Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 29042-2012 |
Thresholds of rolling resistance for Motor vehicle tyres 汽车轮胎滚动阻力限值 |
China National Standards Motor |
 English PDF |
| GB/T 7936-2012 |
Hydraulic fluid power-positive displacement pumps and Motors - Determination of derived capacity 液压泵和马达 空载排量测定方法 |
China National Standards Motor |
English PDF |
| GB/T 16666-2012 |
Monitoring and testing for energy saving of Motor-pump liquid transport system 泵类液体输送系统节能监测 |
China National Standards Motor |
English PDF |
| GB/T 29041-2012 |
Road wear testing methods for Motor vehicle tyres 汽车轮胎道路磨耗试验方法 |
China National Standards Motor |
English PDF |
| GB/T 29040-2012 |
Test methods of rolling resistance for Motor vehicle tyres - Single point test and correlation of measurement results 汽车轮胎滚动阻力试验方法 单点试验和测量结果的相关性 |
China National Standards Motor |
English PDF |
| GB/T 18861-2012 |
Test methods of rolling resistance for Motor vehicle tyres and motorcycle tyres - Multi-point test 汽车轮胎和摩托车轮胎滚动阻力试验方法 多点试验 |
China National Standards Motor |
English PDF |
| GB/T 29122-2012 |
Anti-tampering measures for Motorcycles and mopeds 摩托车和轻便摩托车防篡改 |
China National Standards Motor |
English PDF |
| GB/T 12544-2012 |
Measurement of maximum speed of Motor vehicles 汽车最高车速试验方法 |
China National Standards Motor |
English PDF |
| GB/T 29326-2012 |
Selection of energy-efficient Motors including variable speed applications - Application guide 包括变速应用的能效电动机选择和应用导则 |
China National Standards Motor |
English PDF |
| GB/T 29314-2012 |
Specification for the reconstruction of Motor system for energy-saving 电动机系统节能改造规范 |
China National Standards Motor |
English PDF |
| GB/T 29307-2012 |
The reliability test methods of drive Motor system for electric vehicles 电动汽车用驱动电机系统可靠性试验方法 |
China National Standards Motor |
English PDF |
| GB/T 28946-2012 |
Mobile Motorcycle safety technology inspection lane 移动式摩托车安全技术检测线 |
China National Standards Motor |
English PDF |
| GB/T 21972.2-2012 |
Specification for variable-frequency adjustable-speed three-phase induction Motors for crane and metallurgical applications - Part 2: YZP series variable-frequency adjustable-speed three-phase induction motors for crane and metallurgical applications(cool 起重及冶金用变频调速三相异步电动机技术条件 第2部分：YZP系列起重及冶金用变频调速三相异步电动机（轴流风机冷却） |
China National Standards Motor |
English PDF |
| GB/T 12974-2012 |
General specification for a.c. lift Motor 交流电梯电动机通用技术条件 |
China National Standards Motor |
English PDF |
| GB/T 12796.2-2012 |
Permanent ferrite magnets - Part 2: Sectional specification for permanent ferrite magnets for use in microMotors 永磁铁氧体磁体 第2部分：微电机用永磁铁氧体磁体分规范 |
China National Standards Motor |
English PDF |
| GB 3883.9-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for tappers 手持式电动工具的安全 第2部分：攻丝机的专用要求 |
China National Standards Motor |
English PDF |
| GB 3883.8-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for sheet metal shears and nibblers 手持式电动工具的安全 第2部分：电剪刀和电冲剪的专用要求 |
China National Standards Motor |
English PDF |
| GB 3883.7-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for hammers 手持式电动工具的安全 第2部分：锤类工具的专用要求 |
China National Standards Motor |
English PDF |
| GB 3883.6-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for drills and impact drills 手持式电动工具的安全 第2部分：电钻和冲击电钻的专用要求 |
China National Standards Motor |
English PDF |
| GB 3883.4-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for sanders and polishers other than disk type 手持式电动工具的安全 第2部分：非盘式砂光机和抛光机的专用要求 |
China National Standards Motor |
English PDF |
| GB 3883.2-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for screwdrivers and impact wrenches 手持式电动工具的安全 第2部分：螺丝刀和冲击扳手的专用要求 |
China National Standards Motor |
English PDF |
| GB 3883.21-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for band saws 手持式电动工具的安全 第2部分：带锯的专用要求 |
China National Standards Motor |
English PDF |
| GB 3883.20-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for strapping tools 手持式电动工具的安全 第2部分：捆扎机的专用要求 |
China National Standards Motor |
English PDF |
| GB 3883.19-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for drain cleaners 手持式电动工具的安全 第2部分：管道疏通机的专用要求 |
China National Standards Motor |
English PDF |
| GB 3883.12-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for concrete vibrators 手持式电动工具的安全 第2部分：混凝土振动器的专用要求 |
China National Standards Motor |
English PDF |
| GB 3883.11-2012 |
Safety of hand-held Motor-operated electric tools - Part 2: Particular requirements for reciprocating saws(jig and sabre saws) 手持式电动工具的安全 第2部分：往复锯(曲线锯、刀锯)的专用要求 |
China National Standards Motor |
English PDF |
| GB/T 28768-2012 |
Determination of hydrocarbon types and oxygenates in automotive-Motor gasoline by multidimensional gas chromatography method 车用汽油烃类组成和含氧化合物的测定 多维气相色谱法 |
China National Standards Motor |
English PDF |
| GB/T 28698-2012 |
Rolling bearings - Deep groove ball bearings for electric Motors - Specifications 滚动轴承 电机用深沟球轴承 技术条件 |
China National Standards Motor |
English PDF |
| GB/T 28575-2012 |
Specification for YE3 Series（IP55）super-high efficiency three-phase induction Motor（Frame size 80～355） YE3系列（IP55）超高效率三相异步电动机技术条件（机座号80～355） |
China National Standards Motor |
English PDF |
| GB/T 28562-2012 |
Specification for YVF series variable frequency high voltage three-phase induction Motors (Frame size 355-630) YVF系列变频调速高压三相异步电动机技术条件（机座号355～630） |
China National Standards Motor |
English PDF |
| GB/T 12667-2012 |
General specification for excitation assembly with semiconductors for synchronous Motors 同步电动机半导体励磁装置总技术条件 |
China National Standards Motor |
English PDF |
| GB/T 1032-2012 |
Test procedures for three-phase induction Motors 三相异步电动机试验方法 |
China National Standards Motor |
English PDF |
| GB 12981-2012 |
Motor vehicle brake fluids 机动车辆制动液 |
China National Standards Motor |
English PDF |
| GB 18613-2012 |
Minimum allowable values of energy efficiency and energy efficiency grades for small and medium three-phase asynchronous Motors 中小型三相异步电动机能效限定值及能效等级 |
China National Standards Motor |
English PDF |
| GB/T 27905.5-2011 |
Inspection methods for trace and physical evidences from fire scene- Part 5:Small power induction Motor 火灾物证痕迹检查方法 第5部分:小功率异步电动机 |
China National Standards Motor |
English PDF |
| GB/T 25123.3-2011 |
Electric traciton - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of convertor-fed alternating current Motors by summation of the component losses 电力牵引 轨道机车车辆和公路车辆用旋转电机 第3部分：用损耗总和法确定变流器供电的交流电动机的总损耗 |
China National Standards Motor |
English PDF |
| GB/T 14598.303-2011 |
General specification for digital Motor combined protection equipment 数字式电动机综合保护装置通用技术条件 |
China National Standards Motor |
English PDF |
| GB/T 27744-2011 |
Specification for premium efficiency three-phase permanent magnet synchronous Motor（frame size 132~280） 超高效三相永磁同步电动机技术条件(机座号132-280) |
China National Standards Motor |
English PDF |
| GB/T 26921-2011 |
The guide of design optimization for Motor systems（fans,pumps,air compressors） 电机系统（风机、泵、空气压缩机）优化设计指南 |
China National Standards Motor |
English PDF |
| GB/T 26846-2011 |
Lead-out wire and connector of Motor and controller used for electric bicycles 电动自行车用电机和控制器的引出线及接插件 |
China National Standards Motor |
English PDF |
| GB/T 26741-2011 |
Brake linings for Motor tricycle 机动三轮车用制动器衬片 |
China National Standards Motor |
English PDF |
| GB/T 26650-2011 |
Magnesium alloy castings for electric bicycle and Motorcycle wheels 摩托车和电动自行车用镁合金车轮铸件 |
China National Standards Motor |
English PDF |
| GB/T 17491-2011 |
Hydraulic fluid power - Positive-displacement pumps,Motor and integral transmissions - Methods of testing and presenting basic steady state performance 液压泵、马达和整体传动装置 稳态性能的试验及表达方法 |
China National Standards Motor |
English PDF |
| GB/T 26674-2011 |
Road vehicle - Electrical performance of starter Motors - Test methods 道路车辆 起动机电气特性试验方法 |
China National Standards Motor |
English PDF |
| GB/T 26670-2011 |
Guide of eco-design for medium and small size electric Motors 中小型电机环境意识设计导则 |
China National Standards Motor |
English PDF |
| GB/T 26605-2011 |
Dimethyl ether for Motor vehicle fuel 车用燃料用二甲醚 |
China National Standards Motor |
English PDF |
| GB 7063-2011 |
The wheel guards of Motor vehicles 汽车护轮板 |
China National Standards Motor |
English PDF |
| GB 11568-2011 |
Motor vehicles-Hood latch system 汽车罩（盖）锁系统 |
China National Standards Motor |
English PDF |
| GB 11557-2011 |
The stipulation protecting drivers from being injured by Motor vehicle steering mechanism 防止汽车转向机构对驾驶员伤害的规定 |
China National Standards Motor |
English PDF |
| GB 14621-2011 |
Limits and measurement methods for exhaust pollutants from Motorcycles and mopeds under two-speed idle conditions 摩托车和轻便摩托车排气污染物排放限值及测量方法（双怠速法） |
China National Standards Motor |
English PDF |
| GB 4706.17-2010 |
Household and similar electrical appliances - Safety - Particular requirements for Motor-compressors 家用和类似用途电器的安全 电动机-压缩机的特殊要求 |
China National Standards Motor |
English PDF |
| GB/T 26149-2010 |
TPM Sensor Module based tire pressure monitoring systems for Motor vehicles 基于胎压监测模块的汽车轮胎气压监测系统 |
China National Standards Motor |
English PDF |
| GB/T 26181-2010 |
Hermetic Motor-compressors for household and similar heat pump water heater using CO2 refrigerant 家用和类似用途CO2制冷剂热泵热水器用全封闭型电动机-压缩机 |
China National Standards Motor |
English PDF |
| GB 18100.3-2010 |
Provisions for installation of lighting and light-signalling devices for Motorcycles - Part 3: Three-wheeled motorcycles 摩托车照明和光信号装置的安装规定 第3部分：三轮摩托车 |
China National Standards Motor |
English PDF |
| GB 18100.2-2010 |
Provisions for installation of lighting and light-signalling devices for Motorcycles - Part 2: Two-wheels moped 摩托车照明和光信号装置的安装规定 第2部分：两轮轻便摩托车 |
China National Standards Motor |
English PDF |
| GB 18100.1-2010 |
Provisions for installation of lighting and light-signalling device for Motorcycles - Part 1: Two-wheels motorcycle 摩托车照明和光信号装置的安装规定 第1部分：两轮摩托车 |
China National Standards Motor |
English PDF |
| GB 17352-2010 |
Performance and installation requirements of rear views mirrors for Motorcycles and mopeds 摩托车和轻便摩托车后视镜的性能和安装要求 |
China National Standards Motor |
English PDF |
| GB/T 26036-2010 |
Aluminium alloys die forgings for Motor-wheel 汽车轮毂用铝合金模锻件 |
China National Standards Motor |
English PDF |
| GB/T 14212-2010 |
Motorcycle chains - Characteristics and test methods 摩托车链条 技术条件和试验方法 |
China National Standards Motor |
English PDF |
| GB 25958-2010 |
Minimum allowable values of energy efficiency and values of efficiency grade for small-power Motors 小功率电动机能效限定值及能效等级 |
China National Standards Motor |
English PDF |
| GB/T 25985-2010 |
Protective of devices against unauthorized use of Motor vehicles 汽车防盗装置的保护 |
China National Standards Motor |
English PDF |
| GB/T 25762-2010 |
Rolling bearings - Needle roller and cage assemblies for Motorcycle connecting rod 滚动轴承 摩托车连杆支承用滚针和保持架组件 |
China National Standards Motor |
English PDF |
| GB/T 25738-2010 |
Technical guideline of Motor commissioning for nuclear power plant 核电厂电动机调试技术导则 |
China National Standards Motor |
English PDF |
| GB 14048.4-2010 |
Low-voltage switchgear and controlgear - Part 4-1: Contactors and Motor-starters - Electromechanical contactors and motor-starters (Including motor protector) 低压开关设备和控制设备 第4-1部分：接触器和电动机起动器 机电式接触器和电动机起动器（含电动机保护器） |
China National Standards Motor |
English PDF |
| GB/T 25441-2010 |
The Motors for vacuum cleaners 吸尘器电机 |
China National Standards Motor |
English PDF |
| GB/T 25319-2010 |
Fuel cell power system used for Motor vehicles - Technical specification 汽车用燃料电池发电系统 技术条件 |
China National Standards Motor |
English PDF |
| GB/T 25303-2010 |
Specification for high efficiency permanent magnet synchronous Motor for textile purpose（Frame size 90～225） 纺织专用高效率永磁同步电动机技术条件 (机座号 90～225) |
China National Standards Motor |
English PDF |
| GB/T 25302-2010 |
Specification for high efficiency three-phase induction Motor for textile purpose (Frame size 90～225) 纺织专用高效率三相异步电动机技术条件 (机座号90～225） |
China National Standards Motor |
English PDF |
| GB/T 25291-2010 |
Specification for three-phase constant torque asynchronous Motor for cargo winches in ships 船用起货机用恒力矩三相异步电动机技术条件 |
China National Standards Motor |
English PDF |
| GB/T 25290-2010 |
Specification for Y3 series（IP55）three-phase induction Motor （Frame size 63～355） Y3系列（IP55）三相异步电动机技术条件（机座号63～355） |
China National Standards Motor |
English PDF |
| GB 811-2010 |
Helmets for Motorcyclists 摩托车乘员头盔 |
China National Standards Motor |
English PDF |
| GB/T 25409-2010 |
Small-size submersible Motor-pumps 小型潜水电泵 |
China National Standards Motor |
English PDF |
| GB/T 25331-2010 |
Radiator for converter of electric locomotive and electric Motor units 电力机车、电力动车组主变流器用水散热器 |
China National Standards Motor |
English PDF |
| GB/T 25123.2-2010 |
Electric tracion - Rotating electrical machines for rail and road vehicles - Part 2: Electronic convertor-fed alternating current Motors 电力牵引 轨道机车车辆和公路车辆用旋转电机 第2部分：电子变流器供电的交流电动机 |
China National Standards Motor |
English PDF |
| GB/T 25123.1-2010 |
Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current Motors 电力牵引 轨道机车车辆和公路车辆用旋转电机 第1部分：除电子变流器供电的交流电动机之外的电机 |
China National Standards Motor |
English PDF |
| GB/T 25117.3-2010 |
Railway applications - Rolling stock - Combined testing - Part 3: Combined testing of alternating current Motors,fed by an indirect converter,and their control system 轨道交通 机车车辆 组合试验 第3部分：间接变流器供电的交流电动机及其控制系统的组合试验 |
China National Standards Motor |
English PDF |
| GB/T 25117.2-2010 |
Railway applications - Rolling stock - Combined testing - Part 2: Combined testing of chopper-fed direct current traction Motors and their control system 轨道交通 机车车辆 组合试验 第2部分：斩波器供电的直流牵引电动机及其控制系统的组合试验 |
China National Standards Motor |
English PDF |
| GB/T 25117.1-2010 |
Railway applications - Rolling stock - Combined testing - Part 1: Combined testing of inverter-fed alternating current Motors and their control system 轨道交通 机车车辆 组合试验 第1部分：逆变器供电的交流电动机及其控制系统的组合试验 |
China National Standards Motor |
English PDF |
| GB/T 25090-2010 |
Step-down power saving device for asynchronous Motor at light load 电动机轻载调压节电装置 |
China National Standards Motor |
English PDF |
| GB/T 10082-2010 |
Technical requirements of heavy duty railway Motor trolley 重型轨道车技术条件 |
China National Standards Motor |
English PDF |
| GB 7036.1-2009 |
Inner tube of pneumatic tyres - Part 1: Inner tube of Motor vehicle tures 充气轮胎内胎 第1部分：汽车轮胎内胎 |
China National Standards Motor |
English PDF |
| GB/T 24674-2009 |
Waste submersible Motor-pumps 污水污物潜水电泵 |
China National Standards Motor |
English PDF |
| GB/T 24625-2009 |
Cuide for the design and application of synchronous Motors for converter supply 变频器供电同步电动机设计与应用指南 |
China National Standards Motor |
English PDF |
| GB/T 24553-2009 |
Motorcycles and mopeds-limitative device to steering and maximum wheel steer angle-requirements and measurement methods 摩托车和轻便摩托车转向轮限位装置及最大转向角的技术要求和测定方法 |
China National Standards Motor |
English PDF |
| GB/T 24551-2009 |
Safety belt reminder for Motor vehicles 汽车安全带提醒装置 |
China National Standards Motor |
English PDF |
| GB/T 24550-2009 |
The protection of Motor vehicle for pedestrians in the event of a collision 汽车对行人的碰撞保护 |
China National Standards Motor |
English PDF |
| GB/T 24546-2009 |
Motorcycles - Measurement method for location of centre of gravity 摩托车重心位置的测量方法 |
China National Standards Motor |
English PDF |
| GB/T 24545-2009 |
Requirement of speed limitation system for Motor vehicles 车辆车速限制系统技术要求 |
China National Standards Motor |
English PDF |
| GB 11555-2009 |
Motor vehicles-windshield demisting and defrosting systems - Performance requirements and test methods 汽车风窗玻璃除霜和除雾系统的性能和试验方法 |
China National Standards Motor |
English PDF |
| GB 12350-2009 |
Safety requirements of small-power Motors 小功率电动机的安全要求 |
China National Standards Motor |
English PDF |
| GB/T 16961-2009 |
General specification for Motors asynchronous miniature electronic regulator 电子调速微型异步电动机通用技术条件 |
China National Standards Motor |
English PDF |
| GB/T 13537-2009 |
General specification for miniature Motors electronic household appliances 电子类家用电器用电动机通用技术条件 |
China National Standards Motor |
English PDF |
| GB/T 24158-2009 |
Electric Motorcycles and electric mopeds - General specifications 电动摩托车和电动轻便摩托车通用技术条件 |
China National Standards Motor |
English PDF |
| GB/T 24157-2009 |
Electric Motorcycles and electric mopeds - Energy consumption and range - Test procedures 电动摩托车和电动轻便摩托车能量消耗率和续驶里程试验方法 |
China National Standards Motor |
English PDF |
| GB/T 24156-2009 |
Electric Motorcycles and electric mopeds - Power performance - Test methods 电动摩托车和电动轻便摩托车 动力性能 试验方法 |
China National Standards Motor |
English PDF |
| GB 24155-2009 |
Electric Motorcycles and electric mopeds - Safety specifications 电动摩托车和电动轻便摩托车安全要求 |
China National Standards Motor |
English PDF |
| GB/T 24278-2009 |
Protective clothing for professional Motorcycle riders 摩托车手防护服装 |
China National Standards Motor |
English PDF |
| GB/T 23799-2009 |
Methanol gasoline (M85) for Motor vehicles 车用甲醇汽油(M85) |
China National Standards Motor |
English PDF |
| GB/T 23662-2009 |
Rubber seals for use between concrete Motorway paving sections 混凝土道路伸缩缝用橡胶密封件 |
China National Standards Motor |
English PDF |
| GB/T 23592-2009 |
Catalyst for Motorcycle exhaust purification 摩托车排气净化催化剂 |
China National Standards Motor |
English PDF |
| Find out:602Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 |
+86-755-25831330
