Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 32580.301-2016 |
Railway applications—Fixed installations—Particular requirements for a.c.swITchgear—Part 3-1: Measurement, control and protection devices for specific use in a.c. traction system— Application guide 轨道交通 地面装置 交流开关设备的特殊要求 第3-1部分：交流牵引系统专用测量、控制和保护装置 应用指南 |
China National Standards IT |
 English PDF |
| GB/T 32580.2-2016 |
Railway applications—Fixed installations—Particular requirements for a.c. swITchgear—Part 2: Single-phase disconnectors，earthing switches and switches with Un above 1KV 轨道交通 地面装置 交流开关设备的特殊要求 第2部分：Un大于1kV的单相隔离开关、接地开关和负荷开关 |
China National Standards IT |
English PDF |
| GB/T 32580.1-2016 |
Railway applications—Fixed installations—Particular requirements for a.c.swITchgear—Part 1: Single-phase circuit-breakers with Un above 1 kV 轨道交通 地面装置 交流开关设备的特殊要求 第1部分：Un大于1kV的单相断路器 |
China National Standards IT |
English PDF |
| GB/T 32577-2016 |
Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway environment wITh respect to human exposure 轨道交通有人环境中电子和电气设备产生的磁场强度测量方法 |
China National Standards IT |
English PDF |
| GB/T 32483.1-2016 |
Energy performance of lamp controlgear—Part 1: Controlgear for fluorescent lamps—Method of measurement to determine the total input power of controlgear circuITs and the efficiency of the controlgear 灯控制装置的效率要求 第1部分：荧光灯控制装置 控制装置线路总输入功率和控制装置效率的测量方法 |
China National Standards IT |
English PDF |
| GB/T 31960.9-2016 |
Technical specification of power energy efficiency monIToring system—Part 9: System testing specification 电力能效监测系统技术规范 第9部分：系统检验规范 |
China National Standards IT |
English PDF |
| GB/T 31960.11-2016 |
Technical specification of power energy efficiency monIToring system—Part 11: Test specification of power energy efficiency information collection and exchange terminal 电力能效监测系统技术规范 第11部分：电力能效信息集中与交互终端检验规范 |
China National Standards IT |
English PDF |
| GB/T 31960.10-2016 |
Technical specification of power energy efficiency monIToring system—Part 10: Test specification of power energy efficiency monitor terminal 电力能效监测系统技术规范 第10部分：电力能效监测终端检验规范 |
China National Standards IT |
English PDF |
| GB/T 29265.304-2016 |
Information technology—Information device intelligent grouping and resource sharing—Part 304: DigITal media content protection 信息技术 信息设备资源共享协同服务 第304部分：数字媒体内容保护 |
China National Standards IT |
English PDF |
| GB/T 31596.6-2016 |
Social insurance terminology—Part 6: MaternITy insurance 社会保险术语 第6部分：生育保险 |
China National Standards IT |
English PDF |
| GB/T 2775-2016 |
CapacITors and resistors for use in electronic equipment—Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components 电子设备用电容器和电阻器 轴端、轴套和单孔轴套安装及轴控电子元件的优选尺寸 |
China National Standards IT |
English PDF |
| GB/T 20144-2016 |
Barrel thread for lampholders wITh shade holder ring 带灯罩环的灯座用筒形螺纹 |
China National Standards IT |
English PDF |
| GB/T 19483-2016 |
Requirement and measurement methods of electromagnetic compatibilITy for cordless telephone 无绳电话的电磁兼容性要求及测量方法 |
China National Standards IT |
English PDF |
| GB/T 19287-2016 |
The general immunITy requirement for telecommunication equipment 电信设备的抗扰度通用要求 |
China National Standards IT |
English PDF |
| GB/T 19161-2016 |
Packing containers—ComposITe intermediate bulk container 包装容器 复合式中型散装容器 |
China National Standards IT |
English PDF |
| GB/T 18031-2016 |
Information technology—Generic specification for Chinese character input wITh digital keyboard 信息技术 数字键盘汉字输入通用要求 |
China National Standards IT |
English PDF |
| GB/T 17421.6-2016 |
Test code for machine tools—Part 6: Determination of posITioning accuracy on body and face diagonals(Diagonal displacement tests) 机床检验通则 第6部分：体和面对角线位置精度的确定（对角线位移检验） |
China National Standards IT |
English PDF |
| GB/T 17421.2-2016 |
Test code for machine tools—Partie 2: Determination of accuracy and repeatabilITy positioning numerically controlled axes 机床检验通则 第2部分：数控轴线的定位精度和重复定位精度的确定 |
China National Standards IT |
English PDF |
| GB/T 16935.3-2016 |
Insulation coordination for equipment wIThin low-voltage systems—Part 3: Use of coating, potting or moulding for protection against pollution 低压系统内设备的绝缘配合 第3部分：利用涂层、罐封和模压进行防污保护 |
China National Standards IT |
English PDF |
| GB/T 15843.3-2016 |
Information technology—SecurITy techniques—Entity authentication—Part 3: Mechanisms using digital signature techniques 信息技术 安全技术 实体鉴别 第3部分：采用数字签名技术的机制 |
China National Standards IT |
English PDF |
| GB/T 14048.8-2016 |
Low-voltage swITchgear and controlgear—Part 7-2: Ancillary equipment—Protective conductor terminal blocks for copper conductors 低压开关设备和控制设备 第7-2部分：辅助器件 铜导体的保护导体接线端子排 |
China National Standards IT |
English PDF |
| GB/T 14048.11-2016 |
Low-voltage swITchgear and controlgear—Part 6-1: Multiple function equipment—Transfer switching equipment 低压开关设备和控制设备 第6-1部分：多功能电器 转换开关电器 |
China National Standards IT |
English PDF |
| GB/T 10963.3-2016 |
CircuIT-breakers for overcurrent protection for household and similar installation—Part 3: Circuit-breakers for d.c. operation 家用及类似场所用过电流保护断路器 第3部分：用于直流的断路器 |
China National Standards IT |
English PDF |
| GB/T 31864-2016 |
Index for credIT evaluation of professional manager 职业经理人信用评价指标 |
China National Standards IT |
English PDF |
| GB/T 30269.601-2016 |
Information technology—Sensor network—Part 601: Information securITy general technical specifications 信息技术 传感器网络 第601部分：信息安全：通用技术规范 |
China National Standards IT |
English PDF |
| GB/T 30217.2-2016 |
Petroleum and natural gas industries—Drilling and production equipment—Part 2: Deepwater drilling riser analysis methodologies, operations and integrITy 石油天然气工业 钻井和采油设备 第2部分：深水钻井隔水管的分析方法、操作和完整性 |
China National Standards IT |
English PDF |
| GB/T 27020-2016 |
ConformITy assessment—Requirements for the operation of various types of bodies performing inspection 合格评定 各类检验机构的运作要求 |
China National Standards IT |
English PDF |
| GB/T 16432-2016 |
Assistive products for persons wITh disability—Classification and terminology 康复辅助器具 分类和术语 |
China National Standards IT |
English PDF |
| GB 51173-2016 |
Code for design of dewatering and draining in open pIT mine of coal industry 煤炭工业露天矿疏干排水设计规范 |
China National Standards IT |
English PDF |
| GB/T 51163-2016 |
Technical code for delimITation of urban green line 城市绿线划定技术规范 |
China National Standards IT |
English PDF |
| GB 51151-2016 |
Technical code for engineering of public securITy and protection system of urban rail transit 城市轨道交通公共安全防范系统工程技术规范 |
China National Standards IT |
English PDF |
| GB/T 32571-2016 |
Corrosion of metals and alloys—Corrosion test for intergranular corrosion susceptibilITy of high—Cr ferritic stainless steels 金属和合金的腐蚀 高铬铁素体不锈钢晶间腐蚀试验方法 |
China National Standards IT |
English PDF |
| GB/T 32551-2016 |
Fluorspar powder in bulk—Determination of transportable moisture limITs—Flow-table method 散装萤石粉 适运水分限量的测定 流盘实验法 |
China National Standards IT |
English PDF |
| GB/T 32498-2016 |
Metal matrix composITes—Tensile testing—Method of test at ambient temperature 金属基复合材料 拉伸试验 室温试验方法 |
China National Standards IT |
English PDF |
| GB/T 32497-2016 |
Test method of ballistic resistance against fragment simulating projectiles for fiber-reinforced composITes—V50 method 纤维增强复合材料抗破片模拟弹性能试验方法 V50法 |
China National Standards IT |
English PDF |
| GB/T 32496-2016 |
Test method for volume fraction of reinforcement in metal matrix composITes—Image analysis method 金属基复合材料增强体体积含量试验方法 图像分析法 |
China National Standards IT |
English PDF |
| GB/T 32493-2016 |
Test method of ballistic resistance for fibre reinforced composITes—Specific absorbed energy by perforation method 纤维增强复合材料抗弹性能试验方法 贯穿比吸能法 |
China National Standards IT |
English PDF |
| GB/T 32491-2016 |
Test method for long-Term hydrostatic pressure of glass fiber reinforced thermosetting resin pipe and fITtings 玻璃纤维增强热固性树脂管及管件长期静水压试验方法 |
China National Standards IT |
English PDF |
| GB/T 32488-2016 |
Ductile iron pipes and fITtings——Seal coats for cement mortar linings 球墨铸铁管和管件 水泥砂浆内衬密封涂层 |
China National Standards IT |
English PDF |
| GB/T 6730.73-2016 |
Iron ores—Determination of total iron content—EDTA photometric tITration method 铁矿石 全铁含量的测定 EDTA光度滴定法 |
China National Standards IT |
English PDF |
| GB/T 32550-2016 |
Corrosion of metals and alloys—Determination of the crITical pitting temperature under potentiostatic control 金属和合金的腐蚀 恒电位控制下的临界点蚀温度测定 |
China National Standards IT |
English PDF |
| GB/T 32549-2016 |
Fluorspar—Experimental methods for evaluation of qualITy variation 萤石 评价品质波动的试验方法 |
China National Standards IT |
English PDF |
| GB/T 17897-2016 |
Corrosion of metals and alloys—Corrosion test for pITting corrosion resistance of stainless steels in the ferric chloride solution 金属和合金的腐蚀 不锈钢三氯化铁点腐蚀试验方法 |
China National Standards IT |
English PDF |
| GB/T 32561.3-2016 |
Measuring method for chalcogenide infrared optical glass—Part 3: ImpurITy 红外光学硫系玻璃测试方法 第3部分：杂质 |
China National Standards IT |
English PDF |
| GB/T 32561.1-2016 |
Measuring method for chalcogenide infrared optical glass—Part 1: HomogeneITy 红外光学硫系玻璃测试方法 第1部分：均匀性 |
China National Standards IT |
English PDF |
| GB/Z 32519.3-2016 |
1000MW Class Hydraulic-generator—Part 3: QualITy Inspection Standards For Installation 1000MW级水轮发电机 第3部分：安装质量检测导则 |
China National Standards IT |
English PDF |
| GB/Z 32513-2016 |
General rules of reliabilITy for low voltage apparatus 低压电器可靠性通则 |
China National Standards IT |
English PDF |
| GB/Z 18509-2016 |
Electromagnetic compatibilITy—Guide to the drafting of electromagnetic compatibility standards 电磁兼容 电磁兼容标准起草导则 |
China National Standards IT |
English PDF |
| GB/Z 16935.6-2016 |
Insulation coordination for equipment wIThin low-voltage systems—Part 2-2: Interface considerations—Application guide 低压系统内设备的绝缘配合 第2-2部分：交界面考虑 应用指南 |
China National Standards IT |
English PDF |
| GB/T 4854.9-2016 |
Acoustics—Reference zero for the calibration of audiometric equipment—Part 9: Preferred test condITions for the determination of reference hearing threshold levels 声学 校准测听设备的基准零级 第9部分：确定基准听阈级的优选测试条件 |
China National Standards IT |
English PDF |
| GB/T 3667.2-2016 |
AC motor capacITors—Part 2：Motor start capacitors 交流电动机电容器 第2部分：电动机起动电容器 |
China National Standards IT |
English PDF |
| GB/T 3667.1-2016 |
AC motor capacITors—Part 1: General—Performance, testing and rating—Safety requirements—Guide for installation and operation 交流电动机电容器 第1部分：总则 性能、试验和额定值 安全要求 安装和运行导则 |
China National Standards IT |
English PDF |
| GB/T 32620.1-2016 |
Lead-acid batteries used for electric road vehicles—Part 1: Technical condITion 电动道路车辆用铅酸蓄电池 第1部分：技术条件 |
China National Standards IT |
English PDF |
| GB/T 32558-2016 |
Reduction sleeves wITh 7/24 external and Morse internal taper 带7:24外圆锥和莫氏内圆锥的缩柄套 |
China National Standards IT |
English PDF |
| GB/T 32557.2-2016 |
Polygonal taper interface wITh flange contact surface—Part 2: Dimensions and designation of receivers 带有法兰接触面的多棱锥接口 第2部分：安装孔尺寸和标记 |
China National Standards IT |
English PDF |
| GB/T 32557.1-2016 |
Polygonal taper interface wITh flange contact surface—Part 1: Dimensions and designation of shanks 带有法兰接触面的多棱锥接口 第1部分：柄部尺寸和标记 |
China National Standards IT |
English PDF |
| GB/T 32556.3-2016 |
Cutter arbors wITh tenon drive—Part 3: Dimensions of hollow taper interface with flange contact surface 带端键传动的铣刀杆 第3部分：带法兰接触面的空心锥柄的铣刀杆尺寸 |
China National Standards IT |
English PDF |
| GB/T 32556.2-2016 |
Cutter arbors wITh tenon drive—Part 2: Dimensions of 7:24 taper 带端键传动的铣刀杆 第2部分：带7:24锥柄的铣刀杆尺寸 |
China National Standards IT |
English PDF |
| GB/T 32556.1-2016 |
Cutter arbors wITh tenon drive—Part 1: Dimension of Morse taper 带端键传动的铣刀杆 第1部分：带莫氏锥柄的铣刀杆尺寸 |
China National Standards IT |
English PDF |
| GB/T 32541-2016 |
QualITy control systems for heat treatment 热处理质量控制体系 |
China National Standards IT |
English PDF |
| GB/T 32540-2016 |
Technical requirements for accuracy-controlled gas nITriding heat treatment 精密气体渗氮热处理技术要求 |
China National Standards IT |
English PDF |
| GB/T 32538.2-2016 |
Agricultural vehicles—Mechanical connections on towed vehicles—Part 2: Coupling ring 40 wITh socket 农业车辆 被牵引车辆的机械连接装置 第2部分：带座孔的40连接环 |
China National Standards IT |
English PDF |
| GB/T 32538.1-2016 |
Agricultural vehicles—Mechanical connections on towed vehicles—Part 1: Dimensions for hITch rings of 50/30 mm cross section 农业车辆 被牵引车辆的机械连接装置 第1部分：50mm/30mm横截面的挂接环尺寸 |
China National Standards IT |
English PDF |
| GB/T 32531-2016 |
Printing machinery—Violet laster digITal direct plate setter 印刷机械 紫激光型数字直接制版机 |
China National Standards IT |
English PDF |
| GB/T 32530-2016 |
Machinery for forestry—Saw chain shot guarding systems—Test method and performance crITeria 林业机械 锯链甩射防护系统 试验方法和性能要求 |
China National Standards IT |
English PDF |
| GB/T 32527-2016 |
Design specification of space materials science experimental facilITy—Multifunctional high temperature furnace 空间材料科学实验装置 多功能高温炉设计规范 |
China National Standards IT |
English PDF |
| GB/T 32524.2-2016 |
Acoustics—Determination of sound power level and directivITy character of power capacitor using sound pressure—Part 2: Engineering methods for an essentially free field over a reflecting plane 声学 声压法测定电力电容器单元的声功率级和指向特性 第2部分：反射面上方近似自由场的工程法 |
China National Standards IT |
English PDF |
| GB/T 32524.1-2016 |
Acoustics—Determination of sound power level and directivITy character of power capacitor unit using sound pressure—Part 1: Precision method for hemi-anechoic rooms 声学 声压法测定电力电容器单元的声功率级和指向特性 第1部分：半消声室精密法 |
China National Standards IT |
English PDF |
| GB/T 32520-2016 |
Metal-oxide surge arresters wITh external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV 交流1 kV以上架空输电和配电线路用带外串联间隙金属氧化物避雷器（EGLA） |
China National Standards IT |
English PDF |
| GB/T 32514.2-2016 |
Resistance welding—Welding current measurement for resistance welding—Part 2: Welding current meter wITh current sensing coil 电阻焊 焊接电流的测量 第2部分：带电流感应线圈的焊接电流测量仪 |
China National Standards IT |
English PDF |
| GB/T 32508-2016 |
QuantITative determination of corrosive sulfur (dibenzyl disulfide , DBDS) in insulating liquids 绝缘油中腐蚀性硫（二苄基二硫醚）定量检测方法 |
China National Standards IT |
English PDF |
| GB/T 32507-2016 |
Power qualITy—Terms 电能质量 术语 |
China National Standards IT |
English PDF |
| GB/T 32506-2016 |
Code for operation and maintenance for excITation system of pumped-storage unit 抽水蓄能机组励磁系统运行检修规程 |
China National Standards IT |
English PDF |
| GB/T 32502-2016 |
Overhead electrical stranded conductors composITe core supported/reinforced 复合材料芯架空导线 |
China National Standards IT |
English PDF |
| GB/T 32499-2016 |
Connecting devices—Devices for the connection of aluminium conductors in clamping unITs of any material and copper conductors in aluminium bodied clamping units 连接器件 任何材料的夹紧件用铝线的连接器件及铝基夹紧件用铜线的连接器件 |
China National Standards IT |
English PDF |
| GB/T 32487-2016 |
General technical requirements for plastic furnITure 塑料家具通用技术条件 |
China National Standards IT |
English PDF |
| GB/T 32484-2016 |
Watch-cases and accessories—Vapour phase deposITed coatings 表壳体及其附件 气相沉积镀层 |
China National Standards IT |
English PDF |
| GB/T 32482.1-2016 |
LED—Binning—Part 1: General requirements and whITe colour grid LED 分选 第1部分：一般要求和白光栅格 |
China National Standards IT |
English PDF |
| GB/T 32478-2016 |
Household and similar electrical appliances method of measuring performance —Assessment of repeatabilITy and reproducibility 家用和类似用途电器性能测试方法 重复性和再现性评价 |
China National Standards IT |
English PDF |
| GB/T 32476-2016 |
Rubber and plastic hoses and hose assemblies wITh internal vapour recovery for measured fuel dispensing system 具有油气回收功能的计量分配燃油用橡胶和塑料软管及软管组合件 |
China National Standards IT |
English PDF |
| GB/T 2900.20-2016 |
Electrotechnical terminology High-voltage swITchgear and controlgear 电工术语 高压开关设备和控制设备 |
China National Standards IT |
English PDF |
| GB/T 22715-2016 |
Impulse voltage wIThstand levels of form-wound stator coils for rotating a.c. machines 旋转交流电机定子成型线圈耐冲击电压水平 |
China National Standards IT |
English PDF |
| GB/T 20448.2-2016 |
Self-propelled machinery for forestry—Laboratory tests and performance requirements for roll-over protective structures—Part 2: Machines having a rotating platform wITh a cab and boom on the platform 自行式林业机械 滚翻保护结构实验室试验和性能要求 第2部分：回转平台上安装驾驶室和起重臂的机械 |
China National Standards IT |
English PDF |
| GB/T 20140-2016 |
Measurement method and evaluation crITeria of dynamic characteristic and vibration on stator end windings of cylindrical synchronous generators 隐极同步发电机定子绕组端部动态特性和振动测量方法及评定 |
China National Standards IT |
English PDF |
| GB/T 20041.25-2016 |
ConduIT systems for cable management— Part 25: Particular requirements for conduit fixing devices 电缆管理用导管系统 第25部分：导管固定装置的特殊要求 |
China National Standards IT |
English PDF |
| GB/T 19749.1-2016 |
Coupling capacITors and capacitor dividers—Part 1: General rules 耦合电容器和电容分压器 第1部分：总则 |
China National Standards IT |
English PDF |
| GB/T 19436.4-2016 |
Electrical safety of machinery—Electro-sensITive protective equipment—Part 4: Particular requirements for equipment using vision based protective devices (VBPD) 机械电气安全 电敏保护设备 第4部分：使用视觉保护装置（VBPD）设备的特殊要求 |
China National Standards IT |
English PDF |
| GB/T 16896.2-2016 |
Instruments and software used for measurement in high-voltage and high-current tests—Part 2: Requirements for software for tests wITh impulse voltages and currents 高电压和大电流试验测量用仪器和软件 第2部分：对冲击电压和冲击电流试验用软件的要求 |
China National Standards IT |
English PDF |
| GB/T 16461-2016 |
Tool-life testing wITh single-point turning tools 单刃车削刀具寿命试验 |
China National Standards IT |
English PDF |
| GB/T 16296.2-2016 |
Acoustics—Audiometric test methods—Part 2: Sound-field audiometry wITh pure-tone and narrow-band test signals 声学 测听方法 第2部分：用纯音及窄带测试信号的声场测听 |
China National Standards IT |
English PDF |
| GB/T 14048.7-2016 |
Low-voltage swITchgear and controlgear—Part 7-1：Ancillary equipment—Terminal blocks for copper conductors 低压开关设备和控制设备 第7-1部分：辅助器件 铜导体的接线端子排 |
China National Standards IT |
English PDF |
| GB/T 14048.18-2016 |
Low-voltage swITchgear and controlgear—Part 7-3: Ancillary equipment—Safety requirements for fuse terminal blocks 低压开关设备和控制设备 第7-3部分：辅助器件 熔断器接线端子排的安全要求 |
China National Standards IT |
English PDF |
| GB/T 12145-2016 |
QualITy criterion of water and steam for power plant and steam-generating equipment 火力发电机组及蒸汽动力设备水汽质量 |
China National Standards IT |
English PDF |
| GB/T 12009.5-2016 |
Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 5: Determination of acidITy 塑料 聚氨酯生产用芳香族异氰酸酯 第5部分：酸度的测定 |
China National Standards IT |
English PDF |
| GB/T 10233-2016 |
Basic testing method for low-voltage swITchgear and controlgear assemblies 低压成套开关设备和电控设备基本试验方法 |
China National Standards IT |
English PDF |
| GB/T 889.2-2016 |
Prevailing torque type hexagon nuts (wITh non-metallic insert), style 1—Fine pitch thread 1型非金属嵌件六角锁紧螺母 细牙 |
China National Standards IT |
English PDF |
| GB/T 823-2016 |
Small pan head screws wITh cross recess 十字槽小盘头螺钉 |
China National Standards IT |
English PDF |
| GB/T 822-2016 |
Cheese head screws wITh cross recess 十字槽圆柱头螺钉 |
China National Standards IT |
English PDF |
| GB/T 819.2-2016 |
Countersunk flat head screws wITh cross recess—Part 2: Property class 8.8, stainless steel screws and non-ferrous metal screws 十字槽沉头螺钉 第2部分：8.8级、不锈钢及有色金属螺钉 |
China National Standards IT |
English PDF |
| GB/T 819.1-2016 |
Countersunk flat head screws wITh cross recess—Part 1: Property class 4.8 十字槽沉头螺钉 第1部分：4.8级 |
China National Standards IT |
English PDF |
| Find out:17165Items | To Page of: First -Previous-Next -Last | [62] [63] [64] [65] [66] [67] [68] |
+86-755-25831330
