Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 4960.7-2010 |
Glossary of terms for nuclear science aNd technology Part 7: Nuclear materials control and safeguards 核科学技术术语 第7部分：核材料管制与核保障 |
China National Standards Nd |
 English PDF |
| GB/T 4960.3-2010 |
Glossary of terms - nuclear science aNd technology - Part 3: Nuclear fuel and nuclear fuel cycle 核科学技术术语 第3部分：核燃料与核燃料循环 |
China National Standards Nd |
English PDF |
| GB/T 4960.1-2010 |
Glossary of terms - nuclear science aNd technology - part 1: Nuclear physics and nuclear chemistry 核科学技术术语 第1部分：核物理与核化学 |
China National Standards Nd |
English PDF |
| GB/T 311.4-2010 |
Insulation co-ordination - Part 4: Computational guide to insulation Co-ordination aNd modeling of electrical networks 绝缘配合 第4部分：电网绝缘配合及其模拟的计算导则 |
China National Standards Nd |
English PDF |
| GB/T 27320-2010 |
Food defense plan aNd guidelines for its application - Food processing establishments 食品防护计划及其应用指南 食品生产企业 |
China National Standards Nd |
English PDF |
| GB/T 25450-2010 |
Eddy current testing of fuel element eNd cap weld for PHWR 重水堆核电厂燃料元件端塞焊缝涡流检测 |
China National Standards Nd |
English PDF |
| GB/T 25449-2010 |
Specification for fuel buNdles of PHWR plant 重水堆核电厂燃料棒束技术条件 |
China National Standards Nd |
English PDF |
| GB/T 25448-2010 |
Helium leak testing of PHWR nuclear fuel buNdles 重水堆核电厂燃料棒束氦质谱泄漏检测 |
China National Standards Nd |
English PDF |
| GB/T 25447-2010 |
Proton exchange membrane fuel cell test system aNd activation system 质子交换膜燃料电池测试台及活化台 |
China National Standards Nd |
English PDF |
| GB/T 25446-2010 |
Specification aNd technical requirements for oil-immersed amorphous alloy core distribution transformers 油浸式非晶合金铁心配电变压器技术参数和要求 |
China National Standards Nd |
English PDF |
| GB/T 25444.7-2010 |
Mobile aNd fixed offshore units - Electrical installations - Part 7: Hazardous areas 移动式和固定式近海设施 电气装置 第7部分：危险区域 |
China National Standards Nd |
English PDF |
| GB/T 25444.6-2010 |
Mobile aNd fixed offshore units - Electrical installations - Part 6: Installation 移动式和固定式近海设施 电气装置 第6部分：安装 |
China National Standards Nd |
English PDF |
| GB/T 25444.5-2010 |
Mobile aNd fixed offshore units - Electrical installations - Part 5: Mobile units 移动式和固定式近海设施 电气装置 第5部分：移动设施 |
China National Standards Nd |
English PDF |
| GB/T 25444.3-2010 |
Mobile aNd fixed offshore units - Electrical installations - Part 3: Equipment 移动式和固定式近海设施 电气装置 第3部分：设备 |
China National Standards Nd |
English PDF |
| GB/T 25444.2-2010 |
Mobile aNd fixed offshore units - Electrical installations - Part 2: System design 移动式和固定式近海设施 电气装置 第2部分：系统设计 |
China National Standards Nd |
English PDF |
| GB/T 25442-2010 |
StaNdard methods for determining losses and efficiency of rotating electrical machines from tests(excluding machines for traction vehicles) 旋转电机（牵引电机除外）确定损耗和效率的试验方法 |
China National Standards Nd |
English PDF |
| GB/T 25440.4-2010 |
Retrieval aNd analysis of surgical implants - Part 4: Analysis of retrieved ceramic surgical implants 外科植入物的取出与分析 第4部分：取出陶瓷外科植入物的分析 |
China National Standards Nd |
English PDF |
| GB/T 25440.3-2010 |
Retrieval aNd analysis of surgical implants - Part 3: Analysis of retrieved polymeric surgical implants 外科植入物的取出与分析 第3部分：取出聚合物外科植入物的分析 |
China National Standards Nd |
English PDF |
| GB/T 25440.2-2010 |
Retrieval aNd analysis of surgical implants - Part 2: Analysis of retrieved metallic surgical implants 外科植入物的取出与分析 第2部分：取出金属外科植入物的分析 |
China National Standards Nd |
English PDF |
| GB/T 25440.1-2010 |
Retrieval aNd analysis of surgical implants - Part 1: Retrieval and handling 外科植入物的取出与分析 第1部分：取出与处理 |
China National Standards Nd |
English PDF |
| GB/T 25439-2010 |
StaNdard method for using cellulose triacetate dosimetry system to measure absorbed dose 使用三醋酸纤维素剂量测量系统测量吸收剂量的标准方法 |
China National Standards Nd |
English PDF |
| GB/T 25438-2010 |
Specification aNd technical requirements for three-phase oil-immersed tridimensional toroidal-core distribution transformers 三相油浸式立体卷铁心配电变压器技术参数和要求 |
China National Standards Nd |
English PDF |
| GB/T 25318-2010 |
Locking devices for ball aNd socket couplings of string insulator units：Dimensions and tests. 绝缘子串元件球窝联接用锁紧销：尺寸和试验 |
China National Standards Nd |
English PDF |
| GB/T 25317-2010 |
Dimensions of clevis aNd tongue couplings of string insulator units 绝缘子串元件的槽型连接尺寸 |
China National Standards Nd |
English PDF |
| GB/T 25313-2010 |
The staNdardization for the evaluation of electromagnetic field distribution of welding equipment 焊接设备电磁场检测与评估准则 |
China National Standards Nd |
English PDF |
| GB/T 25312-2010 |
The staNdardization for the evaluation of welder exposure to electromagnetic field of welding equipment 焊接设备电磁场对操作人员影响程度的评价准则 |
China National Standards Nd |
English PDF |
| GB/T 25310-2010 |
Stationary spot welding machines aNd projection welding machines 固定式点、凸焊机 |
China National Standards Nd |
English PDF |
| GB/T 25306-2010 |
StaNdard of electron accelerator facility engineering for radiation processing 辐射加工用电子加速器工程通用规范 |
China National Standards Nd |
English PDF |
| GB/T 25304-2010 |
Specific requirements for non-vascular self-expaNding metallic stents 非血管自扩张金属支架专用要求 |
China National Standards Nd |
English PDF |
| GB/T 25302-2010 |
Specification for high efficiency three-phase iNduction motor for textile purpose (Frame size 90～225) 纺织专用高效率三相异步电动机技术条件 (机座号90～225） |
China National Standards Nd |
English PDF |
| GB/T 25300-2010 |
Resistance welding equipment - Particular specfications applicable to transformers with one secoNdary winding for multi-spot welding, as used in the automobile industry 电阻焊设备 汽车工业中使用的具有一个次级线圈的多点焊变压器特殊技术条件 |
China National Standards Nd |
English PDF |
| GB/T 25299-2010 |
Resistance welding equipment - Particular specfications applicable to transformers with two separate secoNdary windings for multi-spot welding, as used in the automobile industry 电阻焊设备 汽车工业中使用的具有两个独立次级线圈的多点焊变压器特殊技术条件 |
China National Standards Nd |
English PDF |
| GB/T 25297.2-2010 |
Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for eNd-thrust electrodes 电阻点焊 电极接头，外锥度1:10 第2部分：末端插入式圆柱柄配合 |
China National Standards Nd |
English PDF |
| GB/T 25293-2010 |
Mechanical door lock for cabinets of electrotechnical aNd electronic equipment 电工电子设备机柜 机械门锁 |
China National Standards Nd |
English PDF |
| GB/T 25290-2010 |
Specification for Y3 series（IP55）three-phase iNduction motor （Frame size 63～355） Y3系列（IP55）三相异步电动机技术条件（机座号63～355） |
China National Standards Nd |
English PDF |
| GB/T 25289-2010 |
Specification aNd technical requirements for 20kV oil-immersed distribution transformers 20kV油浸式配电变压器技术参数和要求 |
China National Standards Nd |
English PDF |
| GB/T 19520.17-2010 |
Mechanical structures for electronic equipment - Dimension of mechanical structures of the 482.6 mm（19 in）series - Part 3-105: Dimensions aNd design aspects for 1U high chassis 电子设备机械结构 482.6mm“（19in）系列机械结构尺寸 第3-105部分：1U高度机箱的尺寸和设计要求 |
China National Standards Nd |
English PDF |
| GB/T 16927.3-2010 |
High-voltage test techniques - Part3: Definitions aNd requirements for on-site testing 高电压试验技术 第3部分: 现场试验的定义及要求 |
China National Standards Nd |
English PDF |
| GB/T 16676-2010 |
Specification of alarm aNd monitoring network system for bank security and protection 银行安全防范报警监控联网系统技术要求 |
China National Standards Nd |
English PDF |
| GB/T 15474-2010 |
Classification on instrumentation aNd control function of instrumentation and control systems important to safety for nuclear power plants 核电厂安全重要仪表和控制功能分类 |
China National Standards Nd |
English PDF |
| GB/T 14598.9-2010 |
Measuring relays aNd protection equipment - Part 22-3：Electrical disturbance tests - Radiated electromagnetic field immunity 量度继电器和保护装置 第22-3部分：电气骚扰试验 辐射电磁场抗扰度 |
China National Standards Nd |
English PDF |
| GB/T 14598.14-2010 |
Measuring relays aNd protection equipment - Part 22-2: Electrical disturbance tests - Electrostatic discharge tests 量度继电器和保护装置 第22-2部分：电气骚扰试验--静电放电试验 |
China National Standards Nd |
English PDF |
| GB/T 14597-2010 |
Environmental climatic coNditions appearing in different altitudes for electrical products 电工产品不同海拔的气候环境条件 |
China National Standards Nd |
English PDF |
| GB/T 12162.4-2010 |
X aNd gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields 用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 第4部分：低能X射线参考辐射场中场所和个人剂量仪的校准 |
China National Standards Nd |
English PDF |
| GB/T 8190.9-2010 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles aNd test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第9部分：压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程 |
China National Standards Nd |
English PDF |
| GB/T 8190.1-2010 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous aNd particulate exhaust emissions 往复式内燃机 排放测量 第1部分：气体和颗粒排放物的试验台测量 |
China National Standards Nd |
English PDF |
| GB/T 8190.10-2010 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles aNd test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第10部分：压燃式发动机瞬态工况排气烟度的现场测量用试验循环和测试规程 |
China National Standards Nd |
English PDF |
| GB/T 6809.8-2010 |
Reciprocating internal combustion engines - Vocabulary of components aNd systems - Part 8: Starting systems 往复式内燃机 零部件和系统术语 第8部分：起动系统 |
China National Standards Nd |
English PDF |
| GB/T 6809.5-2010 |
Reciprocating internal combustion engines - Vocabulary of components aNd systems - Part 5: Cooling systems 往复式内燃机 零部件和系统术语 第5部分：冷却系统 |
China National Standards Nd |
English PDF |
| GB/T 6118-2010 |
ENd mills - Technical specifications 立铣刀技术条件 |
China National Standards Nd |
English PDF |
| GB/T 6117.3-2010 |
ENd mills - Part 3: Milling cutters with 7：24 taper shanks 立铣刀 第3部分：7:24锥柄立铣刀 |
China National Standards Nd |
English PDF |
| GB/T 6117.2-2010 |
ENd mills - Part 2: Milling cutters with morse taper shanks 立铣刀 第2部分：莫氏锥柄立铣刀 |
China National Standards Nd |
English PDF |
| GB/T 6117.1-2010 |
ENd mills - Part 1: Milling cutters with parallel shanks 立铣刀 第1部分：直柄立铣刀 |
China National Standards Nd |
English PDF |
| GB/T 25424-2010 |
Tractors aNd machinery for agricultural and forestry - Windowscreen wiper 农林拖拉机和机械 风挡玻璃雨刷器 |
China National Standards Nd |
English PDF |
| GB/T 25422-2010 |
Subsoiling plow for grasslaNd 草地潜松犁 |
China National Standards Nd |
English PDF |
| GB/T 25414-2010 |
Thickness limit aNd test method of mulch film for cotton planting 棉花种植用地膜厚度限值及测定 |
China National Standards Nd |
English PDF |
| GB/T 25413-2010 |
Limit aNd test method for residual quantity of agricultural mulch film 农田地膜残留量限值及测定 |
China National Standards Nd |
English PDF |
| GB/T 25401-2010 |
Agricultural machinery - Manure spreaders - Environmental protection - Requirements aNd test methods 农业机械 厩肥撒施机 环保要求和试验方法 |
China National Standards Nd |
English PDF |
| GB/T 25400-2010 |
Trailed agricuitural vehicles - Brakes aNd braking devices - Laboratory test method 牵引式农用车辆 制动器和制动装置 实验室试验方法 |
China National Standards Nd |
English PDF |
| GB/T 25399-2010 |
Tractors aNd machinery for agriculture and forestry - Hydraulic coupling - Braking circuit 农林拖拉机和机械 液压接头 制动回路 |
China National Standards Nd |
English PDF |
| GB/T 25398-2010 |
Agricultural trailers aNd trailed equipment - Braking cylinders - Specifications 农用挂车和牵引式机具 制动用液压缸 技术要求 |
China National Standards Nd |
English PDF |
| GB/T 25397-2010 |
Agricultural machinery - Rotary aNd flail mower - Test methods and acceptance criteria for protective skirts 农业机械 旋转式和甩刀式割草机 防护罩（裙）试验方法和验收规范 |
China National Standards Nd |
English PDF |
| GB/T 25396-2010 |
Agricultural machinery - Rotary aNd flail mower - Thrown-object test and acceptance criteria 农业机械 旋转式和甩刀式割草机 抛掷物试验和验收规范 |
China National Standards Nd |
English PDF |
| GB/T 25395-2010 |
Equipment for vine cultivation aNd wine making - Grape presses - Methods of test 葡萄栽培和葡萄酒酿制设备 葡萄压榨机 试验方法 |
China National Standards Nd |
English PDF |
| GB/T 25394-2010 |
Equipment for vine cultivation aNd wine making - Mash pumps - Methods of test 葡萄栽培和葡萄酒酿制设备 果浆泵 试验方法 |
China National Standards Nd |
English PDF |
| GB/T 25393-2010 |
Equipment for vine cultivation aNd wine making - Grape-harvesting machinery - Test methods 葡萄栽培和葡萄酒酿制设备 葡萄收获机 试验方法 |
China National Standards Nd |
English PDF |
| GB/T 25392-2010 |
Agricultural engineering - Electrical aNd electronic equipment - Testing resistance to environmental conditions 农业工程 电气和电子设备 对环境条件的耐久试验 |
China National Standards Nd |
English PDF |
| GB/T 25391-2010 |
Technical specification of water-pumping wiNd-mill 风力提水机组技术规范 |
China National Standards Nd |
English PDF |
| GB/T 25390-2010 |
Spheroidal graphite cast iron for wiNd turbine 风力发电机组 球墨铸铁件 |
China National Standards Nd |
English PDF |
| GB/T 25389.2-2010 |
WiNd turbine low-speed permanent magnet synchronous generator - Part 2: Testing methods 风力发电机组 低速永磁同步发电机 第2部分：试验方法 |
China National Standards Nd |
English PDF |
| GB/T 25389.1-2010 |
WiNd turbine low-speed permanent magnet synchronous generator - Part 1: Technical conditions 风力发电机组 低速永磁同步发电机 第1部分：技术条件 |
China National Standards Nd |
English PDF |
| GB/T 25388.2-2010 |
Double-fed converter of wiNd turbine generator system - Part 2: Test method 风力发电机组 双馈式变流器 第2部分：试验方法 |
China National Standards Nd |
English PDF |
| GB/T 25388.1-2010 |
Double-fed converter of wiNd turbine generator system - Part 1: Technical condition 风力发电机组 双馈式变流器 第1部分：技术条件 |
China National Standards Nd |
English PDF |
| GB/T 25387.2-2010 |
Full-power converter of wiNd turbine generator systems - Part 2: Test method 风力发电机组 全功率变流器 第2部分：试验方法 |
China National Standards Nd |
English PDF |
| GB/T 25387.1-2010 |
Full-power converter of wiNd turbine generator systems - Part 1: Technical condition 风力发电机组 全功率变流器 第1部分：技术条件 |
China National Standards Nd |
English PDF |
| GB/T 25386.2-2010 |
WiNd turbine generator system - Variable speed constant frequency control system - Part 2: Test method 风力发电机组 变速恒频控制系统 第2部分：试验方法 |
China National Standards Nd |
English PDF |
| GB/T 25386.1-2010 |
WiNd turbine generator system variable speed constant frequency control system - Part 1: Technical condition 风力发电机组 变速恒频控制系统 第1部分：技术条件 |
China National Standards Nd |
English PDF |
| GB/T 25385-2010 |
Operation aNd maintenance requirement for wind turbines 风力发电机组 运行及维护要求 |
China National Standards Nd |
English PDF |
| GB/T 25384-2010 |
Turbine blade of wiNd turbine generator systems - Full-scale structural testing of rotor blades 风力发电机组 风轮叶片全尺寸结构试验 |
China National Standards Nd |
English PDF |
| GB/T 25383-2010 |
WiNd turbine generator system - Rotor blades 风力发电机组 风轮叶片 |
China National Standards Nd |
English PDF |
| GB/T 25382-2010 |
Regulations for operational acceptance test of off-grid wiNd/solar hybrid generator system 离网型风光互补发电系统 运行验收规范 |
China National Standards Nd |
English PDF |
| GB/T 25381-2010 |
Genealogy of wiNd turbine generator system 风力发电机组 系列型谱 |
China National Standards Nd |
English PDF |
| GB/T 25378-2010 |
Collets with 8°setting angle for tool shanks - Collets，nuts aNd fitting dimensions 工具柄用8°安装锥的弹簧夹头 弹簧夹头、螺母和配合尺寸 |
China National Standards Nd |
English PDF |
| GB/T 25375-2010 |
Metal-cutting machine tools - Check aNd evaluation for combine surface by miniating 金属切削机床 结合面涂色法检验及评定 |
China National Standards Nd |
English PDF |
| GB/T 25371-2010 |
FouNdry machinery - Measurement method of sound pressure level 铸造机械 噪声声压级测量方法 |
China National Standards Nd |
English PDF |
| GB/T 25370-2010 |
FouNdry machinery - Terminology 铸造机械 术语 |
China National Standards Nd |
English PDF |
| GB/T 25369-2010 |
Metal cutting-bimetal baNd saw blades - Technical specifications 金属切割双金属带锯条 技术条件 |
China National Standards Nd |
English PDF |
| GB/T 25359-2010 |
Petroleum aNd natural gas industries - Packaged reciprocating gas compressors 石油及天然气工业用集成撬装往复压缩机 |
China National Standards Nd |
English PDF |
| GB/T 25358-2010 |
Packaged rotary oil-free air compressors for petroleum aNd natural gas industries 石油及天然气工业用集装型回转无油空气压缩机 |
China National Standards Nd |
English PDF |
| GB/T 25357-2010 |
Petroleum, petrochemical aNd natural gas industries - Process positive-displacement rotary-type compressors 石油、石化及天然气工业流程用容积式回转压缩机 |
China National Standards Nd |
English PDF |
| GB/T 25355-2010 |
Aircraft - GrouNd-based de-icing/anti-icing methods with fluids 航空器 地面除冰防冰液体法 |
China National Standards Nd |
English PDF |
| GB/T 25353-2010 |
Test method to determine the flammability aNd flame propagation characteristics of thermal/acoustic insulation materials 隔热隔音材料燃烧及火焰蔓延特性试验方法 |
China National Standards Nd |
English PDF |
| GB/T 25349-2010 |
Technical specification for inspection aNd maintenance of vehicle using ethanol gasoline 使用乙醇汽油车辆检查、维护技术规范 |
China National Standards Nd |
English PDF |
| GB/T 25346-2010 |
Procedures aNd measuring methods for the transfer of bunker fuels to ships 船舶供受燃油程序及检测方法 |
China National Standards Nd |
English PDF |
| GB/T 25343.5-2010 |
Railway applications - Welding of railway vehicles aNd components - Part 5: Inspection,testing and documentation 铁路应用 轨道车辆及其零部件的焊接 第5部分：检验、试验及文件 |
China National Standards Nd |
English PDF |
| GB/T 25343.4-2010 |
Railway applications - Welding of railway vehicles aNd components - Part 4: Production requirements 铁路应用 轨道车辆及其零部件的焊接 第4部分：生产要求 |
China National Standards Nd |
English PDF |
| GB/T 25343.3-2010 |
Railway applications - Welding of railway vehicles aNd components - Part 3: Design requirements 铁路应用 轨道车辆及其零部件的焊接 第3部分：设计要求 |
China National Standards Nd |
English PDF |
| GB/T 25343.2-2010 |
Railway applications - Welding of railway vehicles aNd components - Part 2: Quality requirements and certification of welding manufacturer 铁路应用 轨道车辆及其零部件的焊接 第2部分：焊接制造商的质量要求及认证 |
China National Standards Nd |
English PDF |
| GB/T 25343.1-2010 |
Railway applications - Welding of railway vehicles aNd components - Part 1: General 铁路应用 轨道车辆及其零部件的焊接 第1部分：总则 |
China National Standards Nd |
English PDF |
| GB/T 25342-2010 |
Vocabulary for railway track-laying machine aNd girder-erecting machine 铁路铺轨机、架桥机词汇 |
China National Standards Nd |
English PDF |
| Find out:27370Items | To Page of: First -Previous-Next -Last | [161] [162] [163] [164] [165] [166] [167] |
+86-755-25831330
