GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 17506-2008 |
The analysIs method of corrosive layer on ferrous metals of ship with EPMA 船舶黑色金属腐蚀层的电子探针分析方法 |
China National Standards I |
English PDF |
GB/T 17360-2008 |
QuantItative analysis method of low content Si and Mn in steel with electron probe microanalysis 钢中低含量Si、Mn的电子探针定量分析方法 |
China National Standards I |
English PDF |
GB/T 15965-2008 |
Hand-made carpets - DetermInation of length of Pile 手工地毯 绒头长度的测定方法 |
China National Standards I |
English PDF |
GB/T 15964-2008 |
Carpets - DetermInation of number of tufts or loops per unit lenght and per unit area 地毯 单位长度和单位面积绒簇或绒圈数目的测定方法 |
China National Standards I |
English PDF |
GB/T 15074-2008 |
General guIde of quantitative analysis by EPMA 电子探针定量分析方法通则 |
China National Standards I |
English PDF |
GB/T 14522-2008 |
ArtIficial weathering test method for plastics,coating and rubber materials used for machinery industrial products - Fluorescent UV lamps 机械工业产品用塑料、涂料、橡胶材料人工气候老化试验方法 荧光紫外灯 |
China National Standards I |
English PDF |
GB/T 11049-2008 |
BurnIng behaviour of carpets - Tablet test at ambient temperature 地毯燃烧性能 室温片剂试验方法 |
China National Standards I |
English PDF |
GB 4706.9-2008 |
Household and sImilar electrical appliances - Safety - Particular requirements for shavers,hair clippers and similar appliances 家用和类似用途电器的安全 剃须刀、电推剪及类似器具的特殊要求 |
China National Standards I |
English PDF |
GB 4706.89-2008 |
Safety of household and sImilar electrical appliances - Particular requirements for high pressure cleaners and steam cleaners, for industrial and commercial use 家用和类似用途电器的安全 工业和商用高压清洁器与蒸汽清洁器的特殊要求 |
China National Standards I |
English PDF |
GB 4706.88-2008 |
Safety of household and sImilar electrical appliances - Particular requirements for wet and dry vacuum cleaners,including power brush,for industrial and commercial use 家用和类似用途电器的安全 工业和商用带动力刷的湿或干吸尘器的特殊要求 |
China National Standards I |
English PDF |
GB 4706.87-2008 |
Safety of household and sImilar electrical appliances - Particular requirements for spray extraction appliances,for industrial and commercial use 家用和类似用途电器的安全 工业和商用喷雾抽吸器具的特殊要求 |
China National Standards I |
English PDF |
GB 4706.86-2008 |
Safety of household and sImilar electrical appliances - Particular requirements for floor treatment and floor cleaning machines,for industrial and commercial use 家用和类似用途电器的安全 工业和商用地板处理机与地面清洗机的特殊要求 |
China National Standards I |
English PDF |
GB 21966-2008 |
Safety of prImary and secondary lithium cells and batteries during transport 锂原电池和蓄电池在运输中的安全要求 |
China National Standards I |
English PDF |
GB 16844-2008 |
Self-ballasted lamps for general lIghting services - Safety requirements 普通照明用自镇流灯的安全要求 |
China National Standards I |
English PDF |
GB 16843-2008 |
SIngle-capped fluorescent lamps - Safety specifications 单端荧光灯的安全要求 |
China National Standards I |
English PDF |
GB 14196.3-2008 |
Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) 白炽灯 安全要求 第3部分:卤钨灯(非机动车辆用) |
China National Standards I |
English PDF |
GB/T 9651-2008 |
Test procedures for sIngle-phase induction motor 单相异步电动机试验方法 |
China National Standards I |
English PDF |
GB/T 8128-2008 |
Test procedures for sIngle-phase series motors 单相串励电动机试验方法 |
China National Standards I |
English PDF |
GB/T 7095.7-2008 |
Enamelled rectangular copper wInding wires - Part 7:Polyester enamelled rectangular copper wire, class 130 漆包铜扁绕组线 第7部分:130级聚酯漆包铜扁线 |
China National Standards I |
English PDF |
GB/T 7095.6-2008 |
Enamelled rectangular copper wInding wires - Part 6: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 漆包铜扁绕组线 第6部分:200级聚酯或聚酯亚胺/聚酰胺酰亚胺复合漆包铜扁线 |
China National Standards I |
English PDF |
GB/T 7095.5-2008 |
Enamelled rectangular copper wInding wires - Part 5:Aromatic polyimide enamelled rectangular copper wire, class 240 漆包铜扁绕组线 第5部分:240级芳族聚酰亚胺漆包铜扁线 |
China National Standards I |
English PDF |
GB/T 7095.4-2008 |
Enamelled rectangular copper wInding wires - Part 4:Polyesterimide enamelled rectangular copper wire, class 180 漆包铜扁绕组线 第4部分:180级聚酯亚胺漆包铜扁线 |
China National Standards I |
English PDF |
GB/T 7095.3-2008 |
Enamelled rectangular copper wInding wires - Part 3:Polyester enamelled rectangular copper wire, class 155 漆包铜扁绕组线 第3部分:155级聚酯漆包铜扁线 |
China National Standards I |
English PDF |
GB/T 7095.2-2008 |
Enamelled rectangular copper wInding wires - Part 2:Polyvinyl acetal enamelled rectangular copper wire,class 120 漆包铜扁绕组线 第2部分:120级缩醛漆包铜扁线 |
China National Standards I |
English PDF |
GB/T 7095.1-2008 |
Enamelled rectangular copper wInding wires - Part 1:General requirements 漆包铜扁绕组线 第1部分:一般规定 |
China National Standards I |
English PDF |
GB/T 4997-2008 |
General specIfication for permanent magnet low speed direct current tachogenerator 永磁式低速直流测速发电机通用技术条件 |
China National Standards I |
English PDF |
GB/T 4712-2008 |
AutomatIc diesel generating set,requirements of classification for 自动化柴油发电机组分级要求 |
China National Standards I |
English PDF |
GB/T 21975-2008 |
Method of test for relIability of three-phase induction motors for crane and metallurgical application 起重及冶金用三相异步电动机可靠性试验方法 |
China National Standards I |
English PDF |
GB/T 21974-2008 |
TechnIcal specification for YZRW range of eddy-current braking wound-rotor three-phase induction motors for crane and metallurgical application YZRW系列起重及冶金用涡流制动绕线转子三相异步电动机技术条件 |
China National Standards I |
English PDF |
GB/T 21973-2008 |
TechnIcal specification for YZR3 range of wound-rotor three-phase induction motors for crane & metallurgical applications YZR3系列起重及冶金用绕线转子三相异步电动机技术条件 |
China National Standards I |
English PDF |
GB/T 21972.1-2008 |
TechnIcal specification for variable-frequency adjustable-speed three-phase induction motors for crane and metallurgical application - Part 1:YZP series variable-frequency adjustable-speed three-phase induction motors for crane and metallurgical applicati 起重及冶金用变频调速三相异步电动机技术条件 第1部分:YZP系列起重及冶金用变频调速三相异步电动机 |
China National Standards I |
English PDF |
GB/T 21971-2008 |
TechnIcal specification for YZD range of multi-speed three-phase induction motors for crane application YZD系列起重用多速三相异步电动机技术条件 |
China National Standards I |
English PDF |
GB/T 21969-2008 |
TechnIcal specification for YGP series variable-frequency adjustable-speed shree-phase induction motors for roll table application YGP系列辊道用变频调速三相异步电动机技术条件 |
China National Standards I |
English PDF |
GB/T 21968-2008 |
TechnIcal specification for YBZS range of flame-proof double-speed three-phase induction motors for crane application YBZS系列起重用隔爆型双速三相异步电动机技术条件 |
China National Standards I |
English PDF |
GB/T 21967-2008 |
YBZE、YBZSE Range three-phase Induction motors for crane application flameproof electromagnetic braking technical specifications YBZE、YBZSE系列起重用隔爆型电磁制动三相异步电动机技术条件 |
China National Standards I |
English PDF |
GB/T 14819-2008 |
General specIfication for wound field DC servomotors 电磁式直流伺服电动机通用技术条件 |
China National Standards I |
English PDF |
GB/T 14818-2008 |
General specIfication for DC servomotors with wounded disc armature 线绕盘式直流伺服电动机通用技术条件 |
China National Standards I |
English PDF |
GB/T 14817-2008 |
General specIfication for permanent magnet DC servomotors 永磁式直流伺服电动机通用技术条件 |
China National Standards I |
English PDF |
GB/T 13958-2008 |
Test procedures for non-dIrect current excitation winding synchronous motor 无直流励磁绕组同步电动机试验方法 |
China National Standards I |
English PDF |
GB/T 13281-2008 |
Lead-AcId battery used for passenger trains 铁路客车用铅酸蓄电池 |
China National Standards I |
English PDF |
GB/T 13139-2008 |
General specIfication for hysteresis synchronous motors 磁滞同步电动机通用技术条件 |
China National Standards I |
English PDF |
GB/T 12665-2008 |
RequIrements of damp-heat testing of electrical machine for service in general environmental condition 电机在一般环境条件下使用的湿热试验要求 |
China National Standards I |
English PDF |
GB/T 12351-2008 |
EnvIronmental technical requirements of rotating electric machines for tropical use 热带型旋转电机环境技术要求 |
China National Standards I |
English PDF |
GB/T 10401-2008 |
Permanent magnet dIrect current torque motors,General specification for 永磁式直流力矩电动机通用技术条件 |
China National Standards I |
English PDF |
GB 16006-2008 |
CrIteria for elimination of iodine deficiency disorders 碘缺乏病消除标准 |
China National Standards I |
English PDF |
GB/T 21970-2008 |
Water qualIty - Determiniation of putrescine,cadaverine, spermidine,spermine and histamine - High performance liquid chromatography method 水质 组胺等五种生物胺的测定 高效液相色谱法 |
China National Standards I |
English PDF |
GB/T 8169-2008 |
TestIng method of vibration transmissibility for packaging cushioning materials 包装用缓冲材料振动传递特性试验方法 |
China National Standards I |
English PDF |
GB/T 8168-2008 |
TestIng method of static compression for packaging cushioning materials 包装用缓冲材料静态压缩试验方法 |
China National Standards I |
English PDF |
GB/T 8097-2008 |
EquIpment for harvesting - Combine harvesters - Test procedure 收获机械 联合收割机 试验方法 |
China National Standards I |
English PDF |
GB/T 6490-2008 |
Water-turbIne pump 水轮泵 |
China National Standards I |
English PDF |
GB/T 21964-2008 |
RepaIr of agricultural machines - Safety regulations 农业机械修理 安全规范 |
China National Standards I |
English PDF |
GB/T 21963-2008 |
AgrIcultural machinery maintenance and repair terms 农业机械维修术语 |
China National Standards I |
English PDF |
GB/T 21962-2008 |
TechnIcal requirements for maize combine harvester 玉米收获机械 技术条件 |
China National Standards I |
English PDF |
GB/T 21961-2008 |
Test methods for maIze combine harvester 玉米收获机械 试验方法 |
China National Standards I |
English PDF |
GB/T 16958-2008 |
BIaxially oriented polyester film for package 包装用双向拉伸聚酯薄膜 |
China National Standards I |
English PDF |
GB/T 14248-2008 |
DetermInation of braking performance for harvesting machinery 收获机械 制动性能测定方法 |
China National Standards I |
English PDF |
GB/T 8005.3-2008 |
AlumInium of aluminium alloys-Terms and difinitions - Part 3:Surface treatment terms 铝及铝合金术语 第3部分:表面处理 |
China National Standards I |
English PDF |
GB/T 8005.1-2008 |
AlumInium and aluminium alloys-Terms and definitions - Part 1:product and method of processing and treatment 铝及铝合金术语 第1部分:产品及加工处理工艺 |
China National Standards I |
English PDF |
GB/T 6611-2008 |
TermInology and metallographs for titanium and titanium alloys 钛及钛合金术语和金相图谱 |
China National Standards I |
English PDF |
GB/T 5168-2008 |
MIcrostructure and macrostructure examination for α-β titanium alloys α-β钛合金高低倍组织检验方法 |
China National Standards I |
English PDF |
GB/T 470-2008 |
ZInc ingots 锌锭 |
China National Standards I |
English PDF |
GB/T 4324.8-2008 |
Methods for chemIcal analysis of tungsten - Determination of nickel content - The inductively coupled plasma atomic emission spectrometry 、 flame atomic absorption spectrometry and dimethylglyoxime gravimetry 钨化学分析方法 镍量的测定 电感耦合等离子体原子发射光谱法、火焰原子吸收光谱法和丁二酮肟重量法 |
China National Standards I |
English PDF |
GB/T 4324.15-2008 |
Methods for chemIcal analysis of tungsten - Determination of magnesium content - The flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry 钨化学分析方法 镁量的测定 火焰原子吸收光谱法和电感耦合等离子体原子发射光谱法 |
China National Standards I |
English PDF |
GB/T 4324.13-2008 |
Methods for chemIcal analysis of tungsten - Determination of calcium content - The inductively coupled plasma atomic emission spectrometry 钨化学分析方法 钙量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards I |
English PDF |
GB/T 3651-2008 |
MeasurIng method for thermal conductivity of metal at high temperature 金属高温导热系数测量方法 |
China National Standards I |
English PDF |
GB/T 3612-2008 |
Cemented carbIde blanks for gauge blocks or measuring tools 量规、量具用硬质合金毛坯 |
China National Standards I |
English PDF |
GB/T 2967-2008 |
Cast tungsten carbIde powder 铸造碳化钨粉 |
China National Standards I |
English PDF |
GB/T 2527-2008 |
Cemented carbIde inserts for mining and oil-field bits 矿山、油田钻头用硬质合金齿 |
China National Standards I |
English PDF |
GB/T 21994.8-2008 |
ChemIcal analysis of magnesium fluoride - Part 8: Determination of sulphate content - Barium sulphate gravimetric method 氟化镁化学分析方法 第8部分:硫酸根含量的测定 硫酸钡重量法 |
China National Standards I |
English PDF |
GB/T 21994.7-2008 |
ChemIcal analysis of magnesium fluoride - Part 7: Determination of iron content - Orthophenantholine photometric method 氟化镁化学分析方法 第7部分:三氧化二铁含量的测定 邻二氮杂菲分光光度法 |
China National Standards I |
English PDF |
GB/T 21994.6-2008 |
ChemIcal analysis of magnesium fluoride - Part 6: Determination of silica content - Molybdenum blue photometric method 氟化镁化学分析方法 第6部分:二氧化硅含量的测定 钼蓝分光光度法 |
China National Standards I |
English PDF |
GB/T 21994.5-2008 |
ChemIcal analysis of magnesium fluoride - Part 5: Determiantion of calcium content - Method of flame atomic absorption spectrometry 氟化镁化学分析方法 第5部分:钙含量的测定 火焰原子吸收光谱法 |
China National Standards I |
English PDF |
GB/T 21994.4-2008 |
ChemIcal analysis of magnesium fluoride - Part 4: Determination of magnesium - EDTA volumetric method 氟化镁化学分析方法 第4部分:镁含量的测定 EDTA容量法 |
China National Standards I |
English PDF |
GB/T 21994.3-2008 |
ChemIcal analysis of magnesium fluoride - Part 3: Determination of fluoride content - Distillation-thorium nitrate titration volumetric method 氟化镁化学分析方法 第3部分:氟含量的测定 蒸馏-硝酸钍容量法 |
China National Standards I |
English PDF |
GB/T 21994.2-2008 |
ChemIcal analysis of magnesium fluoride - Part 2: Determination of moisture content - Gravimetric method 氟化镁化学分析方法 第2部分:湿存水含量的测定 重量法 |
China National Standards I |
English PDF |
GB/T 21994.1-2008 |
ChemIcal analysis of magnesium fluoride - Part 1: Preparation and storage of test samples 氟化镁化学分析方法 第1部分:试样的制备和贮存 |
China National Standards I |
English PDF |
GB/T 20975.25-2008 |
Methods for chemIcal analysis of aluminium and aluminium alloys - Part 25:Inductively coupled plasma atomic emission spectrometric method 铝及铝合金化学分析方法 第25部分:电感耦合等离子体原子发射光谱法 |
China National Standards I |
English PDF |
GB/T 20255.6-2008 |
Methods for chemIcal analysis of hardmetals - Flame atomic absorption spectrometry - General requirements 硬质合金化学分析方法 火焰原子吸收光谱法 一般要求 |
China National Standards I |
English PDF |
GB/T 18376.1-2008 |
Grades of cemented carbIde - Part 1:Grades of cemented carbide for cutting tools 硬质合金牌号 第1部分:切削工具用硬质合金牌号 |
China National Standards I |
English PDF |
GB/T 12967.6-2008 |
Test Methods for anodIc oxidation coatings of aluminium and aluminium alloys - Part 6:Determination of color differences and appearance of colored anodic oxide films by viewing method 铝及铝合金阳极氧化膜检测方法 第6部分:目视观察法检验着色阳极氧化膜色差和外观质量 |
China National Standards I |
English PDF |
GB/T 12967.3-2008 |
Test Methods for anodIc oxidation coatings of aluminium and aluminium alloys - Part 3 : Copper accelerated acetic acid salt spray test(CASS test) 铝及铝合金阳极氧化膜检测方法 第3部分:铜加速乙酸盐雾试验(CASS试验) |
China National Standards I |
English PDF |
GB/T 12967.2-2008 |
Test Methods for anodIc oxidation coatings of aluminium and aluminium alloys - Part 2: measurement of wear risistance and wear index of anodic oxidation coatings with an abrasive wheel wear test appaeratus 铝及铝合金阳极氧化膜检测方法 第2部分:用轮式磨损试验仪测定阳极氧化膜的耐磨性和耐磨系数 |
China National Standards I |
English PDF |
GB/T 12967.1-2008 |
Test Methods for anodIc oxidation coatings of aluminium and aluminium alloys - Part 1:Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test Apparatus 铝及铝合金阳极氧化膜检测方法 第1部分:用喷磨试验仪测定阳极氧化膜的平均耐磨性 |
China National Standards I |
English PDF |
GB/T 1196-2008 |
Unalloyed alumInium ingots for remelting 重熔用铝锭 |
China National Standards I |
English PDF |
GB/T 11102-2008 |
Cemented carbIde products for geological exploration drilling tools 地质勘探工具用硬质合金制品 |
China National Standards I |
English PDF |
GB/T 11066.5-2008 |
Methods for chemIcal analysis of gold - Determination of silver,copper,iron,lead,antimony and bismuth contents - Atomic emission spectrometry 金化学分析方法 银、铜、铁、铅、锑和铋量的测定 原子发射光谱法 |
China National Standards I |
English PDF |
GB/T 11066.4-2008 |
Methods for chemIcal analysis of gold - Determination of copper, lead and bismuth contents - Flame atomic absorption spectrometry 金化学分析方法 铜、铅和铋量的测定 火焰原子吸收光谱法 |
China National Standards I |
English PDF |
GB/T 11066.3-2008 |
Methods for chemIcal analysis of gold - Determination of iron content - Flame atomic absorption spectrometry 金化学分析方法 铁量的测定 火焰原子吸收光谱法 |
China National Standards I |
English PDF |
GB/T 11066.2-2008 |
Methods for chemIcal analysis of gold - Determination of silver content - Flame atomic absorption spectrometry 金化学分析方法 银量的测定 火焰原子吸收光谱法 |
China National Standards I |
English PDF |
GB/T 11066.1-2008 |
Methods for chemIcal analysis of gold - Determination of gold content - Fire assaying method 金化学分析方法 金量的测定 火试金法 |
China National Standards I |
English PDF |
GB/T 9453-2008 |
TermInology for forging dies 锻模术语 |
China National Standards I |
English PDF |
GB/T 6110-2008 |
CarbIde dies for drawing - Types and dimensions 硬质合金拉制模 型式和尺寸 |
China National Standards I |
English PDF |
GB/T 15824-2008 |
Thermal fatIgue testing method for hot die steel 热作模具钢热疲劳试验方法 |
China National Standards I |
English PDF |
GB/T 15032-2008 |
General requIrements for rope laying machinery 制绳机械设备通用技术条件 |
China National Standards I |
English PDF |
GB/T 11880-2008 |
SpecIfication of large die-blocks used for die-forging hammer and mechanical forging press 模锻锤和大型机械锻压机用模块技术条件 |
China National Standards I |
English PDF |
GB/T 18207.1-2008 |
TermInology of protecting against and mitigating earthquake disasters - Part 1:Basic terms 防震减灾术语 第1部分:基本术语 |
China National Standards I |
English PDF |
GB/T 21929-2008 |
Test method for flash poInt by tag closed cup tester 泰格闭口杯闪点测定法 |
China National Standards I |
English PDF |
GB/T 21982-2008 |
DetermInation of residues of zearalanol, β-zearalanol, α-zearalenol, β-zearalenol, zearalanone and zearalenone in foodstuffs of animal origin - LC-MS/MS method 动物源食品中玉米赤霉醇、β-玉米赤霉醇、α-玉米赤霉烯醇、β-玉米赤霉烯醇、玉米赤霉酮和玉米赤霉烯酮残留量检测方法 液相色谱-质谱/质谱法 |
China National Standards I |
English PDF |
GB/T 21981-2008 |
DetermInation of hormone multiresidues in foodstuffs of animal origin - LC-MS/MS method 动物源食品中激素多残留检测方法 液相色谱-质谱/质谱法 |
China National Standards I |
English PDF |
GB 5135.15-2008 |
AutomatIc sprinkler system - Part 15: Domestic sprinklers 自动喷水灭火系统 第15部分:家用喷头 |
China National Standards I |
English PDF |
Find out:54769Items | To Page of: First -Previous-Next -Last | [405] [406] [407] [408] [409] [410] [411] |