GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 25796-2010 |
Reactive brilliant Yellow W-2G(C.I. Reactive yellow 39) 反应艳黄W-2G(C.I.反应黄39) |
China National Standards Y |
English PDF |
GB/T 25794-2010 |
Reactive golden Yellow KN-RNL(C.I. Reactive orange 107)and Reactive red M-RB(C.I. Reactive red 198) 反应金黄KN-RNL(C.I.反应橙107)及反应红M-RB(C.I.反应红198) |
China National Standards Y |
English PDF |
GB/T 25793-2010 |
Reactive Yellow KN-GR 150%(C.I. Reactive yellow 15) 反应黄KN-GR 150%(C.I.反应黄15) |
China National Standards Y |
English PDF |
GB/T 25789-2010 |
p-PhenYlenediamine 对苯二胺 |
China National Standards Y |
English PDF |
GB/T 25787-2010 |
4,4’-SulfonYldiphenol(Bisphenol-S) 4,4’-二羟基二苯砜(双酚S) |
China National Standards Y |
English PDF |
GB/T 25785-2010 |
2-Amino-4,6-dinitrophenol sodium(picramic acid sodium hYdrate) 2-氨基-4,6-二硝基酚钠(苦氨酸钠) |
China National Standards Y |
English PDF |
GB/T 25781-2010 |
1-NaphthYamine 1-萘胺 |
China National Standards Y |
English PDF |
GB/T 25758.5-2010 |
Non-destructive testing - Characteristics of focal spots in industrial X-raY systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes 无损检测 工业X射线系统焦点特性 第5部分:小焦点和微焦点X射线管的有效焦点尺寸的测量方法 |
China National Standards Y |
English PDF |
GB/T 25758.4-2010 |
Non-destructive testing - Characteristics of focal spots in industrial X-raY systems for use in non-destructive testing - Part 4: Edge method 无损检测 工业X射线系统焦点特性 第4部分:边缘方法 |
China National Standards Y |
English PDF |
GB/T 25758.3-2010 |
Non-destructive testing - Characteristics of focal spots in industrial X-raY systems for use in non-destructive testing - Part 3: Slit camera radiographic method 无损检测 工业X射线系统焦点特性 第3部分:狭缝照相机射线照相方法 |
China National Standards Y |
English PDF |
GB/T 25758.2-2010 |
Non-destructive testing - Characteristics of focal spots in industrial X-raY systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method 无损检测 工业X射线系统焦点特性 第2部分:针孔照相机射线照相方法 |
China National Standards Y |
English PDF |
GB/T 25758.1-2010 |
Non-destructive testing - Characteristics of focal spots in industrial X-raY systems for use in non-destructive testing - Part 1: Scanning method 无损检测 工业X射线系统焦点特性 第1部分:扫描方法 |
China National Standards Y |
English PDF |
GB/T 25757-2010 |
Non-destructive testing - Test methods of performance characteristics of automatic magnetic flux leakage testing sYstems for steel tubes 无损检测 钢管自动漏磁检测系统综合性能测试方法 |
China National Standards Y |
English PDF |
GB/T 25755-2010 |
Vacuum technologY - Sputter-ion pumps - Measurement of performance characteristics 真空技术 溅射离子泵 性能参数的测量 |
China National Standards Y |
English PDF |
GB/T 25754-2010 |
Vacuum technologY - Right-angle valve - Dimensions and interfaces for pneumatic actuator 真空技术 直角阀 尺寸和气动装置的接口 |
China National Standards Y |
English PDF |
GB/T 25753.2-2010 |
Vacuum technologY - Roots vacuum pump - Measurement of performance characteristics - Part 2: Measurement of compression ratio of the zero throughput 真空技术 罗茨真空泵性能测量方法 第2部分:零流量压缩比的测量 |
China National Standards Y |
English PDF |
GB/T 25753.1-2010 |
Vacuum technologY - Roots vacuum pump - Measurement of performance characteristics - Part 1: Measurement of maximum tolerable differential pressure 真空技术 罗茨真空泵性能测量方法 第1部分:最大允许压差的测量 |
China National Standards Y |
English PDF |
GB/T 25749.4-2010 |
SafetY of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system 机械安全 空气传播的有害物质排放的评估 第4部分:测量排气系统捕获效率的示踪法 |
China National Standards Y |
English PDF |
GB/T 25749.3-2010 |
SafetY of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant 机械安全 空气传播的有害物质排放的评估 第3部分:测量给定污染物排放率的试验台法 |
China National Standards Y |
English PDF |
GB/T 25749.2-2010 |
SafetY of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant 机械安全 空气传播的有害物质排放的评估 第2部分:测量给定污染物排放率的示踪气体法 |
China National Standards Y |
English PDF |
GB/T 25749.1-2010 |
SafetY of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods 机械安全 空气传播的有害物质排放的评估 第1部分:试验方法的选择 |
China National Standards Y |
English PDF |
GB/T 16709.2-2010 |
Vacuum technologY- Mounting dimensions of pipeline fittings Part 2: Knife-edge flange type 真空技术 管路配件的装配尺寸 第2部分:刀口法兰型 |
China National Standards Y |
English PDF |
GB/T 16709.1-2010 |
Vacuum technologY - Mounting dimensions of pipeline fittings - Part 1: Non knife-edge flange type 真空技术 管路配件的装配尺寸 第1部分:非刀口法兰型 |
China National Standards Y |
English PDF |
GB 14925-2010 |
LaboratorY animal - Requirements of environment and housing facilities 实验动物 环境及设施 |
China National Standards Y |
English PDF |
GB 14924.3-2010 |
LaboratorY animals - Nutrients for formula feeds 实验动物 配合饲料营养成分 |
China National Standards Y |
English PDF |
GB 14923-2010 |
LaboratorY animal - Genetic quality control of mammalian laboratory animals 实验动物 哺乳类实验动物的遗传质量控制 |
China National Standards Y |
English PDF |
GB/T 25955-2010 |
Scraps of tantalum and tantalum alloY 钽及钽合金废料 |
China National Standards Y |
English PDF |
GB/T 25954-2010 |
Scraps of cobalt and cobalt alloY 钴及钴合金废料 |
China National Standards Y |
English PDF |
GB/T 25951.3-2010 |
Nickel and nickel alloYs - Terms and definitions - Part 3: Wrought products and castings 镍及镍合金 术语和定义 第3部分:加工产品和铸件 |
China National Standards Y |
English PDF |
GB/T 25951.2-2010 |
Nickel and nickel alloYs - Terms and definitions - Part 2: Refinery products 镍及镍合金 术语和定义 第2部分:精炼产品 |
China National Standards Y |
English PDF |
GB/T 25951.1-2010 |
Nickel and nickel alloYs - Terms and definitions - Part 1: Materials 镍及镍合金 术语和定义 第1部分:材料 |
China National Standards Y |
English PDF |
GB/T 25950-2010 |
Aluminium ores - Experimental determination of the heterogeneitY of constitution 铝土矿 成分不均匀性的实验测定 |
China National Standards Y |
English PDF |
GB/T 25944-2010 |
Aluminium ores - Experimental determination of the heterogeneitY of distribution of a lot 铝土矿 批中不均匀性的实验测定 |
China National Standards Y |
English PDF |
GB/T 25934.3-2010 |
Methods for chemical analYsis of high - purity gold - Part 3: Ethylether extraction separation - Inductively coupled plasma-atomic emission spectrometry - Determinaion of impurity elements contents 高纯金化学分析方法 第3部分:乙醚萃取分离ICP-AES法 测定杂质元素的含量 |
China National Standards Y |
English PDF |
GB/T 25934.2-2010 |
Methods for chemical analYsis of high purity gold - Part 2: Inductively coupled plasma mass spectrometry standard enter emendation-inner standard method - Determination of impurity elements contents 高纯金化学分析方法 第2部分:ICP-MS-标准加入校正-内标法 测定杂质元素的含量 |
China National Standards Y |
English PDF |
GB/T 25934.1-2010 |
Methods for chemical analYsis of high purity gold - Part 1: Ethyl acetate extraction separation - Inductively coupled plasma - atomic emission spectrometry - Determination of impurity elements contents 高纯金化学分析方法 第1部分:乙酸乙脂萃取分离ICP-AES法 测定杂质元素的含量 |
China National Standards Y |
English PDF |
GB/T 25933-2010 |
High-puritY gold 高纯金 |
China National Standards Y |
English PDF |
GB/T 25932-2010 |
General specification of superalloY master alloys for castings 铸造高温合金母合金通用技术条件 |
China National Standards Y |
English PDF |
GB/T 25835-2010 |
EpoxY-coated steel wires for cables 缆索用环氧涂层钢丝 |
China National Standards Y |
English PDF |
GB/T 25834-2010 |
Corrosion of metals and alloYs - Accelerate corrosion testing of iron and steel in outdoor atmospheres 金属和合金的腐蚀 钢铁户外大气加速腐蚀试验 |
China National Standards Y |
English PDF |
GB/T 25833-2010 |
The galvanized steel wire ropes for highwaY guardrail 公路护栏用镀锌钢丝绳 |
China National Standards Y |
English PDF |
GB/T 25831-2010 |
General specification of superalloY wires 高温合金丝材通用技术条件 |
China National Standards Y |
English PDF |
GB/T 25830-2010 |
General specification of superalloY disks and rings 高温合金盘(环)件通用技术条件 |
China National Standards Y |
English PDF |
GB/T 25829-2010 |
Permissisible variations for chemical composition of superalloY products 高温合金成品化学成分允许偏差 |
China National Standards Y |
English PDF |
GB/T 25828-2010 |
General specification of superalloY bars 高温合金棒材通用技术条件 |
China National Standards Y |
English PDF |
GB/T 25827-2010 |
General specification of superalloY plates and strips 高温合金板(带)材通用技术条件 |
China National Standards Y |
English PDF |
GB/T 25826-2010 |
EpoxY-coated steel for the reinforcement of concrete 钢筋混凝土用环氧涂层钢筋 |
China National Standards Y |
English PDF |
GB/T 25823-2010 |
Individual epoxY-coated wire prestressing steel strand 单丝涂覆环氧涂层预应力钢绞线 |
China National Standards Y |
English PDF |
GB/T 14999.7-2010 |
Test methods for grain sizes,primarY dendrite spacing and microshrinkage of superalloy castings 高温合金铸件晶粒度、一次枝晶间距和显微疏松测定方法 |
China National Standards Y |
English PDF |
GB/T 14999.6-2010 |
Test methods for characterizing duplex grain sizes and primarY carbides distribution of superalloy forgings 锻制高温合金双重晶粒组织和一次碳化物分布测定方法 |
China National Standards Y |
English PDF |
GB/T 1482-2010 |
Metallic powders - Determination of flow time bY means of a calibrated funnel (Hall flowmeter) 金属粉末 流动性的测定 标准漏斗法(霍尔流速计) |
China National Standards Y |
English PDF |
GB/T 14260-2010 |
General rules for sampling and sample preparation of heavY nonferrous metals flotation concentrates in bulk 散装重有色金属浮选精矿取样、制样通则 |
China National Standards Y |
English PDF |
GB/T 6335.2-2010 |
RotarY and rotary impact masonry drill bits with hardmetal tips Part 2: Technical specifications 旋转和旋转冲击式硬质合金建工钻 第2部分:技术条件 |
China National Standards Y |
English PDF |
GB/T 6335.1-2010 |
RotarY and rotary impact masonry drill bits with hardmetal tips Part1: Dimensions 旋转和旋转冲击式硬质合金建工钻 第1部分:尺寸 |
China National Standards Y |
English PDF |
GB/T 6080.1-2010 |
Machine hacksaw blades - Part 1: TYpes and dimensions 机用锯条 第1部分:型式和尺寸 |
China National Standards Y |
English PDF |
GB/T 25939-2010 |
Up-stream equipment sYstem for rubber internal mixer 密闭式炼胶机上辅机系统 |
China National Standards Y |
English PDF |
GB/T 25938-2010 |
Automatic weighing sYstem for small chemicals in rubber mixing process 炼胶工序中小料自动配料称量系统 |
China National Standards Y |
English PDF |
GB/T 25937-2010 |
Radial plY tyre single stage building machine 子午线轮胎一次法成型机 |
China National Standards Y |
English PDF |
GB/T 25720-2010 |
Pneumatic forging hammer - TYpe and parameter 空气锤 型式与基本参数 |
China National Standards Y |
English PDF |
GB/T 25719-2010 |
Electro hYdraulic forging hammer - Technical requirements 电液锤 技术条件 |
China National Standards Y |
English PDF |
GB/T 25718-2010 |
Electro hYdraulic forging hammer - Type and basic parameter 电液锤 型式与基本参数 |
China National Standards Y |
English PDF |
GB/T 25717-2010 |
Hot chamber die casting machines for magnesium alloYs 镁合金热室压铸机 |
China National Standards Y |
English PDF |
GB/T 25716-2010 |
cold chamber die casting machines for magnesium alloYs 镁合金冷室压铸机 |
China National Standards Y |
English PDF |
GB/T 25714.1-2010 |
Molten iron ladle - Part 2: TYpes and basic parameters 铁液浇包 第1部分:型式与基本参数 |
China National Standards Y |
English PDF |
GB/T 25713-2010 |
MachinerY vibrating stress relief device 机械式振动时效装置 |
China National Standards Y |
English PDF |
GB/T 25712-2010 |
VibratorY stress relief technology - Parameter selection and effect evaluation methods 振动时效工艺参数选择及效果评定方法 |
China National Standards Y |
English PDF |
GB/T 25711-2010 |
FoundrY machinery - General technical requirements 铸造机械 通用技术条件 |
China National Standards Y |
English PDF |
GB/T 25710-2010 |
Walking auxiliarY devices in mine inclined laneway 矿用斜巷行人助行装置 |
China National Standards Y |
English PDF |
GB/T 25707-2010 |
HYdraulic defence explosion mine hoists and mine winders 液压防爆提升机和提升绞车 |
China National Standards Y |
English PDF |
GB/T 25706-2010 |
Code of designations for mining machinerY products 矿山机械产品型号编制方法 |
China National Standards Y |
English PDF |
GB/T 25703-2010 |
Overflow ball mill - EnergY consumption index 溢流型球磨机 能耗指标 |
China National Standards Y |
English PDF |
GB/T 25700-2010 |
Single toggle jaw crusher - EnergY consumption index 复摆颚式破碎机 能耗指标 |
China National Standards Y |
English PDF |
GB/T 25699-2010 |
Belt crossflow pellet feed drYer 带式横流颗粒饲料干燥机 |
China National Standards Y |
English PDF |
GB/T 25698-2010 |
Feed processing technologY terms 饲料加工工艺术语 |
China National Standards Y |
English PDF |
GB/T 25696-2010 |
Road construction and road maintenance machinerY and equipment - Asphalt pavement heater - Terminology and commercial specifications 道路施工与养护机械设备 沥青路面加热机 术语和商业规格 |
China National Standards Y |
English PDF |
GB/T 25695-2010 |
Building construction machinerY and equipment - Borehole construction general regulations for rotary rig 建筑施工机械与设备 旋挖钻机成孔施工通用规程 |
China National Standards Y |
English PDF |
GB/T 25694-2010 |
Earth-moving machinerY - Skid-steer loaders 土方机械 滑移转向装载机 |
China National Standards Y |
English PDF |
GB/T 25693-2010 |
Earth-moving machinerY - remote - controlled demolition robot 土方机械 遥控拆除机 |
China National Standards Y |
English PDF |
GB/T 25692-2010 |
Earth-moving machinerY - Retarders for dumpers and tractor-scrapers - Performance tests 土方机械 自卸车和自行式铲运机用限速器 性能试验 |
China National Standards Y |
English PDF |
GB/T 25691-2010 |
Earth-moving machinerY - Open bowl scraper - Volumetric rating 土方机械 开斗式铲运机 容量标定 |
China National Standards Y |
English PDF |
GB/T 25690-2010 |
Earth-moving machinerY - Elevating scrapers - Volumetric ratings 土方机械 升运式铲运机 容量标定 |
China National Standards Y |
English PDF |
GB/T 25689-2010 |
Earth-moving machinerY - Dumper bodies - Volumetric rating 土方机械 自卸车车厢 容量标定 |
China National Standards Y |
English PDF |
GB/T 25688.2-2010 |
Earth-moving machinerY - Service tools - Part 2: Mechanical pullers and pushers 土方机械 维修工具 第2部分:机械式拉拔器和推拔器 |
China National Standards Y |
English PDF |
GB/T 25688.1-2010 |
Earth-moving machinerY - Service tools - Part 1: Common maintenance and adjustment tools 土方机械 维修工具 第1部分:通用维修和调整工具 |
China National Standards Y |
English PDF |
GB/T 25687.2-2010 |
Earth-moving machinerY - Multilingual listing of equivalent terms -Part 2: Performance and dimensions 土方机械 同义术语的多语种列表 第2部分:性能和尺寸 |
China National Standards Y |
English PDF |
GB/T 25687.1-2010 |
Earth-moving machinerY - Multilingual listing of equivalent terms - Part 1: General 土方机械 同义术语的多语种列表 第1部分:综合 |
China National Standards Y |
English PDF |
GB/T 25686-2010 |
Earth-moving machinerY - Safety requirements for remote operator control 土方机械 司机遥控的安全要求 |
China National Standards Y |
English PDF |
GB/T 25685.2-2010 |
Earth-moving machinerY - Field of vision of surveillance and rear-view mirrors - Part 2: Performance criteria 土方机械 监视镜和后视镜的视野 第2部分:性能准则 |
China National Standards Y |
English PDF |
GB/T 25685.1-2010 |
Earth-moving machinerY - Field of vision of surveillance and rear-view mirrors - Part 1: Test methods 土方机械 监视镜和后视镜的视野 第1部分:试验方法 |
China National Standards Y |
English PDF |
GB/T 25681-2010 |
Printing machinerY - Perfect binding machine 印刷机械 胶粘装订联动机 |
China National Standards Y |
English PDF |
GB/T 25680-2010 |
Printing machinerY - Bed-type platen-die cutting and creasing machine 印刷机械 卧式平压模切机 |
China National Standards Y |
English PDF |
GB/T 25679-2010 |
Printing machinerY - Web modular unit flexographic press 印刷机械 卷筒料机组式柔性版印刷机 |
China National Standards Y |
English PDF |
GB/T 25678-2010 |
Printing machinerY - Commercial web offset press 印刷机械 卷筒纸平版商业印刷机 |
China National Standards Y |
English PDF |
GB/T 25677-2010 |
Printing machinerY - Web offset 印刷机械 卷筒纸平版印刷机 |
China National Standards Y |
English PDF |
GB/T 25676.1-2010 |
Printing machinerY - Wide format ink-jet printer - Part 1: Roll media wide format ink-jet printer 印刷机械 宽幅面喷绘机 第1部分:卷材型宽幅面喷绘机 |
China National Standards Y |
English PDF |
GB/T 25675-2010 |
Printing machinerY - Technology conditions of resources utilization 印刷机械 资源利用技术条件 |
China National Standards Y |
English PDF |
GB/T 25669.2-2010 |
Tooling sYstem for NC boring and milling machine - Part 2: Dimensions 镗铣类数控机床用工具系统 第2部分:型式和尺寸 |
China National Standards Y |
English PDF |
GB/T 25669.1-2010 |
Tooling sYstem for NC boring and milling machine - Part 1:Designation 镗铣类数控机床用工具系统 第1部分:型号表示规则 |
China National Standards Y |
English PDF |
GB/T 25668.2-2010 |
Modular tooling sYstem for boring and milling Part2: TMG21 Tooling system - Dimensions 镗铣类模块式工具系统 第2部分:TMG21工具系统的型式和尺寸 |
China National Standards Y |
English PDF |
GB/T 25668.1-2010 |
Modular tooling sYstem for boring and milling Part 1: Designation 镗铣类模块式工具系统 第1部分:型号表示规则 |
China National Standards Y |
English PDF |
Find out:32308Items | To Page of: First -Previous-Next -Last | [192] [193] [194] [195] [196] [197] [198] |