GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 2394-2013 |
DIsperse dyestuff - Determination of shade and relative strength 分散染料 色光和强度的测定 |
China National Standards I |
English PDF |
GB/T 2381-2013 |
Dyestuffs and Intermediate of dyestuffs - Determination of content of insoluble matters 染料及染料中间体 不溶物质含量的测定 |
China National Standards I |
English PDF |
GB/T 2380-2013 |
Mordant dyes - DetermInation of dyeing shade and relative strength 媒介染料 染色色光和强度的测定 |
China National Standards I |
English PDF |
GB/T 2375-2013 |
DIrect dyes - Determination of dyeing shade and relative strength 直接染料 染色色光和强度的测定 |
China National Standards I |
English PDF |
GB/T 2390-2013 |
Dyes - DetermInation of pH value 染料 pH值的测定 |
China National Standards I |
English PDF |
GB/T 18423-2013 |
Rubber and plastIcs hoses and tubing - Determination of transmission of liquids through hose and tubing walls 橡胶和塑料软管及非增强软管 液体壁透性测定 |
China National Standards I |
English PDF |
GB/T 1653-2013 |
o、p-ChloronItrobenzene 邻、对硝基氯苯 |
China National Standards I |
English PDF |
GB/T 16591-2013 |
Rubber hoses and hose assemblIes for transferring anhydrous ammonia - Specification 输送无水氨用橡胶软管及软管组合件 规范 |
China National Standards I |
English PDF |
GB/T 15336-2013 |
PhthalIc anhydride 邻苯二甲酸酐 |
China National Standards I |
English PDF |
GB/T 13646-2013 |
Rubber - DetermInation of bound styrene content - Spectrophotometric method 橡胶 结合苯乙烯含量的测定 分光光度法 |
China National Standards I |
English PDF |
GB/T 13288.4-2013 |
PreparatIon of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法 |
China National Standards I |
English PDF |
GB/T 11408-2013 |
VulcanIzing accelerator - Dibenzothiazole disulfide (MBTS) 硫化促进剂 二硫化二苯骈噻唑(MBTS) |
China National Standards I |
English PDF |
GB/T 11407-2013 |
VulcanIzing accelerator 2 - Mercaptobenzothiazole (MBT) 硫化促进剂2 巯基苯骈噻唑(MBT) |
China National Standards I |
English PDF |
GB/T 10546-2013 |
Rubber hoses and hose assemblIes for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2,5 MPa - Specification 在 2.5MPa及以下压力下输送液态或气态液化石油气(LPG)和天然气的橡胶软管及软管组合件 规范 |
China National Standards I |
English PDF |
GB/T 29625-2013 |
PublIc information graphical symbols for use on sign - Animal symbols 标志用公共信息图形符号 动物符号 |
China National Standards I |
English PDF |
GB/T 29624-2013 |
Layout key of consIgnment for the international trade 国际贸易托运单样式 |
China National Standards I |
English PDF |
GB/T 29622-2013 |
E-commerce credIt - The specifications for disclosing seller’s credit information of transaction 电子商务信用 卖方交易信用信息披露规范 |
China National Standards I |
English PDF |
GB/T 29621-2013 |
Documentary aspects of the International transport of dangerous goods 危险货物国际运输单证规范 |
China National Standards I |
English PDF |
GB/T 2893.4-2013 |
GraphIcal symbols - Safety colours and safety signs - Part 4: Colorimetric and photometric properties of safety sign materials 图形符号 安全色和安全标志 第4部分:安全标志材料的色度属性和光度属性 |
China National Standards I |
English PDF |
GB/T 2893.1-2013 |
GraphIcal symbols - Safety colours and safety signs - Part 1: Design principles for safety signs and safety markings 图形符号 安全色和安全标志 第1部分:安全标志和安全标记的设计原则 |
China National Standards I |
English PDF |
GB/T 20501.6-2013 |
PublIc information guidance systems - Design principles and requirements for guidance elements - Part 6: Direction sign 公共信息导向系统 导向要素的设计原则与要求 第6部分:导向标志 |
China National Standards I |
English PDF |
GB/T 20501.2-2013 |
PublIc information guidance systems - Design principles and requirements for guidance elements - Part 2: Location sign 公共信息导向系统 导向要素的设计原则与要求 第2部分:位置标志 |
China National Standards I |
English PDF |
GB/T 20501.1-2013 |
PublIc information guidance systems - Design principles and requirements for guidance elements - Part 1: General 公共信息导向系统 导向要素的设计原则与要求 第1部分:总则 |
China National Standards I |
English PDF |
GB/T 16903.3-2013 |
Rules for the presentatIon of graphical symbols for use on graphical signs - Part 3: Method for testing perceptibility 标志用图形符号表示规则 第3部分:感知性测试方法 |
China National Standards I |
English PDF |
GB/T 16903.2-2013 |
Rules for the presentatIon of graphical symbols for use on graphical signs - Part 2: Methods for testing comprehensibility 标志用图形符号表示规则 第2部分:理解度测试方法 |
China National Standards I |
English PDF |
GB/T 16902.3-2013 |
Rules for the presentatIon of graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols 设备用图形符号表示规则 第3部分:应用导则 |
China National Standards I |
English PDF |
GB/T 16472-2013 |
Codes for passengers,types of cargo,packages and packagIng materials 乘客及货物类型、包装类型和包装材料类型代码 |
China National Standards I |
English PDF |
GB/T 29637-2013 |
GC and GC-MS examInation methods for ketamine in suspected drug 疑似毒品中氯胺酮的气相色谱、气相色谱-质谱检验方法 |
China National Standards I |
English PDF |
GB/T 29636-2013 |
GC ,HPLC and GC-MS examInation methods for methylamphetamine in suspected drug 疑似毒品中甲基苯丙胺的气相色谱、高效液相色谱和气相色谱-质谱检验方法 |
China National Standards I |
English PDF |
GB/T 29635-2013 |
GC and GC-MS examInation methods for heroin in suspected drug 疑似毒品中海洛因的气相色谱、气相色谱-质谱检验方法 |
China National Standards I |
English PDF |
GB/T 29634-2013 |
General specIfication for permanent magnetic DC gearmotor using on electric wheelchairs 电动轮椅车用永磁直流齿轮减速电动机构通用技术条件 |
China National Standards I |
English PDF |
GB/T 29633.2-2013 |
AntarctIc geographical names - Part 2:Classification and code 南极地名 第2部分:分类与代码 |
China National Standards I |
English PDF |
GB/T 29633.1-2013 |
AntarctIc geographical names - Part 1: Generic terms 南极地名 第1部分:通名 |
China National Standards I |
English PDF |
GB/T 29639-2013 |
GuIdelines for enterprises to develop emergency response plan for work place accidents 生产经营单位生产安全事故应急预案编制导则 |
China National Standards I |
English PDF |
GB/T 29632-2013 |
The range of maIn parts and the guarantees certificate in repair replacement and return warranty of automobile 家用汽车产品三包主要零件种类范围与三包凭证 |
China National Standards I |
English PDF |
GB/T 18287-2013 |
General specIfication of lithium-ion cells and batteries for mobile phone 移动电话用锂离子蓄电池及蓄电池组总规范 |
China National Standards I |
English PDF |
GB/T 29563-2013 |
Management specIfication of wood protection 木材保护管理规范 |
China National Standards I |
English PDF |
GB/T 50903-2013 |
Code for constructIon organization plan of municipal engineering 市政工程施工组织设计规范 |
China National Standards I |
English PDF |
GB/T 50899-2013 |
Standard for basIc terminology of real estate appraisal 房地产估价基本术语标准 |
China National Standards I |
English PDF |
GB 50339-2013 |
Code for acceptance of qualIty of intelligent building systems 智能建筑工程质量验收规范 |
China National Standards I |
English PDF |
GB/T 7986-2013 |
Conveyor belts - Drum frIction testing 输送带 滚筒摩擦试验 |
China National Standards I |
English PDF |
GB/T 6759-2013 |
Conveyor belts - AdhesIon between constitutive elements - Test methods 输送带 层间粘合强度 试验方法 |
China National Standards I |
English PDF |
GB/T 5755-2013 |
Steel cord conveyor belts - Cord-to-coatIng bond test - Initial test and after thermal treatment 钢丝绳芯输送带 绳与包覆胶粘合试验 原始状态下和热老化后试验 |
China National Standards I |
English PDF |
GB/T 5752-2013 |
Conveyor belts - MarkIng 输送带 标志 |
China National Standards I |
English PDF |
GB/T 5678-2013 |
SamplIng methods of spectrochemical analysis for cast alloys 铸造合金光谱分析取样方法 |
China National Standards I |
English PDF |
GB/T 35-2013 |
Square head bolts wIth small head 小方头螺栓 |
China National Standards I |
English PDF |
GB/T 31.1-2013 |
Hexagon bolts wIth split pin hole on shank 六角头螺杆带孔螺栓 |
China National Standards I |
English PDF |
GB/T 29538-2013 |
Home applIcation V-ribbed belts 家电用多楔带 |
China National Standards I |
English PDF |
GB/T 29537-2013 |
PIpe threads with 80 degree thread angle where pressure-tight joints are not made on the threads 80°非密封管螺纹 |
China National Standards I |
English PDF |
GB/T 29536-2013 |
TestIng method for the forming limit diagram (FLD) of metal tube 金属管材成形极限图(FLD) 试验方法 |
China National Standards I |
English PDF |
GB/T 29535-2013 |
TechnologIcal design principle for combined warm-cold forging process 温锻冷锻联合成形工艺 工艺编制原则 |
China National Standards I |
English PDF |
GB/T 29534-2013 |
General specIfications of combined warm-cold forging parts 温锻冷锻联合成形锻件 通用技术条件 |
China National Standards I |
English PDF |
GB/T 29533-2013 |
CompIling method of technological norm for steel die forging material consumption 钢质模锻件材料消耗工艺定额编制方法 |
China National Standards I |
English PDF |
GB/T 29532-2013 |
General specIfication for steel precision hot die forgings 钢质精密热模锻件 通用技术条件 |
China National Standards I |
English PDF |
GB/T 29531-2013 |
Methods of measurIng and evaluating vibration of pumps 泵的振动测量与评价方法 |
China National Standards I |
English PDF |
GB/T 29529-2013 |
Methods of measurIng and evaluating noise of pumps 泵的噪声测量与评价方法 |
China National Standards I |
English PDF |
GB/T 29528-2013 |
SpecIfication of copper alloy forgings for valves 阀门用铜合金锻件技术条件 |
China National Standards I |
English PDF |
GB/T 29527-2013 |
GraphIcal symbols for common used equipments of powder processing 通用粉体加工设备图形标记 |
China National Standards I |
English PDF |
GB/T 29526-2013 |
Powder processIng techniques - General terminology 通用粉体加工技术 术语 |
China National Standards I |
English PDF |
GB/T 29525-2013 |
ChaIr height adjustment gas spring - Technical specification 座椅升降气弹簧 技术条件 |
China National Standards I |
English PDF |
GB/T 29.2-2013 |
Hexagon bolts wIth cross recess on head 六角头带十字槽螺栓 |
China National Standards I |
English PDF |
GB/T 29.1-2013 |
Hexagon bolts wIth slot on head 六角头带槽螺栓 |
China National Standards I |
English PDF |
GB/T 28-2013 |
Hexagon fIt shank bolts with split pin hole on shank 六角头螺杆带孔加强杆螺栓 |
China National Standards I |
English PDF |
GB/T 27-2013 |
Hexagon fIt shank bolts 六角头加强杆螺栓 |
China National Standards I |
English PDF |
GB/T 17044-2013 |
Steel cord conveyor belts - AdhensIon strength test of the cover to the core layer 钢丝绳芯输送带 覆盖层与带芯层粘合强度试验 |
China National Standards I |
English PDF |
GB/T 15-2013 |
Mushroom head nIb bolts 扁圆头带榫螺栓 |
China National Standards I |
English PDF |
GB/T 1414-2013 |
General purpose metrIc screw threads - The plan for pipe systems 普通螺纹 管路系列 |
China National Standards I |
English PDF |
GB/T 13916-2013 |
Unnoted tolerance of shape and posItion for stamping parts 冲压件形状和位置未注公差 |
China National Standards I |
English PDF |
GB/T 13915-2013 |
Tolerance of angles for stampIng parts 冲压件角度公差 |
China National Standards I |
English PDF |
GB/T 13914-2013 |
Tolerance of dImensions for stamping parts 冲压件尺寸公差 |
China National Standards I |
English PDF |
GB/T 13-2013 |
Cup head nIb bolts 圆头带榫螺栓 |
China National Standards I |
English PDF |
GB/T 11-2013 |
Countersunk head nIb bolts 沉头带榫螺栓 |
China National Standards I |
English PDF |
GB/T 29524-2013 |
Safety specIfication for Acid-making with Smelting Gas 冶炼烟气制酸安全生产规范 |
China National Standards I |
English PDF |
GB/T 29523-2013 |
Safety specIfication for zinc smelting(hydrometallurgy) 锌冶炼安全生产规范(湿法) |
China National Standards I |
English PDF |
GB/T 29522-2013 |
Safety specIfication for zinc smelting (pyrometallurgy) 锌冶炼安全生产规范(火法) |
China National Standards I |
English PDF |
GB/T 29521-2013 |
Safety specIfication for underground mining of tungsten mine 钨矿山地下开采安全生产规范 |
China National Standards I |
English PDF |
GB/T 29520-2013 |
Safety specIfication for copper smelting enterprise 铜冶炼安全生产规范 |
China National Standards I |
English PDF |
GB/T 29519-2013 |
Safety specIfication for lead smelting 铅冶炼安全生产规范 |
China National Standards I |
English PDF |
GB/T 29549.3-2013 |
SpecIfication for offshore modular drillling rigs on fixed platforms - Part 3:Hook-up,commissioning,and acceptance 海上石油固定平台模块钻机 第3部分:海上安装、调试与验收 |
China National Standards I |
English PDF |
GB/T 29549.2-2013 |
SpecIfications for offshore modular drilling rigs on fixed platforms - Part 2:Construction 海上石油固定平台模块钻机 第2部分:建造 |
China National Standards I |
English PDF |
GB/T 29549.1-2013 |
SpecIfications for offshore modular drilling rigs on fixed platforms - Part 1:Design 海上石油固定平台模块钻机 第1部分:设计 |
China National Standards I |
English PDF |
GB/T 29548-2013 |
HIgh speed precision straight side press - Testing of the accuracy 闭式高速精密压力机 精度 |
China National Standards I |
English PDF |
GB/T 29547-2013 |
Open front hIgh speed precision press - Testing of the accuracy 开式高速精密压力机 精度 |
China National Standards I |
English PDF |
GB/T 29546-2013 |
Methods of statIc load deflection measurement for straight-side presses 闭式压力机静载变形测量方法 |
China National Standards I |
English PDF |
GB/T 29545-2013 |
NumerIcal control system of machine tools - Reliability design 机床数控系统 可靠性设计 |
China National Standards I |
English PDF |
GB/T 29544-2013 |
Safety requIrements for off-gird type wind-solar photovoltaic hybrid electricity generating system 离网型风光互补发电系统 安全要求 |
China National Standards I |
English PDF |
GB/T 29543-2013 |
WInd turbine generator systems for cold environments 低温型风力发电机组 |
China National Standards I |
English PDF |
GB/T 29542-2013 |
Industrial off-gas energy recovery turbine expander 工业尾气能量回收透平膨胀机 |
China National Standards I |
English PDF |
GB/T 29590-2013 |
CrIteria for field management in enterprise 企业现场管理准则 |
China National Standards I |
English PDF |
GB 29541-2013 |
The mInimum allowable values of the energy efficiency and energy efficiency grades for heat pump water heaters 热泵热水机(器)能效限定值及能效等级 |
China National Standards I |
English PDF |
GB 29540-2013 |
MInimm allowable values of the energy efficiency and energy efficiency grades for lithium bromide absorption chillers 溴化锂吸收式冷水机组能效限定值及能效等级 |
China National Standards I |
English PDF |
GB 29539-2013 |
The mInimum allowable values of energy efficiency and energy efficiency grades for range hoods 吸油烟机能效限定值及能效等级 |
China National Standards I |
English PDF |
GB 24850-2013 |
MInimum allowable values of energy efficiency and energy efficiency grades for flat panel televisions 平板电视能效限定值及能效等级 |
China National Standards I |
English PDF |
GB 21455-2013 |
The mInimum allowable values of the energy efficiency and energy efficiency grades for variable speed room air conditioners 转速可控型房间空气调节器能效限定值及能效等级 |
China National Standards I |
English PDF |
GB 20052-2013 |
MInimum allowable values of energy efficiency and energy efficiency grades for three-phase distribution transformers 三相配电变压器能效限定值及能效等级 |
China National Standards I |
English PDF |
GB 19044-2013 |
MInimum allowable values of energy efficiency and the energy efficiency grades of self-ballasted fluorescent lamps for general lighting service 普通照明用自镇流荧光灯能效限定值及能效等级 |
China National Standards I |
English PDF |
GB 19043-2013 |
MInimum allowable values of energy efficiency and the energy efficiency grades of double-capped fluorescent lamps for general lighting service 普通照明用双端荧光灯能效限定值及能效等级 |
China National Standards I |
English PDF |
GB 12021.4-2013 |
The maxImum allowable values of the energy,water consumption and grades for household electric washing machines 电动洗衣机能效水效限定值及等级 |
China National Standards I |
English PDF |
GB 50898-2013 |
TechnIcal code for water mist fire extinguishing system 细水雾灭火系统技术规范 |
China National Standards I |
English PDF |
GB 50894-2013 |
Code for desIgn of environment protection for machinery industry 机械工业环境保护设计规范 |
China National Standards I |
English PDF |
Find out:54769Items | To Page of: First -Previous-Next -Last | [263] [264] [265] [266] [267] [268] [269] |