China M GB Standards English PDF List

GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.

China "M" GB Standards English PDF List:

Standard Code	Standard Title	Standard Class	Order
GB/T 274-2000	Rolling bearings--ChaMfer dimension--Maximumvalues 滚动轴承倒角尺寸最大值	China National Standards M	English PDF
GB/T 18230.5-2000	Plain washers for high-strength structural bolting hardened and teMpered 栓接结构用平垫圈淬火并回火	China National Standards M	English PDF
GB/T 18214.1-2000	Global navigation satellite systeMs(GNSS)--Part 1:Global positioning system(GPS)--Receiver equipment--Performance standards，methods of testing and required test results 全球导航卫星系统(GNSS) 第1部分:全球定位系统(GPS) 接收设备性能标准、测试方法和要求的测试结果	China National Standards M	English PDF
GB/T 18210-2000	Crystalline silicon photovoltaic(PV) array--On-site Measurement of I-V characteristics 晶体硅光伏(PV)方阵 I-V特性的现场测量	China National Standards M	English PDF
GB/T 12841-2000	Generic specification for the transportMechanism of cassette tape recorders 盒式磁带录音机运带机构通用规范	China National Standards M	English PDF
GB/T 1242-2000	DiMensions for panel mounted indicating and recording electrical measuring instruments 安装式指示和记录电测量仪表的尺寸	China National Standards M	English PDF
GB/T 12199-2000	EnvironMental testing requirements and methods for non-broadcast video tape recorders 非广播盒式磁带录像机环境要求和试验方法	China National Standards M	English PDF
GB/T 11617-2000	Lexicographical syMbols 辞书编纂符号	China National Standards M	English PDF
GB/T 4641-2000	CaMera usage of 16mm motion-picture film 16mm电影胶片在摄影机上的用法	China National Standards M	English PDF
GB/T 4640-2000	CaMera usage of 35mm motion-picture film 35mm电影胶片在摄影机上的用法	China National Standards M	English PDF
GB/T 4639-2000	CineMatography--Monophonic 35mm negative photographic sound record on 35 mm motion-picture film--Position and maximum width dimensions 35mm单声道电影光学声底片上声迹的位置和最大宽度尺寸	China National Standards M	English PDF
GB/T 4636-2000	Maximum projectable image area on35mm motion-picture film--Position and dimensions 35mm影片上最大可放映画面的位置和尺寸	China National Standards M	English PDF
GB/T 4635-2000	IMage area produced by camera aperture on 35mm motion-picture film--Position and dimensions 35mm电影摄影机片窗在胶片上形成的画面的位置和尺寸	China National Standards M	English PDF
GB/T 2926-2000	Leaders and run-out trailers for 35Mm and 16mm release prints--Specification 35mm和16mm电影发行拷贝片头和片尾的技术规格	China National Standards M	English PDF
GB/T 18212-2000	Calculation of Maximum external diameter of cables for indoor installations 户内装置用电缆最大外径的计算	China National Standards M	English PDF
GB/T 18200-2000	Report forM and contents for radiation induced occupational diseases 职业性放射性疾病报告格式与内容	China National Standards M	English PDF
GB/T 18199-2000	Medical management and treatment programme for personnel exposed to accidental external irradiation 外照射事故受照人员的医学处理和治疗方案	China National Standards M	English PDF
GB/T 18198-2000	EstiMation standards of personal cumulative exposure to radon decay products for miners 矿工氡子体个人累积暴露量估算规范	China National Standards M	English PDF
GB/T 18197-2000	Medical management standard for internal contamination of radionuclides 放射性核素内污染人员医学处理规范	China National Standards M	English PDF
GB 8282-2000	Diagnostic criteria and principles ofManagement for radiation skin diseases 放射性皮肤疾病诊断标准及处理原则	China National Standards M	English PDF
GB 8281-2000	Diagnostic criteria and principles of Management for chronic radiation sickness from external exposure 外照射慢性放射病诊断标准及处理原则	China National Standards M	English PDF
GB 8280-2000	Diagnostic criteria and principles of Management for acute radiation sickness from external exposure 外照射急性放射病诊断标准及处理原则	China National Standards M	English PDF
GB 18196-2000	Specifications of the Medical examinations for the overexposed individuals 过量受照人员的医学检查规范	China National Standards M	English PDF
GB 16852.6-2000	Diagnosis of occupational acute cheMicals poisoning--Part 6:Diagnostic criteria of occupational acute toxic pulmonopathy 职业性急性化学物中毒的诊断第6部分:职业性急性化学物中毒性呼吸系统疾病的诊断	China National Standards M	English PDF
GB/T 18204.9-2000	Methods of microbiological examination for water in swimming pool--Determination of aerobic bacterial count 游泳池水微生物检验方法细菌总数测定	China National Standards M	English PDF
GB/T 18204.10-2000	Methods of microbiological examination for water in swimming pool--Determination of Coliform bacteria 游泳池水微生物检验方法大肠菌群测定	China National Standards M	English PDF
GB/T 18203-2000	Hygienic standard for Streptococcus heMolyticus in indoor air 室内空气中溶血性链球菌卫生标准	China National Standards M	English PDF
GB/T 18190-2000	Oceanological terMinology--Marine geology 海洋学术语海洋地质学	China National Standards M	English PDF
GB/T 12783-2000	Editorial noMinating method for the modeldesignation of rubber and plastics machinery 橡胶塑料机械产品型号编制方法	China National Standards M	English PDF
GB/T 889.2-2000	Prevailing torque type hexagon nuts(with non-Metallic insert)，style 1，with fine pitch thread 1型非金属嵌件六角锁紧螺母细牙	China National Standards M	English PDF
GB/T 819.1-2000	Countersunk flat head screws(coMmon head style)with cross recess--Part 1:Steel of property class 4.8 十字槽沉头螺钉第1部分:钢4.8级	China National Standards M	English PDF
GB/T 69-2000	Countersunk slotted raised head screws(coMmon head style) 开槽半沉头螺钉	China National Standards M	English PDF
GB/T 6187.2-2000	Prevailing torque type all-Metal hexagon nuts with flange with fine pitch thread 全金属六角法兰面锁紧螺母细牙	China National Standards M	English PDF
GB/T 6187.1-2000	Prevailing torque type all-Metal hexagon nuts with flange 全金属六角法兰面锁紧螺母	China National Standards M	English PDF
GB/T 6186-2000	Prevailing torque type all-Metal hexagon nuts，style 2--Property class 9 2型全金属六角锁紧螺母 9级	China National Standards M	English PDF
GB/T 6185.2-2000	Prevailing torque type all-Metal hexagon nuts，style 2，with fine pitch thread 2型全金属六角锁紧螺母细牙	China National Standards M	English PDF
GB/T 6185.1-2000	Prevailing torque type all-Metal hexagon nuts，style 2 2型全金属六角锁紧螺母	China National Standards M	English PDF
GB/T 6184-2000	Prevailing torque type all-Metal hexagon nuts，style 1 1型全金属六角锁紧螺母	China National Standards M	English PDF
GB/T 6183.2-2000	Prevailing torque type hexagon nutswith flange(with non-Metallic insert) with fine pitch thread 非金属嵌件六角法兰面锁紧螺母细牙	China National Standards M	English PDF
GB/T 6183.1-2000	Prevailing torque type hexagon nuts with flange(with non-Metallic insert) 非金属嵌件六角法兰面锁紧螺母	China National Standards M	English PDF
GB/T 6174-2000	Hexagon thin nuts(unchaMfered) 六角薄螺母无倒角	China National Standards M	English PDF
GB/T 6172.2-2000	Prevailing torque type hexagon thin nuts(withnon-Metallic insert) 非金属嵌件六角锁紧薄螺母	China National Standards M	English PDF
GB/T 6172.1-2000	Hexagon thin nuts(chaMfered) 六角薄螺母	China National Standards M	English PDF
GB/T 5779.3-2000	Fasteners--Surface discontinuities--Bolts，screws and studs for special requireMents 紧固件表面缺陷螺栓、螺钉和螺柱特殊要求	China National Standards M	English PDF
GB/T 5779.1-2000	Fasteners--Surface discontinuities--Bolts，screws and studs for general requireMents 紧固件表面缺陷螺栓、螺钉和螺柱一般要求	China National Standards M	English PDF
GB/T 68-2000	Slotted countersunk flat head screws(coMmon head style) 开槽沉头螺钉	China National Standards M	English PDF
GB/T 3098.7-2000	Mechanical properties of fasteners--Thread rolling screws 紧固件机械性能自挤螺钉	China National Standards M	English PDF
GB/T 3098.5-2000	Mechanical properties of fasteners--Tapping screws 紧固件机械性能自攻螺钉	China National Standards M	English PDF
GB/T 3098.4-2000	Mechanical properties of fasteners--Nuts--Fine pitch thread 紧固件机械性能螺母细牙螺纹	China National Standards M	English PDF
GB/T 3098.3-2000	Mechanical properties of fasteners--Set screws 紧固件机械性能紧定螺钉	China National Standards M	English PDF
GB/T 3098.2-2000	Mechanical properties of fasteners--Nuts--Coarse thread 紧固件机械性能螺母粗牙螺纹	China National Standards M	English PDF
GB/T 3098.17-2000	Mechanical properties of fasteners--Preloading test for the detection of hydrogen embrittlement--Parallel bearing surface method 紧固件机械性能检查氢脆用预载荷试验平行支承面法	China National Standards M	English PDF
GB/T 3098.14-2000	Mechanical properties of fasteners--Widening test on nuts 紧固件机械性能螺母扩孔试验	China National Standards M	English PDF
GB/T 18195-2000	Hexagon nuts for fine Mechanics 精密机械用六角螺母	China National Standards M	English PDF
GB/T 18194-2000	Rivet shank diaMeters 铆钉杆径	China National Standards M	English PDF
GB/T 18193-2000	VacuuM technology--Mass-spectrometer-type leak detector calibration 真空技术质谱检漏仪校准	China National Standards M	English PDF
GB/T 1237-2000	Designation systeM for fasteners 紧固件标记方法	China National Standards M	English PDF
GB/T 1236-2000	Industrial fans--PerforMance testing using standardized airways 工业通风机用标准化风道进行性能试验	China National Standards M	English PDF
GB/T 120.2-2000	Parallel pins with internal thread，of hardened steel and Martensitic stainless steel 内螺纹圆柱销淬硬钢和马氏体不锈钢	China National Standards M	English PDF
GB/T 119.2-2000	Parallel pins，of hardened steel and Martensitic stainless steel(Dowel pins) 圆柱销淬硬钢和马氏体不锈钢	China National Standards M	English PDF
GB 50316-2000	Design code for industrial Metallic piping 工业金属管道设计规范（2008年版）	China National Standards M	English PDF
GB 18187-2000	FerMented vinegar 酿造食醋	China National Standards M	English PDF
GB 18186-2000	FerMented soy sauce 酿造酱油	China National Standards M	English PDF
GB/T 4595-2000	Measurement of noise on board vessels 船上噪声测量	China National Standards M	English PDF
GB/T 4273-2000	TerMinololgy of integrated barge 分节驳术语	China National Standards M	English PDF
GB/T 18183-2000	AutoMotive synchronous belt industry--Fatigue test 汽车同步带疲劳试验方法	China National Standards M	English PDF
GB/T 10708.3-2000	Reciprocating rubber seals--Types，diMensions and tolerances--Part 3:Rubber dust seals 往复运动橡胶密封圈结构尺寸系列第3部分:橡胶防尘密封圈	China National Standards M	English PDF
GB/T 10708.2-2000	Reciprocating rubber seals--Types，diMensions and tolerances--Part 2:Rubber seals on two-way 往复运动橡胶密封圈结构尺寸系列第2部分:双向密封橡胶密封圈	China National Standards M	English PDF
GB/T 10708.1-2000	Reciprocating rubber seals--Types，diMensions and tolerances--Part 1:Rubber seals on one-way 往复运动橡胶密封圈结构尺寸系列第1部分:单向密封橡胶密封圈	China National Standards M	English PDF
GB/T 18179-2000	Metallic coatings--Porosity tests--Humid sulfur(flowers of sulfur) test 金属覆盖层孔隙率试验潮湿硫(硫华)试验	China National Standards M	English PDF
GB/T 18178-2000	General rules of the selection for painting systeM of water paint 水性涂料涂装体系选择通则	China National Standards M	English PDF
GB/T 7127.2-2000	Brake hose asseMblies for hydraulic braking systems of road vehicles used with petroleum-base brake fluid 使用石油基制动液的道路车辆液压制动系统用制动软管组合件	China National Standards M	English PDF
GB/T 7127.1-2000	Brake hose asseMblies for hydraulic braking systems of road vehicles used with non-petroleum-base brake fluid 使用非石油基制动液的道路车辆液压制动系统用制动软管组合件	China National Standards M	English PDF
GB/T 3600-2000	Fertilizers--DeterMination of ammoniacal nitrogen content--Formaldehyde method 肥料中氨态氮含量的测定甲醛法	China National Standards M	English PDF
GB/T 3595-2000	Fertilizers--DeterMination of ammoniacal nitrogen content--Titrimetric method after distillation 肥料中氨态氮含量的测定蒸馏后滴定法	China National Standards M	English PDF
GB/T 3051-2000	Inorganic cheMical products for industrial use--General method for determination of chloride content--Mercurimetric method 无机化工产品中氯化物含量测定的通用方法汞量法	China National Standards M	English PDF
GB/T 3050-2000	Inorganic cheMical products for industrial use--General method for determination of chloride content--Potentiometric method 无机化工产品中氯化物含量测定的通用方法电位滴定法	China National Standards M	English PDF
GB/T 2659-2000	Codes for the representation of naMes of countries and regions 世界各国和地区名称代码	China National Standards M	English PDF
GB/T 2305-2000	CheMical reagent--Phosphorus(V) oxide 化学试剂五氧化二磷	China National Standards M	English PDF
GB/T 1633-2000	Plastics--TherMoplastic materials--Determination of Vicat softening temperature(VST) 热塑性塑料维卡软化温度(VST)的测定	China National Standards M	English PDF
GB/T 1587-2000	PotassiuM carbonate for industrial use 工业碳酸钾	China National Standards M	English PDF
GB/T 1232.1-2000	Rubber，unvulcanized--DeterMinations using a shearing-disc viscometer--Part 1:Determination of Mooney viscosity 未硫化橡胶用圆盘剪切粘度计进行测定第1部分:门尼粘度的测定	China National Standards M	English PDF
GB 4838-2000	Packaging for eMulsifiable concentrates of pesticides 农药乳油包装	China National Standards M	English PDF
GB 18172.2-2000	10% Chlorothalonil sMoke tablets 10%百菌清烟片剂	China National Standards M	English PDF
GB 18172.1-2000	Chlorothalonil sMoke powder--Granualars 百菌清烟粉粒剂	China National Standards M	English PDF
GB/T 18142-2000	InforMation technology--Notation of format for data element values 信息技术数据元素值格式记法	China National Standards M	English PDF
GB/T 7306.2-2000	Pipe threads with 55 degree thread angle where pressure-tight joints are Made on the threads--Part 2:Taper internal and external threads 55°密封管螺纹第2部分:圆锥内螺纹与圆锥外螺纹	China National Standards M	English PDF
GB/T 7306.1-2000	Pipe threads with 55 degree thread angle where pressure-tight joints are Made on the threads--Part 1:Parallel internal and taper external threads 55°密封管螺纹第1部分:圆柱内螺纹与圆锥外螺纹	China National Standards M	English PDF
GB/T 4459.3-2000	Mechanical drawings--Representation of splines 机械制图花键表示法	China National Standards M	English PDF
GB/T 18149-2000	Centrifugal，Mixed flow and axial pumps--Code for hydraulic performance tests--Precision class 离心泵、混流泵和轴流泵水力性能试验规范精密级	China National Standards M	English PDF
GB/T 18148-2000	Testing Method of the compaction performance of rollers and compactors 压实机械压实性能试验方法	China National Standards M	English PDF
GB/T 18146.1-2000	HeMp fibre--Part 1:Raw white degummed hemp 大麻纤维第1部分:大麻精麻	China National Standards M	English PDF
GB/T 1804-2000	General tolerances--Tolerances for linear and angular diMensions without individual tolerance indications 一般公差未注公差的线性和角度尺寸的公差	China National Standards M	English PDF
GB/T 18154-2000	Technical specification of autoMatic dust explosion suppression devices 监控式抑爆装置技术要求	China National Standards M	English PDF
GB/T 18153-2000	Safety of Machinery--Temperatures of touchable surfaces--Ergonomics data to establish temperature limit values for hot surfaces 机械安全可接触表面温度确定热表面温度限值的工效学数据	China National Standards M	English PDF
GB/T 15970.7-2000	Corrosion of Metals and alloys--Stress corrosion testing--Part 7:Slow strain rate testing 金属和合金的腐蚀应力腐蚀试验第7部分:慢应变速率试验	China National Standards M	English PDF
GB/T 17006.5-2000	Evaluation and routine testing in Medical imaging departments--Part 2-5:Constancytests--Image display devices 医用成像部门的评价及例行试验第2-5部分:图像显示装置稳定性试验	China National Standards M	English PDF
GB/T 17006.4-2000	Evaluation and routine testing in Medical imaging departments--Part 2-3:Constancy tests--Darkroom safelight conditions 医用成像部门的评价及例行试验第2-3部分:暗室安全照明状态稳定性试验	China National Standards M	English PDF
GB/T 17006.3-2000	Evaluation and routine testing in Medical imaging departments--Part 2-2:Constancy tests--Radio-graphic cassettes and film changers--Film-screen contact and relative sensitivity of the screen-cassette assembly 医用成像部门的评价及例行试验第2-2部分:X射线摄影暗匣和换片器屏-片接触和屏-匣组件相对灵敏度稳定性试验	China National Standards M	English PDF
GB/T 17006.2-2000	Evaluation and routine testing in Medical imaging departments--Part 2-1:Constancy tests--Film processors 医用成像部门的评价及例行试验第2-1部分:洗片机稳定性试验	China National Standards M	English PDF

Find out:46298Items | To Page of: First -Previous-Next -Last | [416] [417] [418] [419] [420] [421] [422]

- Since 2001 -
Focus on China Standards & Compliance Services

www.rjs.cn
China Licenses

www.transcustoms.com
China HS code & Tariff

www.gbstandards.org
China National Standards