GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 31723.414-2021 |
Metallic communication cable test methods—Part 4-14: Electromagnetic compatibility (EMC)—Coupling attenuation of cable assemblies (field conditions)—Absorbing clamp method 金属通信电缆试验方法 第4-14部分:电磁兼容 电缆组件(现场条件)的耦合衰减 吸收钳法 |
China National Standards bin |
English PDF |
GB/T 31723.413-2021 |
Metallic communication cable test methods—Part 4-13: Electromagnetic compatibility (EMC)—Coupling attenuation of links and channels(laboratory conditions)—Absorbing clamp method 金属通信电缆试验方法 第4-13部分:电磁兼容 链路和信道(实验室条件)的耦合衰减 吸收钳法 |
China National Standards bin |
English PDF |
GB/T 31723.412-2021 |
Metallic communication cable test methods—Part 4-12: Electromagnetic compatibility (EMC)—Coupling attenuation or screening attenuation of connecting hardware—Absorbing clamp method 金属通信电缆试验方法 第4-12部分:电磁兼容 连接硬件的耦合衰减或屏蔽衰减 吸收钳法 |
China National Standards bin |
English PDF |
GB/T 41171-2021 |
Urine-absorbing aids for incontinence -- Measurement of airborne respirable polyacrylate superabsorbent materials -- Determination of dust in collection cassettes by sodium atomic absorption spectrometry 失禁用尿吸收辅助器具? 空气中可吸入聚丙烯酸高吸水性材料测量 钠原子吸收光谱法对采集盒粉尘的测定 |
China National Standards bin |
English PDF |
GB/T 41024-2021 |
Load combination and design criteria for structural analysis of spent fuel transport cask 乏燃料运输容器结构分析的载荷组合和设计准则 |
China National Standards bin |
English PDF |
GB/T 40928-2021 |
Telemark skis and bindings—Binding mounting area—Requirements and test methods 特里马滑雪板 固定器安装区 要求和试验方法 |
China National Standards bin |
English PDF |
GB/T 40923.1-2021 |
Snowboards—binding mounting area—Part 1:Requirements and test methods for snowboards without inserts 滑雪单板 固定器安装区 第1部分:无嵌件滑雪单板的要求和试验方法 |
China National Standards bin |
English PDF |
GB/T 40925-2021 |
Snowboard strap bindings for soft boots—Requirements and test methods 滑雪单板软靴束带固定器 要求和试验方法 |
China National Standards bin |
English PDF |
GB/T 40922-2021 |
Telemark ski-boots for adults—Interface with Telemark ski-bindings—Requirements and test methods 成人特里马滑雪靴 特里马滑雪板固定器接口 要求和试验方法 |
China National Standards bin |
English PDF |
GB/T 40924-2021 |
Snowboard-boots—Interface with snowboard bindings 单板滑雪靴 滑雪板固定器接口 |
China National Standards bin |
English PDF |
GB/T 40932-2021 |
Snowboard step-in bindings—Requirements and test methods 滑雪单板踏入式固定器 要求和试验方法 |
China National Standards bin |
English PDF |
GB/T 40923.2-2021 |
Snowboards—binding mounting area—Part 2:Requirements and test methods for snowboards with inserts 滑雪单板 固定器安装区 第2部分:含嵌件滑雪单板的要求和试验方法 |
China National Standards bin |
English PDF |
GB/T 40940-2021 |
Snowboard plate-bindings—Requirements and test methods 滑雪单板固定器 要求和试验方法 |
China National Standards bin |
English PDF |
GB/T 40930-2021 |
Touring ski-boots for adults—Interface with touring ski-bindings—Requirements and test methods 成人旅行滑雪靴 旅行滑雪板固定器接口 要求和试验方法 |
China National Standards bin |
English PDF |
GB/T 40739-2021 |
Gas turbines -- Data acquisition and trend monitoring system requirements for gas turbine installations 燃气轮机? 燃气轮机设备的数据采集和趋势监测系统要求 |
China National Standards bin |
English PDF |
GB/T 13675-2021 |
Aero-derivative gas turbines preparation for packing and shipping 航空派生型燃气轮机包装与运输 |
China National Standards bin |
English PDF |
GB/T 40815.4-2021 |
Mechanical structures for electrical and electronic equipment—Thermal managementfor cabinets in accordance with inch and metric system—Part 4:Cooling performance tests for water supplied heat exchangers in electronic cabinets 电气和电子设备机械结构 符合英制系列和公制系列机柜的热管理 第4部分:电子机柜中供水热交换器的冷却性能试验 |
China National Standards bin |
English PDF |
GB/T 40815.2-2021 |
Mechanical structures for electrical and electronic equipment—Thermal management for cabinets in accordance with inch and metric system—Part 2:Method for the determination of forced air cooling 电气和电子设备机械结构 符合英制系列和公制系列机柜的热管理 第2部分:强迫风冷的确定方法 |
China National Standards bin |
English PDF |
GB/T 18663.2-2021 |
Mechanical structures for electronic equipment—Tests for metric and inch system—Part 2: Seismic tests for cabinets and racks 电子设备机械结构 公制系列和英制系列的试验 第2部分:机柜和机架的地震试验 |
China National Standards bin |
English PDF |
GB/T 19290.7-2021 |
Modular order for the development of mechanical structures for electronic equipment practices—Part 2-5:Sectional specification—Interface co-ordination dimensions for the 25 mm equipment practice—Cabine tinterface dimensions for miscellaneous equipment 发展中的电子设备构体机械结构模数序列 第2-5部分:分规范 25 mm设备构体的接口协调尺寸 各种设备用机柜接口尺寸 |
China National Standards bin |
English PDF |
GB/T 40738-2021 |
Investment casting—Technical specification for rapid shell build with colloidal silica binder 熔模铸造 硅溶胶快速制壳工艺规范 |
China National Standards bin |
English PDF |
GB/T 40610-2021 |
Technical specifications for binary description and interchange of power system online power flow data 电力系统在线潮流数据二进制描述及交换规范 |
China National Standards bin |
English PDF |
GB/T 40920-2021 |
Leather—Tests for colour fastness—Colour fastness to cycles of to-and-fro rubbing 皮革 色牢度试验 往复式摩擦色牢度 |
China National Standards bin |
English PDF |
GB/T 39037.1-2021 |
Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships—General requirements—Part 1:Commercial vehicles and combinations of vehicles,semi-trailers excluded 用于海上滚装船运输的道路车辆的系固点与系固设施布置 通用要求 第1部分:商用车和汽车列车(不包括半挂车) |
China National Standards bin |
English PDF |
GB/T 39518-2020 |
Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems 产品几何技术规范(GPS) 使用单探针和多探针接触式探测系统坐标测量机的检测不确定度评估指南 |
China National Standards bin |
English PDF |
GB/T 39096-2020 |
Petroleum and natural gas industries—Aluminium alloy pipe for use as tubing for wells 石油天然气工业 油气井油管用铝合金管 |
China National Standards bin |
English PDF |
GB/T 25117-2020 |
Railway applications—Rolling stock—Combined test method for traction systems 轨道交通 机车车辆 牵引系统组合试验方法 |
China National Standards bin |
English PDF |
GB/T 38989-2020 |
Uniaxial compressive elastic modulus test method of materials stabilazed with inorganic binder(middle segment method) 无机结合料稳定类材料单轴压缩弹性模量试验方法(中间段法) |
China National Standards bin |
English PDF |
GB/T 38990-2020 |
Waterborne epoxylite emulsified binder mixture for road engineering 道路用水性环氧树脂乳化沥青混合料 |
China National Standards bin |
English PDF |
GB/T 38921-2020 |
Specification of steam turbine safty protection system for thermal power plant 火力发电厂汽轮机安全保护系统技术条件 |
China National Standards bin |
English PDF |
GB/T 22578.3-2020 |
Electrical insulation system (EIS)—Thermal evaluation of combined liquid and solid components—Part 3:Hermetic motor-compressors 电气绝缘系统(EIS) 液体和固体组件的热评定 第3部分:密封式电动机-压缩机 |
China National Standards bin |
English PDF |
GB/T 15468-2020 |
Fundamental technical requirements for hydraulic turbines 水轮机基本技术条件 |
China National Standards bin |
English PDF |
GB/T 2423.27-2020 |
Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests 环境试验 第2部分:试验方法 试验方法和导则:温度/低气压或温度/湿度/低气压综合试验 |
China National Standards bin |
English PDF |
GB/T 13319-2020 |
Geometrical product specifications (GPS)—Geometrical tolerancing—Pattern and combined geometrical specification 产品几何技术规范(GPS) 几何公差 成组(要素)与组合几何规范 |
China National Standards bin |
English PDF |
GB/T 38599-2020 |
Safety valves and bursting disc safety devices in combination 安全阀与爆破片安全装置的组合 |
China National Standards bin |
English PDF |
GB/T 16857.901-2020 |
Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 901: CMMs with multiple imaging probing system 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第901部分:配置多影像探测系统的坐标测量机 |
China National Standards bin |
English PDF |
GB/T 38552-2020 |
Code of practice for the safe use of mast climbing work platforms 导架爬升式工作平台安全使用规程 |
China National Standards bin |
English PDF |
GB/T 39564.1-2020 |
Multi-carrier shared distribution infrastructure for fibre to the home—Part 1: Optical cable cross-connect cabinet 光纤到户用多电信业务经营者共用型配线设施 第1部分:光缆交接箱 |
China National Standards bin |
English PDF |
GB/T 19212.24-2020 |
Safety of transformers, reactors, power supply units and combinations thereof—Part 24:Particular requirements and test for transformers and power supply units for construction sites 变压器、电抗器、电源装置及其组合的安全 第24部分:建筑工地用变压器和电源装置的特殊要求和试验 |
China National Standards bin |
English PDF |
GB/T 19212.11-2020 |
Safety of transformers, reactors, power supply units and combinations thereof—Part 11: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V 变压器、电抗器、电源装置及其组合的安全 第11部分:高绝缘水平分离变压器和输出电压超过1 000 V的分离变压器的特殊要求和试验 |
China National Standards bin |
English PDF |
GB/T 39711-2020 |
Sulphoaluminate cement mending binder for marine engineering 海洋工程用硫铝酸盐水泥修补胶结料 |
China National Standards bin |
English PDF |
GB/T 23755-2020 |
Three-phase site-combined power transformer 三相组合式电力变压器 |
China National Standards bin |
English PDF |
GB/T 21962-2020 |
Corn combine harvester 玉米收获机械 |
China National Standards bin |
English PDF |
GB/T 18663.3-2020 |
Mechanical structures for electronic equipment—Tests for metric and inch system—Part 3: Electromagnetic shielding performance tests for cabinets and subracks 电子设备机械结构 公制系列和英制系列的试验 第3部分:机柜和插箱的电磁屏蔽性能试验 |
China National Standards bin |
English PDF |
GB/T 14098-2020 |
Turbines and turbine sets—Measurement of emitted airborne noise—Engineering/survey method 燃气轮机和燃气轮机机组 气载噪声的测量 工程法/简易法 |
China National Standards bin |
English PDF |
GB/T 39381.1-2020 |
Cardiovascular implants—Vascular device-drug combination products—Part 1:General requirements 心血管植入物 血管药械组合产品 第1部分:通用要求 |
China National Standards bin |
English PDF |
GB/T 39249-2020 |
Rubber and plastics hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test 橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验 |
China National Standards bin |
English PDF |
GB/T 14561-2019 |
Fire hydrant cabinet 消火栓箱 |
China National Standards bin |
English PDF |
GB/T 38433-2019 |
General technical specifications for sightseeing combination bus 非公路用旅游观光列车通用技术条件 |
China National Standards bin |
English PDF |
GB/T 14561-2019 |
Fire hydrant cabinet GB/T 14561-2019 |
China National Standards bin |
English PDF |
GB/T 2423.35-2019 |
Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests 环境试验 第2部分:试验和导则 气候(温度、湿度)和动力学(振动、冲击)综合试验 |
China National Standards bin |
English PDF |
GB/T 37995-2019 |
Rubber ring of main drive chain for wind turbine generator system 风力发电机组主传动链系统橡胶密封圈 |
China National Standards bin |
English PDF |
GB/T 37921-2019 |
Wind turbines generator system under high altitude 高海拔型风力发电机组 |
China National Standards bin |
English PDF |
GB/T 37898-2019 |
Wind turbines—Safety technical regulation for hoisting 风力发电机组 吊装安全技术规程 |
China National Standards bin |
English PDF |
GB/T 19068.3-2019 |
Small wind turbines—Part 3: Wind tunnel test methods 小型风力发电机组 第3部分:风洞试验方法 |
China National Standards bin |
English PDF |
GB/T 13893.2-2019 |
Paints and varnishes—Determination of resistance to humidity—Part 2: Condensation(in-cabinet exposure with heated water reservoir) 色漆和清漆 耐湿性的测定 第2部分:冷凝(在带有加热水槽的试验箱内曝露) |
China National Standards bin |
English PDF |
GB/T 37766-2019 |
General specification for airborne absorbing metamaterial 机载吸波超材料通用规范 |
China National Standards bin |
English PDF |
GB/T 37679-2019 |
Sheet metal parts fabricated by fine blanking combined with extrusion process—Technological specification 金属板料精冲挤压复合成形件 工艺规范 |
China National Standards bin |
English PDF |
GB/T 11805-2019 |
General specifications of automatic control components (devices) and their related system for hydroturbine-generating sets 水轮发电机组自动化元件(装置)及其系统基本技术条件 |
China National Standards bin |
English PDF |
GB/T 9652.2-2019 |
Testing specification of hydraulic turbine governing systems 水轮机调速系统试验 |
China National Standards bin |
English PDF |
GB/T 9652.1-2019 |
Specification of hydraulic turbine governing systems 水轮机调速系统技术条件 |
China National Standards bin |
English PDF |
GB/T 2423.35-2019 |
Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests 环境试验 第2部分:试验和导则 气候(温度、湿度)和动力学(振动、冲击)综合试验 |
China National Standards bin |
English PDF |
GB/T 37431-2019 |
Wind turbines—Guide for infrared detection of rotor blade 风力发电机组 风轮叶片红外热像检测指南 |
China National Standards bin |
English PDF |
GB/T 37424-2019 |
Offshore wind turbines -Requirements for operation and maintenance 海上风力发电机组 运行及维护要求 |
China National Standards bin |
English PDF |
GB/T 2423.63-2019 |
Environmental testing—Part 2:Test methods—Test:combined temperature(cold and heat)/low air pressure/vibration(mixed mode) 环境试验 第2部分:试验方法 试验:温度(低温、高温)/低气压/振动(混合模式)综合 |
China National Standards bin |
English PDF |
GB/T 37320-2019 |
Ships and marine technology—Marine magnetic compasses, binnacles and azimuth reading devices 船舶和海上技术 船用磁罗经、罗经柜和方位读数仪 |
China National Standards bin |
English PDF |
GB/T 19520.18-2018 |
Mechanical structures for electronic equipment—Dimensions of mechanical structures of the 482.6 mm (19 in) series—Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1 电子设备机械结构-482.6-mm(19-in)系列机械结构尺寸-第3-106部分:适用于符合IEC-60917-2-1公制机柜或机架的插箱和机箱的适配尺寸 |
China National Standards bin |
English PDF |
GB/T 36998-2018 |
Technical requirements and measurement methods for ASI combiner/splitter used in program distribution network 节目分配网络ASI合路/分路器技术要求和测量方法 |
China National Standards bin |
English PDF |
GB/T 36996-2018 |
Permanent magnet disc coreless generator for wind turbines 风力发电机组用永磁盘式无铁芯发电机 |
China National Standards bin |
English PDF |
GB/T 37257-2018 |
Wind turbines—Measurement of mechanical loads 风力发电机组-机械载荷测量 |
China National Standards bin |
English PDF |
GB/T 36995-2018 |
Wind turbines—Test procedure of voltage fault ride through capability 风力发电机组-故障电压穿越能力测试规程 |
China National Standards bin |
English PDF |
GB/T 36994-2018 |
Wind turbines—Test procedure of grid adaptability 风力发电机组-电网适应性测试规程 |
China National Standards bin |
English PDF |
GB/T 37145-2018 |
Cabinets for low-voltage switchgear—Mechanical structures for drawout functional unit 低压机柜-抽出式功能单元机械结构 |
China National Standards bin |
English PDF |
GB/T 5170.19-2018 |
Inspection methods for environmental testing equipments—Part 19:Combined temperature vibration(sinusoidal) testing equipment 环境试验设备检验方法-第19部分:温度、振动(正弦)综合试验设备 |
China National Standards bin |
English PDF |
GB/T 25384-2018 |
Wind turbines—Full scale structural testing of rotor blade 风力发电机组-风轮叶片全尺寸结构试验 |
China National Standards bin |
English PDF |
GB/T 15135-2018 |
Gas turbines—Vocabulary 燃气轮机-词汇 |
China National Standards bin |
English PDF |
GB/T 37272-2018 |
Determination of 11-nor-9-carboxy-delta-9-tetrahydrocannabinol in urine—Liquid chromatography-tandem mass spectrometry method 尿液中△9-四氢大麻酸的测定-液相色谱-串联质谱法 |
China National Standards bin |
English PDF |
GB/T 51311-2018 |
Wind and light storage combined power station commissioning and acceptance criteria 风光储联合发电站调试及验收标准 |
China National Standards bin |
English PDF |
GB/T 26068-2018 |
Test method for carrier recombination lifetime in silicon wafers and silicon ingots—Non-contact measurement of photoconductivity decay by microwave reflectance method 硅片和硅锭载流子复合寿命的测试-非接触微波反射光电导衰减法 |
China National Standards bin |
English PDF |
GB/T 37144-2018 |
Cabinets for low-voltage switchgear—Electrical mechanical structures 低压机柜-电气机械结构 |
China National Standards bin |
English PDF |
GB/T 36237-2018 |
Wind turbines—Electrical simulation models 风力发电机组 电气仿真模型 |
China National Standards bin |
English PDF |
GB/T 22437.1-2018 |
Cranes—Design principles for loads and load combinations—Part 1:General 起重机 载荷与载荷组合的设计原则 第1部分:总则 |
China National Standards bin |
English PDF |
GB/T 36160.1-2018 |
Technical specification for distributed energy system of combined cooling, heating and power—Part 1:Refrigeration and heating subsystem 分布式冷热电能源系统技术条件 第1部分:制冷和供热单元 |
China National Standards bin |
English PDF |
GB/T 36160.2-2018 |
Technical specification for distributed energy system of combined cooling,heating and power-Part 2:Power subsystem 分布式冷热电能源系统技术条件 第2部分:动力单元 |
China National Standards bin |
English PDF |
GB/T 19071.1-2018 |
Wind turbines—Asynchronous generator—Part 1: Technical conditions 风力发电机组 异步发电机 第1部分:技术条件 |
China National Standards bin |
English PDF |
GB/T 36154-2018 |
Cabin public information marking of civil aircraft 民用飞机客舱公共信息标识 |
China National Standards bin |
English PDF |
GB/T 36285-2018 |
Specification of steam turbine electro-hydraulic control system for thermal power plant 火力发电厂汽轮机电液控制系统技术条件 |
China National Standards bin |
English PDF |
GB/T 36283-2018 |
General technical specifications for secondary cabin of smart substation 智能变电站二次舱通用技术条件 |
China National Standards bin |
English PDF |
GB/T 25389.2-2018 |
Wind turbines—Permanent magnet synchronous generator—Part 2: Testing methods 风力发电机组 永磁同步发电机 第2部分:试验方法 |
China National Standards bin |
English PDF |
GB/T 8013.2-2018 |
Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 2: Combined coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第2部分:阳极氧化复合膜 |
China National Standards bin |
English PDF |
GB/T 25389.1-2018 |
Wind turbines—Permanent magnet synchronous generator—Part 1: Technical conditions 风力发电机组 永磁同步发电机 第1部分:技术条件 |
China National Standards bin |
English PDF |
GB/T 36140-2018 |
Technical requirements for assembled insulation combination wall composite by glass fiber reinforced inorganic materials 装配式玻纤增强无机材料复合保温墙体技术要求 |
China National Standards bin |
English PDF |
GB/T 5591.3-2018 |
Combined flexible materials for electrical insulation—Part 3:Specifications for individual materials 电气绝缘用柔软复合材料 第3部分:单项材料规范 |
China National Standards bin |
English PDF |
GB/T 22140-2018 |
Code for field acceptance test of small hydro turbines 小型水轮机现场验收试验规程 |
China National Standards bin |
English PDF |
GB/T 12539-2018 |
Motor vehicles steep hill climbing test method 汽车爬陡坡试验方法 |
China National Standards bin |
English PDF |
GB/T 36490-2018 |
Wind turbines—Technical specification of lightning protection system inspection 风力发电机组 防雷装置检测技术规范 |
China National Standards bin |
English PDF |
GB/T 19071.2-2018 |
Wind turbines—Asynchronous generatorg—Part 2: Testing methods 风力发电机组 异步发电机 第2部分:试验方法 |
China National Standards bin |
English PDF |
GB/T 36372-2018 |
Cleanrooms and associated controlled environments—General technical requirements of combined envelope structure 洁净室及相关受控环境 组合式围护结构通用技术要求 |
China National Standards bin |
English PDF |
GB/T 36436-2018 |
Information technology—Learning, education and training—XML binding of simple sequencing on courses 信息技术 学习、教育和培训 简单课程编列XML绑定 |
China National Standards bin |
English PDF |
GB/T 36438-2018 |
Learning design XML binding specification 学习设计XML绑定规范 |
China National Standards bin |
English PDF |
Find out:791Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 |