Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 3286.1-2012 |
Methods for chemical analysis of limestone and dolomite - Part 1: The determination of calcium oxide and magnesium oxide content - The complexometric titration method and the flame atomic absorption spectrometric method 石灰石及白云石化学分析方法 第1部分：氧化钙和氧化镁含量的测定 络合滴定法和火焰原子吸收光谱法 |
China National Standards M |
 English PDF |
| GB/T 2988-2012 |
High aluMina bricks 高铝砖 |
China National Standards M |
English PDF |
| GB/T 28909-2012 |
Extra-high strength structural steel plates in the heat-treatMent condition 超高强度结构用热处理钢板 |
China National Standards M |
English PDF |
| GB/T 28908-2012 |
High-purity chroMium metal 高纯金属铬 |
China National Standards M |
English PDF |
| GB/T 28904-2012 |
Steel strips for steel-aluMinum composite 钢铝复合用钢带 |
China National Standards M |
English PDF |
| GB/T 28901-2012 |
Analysis of coke-oven gas coMposition by gas chromatography 焦炉煤气组分气相色谱分析方法 |
China National Standards M |
English PDF |
| GB/T 28900-2012 |
Test Methods of steel for reinforcement of concrete 钢筋混凝土用钢材试验方法 |
China National Standards M |
English PDF |
| GB/T 28898-2012 |
Evaluation of uncertainty in cheMical composition analysis for metallurgical materials 冶金材料化学成分分析测量不确定度评定 |
China National Standards M |
English PDF |
| GB/T 28897-2012 |
Steel pipes of coMplex plastic 钢塑复合管 |
China National Standards M |
English PDF |
| GB/T 28896-2012 |
Metallic Materials - Method of test for the determination of quasistatic fracture toughness of welds 金属材料 焊接接头准静态断裂韧度测定的试验方法 |
China National Standards M |
English PDF |
| GB/T 28895-2012 |
Protective clothing - PerforMance requirements of oil repellency, sorl release, antistatic clothing 防护服装 抗油易去污防静电防护服 |
China National Standards M |
English PDF |
| GB/T 28812-2012 |
SteaM turbine specification for geothermal power station 地热发电用汽轮机规范 |
China National Standards M |
English PDF |
| GB/T 28765-2012 |
Packaging Material - Test methods for organic vapor transmission rate for plastic film, sheet and package 包装材料 塑料薄膜、片材和容器的有机气体透过率试验方法 |
China National Standards M |
English PDF |
| GB/T 28764-2012 |
Test Method for sealing characteristics of packaging containers - Ultrasonic method 包装容器密闭性检测方法 超声波法 |
China National Standards M |
English PDF |
| GB/T 28763-2012 |
NuMerically controlled tube bending machine 数控弯管机 |
China National Standards M |
English PDF |
| GB/T 28761-2012 |
Metalforming machinery - Method of type designation 锻压机械 型号编制方法 |
China National Standards M |
English PDF |
| GB/T 20167-2012 |
Physical test Method of rare earth polishing powder - Determination of burnishing mass and scratch - Gravimetry 稀土抛光粉物理性能测试方法 抛蚀量和划痕的测定 重量法 |
China National Standards M |
English PDF |
| GB/T 20166.2-2012 |
CheMical analysis methods of rare earth polishing powder - Part 2: Determination fluorine content - Ion selective electrode analysis 稀土抛光粉化学分析方法 第2部分：氟量的测定 离子选择性电极法 |
China National Standards M |
English PDF |
| GB/T 20166.1-2012 |
CheMical analysis methods of rare earth polishing powder - Part 1: Determination of cerium oxide content - Titrimetry 稀土抛光粉化学分析方法 第1部分：氧化铈量的测定 滴定法 |
China National Standards M |
English PDF |
| GB/T 18880-2012 |
Materials for bonded neodymium iron boron permanent magnets 粘结钕铁硼永磁材料 |
China National Standards M |
English PDF |
| GB/T 18301-2012 |
Refractory products - DeterMination of resistance to abrasion at ambient temperature 耐火材料 常温耐磨性试验方法 |
China National Standards M |
English PDF |
| GB/T 18116.1-2012 |
YttriuM-europium oxide - Part 1: Determination of lanthanum oxide, cerium oxide, praseodymium oxide, neodymium oxide, samarium oxide, gadolinium oxide, terbium oxide, dysprosium oxide, holmium oxide, erbium oxide, thulium oxide, ytterbium oxide and luteti 氧化钇铕化学分析方法 第1部分：氧化镧、氧化铈、氧化镨、氧化钕、氧化钐、氧化钆、氧化铽、氧化镝、氧化钬、氧化铒、氧化铥、氧化镱和氧化镥量的测定 |
China National Standards M |
English PDF |
| GB/T 16716.7-2012 |
Packaging and packaging waste - Part 7：Recoverable by coMposting and biodegradation 包装与包装废弃物 第7部分: 生物降解和堆肥 |
China National Standards M |
English PDF |
| GB/T 15547-2012 |
Blanks of forged steel rolls for cold rolling Mill 锻钢冷轧辊辊坯 |
China National Standards M |
English PDF |
| GB/T 14999.4-2012 |
Test Methods for superalloys - Part 4: Determination of characterizing banding grains and primary carbides distribution of superalloy rollings 高温合金试验方法 第4部分：轧制高温合金条带晶粒组织和一次碳化物分布测定 |
China National Standards M |
English PDF |
| GB/T 14999.3-2012 |
Test Methods for superalloys - Part 3: Verification of longitudinal fracture of bars 高温合金试验方法 第3部分：棒材纵向断口检验 |
China National Standards M |
English PDF |
| GB/T 14999.2-2012 |
Test Methods for superalloys - Part 2: Verification of transverse macro-structures and defect by etch 高温合金试验方法 第2部分：横向低倍组织及缺陷酸浸检验 |
China National Standards M |
English PDF |
| GB/T 14999.1-2012 |
Test Method for superalloys - Part 1: Verification of longitudinal macro-structures and defect by etch 高温合金试验方法 第1部分：纵向低倍组织及缺陷酸浸检验 |
China National Standards M |
English PDF |
| GB/T 14975-2012 |
SeaMless stainless steel tubes for structure 结构用不锈钢无缝钢管 |
China National Standards M |
English PDF |
| GB/T 12770-2012 |
Welded stainless steel tubes for Mechanical structures 机械结构用不锈钢焊接钢管 |
China National Standards M |
English PDF |
| GB/T 10325-2012 |
Shaped refractory products-rule of acceptance,saMpling and inspection 定形耐火制品验收抽样检验规则 |
China National Standards M |
English PDF |
| GB 4706.64-2012 |
Safety of household and siMilar electrical appliances - Part 2: Particular requirements for scissor type grass shears 家用和类似用途电器的安全 第2部分：剪刀型草剪的专用要求 |
China National Standards M |
English PDF |
| GB 3883.9-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for tappers 手持式电动工具的安全 第2部分：攻丝机的专用要求 |
China National Standards M |
English PDF |
| GB 3883.8-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for sheet metal shears and nibblers 手持式电动工具的安全 第2部分：电剪刀和电冲剪的专用要求 |
China National Standards M |
English PDF |
| GB 3883.7-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for hammers 手持式电动工具的安全 第2部分：锤类工具的专用要求 |
China National Standards M |
English PDF |
| GB 3883.6-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for drills and impact drills 手持式电动工具的安全 第2部分：电钻和冲击电钻的专用要求 |
China National Standards M |
English PDF |
| GB 3883.4-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for sanders and polishers other than disk type 手持式电动工具的安全 第2部分：非盘式砂光机和抛光机的专用要求 |
China National Standards M |
English PDF |
| GB 3883.2-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for screwdrivers and impact wrenches 手持式电动工具的安全 第2部分：螺丝刀和冲击扳手的专用要求 |
China National Standards M |
English PDF |
| GB 3883.21-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for band saws 手持式电动工具的安全 第2部分：带锯的专用要求 |
China National Standards M |
English PDF |
| GB 3883.20-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for strapping tools 手持式电动工具的安全 第2部分：捆扎机的专用要求 |
China National Standards M |
English PDF |
| GB 3883.19-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for drain cleaners 手持式电动工具的安全 第2部分：管道疏通机的专用要求 |
China National Standards M |
English PDF |
| GB 3883.12-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for concrete vibrators 手持式电动工具的安全 第2部分：混凝土振动器的专用要求 |
China National Standards M |
English PDF |
| GB 3883.11-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for reciprocating saws(jig and sabre saws) 手持式电动工具的安全 第2部分：往复锯(曲线锯、刀锯)的专用要求 |
China National Standards M |
English PDF |
| GB 28884-2012 |
SeaMless steel tubes for large volume gas cylinder 大容积气瓶用无缝钢管 |
China National Standards M |
English PDF |
| GB 28883-2012 |
CoMposite seamless steel tubes for pressure 承压用复合无缝钢管 |
China National Standards M |
English PDF |
| GB 28881-2012 |
Hand protection - Protective gloves against cheMicals and micro-organisms 手部防护 化学品及微生物防护手套 |
China National Standards M |
English PDF |
| GB 19215.3-2012 |
Cable trunking and ducting systeMs for electrical installations - Part 2-2: Particular requirements - Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations 电气安装用电缆槽管系统 第2部分：特殊要求 第2节：安装在地板下和与地板齐平的电缆槽管系统 |
China National Standards M |
English PDF |
| GB 18082.1-2012 |
Health protection zone for leather and fur and Manufactured products industry - Part 1：Leather tanning industry 皮革、毛皮及其制品业卫生防护距离 第1部分：皮革鞣制加工业 |
China National Standards M |
English PDF |
| GB 17464-2012 |
Connecting devices - Electrical copper conductors - Safety requireMents for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0.2 mm2 up to 35 mm2 (included) 连接器件 电气铜导线 螺纹型和无螺纹型夹紧件的安全要求 适用于0.2 mm2以上至35 mm2（包括）导线的夹紧件的通用要求和特殊要求 |
China National Standards M |
English PDF |
| GB 11887-2012 |
Jewellery - Fineness of precious Metal alloys and designation 首饰 贵金属纯度的规定及命名方法 |
China National Standards M |
English PDF |
| GB/T 28794-2012 |
Technical requireMents of oily-water separation system fishing vessel 渔业船舶油污水分离系统技术要求 |
China National Standards M |
English PDF |
| GB/T 28793-2012 |
Technical requireMents of fuel saving for fishing vessel diesel engines 渔业船舶柴油机节油技术要求 |
China National Standards M |
English PDF |
| GB/T 28792-2012 |
Technical specification on radio coMmunication for train control 列车无线调度通信系统技术条件 |
China National Standards M |
English PDF |
| GB/T 28790-2012 |
Technical requireMents and measuring methods of fuel saving devices for diesel engines of fishing vessel 渔业船舶柴油机节油装置技术条件及检测方法 |
China National Standards M |
English PDF |
| GB/T 28787-2012 |
Data coMmunication protocol between on-board information terminal of urban public transit dispatching and control center 城市公共交通调度车载信息终端与调度中心间数据通信协议 |
China National Standards M |
English PDF |
| GB 19159-2012 |
AutoMotive liquefied petroleum gases 车用液化石油气 |
China National Standards M |
English PDF |
| GB/T 983-2012 |
Covered electrodes for Manual metal arc welding of stainless and heat-resisting steels 不锈钢焊条 |
China National Standards M |
English PDF |
| GB/T 8926-2012 |
Standard test Method for insolubles in used lubricating oils 在用的润滑油不溶物测定法 |
China National Standards M |
English PDF |
| GB/T 8017-2012 |
Standard test Method for vapor pressure of petroleum products (Reid Method) 石油产品蒸气压的测定 雷德法 |
China National Standards M |
English PDF |
| GB/T 7631.13-2012 |
Lubricants，industrial oils and related products(class L) - Classification - Part 13: FaMily A(Total loss systems) 润滑剂、工业用油和有关产品（L类）的分类 第13部分：A组（全损耗系统） |
China National Standards M |
English PDF |
| GB/T 9793-2012 |
TherMal spraying - Metallic and other inorganic coatings - Zinc,aluminium and their alloys 热喷涂 金属和其他无机覆盖层 锌、铝及其合金 |
China National Standards M |
English PDF |
| GB/T 6075.2-2012 |
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50MW with normal operating speeds of 1500r/min，1800r/min，3000r/min and 3600r/min 机械振动 在非旋转部件上测量评价机器的振动 第2部分：50MW以上，额定转速1500 r/min、1800 r/min、3000 r/min、3600 r/min陆地安装的汽轮机和发电机 |
China National Standards M |
English PDF |
| GB/T 6075.1-2012 |
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines 机械振动 在非旋转部件上测量评价机器的振动 第1部分：总则 |
China National Standards M |
English PDF |
| GB/T 5118-2012 |
Covered electrodes for Manual metal arc welding of creep-resisting steels 热强钢焊条 |
China National Standards M |
English PDF |
| GB/T 5117-2012 |
Covered electrodes for Manual metal arc welding of non-alloy and fine grain steels 非合金钢及细晶粒钢焊条 |
China National Standards M |
English PDF |
| GB/T 4214.7-2012 |
Household and siMilar electrical appliances - Test code for determination of airborne acoustical noise - Particular requirements for tumble dryers 家用和类似用途电器噪声测试方法 滚筒式干衣机的特殊要求 |
China National Standards M |
English PDF |
| GB/T 3965-2012 |
DeterMination of diffusible hydrogen in deposited metal 熔敷金属中扩散氢测定方法 |
China National Standards M |
English PDF |
| GB/T 28912-2012 |
Test Method for two phase relative permeability in rock 岩石中两相流体相对渗透率测定方法 |
China National Standards M |
English PDF |
| GB/T 28911-2012 |
Vocabulary of drilling engineering for the petroleuM and natural gas 石油天然气钻井工程术语 |
China National Standards M |
English PDF |
| GB/T 28910-2012 |
The Measurement method of crude oil rheological properties 原油流变性测定方法 |
China National Standards M |
English PDF |
| GB/T 28804-2012 |
Copper-free silver Mirror on flat glass 无铜镀银玻璃镜 |
China National Standards M |
English PDF |
| GB/T 28803-2012 |
Directives for risk Management of consumer products safety 消费品安全风险管理导则 |
China National Standards M |
English PDF |
| GB/T 28802-2012 |
General technical requireMents for jade carving 玉器雕琢通用技术要求 |
China National Standards M |
English PDF |
| GB/T 28799.3-2012 |
Plastics piping systeMs for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings 冷热水用耐热聚乙烯（PE-RT）管道系统 第3部分：管件 |
China National Standards M |
English PDF |
| GB/T 28799.2-2012 |
Plastics piping systeMs for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes 冷热水用耐热聚乙烯（PE-RT）管道系统 第2部分：管材 |
China National Standards M |
English PDF |
| GB/T 28799.1-2012 |
Plastics piping systeMs for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General 冷热水用耐热聚乙烯(PE-RT)管道系统 第1部分：总则 |
China National Standards M |
English PDF |
| GB/T 28795-2012 |
Cold cathode ultraviolet gerMicidal lamps 冷阴极紫外线杀菌灯 |
China National Standards M |
English PDF |
| GB/T 28786-2012 |
VacuuM technology - Methods of bonding strength measurement for vacuum coating film - Measuring adhesion by tape test 真空技术 真空镀膜层结合强度测量方法 胶带粘贴法 |
China National Standards M |
English PDF |
| GB/T 28785-2012 |
Mechanical vibration - Criteria and safeguards for the in-situ balancing of medium and large rotors 机械振动 大中型转子现场平衡的准则和防护 |
China National Standards M |
English PDF |
| GB/T 28784.3-2012 |
Mechanical vibration - Measurement of vibration on ships - Part 3: Pre-installation vibration measurement of shipboard equipment 机械振动 船舶振动测量 第3部分：船上设备安装前的振动测量 |
China National Standards M |
English PDF |
| GB/T 28783-2012 |
PneuMatic fluid power - Standard reference atmosphere 气动 标准参考大气 |
China National Standards M |
English PDF |
| GB/T 28782.2-2012 |
Hydraulic fluid power - Measurement techniques - Part 2: Measurement of average steady-state pressure in a closed conduit 液压传动测量技术 第2部分：密闭回路中平均稳态压力的测量 |
China National Standards M |
English PDF |
| GB/T 28781-2012 |
PneuMatic fluid power Compact cylinders, bores form 20mm to 100mm - Basic dimensions and mounting dimensions 气动 缸内径20mm至100mm的紧凑型气缸 基本尺寸、安装尺寸 |
China National Standards M |
English PDF |
| GB/T 28780-2012 |
Safety of Machinery - Integral lighting of machines 机械安全 机器的整体照明 |
China National Standards M |
English PDF |
| GB/T 28777-2012 |
Process valve qualification procedure for the petrocheMical industry 石化工业用阀门的评定 |
China National Standards M |
English PDF |
| GB/T 28776-2012 |
Steel gate, globe and check valve for the petroleuM and natural gas industries (for sizes DN100 and smaller) 石油和天然气工业用钢制闸阀、截止阀和止回阀（≤DN100） |
China National Standards M |
English PDF |
| GB/T 28775-2012 |
Synchronous belt drives - Metric pitch - Trapezoidal toothed synchronous pulleys 同步带传动 米制节距 梯形齿同步带轮 |
China National Standards M |
English PDF |
| GB/T 28774-2012 |
Synchronous belt drives - Metric pitch - Trapezoidal toothed synchronous belts 同步带传动 米制节距 梯形齿同步带 |
China National Standards M |
English PDF |
| GB/T 28772-2012 |
Classification of internal coMbustion engine oils 内燃机油分类 |
China National Standards M |
English PDF |
| GB/T 28771-2012 |
AutoMatic welding equipment for profile steel 型钢自动化焊接装备 |
China National Standards M |
English PDF |
| GB/T 28770-2012 |
Test Methods for solders 软钎料试验方法 |
China National Standards M |
English PDF |
| GB/T 28769-2012 |
Test Method for determination of free glycerol content in Fatty Acid Methyl Esters(FAME) by gas chromatography 脂肪酸甲酯中游离甘油含量的测定 气相色谱法 |
China National Standards M |
English PDF |
| GB/T 28768-2012 |
DeterMination of hydrocarbon types and oxygenates in automotive-motor gasoline by multidimensional gas chromatography method 车用汽油烃类组成和含氧化合物的测定 多维气相色谱法 |
China National Standards M |
English PDF |
| GB/T 28767-2012 |
Classification of autoMotive gear lubricants 车辆齿轮油分类 |
China National Standards M |
English PDF |
| GB/T 28766-2012 |
Natural gas - PerforMance evaluation for on-line analytical systems 天然气 在线分析系统性能评价 |
China National Standards M |
English PDF |
| GB/T 27894.5-2012 |
Natural gas - DeterMination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen,carbon dioxideand C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns 天然气 在一定不确定度下用气相色谱法测定组成 第5部分：实验室和在线工艺系统中用三根色谱柱测定氮、二氧化碳和C1至C5及C6+的烃类 |
China National Standards M |
English PDF |
| GB/T 27894.4-2012 |
Natural gas - DeterMination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen,carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns 天然气 在一定不确定度下用气相色谱法测定组成 第4部分：实验室和在线测量系统中用两根色谱柱测定氮、二氧化碳和C1至C5及C6+的烃类 |
China National Standards M |
English PDF |
| GB/T 19876-2012 |
Safety of Machinery ― Positioning of safeguards with respect to the approach speeds of parts of the human body 机械安全 与人体部位接近速度相关的安全防护装置的定位 |
China National Standards M |
English PDF |
| GB/T 19869.2-2012 |
Welding procedure qualification test for aluMinum and its alloys 铝及铝合金的焊接工艺评定试验 |
China National Standards M |
English PDF |
| GB/T 18517-2012 |
TerMinology of refrigeration 制冷术语 |
China National Standards M |
English PDF |
| Find out:46298Items | To Page of: First -Previous-Next -Last | [234] [235] [236] [237] [238] [239] [240] |
+86-755-25831330
