GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 43626-2023 |
Safety regulations for semi-integrated LED lamps with power supply voltage not greater than AC rms 50V or ripple-free DC 120V for general lighting 普通照明用电源电压不大于交流有效值50V或无纹波直流120V的半集成式LED灯 安全规范 |
China National Standards with |
English PDF |
GB/T 43501-2023 |
Ships and Offshore Technology - Vibration measurement, evaluation and reporting guidelines for habitability of ships with specific characteristics 船舶和海上技术 特定特征船舶适居性的振动测量、评价和报告准则 |
China National Standards with |
English PDF |
GB/T 31728-2023 |
Movable light fixture with charging device 带充电装置的可移式灯具 |
China National Standards with |
English PDF |
GB/T 19510.211-2023 |
Light source control devices Part 2-11: Special requirements for miscellaneous electronic circuits used in conjunction with luminaires 光源控制装置 第2-11部分:与灯具联用的杂类电子线路的特殊要求 |
China National Standards with |
English PDF |
GB/T 17359-2023 |
Microbeam analysis Quantitative analysis of elements with atomic number not less than 11 by energy spectrometry 微束分析 原子序数不小于11的元素能谱法定量分析 |
China National Standards with |
English PDF |
GB/T 9364.8-2023 |
Miniature fuses Part 8: Fusing resistors with special overcurrent protection 小型熔断器 第8部分:带有特殊过电流保护的熔断电阻器 |
China National Standards with |
English PDF |
GB/Z 43468.1-2023 |
Assistive technology systems and assistive devices for persons with disabilities - Wheelchair fastening and occupant restraint systems - Part 1: General requirements and test methods 残障人辅助技术系统和辅助器具 轮椅车系固和乘坐者约束系统 第1部分:一般要求和试验方法 |
China National Standards with |
English PDF |
GB/T 7000.223-2023 |
Luminaires Part 2-23: Special requirements Extra-low voltage (ELV) lighting systems for use with extra-low voltage (ELV) light sources 灯具 第2-23部分:特殊要求 特低电压(ELV)光源用特低电压照明系统 |
China National Standards with |
English PDF |
GB 24542-2023 |
Fall protection Self-locking device with rigid guide rails 坠落防护 带刚性导轨的自锁器 |
China National Standards with |
English PDF |
GB/T 18329.2-2023 |
Sliding bearings Multi-layer metal sliding bearings Part 2: Destructive testing of bonding strength for alloys with thickness ≥ 2 mm 滑动轴承 多层金属滑动轴承 第2部分:合金厚度≥2mm的结合强度破坏性试验 |
China National Standards with |
English PDF |
GB/T 18329.1-2023 |
Sliding bearings Multi-layer metal sliding bearings Part 1: Ultrasonic non-destructive testing of bond quality for alloys with thickness ≥0.5mm 滑动轴承 多层金属滑动轴承 第1部分:合金厚度≥0.5mm的结合质量超声无损检验 |
China National Standards with |
English PDF |
GB/T 43342-2023 |
Safety requirements for automatic controllers of household and similar electrical appliances with remote operation functions 带有远程操作功能的家用和类似用途电器自动控制器的安全要求 |
China National Standards with |
English PDF |
GB/T 13871.4-2023 |
Rotating shaft lip seals with elastomer sealing elements - Part 4: Performance test procedures 密封元件为弹性体材料的旋转轴唇形密封圈 第4部分:性能试验程序 |
China National Standards with |
English PDF |
GB/T 13871.3-2023 |
Lip seals for rotating shafts with elastomeric sealing elements - Part 3: Storage, handling and installation 密封元件为弹性体材料的旋转轴唇形密封圈 第3部分:贮存、搬运和安装 |
China National Standards with |
English PDF |
GB/T 43261-2023 |
Product acceptance plan combining zero acceptance sampling system with process control procedures 零接收数抽样系统与过程控制程序相结合的产品验收方案 |
China National Standards with |
English PDF |
GB/Z 40602.4-2023 |
Radio interference from antennas and receiving systems Part 4: Wireless receiving systems Electromagnetic compatibility test methods for electronic equipment with integrated wireless modules 天线及接收系统的无线电干扰 第4部分:无线接收系统 集成无线模块电子设备电磁兼容测试方法 |
China National Standards with |
English PDF |
GB/T 43080.3-2023 |
Ventilators Ventilator efficiency classes Part 3: Ventilators without maximum drive speed 通风机 通风机效率等级 第3部分:不含驱动装置最高转速时的通风机 |
China National Standards with |
English PDF |
GB/T 26949.21-2023 |
Industrial vehicle stability verification Part 21: Picking vehicles with operator position lifting height greater than 1 200 mm 工业车辆 稳定性验证 第21部分:操作者位置起升高度大于1 200 mm的拣选车 |
China National Standards with |
English PDF |
GB/T 22789.2-2023 |
Plastic products Rigid polyvinyl chloride sheets (sheets) Part 2: Classification, size and properties of sheets with thickness less than 1mm 塑料制品 硬质聚氯乙烯板(片)材 第2部分:厚度1mm以下片材的分类、尺寸和性能 |
China National Standards with |
English PDF |
GB/T 22789.1-2023 |
Plastic products Rigid polyvinyl chloride sheets (sheets) Part 1: Classification, dimensions and properties of sheets with a thickness of 1 mm and above 塑料制品 硬质聚氯乙烯板(片)材 第1部分:厚度1mm及以上板材的分类、尺寸和性能 |
China National Standards with |
English PDF |
GB/T 713.5-2023 |
Steel plates and strips for pressure equipment Part 5: High manganese steels with specified low temperature properties 承压设备用钢板和钢带 第5部分:规定低温性能的高锰钢 |
China National Standards with |
English PDF |
GB/T 713.4-2023 |
Steel plates and strips for pressure equipment Part 4: Nickel alloy steels with specified low temperature properties 承压设备用钢板和钢带 第4部分:规定低温性能的镍合金钢 |
China National Standards with |
English PDF |
GB/T 713.3-2023 |
Steel plates and strips for pressure equipment Part 3: Low alloy steels with specified low temperature properties 承压设备用钢板和钢带 第3部分:规定低温性能的低合金钢 |
China National Standards with |
English PDF |
GB/T 713.2-2023 |
Steel plates and strips for pressure equipment Part 2: Non-alloy and alloy steels with specified temperature properties 承压设备用钢板和钢带 第2部分:规定温度性能的非合金钢和合金钢 |
China National Standards with |
English PDF |
GB/T 25922-2023 |
Measurement of fluid flow in closed pipes Flow measurement using a vortex flowmeter installed in a circular cross-section pipe filled with fluid 封闭管道中流体流量的测量 用安装在充满流体的圆形截面管道中的涡街流量计测量流量 |
China National Standards with |
English PDF |
GB/T 17626.11-2023 |
Electromagnetic compatibility - Testing and measurement techniques - Part 11: Immunity tests for voltage dips, short interruptions and voltage changes for equipment with input current less than or equal to 16 A per phase 电磁兼容 试验和测量技术 第11部分:对每相输入电流小于或等于16 A设备的电压暂降、短时中断和电压变化抗扰度试验 |
China National Standards with |
English PDF |
GB/T 4798.4-2023 |
Classification of environmental conditions Classification of environmental parameter groups and their severity levels Part 4: Stationary use in places without weather protection 环境条件分类 环境参数组分类及其严酷程度分级 第4部分:无气候防护场所固定使用 |
China National Standards with |
English PDF |
GB/T 4798.3-2023 |
Classification of environmental conditions Classification of environmental parameter groups and their severity classification Part 3: Stationary use in places with weather protection 环境条件分类 环境参数组分类及其严酷程度分级 第3部分:有气候防护场所固定使用 |
China National Standards with |
English PDF |
GB/T 18916.7-2023 |
Quotas for water withdrawals - Part 7: Alcohol 取水定额 第7部分:酒精 |
China National Standards with |
English PDF |
GB/T 18916.6-2023 |
Quotas for water withdrawals - Part 6: Beer 取水定额 第6部分:啤酒 |
China National Standards with |
English PDF |
GB/T 42552.1-2023 |
Acoustics - Laboratory method for measuring impact sound improvement of cladding with small slab modules - Part 1: Heavy dense slabs 声学 小楼板模块测量覆面层撞击声改善量的实验室方法 第1部分:重质密实楼板 |
China National Standards with |
English PDF |
GB/T 18916.16-2023 |
Quotas for water withdrawal - Part 16: Electrolytic aluminum 取水定额 第16部分:电解铝 |
China National Standards with |
English PDF |
GB/T 18916.12-2023 |
Water withdrawal quotas - Part 12: Alumina 取水定额 第12部分:氧化铝 |
China National Standards with |
English PDF |
GB/T 42695-2023 |
Textiles - Quantitative chemical analysis - Mixtures of kapok with certain other fibers 纺织品 定量化学分析 木棉与某些其他纤维的混合物 |
China National Standards with |
English PDF |
GB/T 42769-2023 |
Prosthetics and orthotics Functional deficits Description of patients treated with orthotics, clinical goals of treatment, functional requirements of orthotics 假肢和矫形器 功能缺失 矫形器治疗的患者、临床治疗目标、矫形器功能要求的描述 |
China National Standards with |
English PDF |
GB/T 18604-2023 |
Measuring natural gas flow with a gas ultrasonic flowmeter 用气体超声流量计测量天然气流量 |
China National Standards with |
English PDF |
GB/T 42321-2023 |
Additional requirements for 3.6 kV to 40.5 kV pole-mounted metal-enclosed switchgear with internal arc category 具有内部电弧类别的3.6 kV~40.5 kV柱上安装金属封闭开关设备的附加要求 |
China National Standards with |
English PDF |
GB/T 17902.1-2023 |
Information technology - Security techniques - Digital signatures with appendices - Part 1: Overview 信息技术 安全技术 带附录的数字签名 第1部分:概述 |
China National Standards with |
English PDF |
GB/T 41734.4-2023 |
Radio frequency identification of animals - Part 4: Performance evaluation of radio frequency identification readers in accordance with GB/T 20563 and GB/T 22334 动物射频识别 第4部分:符合GB/T 20563和GB/T 22334的射频识别读写器性能评估 |
China National Standards with |
English PDF |
GB/T 16608.1-2023 |
Basic electromechanical relays for telecommunications with qualification - Part 1: General specification and blank detail specification 有质量评定的电信用基础机电继电器 第1部分:总规范与空白详细规范 |
China National Standards with |
English PDF |
GB/T 20111.6-2022 |
Electrical insulation systems - Thermal assessment procedures - Part 6: Multifactorial assessment with additional factors in diagnostic tests 电气绝缘系统 热评定规程 第6部分:在诊断试验中增加因子的多因子评定 |
China National Standards with |
English PDF |
GB/T 26949.8-2022 |
Industrial vehicles - Stability verification - Part 8: Additional stability tests for stacking operations with mast tilted forward and load lifted 工业车辆 稳定性验证 第8部分:在门架前倾和载荷起升条件下堆垛作业的附加稳定性试验 |
China National Standards with |
English PDF |
GB/T 26949.4-2022 |
Industrial vehicles—Verification of stability—Part 4: Pallet stackers, double-deck stackers and orderers with a lift height not greater than 1 200 mm at the operator's position 工业车辆 稳定性验证 第4部分:托盘堆垛车、双层堆垛车和操作者位置起升高度不大于1 200 mm的拣选车 |
China National Standards with |
English PDF |
GB/T 10827.3-2022 |
Industrial vehicles - Safety requirements and verification - Part 3: Additional requirements for vehicles with lifted operating platforms and vehicles specially designed to operate with lifted loads 工业车辆 安全要求和验证 第3部分:对带有起升操作台的车辆和专门设计为带起升载荷运行的车辆的附加要求 |
China National Standards with |
English PDF |
GB/T 1927.13-2022 |
Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 13: Determination of transverse grain compressive modulus of elasticity 无疵小试样木材物理力学性质试验方法 第13部分:横纹抗压弹性模量测定 |
China National Standards with |
English PDF |
GB/T 41564-2022 |
Textiles - Quantitative chemical analysis - Blends of aramid fibers with certain other fibers 纺织品 定量化学分析 芳香族聚酰胺纤维与某些其他纤维的混合物 |
China National Standards with |
English PDF |
GB/T 41606-2022 |
Barium titanate-based thermosensitive ceramics with high electric strength and low resistivity 钛酸钡基高抗电强度低电阻率热敏陶瓷 |
China National Standards with |
English PDF |
GB/T 41517-2022 |
Ships and offshore technology - Ventilation of cargo spaces of vehicles capable of traveling with internal combustion engines - Theoretical calculation of the total airflow demand 船舶和海上技术 可行驶内燃机车辆的货舱的通风 气流总需量的理论计算 |
China National Standards with |
English PDF |
GB/T 41656-2022 |
Road vehicles - Mechanical coupling of towing vehicles with rear-mounted towbar couplings to towbar trailers - Interchangeability 道路车辆 尾部安装牵引杆连接器的牵引车与牵引杆挂车间的机械连接 互换性 |
China National Standards with |
English PDF |
GB/T 41651-2022 |
Road vehicles - Mechanical coupling of towing vehicles with lower front mounted towbar connectors and center axle trailers - Interchangeability 道路车辆 前下部安装牵引杆连接器的牵引车和中置轴挂车间的机械连接 互换性 |
China National Standards with |
English PDF |
GB/T 16886.4-2022 |
Biological evaluation of medical devices - Part 4: selection of interaction test with blood 医疗器械生物学评价 第4部分:与血液相互作用试验选择 |
China National Standards with |
English PDF |
GB/T 21391-2022 |
Measuring natural gas flow with gas turbine flowmeter 用气体涡轮流量计测量天然气流量 |
China National Standards with |
English PDF |
GB/T 41503-2022 |
Preparation of refractory sprayed material test block with amorphous refractory pneumatic nozzle and mixed spray gun 不定形耐火材料 气动喷嘴混合型喷枪制备耐火喷射料试块 |
China National Standards with |
English PDF |
GB/T 24160-2022 |
Hoop-wrapped composite cylinders with steel liner for the on-board storage of compressed natural gas as a fuel for automotive vehicles 车用压缩天然气钢质内胆环向缠绕气瓶 |
China National Standards with |
English PDF |
GB/T 21355-2022 |
Non-destructive testing—Industrial computed radiography with storage phosphor imaging plates—Classification of systems 无损检测 基于存储磷光成像板的工业计算机射线照相检测 系统分类 |
China National Standards with |
English PDF |
GB/T 26642-2022 |
Non-destructive testing—Industrial computed radiography with storage phosphor imaging plates—General principles for testing of metallic materials using X-rays and gamma rays 无损检测 基于存储磷光成像板的工业计算机射线照相检测 金属材料X射线和伽玛射线检测总则 |
China National Standards with |
English PDF |
GB/T 41162-2022 |
Alloy steel castings with special physical properties 特殊物理性能合金钢铸件 |
China National Standards with |
English PDF |
GB/T 17737.8-2022 |
Coaxial communication cables—Part 8: Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric 同轴通信电缆 第8部分:聚四氟乙烯绝缘半柔电缆分规范 |
China National Standards with |
English PDF |
GB/T 17737.801-2022 |
Coaxial communication cables—Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric 同轴通信电缆 第8-1部分:聚四氟乙烯绝缘半柔电缆空白详细规范 |
China National Standards with |
English PDF |
GB/T 23586-2022 |
General rules for the quality of stewed meat products with sauce 酱卤肉制品质量通则 |
China National Standards with |
English PDF |
GB/T 16895.13-2022 |
Low-Voltage Electrical Installations Part 7-701: Requirements for Special Installations or Locations Locations with Tubs or Showers 低压电气装置 第7-701部分:特殊装置或场所的要求 装有浴盆或淋浴的场所 |
China National Standards with |
English PDF |
GB/T 42170-2022 |
Footwear - Test methods for hollow and solid heels with heels - Heel adhesion 鞋类 带跟面的空心和实心鞋跟试验方法 跟面结合力 |
China National Standards with |
English PDF |
GB/T 22264.8-2022 |
Mounted electrical measuring instruments with digital display - Part 8: Test methods 安装式数字显示电测量仪表 第8部分:试验方法 |
China National Standards with |
English PDF |
GB/T 22264.6-2022 |
Mounted electrical measuring instruments with digital display - Part 6: Particular requirements for insulation resistance meters 安装式数字显示电测量仪表 第6部分:绝缘电阻表的特殊要求 |
China National Standards with |
English PDF |
GB/T 22264.7-2022 |
Mounted electrical measuring instruments with digital display - Part 7: Particular requirements for multifunction instruments 安装式数字显示电测量仪表 第7部分:多功能仪表的特殊要求 |
China National Standards with |
English PDF |
GB/T 22264.5-2022 |
Installed electrical measuring instruments with digital display - Part 5: Particular requirements for phase meters and power factor meters 安装式数字显示电测量仪表 第5部分:相位表和功率因数表的特殊要求 |
China National Standards with |
English PDF |
GB/T 22264.4-2022 |
Mounted electrical measuring instruments with digital display - Part 4: Particular requirements for frequency meters 安装式数字显示电测量仪表 第4部分:频率表的特殊要求 |
China National Standards with |
English PDF |
GB/T 22264.3-2022 |
Mounted electrical measuring instruments with digital display - Part 3: Particular requirements for wattmeters and reactive wattmeters 安装式数字显示电测量仪表 第3部分:功率表和无功功率表的特殊要求 |
China National Standards with |
English PDF |
GB/T 22264.2-2022 |
Mounted electrical measuring instruments with digital display - Part 2: Particular requirements for ammeters and voltmeters 安装式数字显示电测量仪表 第2部分:电流表和电压表的特殊要求 |
China National Standards with |
English PDF |
GB/T 41950-2022 |
Metallic coatings Zinc and zinc alloy electroplating with hexavalent chromium-free treatment on steel 金属覆盖层 钢铁上经过无六价铬处理的锌和锌合金电镀层 |
China National Standards with |
English PDF |
GB/T 5568-2022 |
Rubber or plastics hoses and hose assemblies - Hydraulic impulse test without deflection 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验 |
China National Standards with |
English PDF |
GB/T 2910.4-2022 |
Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain protein fibers with certain other fibers (hypochlorite method) 纺织品 定量化学分析 第4部分:某些蛋白质纤维与某些其他纤维的混合物(次氯酸盐法) |
China National Standards with |
English PDF |
GB/T 42207.5-2022 |
Connectors for electronic equipment - Product requirements - Rectangular connectors - Part 5: Detail specification for snap lock rewirable power connectors with rated voltage DC 250 V and rated current 30 A 电子设备用连接器 产品要求 矩形连接器 第5部分:额定电压直流250 V额定电流30 A卡扣锁紧可重复接线电源连接器详细规范 |
China National Standards with |
English PDF |
GB/T 42098-2022 |
Thin Self-Locking Nuts with Lug Plates for Aerospace 航空航天用单耳托板薄自锁螺母 |
China National Standards with |
English PDF |
GB/T 42094-2022 |
Swimming self-locking nuts for aerospace with MJ thread double lug support plate with countersunk head socket 航空航天用带沉头窝的MJ螺纹双耳托板游动自锁螺母 |
China National Standards with |
English PDF |
GB/T 16857.9-2022 |
Geometric Product Specification (GPS) Coordinate Measuring System (CMS) Acceptance and Re-inspection Testing Part 9: Coordinate Measuring Machines Equipped with Multiple Probing Systems 产品几何技术规范(GPS) 坐标测量系统(CMS)的验收检测和复检检测 第9部分:配备多种探测系统的坐标测量机 |
China National Standards with |
English PDF |
GB/T 16857.7-2022 |
Product Geometric Specification (GPS) Coordinate Measuring System (CMS) Acceptance Test and Re-inspection Test Part 7: Coordinate Measuring Machine Equipped with Image Detection System 产品几何技术规范(GPS) 坐标测量系统(CMS)的验收检测和复检检测 第7部分:配置影像探测系统的坐标测量机 |
China National Standards with |
English PDF |
GB/T 16857.12-2022 |
Geometric product specification (GPS) Acceptance testing and re-inspection testing of coordinate measuring systems (CMS) Part 12: Coordinate measuring machines with articulated arms 产品几何技术规范(GPS) 坐标测量系统(CMS)的验收检测和复检检测 第12部分:关节臂式坐标测量机 |
China National Standards with |
English PDF |
GB/T 41940-2022 |
Rubber - Determination of Viscosity and Stress Relaxation with a Rotorless Closed Shear Rheometer 橡胶 用无转子密闭剪切流变仪测定黏度和应力松弛 |
China National Standards with |
English PDF |
GB/T 18916.61-2022 |
Water withdrawal quotas - Part 61: Lysine salts 取水定额 第61部分:赖氨酸盐 |
China National Standards with |
English PDF |
GB/T 41935-2022 |
Plastics - Artificial weathering with acid deposits 塑料 含酸性沉积的人工气候老化 |
China National Standards with |
English PDF |
GB/T 18916.3-2022 |
Quotas for water withdrawals Part 3: Petroleum refining 取水定额 第3部分:石油炼制 |
China National Standards with |
English PDF |
GB/T 18916.5-2022 |
Quotas for water withdrawals - Part 5: Paper products 取水定额 第5部分:造纸产品 |
China National Standards with |
English PDF |
GB/T 1927.21-2022 |
Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 21: Determination of nail holding force 无疵小试样木材物理力学性质试验方法 第21部分:握钉力测定 |
China National Standards with |
English PDF |
GB/T 41734.1-2022 |
Radio Frequency Identification of Animals Part 1: Consistency Assessment of Radio Frequency Identification Labels with GB/T 20563 and GB/T 22334 (Including the Issuance and Use of Manufacturer Codes) 动物射频识别 第1部分:射频识别标签与GB/T 20563和GB/T 22334的一致性评估(包括制造商代码的发放和使用) |
China National Standards with |
English PDF |
GB/T 12085.22-2022 |
Optics and photonics - Environmental test methods - Part 22: Combined test of low temperature, high temperature or temperature change with impact or random vibration 光学和光子学 环境试验方法 第22部分: 低温、高温或温度变化与碰撞或随机振动综合试验 |
China National Standards with |
English PDF |
GB/T 13871.1-2022 |
Rotary shaft lip seals with elastomeric sealing elements - Part 1: Dimensions and tolerances 密封元件为弹性体材料的旋转轴唇形密封圈 第1部分:尺寸和公差 |
China National Standards with |
English PDF |
GB/T 41736-2022 |
Aluminum Matrix Composites with High Volume Fraction Silicon Carbide Particles 高体积分数碳化硅颗粒铝基复合材料 |
China National Standards with |
English PDF |
GB/T 41860.2-2022 |
Forming molds - Retaining rings - Part 2: Retaining rings for small and medium molds with heat shields, types C and D 成型模 定位圈 第2部分:带隔热板的中小型模具定位圈 C型和D型 |
China National Standards with |
English PDF |
GB/T 41860.1-2022 |
Forming molds - Retaining rings - Part 1: Retaining rings for small and medium-sized molds without heat shields, types A and B 成型模 定位圈 第1部分:无隔热板的中小型模具定位圈 A型和B型 |
China National Standards with |
English PDF |
GB/T 18916.63-2022 |
Water withdrawal quotas - Part 63: Flat glass 取水定额 第63部分:平板玻璃 |
China National Standards with |
English PDF |
GB/T 18916.62-2022 |
Water withdrawal quotas - Part 62: Cement 取水定额 第62部分:水泥 |
China National Standards with |
English PDF |
GB/T 22359.2-2022 |
Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with built-in power supply - Part 2: Additional EMC requirements for functional safety 土方机械与建筑施工机械 内置电源机器的电磁兼容性(EMC) 第2部分:功能安全的EMC附加要求 |
China National Standards with |
English PDF |
GB/T 22359.1-2022 |
Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with built-in power supply - Part 1: General requirements for EMC under typical electromagnetic environmental conditions 土方机械与建筑施工机械 内置电源机器的电磁兼容性(EMC) 第1部分:典型电磁环境条件下的EMC一般要求 |
China National Standards with |
English PDF |
GB/T 41977-2022 |
Packaging Labeling and direct product marking with 1D and 2D barcodes 包装 一维条码和二维条码的标签和直接产品标记 |
China National Standards with |
English PDF |
GB/T 13871.6-2022 |
Rotary shaft lip seals with elastomeric sealing elements - Part 6: Specification for elastomeric materials 密封元件为弹性体材料的旋转轴唇形密封圈 第6部分:弹性体材料规范 |
China National Standards with |
English PDF |
GB/T 18931-2022 |
Classification of alkaline dense shaped refractory products with carbon content less than 7% 碳含量小于7%的碱性致密定形耐火制品分类 |
China National Standards with |
English PDF |
GB/T 25963-2022 |
Determination of aromatics content in middle distillates containing fatty acid methyl esters - High performance liquid chromatography with differential refractive index detector 含脂肪酸甲酯中间馏分芳烃含量的测定 示差折光检测器高效液相色谱法 |
China National Standards with |
English PDF |
GB/T 13789-2022 |
Method for Measuring Magnetic Properties of Electrical Steel Strip (Sheet) with Single Chip Tester 用单片测试仪测量电工钢带(片)磁性能的方法 |
China National Standards with |
English PDF |
GB/T 21737-2022 |
Provide consumers with information about products and related services 为消费者提供产品及相关服务的信息 |
China National Standards with |
English PDF |
Find out:1746Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 |