GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 2031-2018 |
Marine fIRe coupling 船用消防接头 |
China National Standards IR |
English PDF |
GB/T 2032-2018 |
Marine flanged fIRe hydrants 船用法兰消火栓 |
China National Standards IR |
English PDF |
GB/T 37219-2018 |
Safety requIRements of inflatable play equipment 充气式游乐设施安全规范 |
China National Standards IR |
English PDF |
GB/T 5173-2018 |
Surface active agents—Detergents—Determination of anionic-active matter content—DIRect two-phase titration procedure 表面活性剂-洗涤剂-阴离子活性物含量的测定-直接两相滴定法 |
China National Standards IR |
English PDF |
GB/T 37115-2018 |
Protocol of diagnosis for infection with abalone herpersvIRus 鲍疱疹病毒病诊断规程 |
China National Standards IR |
English PDF |
GB/T 37104-2018 |
Packaging—Tactile warnings of danger—RequIRements 包装-触摸危险警示-要求 |
China National Standards IR |
English PDF |
GB/T 37128-2018 |
Technical requIRements for X-ray computed tomography security inspection systems X射线计算机断层成像安全检查系统技术要求 |
China National Standards IR |
English PDF |
GB/T 16716.2-2018 |
Packaging and the envIRonment—Part 2:Optimization of the packaging system 包装与环境-第2部分:包装系统优化 |
China National Standards IR |
English PDF |
GB/T 5170.13-2018 |
Inspection methods for envIRonmental testing equipments—Part 13: Mechanical vibrating type system for vibration(sinusoidal) test 环境试验设备检验方法-第13部分:振动(正弦)试验用机械式振动系统 |
China National Standards IR |
English PDF |
GB/T 5170.15-2018 |
Inspection methods for envIRonmental testing equipments—Part 15:Hydraulic vibrating type system for vibration(sinusoidal) test 环境试验设备检验方法-第15部分:振动(正弦)试验用液压式振动系统 |
China National Standards IR |
English PDF |
GB/T 5170.19-2018 |
Inspection methods for envIRonmental testing equipments—Part 19:Combined temperature vibration(sinusoidal) testing equipment 环境试验设备检验方法-第19部分:温度、振动(正弦)综合试验设备 |
China National Standards IR |
English PDF |
GB/T 5170.16-2018 |
Inspection methods for envIRonmental testing equipments—Part 16:Centrifugal machines for constant acceleration test 环境试验设备检验方法-第16部分:稳态加速度试验用离心机 |
China National Standards IR |
English PDF |
GB/T 2423.47-2018 |
EnvIRonmental testing—Part 2: Test methods—Test Fg: Acoustic vibration 环境试验-第2部分:试验方法-试验Fg:声振 |
China National Standards IR |
English PDF |
GB/T 2423.48-2018 |
EnvIRonmental testing—Part 2:Test methods—Test Ff: Vibration—Time-history and sine-beat method 环境试验-第2部分:-试验方法-试验Ff:振动-时间历程和正弦拍频法 |
China National Standards IR |
English PDF |
GB/T 2423.39-2018 |
EnvIRonmental testing—Part 2:Test methods—Test Ee and guidance:Loose cargo testing including bounce 环境试验-第2部分:试验方法-试验Ee和导则:散装货物试验包含弹跳 |
China National Standards IR |
English PDF |
GB/T 2423.56-2018 |
EnvIRonmental testing—Part 2:Test methods—Test Fh:Vibration, broadband random and guidance 环境试验-第2部分:试验方法-试验Fh:宽带随机振动和导则 |
China National Standards IR |
English PDF |
GB/T 4473-2018 |
Synthetic testing of high—voltage alternating current cIRcuit—breakers 高压交流断路器的合成试验 |
China National Standards IR |
English PDF |
GB/T 5174-2018 |
Surface active agents—Detergents—Determination of cationic-active matter content—DIRect two-phase titration procedure 表面活性剂-洗涤剂-阳离子活性物含量的测定-直接两相滴定法 |
China National Standards IR |
English PDF |
GB/T 11498-2018 |
Semiconductor devices—Integrated cIRcuits—Part 21:Sectional specification for film integrated circuits and hybrid film integrated circuits on the basis of the qualification approval procedures 半导体器件-集成电路-第21部分:膜集成电路和混合膜集成电路分规范(采用鉴定批准程序)半导体器件-集成电路-第21部分:膜集成电路和混合膜集成电路分规范(采用鉴定批准程序) |
China National Standards IR |
English PDF |
GB/T 8196-2018 |
Safety of machinery—Guards—General requIRements for the design and construction of fixed and movable guards 机械安全-防护装置-固定式和活动式防护装置的设计与制造一般要求 |
China National Standards IR |
English PDF |
GB/T 35451.2-2018 |
Polypropylene(PP) structure-wall piping systems for underground drainage and sewerage—Part 2: Polypropylene spIRally enwound structure-wall pipes 埋地排水排污用聚丙烯(PP)结构壁管道系统-第2部分:聚丙烯缠绕结构壁管材 |
China National Standards IR |
English PDF |
GB/T 19812.4-2018 |
Plastic equipment for water saving IRrigation—Part 4:Polyethylene (PE) flexible pipe 塑料节水灌溉器材-第4部分:-聚乙烯(PE)软管 |
China National Standards IR |
English PDF |
GB/T 2423.7-2018 |
EnvIRonmental testing—Part 2:Test methods—Test Ec:Rough handling shocks,primarily for equipment—type specimens 环境试验-第2部分:试验方法-试验Ec:粗率操作造成的冲击(主要用于设备型样品) |
China National Standards IR |
English PDF |
GB/T 31070.2-2018 |
Building intercom systems—Part 2: Technical requIRements for digital building intercom systems 楼寓对讲系统-第2部分:全数字系统技术要求 |
China National Standards IR |
English PDF |
GB/T 13062-2018 |
Semiconductor devices—Integrated cIRcuits—Part 21-1:Blank detail specification for film integrated circuits and hybrid film integrated circuits on the basis of the qualification approval procedures 半导体器件-集成电路-第21-1部分:膜集成电路和混合膜集成电路空白详细规范(采用鉴定批准程序) |
China National Standards IR |
English PDF |
GB/T 15805.5-2018 |
Protocol of diagnosis for spring vIRaemia of carp 鲤春病毒血症诊断规程 |
China National Standards IR |
English PDF |
GB/T 22072-2018 |
Specifications and technical requIRements for dry-type amorphous alloy core distribution transformers 干式非晶合金铁心配电变压器技术参数和要求 |
China National Standards IR |
English PDF |
GB/T 20626.2-2018 |
Specific envIRonmental condition—Electrical and electronic products for plateau—Part 2: Selective types and testing specification 特殊环境条件-高原电工电子产品-第2部分:选型和检验规范 |
China National Standards IR |
English PDF |
GB/T 28026.2-2018 |
Railway applications—Fixed installations—Electrical safety,earthing and the return cIRcuit—Part 2:Provisions against the effects of stray currents caused by d.c. traction systems 轨道交通-地面装置-电气安全、接地和回流-第2部分:直流牵引供电系统杂散电流的防护措施 |
China National Standards IR |
English PDF |
GB/T 28026.1-2018 |
Railway applications—Fixed installations—Electrical safety,earthing and the return cIRcuit—Part 1:Protective provisions against electric shock 轨道交通-地面装置-电气安全、接地和回流-第1部分:电击防护措施 |
China National Standards IR |
English PDF |
GB/T 19278-2018 |
General terms and theIR definitions of thermoplastic pipes, fittings and valves 热塑性塑料管材、管件与阀门-通用术语及其定义 |
China National Standards IR |
English PDF |
GB/T 21152-2018 |
Earth-moving machinery—Wheeled or high-speed rubber-tracked machines—Performance requIRements and test procedures for brake systems 土方机械-轮式或高速橡胶履带式机器-制动系统的性能要求和试验方法 |
China National Standards IR |
English PDF |
GB/T 22576.1-2018 |
Medical laboratories—RequIRements for quality and competence—Part 1: General requirements 医学实验室-质量和能力的要求-第1部分:通用要求 |
China National Standards IR |
English PDF |
GB/T 36997-2018 |
Hydraulic fluid power—Identification of manifold assemblies and theIR components 液压传动-油路块总成及其元件的标识 |
China National Standards IR |
English PDF |
GB/T 37036.1-2018 |
Information technology—Biometrics used with mobile devices—Part1: General requIRement 信息技术-移动设备生物特征识别-第1部分:通用要求 |
China National Standards IR |
English PDF |
GB/T 36950-2018 |
Information security technology—Security technical requIRements of smart card (EAL4+) 信息安全技术-智能卡安全技术要求(EAL4+) |
China National Standards IR |
English PDF |
GB/T 37076-2018 |
Information security technology—Technical requIRements for fingerprint recognition system 信息安全技术-指纹识别系统技术要求 |
China National Standards IR |
English PDF |
GB/T 36957-2018 |
Information security technology —RequIRements for disaster recovery service 信息安全技术-灾难恢复服务要求 |
China National Standards IR |
English PDF |
GB/T 37228-2018 |
Societal security—Emergency management—RequIRements for incident response 公共安全-应急管理-突发事件响应要求 |
China National Standards IR |
English PDF |
GB 14907-2018 |
FIRe resistive coating for steel structure 钢结构防火涂料 |
China National Standards IR |
English PDF |
GB/T 37045-2018 |
Information technology — Biometrics—Fingerprint processing chip technical requIRements 信息技术-生物特征识别-指纹处理芯片技术要求 |
China National Standards IR |
English PDF |
GB/T 50491-2018 |
IRon ore pellet engineering design standard 铁矿球团工程设计标准 |
China National Standards IR |
English PDF |
GB/T 37600.11-2018 |
National central product classification—Product category core metadata—Part 11:Magnetic stripe card and integrated cIRcuit card 全国主要产品分类-产品类别核心元数据-第11部分:磁卡与集成电路卡 |
China National Standards IR |
English PDF |
GB/T 37173-2018 |
Technical requIRements for access network-Interoperability of GPON system 接入网技术要求-GPON系统互通性 |
China National Standards IR |
English PDF |
GB/T 37083-2018 |
Technical requIRements for access network—Interoperability of ethernet passive optical network(EPON)system 接入网技术要求-EPON系统互通性 |
China National Standards IR |
English PDF |
GB/T 37081-2018 |
Technical requIRements for access network—10Gbit/s ethernet passive optical network (10G-EPON) 接入网技术要求-10Gbit/s-以太网无源光网络(10G-EPON) |
China National Standards IR |
English PDF |
GB/T 36914.2-2018 |
Textile machinery and accessories—Rings and travellers for ring spinning and ring twisting frames—Part 2: HZ-and J-rings and theIR travellers 纺织机械与附件-环锭细纱机和环锭捻线机用钢领和钢丝圈-第2部分:HZ型和J型钢领和配用的钢丝圈 |
China National Standards IR |
English PDF |
GB/T 50337-2018 |
Urban envIRonmental sanitation planning standards 城市环境卫生设施规划标准 |
China National Standards IR |
English PDF |
GB 50414-2018 |
Steel metallurgical enterprise design fIRe protection standard 钢铁冶金企业设计防火标准 |
China National Standards IR |
English PDF |
GB/T 1147.1-2017/XG1-2018 |
Small and medium power internal combustion engines - Part 1:General requIRements 《中小功率内燃机-第1部分:通用技术条件》国家标准第1号修改单 |
China National Standards IR |
English PDF |
GB 51309-2018 |
Technical standards for fIRe emergency lighting and evacuation indication systems 消防应急照明和疏散指示系统技术标准 |
China National Standards IR |
English PDF |
GB/T 50559-2018 |
Flat glass factory envIRonmental protection facility design standards 平板玻璃工厂环境保护设施设计标准 |
China National Standards IR |
English PDF |
GB 36900.1-2018 |
Ductile Cast IRon High Integrity Container for Low-and-Intermediate Level Radioactive Solid Wastes 低、中水平放射性废物高完整性容器-球墨铸铁容器 |
China National Standards IR |
English PDF |
GB/T 51329-2018 |
Urban envIRonmental planning standard 城市环境规划标准 |
China National Standards IR |
English PDF |
GB 36893-2018 |
Minimum allowable values of the energy efficiency and energy efficiency grades for aIR cleaners 空气净化器能效限定值及能效等级 |
China National Standards IR |
English PDF |
GB 15208.1-2018 |
Micro-dose X-ray security inspection system—Part 1:General technical requIRements 微剂量X射线安全检查设备-第1部分:通用技术要求 |
China National Standards IR |
English PDF |
GB/T 37252-2018 |
ZIRconia ceramics element for planar oxygen sensor 氧传感器用片式氧化锆陶瓷元件 |
China National Standards IR |
English PDF |
GB/T 37212-2018 |
General technical specification of outdoor aIR conditioning equipment 新风空调设备通用技术条件 |
China National Standards IR |
English PDF |
GB/T 37192-2018 |
Classification and symbol for outdoor aIR conditioning equipment 新风空调设备分类与代号 |
China National Standards IR |
English PDF |
GB/T 37187-2018 |
Technology requIRement of the anti-corrosion materials for desulfurization chimneys 脱硫烟囱用防腐蚀材料技术要求 |
China National Standards IR |
English PDF |
GB/T 37214-2018 |
The requIRements for external ceramic tiles 陶瓷外墙砖通用技术要求 |
China National Standards IR |
English PDF |
GB/T 37201-2018 |
Electrochemical performance test of lithium nickel cobalt manganese oxide —Test method for discharge specific capacity and charge-discharge coulombic efficiency of the fIRst cycle 镍钴锰酸锂电化学性能测试-首次放电比容量及首次充放电效率测试方法 |
China National Standards IR |
English PDF |
GB/T 37211.2-2018 |
Methods for chemical analysis of germanium metal—Part 2:Determination of aluminium,IRon,copper,nickle,lead,cadmium, magnesium,cobalt,indium,zinc content—Inductively coupled plasma mass spectrometry method 金属锗化学分析方法-第2部分:铝、铁、铜、镍、铅、钙、镁、钴、铟、锌含量的测定-电感耦合等离子体质谱法 |
China National Standards IR |
English PDF |
GB/T 37256-2018 |
General technical requIRements of building outdoor bar screen 建筑室外用格栅通用技术要求 |
China National Standards IR |
English PDF |
GB/T 37184-2018 |
Corrosion control engineering life cycle of nuclear power plants—General requIRements 核电厂腐蚀控制工程全生命周期-通用要求 |
China National Standards IR |
English PDF |
GB/T 37190-2018 |
Pipeline corrosion control engineering life cycle—General requIRements 管道腐蚀控制工程全生命周期-通用要求 |
China National Standards IR |
English PDF |
GB/T 37263-2018 |
Prefabricated dIRectly buried insulating plastic-steel-plastic composite pipes with polyurethane [PUR]foamed-plastics and high density polyethylene [PE]casing pipes 高密度聚乙烯外护管聚氨酯发泡预制直埋保温钢塑复合管 |
China National Standards IR |
English PDF |
GB/T 37181-2018 |
Reinforced concrete corrosion control engineering life cycle—General requIRements 钢筋混凝土腐蚀控制工程全生命周期-通用要求 |
China National Standards IR |
English PDF |
GB/T 36905-2018 |
Electronic certificate—File technical requIRements 电子证照-文件技术要求 |
China National Standards IR |
English PDF |
GB/T 16289-2018E |
Chi-flavour Chinese spIRits 豉香型白酒(英文版) |
China National Standards IR |
English PDF |
GB/T 50466-2018 |
Code for design of heating ventilation and aIR conditioning of coal industry 煤炭工业供暖通风与空气调节设计标准 |
China National Standards IR |
English PDF |
GB/T 15432-1995/XG1-2018 |
Ambient aIR--Determination of total suspended particulates--Gravimetric method 《环境空气总悬浮颗粒物的测定重量法》第1号修改单 |
China National Standards IR |
English PDF |
GB/T 15264-1994/XG1-2018 |
Ambient aIR--Determination of lead--Flame atomic absorption spectrophotometric method 《环境空气铅的测定火焰原子吸收分光光度法》第1号修改单 |
China National Standards IR |
English PDF |
GB/T 2423.61-2018 |
EnvIRonmental testing—Part 2:Test methods—Test and guidance:Dust and sand test for large specimen 环境试验-第2部分:试验方法-试验和导则:大型试件砂尘试验 |
China National Standards IR |
English PDF |
GB/T 37274-2018 |
Specifications for safe fIRing area map drawing at weather modification rocket launching sites 人工影响天气火箭作业点安全射界图绘制规范 |
China National Standards IR |
English PDF |
GB/T 36926-2018 |
Modularization design for household and similar electrical appliances—Guideline of aIR conditioners 家用和类似用途电器的模块化-空调器的设计导则 |
China National Standards IR |
English PDF |
GB/T 37084-2018 |
General requIRement for photoelectric detection instruments reliability 光电检测仪器可靠性通用要求 |
China National Standards IR |
English PDF |
GB/T 37098-2018 |
Rating requIRements for knowledge diffusion competence of innovation method 创新方法知识扩散能力等级划分要求 |
China National Standards IR |
English PDF |
GB/T 16716.4-2018 |
Packaging and the envIRonment—Part 4:Material recycling 包装与环境-第4部分:材料循环再生 |
China National Standards IR |
English PDF |
GB/T 16716.3-2018 |
Packaging and the envIRonment—Part 3: Reuse 包装与环境-第3部分:重复使用 |
China National Standards IR |
English PDF |
GB/T 16716.1-2018 |
Packaging and the envIRonment—Part 1:General rules 包装与环境-第1部分:通则 |
China National Standards IR |
English PDF |
GB/T 17248.2-2018 |
Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible envIRonmental corrections 声学-机器和设备发射的噪声-在一个反射面上方可忽略环境修正的近似自由场测定工作位置和其他指定位置的发射声压级 |
China National Standards IR |
English PDF |
GB/T 17248.3-2018 |
Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions applying approximate envIRonmental corrections 声学-机器和设备发射的噪声-采用近似环境修正测定工作位置和其他指定位置的发射声压级 |
China National Standards IR |
English PDF |
GB/T 17248.5-2018 |
Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions applying accurate envIRonmental corrections 声学-机器和设备发射的噪声-采用准确环境修正测定工作位置和其他指定位置的发射声压级 |
China National Standards IR |
English PDF |
GB/T 20141-2018 |
Formed wIRe concentric lay overhead electrical stranded conductors 型线同心绞架空导线 |
China National Standards IR |
English PDF |
GB 23200.112-2018 |
National Food Safety Standards - Determination of 9 Carbamate Pesticides and TheIR Metabolite Residues in Plant-derived Foods - Liquid Chromatography - Post-Column Derivatization 食品安全国家标准-植物源性食品中9种氨基甲酸酯类农药及其代谢物残留量的测定-液相色谱-柱后衍生法 |
China National Standards IR |
English PDF |
GB 51298-2018 |
Subway design fIRe protection standard 地铁设计防火标准 |
China National Standards IR |
English PDF |
GB/T 51292-2018 |
WIReless communication indoor coverage system engineering technical standards 无线通信室内覆盖系统工程技术标准 |
China National Standards IR |
English PDF |
GB 50288-2018 |
IRrigation and drainage engineering design standards 灌溉与排水工程设计标准 |
China National Standards IR |
English PDF |
GB 51291-2018 |
Co-fIRed ceramic hybrid circuit substrate factory design standard 共烧陶瓷混合电路基板厂设计标准 |
China National Standards IR |
English PDF |
GB/T 50363-2018 |
Technical specification for water-saving IRrigation engineering 节水灌溉工程技术规范 |
China National Standards IR |
English PDF |
GB/T 36234-2018 |
Qualification testing of welders for fusion welding ontitanium and titanium alloys,zIRconium and zirconium alloys 钛及钛合金、锆及锆合金熔化焊焊工技能评定 |
China National Standards IR |
English PDF |
GB/T 7562-2018 |
Commercial coal quality—Coal for pulverized coal-fIRed boiler for power generation 商品煤质量 发电煤粉锅炉用煤 |
China National Standards IR |
English PDF |
GB/T 36221-2018 |
Thin extra light annular ball bearings primarily for aIRcraft generators and motor-generators 航空电机用薄超轻型深沟球轴承 |
China National Standards IR |
English PDF |
GB/T 36222-2018 |
General specification for deep groove bearings of aIRcraft generators and motor generators 航空电机用深沟球轴承通用规范 |
China National Standards IR |
English PDF |
GB/T 19974-2018 |
Sterilization of health care products—General requIRement for characterization of a sterilization agent and the development,validation and routine control of a sterilization process for medical devices 医疗保健产品灭菌 灭菌因子的特性及医疗器械灭菌过程的开发、确认和常规控制的通用要求 |
China National Standards IR |
English PDF |
GB/T 36223-2018 |
Wide cartridge annular ball bearings primarily for aIRcraft generators and motor-generators 航空电机用宽型深沟球轴承 |
China National Standards IR |
English PDF |
GB/T 36227-2018 |
Super-scale aIR separation plants 特大型空气分离设备 |
China National Standards IR |
English PDF |
GB/T 36230-2018 |
CNC Straight-side link-drive press—Performance requIRements and test methods 数控闭式多连杆压力机 性能要求与试验方法 |
China National Standards IR |
English PDF |
GB/T 23227-2018 |
Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability — Determination of aIR permeability 卷烟纸、成形纸、接装纸、具有间断或连续透气区的材料以及具有不同透气带的材料 透气度的测定 |
China National Standards IR |
English PDF |
Find out:10880Items | To Page of: First -Previous-Next -Last | [25] [26] [27] [28] [29] [30] [31] |