GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 16904.2-2006 |
CheckIng of rolling stock clearance for standard gauge railways - Part 2:clearance treadle 标准轨距铁路机车车辆限界检查 第2部分:限界规 |
China National Standards I |
English PDF |
GB/T 16904.1-2006 |
CheckIng of rolling stock clearance for standard gauge railways - Part 1:Methods for inspecting 标准轨距铁路机车车辆限界检查 第1部分:检查方法 |
China National Standards I |
English PDF |
GB/T 15846-2006 |
The door gasket for freIght container 集装箱门框密封条 |
China National Standards I |
English PDF |
GB/T 12816-2006 |
The lImiting value and measurement method for the interior noise in the railway passenger coach 铁道客车内部噪声限值及测量方法 |
China National Standards I |
English PDF |
GB/T 4201-2006 |
DescrIption, verification and evaluation of balancing machines 平衡机的描述检验与评定 |
China National Standards I |
English PDF |
GB/T 2624.4-2006 |
Measurement of fluId flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes 用安装在圆形截面管道中的差压装置测量满管流体流量 第4部分:文丘里管 |
China National Standards I |
English PDF |
GB/T 2624.3-2006 |
Measurement of fluId flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles 用安装在圆形截面管道中的差压装置测量满管流体流量 第3部分:喷嘴和文丘里喷嘴 |
China National Standards I |
English PDF |
GB/T 2624.2-2006 |
Measurement of fluId flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates 用安装在圆形截面管道中的差压装置测量满管流体流量 第2部分:孔板 |
China National Standards I |
English PDF |
GB/T 2624.1-2006 |
Measurement of fluId flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements 用安装在圆形截面管道中的差压装置测量满管流体流量 第1部分:一般原理和要求 |
China National Standards I |
English PDF |
GB/T 20733-2006 |
DIgital Still Cameras - Terminology 数码照相机 术语 |
China National Standards I |
English PDF |
GB/T 20732-2006 |
OptIcal fiber diameter analyser 纤维直径光学分析仪 |
China National Standards I |
English PDF |
GB/T 20731-2006 |
VerIfication of wheel balancing machines 车轮平衡机的检验 |
China National Standards I |
English PDF |
GB/T 20730.1-2006 |
Industrial-process control systems -Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating performance 工业过程控制系统用模拟输入两位或多位输出仪表 第1部分:性能评定方法 |
China National Standards I |
English PDF |
GB/T 20729-2006 |
Measurement of conductIve liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length 封闭管道中导电液体流量的测量 法兰安装电磁流量计 总长度 |
China National Standards I |
English PDF |
GB/T 20728-2006 |
Measurement of fluId flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters 封闭管道中流体流量的测量 科里奥利流量计的选型、安装和使用指南 |
China National Standards I |
English PDF |
GB/T 20727-2006 |
Measurement of fluId flow in closed conduits - Thermal mass flowmeters 封闭管道中流体流量的测量 热式质量流量计 |
China National Standards I |
English PDF |
GB/T 20723-2006 |
General specIfications of Arc welding robots 弧焊机器人 通用技术条件 |
China National Standards I |
English PDF |
GB/T 20722-2006 |
General specIfications of laser processing robots 激光加工机器人 通用技术条件 |
China National Standards I |
English PDF |
GB/T 20721-2006 |
General specIfications of automatic guided vehicles 自动导引车 通用技术条件 |
China National Standards I |
English PDF |
GB/T 20720.2-2006 |
EnterprIse-control system integration - Part 2: Object model attributes 企业控制系统集成 第2部分:对象模型属性 |
China National Standards I |
English PDF |
GB/T 20720.1-2006 |
EnterprIse-control system integration - Part 1: Models and terminology 企业控制系统集成 第1部分:模型和术语 |
China National Standards I |
English PDF |
GB/T 20719.1-2006 |
Industrial automation system and integration - Process specification language - Part 1: Overview and basic principles 工业自动化系统与集成 过程规范语言 第1部分:概述与基本原理 |
China National Standards I |
English PDF |
GB/T 19903.10-2006 |
Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers - Part 10: General process data 工业自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第10部分:通用工艺数据 |
China National Standards I |
English PDF |
GB/T 19902.3-2006 |
Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 3: Interface services,protocols and capability templates 工业自动化系统与集成 制造软件互操作性能力建规 第3部分:接口服务、协议及能力模板 |
China National Standards I |
English PDF |
GB/T 19659.4-2006 |
Industrial automation systems and integration - Open systems application integration framework - Part 4: Reference description for Ethernet-based control systems 工业自动化系统与集成 开放系统应用集成框架 第4部分:基于以太网控制系统的参考描述 |
China National Standards I |
English PDF |
GB/T 19659.3-2006 |
Industrial automation systems and integration - Open systems application integration framework - Part 3: Reference description for IEC 61158-based control systems 工业自动化系统与集成 开放系统应用集成框架 第3部分:基于IEC 61158控制系统的参考描述 |
China National Standards I |
English PDF |
GB/T 19659.2-2006 |
Industrial automation systems and integration - Open systems application integration framework - Part 2: Reference description for ISO 11898-based control systems 工业自动化系统与集成 开放系统应用集成框架 第2部分:基于ISO 11898的控制系统的参考描述 |
China National Standards I |
English PDF |
GB/T 1185-2006 |
Surface Imperfections of optical elements 光学零件表面疵病 |
China National Standards I |
English PDF |
GB 20665-2006 |
MInimum allowable values of energy efficiency and energy efficiency grades for domestic gas instantaneous water heater and gas fired heating and hot water combi-boilers 家用燃气快速热水器和燃气采暖热水炉能效限定值及能效等级 |
China National Standards I |
English PDF |
GB/T 7293-2006 |
Feed addItive - Vitamin E powder 饲料添加剂 维生素E粉 |
China National Standards I |
English PDF |
GB/T 20715-2006 |
Calf mIlk replacer 犊牛代乳粉 |
China National Standards I |
English PDF |
GB/T 13093-2006 |
ExamInation of bacterial count in feeds 饲料中细菌总数的测定 |
China National Standards I |
English PDF |
GB/T 13090-2006 |
DetermInation of HCH and DDT in feeds 饲料中六六六、滴滴涕的测定 |
China National Standards I |
English PDF |
GB/T 13081-2006 |
DetermInation of mercury in feeds 饲料中汞的测定 |
China National Standards I |
English PDF |
GB/T 13079-2006 |
DetermInation of total arsenic in feeds 饲料中总砷的测定 |
China National Standards I |
English PDF |
GB/T 15038-2006 |
AnalytIcal methods of wine and fruit wine 葡萄酒、果酒通用分析方法 |
China National Standards I |
English PDF |
GB 15037-2006 |
WInes 葡萄酒 |
China National Standards I |
English PDF |
GB/T 20710-2006 |
Product of geographIcal indication - Dalian abalone 地理标志产品 大连鲍鱼 |
China National Standards I |
English PDF |
GB/T 20709-2006 |
Product of geographIcal indication - Dalian sea cucumber 地理标志产品 大连海参 |
China National Standards I |
English PDF |
GB 50374-2006 |
Code of constructIon and acceptance for communication conduit engineering 通信管道工程施工及验收规范 |
China National Standards I |
English PDF |
GB 50373-2006 |
DesIgn code for communication conduit and passage engineering 通信管道与通道工程设计规范 |
China National Standards I |
English PDF |
GB 50135-2006 |
Code for desIgn of high-rising structures 高耸结构设计规范 |
China National Standards I |
English PDF |
GB/T 20655-2006 |
ProtectIve clothing - Mechanical properties - Determination of the resistance to puncture 防护服装 机械性能 抗刺穿性的测定 |
China National Standards I |
English PDF |
GB/T 20654-2006 |
ProtectIve clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials 防护服装 机械性能 材料抗刺穿及动态撕裂性的试验方法 |
China National Standards I |
English PDF |
GB 20653-2006 |
HIgh-visibility warning clothing for professional use 职业用高可视性警示服 |
China National Standards I |
English PDF |
GB/T 20670-2006 |
UnIfied screw threads - General plan 统一螺纹 直径与牙数系列 |
China National Standards I |
English PDF |
GB/T 20669-2006 |
UnIfied screw threads - Profiles 统一螺纹 牙型 |
China National Standards I |
English PDF |
GB/T 20668-2006 |
UnIfied screw threads - Basic dimensions 统一螺纹 基本尺寸 |
China National Standards I |
English PDF |
GB/T 20667-2006 |
UnIfied screw threads - Limits of sizes 统一螺纹 极限尺寸 |
China National Standards I |
English PDF |
GB/T 20666-2006 |
UnIfied screw threads - Tolerances 统一螺纹 公差 |
China National Standards I |
English PDF |
GB/T 4170-2006 |
SpecIfication of components of injection moulds for plastics 塑料注射模零件技术条件 |
China National Standards I |
English PDF |
GB/T 4169.9-2006 |
Components of Injection moulds for plastics - Part 9: Stop pin 塑料注射模零件 第9部分:限位钉 |
China National Standards I |
English PDF |
GB/T 4169.8-2006 |
Components of Injection moulds for plastics ― Part 8:Mould plate 塑料注射模零件 第8部分:模板 |
China National Standards I |
English PDF |
GB/T 4169.7-2006 |
Components of Injection moulds for plastics - Part 7: Ejector plate 塑料注射模零件 第7部分:推板 |
China National Standards I |
English PDF |
GB/T 4169.6-2006 |
Components of Injection moulds for plastics - Part 6: Spacer block 塑料注射模零件 第6部分:垫块 |
China National Standards I |
English PDF |
GB/T 4169.5-2006 |
Components of Injection moulds for plastics - Part 5: Shouldered guide pillar 塑料注射模零件 第5部分:带肩导柱 |
China National Standards I |
English PDF |
GB/T 4169.4-2006 |
Components of Injection moulds for plastics - Part 4: Headed guide pillar 塑料注射模零件 第4部分:带头导柱 |
China National Standards I |
English PDF |
GB/T 4169.3-2006 |
Components of Injection moulds for plastics - Part 3: Headed guide bush 塑料注射模零件 第3部分:带头导套 |
China National Standards I |
English PDF |
GB/T 4169.23-2006 |
Components of Injection moulds for plastics - Part 23: Rectangular mould opening delayer 塑料注射模零件 第23部分:矩形拉模扣 |
China National Standards I |
English PDF |
GB/T 4169.22-2006 |
Components of Injection moulds for plastics - Part 22: Round mould opening delayer 塑料注射模零件 第22部分: 圆形拉模扣 |
China National Standards I |
English PDF |
GB/T 4169.2-2006 |
Components of Injection moulds for plastics - Part 2: Straight guide bush 塑料注射模零件 第2部分:直导套 |
China National Standards I |
English PDF |
GB/T 4169.21-2006 |
Components of Injection moulds for plastics - Part 21: Rectangular locating element 塑料注射模零件 第21部分:矩形定位元件 |
China National Standards I |
English PDF |
GB/T 4169.20-2006 |
Components of Injection moulds for plastics - Part 20: Limit pin 塑料注射模零件 第20部分:拉杆导柱 |
China National Standards I |
English PDF |
GB/T 4169.19-2006 |
Components of Injection moulds for plastics - Part 19: Sprue bush 塑料注射模零件 第19部分:浇口套 |
China National Standards I |
English PDF |
GB/T 4169.18-2006 |
Components of Injection moulds for plastics - Part 18: Locating ring 塑料注射模零件 第18部分:定位圈 |
China National Standards I |
English PDF |
GB/T 4169.17-2006 |
Components of Injection moulds for plastics - Part 17: Ejector sleeve 塑料注射模零件 第17部分:推管 |
China National Standards I |
English PDF |
GB/T 4169.16-2006 |
Components of Injection moulds for plastics - Part 16: Shouldered ejector pin 塑料注射模零件 第16部分: 带肩推杆 |
China National Standards I |
English PDF |
GB/T 4169.15-2006 |
Components of Injection moulds for plastics - Part 15: Flat ejector pin 塑料注射模零件 第15部分: 扁推杆 |
China National Standards I |
English PDF |
GB/T 4169.14-2006 |
Components of Injection moulds for plastics - Part 14: Ejector guide pillar 塑料注射模零件 第14部分:推板导柱 |
China National Standards I |
English PDF |
GB/T 4169.13-2006 |
Components of Injection moulds for plastics ― Part 13: Return pin 塑料注射模零件 第13部分:复位杆 |
China National Standards I |
English PDF |
GB/T 4169.12-2006 |
Components of Injection moulds for plastics - Part 12: Ejector guide bush 塑料注射模零件 第12部分:推板导套 |
China National Standards I |
English PDF |
GB/T 4169.1-2006 |
Components of Injection moulds for plastics - Part 1: Ejector pin 塑料注射模零件 第1部分:推杆 |
China National Standards I |
English PDF |
GB/T 4169.11-2006 |
Components of Injection moulds for plastics - Part 11: Round locating element 塑料注射模零件 第11部分:圆形定位元件 |
China National Standards I |
English PDF |
GB/T 4169.10-2006 |
Components of Injection moulds for plastics - Part 10: Support pillar 塑料注射模零件 第10部分:支承柱 |
China National Standards I |
English PDF |
GB/T 12556-2006 |
SpecIfication of injection mould bases for plastics 塑料注射模模架技术条件 |
China National Standards I |
English PDF |
GB/T 12555-2006 |
Injection mould bases for plastics 塑料注射模模架 |
China National Standards I |
English PDF |
GB/T 12554-2006 |
SpecIfiication of injection moulds for plastics 塑料注射模技术条件 |
China National Standards I |
English PDF |
GB 3796-2006 |
General rule for packIng of pesticides 农药包装通则 |
China National Standards I |
English PDF |
GB 20813-2006 |
GuIdeline on labels for pesticide products 农药产品标签通则 |
China National Standards I |
English PDF |
GB/T 20671.9-2006 |
ClassIfication system and test methods for nonmetallic gasket materials - Part 9: Standard test method for binder durability of cork composition gasket materials 非金属垫片材料分类体系及试验方法 第9部分: 软木垫片材料胶结物耐久性试验方法 |
China National Standards I |
English PDF |
GB/T 20671.8-2006 |
ClassIfication system and test methods for nonmetallic gasket materials - Part 8: Standard test method for flexibility of non-metallic gasket materials 非金属垫片材料分类体系及试验方法 第8部分: 非金属垫片材料柔软性试验方法 |
China National Standards I |
English PDF |
GB/T 20671.7-2006 |
ClassIfication system and test methods for nonmetallic gasket materials - Part 7: Standard test methods for tension testing of nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第7部分: 非金属垫片材料拉伸强度试验方法 |
China National Standards I |
English PDF |
GB/T 20671.6-2006 |
ClassIfication system and test methods for nonmetallic gasket materials - Part 6: Standard test method for adhesion of gasket materials to metal surfaces 非金属垫片材料分类体系及试验方法 第6部分: 垫片材料与金属表面粘附性试验方法 |
China National Standards I |
English PDF |
GB/T 20671.5-2006 |
ClassIfication system and test methods for nonmetallic gasket materials - Part 5: Standard test method for creep relaxtion of gasket materials 非金属垫片材料分类体系及试验方法 第5部分:垫片材料蠕变松驰率试验方法 |
China National Standards I |
English PDF |
GB/T 20671.4-2006 |
ClassIfication system and test methods for nonmetallic gasket materials - Part 4: Standard test method for sealability of gasket materials 非金属垫片材料分类体系及试验方法 第4部分:垫片材料密封性试验方法 |
China National Standards I |
English PDF |
GB/T 20671.3-2006 |
ClassIfication system and test methods for nonmetallic gasket materials - Part 3: Standard test method for fluid resistance of gasket materials 非金属垫片材料分类体系及试验方法 第3部分: 垫片材料耐液性试验方法 |
China National Standards I |
English PDF |
GB/T 20671.2-2006 |
ClassIfication system and test methods for nonmetallic gasket materials - Part 2: Standard test method for compressibility and recovery of gasket materials 非金属垫片材料分类体系及试验方法 第2部分: 垫片材料压缩率回弹率试验方法 |
China National Standards I |
English PDF |
GB/T 20671.1-2006 |
ClassIfication system and test methods for nonmetallic gasket materials - Part 1: Standard classification system for nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第1部分: 非金属垫片材料分类体系 |
China National Standards I |
English PDF |
GB/T 20671.11-2006 |
ClassIfication system and test methods for nonmetallic gasket materials - Part 11: Standard practice for determining resistance of synthetic polymeric materials to fungi 非金属垫片材料分类体系及试验方法 第11部分: 合成聚合材料抗霉性测定方法 |
China National Standards I |
English PDF |
GB/T 20671.10-2006 |
ClassIfication system and test methods for nonmetallic gasket materials - Part 10: Standard practice for evaluating thermal conductivity of gasket materials 非金属垫片材料分类体系及试验方法 第10部分: 垫片材料导热系数测定方法 |
China National Standards I |
English PDF |
GB/T 9870.1-2006 |
Rubber, vulcanIzed or thermoplastic - Determination of dynamic properties - Part 1: General guidance 硫化橡胶或热塑性橡胶动态性能的测定 第1部分:通则 |
China National Standards I |
English PDF |
GB/T 20708-2006 |
LImit and determination of parts of harmful substances in textile auxiliaries 纺织助剂产品中部分有害物质的限量及测定 |
China National Standards I |
English PDF |
GB/T 13253-2006 |
Rubber - DetermInation of manganese content by atomic absorption spectrometry 橡胶中锰含量的测定 原子吸收光谱法 |
China National Standards I |
English PDF |
GB 20664-2006 |
LImitation concentration of natural radioactivity in non-ferrous metal ores and concentrates products 有色金属矿产品的天然放射性限值 |
China National Standards I |
English PDF |
GB 20811-2006 |
Waste paper recycled requIrements 废纸再利用技术要求 |
China National Standards I |
English PDF |
GB 20810-2006 |
Bathroom tIssue (including bathroom tissue base paper) 卫生纸(含卫生纸原纸) |
China National Standards I |
English PDF |
GB/Z 20650-2006 |
MIcrographics - Legal admissibility of microforms 缩微摄影技术 缩微品的法律认可性 |
China National Standards I |
English PDF |
GB/Z 20649-2006 |
ElectronIc imaging - Recommendations for the management of electronic recording systems for the recording of documents that may be required as evidence, on WORM optical disk 电子成像 在WORM光盘上记录证据文件的电子记录系统的推荐管理方法 |
China National Standards I |
English PDF |
GB/Z 20648-2006 |
ElectronIc imaging - Recommendations for the expungement of information recorded on write-once optical media 电子成像 擦除记录在一次写入光学介质上的信息的推荐方法 |
China National Standards I |
English PDF |
GB/T 7713.1-2006 |
PresentatIon of theses and dissertations 学位论文编写规则 |
China National Standards I |
English PDF |
Find out:54769Items | To Page of: First -Previous-Next -Last | [438] [439] [440] [441] [442] [443] [444] |