China National Standards

China M GB Standards English PDF List


GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards;  We provide Chinese GB standards and English version GB standards  Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.
  •  China "M" GB Standards English PDF List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 18274-2000 Technical specifications for Motor vehicle drum brake being overhauled
    汽车鼓式制动器修理技术条件
    China National Standards
    M

    English PDF
    GB/T 18273-2000 PetroleuM and liquid petroleum products--Direct static measurements--Contents ofvertical storage tanks--Mass measurement by hydrostatic tank gauging
    石油和液体石油产品 立式罐内油量的直接静态测量法 (HTG质量测量法)
    China National Standards
    M

    English PDF
    GB 9706.20-2000 Medical electrical equipment--Part 2:Particular requirements for the safety of diagnostic andtherapeutic laser equipment
    医用电气设备 第2部分:诊断和治疗激光设备安全专用要求
    China National Standards
    M

    English PDF
    GB 18282.1-2000 Sterilization of health care products--CheMical indicators--Part 1:General requirements
    医疗保健产品灭菌 化学指示物 第1部分:通则
    China National Standards
    M

    English PDF
    GB 18281.3-2000 Sterilization of health care products--Biological indicators--Part 3:Biological indicators for Moist heat sterilization
    医疗保健产品灭菌 生物指示物 第3部分:湿热灭菌用生物指示物
    China National Standards
    M

    English PDF
    GB 18280-2000 Sterilization of healthcare products--RequireMent for validation and routine control--Radiation sterilization
    医疗保健产品灭菌 确认和常规控制要求 辐射灭菌
    China National Standards
    M

    English PDF
    GB 18279-2000 Medical devices--Validation androutine control of ethylene oxide sterilization
    医疗器械 环氧乙烷灭菌 确认和常规控制
    China National Standards
    M

    English PDF
    GB 18278-2000 Sterilization of health care products--RequireMents for validation and routine control--Industrial moist heat sterilization
    医疗保健产品灭菌 确认和常规控制要求 工业湿热灭菌
    China National Standards
    M

    English PDF
    GB/T 16895.9-2000 Electrical installations of buildings--Part 7:RequireMents for special installations or locations--Section 707:Earthing requirements for the electrical installation of data processing equipment
    建筑物电气装置 第7部分:特殊装置或场所的要求 第707节:数据处理设备用电气装置的接地要求
    China National Standards
    M

    English PDF
    GB/T 15153.2-2000 Telecontrol equipMent and systems--Part 2:Operating conditions--Section 2:Environmental conditions (cli-matic,mechanical and other non-electrical influences)
    远动设备及系统 第2部分:工作条件 第2篇:环境条件(气候、机械和其他非电影响因素)
    China National Standards
    M

    English PDF
    GB/T 18291-2000 Mongolian terminology work--Principles and methods
    蒙古语术语工作 原则与方法
    China National Standards
    M

    English PDF
    GB/T 15238-2000 TerMinology work--Basic lexicographical terminology
    术语工作 辞书编纂基本术语
    China National Standards
    M

    English PDF
    GB/T 12162.1-2000 X and gaMma reference radiation for calibrating dose meters and doserate meters and for determining their response as a function of photon energy--Part 1:Radiation characteristics and production methods
    用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 第1部分:辐射特性及产生方法
    China National Standards
    M

    English PDF
    GB/T 4588.12-2000 Specification for Mass laminationpanels (semi-manufactured multilayer printed boards)
    预制内层层压板规范(半制成多层印制板)
    China National Standards
    M

    English PDF
    GB/T 17737.2-2000 Radio-frequency cables--Part 2:Sectional specification for seMi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene(PTFE) insulation
    射频电缆 第2部分:聚四氟乙烯(PTFE)绝缘半硬射频同轴电缆分规范
    China National Standards
    M

    English PDF
    GB/T 18272.5-2000 Industrial-process Measurement and control--Evaluation of system properties for the purpose of system assessment--Part 5:Assessment of system dependability
    工业过程测量和控制 系统评估中系统特性的评定 第5部分:系统可信性评估
    China National Standards
    M

    English PDF
    GB/T 18272.3-2000 Industrial-process Measurement and control--Evaluation of system properties for the purpose of system assessment--Part 3:Assessment of system function-ality
    工业过程测量和控制 系统评估中系统特性的评定 第3部分:系统功能性评估
    China National Standards
    M

    English PDF
    GB/T 18272.2-2000 Industrial-process Measurement and control--Evaluation of system properties for the purpose of system assessment--Part 2:Assessment methodology
    工业过程测量和控制 系统评估中系统特性的评定 第2部分:评估方法学
    China National Standards
    M

    English PDF
    GB/T 18272.1-2000 Industrial-process Measurement and control--Evaluation of system properties for the purpose of system assessment--Part 1:General consideration and methodology
    工业过程测量和控制 系统评估中系统特性的评定 第1部分:总则和方法学
    China National Standards
    M

    English PDF
    GB/T 18271.4-2000 Process Measurement and control devices--General methods and procedures for evaluating performance--Part 4:Evaluation report content
    过程测量和控制装置 通用性能评定方法和程序 第4部分:评定报告的内容
    China National Standards
    M

    English PDF
    GB/T 18271.3-2000 Process Measurement and control devices--General methods and procedures for evaluating performance--Part 3:Tests for the effects of influence quantities
    过程测量和控制装置 通用性能评定方法和程序 第3部分:影响量影响的试验
    China National Standards
    M

    English PDF
    GB/T 18271.2-2000 Process Measurement and control devices--General methods and procedures for evaluating performance--Part 2:Tests under reference conditions
    过程测量和控制装置 通用性能评定方法和程序 第2部分:参比条件下的试验
    China National Standards
    M

    English PDF
    GB/T 18271.1-2000 Process Measurement and control devices--General methods and procedures for evaluating performance--Part 1:General considerations
    过程测量和控制装置 通用性能评定方法和程序 第1部分:总则
    China National Standards
    M

    English PDF
    GB/T 17214.3-2000 Operating conditions for industrial-process Measurement and control equipment--Part 3:Mechanical influences
    工业过程测量和控制装置的工作条件 第3部分:机械影响
    China National Standards
    M

    English PDF
    GB/T 18266.1-2000 Ranking standard for gyMnasium and playground--Part 1:Star-rating standard for bowling playground
    体育场所等级的划分 第1部分:保龄球馆星级的划分及评定
    China National Standards
    M

    English PDF
    GB 18265-2000 Operation conditions and technical requireMents for enterprises handling dangerous chemicals business
    危险化学品经营企业开业条件和技术要求
    China National Standards
    M

    English PDF
    GB/T 5051-2000 General technical conditions for the particle forMing machine
    刨花铺装机通用技术条件
    China National Standards
    M

    English PDF
    GB/T 18263-2000 Wood-based panel Machinery--Hot presses for terminology
    人造板机械 热压机术语
    China National Standards
    M

    English PDF
    GB/T 18262-2000 General specifications for wood-based panel Mach-inery
    人造板机械通用技术条件
    China National Standards
    M

    English PDF
    GB/T 18258-2000 DaMping materials--Testing method for damping properties
    阻尼材料 阻尼性能测试方法
    China National Standards
    M

    English PDF
    GB/T 18251-2000 Method for the assessment of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds
    聚烯烃管材、管件和混配料中颜料或炭黑分散的测定方法
    China National Standards
    M

    English PDF
    GB/T 6398-2000 Standard test Method for fatigue crack growth rates of metallic materials
    金属材料疲劳裂纹扩展速率试验方法
    China National Standards
    M

    English PDF
    GB/T 4513-2000 Classification of unshaped refractory Materials
    不定形耐火材料分类
    China National Standards
    M

    English PDF
    GB/T 2997-2000 Test Method for bulk density,apparent porosity and true porosity of dense shaped refractory products
    致密定形耐火制品 体积密度、显气孔率和真气孔率 试验方法
    China National Standards
    M

    English PDF
    GB/T 18257-2000 Refractory bricks for use in rotary kilns--Hot-face identification Marking
    回转窑用耐火砖热面标记
    China National Standards
    M

    English PDF
    GB/T 18256-2000 Welded steel tubes(except subMerged arc-welded)--Ultrasonic testing for verification of hydraulic leak-tightness
    焊接钢管(埋弧焊除外) 用于确认水压密实性的超声波检测方法
    China National Standards
    M

    English PDF
    GB/T 18255-2000 Coking viscous oil products--DeterMination ofdistillation range
    焦化粘油类产品馏程的测定
    China National Standards
    M

    English PDF
    GB/T 18253-2000 Steel and steel products--Types of inspection docuMents
    钢及钢产品 检验文件的类型
    China National Standards
    M

    English PDF
    GB/T 18250-2000 Test Method for performance in plane deformation of curtain wall’s
    建筑幕墙平面内变形性能检测方法
    China National Standards
    M

    English PDF
    GB/T 18247.7-2000 Product grade for Major ornamental plants--Part 7:Turf
    主要花卉产品等级 第7部分:草坪
    China National Standards
    M

    English PDF
    GB/T 18247.6-2000 Product grade for Major ornamental plants--Part 6:Flower bulbs
    主要花卉产品等级 第6部分:花卉种球
    China National Standards
    M

    English PDF
    GB/T 18247.5-2000 Product grade for Major ornamental plants--Part 5:Young plants
    主要花卉产品等级 第5部分:花卉种苗
    China National Standards
    M

    English PDF
    GB/T 18247.4-2000 Product grade for Major ornamental plants--Part 4:Flower seeds
    主要花卉产品等级 第4部分:花卉种子
    China National Standards
    M

    English PDF
    GB/T 18247.3-2000 Product grade for Major ornamental plants--Part 3:Foliage potted plants
    主要花卉产品等级 第3部分:盆栽观叶植物
    China National Standards
    M

    English PDF
    GB/T 18247.2-2000 Product grade for Major ornamental plants--Part 2:Flowering potted plants
    主要花卉产品等级 第2部分:盆花
    China National Standards
    M

    English PDF
    GB/T 18247.1-2000 Product grade for Major ornamental plants--Part 1:Cut flowers
    主要花卉产品等级 第1部分:鲜切花
    China National Standards
    M

    English PDF
    GB/T 3682-2000 DeterMination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
    热塑性塑料熔体质量流动速率和熔体体积流动速率的测定
    China National Standards
    M

    English PDF
    GB/T 18244-2000 Test Methods for resistance to weathering of building waterproofing materials
    建筑防水材料老化试验方法
    China National Standards
    M

    English PDF
    GB/T 18241.3-2000 Rubber lining--Part 3:Lining for floatation Machine
    橡胶衬里 第3部分:浮选机衬里
    China National Standards
    M

    English PDF
    GB/T 18241.2-2000 Rubber lining--Part 2:Lining for grinding Mills
    橡胶衬里 第2部分:磨机衬里
    China National Standards
    M

    English PDF
    GB 18245-2000 Safety regulation for dust explosion intobacco processing systeM
    烟草加工系统 粉尘防爆安全规程
    China National Standards
    M

    English PDF
    GB 10501-2000 CarbendaziM technical
    多菌灵原药
    China National Standards
    M

    English PDF
    GB/T 4334.6-2000 Method of 5 percent sulfuric acid test for stainless steels
    不锈钢 5%硫酸腐蚀试验方法
    China National Standards
    M

    English PDF
    GB/T 3090-2000 Stainless steel sMall diameter seamless steel tubes
    不锈钢小直径无缝钢管
    China National Standards
    M

    English PDF
    GB/T 223.78-2000 Methods for chemical analysis of iron,steel and alloy--Curcumin spectrophotometric method for the determination of boron content
    钢铁及合金化学分析方法 姜黄素直接光度法测定硼含量
    China National Standards
    M

    English PDF
    GB/T 223.34-2000 Methods for chemical analysis of iron,steel and alloy--The determination of hydrochloric acid-insoluble content of iron powders
    钢铁及合金化学分析方法 铁粉中盐酸不溶物的测定
    China National Standards
    M

    English PDF
    GB/T 18249-2000 Ferroalloys--ExperiMental methods for checking the bias of sampling and sample preparation
    检查铁合金取样和制样偏差的试验方法
    China National Standards
    M

    English PDF
    GB/T 15970.4-2000 Corrosion of Metals and alloys--Stress corrosion testing--Part 4:Preparation and use of uniaxially loaded tension specimens
    金属和合金的腐蚀 应力腐蚀试验 第4部分:单轴加载拉伸试样的制备和应用
    China National Standards
    M

    English PDF
    GB/T 15970.2-2000 Corrosionof Metals and alloys--Stress corrosion testing--Part 2:Preparation and use of bent-beam specimens
    金属和合金的腐蚀 应力腐蚀试验 第2部分:弯梁试样的制备和应用
    China National Standards
    M

    English PDF
    GB/T 6769-2000 Regulations governing the layout of driver’s cabs of locoMotives
    机车司机室布置规则
    China National Standards
    M

    English PDF
    GB/T 3367.8-2000 Glossary of terMs for railway locomotive--Terms of hydraulic transmission
    铁道机车名词术语 液力传动术语
    China National Standards
    M

    English PDF
    GB/T 3367.7-2000 Glossary of terMs for railway locomotive--Terms of diesel engine
    铁道机车名词术语 柴油机术语
    China National Standards
    M

    English PDF
    GB/T 3367.6-2000 Glossary of terMs for railway locomotive--Terms of diesel locomotive
    铁道机车名词术语 内燃机车术语
    China National Standards
    M

    English PDF
    GB/T 3367.5-2000 Glossary of terMs for railwaylocomotive--Names of component parts for air brake equipment
    铁道机车名词术语 空气制动装置零部件名词
    China National Standards
    M

    English PDF
    GB/T 3367.4-2000 Glossary of terMsfor railway locomotive--Names of component parts for diesel locomotive body andbogie
    铁道机车名词术语 内燃机车车体和转向架零部件名词
    China National Standards
    M

    English PDF
    GB/T 3367.3-2000 Glossary of terMs for railway locomotive--Names of component parts for diesel locomotive auxiliary device
    铁道机车名词术语 内燃机车辅助装置零部件名词
    China National Standards
    M

    English PDF
    GB/T 3367.2-2000 Glossary of terMs for railwaylocomotive--Names of component parts for hydraulic transmission system
    铁道机车名词术语 液力传动系统零部件名词
    China National Standards
    M

    English PDF
    GB/T 3367.1-2000 Glossary of terMs for railway locomotive--Names of component parts for diesel engine
    铁道机车名词术语 柴油机零部件名词
    China National Standards
    M

    English PDF
    GB/T 6588-2000 SeMiconductor devices--Discrete devices--Part 3:Signal(including switching) and regulator diodes--Section One--Blank detail specification for signal diodes,switching diodes and controlled-avalanche diodes
    半导体器件 分立器件 第3部分:信号(包括开关)和调整二极管 第1篇 信号二极管、开关二极管和可控雪崩二极管空白详细规范
    China National Standards
    M

    English PDF
    GB/T 18221-2000 InforMation technology--Programming languages,their environments and system software interfaces--Language-independent datatypes
    信息技术 程序设计语言、环境与系统软件接口 独立于语言的数据类型
    China National Standards
    M

    English PDF
    GB/T 17975.9-2000 InforMation technology--Generic coding of moving pictures and associated audio information--Part 9:Extension for real time interface for systems decoders
    信息技术 运动图像及其伴音信息的通用编码 第9部分:系统解码器的实时接口扩展
    China National Standards
    M

    English PDF
    GB/T 16649.7-2000 Identification cards--Integrated circuit(s) cards with contacts--Part 7:Interindustry coMmands for Structured Card Query Language(SCQL)
    识别卡 带触点的集成电路卡 第7部分:用于结构化卡查询语言(SCQL)的行业间命令
    China National Standards
    M

    English PDF
    GB 13836-2000 Cabled distributionsysteMs for television and sound signals--Part 2:Electromagnetic compatibility of equipment
    电视和声音信号电缆分配系统 第2部分:设备的电磁兼容
    China National Standards
    M

    English PDF
    GB/T 9813-2000 Generic specification for Microcomputers
    微型计算机通用规范
    China National Standards
    M

    English PDF
    GB/T 18238.1-2000 InforMation technology--Security techniques--Hash-function--Part 1:General
    信息技术 安全技术 散列函数 第1部分:概述
    China National Standards
    M

    English PDF
    GB/T 18237.3-2000 InforMation technology--Open Systems Interconnection--Generic upper layers security--Part 3:Security Exchange Service Element(SESE) protocol specification
    信息技术 开放系统互连 通用高层安全 第3部分:安全交换服务元素(SESE)协议规范
    China National Standards
    M

    English PDF
    GB/T 18237.2-2000 InforMation technology--Open Systems Interconnection--Generic upper layers security--Part 2:Security Exchange Service Element(SESE)service definition
    信息技术 开放系统互连 通用高层安全 第2部分:安全交换服务元素(SESE)服务定义
    China National Standards
    M

    English PDF
    GB/T 18237.1-2000 InforMation technology--Open Systems Interconnection--Generic upper layers security--Part 1:Overview, models and notation
    信息技术 开放系统互连 通用高层安全 第1部分:概述、模型和记法
    China National Standards
    M

    English PDF
    GB/T 18236.1-2000 InforMation technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Common specifications--Part 1:Medium Access Control(MAC)service definition
    信息技术 系统间远程通信和信息交换 局域网和城域网 公共规范 第1部分:媒体访问控制(MAC)服务定义
    China National Standards
    M

    English PDF
    GB/T 18235.1-2000 InforMation technology--High-Performance Parallel Interface--Part 1:Mechanical,electrical and signaling protocol specification (HIPPI-PH)
    信息技术 高性能并行接口 第1部分:机械、电气及信号协议规范(HIPPI-PH)
    China National Standards
    M

    English PDF
    GB/T 18234-2000 InforMation technology--Guideline for the evaluation and selection of CASE tools
    信息技术 CASE工具的评价与选择指南
    China National Standards
    M

    English PDF
    GB/T 18232-2000 InforMation technology--Computer graphics and image processing--Procedures for registration of graphical items
    信息技术 计算机图形和图像处理 图形项的登记规程
    China National Standards
    M

    English PDF
    GB/T 18231-2000 InforMation technology--Lower layers security model
    信息技术 低层安全模型
    China National Standards
    M

    English PDF
    GB/T 18225-2000 TerMinology for passenger transport by water
    水路客运术语
    China National Standards
    M

    English PDF
    GB/T 18223-2000 Woodworking Machines--Lifting tables and stages--Nomenclature
    木工机床 升降台 术语
    China National Standards
    M

    English PDF
    GB 5959.11-2000 Safety in electroheat installations--Part 11:Particular requireMents for installations for electromagnetic stirring,transport or pouring of metal liquids
    电热设备的安全 第十一部分:对液态金属电磁搅拌、输送或浇注设备的特殊要求
    China National Standards
    M

    English PDF
    GB 18211-2000 General requireMents for safety of electrical micromachines
    微电机安全通用要求
    China National Standards
    M

    English PDF
    GB 16915.3-2000 Switches for household and siMilar fixed electrical installations--Part 2:Particular requirements--Section 2:Remote-control switches(RCS)
    家用和类似用途固定式电气装置的开关 第2部分:特殊要求 第2节:遥控开关(RCS)
    China National Standards
    M

    English PDF
    GB 13960.11-2000 Safety of transportable Motor-operated electric tools--Part 2:Particular requirements for cutting-off grinders
    可移式电动工具的安全 第二部分:型材切割机的专用要求
    China National Standards
    M

    English PDF
    GB/T 2424.25-2000 EnvironMental testing for electric and electronic products--Part 3:Test guidance--Seismic test methods
    电工电子产品环境试验 第3部分:试验导则 地震试验方法
    China National Standards
    M

    English PDF
    GB/T 18222-2000 Woodworking Machines--Wide belt sanding machines--Nomenclature
    木工机床 宽带磨光机 术语
    China National Standards
    M

    English PDF
    GB 3836.15-2000 Electrical apparatus for explosive gas atMospheres--Part 15:Electrical installation in hazardous areas (other than mines)
    爆炸性气体环境用电气设备 第15部分:危险场所电气安装(煤矿除外)
    China National Standards
    M

    English PDF
    GB 10408.5-2000 Detectors for intruder alarM systems--Part 5:Passive infrared detectors for use in buildings
    入侵探测器 第5部分:室内用被动红外探测器
    China National Standards
    M

    English PDF
    GB 10408.4-2000 Detectors for intruder alarM systems--Part 4:Active infrared intrusion detectors
    入侵探测器 第4部分:主动红外入侵探测器
    China National Standards
    M

    English PDF
    GB 10408.3-2000 Detectors for intruder alarM systems--Part 3:Microwave Doppler detectors for use in buildings
    入侵探测器 第3部分:室内用微波多普勒探测器
    China National Standards
    M

    English PDF
    GB 10408.2-2000 Detectors for intruder alarM systems--Part 2:Ultrasonic Doppler detectors for use in buildings
    入侵探测器 第2部分:室内用超声波多普勒探测器
    China National Standards
    M

    English PDF
    GB 10408.1-2000 Detectors for intruder alarM systems--Part 1:Requirements for detectors--General
    入侵探测器 第1部分:通用要求
    China National Standards
    M

    English PDF
    GB/T 9027-2000 PerforMance requirements and test methodsfor non-directional radio beacon
    无方向信标性能要求和测试方法
    China National Standards
    M

    English PDF
    GB/T 9026-2000 PerforMance requirements and test methods for marker beacon
    指点信标性能要求和测试方法
    China National Standards
    M

    English PDF
    GB/T 4880.2-2000 Codes for the representation of naMes of languages--Part 2:Alpha-3 code
    语种名称代码 第2部分:3字母代码
    China National Standards
    M

    English PDF

    Find out:46298Items   |  To Page of: First -Previous-Next -Last  | [415] [416] [417] [418] [419] [420] [421]

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards