GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 42383.4-2023 |
Intelligent Manufacturing Network ColLaborative Design Part 4: Design Requirements for the Whole Life Cycle 智能制造 网络协同设计 第4部分:面向全生命周期设计要求 |
China National Standards La |
English PDF |
GB/T 42383.2-2023 |
Intelligent Manufacturing Network ColLaborative Design Part 2: Software Interface and Data Interaction 智能制造 网络协同设计 第2部分:软件接口和数据交互 |
China National Standards La |
English PDF |
GB/T 42383.1-2023 |
Intelligent Manufacturing Network ColLaborative Design Part 1: General Requirements 智能制造 网络协同设计 第1部分:通用要求 |
China National Standards La |
English PDF |
GB/T 21373-2023 |
Intellectual property literature and information cLassification and code 知识产权文献与信息 分类及代码 |
China National Standards La |
English PDF |
GB/T 15544.1-2023 |
CalcuLation of short-circuit current in three-phase AC system Part 1: Current calculation 三相交流系统短路电流计算 第1部分:电流计算 |
China National Standards La |
English PDF |
GB/T 28627-2023 |
PLastering plaster 抹灰石膏 |
China National Standards La |
English PDF |
GB/T 42324-2023 |
Cable gLands for electrical installations 电气装置用电缆密封头 |
China National Standards La |
English PDF |
GB/T 24718-2023 |
Anti-gLare board 防眩板 |
China National Standards La |
English PDF |
GB/T 29551-2023 |
SoLar photovoltaic laminated glass for buildings 建筑用太阳能光伏夹层玻璃 |
China National Standards La |
English PDF |
GB/T 42409-2023 |
Internet of Things Electronic Shelf Label System General Requirements 物联网 电子价签系统 总体要求 |
China National Standards La |
English PDF |
GB/T 42355.2-2023 |
Anchorage pLate reinforcement for reinforced concrete - Part 2: Test methods 钢筋混凝土用锚固板钢筋 第2部分:试验方法 |
China National Standards La |
English PDF |
GB/T 42355.1-2023 |
Anchorage pLate reinforcement for reinforced concrete - Part 1: Specifications 钢筋混凝土用锚固板钢筋 第1部分:技术条件 |
China National Standards La |
English PDF |
GB/T 42394-2023 |
Cable cLamps for electrical installations 电气装置用电缆夹具 |
China National Standards La |
English PDF |
GB/T 19215.5-2023 |
Cable duct systems for electrical instalLations - Part 2: Particular requirements - Section 3: Grooved cable duct systems for installation in cabinets 电气安装用电缆槽管系统 第2部分:特殊要求 第3节:安装在机柜中的带槽电缆线槽系统 |
China National Standards La |
English PDF |
GB/T 42320-2023 |
Energy Internet PLanning Technical Guidelines 能源互联网规划技术导则 |
China National Standards La |
English PDF |
GB/T 8937-2023 |
edible animal fat Lard 食用动物油脂 猪油 |
China National Standards La |
English PDF |
GB/T 42311-2023 |
Nanotechnology Characterization of nanoparticles in respiratory exposure chambers for inhaLation toxicity studies 纳米技术 吸入毒性研究中呼吸暴露舱内纳米颗粒的表征 |
China National Standards La |
English PDF |
GB/T 42450-2023 |
information technology big data data resource pLanning 信息技术 大数据 数据资源规划 |
China National Standards La |
English PDF |
GB/T 26254-2023 |
Household and simiLar health care massage cushions 家用和类似用途保健按摩垫 |
China National Standards La |
English PDF |
GB/T 42332-2023 |
Specifications for surveying and mapping of topographic maps of isLands and surrounding sea areas 海岛及周边海域地形图测绘规范 |
China National Standards La |
English PDF |
GB/T 42125.14-2023 |
Safety requirements for electrical equipment for measurement, control and Laboratory use - Part 14: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes 测量、控制和实验室用电气设备的安全要求 第14部分:实验室用分析和其他目的自动和半自动设备的特殊要求 |
China National Standards La |
English PDF |
GB/T 42412-2023 |
Technical requirements for personalized customization based on the industrial cloud pLatform 基于工业云平台的个性化定制技术要求 |
China National Standards La |
English PDF |
GB/T 42304-2023 |
SLaughter Animal Welfare Guidelines 屠宰动物福利准则 |
China National Standards La |
English PDF |
GB/T 21362-2023 |
Heat pump water heaters for commercial or industrial and simiLar purposes 商业或工业用及类似用途的热泵热水机 |
China National Standards La |
English PDF |
GB/T 24721.5-2023 |
GLass fiber reinforced plastic products for road use - Part 5: Base plates for markings 公路用玻璃纤维增强塑料产品 第5部分:标志底板 |
China National Standards La |
English PDF |
GB/T 24721.4-2023 |
GLass fiber reinforced plastic products for road use - Part 4: Unpressurized communication manhole covers 公路用玻璃纤维增强塑料产品 第4部分:非承压通信井盖 |
China National Standards La |
English PDF |
GB/T 24721.3-2023 |
GLass fiber reinforced plastic products for road use - Part 3: Pipes 公路用玻璃纤维增强塑料产品 第3部分:管道 |
China National Standards La |
English PDF |
GB/T 24721.2-2023 |
GLass fiber reinforced plastic products for road use - Part 2: Pipe boxes 公路用玻璃纤维增强塑料产品 第2部分:管箱 |
China National Standards La |
English PDF |
GB/T 24721.1-2023 |
GLass fiber reinforced plastic products for road use - Part 1: General 公路用玻璃纤维增强塑料产品 第1部分:通则 |
China National Standards La |
English PDF |
GB/T 42388-2023 |
Consumer Product Safety SurveilLance Guidelines 消费品安全监测指南 |
China National Standards La |
English PDF |
GB/T 42330-2023 |
Oceanic Sample Management CLassification Code 大洋样品管理分类代码 |
China National Standards La |
English PDF |
GB/T 42351.1-2023 |
Preparation of particuLate standards Part 1: Polydisperse standards based on picket fence distribution of monodisperse spherical particles 颗粒标准样品的制备 第1部分:基于单分散球形颗粒尖桩栅栏分布的多分散标准样品 |
China National Standards La |
English PDF |
GB/T 16608.1-2023 |
Basic electromechanical reLays for telecommunications with qualification - Part 1: General specification and blank detail specification 有质量评定的电信用基础机电继电器 第1部分:总规范与空白详细规范 |
China National Standards La |
English PDF |
GB/T 21711.1-2023 |
Basic electromechanical reLays - Part 1: General principles and safety requirements 基础机电继电器 第1部分:总则与安全要求 |
China National Standards La |
English PDF |
GB/T 1413-2023 |
Series 1 containers - CLassification, dimensions and rated masses 系列1集装箱 分类、尺寸和额定质量 |
China National Standards La |
English PDF |
GB/T 16731-2023 |
CLassification of sound-absorbing performance of building sound-absorbing products 建筑吸声产品的吸声性能分级 |
China National Standards La |
English PDF |
GB/T 13530-2023 |
Test Method for Sodium EthoxyLated Alkyl Sulfates 乙氧基化烷基硫酸钠试验方法 |
China National Standards La |
English PDF |
GB/T 42419-2023 |
Surface Carbon Verification Technical ReguLations 地表碳核查技术规程 |
China National Standards La |
English PDF |
GB/T 42308-2023 |
Potentiometers for electronic equipment - Part 6-1: BLank detail specification - Surface mount preset potentiometers - Assessment level EZ 电子设备用电位器 第6-1部分:空白详细规范 表面安装预调电位器 评定水平EZ |
China National Standards La |
English PDF |
GB/T 42333-2023 |
Determination of iodine content in soil and water system sediments Ammonia closed solution-inductively coupled pLasma mass spectrometry 土壤、水系沉积物 碘含量的测定 氨水封闭溶解-电感耦合等离子体质谱法 |
China National Standards La |
English PDF |
GB/T 27894.3-2023 |
Natural gas - Determination of composition and calcuLation of associated uncertainties by gas chromatography - Part 3: Precision and bias 天然气 用气相色谱法测定组成和计算相关不确定度 第3部分:精密度和偏差 |
China National Standards La |
English PDF |
GB 19239-2022 |
Specifications for instalLation of gas system for gas vehicles 燃气汽车燃气系统安装规范 |
China National Standards La |
English PDF |
GB 9706.204-2022 |
Medical electrical equipment - Part 2-4: ParticuLar requirements for basic safety and essential performance of cardiac defibrillators 医用电气设备 第2-4部分:心脏除颤器的基本安全和基本性能专用要求 |
China National Standards La |
English PDF |
GB 12320-2022 |
Specifications for CompiLation and Drawing of China's Nautical Charts 中国航海图编绘规范 |
China National Standards La |
English PDF |
GB 7300.1002-2022 |
Feed additives - Part 10: FLavoring and attractant substances - Allicin 饲料添加剂 第10部分:调味和诱食物质 大蒜素 |
China National Standards La |
English PDF |
GB 11614-2022 |
pLate glass 平板玻璃 |
China National Standards La |
English PDF |
GB 6675.11-2014 |
Toy Safety Part 11: Household Swings, Slides and SimiLar Indoor and Outdoor Activity Toys "No. 1 Amendment" 玩具安全 第11部分:家用秋千、滑梯及类似用途室内、室外活动玩具《第1号修改单》 |
China National Standards La |
English PDF |
GB 41731-2022 |
InfLatable lifejackets for boats 船用气胀式救生衣 |
China National Standards La |
English PDF |
GB/T 22048-2022 |
Determination of specific phthaLate plasticizers in toys and children's products 玩具及儿童用品中特定邻苯二甲酸酯增塑剂的测定 |
China National Standards La |
English PDF |
GB/T 41672-2022 |
Surgical ImpLants Osteoinductive Calcium Phosphate Bioceramics 外科植入物 骨诱导磷酸钙生物陶瓷 |
China National Standards La |
English PDF |
GB/T 31290-2022 |
Carbon fibers - Determination of tensile properties of monofiLaments 碳纤维 单丝拉伸性能的测定 |
China National Standards La |
English PDF |
GB/T 4207-2022 |
Method for determination of tracking resistance index and reLative tracking index of solid insulating materials 固体绝缘材料耐电痕化指数和相比电痕化指数的测定方法 |
China National Standards La |
English PDF |
GB/T 41628-2022 |
Cistanche Cultivation Technical ReguLations 肉苁蓉培育技术规程 |
China National Standards La |
English PDF |
GB/T 41539-2022 |
Product specifications for satellite remote sensing images of Land surface temperature 卫星遥感影像地表温度产品规范 |
China National Standards La |
English PDF |
GB/T 37047-2022 |
Earth-to-ground fLash density based on the Lightning Location System (LLS) General 基于雷电定位系统(LLS)的地闪密度 总则 |
China National Standards La |
English PDF |
GB/T 17465.1-2022 |
Household and simiLar appliance couplers - Part 1: General requirements 家用和类似用途器具耦合器 第1部分:通用要求 |
China National Standards La |
English PDF |
GB/T 20111.6-2022 |
Electrical insuLation systems - Thermal assessment procedures - Part 6: Multifactorial assessment with additional factors in diagnostic tests 电气绝缘系统 热评定规程 第6部分:在诊断试验中增加因子的多因子评定 |
China National Standards La |
English PDF |
GB/T 41513-2022 |
CLassification and Terminology of Spray Equipment 喷射设备分类及名词术语 |
China National Standards La |
English PDF |
GB/T 41655-2022 |
Nondestructive Testing Ultrasonic Testing Welding, Rolling and Explosive Composite CLadding Testing Technology 无损检测 超声检测 焊接、轧制和爆炸复合覆层检测技术 |
China National Standards La |
English PDF |
GB/T 41569-2022 |
Lasers and laser-related equipment - Laser installations - Basic requirements for documentation 激光器和激光相关设备 激光装置 文件基本要求 |
China National Standards La |
English PDF |
GB/T 223.54-2022 |
Iron, steel and alloys - Determination of nickel content - FLame atomic absorption spectrometry 钢铁及合金 镍含量的测定 火焰原子吸收光谱法 |
China National Standards La |
English PDF |
GB/T 41575-2022 |
CLassification and codes of unhealthy Internet content for minors 未成年人互联网不健康内容分类与代码 |
China National Standards La |
English PDF |
GB/T 16895.25-2022 |
Low-Voltage Electrical InstalLations Part 7-711: Requirements for Special Installations or Locations Exhibitions, Displays and Exhibition Areas 低压电气装置 第7-711部分:特殊装置或场所的要求 展览、展示及展区 |
China National Standards La |
English PDF |
GB/T 19608.2-2022 |
CLassification of special environmental conditions Part 2: hot and dry desert 特殊环境条件分级 第2部分:干热沙漠 |
China National Standards La |
English PDF |
GB/T 19608.1-2022 |
CLassification for special environmental conditions Part 1: Dry heat 特殊环境条件分级 第1部分:干热 |
China National Standards La |
English PDF |
GB/T 2423.24-2022 |
Environmental testing - Part 2: Test methods - Test S: SimuLation of solar radiation on the ground and guidelines for solar radiation tests and weathering tests 环境试验 第2部分:试验方法 试验S:模拟地面上的太阳辐射及太阳辐射试验和气候老化试验导则 |
China National Standards La |
English PDF |
GB/T 5019.10-2022 |
InsuLating materials based on mica - Part 10: Mica tapes for fire-resistant safety cables 以云母为基的绝缘材料 第10部分:耐火安全电缆用云母带 |
China National Standards La |
English PDF |
GB/T 15022.9-2022 |
Resin-based reactive compounds for electrical insuLation - Part 9: Resins for cable accessories 电气绝缘用树脂基活性复合物 第9部分:电缆附件用树脂 |
China National Standards La |
English PDF |
GB/T 20632.3-2022 |
Steel paper for electrical purposes - Part 3: FLat steel paper 电气用钢纸 第3部分:平板钢纸 |
China National Standards La |
English PDF |
GB/T 41592-2022 |
Method for determination of 2-furfural and reLated components in mineral insulating oils 矿物绝缘油 2-糠醛和相关组分的测定方法 |
China National Standards La |
English PDF |
GB/T 21221-2022 |
InsuLating fluids Unused insulating fluids based on synthetic aromatic hydrocarbons 绝缘液体 以合成芳烃为基的未使用过的绝缘液体 |
China National Standards La |
English PDF |
GB/T 41633.2-2022 |
InsuLating liquids - Determination of acid value - Part 2: Colorimetric titration 绝缘液体 酸值的测定 第2部分:比色滴定法 |
China National Standards La |
English PDF |
GB/T 41632-2022 |
InsuLating fluids Unused synthetic organic esters for electrical purposes 绝缘液体 电气用未使用过的合成有机酯 |
China National Standards La |
English PDF |
GB/T 26358-2022 |
CLassification of tourist resorts 旅游度假区等级划分 |
China National Standards La |
English PDF |
GB/T 41631-2022 |
Unused mineral insuLating oil for oil-filled cables 充油电缆用未使用过的矿物绝缘油 |
China National Standards La |
English PDF |
GB/T 1040.2-2022 |
PLastics - Determination of tensile properties - Part 2: Test conditions for molded and extruded plastics 塑料 拉伸性能的测定 第2部分:模塑和挤塑塑料的试验条件 |
China National Standards La |
English PDF |
GB/T 41591-2022 |
First Criticality Test of PWR Nuclear Power PLant Reactor 压水堆核电厂反应堆首次临界试验 |
China National Standards La |
English PDF |
GB/T 41639-2022 |
PLastics Determination of disintegration rate of plastic materials under laboratory-scale simulated composting conditions 塑料 在实验室规模模拟堆肥化条件下塑料材料崩解率的测定 |
China National Standards La |
English PDF |
GB/T 41638.1-2022 |
PLastics - Carbon and environmental footprints of bio-based plastics - Part 1: General principles 塑料 生物基塑料的碳足迹和环境足迹 第1部分:通则 |
China National Standards La |
English PDF |
GB/T 20551-2022 |
HACCP Application Code for Livestock and Poultry SLaughtering 畜禽屠宰HACCP应用规范 |
China National Standards La |
English PDF |
GB/T 7717.16-2022 |
Acrylonitrile for industrial use - Part 16: Determination of iron and copper content - Graphite furnace atomic absorption spectrometry and inductively coupled pLasma mass spectrometry 工业用丙烯腈 第16部分:铁、铜含量的测定 石墨炉原子吸收光谱法和电感耦合等离子体质谱法 |
China National Standards La |
English PDF |
GB/T 2546.2-2022 |
PLastics - Polypropylene (PP) molding and extrusion materials - Part 2: Specimen preparation and property determination 塑料 聚丙烯(PP)模塑和挤出材料 第2部分:试样制备和性能测定 |
China National Standards La |
English PDF |
GB/T 2546.1-2022 |
PLastics - Polypropylene (PP) molding and extrusion materials - Part 1: Nomenclature system and basis of classification 塑料 聚丙烯(PP)模塑和挤出材料 第1部分:命名系统和分类基础 |
China National Standards La |
English PDF |
GB/T 41653-2022 |
Corrosion of metals and alloys - Anodic test method for susceptibility to intergranuLar corrosion of heat-treated aluminum alloys 金属和合金的腐蚀 热处理铝合金晶间腐蚀敏感性阳极试验方法 |
China National Standards La |
English PDF |
GB/T 20564.6-2022 |
High-strength cold-rolled steel sheets and strips for automobiles—Part 6: Transformation-induced pLasticity steels 汽车用高强度冷连轧钢板及钢带 第6部分:相变诱导塑性钢 |
China National Standards La |
English PDF |
GB/T 8719-2022 |
General reguLations on packaging, marking, storage, transportation and quality certificate of carbon materials and their products 炭素材料及其制品的包装、标志、储存、运输和质量证明书的一般规定 |
China National Standards La |
English PDF |
GB/T 26047-2022 |
Primary Post Lithium Battery InsuLator 一次柱式锂电池绝缘子 |
China National Standards La |
English PDF |
GB/T 26052-2022 |
Carbide TubuLar Welding Rod 硬质合金管状焊条 |
China National Standards La |
English PDF |
GB/Z 33588.8-2022 |
Lightning protection system components (LPSC) Part 8: Requirements for isoLating components of lightning protection systems 雷电防护系统部件(LPSC) 第8部分:雷电防护系统隔离部件的要求 |
China National Standards La |
English PDF |
GB/T 19889.7-2022 |
Acoustics - Measurement of sound insuLation of buildings and building components - Part 7: In situ measurement of impact sound insulation 声学 建筑和建筑构件隔声测量 第7部分:撞击声隔声的现场测量 |
China National Standards La |
English PDF |
GB/T 10827.3-2022 |
Industrial vehicles - Safety requirements and verification - Part 3: Additional requirements for vehicles with lifted operating pLatforms and vehicles specially designed to operate with lifted loads 工业车辆 安全要求和验证 第3部分:对带有起升操作台的车辆和专门设计为带起升载荷运行的车辆的附加要求 |
China National Standards La |
English PDF |
GB/T 41573-2022 |
Automation system and integration General requirements for integration of technology resource cloud pLatform 自动化系统与集成 科技资源云平台集成通用要求 |
China National Standards La |
English PDF |
GB/T 21697-2022 |
InsuLation coordination of lightning overvoltage in low-voltage distribution lines and electronic systems 低压配电线路和电子系统中雷电过电压的绝缘配合 |
China National Standards La |
English PDF |
GB/T 41572-2022 |
Measuring method of main parameters of pulsed Laser in time domain 脉冲激光时域主要参数测量方法 |
China National Standards La |
English PDF |
GB/T 1927.13-2022 |
Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 13: Determination of transverse grain compressive modulus of eLasticity 无疵小试样木材物理力学性质试验方法 第13部分:横纹抗压弹性模量测定 |
China National Standards La |
English PDF |
GB/T 41562-2022 |
CLassification method of online reputation of consumer goods 消费品在线信誉 等级划分方法 |
China National Standards La |
English PDF |
GB/T 17465.6-2022 |
Household and simiLar appliance couplers - Part 3: Standard leaflets and gauges 家用和类似用途器具耦合器 第3部分:标准活页和量规 |
China National Standards La |
English PDF |
GB/T 41585-2022 |
Specifications for writing commissioning program of pressurized water reactor nuclear power pLant 压水堆核电厂调试大纲编写规范 |
China National Standards La |
English PDF |
GB/T 41586-2022 |
Basic input parameters and output results of nuclear power pLant emergency assessment 核电厂应急评价基础输入参数和输出结果 |
China National Standards La |
English PDF |
GB/T 41576-2022 |
Requirements for unit performance test after fuel loading in pressurized water reactor nuclear power pLant 压水堆核电厂装料后机组性能试验要求 |
China National Standards La |
English PDF |
Find out:15610Items | To Page of: First -Previous-Next -Last | [2] [3] [4] [5] [6] [7] [8] |