |
| GB/T 1695-2005 |
Rubber,vulcanized -- Determination of electrical breakdown strength and voltage resistant at commercial power frequency 硫化橡胶 工频击穿电压强度和耐电压的测定方法 |
China National Standards R |
English PDF |
| GB/T 3903.7-2005 |
FootweaR-Ageing conditioning 鞋类通用试验方法-老化处理 |
China National Standards R |
English PDF |
| GB/T 3903.14-2005 |
FootweaR-Test methods for outsoles-Needle tear strength 鞋类-外底试验方法-针撕破强度 |
China National Standards R |
English PDF |
| GB/T 3903.13-2005 |
FootweaR-Test methods for outsoles-Dimensional stability 鞋类-外底试验方法-尺寸稳定性 |
China National Standards R |
English PDF |
| GB/T 3903.12-2005 |
FootweaR-Test methods for outsoles-Tear strengh 鞋类-外底试验方法-撕裂强度 |
China National Standards R |
English PDF |
| GB/T 3903.11-2005 |
FootweaR-Test methods for insoles,lining and insocks-perspiration resistance 鞋类-内底、衬里和内垫试验方法-耐汗性 |
China National Standards R |
English PDF |
| GB/T 3903.10-2005 |
FootweaR-Test methods for insoles-Dimensional stability 鞋类-内底试验方法-尺寸稳定性 |
China National Standards R |
English PDF |
| GB/Z 19027-2005 |
Guidance on statistical techniques foR GB/T19001-2000 GB/T19001-2000的统计技术指南 |
China National Standards R |
English PDF |
| GB/T 20032-2005 |
PRoject risk management -- Application guidelines 项目风险管理 应用指南 |
China National Standards R |
English PDF |
| GB/T 19016-2005 |
Quality management systems -- Guidelines foR quality management in projects 质量管理体系 项目质量管理指南 |
China National Standards R |
English PDF |
| GB 19891-2005 |
Safety of machineRy-Hygiene requirements for the design of machinery 机械安全 机械设计的卫生要求 |
China National Standards R |
English PDF |
| GB/T 4791-2005 |
GRaphical symbols for pipline accessory of ships 船舶管路附件图形符号 |
China National Standards R |
English PDF |
| GB/T 19920-2005 |
ContaineR buttress fitting for ships 船用集装箱支撑件 |
China National Standards R |
English PDF |
| GB/T 19919-2005 |
Small cRaft-Windows,portlights,hatches,deadlights and doors Strength and watertightness requirements 小艇 窗、舷窗、舱口盖、风暴盖和门 强度和密封性要求 |
China National Standards R |
English PDF |
| GB/T 19918-2005 |
Small cRaft-Graphical symbols 小艇 图形符号 |
China National Standards R |
English PDF |
| Find out:54932Items | To Page of: First -Previous-Next -Last | [456] [457] [458] [459] [460] [461] [462] |
+86-755-25831330
