China National Standards

China Nd GB Standards English PDF List


GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards;  We provide Chinese GB standards and English version GB standards  Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.
  •  China "Nd" GB Standards English PDF List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 3475-2008 Requirement aNd test method for speed governing system of marine diesel engine
    船用柴油机调速系统技术要求和试验方法
    China National Standards
    Nd

    English PDF
    GB/T 21485-2008 Ships aNd marine technology - Shipboard plans for fire protection,life-saving appliances and means of escape
    船舶和海上技术 船上消防、救生设备及逃生路线布置图
    China National Standards
    Nd

    English PDF
    GB/T 11699-2008 Small craft with inboard engine - Propeller shaft eNds and bosses
    舷内机小艇 螺旋桨轴端和桨毂
    China National Standards
    Nd

    English PDF
    GB/T 21487.1-2008 Rotating shaft vibration measuring systems - Part 1: Relative aNd absolute sensing of radial vibration
    转轴振动测量系统 第1部分:径向振动的相对和绝对检测
    China National Standards
    Nd

    English PDF
    GB/T 1182-2008 Geometrical Product Specifications(GPS) - Geometrical tolerancing - Tolerances of form,orientation,location aNd run-out
    产品几何技术规范(GPS)几何公差 形状、方向、位置和跳动公差标注
    China National Standards
    Nd

    English PDF
    GB/T 4447-2008 Sea-going vessels-WiNdlasses and anchor capstans
    海船用起锚机和起锚绞盘
    China National Standards
    Nd

    English PDF
    GB/T 3893-2008 Shipbuilding aNd marine structures - Deck machinery - Vocabulary and symbols
    造船及海上结构物 甲板机械 术语和符号
    China National Standards
    Nd

    English PDF
    GB/T 21482-2008 Ships aNd marine technology - Pneumatic rubber fenders
    船舶与海上技术 充气橡胶靠球
    China National Standards
    Nd

    English PDF
    GB/T 21481.2-2008 Ships aNd marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation
    船舶与海上技术 船舶和海上结构物上生活用水供应 第2部分: 计算方法
    China National Standards
    Nd

    English PDF
    GB/T 21481.1-2008 Ships aNd marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design
    船舶与海上技术 船舶和海上结构物上生活用水供应 第1部分: 规划和设计
    China National Standards
    Nd

    English PDF
    GB/T 21480-2008 Ships aNd marine technology - Drain facilities from oil and water tanks
    船舶与海上技术 油舱及水舱放泄装置
    China National Standards
    Nd

    English PDF
    GB/T 21479.2-2008 Ships aNd marine technology-Propulsion plants for ships - Part 2:Vocabulary for controllable-pitch propeller plants
    船舶与海上技术 船用推进装置 第2部分: 可调螺距螺旋桨装置词汇
    China National Standards
    Nd

    English PDF
    GB/T 21479.1-2008 Ships aNd marine technology - Propulsion plants for ships - Part 1: Vocabulary for geometry of propellers
    船舶与海上技术 船用推进装置 第1部分: 螺旋桨几何学词汇
    China National Standards
    Nd

    English PDF
    GB/T 21478-2008 Ships aNd marine technology - Marine environment protection - Terminology relating to oil spill response
    船舶与海上技术 海上环境保护 溢油处理相关术语
    China National Standards
    Nd

    English PDF
    GB/T 21477-2008 Ships aNd marine technology - Fire resistance of hose assemblies - Test methods
    船舶及海上技术 软管组件的耐火性能 试验方法
    China National Standards
    Nd

    English PDF
    GB/T 21476-2008 Ships aNd marine technology - Fire resistance of hose assemblies - Requirements for the test bench
    船舶与海上技术 软管组件的耐火性能 试验台要求
    China National Standards
    Nd

    English PDF
    GB/T 21475-2008 Shipbuilding - Colours of iNdicator lights
    造船 指示灯颜色
    China National Standards
    Nd

    English PDF
    GB/T 16301-2008 Measurement aNd evaluation of vibration severity for marine engine-room auxiliaries
    船舶机舱辅机振动烈度的测量和评价
    China National Standards
    Nd

    English PDF
    GB/T 14090-2008 Terminology for offshore oil aNd gas development engineering
    海上油气开发工程术语
    China National Standards
    Nd

    English PDF
    GB/T 12928-2008 Marine reciprocating air compressor for medium pressure aNd low pressure
    船用中低压活塞空气压缩机
    China National Standards
    Nd

    English PDF
    GB/T 11035-2008 Marine electric two spiNdle screw pump
    船用电动双螺杆泵
    China National Standards
    Nd

    English PDF
    GB/T 10832-2008 General specification for centrifigual aNd vortex pumps of ship
    船用离心泵、旋涡泵通用技术条件
    China National Standards
    Nd

    English PDF
    GB/T 20485.22-2008 Methods for the calibration of vibration aNd shock transducers - Part 22: Shock calibration by comparison to a reference transducer
    振动与冲击传感器校准方法 第 22部分:冲击比较法校准
    China National Standards
    Nd

    English PDF
    GB/T 20485.12-2008 Methods for the calibration of vibration aNd shock transducers - Part 12: Primary vibration calibration by the reciprocity method
    振动与冲击传感器校准方法 第12部分:互易法振动绝对校准
    China National Standards
    Nd

    English PDF
    GB/T 20485.1-2008 Methods for the calibration of vibration aNd shock transducers - Part 1: Basic concepts
    振动与冲击传感器校准方法 第1部分: 基本概念
    China National Standards
    Nd

    English PDF
    GB/T 3632-2008 Sets of torshear type high strength bolt hexagon nut aNd plain washer for steel structures
    钢结构用扭剪型高强度螺栓连接副
    China National Standards
    Nd

    English PDF
    GB/T 7813-2008 Rolling bearings - Split type plummer block housings - BouNdary dimensions
    滚动轴承 剖分立式轴承座 外形尺寸
    China National Standards
    Nd

    English PDF
    GB/T 6060.3-2008 Surface roughness comparison specimen - Part 3:Spark-eroded,shot-blasted,grit-blasted,lapped,filed aNd polished surface
    表面粗糙度比较样块 第3部分:电火花、抛(喷)丸、喷砂、研磨、锉、抛光加工表面
    China National Standards
    Nd

    English PDF
    GB/T 5859-2008 Rolling bearings - Self -aligning thrust roller bearings - BouNdary dimensions
    滚动轴承 推力调心滚子轴承 外形尺寸
    China National Standards
    Nd

    English PDF
    GB/T 300-2008 Rolling bearings - Four row tapered roller bearings - BouNdary dimensions
    滚动轴承 四列圆锥滚子轴承 外形尺寸
    China National Standards
    Nd

    English PDF
    GB/T 299-2008 Rolling bearings - Double row tapered roller bearings - BouNdary dimensions
    滚动轴承 双列圆锥滚子轴承 外形尺寸
    China National Standards
    Nd

    English PDF
    GB/T 21472-2008 Stainless steel beNds and tees for the food industry
    食品工业用不锈钢弯头和三通
    China National Standards
    Nd

    English PDF
    GB/T 21471-2008 Machining allowances aNd tolerances for steel open die forgings on hammer - Shafts
    锤上钢质自由锻件机械加工余量与公差 轴类
    China National Standards
    Nd

    English PDF
    GB/T 21470-2008 Machining allowances aNd tolerances for steel open die forgings on hammer - Disks, columns, rings and seamless cylindrical sleeves
    锤上钢质自由锻件机械加工余量与公差 盘、柱、环、筒类
    China National Standards
    Nd

    English PDF
    GB/T 21469-2008 Machining allowances aNd tolerances for steel open die forgings on hammer - General requirement
    锤上钢质自由锻件机械加工余量与公差 一般要求
    China National Standards
    Nd

    English PDF
    GB/T 21468-2008 Pallet stackers aNd high-lift platform trucks - Stability tests
    托盘堆垛车和高起升平台堆垛车 稳定性试验
    China National Standards
    Nd

    English PDF
    GB/T 21467-2008 INdustrial trucks operating in special condition of stacking with mast titled forward - Additional stability test
    工业车辆在门架前倾的特定条件下堆垛作业 附加稳定性试验
    China National Standards
    Nd

    English PDF
    GB/T 21466.3-2008 Hydrodynamic plain journal bearings uNder steady-state conditions - Circular cylindrical bearings - Part 3: Permissible operational parameters
    稳态条件下流体动压径向滑动轴承 圆形滑动轴承 第3部分:许用的运行参数
    China National Standards
    Nd

    English PDF
    GB/T 21466.2-2008 Hydrodynamic plain journal bearings uNder steady-state conditions - Circular cylindrical bearings - Part 2: Functions used in the calculation procedure
    稳态条件下流体动压径向滑动轴承 圆形滑动轴承 第2部分:计算过程中所用函数
    China National Standards
    Nd

    English PDF
    GB/T 21466.1-2008 Hydrodynamic plain journal bearings uNder steady-state conditions - Circular cylindrical bearings -- Part 1: Calculation procedure
    稳态条件下流体动压径向滑动轴承 圆柱滑动轴承 第1部分:计算过程
    China National Standards
    Nd

    English PDF
    GB/T 19582.3-2008 Modbus iNdustrial automation network specification - Part 3: Modbus protocol implementation guide over TCP/IP
    基于Modbus协议的工业自动化网络规范 第3部分:Modbus协议在TCP/IP上的实现指南
    China National Standards
    Nd

    English PDF
    GB/T 19582.2-2008 Modbus iNdustrial automation network specification-Part 2:Modbus protocol implementation guide over serial link
    基于Modbus协议的工业自动化网络规范 第2部分:Modbus协议在串行链路上的实现指南
    China National Standards
    Nd

    English PDF
    GB/T 19582.1-2008 Modbus iNdustrial automation network specification - Part 1: Modbus application protocol
    基于Modbus协议的工业自动化网络规范 第1部分:Modbus应用协议
    China National Standards
    Nd

    English PDF
    GB/T 21474-2008 Guideline for the assessment on the reuse aNd recycling system of waste electrical and electronic equipment
    废弃电子电气产品再使用及再生利用体系评价导则
    China National Standards
    Nd

    English PDF
    GB/T 4649-2008 Ethylene glycol for iNdustrial Use-Specification
    工业用乙二醇
    China National Standards
    Nd

    English PDF
    GB/T 21461.2-2008 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding aNd extrusion materials - Part 2: Preparation of test specimens and determination of properties
    塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分: 试样制备和性能测定
    China National Standards
    Nd

    English PDF
    GB/T 21460.2-2008 Plastics - Styrene/acrylonitrile(SAN) moulding aNd extrusion materials - Part 2: Preparation of test specimens and determination of properties
    塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第2部分: 试样制备和性能测定
    China National Standards
    Nd

    English PDF
    GB/T 14571.4-2008 Ethylene glycol for iNdustrial use - Determination of ultraviolet transmittance - Ultraviolet spectrophotometric method
    工业用乙二醇紫外透光率的测定 紫外分光光度法
    China National Standards
    Nd

    English PDF
    GB/T 14571.3-2008 Ethylene glycol for iNdustrial use - Determination of content of total aldehydes present - Spectrophotometric method
    工业用乙二醇中醛含量的测定 分光光度法
    China National Standards
    Nd

    English PDF
    GB/T 14563-2008 Specification aNd test method of Kaolin clay
    高岭土及其试验方法
    China National Standards
    Nd

    English PDF
    GB/T 21457-2008 Cranes aNd related equipment - Accuracy requirements for measuring parameters during testing
    起重机和相关设备 试验中参数的测量精度要求
    China National Standards
    Nd

    English PDF
    GB 21454-2008 The minimum allowable values of the IPLV aNd energy efficiency grades for multi-connected air-condition(heat pump) unit
    多联式空调(热泵)机组能效限定值及能源效率等级
    China National Standards
    Nd

    English PDF
    GB/T 21437.2-2008 Road vehicles - Electrical disturbances from coNduction and coupling - Part 2: Electrical transient conduction along supply lines only
    道路车辆 由传导和耦合引起的电骚扰 第2部分:沿电源线的电瞬态传导
    China National Standards
    Nd

    English PDF
    GB/T 21499-2008 Rice - Determinaton of the potential milling yield from paddy aNd from husked rice
    大米 稻谷和糙米潜在出米率的测定
    China National Standards
    Nd

    English PDF
    GB/T 3410.1-2008 Instrument for dam monitoring joint meter - Part 1: UnboNded elastic wire resistance joint meter
    大坝监测仪器 测缝计 第1部分:差动电阻式测缝计
    China National Standards
    Nd

    English PDF
    GB/T 3408.1-2008 Instrument for dam monitoring strain meter - Part 1: UnboNded elastic wire resistance strain meter
    大坝监测仪器 应变计 第1部分:差动电阻式应变计
    China National Standards
    Nd

    English PDF
    GB/T 21441-2008 Olive flouNder
    牙鲆
    China National Standards
    Nd

    English PDF
    GB/T 17434-2008 Specifications for marine fire-resistant wiNdows
    船用耐火窗技术条件
    China National Standards
    Nd

    English PDF
    GB/T 21453-2008 General principles of stipulating the guidelines for cleaner production audit INdustry sectors
    工业清洁生产审核指南编制通则
    China National Standards
    Nd

    English PDF
    GB/T 8928-2008 StaNdard test method for density of semi-solid and solid asphalt
    固体和半固体石油沥青密度测定法
    China National Standards
    Nd

    English PDF
    GB/T 8927-2008 Petroleum aNd liquid petroleum products-Temperature measurement - Manual methods
    石油和液体石油产品温度测量 手工法
    China National Standards
    Nd

    English PDF
    GB/T 5018-2008 StaNdard test method for determining corrosion preventive properties of lubricating greases
    润滑脂防腐蚀性试验法
    China National Standards
    Nd

    English PDF
    GB/T 21451.4-2008 Petroleum aNd liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Part 4: Measurement of temperature in atmospheric tanks
    石油和液体石油产品 储罐中液位和温度自动测量法 第4部分: 常压罐中的温度测量
    China National Standards
    Nd

    English PDF
    GB/T 21450-2008 Crude petroleum aNd petroleum products - Compressibility factors for hydrocarbons in the range 638 kg/m3 to 1074 kg/m3
    原油和石油产品 密度在638kg/m3到1074 kg/m3范围内的烃压缩系数
    China National Standards
    Nd

    English PDF
    GB/T 1793-2008 StaNdard test method for water reaction of aviation fuels
    航空燃料水反应试验法
    China National Standards
    Nd

    English PDF
    GB/T 11143-2008 StaNdard test method for rust-preventing characteristics of inhibited mineral oil in the presence of water
    加抑制剂矿物油在水存在下防锈性能试验法
    China National Standards
    Nd

    English PDF
    GB/T 21448-2008 Specification of cathodic protection for uNderground steel pipelines
    埋地钢质管道阴极保护技术规范
    China National Standards
    Nd

    English PDF
    GB/T 21446-2008 Measurement of natural gas flow by means of staNdard orifice meter
    用标准孔板流量计测量天然气流量
    China National Standards
    Nd

    English PDF
    GB/T 21445.2-2008 Petroleum aNd natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications
    石油天然气工业 海底生产系统的设计和操作 第2部分:用于海底和海上的挠性管系统
    China National Standards
    Nd

    English PDF
    GB/T 21383-2008 Coefficient of initial retroreflected luminance of newly applied pavement marking aNd test method
    新划路面标线初始逆反射亮度系数及测试方法
    China National Standards
    Nd

    English PDF
    GB/T 21380-2008 Nighttime photometric performance aNd test method of retroreflective pedestrian markings
    行人反光标识夜间光度性能及测试方法
    China National Standards
    Nd

    English PDF
    GB/T 21379-2008 Classification aNd coding of the attribute of traffic management information - City road
    交通管理信息属性分类与编码 城市道路
    China National Standards
    Nd

    English PDF
    GB/T 21394-2008 Road traffic information service -Information classifying aNd coding
    道路交通信息服务 信息分类与编码
    China National Standards
    Nd

    English PDF
    GB/T 21393-2008 The methods of statistics aNd analysis for energy consumption of highway transportation
    公路运输能源消耗统计及分析方法
    China National Standards
    Nd

    English PDF
    GB/T 21392-2008 The methods of statistics aNd analysis of energy consumption in shipping transportation
    船舶运输能源消耗统计及分析方法
    China National Standards
    Nd

    English PDF
    GB/T 6573-2008 Cooling water radiator for tractor diesel engines - Method of iNdentifcation symbols
    拖拉机柴油机散热器型号编制方法
    China National Standards
    Nd

    English PDF
    GB/T 6236-2008 Tractors aNd machinery for agricultural and forestry - Seat index point
    农林拖拉机和机械 驾驶座标志点
    China National Standards
    Nd

    English PDF
    GB/T 6072.1-2008 Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel aNd lubricating oil consumptions, and test methods - Additional requirements for engines for general use
    往复式内燃机 性能 第1部分:功率、燃料消耗和机油消耗的标定及试验方法 通用发动机的附加要求
    China National Standards
    Nd

    English PDF
    GB/T 5143-2008 lNdustrial trucks - Overhead guards - Specification and testing
    工业车辆 护顶架 技术要求和试验方法
    China National Standards
    Nd

    English PDF
    GB/T 3373-2008 Tractors aNd machinery for agriculture and forestry - Rims
    农林拖拉机和机械 轮辋
    China National Standards
    Nd

    English PDF
    GB/T 2780-2008 Drawbars for agricultural tractors - Types dimensionsaNd mounting requirements
    农业拖拉机 牵引装置型式尺寸和安装要求
    China National Standards
    Nd

    English PDF
    GB/T 21407-2008 Doubly fed variable speed constant frequency wiNd turbine
    双馈式变速恒频风力发电机组
    China National Standards
    Nd

    English PDF
    GB/T 21405-2008 Reciprocating intenal combustion engines - Determination aNd method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178
    往复式内燃机 发动机功率的确定和测量方法 排气污染物排放试验的附加要求
    China National Standards
    Nd

    English PDF
    GB/T 21404-2008 Internal combustion engine - Determination aNd method for the measurement of engine power - General requirements
    内燃机 发动机功率的确定和测量方法 一般要求
    China National Standards
    Nd

    English PDF
    GB/T 21400.2-2008 Traveller irrigation machines - Part 2: Softwall hose aNd couplings - Test methods
    绞盘式喷灌机 第2部分: 软管和接头 试验方法
    China National Standards
    Nd

    English PDF
    GB/T 21400.1-2008 Traveller irrigation machines - Part 1: Operational characteristics aNd laboratory and field test methods
    绞盘式喷灌机 第1部分:运行特性及实验室和田间试验方法
    China National Standards
    Nd

    English PDF
    GB/T 21398-2008 Agricultural aNd forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria
    农林机械 电磁兼容性 试验方法和验收规则
    China National Standards
    Nd

    English PDF
    GB/T 20969.5-2008 Special environmental coNdition - Machinery for plateau - Part 5: Guide rule of test for plateau natural environment - Construction machinery
    特殊环境条件 高原机械 第5部分:高原自然环境试验导则 工程机械
    China National Standards
    Nd

    English PDF
    GB/T 20969.4-2008 Special environmental coNdition - Machinery for plateau - Part 4: Guide rule of test for plateau natural environment - Internal combustion engines
    特殊环境条件 高原机械 第4部分:高原自然环境试验导则 内燃动力机械
    China National Standards
    Nd

    English PDF
    GB/T 14786-2008 Tractors aNd machinery for agriculture and forestry - Test methods of the driving wheels torsion fatigue
    农林拖拉机和机械 驱动车轮扭转疲劳试验方法
    China National Standards
    Nd

    English PDF
    GB/T 14785-2008 Tractors aNd machiney for agricultural and forestry - Test methods of wheels side load fatigue
    农林拖拉机和机械 车轮侧向负载疲劳试验方法
    China National Standards
    Nd

    English PDF
    GB/T 6316-2008 Vernier, dial aNd digital indicating gear tooth callipers
    游标、带表和数显齿厚卡尺
    China National Standards
    Nd

    English PDF
    GB/T 6315-2008 Vernier, dial aNd digital display universal bevel protractors
    游标、带表和数显万能角度尺
    China National Standards
    Nd

    English PDF
    GB/T 21390-2008 Vernier, dial aNd digital display height callipers
    游标、带表和数显高度卡尺
    China National Standards
    Nd

    English PDF
    GB/T 21389-2008 Vernier, dial aNd digital display calipers
    游标、带表和数显卡尺
    China National Standards
    Nd

    English PDF
    GB/T 21388-2008 Vernier, dial aNd digital display depth callipers
    游标、带表和数显深度卡尺
    China National Standards
    Nd

    English PDF
    GB/T 12236-2008 Steel swing check valve for petroleum, petrochemical aNd allied industries
    石油、化工及相关工业用的钢制旋启式止回阀
    China National Standards
    Nd

    English PDF
    GB/T 21424-2008 Low-speed goods vehicles fuel tank - Safety property requirements aNd test methods
    低速货车燃油箱 安全性能要求和试验方法
    China National Standards
    Nd

    English PDF
    GB/T 21423-2008 Tri-wheel vehicles fuel tank - Safety property requirements aNd test methods
    三轮汽车燃油箱 安全性能要求和试验方法
    China National Standards
    Nd

    English PDF
    GB/T 21409-2008 Glass plant,pipeline aNd fitting - General rules for testing, handling and use
    玻璃设备、管道和管件 检验、安装和使用的一般规则
    China National Standards
    Nd

    English PDF

    Find out:27370Items   |  To Page of: First -Previous-Next -Last  | [209] [210] [211] [212] [213] [214] [215]

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards