China National Standards

China NC GB Standards Search System


GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards;  We provide Chinese GB standards and English version GB standards  Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.
  •  China "NC" GB Standards List:
  • Standard  Code GB Standard Title Standard Class Order
  • GB/T 33577-2017
  • Intelligent transportation systems―Forward vehicle collision warning systems―PerformaNCe requirements and test procedures NC
    China National Standards
  • GB/T 24218.17-2017
  • Textiles—Test methods for nonwovens—Part 17: Determination of resistaNCe to penetration by water (spray impact) NC
    China National Standards
  • GB/T 33740-2017
  • Mobile payment—Test methods of contactless radio frequeNCy interface based on 2.45GHz range controlled communication technology NC
    China National Standards
  • GB/T 33736-2017
  • Mobile payment—Technical requirements for contactless radio frequeNCy interface based on 2.45GHz range controlled communication technology NC
    China National Standards
  • GB/T 17454.1-2017
  • Safety of machinery—Pressure-sensitive protective devices—Part 1: General priNCiples for design and testing of pressure-sensitive mats and pressure-sensitive floors NC
    China National Standards
  • GB/T 34560.4-2017
  • Structural steels—Part 4:Technical delivery conditions for high yield strength queNChed and tempered structural steel plates NC
    China National Standards
  • GB/T 17215.324-2017
  • Electricity metering equipment (a.c.)—Particular requirements—Part 24: Static meters for reactive energy at fundamental frequeNCy (classes 0.5S,1S and 1) NC
    China National Standards
  • GB/T 17454.3-2017
  • Safety of machinery—Pressure-sensitive protective devices—Part 3: General priNCiples for design and testing of pressure-sensitive bumpers, plates, wires and similar devices NC
    China National Standards
  • GB/T 17454.2-2017
  • Safety of machinery—Pressure-sensitive protective devices—Part 2: General priNCiples for design and testing of pressure-sensitive edges pressure-sensitive bars NC
    China National Standards
  • GB 12021.6-2017
  • Minimum allowable values of energy efficieNCy and energy efficiency grades for electric rice cookers NC
    China National Standards
  • GB/T 33749-2017
  • Guidelines for water efficieNCy benchmarking of industry enterprises NC
    China National Standards
  • GB/T 33716.1-2017
  • Electronic archiving—Part 1:Specification coNCerning the design and the operation of an information system for electronic information preservation NC
    China National Standards
  • GB/T 33679-2017
  • Technical safety requirements of rocket production for rainfall enhaNCement and hail suppression NC
    China National Standards
  • GB/T 33639-2017
  • CNC hydraulic punching and drilling composite machine for plates NC
    China National Standards
  • GB/T 33641.2-2017
  • Tractors and machinery for agriculture and forestry—Seat belts—Part 2:ANChorage strength requirements NC
    China National Standards
  • GB/T 33584.2-2017
  • Seawater quality requirements and analysis methods for seawater cooling system—Part 2: Determination of ziNC NC
    China National Standards
  • GB/T 24218.16-2017
  • Textiles—Test methods for nonwovens—Part 16: Determination of resistaNCe to penetration by water(hydrostatic pressure) NC
    China National Standards
  • GB/T 13931-2017
  • Electrostatic precipitator—Methods of performaNCe tests NC
    China National Standards
  • GB/T 33739-2017
  • Test methods for radio frequeNCy interface of contactless reader based on 13.56MHz and 2.45GHz dual-frequency technology NC
    China National Standards
  • GB/T 33495-2017
  • Regulations of household electronic and electrical appliaNCes maintenance service for rural areas NC
    China National Standards
  • SB/T 11197-2017
  • (Code for AcceptaNCe of Electronic Commerce Commodities) NC
    China Commerce Standards
  • GB/T 33496-2017
  • Regulations of electronic and electrical appliaNCe service for government procurement NC
    China National Standards
  • GB/T 33641.1-2017
  • Tractors and machinery for agriculture and forestry—Seat belts—Part 1: ANChorage location requirement NC
    China National Standards
  • GB/T 33744-2017
  • EmergeNCy shelter for earthquake disasters—Guidelines on the operation and management NC
    China National Standards
  • GB/T 25724-2017
  • Technical specifications for surveillaNCe video and audio coding for public security NC
    China National Standards
  • GB 26149-2017
  • PerformaNCe requirements and test methods of tire pressure monitoring system for passenger cars NC
    China National Standards
  • GB/T 33732-2017
  • Textiles—Determination of resistaNCe to water penetration—Impact penetration test NC
    China National Standards
  • GB/T 33627-2017
  • General requirement of aero-derivative gas turbine assembly eNClosure NC
    China National Standards
  • GB/T 33742-2017
  • Technical requirements for radio frequeNCy interface of contactless reader based on 13.56MHz and 2.45GHz dual-frequency technology NC
    China National Standards
  • GB/T 18183-2017
  • Fatigue test method for automotive syNChronous belt NC
    China National Standards
  • GB/T 33642-2017
  • Tractor tires for agriculture and forestry—Test procedures of quick abrasion resistaNCe NC
    China National Standards
  • GB/T 31052.4-2017
  • Lifting appliaNCes—Code of inspection and maintenance—Part 4: Jib cranes NC
    China National Standards
  • GB/T 33633-2017
  • Vacuum technology—Positive-displacement vacuum pump—Measurement of water vapour toleraNCe NC
    China National Standards
  • GB/T 33487-2017
  • Ships and marine technology—Ship lauNChing air bags NC
    China National Standards
  • GB/T 33709-2017
  • Mobile laboratory—GuidaNCe on dissemination and traceability of the value of equipment NC
    China National Standards
  • QB/T 5070-2017
  • (Artificial leather - Synthetic leather - Test method - Determination of resistaNCe to contamination) NC
    China Light Industry Standards
  • GB/T 5223.3-2017
  • Steel bars for the prestressing of coNCrete NC
    China National Standards
  • GB/T 33725-2017
  • Watch cases and accessories—Tests of the resistaNCe to wear, scratching and impacts NC
    China National Standards
  • GB/T 1859.4-2017
  • Reciprocating internal combustion engines—Measurement of sound power levels using sound pressure—Part 4:Survey method using a refereNCe sound source NC
    China National Standards
  • GB/T 18721.2-2017
  • Graphic technology-Prepress digital data exchange-Part 2:XYZ/sRGB eNCoded standard colour image data (XYZ/SCID) NC
    China National Standards
  • GB/T 6934-2017
  • Methods of measurement of electrical performaNCe for short wave single-sideband receivers NC
    China National Standards
  • GB 50446-2017
  • Code for construction and acceptaNCe of shield tunnelling method NC
    China National GB Standards
  • QC/T 1066-2017
  • (PerformaNCe requirements and bench test method for cable assembly for car parking brake) NC
    China Automobile & Vehicle industry Standards
  • QB/T 2386-2017
  • (Paper and cardboard short distaNCe compression tester) NC
    China Light Industry Standards
  • GB/T 33748-2017
  • Agricultural service—Supplying specification of agricultural scieNCe and technology information service NC
    China National Standards
  • GB/T 34590.9-2017
  • Road vehicles—FuNCtional safety—Part 9: Automotive Safety Integrity Level (ASIL)-oriented safety-oriented and analyses NC
    China National Standards
  • QB/T 1671-2017
  • (Paper and board - Physical properties test - Special technical conditions for puNChing and cutting equipment) NC
    China Light Industry Standards
  • GB/T 20501.3-2017
  • Public information guidaNCe systems—Design principles and requirements for guidance elements—Part 3: Location plans NC
    China National Standards
  • GB/T 31052.12-2017
  • Lifting appliaNCes—Code of inspection and maintenance—Part 12: Floating cranes NC
    China National Standards
  • GB/T 19443-2017
  • Insulators for overhead lines with a nominal voltage above 1500V—Ceramic or glass insulator units for d.c. systems—Definitions,test methods and acceptaNCe criteria NC
    China National Standards
  • GB/T 19685-2017
  • Prestressed coNCrete cylinder pipe NC
    China National Standards
  • GB/T 33688-2017
  • Evaluation method for performaNCe of coal preparation magnetic separator NC
    China National Standards
  • GB/T 34668-2017
  • Safety requirements and test methods for electrical self-balaNCing vehicles NC
    China National Standards
  • GB/T 33591-2017
  • Technical specification of time syNChronism system and equipment in smart substation NC
    China National Standards
  • GB 25502-2017
  • Minimum allowable values of water efficieNCy and water efficiency grades for water closets NC
    China National Standards
  • GB/T 31983.31-2017
  • Narrow band power line communication over low-voltage mains—Part 31:Narrow band orthogonal frequeNCy division multiplexing power line—Communication physical layer specification NC
    China National Standards
  • GB/T 14541-2017
  • Guide for maintenaNCe and supervision of in-service mineral turbine oil used for power plants NC
    China National Standards
  • GB/T 10414-2017
  • SyNChronous belt drives—Automotive synchronous pulleys NC
    China National Standards
  • GB/T 17993-2017
  • General requirements for the competeNCe of automotive multiple-function inspection agency NC
    China National Standards
  • GB 50334-2017
  • Code for quality acceptaNCe of municipal wastewater treatment plant engineering NC
    China National GB Standards
  • GB/T 33549-2017
  • Small-size light piping water irrigation machines—Specification for performaNCe evaluation NC
    China National Standards
  • GB/T 12734-2017
  • SyNChronous belt drives—Automotive synchronous belts NC
    China National Standards
  • HJ 853-2017
  • (Discharge permit application and issuaNCe technical specification petrochemical industry) NC
    China Environmental Protection Industry Standards
  • GB/T 33626.2-2017
  • Pneumatic lutricators—Part 2:Test methods to determine the main characteristics to be iNCluded in supplier's literature NC
    China National Standards
  • GB/T 33705-2017
  • Soil moisture observation—FrequeNCy domain reflection method NC
    China National Standards
  • GB/T 33521.1-2017
  • Mechannical vibration—Ground-borne noise and vibration arising from rail systems—Part1:General guidaNCe NC
    China National Standards
  • QC/T 1067.1-2017
  • (Connectors for automotive wiring harnesses and electrical equipment - Part 1: Definitions, test methods and general performaNCe requirements) NC
    China Automobile & Vehicle industry Standards
  • GB/T 9239.32-2017
  • Mechanical vibration—Rotor balaNCing—Part32:Shaft and fitment key convention NC
    China National Standards
  • GB/T 3857-2017
  • Test method for chemical resistaNCe of glass fiber reinforced thermosetting plastics NC
    China National Standards
  • GB/T 14542-2017
  • Guide for maintenaNCe and supervision of transformer oil NC
    China National Standards
  • GB/T 33747-2017
  • Agricultural service—Quality requirement for agricultural scieNCe and technology information service NC
    China National Standards
  • GB/T 34248-2017
  • PerformaNCe test method of three-way catalyst NC
    China National Standards
  • GB/T 33510-2017
  • Conveyor belts with heat-resistant rubber covers—Heat resistaNCe of covers—Requirements and test methods NC
    China National Standards
  • QB/T 5039-2017
  • (LED lamp performaNCe test method) NC
    China Light Industry Standards
  • GB/T 33552-2017
  • Small-size gasoline engine direct-link high speed centrifugal pumps—Specification for performaNCe evaluation NC
    China National Standards
  • GB/T 33551-2017
  • Portable small-type diesel engine-pumps direct-linking unit—Specification for performaNCe evaluation NC
    China National Standards
  • GB/T 34252-2017
  • Test method for crazing resistaNCe of domestic ceramic wares NC
    China National Standards
  • GB/T 33547-2017
  • Circulating canned motor-pumps—Specification for performaNCe evaluation NC
    China National Standards
  • GB/T 13487-2017
  • SyNChronous belts for general drive NC
    China National Standards
  • GB/T 34940.3-2017
  • Static transfer systems(STS)—Part 3: Method for specifying performaNCe and test requirements NC
    China National Standards
  • GB/T 33626.1-2017
  • Pneumatic lubricators—Part 1:Main characteristics to be iNCluded in supplier's literature and product-marking requirements NC
    China National Standards
  • GB/T 34253-2017
  • Test method for resistaNCe to freezer to microwave/oven usage on domestic ceramic wares NC
    China National Standards
  • GB/T 549-2017
  • Electro-welded aNChor chains NC
    China National Standards
  • GB/T 17638-2017
  • Geosynthetics—Synthetic staple fibers needlepuNChed nonwoven geotextiles NC
    China National Standards
  • GB/T 33539-2017
  • Specification for operation of experieNCe diving in ocean NC
    China National Standards
  • GB/T 34378-2017
  • Dynamic balaNCe test method for motorcycle tyres NC
    China National Standards
  • GB/T 702-2017
  • Hot-rolled steel bars—Dimensions,shape,weight and toleraNCes NC
    China National Standards
  • HJ 854-2017
  • (Sewage permit application and issuaNCe technical specification - Coking chemical industry) NC
    China Environmental Protection Industry Standards
  • GB/T 34582-2017
  • Single cell and stack performaNCe test methods for solid oxide fuel cells (SOFC) NC
    China National Standards
  • GB/T 33761-2017
  • General priNCiples for green product assessment NC
    China National Standards
  • GB/T 34614-2017
  • Photovoltaic(PV)glass—Test method and performaNCe evaluation of exposure to urban environment in temperate climate NC
    China National Standards
  • GB/T 35102-2017
  • Information technology—Radio frequeNCy identification—Conformance test methods for air interface at 800/900MHz NC
    China National Standards
  • GB/T 33644-2017
  • NC press brake—Testing of the accuracy NC
    China National Standards
  • GB/T 33582-2017
  • General priNCiples of structural finite element analysis for mechanical products NC
    China National Standards
  • GB/T 34725-2017
  • Standard test method for performaNCe of structural wood-based panel under concentrated static and impact loads NC
    China National Standards
  • SY/T 7318.3-2017
  • (Test methods for special performaNCe of oil and gas pipelines - Part 3: Full - scale bending test) NC
    China Oil & Gas Industry Standards
  • GB/T 3533.1-2017
  • Standardization benefit evaluation—Part 1: General priNCiples of economic benefit evaluation NC
    China National Standards
  • GB/Z 26958.30-2017
  • Geometrical product specifications (GPS)—Filtration—Part 30: Robust profile filters—Basic coNCept NC
    China National Standards
  • GB/T 33527-2017
  • Public employment service—General priNCiples NC
    China National Standards
  • GB/Z 17625.14-2017
  • Electromagnetic compatibility—Limits—Assessment of emission limits for harmonics, interharmonics,voltage fluctuations and unbalaNCe for the connection of disturbing installations to LV power systems NC
    China National Standards

    Find out:15195Items   |  To Page of: First -Previous-Next -Last  | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152

     

    +86-400-6578191        info@transcustoms.com 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2017 All Rights Reserved


    www.GBstandards.org