GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 23590-2009 |
PraseodyMium-neodymium fluoride 氟化镨钕 |
China National Standards M |
English PDF |
GB/T 23589-2009 |
GadoliniuM oxalate 草酸钆 |
China National Standards M |
English PDF |
GB/T 23588-2009 |
Scraps of neodyMium iron boron 钕铁硼废料 |
China National Standards M |
English PDF |
GB/T 16482-2009 |
YttriuM-europium oxide-phosphor grade 荧光级氧化钇铕 |
China National Standards M |
English PDF |
GB/T 13560-2009 |
Materials for sintered neodymium iron boron permanent magnets 烧结钕铁硼永磁材料 |
China National Standards M |
English PDF |
GB/T 12144-2009 |
TerbiuM oxide 氧化铽 |
China National Standards M |
English PDF |
GB/T 6409.2-2009 |
Superabrasives - DiaMond or cubic boron nitride grinding tools - Shapes and dimensions 超硬磨料制品 金刚石或立方氮化硼磨具 形状和尺寸 |
China National Standards M |
English PDF |
GB/T 2481.2-2009 |
Bonded abrasives - DeterMination and designation of grain size distribution - Part 2: Microgrits 固结磨具用磨料 粒度组成的检测和标记 第2部分:微粉 |
China National Standards M |
English PDF |
GB/T 23538-2009 |
Conventional abrasive - Testing Method for toughness ( Ball mill method ) 普通磨料 球磨韧性测定方法 |
China National Standards M |
English PDF |
GB/T 23537-2009 |
Superabrasives - LiMit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride and mounted points 超硬磨料制品 金刚石或立方氮化硼砂轮和磨头 极限偏差和圆跳动公差 |
China National Standards M |
English PDF |
GB/T 23536-2009 |
Superabrasive - Types of synthetic diaMond 超硬磨料 人造金刚石品种 |
China National Standards M |
English PDF |
GB/T 21944.2-2009 |
Special products of silicon carbide - Kiln furniture of reaction bonded silicon carbide - Part 2:Special beaM 碳化硅特种制品 反应烧结碳化硅窑具 第2部分:异型梁 |
China National Standards M |
English PDF |
GB/T 20316.1-2009 |
Abrasive grains - DeterMination of bulk density - Part 1: Macrogrits 普通磨料 堆积密度的测定 第1部分:粗磨粒 |
China National Standards M |
English PDF |
GB/T 16458-2009 |
TerMinology for abrasives and abrasive products 磨料磨具术语 |
China National Standards M |
English PDF |
GB/T 16457.2-2009 |
Blanks for superabrasive cutting-off wheels - DiMensions - Part 2:Hand-held cutting-off in building and civil engineering 超硬材料锯片基体尺寸 第2部分:用于建筑物和土木工程材料的手持切割 |
China National Standards M |
English PDF |
GB/T 16457.1-2009 |
Blanks for superabrasive cutting-off wheels - DiMensions - Part 1:Manually guided cutting-off in building and civil engineering 超硬材料锯片基体尺寸 第1部分:用于建筑物和土木工程材料的机械切割 |
China National Standards M |
English PDF |
GB/T 15305.3-2009 |
Coated abrasives - Abrasive belts - Selection of width/length coMbinations 涂附磨具 砂带 宽度与长度组合的选择 |
China National Standards M |
English PDF |
GB/T 23599-2009 |
Pure culture of straw Mushroom 草菇菌种 |
China National Standards M |
English PDF |
GB/T 17494-2009 |
Diagnostic techniques of indirect ELISA technique for equine infectious aneMia disease 马传染性贫血病间接ELISA诊断技术 |
China National Standards M |
English PDF |
GB/T 13835.9-2009 |
Test Method for rabbit hair - Part 9: Crimp properties 兔毛纤维试验方法 第9部分:卷曲性能 |
China National Standards M |
English PDF |
GB/T 13835.8-2009 |
Test Method for rabbit hair - Part 8: Extractable matter by ether 兔毛纤维试验方法 第8部分:乙醚萃取物含量 |
China National Standards M |
English PDF |
GB/T 13835.7-2009 |
Test Method for rabbit hair - Part 7: Whiteness 兔毛纤维试验方法 第7部分:白度 |
China National Standards M |
English PDF |
GB/T 13835.6-2009 |
Test Method for rabbit hair - Part 6: Diameter - Projection microscope method 兔毛纤维试验方法 第6部分:直径 投影显微镜法 |
China National Standards M |
English PDF |
GB/T 13835.5-2009 |
Test Method for rabbit hair - Part 5: Breaking tenacity and elongation at break of single fibre 兔毛纤维试验方法 第5部分:单纤维断裂强度和断裂伸长率 |
China National Standards M |
English PDF |
GB/T 13835.4-2009 |
Test Method for rabbit hair - Part 4: Moisture regain - Drying oven method 兔毛纤维试验方法 第4部分:回潮率 烘箱法 |
China National Standards M |
English PDF |
GB/T 13835.3-2009 |
Test Method for rabbit hair - Part 3: Percentage of foreign matter,coarse hair and loosen hair 兔毛纤维试验方法 第3部分:含杂率、粗毛率和松毛率 |
China National Standards M |
English PDF |
GB/T 13835.2-2009 |
Test Method for rabbit hair - Part 2: Average length and percentage of short hair - Hand-arrange method 兔毛纤维试验方法 第2部分:平均长度和短毛率 手排法 |
China National Standards M |
English PDF |
GB/T 13835.1-2009 |
Test Method for rabbit hair - Part 1: Sampling 兔毛纤维试验方法 第1部分:取样 |
China National Standards M |
English PDF |
GB/T 23491-2009 |
Acceptance guide for processing technique and equipMent of feed enterprise 饲料企业生产工艺及设备验收指南 |
China National Standards M |
English PDF |
GB 3883.18-2009 |
Safety of hand held Motor-operated electric tools - Part 2: Particular requirements for tile saws 手持式电动工具的安全 第二部分:石材切割机的专用要求 |
China National Standards M |
English PDF |
GB 16895.7-2009 |
Low-voltage electrical installations - Part 7-704: RequireMents for special installations or locations - Construction and demolition site installations 低压电气装置 第7-704部分:特殊装置或场所的要求 施工和拆除场所的电气装置 |
China National Standards M |
English PDF |
GB 13960.4-2009 |
Safety of transportable Motor-operated electric tools - Part 2: Particular requirements for planers and thicknessers 可移式电动工具的安全 第二部分:平刨和厚度刨的专用要求 |
China National Standards M |
English PDF |
GB 13960.10-2009 |
Safety of transportable Motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders 可移式电动工具的安全 第二部分:单轴立式木铣的专用要求 |
China National Standards M |
English PDF |
GB 23712-2009 |
Electrical equipMent of industrial machines - Electromagnetic compatibility - Emission limits for machine tools 工业机械电气设备 电磁兼容 机床发射限值 |
China National Standards M |
English PDF |
GB/T 5326-2009 |
CoMbed printed or dyed polyester/cotton blended fabrics 精梳涤棉混纺印染布 |
China National Standards M |
English PDF |
GB/T 5325-2009 |
CoMbed polyester/cotton grey fabrics 精梳涤棉混纺本色布 |
China National Standards M |
English PDF |
GB/T 5324-2009 |
CoMbed polyester/cotton blended grey yarn 精梳涤棉混纺本色纱线 |
China National Standards M |
English PDF |
GB/T 4666-2009 |
Textiles - Fabrics - DeterMination of width and length 纺织品 织物长度和幅宽的测定 |
China National Standards M |
English PDF |
GB/T 22863-2009 |
SeMi-worsted fabric 半精纺毛织品 |
China National Standards M |
English PDF |
GB/T 22862-2009 |
Sea-island filaMent fabrics 海岛丝织物 |
China National Standards M |
English PDF |
GB/T 22860-2009 |
Classing, naMing and coding of silk (woven fabric) 丝绸(机织物)的分类、命名及编号 |
China National Standards M |
English PDF |
GB/T 22859-2009 |
Dyed Mulberry thrown silk 染色桑蚕捻线丝 |
China National Standards M |
English PDF |
GB/T 22857-2009 |
Mulberry thrown silk on cones 筒装桑蚕捻线丝 |
China National Standards M |
English PDF |
GB/T 22856-2009 |
GaMbiered canton silk 莨绸 |
China National Standards M |
English PDF |
GB/T 22854-2009 |
Knitted school uniforM 针织学生服 |
China National Standards M |
English PDF |
GB/T 22852-2009 |
Knitted swiMwear fabric 针织泳装面料 |
China National Standards M |
English PDF |
GB/T 22846-2009 |
Test Methods of four points system for visually inspecting knitted fabrics 针织布(四分制)外观检验 |
China National Standards M |
English PDF |
GB/T 22844-2009 |
Matched bedding 配套床上用品 |
China National Standards M |
English PDF |
GB/T 22799-2009 |
Test Method for hydroscopicity of towel product 毛巾产品吸水性测试方法 |
China National Standards M |
English PDF |
GB/T 22798-2009 |
Test Method for fiber fall off of towel product 毛巾产品脱毛率测试方法 |
China National Standards M |
English PDF |
GB/T 17760-2009 |
Method of inspection for printed or dyed fabric surface defects 印染布布面疵点检验方法 |
China National Standards M |
English PDF |
GB/T 17759-2009 |
Method of inspection for grey fabric surface defects 本色布布面疵点检验方法 |
China National Standards M |
English PDF |
GB/T 23646-2009 |
Fuel cell power systeM for electric bicycles - Technical specification 电动自行车用燃料电池发电系统 技术条件 |
China National Standards M |
English PDF |
GB/T 23645-2009 |
Test Methods of fuel cell power system for passenger cars 乘用车用燃料电池发电系统测试方法 |
China National Standards M |
English PDF |
GB/T 23644-2009 |
General specifications for electrical special equipMent 电工专用设备通用技术条件 |
China National Standards M |
English PDF |
GB/T 23643-2009 |
High speed braiding Machine for wire and cable 电线电缆用高速编织机 |
China National Standards M |
English PDF |
GB/T 23642-2009 |
Electrical insulating Materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses 电气绝缘材料和系统 瞬时上升和重复冲击电压条件下的局部放电(PD)电气测量 |
China National Standards M |
English PDF |
GB/T 23641-2009 |
Fiber reinforced unsaturated polyester Moulding-compounds(SMC and BMC)for electrical purposes 电气用纤维增强不饱和聚酯模塑料(SMC/BMC) |
China National Standards M |
English PDF |
GB/T 23640-2009 |
AC generators for reciprocating internal coMbustion(RIC) engine driven generating sets 往复式内燃机(RIC)驱动的交流发电机 |
China National Standards M |
English PDF |
GB/T 23639-2009 |
Energy conservation and corrosion-resistant steel-Madecable support system 节能耐腐蚀钢制电缆桥架 |
China National Standards M |
English PDF |
GB/T 23638-2009 |
Lead-acid batteries for Motorcycles 摩托车用铅酸蓄电池 |
China National Standards M |
English PDF |
GB/T 23637-2009 |
Master controller in ships 船用主令控制器 |
China National Standards M |
English PDF |
GB/T 20936.3-2009 |
Electrical apparatus for the detection and Measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air 可燃性气体探测用电气设备 第3部分:显示空气中甲烷体积含量至100%的I类探测器的性能要求 |
China National Standards M |
English PDF |
GB/T 20042.5-2009 |
Proton exchange Membrane fuel cell - Part 5: Test method for membrane electrode assembly 质子交换膜燃料电池 第5部分:膜电极测试方法 |
China National Standards M |
English PDF |
GB/T 20042.4-2009 |
Proton exchange Membrane fuel cell - Part 4: Test method for electrocatalysts 质子交换膜燃料电池 第4部分:电催化剂测试方法 |
China National Standards M |
English PDF |
GB/T 20042.3-2009 |
Proton exchange Membrane fuel cell - Part 3: Test method for proton exchange membrane 质子交换膜燃料电池 第3部分:质子交换膜测试方法 |
China National Standards M |
English PDF |
GB/T 13539.4-2009 |
Low-voltage fuses - Part 4: SuppleMentary requirements for fuse-links for the protection of semiconductor devices 低压熔断器 第4部分:半导体设备保护用熔断体的补充要求 |
China National Standards M |
English PDF |
GB/T 23690-2009 |
Procedure for the declaration of Materials in products of the electrotechnical and electronic industry 电子电气产品材料声明程序 |
China National Standards M |
English PDF |
GB/T 23689-2009 |
Guide of environMentally conscious declaration for ICT & CE products 信息通信技术和消费电子产品环境意识设计声明导则 |
China National Standards M |
English PDF |
GB/T 23687-2009 |
Guide of environMentally conscious design for ICT & CE products 信息通信技术和消费电子产品的环境意识设计导则 |
China National Standards M |
English PDF |
GB/T 23686-2009 |
EnvironMentally conscious design guide for electrical and electronic products 电子电气产品的环境意识设计导则 |
China National Standards M |
English PDF |
GB/T 23685-2009 |
General technical specifications of recovering for waste electrical and electronic equipMent 废电器电子产品回收利用通用技术要求 |
China National Standards M |
English PDF |
GB/T 23684-2009 |
Method of testing liquid line refrigerant driers 液管制冷剂干燥器的试验方法 |
China National Standards M |
English PDF |
GB/T 23683-2009 |
Method of testing flow capacity of refrigerant capillary tubes 制冷剂毛细管流量的试验方法 |
China National Standards M |
English PDF |
GB/T 23682-2009 |
Refrigerating systeMs and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation 制冷系统和热泵 软管件、隔震管和膨胀接头 要求、设计与安装 |
China National Standards M |
English PDF |
GB/T 23681-2009 |
Refrigerating systeMs and heat pumps - System flow diagrams and piping instrument diagrams - Layout and symbols 制冷系统和热泵 系统流程图和管路仪表图 绘图与符号 |
China National Standards M |
English PDF |
GB/T 23680-2009 |
Method of testing desiccants for refrigerant drying 制冷剂用干燥剂的试验方法 |
China National Standards M |
English PDF |
GB/T 23648-2009 |
Guideline of earthquake eMergency response and rescue for community volunteer 社区志愿者地震应急与救援工作指南 |
China National Standards M |
English PDF |
GB/T 23647-2009 |
General specification for self-service terMinal 自助服务终端通用规范 |
China National Standards M |
English PDF |
GB 10408.6-2009 |
CoMbined passive infrared and microwave detector 微波和被动红外复合入侵探测器 |
China National Standards M |
English PDF |
GB/T 6609.37-2009 |
CheMical analysis methods and determination of physical performance of alumina - Part 37: Determination of the particles size content less then 20μm 氧化铝化学分析方法和物理性能测定方法 第37部分:粒度小于20μm颗粒含量的测定 |
China National Standards M |
English PDF |
GB/T 6609.36-2009 |
CheMical analysis methods and determination of physical performance of alumina - Part 36: Determination of flow time 氧化铝化学分析方法和物理性能测定方法 第36部分:流动时间的测定 |
China National Standards M |
English PDF |
GB/T 6609.35-2009 |
CheMical analysis methods and determination of physical performance of alumina - Part 35: Determination of specific surface area by nitrogen adsorption 氧化铝化学分析方法和物理性能测定方法 第35部分:比表面积的测定 氮吸附法 |
China National Standards M |
English PDF |
GB/T 6609.34-2009 |
CheMical analysis methods and determination of physical performance of alumina - Part 34: Method of calculating alumina content 氧化铝化学分析方法和物理性能测定方法 第34部分:三氧化二铝含量的计算方法 |
China National Standards M |
English PDF |
GB/T 6609.33-2009 |
CheMical analysis methods and determination of physical performance of alumina - Part 33: Determination of attrition index 氧化铝化学分析方法和物理性能测定方法 第33部分:磨损指数的测定 |
China National Standards M |
English PDF |
GB/T 6609.32-2009 |
CheMical analysis methods and determination of physical performance of alumina - Part 32: Determination of a-alumina content by X-ray diffraction 氧化铝化学分析方法和物理性能测定方法 第32部分:a-三氧化二铝含量的测定 X-射线衍射法 |
China National Standards M |
English PDF |
GB/T 6609.31-2009 |
CheMical analysis methods and determination of physical performance of alumina - Part 31: Determination of angle of flow 氧化铝化学分析方法和物理性能测定方法 第31部分:流动角的测定 |
China National Standards M |
English PDF |
GB/T 6609.30-2009 |
CheMical analysis methods and determination of physical performance of alumina - Part 30: X-ray fluorescence spectrometric method for the determination centent of trace elements 氧化铝化学分析方法和物理性能测定方法 第30部分:X射线荧光光谱法测定微量元素含量 |
China National Standards M |
English PDF |
GB/T 6609.27-2009 |
CheMical analysis methods and determination of physical performance of alumina - Part 27: Partical size analysis - Method using electriformed sieves 氧化铝化学分析方法和物理性能测定方法 第27部分:粒度分析 筛分法 |
China National Standards M |
English PDF |
GB/T 6609.2-2009 |
CheMical analysis methods and determination of physical performance of aluminium hydroxide - Part 2: Determination of loss of mass at 300℃ and 1000℃ 氧化铝化学分析方法和物理性能测定方法 第2部分:300℃和1000℃质量损失的测定 |
China National Standards M |
English PDF |
GB/T 23615.1-2009 |
Accessorial Material for architectural aluminum alloy profiles - Part 1: Thermal barrier strip of polyamide 铝合金建筑型材用辅助材料 第1部分:聚酰胺隔热条 |
China National Standards M |
English PDF |
GB/T 23614.2-2009 |
CheMical analysis methods for titanium nickel shape memory alloy - Part 2: Determination of cobalt, copper, chromium, iron, niobium content - Inductively coupled plasma atomic emission spectrometry 钛镍形状记忆合金化学分析方法 第2部分:钴、铜、铬、铁、铌量的测定 电感耦合等离子体发射光谱法 |
China National Standards M |
English PDF |
GB/T 23614.1-2009 |
Methods for chemical analysis of titanium nickel shape memory alloy - Part 1: Determination of nickel content - Dimethylglyoxime precipitate separatioin-EDTA complex-zinc chloride back titration 钛镍形状记忆合金化学分析方法 第1部分:镍量的测定 丁二酮肟沉淀分离-EDTA络合-氯化锌返滴定法 |
China National Standards M |
English PDF |
GB/T 23613-2009 |
Methods for chemical analysis of osmium powder - Determination of magnesium, iron, nickel, aluminum, copper, silver, gold, platinum, iridium, palladium, rhodium and silicon content - Inductively coupled plasma atomic emission spectrometry 锇粉化学分析方法 镁、铁、镍、铝、铜、银、金、铂、铱、钯、铑、硅量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards M |
English PDF |
GB/T 23612-2009 |
Anodizing and electrophoretic painting technical specification on wrought aluMinium alloy extruded profiles for architecture 铝合金建筑型材阳极氧化与阳极氧化电泳涂漆工艺技术规范 |
China National Standards M |
English PDF |
GB/T 23609-2009 |
SeaMless copper alloy tube for water desalting applications 海水淡化装置用铜合金无缝管 |
China National Standards M |
English PDF |
GB/T 23608-2009 |
PlatinuM groups metals waste classification and technology qualification 铂族金属废料分类和技术条件 |
China National Standards M |
English PDF |
GB/T 23607-2009 |
Methods for chemical analysis of copper anode mud - Determination of arsenic,bismuth,iron,nickel,lead,antimony,selenium and tellurium content - Inductively coupled plasma-atomic emission spectrometry 铜阳极泥化学分析方法 砷、铋、铁、镍、铅、锑、硒、碲量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards M |
English PDF |
GB/T 23606-2009 |
Copper-hydrogen eMbrittlement test method 铜氢脆检验方法 |
China National Standards M |
English PDF |
GB/T 23605-2009 |
Method for β transus temperature determination of titanium alloys 钛合金β转变温度测定方法 |
China National Standards M |
English PDF |
Find out:46298Items | To Page of: First -Previous-Next -Last | [301] [302] [303] [304] [305] [306] [307] |